Constructors and destructors may be represented by several functions
in IR. Only base structors correspond to source code, others are
small pieces of code and eventually call the base variant. In this
case instrumentation of non-base structors has little sense, this
fix remove it. Now profile data of a declaration corresponds to
exactly one function in IR, it agrees with the current logic of the
profile data loading.
This change fixes PR24996.
Differential Revision: http://reviews.llvm.org/D15158
llvm-svn: 254876
This patch changes the generation of CGFunctionInfo to contain
the FunctionProtoType if it is available. This enables the code
generation for call instructions to look into this type for
exception information and therefore generate better quality
IR - it will not create invoke instructions for functions that
are know not to throw.
llvm-svn: 253926
functions.
This commit fixes a bug in CGOpenMPRuntime.cpp and CGObjC.cpp where
some of the function attributes are not attached to newly created
functions.
rdar://problem/20828324
Differential Revision: http://reviews.llvm.org/D13928
llvm-svn: 251476
Previously, __weak was silently accepted and ignored in MRC mode.
That makes this a potentially source-breaking change that we have to
roll out cautiously. Accordingly, for the time being, actual support
for __weak references in MRC is experimental, and the compiler will
reject attempts to actually form such references. The intent is to
eventually enable the feature by default in all non-GC modes.
(It is, of course, incompatible with ObjC GC's interpretation of
__weak.)
If you like, you can enable this feature with
-Xclang -fobjc-weak
but like any -Xclang option, this option may be removed at any point,
e.g. if/when it is eventually enabled by default.
This patch also enables the use of the ARC __unsafe_unretained qualifier
in MRC. Unlike __weak, this is being enabled immediately. Since
variables are essentially __unsafe_unretained by default in MRC,
the only practical uses are (1) communication and (2) changing the
default behavior of by-value block capture.
As an implementation matter, this means that the ObjC ownership
qualifiers may appear in any ObjC language mode, and so this patch
removes a number of checks for getLangOpts().ObjCAutoRefCount
that were guarding the processing of these qualifiers. I don't
expect this to be a significant drain on performance; it may even
be faster to just check for these qualifiers directly on a type
(since it's probably in a register anyway) than to do N dependent
loads to grab the LangOptions.
rdar://9674298
llvm-svn: 251041
Summary: It breaks the build for the ASTMatchers
Subscribers: klimek, cfe-commits
Differential Revision: http://reviews.llvm.org/D13893
llvm-svn: 250827
Introduce an Address type to bundle a pointer value with an
alignment. Introduce APIs on CGBuilderTy to work with Address
values. Change core APIs on CGF/CGM to traffic in Address where
appropriate. Require alignments to be non-zero. Update a ton
of code to compute and propagate alignment information.
As part of this, I've promoted CGBuiltin's EmitPointerWithAlignment
helper function to CGF and made use of it in a number of places in
the expression emitter.
The end result is that we should now be significantly more correct
when performing operations on objects that are locally known to
be under-aligned. Since alignment is not reliably tracked in the
type system, there are inherent limits to this, but at least we
are no longer confused by standard operations like derived-to-base
conversions and array-to-pointer decay. I've also fixed a large
number of bugs where we were applying the complete-object alignment
to a pointer instead of the non-virtual alignment, although most of
these were hidden by the very conservative approach we took with
member alignment.
Also, because IRGen now reliably asserts on zero alignments, we
should no longer be subject to an absurd but frustrating recurring
bug where an incomplete type would report a zero alignment and then
we'd naively do a alignmentAtOffset on it and emit code using an
alignment equal to the largest power-of-two factor of the offset.
We should also now be emitting much more aggressive alignment
attributes in the presence of over-alignment. In particular,
field access now uses alignmentAtOffset instead of min.
Several times in this patch, I had to change the existing
code-generation pattern in order to more effectively use
the Address APIs. For the most part, this seems to be a strict
improvement, like doing pointer arithmetic with GEPs instead of
ptrtoint. That said, I've tried very hard to not change semantics,
but it is likely that I've failed in a few places, for which I
apologize.
ABIArgInfo now always carries the assumed alignment of indirect and
indirect byval arguments. In order to cut down on what was already
a dauntingly large patch, I changed the code to never set align
attributes in the IR on non-byval indirect arguments. That is,
we still generate code which assumes that indirect arguments have
the given alignment, but we don't express this information to the
backend except where it's semantically required (i.e. on byvals).
This is likely a minor regression for those targets that did provide
this information, but it'll be trivial to add it back in a later
patch.
I partially punted on applying this work to CGBuiltin. Please
do not add more uses of the CreateDefaultAligned{Load,Store}
APIs; they will be going away eventually.
llvm-svn: 246985
When messaging a method that was defined in an Objective-C class (or
category or extension thereof) that has type parameters, substitute
the type arguments for those type parameters. Similarly, substitute
into property accesses, instance variables, and other references.
This includes general infrastructure for substituting the type
arguments associated with an ObjCObject(Pointer)Type into a type
referenced within a particular context, handling all of the
substitutions required to deal with (e.g.) inheritance involving
parameterized classes. In cases where no type arguments are available
(e.g., because we're messaging via some unspecialized type, id, etc.),
we substitute in the type bounds for the type parameters instead.
Example:
@interface NSSet<T : id<NSCopying>> : NSObject <NSCopying>
- (T)firstObject;
@end
void f(NSSet<NSString *> *stringSet, NSSet *anySet) {
[stringSet firstObject]; // produces NSString*
[anySet firstObject]; // produces id<NSCopying> (the bound)
}
When substituting for the type parameters given an unspecialized
context (i.e., no specific type arguments were given), substituting
the type bounds unconditionally produces type signatures that are too
strong compared to the pre-generics signatures. Instead, use the
following rule:
- In covariant positions, such as method return types, replace type
parameters with “id” or “Class” (the latter only when the type
parameter bound is “Class” or qualified class, e.g,
“Class<NSCopying>”)
- In other positions (e.g., parameter types), replace type
parameters with their type bounds.
- When a specialized Objective-C object or object pointer type
contains a type parameter in its type arguments (e.g.,
NSArray<T>*, but not NSArray<NSString *> *), replace the entire
object/object pointer type with its unspecialized version (e.g.,
NSArray *).
llvm-svn: 241543
The patch is generated using this command:
$ tools/extra/clang-tidy/tool/run-clang-tidy.py -fix \
-checks=-*,llvm-namespace-comment -header-filter='llvm/.*|clang/.*' \
work/llvm/tools/clang
To reduce churn, not touching namespaces spanning less than 10 lines.
llvm-svn: 240270
The fact that PGO has a say in how these branch weights are determined
isn't interesting to most of CodeGen, so it makes more sense for this
API to be accessible via CodeGenFunction rather than CodeGenPGO.
llvm-svn: 236380
The RegionCounter type does a lot of legwork, but most of it is only
meaningful within the implementation of CodeGenPGO. The uses elsewhere
in CodeGen generally just want to increment or read counters, so do
that directly.
llvm-svn: 235664
Without setting the CurEHLocation these cleanups would be attributed to
whatever the last active debug line location was (the 'fn' call in the
included test cases). By setting CurEHLocation correctly the line
information is improved/corrected.
This quality bug turned into a crasher with r225000 when, instead of
allowing the last location to persist, it would be zero'd out. This
could lead to a function call (such as the dtor) being made without a
debug location - if that call was subsequently inlined (and the caller
and callee had debug info, just not the call instruction) the inliner
would violate important constraints about the debug location chains by
not updating the inlined instructions to chain up to the callee
locations.
So, by fixing this bug, I am addressing the assertion failures
introduced by r225000 and should be able to recommit that patch with
impunity...
llvm-svn: 225955
The logic for lowering profiling counters has been moved to an LLVM
pass. Emit the intrinsics rather than duplicating the whole pass in
clang.
llvm-svn: 223683
CodeGenFunction objects aren't really designed to be reused for more
than one function, and doing so can leak debug info location information
from one function into the prologue of the next.
Add an assertion in to catch reuses of CodeGenFunction, which
surprisingly only caught the ObjC atomic getter/setter cases. Fix those
and add a test to demonstrate the issue.
The test is a bit slim, because we're just testing for the absence of a
debug location on the prologue instructions, which by itself probably
wouldn't be the end of the world - but the particular debug location
that was ending up there was for the previous function's last
instruction. This produced debug info for another function within this
function, which is something I'm trying to remove all cases of as its a
substantial source of bugs, especially around inlining (see r219215).
llvm-svn: 219690
-- a constructor list initialization that unpacked an initializer list into
constructor arguments and
-- a list initialization that created as std::initializer_list and passed it
as the first argument to a constructor
in the AST. Use this flag while instantiating templates to provide the right
semantics for the resulting initialization.
llvm-svn: 213224
ensure that querying the first declaration for its most recent declaration
checks for redeclarations from the imported module.
This works as follows:
* The 'most recent' pointer on a canonical declaration grows a pointer to the
external AST source and a generation number (space- and time-optimized for
the case where there is no external source).
* Each time the 'most recent' pointer is queried, if it has an external source,
we check whether it's up to date, and update it if not.
* The ancillary data stored on the canonical declaration is allocated lazily
to avoid filling it in for declarations that end up being non-canonical.
We'll still perform a redundant (ASTContext) allocation if someone asks for
the most recent declaration from a decl before setPreviousDecl is called,
but such cases are probably all bugs, and are now easy to find.
Some finessing is still in order here -- in particular, we use a very general
mechanism for handling the DefinitionData pointer on CXXRecordData, and a more
targeted approach would be more compact.
Also, the MayHaveOutOfDateDef mechanism should now be expunged, since it was
addressing only a corner of the full problem space here. That's not covered
by this patch.
Early performance benchmarks show that this makes no measurable difference to
Clang performance without modules enabled (and fixes a major correctness issue
with modules enabled). I'll revert if a full performance comparison shows any
problems.
llvm-svn: 209046
are not associated with any source lines.
Previously, if the Location of a Decl was empty, EmitFunctionStart would
just keep using CurLoc, which would sometimes be correct (e.g., thunks)
but in other cases would just point to a hilariously random location.
This patch fixes this by completely eliminating all uses of CurLoc from
EmitFunctionStart and rather have clients explicitly pass in a
SourceLocation for the function header and the function body.
rdar://problem/14985269
llvm-svn: 205999
Conceptually one of these loops is just a while-loop, but the actual code-gen
is more complicated. We don't instrument all the different control flow edges
to get accurate counts for each conditional branch, nor do I think it makes
sense to do so. Instead, make the simplifying assumption that the loop behaves
like a while-loop. Use the same branch weights for the first check for an
empty collection as would be used for the back-edge of a while loop, and use
that same weighting for the innermost loop, ignoring the possibility that there
may be some extra code to go fetch more elements.
llvm-svn: 204767
In instrumentation-based profiling, we need a set of data structures to
represent the counters. Previously, these were built up during static
initialization. Now, they're shoved into a specially-named section so
that they show up as an array.
As a consequence of the reorganizing symbols, instrumentation data
structures for linkonce functions are now correctly coalesced.
This is the first step in a larger project to minimize runtime overhead
and dependencies in instrumentation-based profilng. The larger picture
includes removing all initialization overhead and making the dependency
on libc optional.
<rdar://problem/15943240>
llvm-svn: 204080
We still don't use the PGO to set branch weights for these loops, but at
least this keeps the compiler from crashing. <rdar://problem/16137778>
llvm-svn: 202002
Previously, we made one traversal of the AST prior to codegen to assign
counters to the ASTs and then propagated the count values during codegen. This
patch now adds a separate AST traversal prior to codegen for the
-fprofile-instr-use option to propagate the count values. The counts are then
saved in a map from which they can be retrieved during codegen.
This new approach has several advantages:
1. It gets rid of a lot of extra PGO-related code that had previously been
added to codegen.
2. It fixes a serious bug. My original implementation (which was mailed to the
list but never committed) used 3 counters for every loop. Justin improved it to
move 2 of those counters into the less-frequently executed breaks and continues,
but that turned out to produce wrong count values in some cases. The solution
requires visiting a loop body before the condition so that the count for the
condition properly includes the break and continue counts. Changing codegen to
visit a loop body first would be a fairly invasive change, but with a separate
AST traversal, it is easy to control the order of traversal. I've added a
testcase (provided by Justin) to make sure this works correctly.
3. It improves the instrumentation overhead, reducing the number of counters for
a loop from 3 to 1. We no longer need dedicated counters for breaks and
continues, since we can just use the propagated count values when visiting
breaks and continues.
To make this work, I needed to make a change to the way we count case
statements, going back to my original approach of not including the fall-through
in the counter values. This was necessary because there isn't always an AST node
that can be used to record the fall-through count. Now case statements are
handled the same as default statements, with the fall-through paths branching
over the counter increments. While I was at it, I also went back to using this
approach for do-loops -- omitting the fall-through count into the loop body
simplifies some of the calculations and make them behave the same as other
loops. Whenever we start using this instrumentation for coverage, we'll need
to add the fall-through counts into the counter values.
llvm-svn: 201528
This fixes PR15768, where the sret parameter and the 'this' parameter
are in the wrong order.
Instance methods compiled by MSVC never return records in registers,
they always return indirectly through an sret pointer. That sret
pointer always comes after the 'this' parameter, for both __cdecl and
__thiscall methods.
Unfortunately, the same is true for other calling conventions, so we'll
have to change the overall approach here relatively soon.
Reviewers: rsmith
Differential Revision: http://llvm-reviews.chandlerc.com/D2664
llvm-svn: 200587
A return type is the declared or deduced part of the function type specified in
the declaration.
A result type is the (potentially adjusted) type of the value of an expression
that calls the function.
Rule of thumb:
* Declarations have return types and parameters.
* Expressions have result types and arguments.
llvm-svn: 200082
Debug info: Implement a cleaner version of r198461. For symmetry with
C and C++ don't emit an extra lexical scope for the compound statement
that is the body of an Objective-C method.
llvm-svn: 198715
C and C++ don't emit an extra lexical scope for the compound statement
that is the body of an Objective-C method.
rdar://problem/15010825
llvm-svn: 198699
encodes the canonical rules for LLVM's style. I noticed this had drifted
quite a bit when cleaning up LLVM, so wanted to clean up Clang as well.
llvm-svn: 198686
CodeGenABITypes is a wrapper built on top of CodeGenModule that exposes
some of the functionality of CodeGenTypes (held by CodeGenModule),
specifically methods that determine the LLVM types appropriate for
function argument and return values.
I addition to CodeGenABITypes.h, CGFunctionInfo.h is introduced, and the
definitions of ABIArgInfo, RequiredArgs, and CGFunctionInfo are moved
into this new header from the private headers ABIInfo.h and CGCall.h.
Exposing this functionality is one part of making it possible for LLDB
to determine the actual ABI locations of function arguments and return
values, making it possible for it to determine this for any supported
target without hard-coding ABI knowledge in the LLDB code.
llvm-svn: 193717
CodeGenFunction is run on only one function - a new object is made for
each new function. I would add an assertion/flag to this effect, but
there's an exception: ObjC properties involve emitting helper functions
that are all emitted by the same CodeGenFunction object, so such a check
is not possible/correct.
llvm-svn: 189277
a lambda.
Bug #1 is that CGF's CurFuncDecl was "stuck" at lambda invocation
functions. Fix that by generally improving getNonClosureContext
to look through lambdas and captured statements but only report
code contexts, which is generally what's wanted. Audit uses of
CurFuncDecl and getNonClosureAncestor for correctness.
Bug #2 is that lambdas weren't specially mapping 'self' when inside
an ObjC method. Fix that by removing the requirement for that
and using the normal EmitDeclRefLValue path in LoadObjCSelf.
rdar://13800041
llvm-svn: 181000
Model it as throwing so that the exception can be caught.
This is generally not expected to have significant code-size
impact because the contents of the @autoreleasepool block
are very likely to contain a call, very likely at the same
cleanup level as the @autoreleasepool itself.
rdar://13660038
llvm-svn: 179630
http://lab.llvm.org:8011/builders/clang-x86_64-darwin10-gdb went back green
before it processed the reverted 178663, so it could not have been the culprit.
Revert "Revert 178663."
This reverts commit 4f8a3eb2ce5d4ba422483439e20c8cbb4d953a41.
llvm-svn: 178682
For variables and functions clang used to store two storage classes. The one
"as written" in the code and a patched one, which, for example, propagates
static to the following decls.
This apparently is from the days clang lacked linkage computation. It is now
redundant and this patch removes it.
llvm-svn: 178663
to an out-parameter using the indirect-writeback conversion,
and we copied the current value of the variable to the temporary,
make sure that we register an intrinsic use of that value with
the optimizer so that the value won't get released until we have
a chance to retain it.
rdar://13195034
llvm-svn: 177813
aggregate types in a profoundly wrong way that has to be
worked around in every call site, to getEvaluationKind,
which classifies and distinguishes between all of these
cases.
Also, normalize the API for loading and storing complexes.
I'm working on a larger patch and wanted to pull these
changes out, but it would have be annoying to detangle
them from each other.
llvm-svn: 176656
calls and declarations.
LLVM has a default CC determined by the target triple. This is
not always the actual default CC for the ABI we've been asked to
target, and so we sometimes find ourselves annotating all user
functions with an explicit calling convention. Since these
calling conventions usually agree for the simple set of argument
types passed to most runtime functions, using the LLVM-default CC
in principle has no effect. However, the LLVM optimizer goes
into histrionics if it sees this kind of formal CC mismatch,
since it has no concept of CC compatibility. Therefore, if this
module happens to define the "runtime" function, or got LTO'ed
with such a definition, we can miscompile; so it's quite
important to get this right.
Defining runtime functions locally is quite common in embedded
applications.
llvm-svn: 176286
call sites as tail calls unconditionally. While it's theoretically true that
this is just an optimization, it's an optimization that we very much want to
happen even at -O0, or else ARC applications become substantially harder to
debug. See r169796 for the llvm/fast-isel side of things.
rdar://12553082
llvm-svn: 169996
combination of a load+objc_release; this is generally better
for tools that try to track why values are retained and
released. Also use objc_storeStrong when copying a block
(again, only at -O0), which requires us to do a preliminary
store of null in order to compensate for objc_storeStrong's
assign semantics.
llvm-svn: 166085
if (CGM.getModuleDebugInfo())
DebugInfo = CGM.getModuleDebugInfo()
into a call:
maybeInitializeDebugInfo();
This is a simplification for a possible future fix of PR13942.
llvm-svn: 166019
Clang will now honor the FP_CONTRACT pragma and emit LLVM
fmuladd intrinsics for expressions of the form A * B + C (when they occur in a
single statement).
llvm-svn: 164989
Serge Pavlov