Summary:
Per discussion in D28616, having two ways two request logging (log
enable lldb XXX verbose && log enable -v lldb XXX) is confusing. This
removes the first option and standardizes all code to use the second
one.
I've added a LLDB_LOGV macro as a shorthand for if(log &&
log->GetVerbose()) and switched most of the affected log statements to
use that (I've only left a couple of cases that were doing complex
computations in an if(log) block).
Reviewers: jingham, zturner
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D29510
llvm-svn: 294113
This moves the following classes from Core -> Utility.
ConstString
Error
RegularExpression
Stream
StreamString
The goal here is to get lldbUtility into a state where it has
no dependendencies except on itself and LLVM, so it can be the
starting point at which to start untangling LLDB's dependencies.
These are all low level and very widely used classes, and
previously lldbUtility had dependencies up to lldbCore in order
to use these classes. So moving then down to lldbUtility makes
sense from both the short term and long term perspective in
solving this problem.
Differential Revision: https://reviews.llvm.org/D29427
llvm-svn: 293941
We started passing the list of libraries to link to the
add_lldb_unittest macro, but that macro wasn't actually doing anything
with them. Fix that.
llvm-svn: 293913
Summary:
Problem:
There are three filelds in the ELF header - e_phnum, e_shnum, and e_shstrndx -
that could be bigger than 64K and therefore do not fit in 16 bits reserved for
them in the header. If this happens, pretty often there is a special section at
index 0 which contains their real values for these fields in the section header
in the fields sh_info, sh_size, and sh_link respectively.
Fix:
- Rename original fields in the header declaration. We want to have them around
just in case.
- Reintroduce these fields as 32-bit members at the end of the header. By default
they are initialized from the header in Parse() method.
- In Parse(), detect the situation when the header might have been extended into
section info #0 and try to read it from the same data source.
- ObjectFileELF::GetModuleSpecifications accesses some of these fields but the
original parse uses too small data source. Re-parse the header if necessary
using bigger data source.
- ProcessElfCore::CreateInstance uses header with potentially sentinel values,
but it does not access these fields, so a comment here is enough.
Reviewers: labath
Reviewed By: labath
Subscribers: davidb, lldb-commits, mgorny
Differential Revision: https://reviews.llvm.org/D29095
Author: Eugene Birukov <eugenebi@hotmail.com>
llvm-svn: 293714
This adds the LLDB_LOG macro, which enables one to write more succinct log
statements.
if (log)
log->Printf("log something: %d", var);
becomes
LLDB_LOG(log, "log something: {0}, var);
The macro still internally does the "if(log)" dance, so the arguments are only
evaluated if logging is enabled, meaning it has the same overhead as the
previous syntax.
Additionally, the log statements will be automatically prefixed with the file
and function generating the log (if the corresponding new argument to the "log
enable" command is enabled), so one does not need to manually specify this in
the log statement.
It also uses the new llvm formatv syntax, which means we don't have to worry
about PRIx64 macros and similar, and we can log complex object (llvm::StringRef,
lldb_private::Error, ...) more easily.
Differential Revision: https://reviews.llvm.org/D27459
llvm-svn: 292360
Summary:
PrependPathComponent was unconditionally inserting path separators between the
path components. This is not correct if the prepended path is "/", which caused
problems down the line. Fix the function to use the same algorithm as
AppendPathComponent and add a test. This fixes one part of llvm.org/pr31611.
Reviewers: clayborg, zturner
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D28677
llvm-svn: 292100
Summary:
The formatter supports the same options as the string-like classes, i.e. the
ability to truncate the displayed string. I don't anticipate it would be much
used, but it seems consistent.
Reviewers: zturner, clayborg
Subscribers: mgorny, lldb-commits
Differential Revision: https://reviews.llvm.org/D28519
llvm-svn: 291759
Previously it failed to handle nested types inside templated classes
making it impossible to look up these types using the fully qualified
name.
Differential revision: https://reviews.llvm.org/D28466
llvm-svn: 291559
Split the PDB tests into DWARF test and actual PDB tests, the latter
requiring DIA SDK. Use the new LLVMConfig.cmake LLVM_ENABLE_DIA_SDK
symbol to enable the PDB tests rather than relying on
llvm/Config/config.h private include file that is not available when
building standalone.
Differential Revision: https://reviews.llvm.org/D26249
llvm-svn: 290819
This adds formatv-backed formatting functions in various
places in LLDB such as StreamString, logging, constructing
error messages, etc. A couple of callsites are changed
from Printf style syntax to formatv style syntax to
illustrate its usage. Additionally, a FileSpec formatter
is introduced so that FileSpecs can be formatted natively.
Differential Revision: https://reviews.llvm.org/D27632
llvm-svn: 289922
LLVM build trees export the gtest library through a special export set. If you're building against a build tree you shouldn't need to re-add gtest, but if you're building against an installed LLVM you do.
llvm-svn: 288691
The core of the function was actually handling them correctly. However, the
early exit was being too optimistic and did not give the function a chance to
fire if the path did not contain dots as well.
Fix that and add a couple of unit tests.
llvm-svn: 288247
Summary:
Communication classes use the Timeout<> class to specify the timeout. Listener
class was converted to chrono some time ago, but it used a different meaning for
a timeout of zero (Listener: infinite wait, Communication: no wait). Instead,
Listener provided separate functions which performed a non-blocking event read.
This converts the Listener class to the new Timeout class, to improve
consistency. It also allows us to get merge the different GetNextEvent*** and
WaitForEvent*** functions into one. No functional change intended.
Reviewers: jingham, clayborg, zturner
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D27136
llvm-svn: 288238
This replaces the raw integer timeout parameters in the class with their
chrono-based equivalents. To achieve this, I have moved the Timeout class to a
more generic place and added a quick unit test for it.
llvm-svn: 287920
the chrono library there uses long long as the underlying chrono type, but
defines int64_t as long (or the other way around, I am not sure). In any case,
this caused the implicit conversion to not trigger. This should address that.
Also fix up the relevant unit test.
llvm-svn: 287867
This is a large API change that removes the two functions from
StreamString that return a std::string& and a const std::string&,
and instead provide one function which returns a StringRef.
Direct access to the underlying buffer violates the concept of
a "stream" which is intended to provide forward only access,
and makes porting to llvm::raw_ostream more difficult in the
future.
Differential Revision: https://reviews.llvm.org/D26698
llvm-svn: 287152
This is forcing to use Error::success(), which is in a wide majority
of cases a lot more readable.
Differential Revision: https://reviews.llvm.org/D26481
llvm-svn: 286561
The mock server was listening for only one packet (I forgot to put a loop around
it), which caused the client to stall in debug builds, as the timeout there is
1000 seconds. In case of a release builds the test would just silently succeed as
the tested function does not check or report errors (which should be fixed).
This fixes the test by adding the server loop. Since the test was taking quite a
long time now (8s), I have added a parameter to control the amount of data sent
(default 4MB), and call it with a smaller value in the test, to make the test run
faster.
llvm-svn: 285992
I did not take into account that the output of the Dump function will be
non-deterministic. Fix that by increasing of the times, this also makes the test
check that the dump function sorts the output.
llvm-svn: 285892
Summary:
While removing TimeValue from this class I noticed a lot of room for small
simplifications here. Main are:
- instead of complicated start-stop dances to compute own time, each Timer
just starts the timer once, and keeps track of the durations of child
timers. Then the own time can be computed at the end by subtracting the two
values.
- remove double accounting in TimerStack - the stack object already knows the
number of timers.
The interface does not lend itself well to unit testing, but I have added a
couple of tests which can (and did) catch any obvious errors.
Reviewers: tberghammer, clayborg
Subscribers: mgorny, lldb-commits
Differential Revision: https://reviews.llvm.org/D26243
llvm-svn: 285890
Include the gtest utility directory from LLVM sources when performing
a stand-alone build of LLDB. This is necessary to have a correct gtest
library to link tests against, as the one used by LLVM is not installed
(and not supposed to be). This is the same approach as used in clang.
Differential Revision: https://reviews.llvm.org/D26245
llvm-svn: 285865
Summary:
The only usage there was in GetModificationTime(). I also took the opportunity
to move this function from FileSpec to the FileSystem class - since we are
using FileSpecs to also represent remote files for which we cannot (easily)
retrieve modification time, it makes sense to make the decision to get the
modification time more explicit.
The new function returns a llvm::sys::TimePoint<>. To aid the transition
from TimeValue, I have added a constructor to it which enables implicit
conversion from a time_point.
Reviewers: zturner, clayborg
Subscribers: mehdi_amini, tberghammer, danalbert, beanz, mgorny, lldb-commits
Differential Revision: https://reviews.llvm.org/D25392
llvm-svn: 285702
for floating point registers was not recording them correctly. I needed to
change the EmulateInstructionARM64 unwind plans from using the DWARF
register numbering scheme to using the LLDB register numbering scheme
(because dwarf doesn't define register numbers for the 64-bit "d" registers).
Updated the EmulateInstructionARM64 unit tests to work with the LLDB
register numbering scheme and added a unit test to check the floating
point register spills & restores are correctly recorded.
https://reviews.llvm.org/D25864
<rdar://problem/28745483>
llvm-svn: 285662
Summary:
Most of the changes are very straight-forward, the only tricky part was the
"packet speed-test" function, which is very time-heavy. As the function was
completely untested, I added a quick unit smoke test for it.
Reviewers: clayborg, zturner
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D25391
llvm-svn: 285602
Summary:
.. handling for windows path was completely broken because the function was
expecting \ as path separators, but we were passing it normalized file paths,
where these have been replaced by forward slashes. Apart from this, the function
was incorrect for posix paths as well in some corner cases, as well as being
generally hard to follow.
The corner cases were:
- /../bar -> should be same as /bar
- /bar/.. -> should be same as / (slightly dodgy as the former depends on /bar actually
existing, but since we're doing it in an abstract way, I think the
transformation is reasonable)
I rewrite the function to fix these corner cases and handle windows paths more
correctly. The function should now handle the posix paths (modulo symlinks, but
we cannot really do anything about that without a real filesystem). For windows
paths, there are a couple of corner cases left, mostly to do with drive letter
handling, which cannot be fixed until the rest of the class understands drive
letters better.
Reviewers: clayborg, zturner
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D26081
llvm-svn: 285593
Summary:
This plugin resembles the already existing Windows-only Minidump plugin.
The WinMinidumpPlugin uses the Windows API for parsing Minidumps
while this plugin is cross-platform because it includes a Minidump
parser (which is already commited)
It is able to produce a backtrace, to read the general puprose regiters,
inspect local variables, show image list, do memory reads, etc.
For now the only arches that this supports are x86_32 and x86_64.
This is because I have only written register contexts for those.
Others will come in next CLs.
I copied the WinMinidump tests and adapted them a little bit for them to
work with the new plugin (and they pass)
I will add more tests, aiming for better code coverage.
There is still functionality to be added, see TODOs in code.
Reviewers: labath, zturner
Subscribers: beanz, mgorny, modocache, lldb-commits, amccarth
Differential Revision: https://reviews.llvm.org/D25905
llvm-svn: 285587
Summary:
This, like the x86_64 case, reads the register values from the minidump
file, and emits a binary buffer that is ordered using the offsets from
the RegisterInfoInterface argument. That way we can reuse an existing
register context.
Added unit tests.
Reviewers: labath, zturner
Subscribers: beanz, mgorny, modocache, amccarth, lldb-commits
Differential Revision: https://reviews.llvm.org/D25832
llvm-svn: 285584
Most of them fail right now and are commented out. The main problem is handling
of backslashes on windows, but also the posix path code has a couple of issues.
llvm-svn: 285393
Summary:
Now the Minidump parser can parse the:
1) MemoryInfoList - containing region info about memory ranges (readable,
writable, executable)
2) Memory64List - this is the stuct used when the Minidump is a
full-memory one.
3) Adding filtering of the module list (shared libraries list) - there
can be mutliple records in the module list under the same name but with
different load address (e.g. when the binary has non contigious
sections). FilterModuleList eliminates the duplicated modules, leaving
the one with the lowest load addr.
Added unit tests for everything.
Reviewers: labath, zturner
Subscribers: beanz, mgorny, modocache, lldb-commits, amccarth
Differential Revision: https://reviews.llvm.org/D25569
llvm-svn: 284593
prologue, then loads & stores x20 on the stack from a different
location in the middle of the function, and then restores the
reg in the epilogue. The saving/restoring of x20 in the middle
of the function should be ignored.
llvm-svn: 283969
MSVC does not like the declaration of a terminate() function (I guess it looks
too much like std::terminate()). While I'm there, move the setup/teardown code
into the functions gtest provides for that purpose.
llvm-svn: 283870
plan generator.
Fix a small bug in EmulateInstructionARM64::GetFramePointerRegister
which was returning the stack pointer reg instead of fp, prevented
the unwinder from recognizing the switch to using the fp in a
function. (<rdar://problem/28663117>)
Add a new eContextRestoreStackPointer context hint so that the arm64
emulator can flag when the frame pointer value is copied back in to
the stack pointer and that should be used to compute the canonical
frame address again in an epilogue sequence. (<rdar://problem/28704862>)
Small changes to UnwindAssemblyInstEmulation to have a method we can
call without a live process/thread/etc for unit tests.
<rdar://problem/28663117>
<rdar://problem/28704862>
<rdar://problem/28509178>
llvm-svn: 283847
Chris Bieneman