What's going on in the test case (without the patch applied) is this:
When the header is parsed, decltype(B()) is canonicalized to decltype(Y()),
because that was the first parsed equivalent decltype expression. Hence, the
TemplateSpecializationType for Id<decltype(B())> ends up with
SubstTemplateTypeParmType(T, decltype(Y())) as the AliasedType member.
When the PCH file is included and the AST reader reads Id<decltype(B())>, it
sees decltype(B()) before decltype(Y()). So, this time decltype(B()) ends up
being the canonical type for both decltypes, which leads to an assert violation
when the reader calls getSubstTemplateTypeParmType with the non-canonical
decltype(Y()) as the replacement type.
Reviewers: rsmith
Reviewed By: rsmith
CC: cfe-commits, aemerson
Differential Revision: http://llvm-reviews.chandlerc.com/D3073
llvm-svn: 204005
This is because the PCH is tied to the module files, if one of the module files changes or gets removed
the build system should re-build the PCH file.
rdar://16321245
llvm-svn: 203885
Add module dependencies to the dependency files created by -MD/-MMD/etc.
by attaching an ASTReaderListener that will call into the dependency
file generator when a module input file is seen in the serialized AST.
llvm-svn: 203208
submodule macro overriding within the same top-level module (necessary for the
testcase to be remotely reasonable). Incidentally reduces the number of libc++
testsuite regressions with modules enabled from 7 to 6.
llvm-svn: 203063
it, importers of B should not see the macro. This is complicated by the fact
that A's macro could also be visible through a different path. The rules (as
hashed out on cfe-commits) are included as a documentation update in this
change.
With this, the number of regressions in libc++'s testsuite when modules are
enabled drops from 47 to 7. Those remaining 7 are also macro-related, and are
due to remaining bugs in this change (in particular, the handling of submodules
is imperfect).
llvm-svn: 202560
the build
When Clang loads the module, it verifies the user source files that the module
was built from. If any file was changed, the module is rebuilt. There are two
problems with this:
1. correctness: we don't verify system files (there are too many of them, and
stat'ing all of them would take a lot of time);
2. performance: the same module file is verified again and again during a
single build.
This change allows the build system to optimize source file verification. The
idea is based on the fact that while the project is being built, the source
files don't change. This allows us to verify the module only once during a
single build session. The build system passes a flag,
-fbuild-session-timestamp=, to inform Clang of the time when the build started.
The build system also requests to enable this feature by passing
-fmodules-validate-once-per-build-session. If these flags are not passed, the
behavior is not changed. When Clang verifies the module the first time, it
writes out a timestamp file. Then, when Clang loads the module the second
time, it finds a timestamp file, so it can compare the verification timestamp
of the module with the time when the build started. If the verification
timestamp is too old, the module is verified again, and the timestamp file is
updated.
llvm-svn: 201224
We don't stat the system headers to check for stalenes during regular
PCH loading for performance reasons. When explicitly saying
-verify-pch, we want to check all the dependencies - user or system.
llvm-svn: 200979
This option will:
- load the given pch file
- verify it is not out of date by stat'ing dependencies, and
- return 0 on success and non-zero on error
llvm-svn: 200884
Add the ImportDecl to the set of interesting delcarations that are
deserialized eagerly when an AST file is loaded (rather than lazily like
most decls). This is required to get auto linking to work when there is
no explicit import in the main file. Also resolve a FIXME to rename
'ExternalDefinitions', since that is only one of the things that need eager
deserialization. The new name is 'EagerlyDeserializedDecls'. The corresponding
AST bitcode is also renamed.
llvm-svn: 200505
Show the top-level pch file as the culprit, rather than the immediate
dependency when a pch file imports a pcm from a module. To clarify the
relationship, the pch import stack is printed as notes. The old behaviour was
misleading when a pch imported a pcm (from a module), since removing the pcm
would not fix the problem, whereas rebuilding the pch would.
llvm-svn: 199446
This makes the C++ ABI depend entirely on the target: MS ABI for -win32 triples,
Itanium otherwise. It's no longer possible to do weird combinations.
To be able to run a test with a specific ABI without constraining it to a
specific triple, new substitutions are added to lit: %itanium_abi_triple and
%ms_abi_triple can be used to get the current target triple adjusted to the
desired ABI. For example, if the test suite is running with the i686-pc-win32
target, %itanium_abi_triple will expand to i686-pc-mingw32.
Differential Revision: http://llvm-reviews.chandlerc.com/D2545
llvm-svn: 199250
Summary:
In general, this type node can be used to represent any type adjustment
that occurs implicitly without losing type sugar. The immediate use of
this is to adjust the calling conventions of member function pointer
types without breaking template instantiation.
Fixes PR17996.
Reviewers: rsmith
Differential Revision: http://llvm-reviews.chandlerc.com/D2332
llvm-svn: 196451
This change fixes Richard's testcase for r193815. Now we include non-explicit
submodules into the list of exports.
The test failed previously because:
- recursive_visibility_a1.inner is not imported (only recursive_visibility_a1 is),
- thus the 'inner' submodule is not showing up in any of the import lists,
- and because of this getExportedModules() is not returning the
correct module set -- it only considers modules that are imported.
The fix is to make Module::getExportedModules() include non-explicit submodules
into the list of exports.
llvm-svn: 194018
requires ! feature
The purpose of this is to allow (for instance) the module map for /usr/include
to exclude <tgmath.h> and <complex.h> when building in C++ (these headers are
instead provided by the C++ standard library in this case, and the glibc C
<tgmath.h> header would otherwise try to include <complex.h>, resulting in a
module cycle).
llvm-svn: 193549
* NamedDecl and CXXMethodDecl were missing getMostRecentDecl.
* The const version can just forward to the non const.
* getMostRecentDecl can use cast instead of cast_or_null.
This then removes some casts from the callers.
llvm-svn: 193039
If we have multiple definitions of the same entity from different modules, we
nominate the first definition which we see as being the canonical definition.
If we load a declaration from a different definition and we can't find a
corresponding declaration in the canonical definition, issue a diagnostic.
This is insufficient to prevent things from going horribly wrong in all cases
-- we might be in the middle of emitting IR for a function when we trigger some
deserialization and discover that it refers to an incoherent piece of the AST,
by which point it's probably too late to bail out -- but we'll at least produce
a diagnostic.
llvm-svn: 192950
Review: http://llvm-reviews.chandlerc.com/D1546.
I have picked up this patch form Lawrence
(http://llvm-reviews.chandlerc.com/D1063) and did a few changes.
From the original change description (updated as appropriate):
This patch adds a check that ensures that modules only use modules they
have so declared. To this end, it adds a statement on intended module
use to the module.map grammar:
use module-id
A module can then only use headers from other modules if it 'uses' them.
This enforcement is off by default, but may be turned on with the new
option -fmodules-decluse.
When enforcing the module semantics, we also need to consider a source
file part of a module. This is achieved with a compiler option
-fmodule-name=<module-id>.
The compiler at present only applies restrictions to the module directly
being built.
llvm-svn: 191283
Specifically, the following features are not included in this commit:
- any sort of capturing within generic lambdas
- nested lambdas
- conversion operator for captureless lambdas
- ensuring all visitors are generic lambda aware
As an example of what compiles:
template <class F1, class F2>
struct overload : F1, F2 {
using F1::operator();
using F2::operator();
overload(F1 f1, F2 f2) : F1(f1), F2(f2) { }
};
auto Recursive = [](auto Self, auto h, auto ... rest) {
return 1 + Self(Self, rest...);
};
auto Base = [](auto Self, auto h) {
return 1;
};
overload<decltype(Base), decltype(Recursive)> O(Base, Recursive);
int num_params = O(O, 5, 3, "abc", 3.14, 'a');
Please see attached tests for more examples.
Some implementation notes:
- Add a new Declarator context => LambdaExprParameterContext to
clang::Declarator to allow the use of 'auto' in declaring generic
lambda parameters
- Augment AutoType's constructor (similar to how variadic
template-type-parameters ala TemplateTypeParmDecl are implemented) to
accept an IsParameterPack to encode a generic lambda parameter pack.
- Add various helpers to CXXRecordDecl to facilitate identifying
and querying a closure class
- LambdaScopeInfo (which maintains the current lambda's Sema state)
was augmented to house the current depth of the template being
parsed (id est the Parser calls Sema::RecordParsingTemplateParameterDepth)
so that Sema::ActOnLambdaAutoParameter may use it to create the
appropriate list of corresponding TemplateTypeParmDecl for each
auto parameter identified within the generic lambda (also stored
within the current LambdaScopeInfo). Additionally,
a TemplateParameterList data-member was added to hold the invented
TemplateParameterList AST node which will be much more useful
once we teach TreeTransform how to transform generic lambdas.
- SemaLambda.h was added to hold some common lambda utility
functions (this file is likely to grow ...)
- Teach Sema::ActOnStartOfFunctionDef to check whether it
is being called to instantiate a generic lambda's call
operator, and if so, push an appropriately prepared
LambdaScopeInfo object on the stack.
- Teach Sema::ActOnStartOfLambdaDefinition to set the
return type of a lambda without a trailing return type
to 'auto' in C++1y mode, and teach the return type
deduction machinery in SemaStmt.cpp to process either
C++11 and C++14 lambda's correctly depending on the flag.
- various tests were added - but much more will be needed.
A greatful thanks to all reviewers including Eli Friedman,
James Dennett and the ever illuminating Richard Smith. And
yet I am certain that I have allowed unidentified bugs to creep in;
bugs, that I will do my best to slay, once identified!
Thanks!
llvm-svn: 188977
The goal of this sugar node is to be able to look at an arbitrary
FunctionType and tell if any of the parameters were decayed from an
array or function type. Ultimately this is necessary to implement
Microsoft's C++ name mangling scheme, which mangles decayed arrays
differently from normal pointers.
Reviewers: rsmith
Differential Revision: http://llvm-reviews.chandlerc.com/D1014
llvm-svn: 184763
In a certain code-path we were not deserializing an anonymous field initializer correctly,
leading to a crash when trying to IRGen it.
This is a simpler version of a patch by Yunzhong Gao!
llvm-svn: 182974
Sometimes people hack on their system headers. In such cases, they'll
need to delete their module cache, but may not know where it is. Add a
note to show them where it is.
llvm-svn: 181638
the actual parser and support arbitrary id-expressions.
We're actually basically set up to do arbitrary expressions here
if we wanted to.
Assembly operands permit things like A::x to be written regardless
of language mode, which forces us to embellish the evaluation
context logic somewhat. The logic here under template instantiation
is incorrect; we need to preserve the fact that an expression was
unevaluated. Of course, template instantiation in general is fishy
here because we have no way of delaying semantic analysis in the
MC parser. It's all just fishy.
I've also fixed the serialization of MS asm statements.
This commit depends on an LLVM commit.
llvm-svn: 180976
are now two distinct canonical 'AutoType's: one is the undeduced 'auto'
placeholder type, and the other is a deduced-but-dependent type. All
deduced-to-a-non-dependent-type cases are still non-canonical.
llvm-svn: 180789
-Make sure that a deserialized external decl gets added to the TU scope.
-When associating an identifier with a set of decls, use the most recent local ones,
if they exist, otherwise associating decls from modules (that came after a local one)
will lead to an incomplete reconstructed re-declaration chain.
rdar://13712705
llvm-svn: 180634
Typo correction for an unqualified name needs to walk through all of the identifier tables of all modules.
When we have a global index, just walk its identifier table only.
rdar://13425732
llvm-svn: 179730
This is done by extending ObjCMethodList (which is only used by the global method pool) to have 2 extra bits of information.
We will later take advantage of this info in global method pool for the overridden methods calculation.
llvm-svn: 179652
don't serialize a lookup map for the translation unit outside C++ mode, so we
can't tell when lookup within the TU needs to look within modules. Only apply
the fix outside C++ mode, and only to the translation unit.
llvm-svn: 178706
Syntactically means the function macro parameter names do not need to use the same
identifiers in order for the definitions to be considered identical.
Syntactic equivalence is a microsoft extension for macro redefinitions and we'll also
use this kind of comparison to check for ambiguous macros coming from modules.
rdar://13562254
llvm-svn: 178671
This option can be useful for end users who want to know why they
ended up with a ton of different variants of the "std" module in their
module cache. This problem should go away over time, as we reduce the
need for module variants, but it will never go away entirely.
llvm-svn: 178148
the system macro uses a not identical definition compared to a macro from the clang headers.
For example (these come from different modules):
\#define LONG_MAX __LONG_MAX__ (clang's limits.h)
\#define LONG_MAX 0x7fffffffffffffffL (system's limits.h)
in which case don't mark them ambiguous to avoid the "ambiguous macro expansion" warning.
llvm-svn: 178109
For each macro directive (define, undefine, visibility) have a separate object that gets chained
to the macro directive history. This has several benefits:
-No need to mutate a MacroDirective when there is a undefine/visibility directive. Stuff like
PPMutationListener become unnecessary.
-No need to keep extra source locations for the undef/visibility locations for the define directive object
(which is the majority of the directives)
-Much easier to hide/unhide a section in the macro directive history.
-Easier to track the effects of the directives across different submodules.
llvm-svn: 178037
-Serialize the macro directives history into its own section
-Get rid of the macro updates section
-When de/serializing an identifier from a module, associate only one macro per
submodule that defined+exported it.
llvm-svn: 177761
The refactoring in r177367 introduced a serious performance bug where
the "lazy" resolution of module file names in the global module index
to actual module file entries in the module manager would perform
repeated negative stats(). The new interaction requires the module
manager to inform the global module index when a module file has been
loaded, eliminating the extraneous stat()s and a bunch of bookkeeping
on both sides.
llvm-svn: 177750
Configuration macros are macros that are intended to alter how a
module works, such that we need to build different module variants
for different values of these macros. A module can declare its
configuration macros, in which case we will complain if the definition
of a configation macro on the command line (or lack thereof) differs
from the current preprocessor state at the point where the module is
imported. This should eliminate some surprises when enabling modules,
because "#define CONFIG_MACRO ..." followed by "#include
<module/header.h>" would silently ignore the CONFIG_MACRO setting. At
least it will no longer be silent about it.
Configuration macros are eventually intended to help reduce the number
of module variants that need to be built. When the list of
configuration macros for a module is exhaustive, we only need to
consider the settings for those macros when building/finding the
module, which can help isolate modules for various project-specific -D
flags that should never affect how modules are build (but currently do).
llvm-svn: 177466
The global module index was querying the file manager for each of the
module files it knows about at load time, to prune out any out-of-date
information. The file manager would then cache the results of the
stat() falls used to find that module file.
Later, the same translation unit could end up trying to import one of the
module files that had previously been ignored by the module cache, but
after some other Clang instance rebuilt the module file to bring it
up-to-date. The stale stat() results in the file manager would
trigger a second rebuild of the already-up-to-date module, causing
failures down the line.
The global module index now lazily resolves its module file references
to actual AST reader module files only after the module file has been
loaded, eliminating the stat-caching race. Moreover, the AST reader
can communicate to its caller that a module file is missing (rather
than simply being out-of-date), allowing us to simplify the
module-loading logic and allowing the compiler to recover if a
dependent module file ends up getting deleted.
llvm-svn: 177367
In a module-enabled Cocoa PCH file, we spend a lot of time stat'ing the headers
in order to associate the FileEntries with their modules and support implicit
module import.
Use a more lazy scheme by enhancing HeaderInfoTable to store extra info about
the module that a header belongs to, and associate it with its module only when
there is a request for loading the header info for a particular file.
Part of rdar://13391765
llvm-svn: 176976
This allows resolving top-header filenames of modules to FileEntries when
we need them, not eagerly.
Note that that this breaks ABI for libclang functions
clang_Module_getTopLevelHeader / clang_Module_getNumTopLevelHeaders
but this is fine because they are experimental and not widely used yet.
llvm-svn: 176975
It passes to the visitor, that the caller provides, CXCursor_InclusionDirective cursors for
all the include directives in a particular file.
llvm-svn: 176682
Stat'ing all the headers from the PCH to make sure they are up-to-date takes significant time.
In a particular source file (whose PCH file included Cocoa.h) from total -fsyntax-only time
12% was just stat calls. Change pre-validation to only check non-system headers.
There are some notable disadvantages:
-If a system header, that is not include-guarded, changes after the PCH was created, we will not
find it in the header info table and we will #import it, effectively #importing it twice, thus
we will emit some error due to a multiple definition and after that the "header was modified" error will likely
be emitted, for example something like:
NSDictionary.h:12:1: error: duplicate interface definition for class 'NSDictionary'
@interface NSDictionary : NSObject <NSCopying, NSMutableCopying, NSSecureCoding, NSFastEnumeration>
^
NSDictionary.h:12:12: note: previous definition is here
@interface NSDictionary : NSObject <NSCopying, NSMutableCopying, NSSecureCoding, NSFastEnumeration>
^
fatal error: file 'NSDictionary.h' has been modified since the precompiled header was built
Though we get the "header was modified" error, this is a bit confusing.
-Theoretically it is possible that such a system header will cause no errors but it will just cause an
unfortunate semantic change, though I find this rather unlikely.
The advantages:
-Reduces compilation time when using a huge PCH like the Cocoa ones
-System headers change very infrequent and when they do, users/build systems should be able to know that
re-building from scratch is needed.
Addresses rdar://13056262
llvm-svn: 176567
Previously the hash would be the filename portion of the path, which could be
different for a filename with different case or a symbolic link with a different
name completely.
This did not actually create any issue so far because by validating all headers
in the PCH we created uniqued FileEntries based on inodes, so an #include of
a symbolic link (refering to a file from the PCH) would end up with a FileEntry
with filename same as the one recorded in the PCH.
llvm-svn: 176566
llvm::sys::fs::equivalent() does 2 stat calls every time it's called. Use FileManager::getFile() to take advantage
of the stat caching that FileManager is providing.
llvm-svn: 176450
Previously we would return null for an out-of-date file. This inhibited ASTReader::ReadSLocEntry
from creating a FileID to recover gracefully in such a case.
llvm-svn: 176332
its index in the preprocessed entities vector.
This is because the order of the entities in the vector can change in some (uncommon) cases.
llvm-svn: 175907
Add an ability to specify custom documentation block comment commands via a new
class CommentOptions. The intention is that this class will hold future
customizations for comment parsing, including defining documentation comments
with specific numbers of parameters, etc.
CommentOptions instance is a member of LangOptions.
CommentOptions is controlled by a new command-line parameter
-fcomment-block-commands=Foo,Bar,Baz.
llvm-svn: 175892
for the data specific to a macro definition (e.g. what the tokens are), and
MacroDirective class which encapsulates the changes to the "macro namespace"
(e.g. the location where the macro name became active, the location where it was undefined, etc.)
(A MacroDirective always points to a MacroInfo object.)
Usually a macro definition (MacroInfo) is where a macro name becomes active (MacroDirective) but
splitting the concepts allows us to better model the effect of modules to the macro namespace
(also as a bonus it allows better modeling of push_macro/pop_macro #pragmas).
Modules can have their own macro history, separate from the local (current translation unit)
macro history; MacroDirectives will be used to model the macro history (changes to macro namespace).
For example, if "@import A;" imports macro FOO, there will be a new local MacroDirective created
to indicate that "FOO" became active at the import location. Module "A" itself will contain another
MacroDirective in its macro history (at the point of the definition of FOO) and both MacroDirectives
will point to the same MacroInfo object.
Introducing the separation of macro concepts is the first part towards better modeling of module macros.
llvm-svn: 175585
This commit introduces a set of related changes to ensure that the
declaration that shows up in the identifier chain after deserializing
declarations with a given identifier is, in fact, the most recent
declaration. The primary change involves waiting until after we
deserialize and wire up redeclaration chains before updating the
identifier chains. There is a minor optimization in here to avoid
recursively deserializing names as part of looking to see whether
top-level declarations for a given name exist.
A related change that became suddenly more urgent is to property
record a merged declaration when an entity first declared in the
current translation unit is later deserialized from a module (that had
not been loaded at the time of the original declaration). Since we key
off the canonical declaration (which is parsed, not from an AST file)
for emitted redeclarations, we simply record this as a merged
declaration during AST writing and let the readers merge them.
Re-fixes <rdar://problem/13189985>, presumably for good this time.
llvm-svn: 175447
until recursive loading is finished.
Otherwise we may end up with a template trying to deserialize a template
parameter that is in the process of getting loaded.
rdar://13135282
llvm-svn: 175329
Stephan Tolksdorf