This is a temporary hack to support adding checks for the "registers:"
block of mir functions. This is necessary to convert a number of tests
so that there's less churn when we change the MIR printer to put the
vreg classes on defs instead of in their own block.
llvm-svn: 316134
An empty livein block doesn't make much sense (why not just omit it?)
but they're legal and some tests have them, so its best to handle it.
llvm-svn: 316089
Matching prefixes isn't good enough, because it leads to things like
calling the first constant C3 just because there were two copies
before it. Tighten up the check to match more precisely, but also be
careful about ambiguity when dealing with target opcodes that end in a
number.
llvm-svn: 316088
This adds update_mir_test_checks, which updates the check lines in mir
tests. This can only update tests that start and end with .mir
currently (ie, -run-pass) but it should be sufficient for updating at
least some of the GlobalISel tests.
llvm-svn: 316057
The new scheme should match the normalization of embedded paths in
linkrepro tar files.
Differential Revision: https://reviews.llvm.org/D39023
llvm-svn: 316044
MSVC doesn't seem to like implicitly instantiating addPredicate and then
explicitly specializing it later. It causes an internal compiler error.
llvm-svn: 315930
Summary:
iPTR is a pointer of subtarget-specific size to any address space. Therefore
type checks on this size derive the SizeInBits from a subtarget hook.
At this point, we can import the simplests G_LOAD rules and select load
instructions using them. Further patches will support for the predicates to
enable additional loads as well as the stores.
The previous commit failed on MSVC due to a failure to convert an
initializer_list to a std::vector. Hopefully, MSVC will accept this version.
Depends on D37457
Reviewers: ab, qcolombet, t.p.northover, rovka, aditya_nandakumar
Reviewed By: qcolombet
Subscribers: kristof.beyls, javed.absar, llvm-commits, igorb
Differential Revision: https://reviews.llvm.org/D37458
llvm-svn: 315887
Summary:
iPTR is a pointer of subtarget-specific size to any address space. Therefore
type checks on this size derive the SizeInBits from a subtarget hook.
At this point, we can import the simplests G_LOAD rules and select load
instructions using them. Further patches will support for the predicates to
enable additional loads as well as the stores.
Depends on D37457
Reviewers: ab, qcolombet, t.p.northover, rovka, aditya_nandakumar
Reviewed By: qcolombet
Subscribers: kristof.beyls, javed.absar, llvm-commits, igorb
Differential Revision: https://reviews.llvm.org/D37458
llvm-svn: 315885
Summary:
This includes some context-sensitivity in the MVT to LLT conversion so that
pointer types are tested correctly.
FIXME: I'm not happy with the way this is done since everything is a
special-case. I've yet to find a reasonable way to implement it.
select-load.mir fails because <1 x s64> loads in tablegen get priority over s64
loads. This is fixed in the next patch and as such they should be committed
together, I've posted them separately to help with the review.
Depends on D37456
Reviewers: ab, qcolombet, t.p.northover, rovka, aditya_nandakumar
Subscribers: kristof.beyls, javed.absar, llvm-commits, igorb
Differential Revision: https://reviews.llvm.org/D37457
llvm-svn: 315884
Summary:
It's possible for a ComplexPattern to be used as an operator in a match
pattern. This is used by the load/store patterns in AArch64 to name the
suboperands returned by ComplexPattern predicate so that they can be broken
apart and referenced independently in the result pattern.
This patch adds support for this in order to enable the import of load/store
patterns.
Depends on D37445
Hopefully fixed the ambiguous constructor that a large number of bots reported.
Reviewers: ab, qcolombet, t.p.northover, rovka, aditya_nandakumar
Reviewed By: qcolombet
Subscribers: aemerson, javed.absar, igorb, llvm-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D37456
llvm-svn: 315869
Summary:
It's possible for a ComplexPattern to be used as an operator in a match
pattern. This is used by the load/store patterns in AArch64 to name the
suboperands returned by ComplexPattern predicate so that they can be broken
apart and referenced independently in the result pattern.
This patch adds support for this in order to enable the import of load/store
patterns.
Depends on D37445
Reviewers: ab, qcolombet, t.p.northover, rovka, aditya_nandakumar
Reviewed By: qcolombet
Subscribers: aemerson, javed.absar, igorb, llvm-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D37456
llvm-svn: 315863
In type inference, an empty type set for a specific hw mode is not an
error. In earlier stages of the design it was, but having to use non-
parameterized types with target intrinsics necessarily led to type
contradictions: since the intrinsics used specific types, they were
only valid for a specific hw mode, and the resulting type set for other
modes ended up empty. To accommodate the existence of such intrinsics
individual type sets were allowed to be empty as long as not all sets
were empty.
llvm-svn: 315858
Summary:
There is an important mismatch between ISD::LOAD and G_LOAD (and likewise for
ISD::STORE and G_STORE). In SelectionDAG, ISD::LOAD is a non-atomic load
and atomic loads are handled by a separate node. However, this is not true of
GlobalISel's G_LOAD. For G_LOAD, the MachineMemOperand indicates the atomicity
of the operation. As a result, this mapping must also add a predicate that
checks for non-atomic MachineMemOperands.
This is NFC since these nodes always have predicates in practice and are
therefore always rejected at the moment.
Depends on D37443
Reviewers: ab, qcolombet, t.p.northover, rovka, aditya_nandakumar
Reviewed By: qcolombet
Subscribers: kristof.beyls, llvm-commits, igorb
Differential Revision: https://reviews.llvm.org/D37445
llvm-svn: 315843
Summary:
GlobalISel and SelectionDAG require different code for the common
load/store predicates due to differences in the representation.
For example:
SelectionDAG: (load<signext,i8>:i32 GPR32:$addr) // The <> denote properties of the SDNode that are not printed in the DAG
GlobalISel: (G_SEXT:s32 (G_LOAD:s8 GPR32:$addr))
Even without that, differences in the IR (SDNode vs MachineInstr) require
differences in the C++ predicate.
This patch moves the implementation of the common load/store predicates
into tablegen so that it can handle these differences.
It's NFC for SelectionDAG since it emits equivalent code and it's NFC for
GlobalISel since the rules involving the relevant predicates are still
rejected by the importer.
Depends on D36618
Reviewers: ab, qcolombet, t.p.northover, rovka, aditya_nandakumar
Subscribers: llvm-commits, igorb
Differential Revision: https://reviews.llvm.org/D37443
Includes a partial revert of r315826 since this patch makes it necessary for
getPredCode() to return a std::string and getImmCode() should have the same
interface as getPredCode().
llvm-svn: 315841
"No such file or directory: C:\\...\\tests\\Output\\shared-output.py.tmp/Output/Shared/SHARED.tmp"
And yet other forward-slashes don't seem to be causing the same
problem. I'll see if I can get ahold of a Windows machine to poke at
this directly later.
llvm-svn: 315792
Summary:
Operand variable lookups are now performed by the RuleMatcher rather than
searching the whole matcher hierarchy for a match. This revealed a wrong-code
bug that currently affects ARM and X86 where patterns that use a variable more
than once in the match pattern will be imported but won't check that the
operands are identical. This can cause the tablegen-erated matcher to
accept matches that should be rejected.
Depends on D36569
Reviewers: ab, t.p.northover, qcolombet, rovka, aditya_nandakumar
Subscribers: aemerson, igorb, llvm-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D36618
llvm-svn: 315780
Summary:
There's only a tablegen testcase for IntImmLeaf and not a CodeGen one
because the relevant rules are rejected for other reasons at the moment.
On AArch64, it's because there's an SDNodeXForm attached to the operand.
On X86, it's because the rule either emits multiple instructions or has
another predicate using PatFrag which cannot easily be supported at the
same time.
Reviewers: ab, t.p.northover, qcolombet, rovka, aditya_nandakumar
Reviewed By: qcolombet
Subscribers: aemerson, javed.absar, igorb, llvm-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D36569
llvm-svn: 315761
Summary:
The purpose of this patch is to expose more information about ImmLeaf-like
PatLeaf's so that GlobalISel can learn to import them. Previously, ImmLeaf
could only be used to test int64_t's produced by sign-extending an APInt.
Other tests on immediates had to use the generic PatLeaf and extract the
constant using C++.
With this patch, tablegen will know how to generate predicates for APInt,
and APFloat. This will allow it to 'do the right thing' for both SelectionDAG
and GlobalISel which require different methods of extracting the immediate
from the IR.
This is NFC for SelectionDAG since the new code is equivalent to the
previous code. It's also NFC for FastISel because FastIselShouldIgnore is 1
for the ImmLeaf subclasses. Enabling FastIselShouldIgnore == 0 for these new
subclasses will require a significant re-factor of FastISel.
For GlobalISel, it's currently NFC because the relevant code to import the
affected rules is not yet present. This will be added in a later patch.
Depends on D36086
Reviewers: ab, t.p.northover, qcolombet, rovka, aditya_nandakumar
Reviewed By: qcolombet
Subscribers: bjope, aemerson, rengolin, javed.absar, igorb, llvm-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D36534
llvm-svn: 315747
I'm about to commit a patch that makes them necessary for getPredCode() and
it would be strange for getPredCode() and getImmCode() to require different
usage.
llvm-svn: 315733
This refers to a temporary path that can be shared across all tests,
identified by a particular label. This can be used for things like
caches.
At the moment, the character set for the LABEL is limited to C
identifier characters, plus '-', '+', '=', and '.'. This is the same
set of characters currently allowed in REQUIRES clause identifiers.
llvm-svn: 315697
This paves the way for other projects which might /use/ clang or
lld but not necessarily need to the full set of functionality
available to clang and lld tests to be able to have a basic set
of substitutions that allow a project to run the clang or lld
executables.
llvm-svn: 315627
Summary:
Add LLVM_FORCE_ENABLE_DUMP cmake option, and use it along with
LLVM_ENABLE_ASSERTIONS to set LLVM_ENABLE_DUMP.
Remove NDEBUG and only use LLVM_ENABLE_DUMP to enable dump methods.
Move definition of LLVM_ENABLE_DUMP from config.h to llvm-config.h so
it'll be picked up by public headers.
Differential Revision: https://reviews.llvm.org/D38406
llvm-svn: 315590
This reverts commit 4e4ee1c507e2707bb3c208e1e1b6551c3015cbf5.
This is failing due to some code that isn't built on MSVC
so I didn't catch. Not immediately obvious how to fix this
at first glance, so I'm reverting for now.
llvm-svn: 315536
There's a lot of misuse of Twine scattered around LLVM. This
ranges in severity from benign (returning a Twine from a function
by value that is just a string literal) to pretty sketchy (storing
a Twine by value in a class). While there are some uses for
copying Twines, most of the very compelling ones are confined
to the Twine class implementation itself, and other uses are
either dubious or easily worked around.
This patch makes Twine's copy constructor private, and fixes up
all callsites.
Differential Revision: https://reviews.llvm.org/D38767
llvm-svn: 315530
This adds debug tracing to the table-generated assembly instruction matcher,
enabled by the -debug-only=asm-matcher option.
The changes in the target AsmParsers are to add an MCInstrInfo reference under
a consistent name, so that we can use it from table-generated code. This was
already being used this way for targets that use deprecation warnings, but 5
targets did not have it, and Hexagon had it under a different name to the other
backends.
llvm-svn: 315445
This allows a DiagnosticType and/or DiagnosticString to be associated
with a RegisterClass in tablegen, so that we can emit diagnostics in the
assembler when a register operand is incorrect.
DiagnosticType creates a predictable enum value, which gets returned as
the error code when an operand does not match, and can be used by the
assembly parser to map to a user-facing diagnostic. DiagnosticString
creates an anonymous enum value (currently based on the tablegen class
name), and a function to map from enum values to strings will be
generated. Both of these work the same was as they do for AsmOperand.
This isn't used by any targets yet, but has one (positive) side-effect.
It improves the diagnostic codes returned by validateOperandClass - we
always want to emit the diagnostic that relates to the expected operand
class, but this wasn't always being done when the expected and actual
classes were completely different (token/register/custom). This causes a
few AArch64 diagnostics to be improved, as Match_InvalidOperand was
being returned instead of a specific diagnostic type.
Differential revision: https://reviews.llvm.org/D36691
llvm-svn: 315295
It's rare but there are a small number of patterns like this:
(set i64:$dst, (add i64:$src1, i64:$src2))
These should be equivalent to register classes except they shouldn't check for
a specific register bank.
This doesn't occur in AArch64/ARM/X86 but does occasionally come up in other
in-tree targets such as BPF.
llvm-svn: 315226
Justin Bogner