When custom lowered, this is not called if the store is custom
lowered. Move it to be a utility function so targets can
easily expand unaligned accesses when custom lowering.
llvm-svn: 267029
For the same reason as the corresponding load change.
Note that ExpandStore is completely broken for non-byte sized element
vector stores, but preserve the current broken behavior which has tests
for it. The behavior should be the same, but now introduces a new typed
store that is incorrectly split later rather than doing it directly.
llvm-svn: 264928
On AMDGPU we want to be able to promote i64/f64 loads to v2i32.
If the access is unaligned, this would conclude that since i64 is legal,
it would convert it back to i64 and there is an endless legalization
loop.
Extract the logic for scalarizing the load into a new TargetLowering
function, where this can also replace the custom function AMDGPU
has for this.
llvm-svn: 264927
When merging stores in DAGCombiner, add check to ensure that no
dependenices exist that would cause the construction of a cycle in our
DAG. This may happen if one store has a data dependence on another
instruction (e.g. a load) which itself has a (chain) dependence on
another store being merged. These stores cannot be merged safely and
doing so results in a cycle that is discovered in LegalizeDAG.
This test is only done in cases where Antialias analysis is used (UseAA)
as non-AA store merge candidates will be merged logically after all
loads which have been checked to not alias.
Reviewers: ahatanak, spatel, niravd, arsenm, hfinkel, tstellarAMD, jyknight
Subscribers: llvm-commits, tberghammer, danalbert, srhines
Differential Revision: http://reviews.llvm.org/D18336
llvm-svn: 264461
If the operation's type has been promoted during type legalization, we
need to account for the fact that the high bits of the comparison
operand are likely unspecified.
The LHS is usually zero-extended, but MIPS sign extends it, so we have
to be slightly careful.
Patch by Simon Dardis.
llvm-svn: 264296
We were just completely ignoring the types when determining whether we could
safely emit a libcall as a tail call. This is clearly wrong.
Theoretically, we could dig deeper looking for incidental matches (much like
the generic code in Analysis.cpp does), but it's probably not worth it for the
few libcalls that exist.
llvm-svn: 264084
- Rename getATOMIC to getSYNC, as llvm will soon be able to emit both
'__sync' libcalls and '__atomic' libcalls, and this function is for
the '__sync' ones.
- getInsertFencesForAtomic() has been replaced with
shouldInsertFencesForAtomic(Instruction), so that the decision can be
made per-instruction. This functionality will be used soon.
- emitLeadingFence/emitTrailingFence are no longer called if
shouldInsertFencesForAtomic returns false, and thus don't need to
check the condition themselves.
llvm-svn: 263665
Since r230276, we support an improved legalization for f64->f16,
which goes through a temporary f32, improving codegen when
f32->f16 is legal but not f64->f16. This requires unsafe-fp-math.
However, that legalization assumed that the second step, producing
a pseudo-softened f16, had type i16. That's not true on targets
with illegal i16, such as ARM.
Use the initial f64->f16 result type instead.
llvm-svn: 257794
During selection DAG legalization, extractelement is replaced with a load
instruction. To do this, a temporary store to the stack is used unless an
existing store is found that can be re-used.
If re-using a store, the chain going out of the store must be replaced by
the one going out of the new load (this ensures that any stores that must
take place after the store happens after the load, else the value might
be overwritten before it is loaded).
The problem is, if the extractelement index is dependent on the store
replacing the chain will introduce a cycle in the selection DAG (the load
uses the index, and by replacing the chain we will make the index dependent
on the load).
To fix this, if the index is dependent on the store, the store is skipped.
This is conservative as we may end up creating an unnecessary extra store
to the stack. However, the situation is not expected to occur very often.
Differential Revision: http://reviews.llvm.org/D15330
llvm-svn: 255114
Almost all these changes are conditioned and only apply to the new
x86-64 f128 type configuration, which will be enabled in a follow up
patch. They are required together to make new f128 work. If there is
any error, we should fix or revert them as a whole.
These changes should have no impact to current configurations.
* Relax type legalization checks to accept new f128 type configuration,
whose TypeAction is TypeSoftenFloat, not TypeLegal, but also has
TLI.isTypeLegal true.
* Relax GetSoftenedFloat to return in some cases f128 type SDValue,
which is TLI.isTypeLegal but not "softened" to i128 node.
* Allow customized FABS, FNEG, FCOPYSIGN on new f128 type configuration,
to generate optimized bitwise operators for libm functions.
* Enhance related Lower* functions to handle f128 type.
* Enhance DAGTypeLegalizer::run, SoftenFloatResult, and related functions
to keep new f128 type in register, and convert f128 operators to library calls.
* Fix Combiner, Emitter, Legalizer routines that did not handle f128 type.
* Add ExpandConstant to handle i128 constants, ExpandNode
to handle ISD::Constant node.
* Add one more parameter to getCommonSubClass and firstCommonClass,
to guarantee that returned common sub class will contain the specified
simple value type.
This extra parameter is used by EmitCopyFromReg in InstrEmitter.cpp.
* Fix infinite loop in getTypeLegalizationCost when f128 is the value type.
* Fix printOperand to handle null operand.
* Enhance ISD::BITCAST node to handle f128 constant.
* Expand new f128 type for BR_CC, SELECT_CC, SELECT, SETCC nodes.
* Enhance X86AsmPrinter to emit f128 values in comments.
Differential Revision: http://reviews.llvm.org/D15134
llvm-svn: 254653
The @llvm.get.dynamic.area.offset.* intrinsic family is used to get the offset
from native stack pointer to the address of the most recent dynamic alloca on
the caller's stack. These intrinsics are intendend for use in combination with
@llvm.stacksave and @llvm.restore to get a pointer to the most recent dynamic
alloca. This is useful, for example, for AddressSanitizer's stack unpoisoning
routines.
Patch by Max Ostapenko.
Differential Revision: http://reviews.llvm.org/D14983
llvm-svn: 254404
to a simple type when lowering a truncating store of a vector type. In this
case for an EVT we'll return Expand as we should in all of the cases anyhow.
The testcase triggered at the one in VectorLegalizer::LegalizeOp, inspection
found the rest.
llvm-svn: 254061
Richard Trieu noted that UBSan detected an overflowing shift, and the obvious fix caused a crash.
What was happening was that the shiftee (1U) was indeed too small for the possible range of shifts it had to handle, but also we were using "VT.getSizeInBits()" to get the maximum type bitwidth, but we wanted "VT.getScalarSizeInBits()" to get the vector lane size instead of the entire vector size.
Use an APInt for the shift and VT.getScalarSizeInBits().
llvm-svn: 253023
Several backends have instructions to reverse the order of bits in an integer. Conceptually matching such patterns is similar to @llvm.bswap, and it was mentioned in http://reviews.llvm.org/D14234 that it would be best if these patterns were matched in InstCombine instead of reimplemented in every different target.
This patch introduces an intrinsic @llvm.bitreverse.i* that operates similarly to @llvm.bswap. For plumbing purposes there is also a new ISD node ISD::BITREVERSE, with simple expansion and promotion support.
The intention is that InstCombine's BSWAP detection logic will be extended to support BITREVERSE too, and @llvm.bitreverse intrinsics emitted (if the backend supports lowering it efficiently).
llvm-svn: 252878
- Factor out code to query and modify the sign bit of a floatingpoint
value as an integer. This also works if none of the targets integer
types is big enough to hold all bits of the floatingpoint value.
- Legalize FABS(x) as FCOPYSIGN(x, 0.0) if FCOPYSIGN is available,
otherwise perform bit manipulation on the sign bit. The previous code
used "x >u 0 ? x : -x" which is incorrect for x being -0.0! It also
takes 34 instructions on ARM Cortex-M4. With this patch we only
require 5:
vldr d0, LCPI0_0
vmov r2, r3, d0
lsrs r2, r3, #31
bfi r1, r2, #31, #1
bx lr
(This could be further improved if the compiler would recognize that
r2, r3 is zero).
- Only lower FCOPYSIGN(x, y) = sign(x) ? -FABS(x) : FABS(x) if FABS is
available otherwise perform bit manipulation on the sign bit.
- Perform the sign(x) test by masking out the sign bit and comparing
with 0 rather than shifting the sign bit to the highest position and
testing for "<s 0". For x86 copysignl (on 80bit values) this gets us:
testl $32768, %eax
rather than:
shlq $48, %rax
sets %al
testb %al, %al
Differential Revision: http://reviews.llvm.org/D11172
llvm-svn: 252839
This allows avoiding the default Expand behavior which
introduces stack usage. Bitcast the scalar and replace
the missing elements with undef.
This is covered by existing tests and used by a future
commit which makes 64-bit vectors legal types on AMDGPU.
llvm-svn: 252632
This is for AMDGPU to implement v2i64 extract as extract of
half of a v4i32.
This is covered by existing tests and used by a future
commit which makes 64-bit vectors legal types on AMDGPU.
llvm-svn: 252630
This will be used in future commits for AMDGPU to promote
operations on i64 vectors into operations on 32-bit vector
components.
This will be used / tested in future AMDGPU commits.
llvm-svn: 250945
Summary:
TargetLoweringBase::Expand is defined as "Try to expand this to other ops,
otherwise use a libcall." For ISD::UDIV and ISD::SDIV, the choice between
the two possibilities was defined in a rather convoluted way:
- if DIVREM is legal, expand to DIVREM
- if DIVREM has a custom lowering, expand to DIVREM
- if DIVREM libcall is defined and a remainder from the same division is
computed elsewhere, expand to a DIVREM libcall
- else, expand to a DIV libcall
This had the undesirable effect that if both DIV and DIVREM are implemented
as libcalls, then ISD::UDIV and ISD::SDIV are expanded to the heavier DIVREM
libcall, even when the remainder isn't used.
The new code adds a new LegalizeAction, TargetLoweringBase::LibCall, so that
backends can directly control whether they prefer an expansion or a conversion
to a libcall. This makes the generic lowering code even more generic,
allowing its reuse in a wider range of target-specific configurations.
The useful effect is that ARM backend will now generate a call
to __aeabi_{i,u}div rather than __aeabi_{i,u}divmod in cases where
it doesn't need the remainder. There's no functional change outside
the ARM backend.
Reviewers: t.p.northover, rengolin
Subscribers: t.p.northover, llvm-commits, aemerson
Differential Revision: http://reviews.llvm.org/D13862
llvm-svn: 250826
Summary:
In addition to moving the code over, this patch amends the DIV,REM -> DIVREM
combining to run on all affected nodes at once: if the nodes are converted
to DIVREM one at a time, then the resulting DIVREM may get legalized by the
backend into something target-specific that we won't be able to recognize
and correlate with the remaining nodes.
The motivation is to "prepare terrain" for D13862: when we set DIV and REM
to be legalized to libcalls, instead of the DIVREM, we otherwise lose the
ability to combine them together. To prevent this, we need to take the
DIV,REM -> DIVREM combining out of the lowering stage.
Reviewers: RKSimon, eli.friedman, rengolin
Subscribers: john.brawn, rengolin, llvm-commits
Differential Revision: http://reviews.llvm.org/D13733
llvm-svn: 250825
After D10403, we had FMF in the DAG but disabled by default. Nick reported no crashing errors after some stress testing,
so I enabled them at r243687. However, Escha soon notified us of a bug not covered by any in-tree regression tests:
if we don't propagate the flags, we may fail to CSE DAG nodes because differing FMF causes them to not match. There is
one test case in this patch to prove that point.
This patch hopes to fix or leave a 'TODO' for all of the in-tree places where we create nodes that are FMF-capable. I
did this by putting an assert in SelectionDAG.getNode() to find any FMF-capable node that was being created without FMF
( D11807 ). I then ran all regression tests and test-suite and confirmed that everything passes.
This patch exposes remaining work to get DAG FMF to be fully functional: (1) add the flags to non-binary nodes such as
FCMP, FMA and FNEG; (2) add the flags to intrinsics; (3) use the flags as conditions for transforms rather than the
current global settings.
Differential Revision: http://reviews.llvm.org/D12095
llvm-svn: 247815
Currently this hits an assert that extload should
always be supported, which assumes integer extloads.
This moves a hack out of SI's argument lowering and
is covered by existing tests.
llvm-svn: 247113
For targets that didn't support this, this will let us respect the
langref instead of failing to select.
Note that we don't need to change the 32-bit x86/PPC lowerings (to
account for the result type/# difference) because they're both
custom and bypass type legalization.
llvm-svn: 246258
Summary:
This change makes the variable argument intrinsics, `llvm.va_start` and
`llvm.va_copy`, and the `va_arg` instruction behave as they do on Windows
inside a `CallingConv::X86_64_Win64` function. It's needed for a Clang patch
I have to add support for GCC's `__builtin_ms_va_list` constructs.
Reviewers: nadav, asl, eugenis
CC: llvm-commits
Differential Revision: http://llvm-reviews.chandlerc.com/D1622
llvm-svn: 245990
Now that we can properly promote mismatched FCOPYSIGNs (r244858), we
can mark the FP_ROUND on the result as truncating, to expose folding.
FCOPYSIGN doesn't change anything but the sign bit, so
(fp_round (fcopysign (fpext a), b))
is equivalent to (modulo the sign bit):
(fp_round (fpext a))
which is a no-op.
llvm-svn: 244862
We don't care about its type, and there's even a combine that'll fold
away the FP_EXTEND if we let it run. However, until it does, we'll have
something broken like:
(f32 (fp_extend (f64 v)))
Scalar f16 follow-up to r243924.
llvm-svn: 244858
This commit removes the global manager variable which is responsible for
storing and allocating pseudo source values and instead it introduces a new
manager class named 'PseudoSourceValueManager'. Machine functions now own an
instance of the pseudo source value manager class.
This commit also modifies the 'get...' methods in the 'MachinePointerInfo'
class to construct pseudo source values using the instance of the pseudo
source value manager object from the machine function.
This commit updates calls to the 'get...' methods from the 'MachinePointerInfo'
class in a lot of different files because those calls now need to pass in a
reference to a machine function to those methods.
This change will make it easier to serialize pseudo source values as it will
enable me to transform the mips specific MipsCallEntry PseudoSourceValue
subclass into two target independent subclasses.
Reviewers: Akira Hatanaka
llvm-svn: 244693
On the code path in ExpandUnalignedLoad which expands an unaligned vector/fp
value in terms of a legal integer load of the same size, the ChainResult needs
to be the chain result of the integer load.
No in-tree test case is currently available.
Patch by Jan Hranac!
llvm-svn: 243956
Making allowableAlignment() more accessible was suggested as a predecessor patch
for D10662, so I've pulled it into TargetLowering. This let's us remove 4 instances
of duplicate logic in LegalizeDAG.
There's a subtle functional change in the implementation: the existing
allowableAlignment() code was using getPrefTypeAlignment() when checking
alignment with the DataLayout and assumed that was fast. In this implementation,
we use getABITypeAlignment() and assume that is fast. See the TODO comment or the
discussion in the Phab review for future improvements in this implementation
(don't use the data layout at all).
There are no regression test changes from this difference, and I'm not sure how to
expose it via a test. I think we actually do want to provide the 'Fast' param when
checking this from DAGCombiner::MergeConsecutiveStores(). Ie, we shouldn't merge
stores if the new stores are not going to be fast. But that change will require
fixing allowsMisalignedMemoryAccess() overrides as noted in D10662.
Differential Revision: http://reviews.llvm.org/D10905
llvm-svn: 243549
llvm.eh.sjlj.setjmp was used as part of the SjLj exception handling
style but is also used in clang to implement __builtin_setjmp. The ARM
backend needs to output additional dispatch tables for the SjLj
exception handling style, these tables however can't be emitted if
llvm.eh.sjlj.setjmp is simply used for __builtin_setjmp and no actual
landing pad blocks exist.
To solve this issue a new llvm.eh.sjlj.setup_dispatch intrinsic is
introduced which is used instead of llvm.eh.sjlj.setjmp in the SjLj
exception handling lowering, so we can differentiate between the case
where we actually need to setup a dispatch table and the case where we
just need the __builtin_setjmp semantic.
Differential Revision: http://reviews.llvm.org/D9313
llvm-svn: 242481
- Factor out code to query and modify the sign bit of a floatingpoint
value as an integer. This also works if none of the targets integer
types is big enough to hold all bits of the floatingpoint value.
- Legalize FABS(x) as FCOPYSIGN(x, 0.0) if FCOPYSIGN is available,
otherwise perform bit manipulation on the sign bit. The previous code
used "x >u 0 ? x : -x" which is incorrect for x being -0.0! It also
takes 34 instructions on ARM Cortex-M4. With this patch we only
require 5:
vldr d0, LCPI0_0
vmov r2, r3, d0
lsrs r2, r3, #31
bfi r1, r2, #31, #1
bx lr
(This could be further improved if the compiler would recognize that
r2, r3 is zero).
- Only lower FCOPYSIGN(x, y) = sign(x) ? -FABS(x) : FABS(x) if FABS is
available otherwise perform bit manipulation on the sign bit.
- Perform the sign(x) test by masking out the sign bit and comparing
with 0 rather than shifting the sign bit to the highest position and
testing for "<s 0". For x86 copysignl (on 80bit values) this gets us:
testl $32768, %eax
rather than:
shlq $48, %rax
sets %al
testb %al, %al
llvm-svn: 242107
Summary:
This change is part of a series of commits dedicated to have a single
DataLayout during compilation by using always the one owned by the
module.
Reviewers: echristo
Subscribers: jholewinski, llvm-commits, rafael, yaron.keren
Differential Revision: http://reviews.llvm.org/D11037
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 241776
Summary:
This change is part of a series of commits dedicated to have a single
DataLayout during compilation by using always the one owned by the
module.
Reviewers: echristo
Subscribers: jholewinski, ted, yaron.keren, rafael, llvm-commits
Differential Revision: http://reviews.llvm.org/D11028
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 241775
Summary:
SelectionDAG itself is not invoking directly the DataLayout in the
TargetMachine, but the "TargetLowering" class is still using it. I'll
address it in a following commit.
This change is part of a series of commits dedicated to have a single
DataLayout during compilation by using always the one owned by the
module.
Reviewers: echristo
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D11000
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 241618
The body of the loops here only contained asserts. This triggered an unused variable
warning on release builds and -Werror on the bots.
llvm-svn: 240819
The patch is generated using this command:
tools/clang/tools/extra/clang-tidy/tool/run-clang-tidy.py -fix \
-checks=-*,llvm-namespace-comment -header-filter='llvm/.*|clang/.*' \
llvm/lib/
Thanks to Eugene Kosov for the original patch!
llvm-svn: 240137
This adds new SDNodes for signed/unsigned min/max. These nodes are built from
select/icmp pairs matched at SDAGBuilder stage.
This patch adds the nodes, as well as legalization support and sets them to
be "expand" for all targets.
NFC for now; this will be tested when I switch AArch64 to using these new
nodes.
llvm-svn: 237423
to use the information in the module rather than TargetOptions.
We've had and clang has used the use-soft-float attribute for some
time now so have the backends set a subtarget feature based on
a particular function now that subtargets are created based on
functions and function attributes.
For the one middle end soft float check go ahead and create
an overloadable TargetLowering::useSoftFloat function that
just checks the TargetSubtargetInfo in all cases.
Also remove the command line option that hard codes whether or
not soft-float is set by using the attribute for all of the
target specific test cases - for the generic just go ahead and
add the attribute in the one case that showed up.
llvm-svn: 237079
Matt Arsenault