Currently if you use -{start,stop}-{before,after}, it picks
the first instance with the matching pass name. If you run
the same pass multiple times, there's no way to distinguish them.
Allow specifying a run index wih ,N to specify which you mean.
llvm-svn: 348285
D47882, D48130 and D48131 introduce a new lowering strategy for part-word
atomicrmw/cmpxchg and uses it to lower these operations for the RISC-V target.
Rather than having AtomicExpandPass produce the LL/SC loop in the IR level, it
instead calculates the necessary mask values and inserts a target-specific
intrinsic, which is lowered at a much later stage (after register allocation).
This ensures that architecture-specific restrictions for forward-progress in
LL/SC loops can be guaranteed.
This patch documents this new AtomicExpandPass functionality. See the previous
llvm-dev RFC for more info
<http://lists.llvm.org/pipermail/llvm-dev/2018-June/123993.html>.
Differential Revision: https://reviews.llvm.org/D52234
llvm-svn: 347971
Summary:
Resubmit this with no changes because I think the build was broken
by a different diff.
-----
The prior diff had to be reverted because there were two tests
that failed. I updated the two tests in this diff
clang/test/Misc/pragma-attribute-supported-attributes-list.test
clang/test/SemaCXX/attr-speculative-load-hardening.cpp
----- Summary from Previous Diff (Still Accurate) -----
LLVM IR already has an attribute for speculative_load_hardening. Before
this commit, when a user passed the -mspeculative-load-hardening flag to
Clang, every function would have this attribute added to it. This Clang
attribute will allow users to opt into SLH on a function by function basis.
This can be applied to functions and Objective C methods.
Reviewers: chandlerc, echristo, kristof.beyls, aaron.ballman
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D54915
llvm-svn: 347701
until I figure out why the build is failing or timing out
***************************
Summary:
The prior diff had to be reverted because there were two tests
that failed. I updated the two tests in this diff
clang/test/Misc/pragma-attribute-supported-attributes-list.test
clang/test/SemaCXX/attr-speculative-load-hardening.cpp
LLVM IR already has an attribute for speculative_load_hardening. Before
this commit, when a user passed the -mspeculative-load-hardening flag to
Clang, every function would have this attribute added to it. This Clang
attribute will allow users to opt into SLH on a function by function
basis.
This can be applied to functions and Objective C methods.
Reviewers: chandlerc, echristo, kristof.beyls, aaron.ballman
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D54915
This reverts commit a5b3c232d1e3613f23efbc3960f8e23ea70f2a79.
(r347617)
llvm-svn: 347628
Summary:
The prior diff had to be reverted because there were two tests
that failed. I updated the two tests in this diff
clang/test/Misc/pragma-attribute-supported-attributes-list.test
clang/test/SemaCXX/attr-speculative-load-hardening.cpp
----- Summary from Previous Diff (Still Accurate) -----
LLVM IR already has an attribute for speculative_load_hardening. Before
this commit, when a user passed the -mspeculative-load-hardening flag to
Clang, every function would have this attribute added to it. This Clang
attribute will allow users to opt into SLH on a function by function basis.
This can be applied to functions and Objective C methods.
Reviewers: chandlerc, echristo, kristof.beyls, aaron.ballman
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D54915
llvm-svn: 347617
Summary:
Basic documentation of the Stack Safety Analysis.
It will be improved during review and upstream of an implementation.
Reviewers: kcc, eugenis, vlad.tsyrklevich, glider
Reviewed By: vlad.tsyrklevich
Subscribers: arphaman, llvm-commits
Differential Revision: https://reviews.llvm.org/D53336
llvm-svn: 347612
Summary:
LLVM IR already has an attribute for speculative_load_hardening. Before
this commit, when a user passed the -mspeculative-load-hardening flag to
Clang, every function would have this attribute added to it. This Clang
attribute will allow users to opt into SLH on a function by function basis.
This can be applied to functions and Objective C methods.
Reviewers: chandlerc, echristo
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D54555
llvm-svn: 347586
RetireControlUnitStatistics now reports extra information about the ROB and the
avg/maximum number of entries consumed over the entire simulation.
Example:
Retire Control Unit - number of cycles where we saw N instructions retired:
[# retired], [# cycles]
0, 109 (17.9%)
1, 102 (16.7%)
2, 399 (65.4%)
Total ROB Entries: 64
Max Used ROB Entries: 35 ( 54.7% )
Average Used ROB Entries per cy: 32 ( 50.0% )
Documentation in llvm/docs/CommandGuide/llvmn-mca.rst has been updated to
reflect this change.
llvm-svn: 347493
* Add amdhsa prefix to names to allow other tools to use the metadata
without collision.
* Make names consistent.
* Simplify structure.
* Change note record ID.
* Switch from YAML to MsgPack format.
* Document metadata assembler directive.
Patch By: t-tye (Tony Tye)
Differential Revision: https://reviews.llvm.org/D53445
llvm-svn: 346992
A call to @llvm.trap can be expected to be cold (i.e. unlikely to be
reached in a normal program execution).
Outlining paths which unconditionally trap is an important memory
saving. As the hot/cold splitting pass (imho) should not treat all
noreturn calls as cold, explicitly mark @llvm.trap cold so that it can
be outlined.
Split out of https://reviews.llvm.org/D54244.
Differential Revision: https://reviews.llvm.org/D54329
llvm-svn: 346885
In some cases it is desirable to match the same pattern repeatedly
many times. Currently the only way to do it is to copy the same
check pattern as many times as needed. And that gets pretty unwieldy
when its more than count is big.
Introducing CHECK-COUNT-<num> directive which acts like a plain CHECK
directive yet matches the same pattern exactly <num> times.
Extended FileCheckType to a struct to add Count there.
Changed some parsing routines to handle non-fixed length of directive
(all currently existing directives were fixed-length).
The code is generic enough to allow future support for COUNT in more
than just PlainCheck directives.
See motivating example for this feature in reviews.llvm.org/D54223.
Reviewed By: chandlerc, dblaikie
Differential Revision: https://reviews.llvm.org/D54336
llvm-svn: 346722
Summary:
lcov tracefiles are used by various coverage reporting tools and build
systems (e.g., Bazel). It is a simple text-based format to parse and
more convenient to use than the JSON export format, which needs
additional processing to map regions/segments back to line numbers.
It's a little unfortunate that "text" format is now overloaded to refer
specifically to JSON for export, but I wanted to avoid making any
breaking changes to the UI of the llvm-cov tool at this time.
Patch by Tony Allevato (@allevato).
Reviewers: Dor1s, vsk
Reviewed By: Dor1s, vsk
Subscribers: mgorny, llvm-commits
Differential Revision: https://reviews.llvm.org/D54266
llvm-svn: 346506
This adds the llvm-side support for post-inlining evaluation of the
__builtin_constant_p GCC intrinsic.
Also fixed SCCPSolver::visitCallSite to not blow up when seeing a call
to a function where canConstantFoldTo returns true, and one of the
arguments is a struct.
Updated from patch initially by Janusz Sobczak.
Differential Revision: https://reviews.llvm.org/D4276
llvm-svn: 346322
Document what is expected during:
* triaging
* actively working on a bug
* closing/resolving
Also document how we maintain:
* product/component breakdown
* default-cc lists per component
Differential Revision: https://reviews.llvm.org/D53691
llvm-svn: 346299
This feature makes it easy to tune FileCheck diagnostic output when
running the test suite via ninja, a bot, or an IDE. For example:
```
$ FILECHECK_OPTS='-color -v -dump-input-on-failure' \
LIT_FILTER='OpenMP/for_codegen.cpp' ninja check-clang \
| less -R
```
Reviewed By: probinson
Differential Revision: https://reviews.llvm.org/D53517
llvm-svn: 346272
Depending on who you ask, PGO grants a 15%-25% improvement in build
times when using clang. Sadly, hooking everything up properly to
generate a profile and apply it to clang isn't always straightforward.
This script (and the accompanying docs) aim to make this process easier;
ideally, a single invocation of the given script.
In terms of testing, I've got a cronjob on my Debian box that's meant to
run this a few times per week, and I tried manually running it on a puny
Gentoo box I have (four whole Atom cores!). Nothing obviously broke.
¯\_(ツ)_/¯
I don't know if we have a Python style guide, so I just shoved this
through yapf with all the defaults on.
Finally, though the focus is clang at the moment, the hope is that this
is easily applicable to other LLVM-y tools with minimal effort (e.g.
lld, opt, ...). Hence, this lives in llvm/utils and tries to be somewhat
ambiguous about naming.
Differential Revision: https://reviews.llvm.org/D53598
llvm-svn: 345427
Summary:
The pfm counters are now in the ExegesisTarget rather than the
MCSchedModel (PR39165).
This also compresses the pfm counter tables (PR37068).
Reviewers: RKSimon, gchatelet
Subscribers: mgrang, llvm-commits
Differential Revision: https://reviews.llvm.org/D52932
llvm-svn: 345243
(Relands r344930, reverted in r344935, and now hopefully fixed for
Windows.)
While this change specifically targets FileCheck, it affects any tool
using the same SourceMgr facilities.
Previously, -color was documented in FileCheck's -help output, but
-color had no effect. Now, -color obeys its documentation: it forces
colors to be used in FileCheck diagnostics even when stderr is not a
terminal.
-color is especially helpful when combined with FileCheck's -v, which
can produce a long series of diagnostics that you might wish to pipe
to a pager, such as less -R. The WithColor extensions here will also
help to clean up color usage in FileCheck's annotated dump of input,
which is proposed in D52999.
Reviewed By: JDevlieghere, zturner
Differential Revision: https://reviews.llvm.org/D53419
llvm-svn: 345202
Add a list of benchmarks, applications and algorithms which are under
discussion to be added to the test-suite.
The initial list includes the the benchmarks mentioned at
https://llvm.org/PR34216, missing SPEC benchmarks, some image processing
algorithms and a few others. The bug tracker only allows adding to the
discussion, not removing, commenting, adding details to individual
benchmarks.
The first proposal was to add these benchmark into the test-suite
repository, but after a discussion, adding it to llvm/docs/Proposals
seem more appropriate. One advantage is that llvm.org will have a
browsable web page with these suggestions.
Suggested-by: Hal Finkel
Differential Revision: https://reviews.llvm.org/D46714
llvm-svn: 345074
While this change specifically targets FileCheck, it affects any tool
using the same SourceMgr facilities.
Previously, -color was documented in FileCheck's -help output, but
-color had no effect. Now, -color obeys its documentation: it forces
colors to be used in FileCheck diagnostics even when stderr is not a
terminal.
-color is especially helpful when combined with FileCheck's -v, which
can produce a long series of diagnostics that you might wish to pipe
to a pager, such as less -R. The WithColor extensions here will also
help to clean up color usage in FileCheck's annotated dump of input,
which is proposed in D52999.
Reviewed By: JDevlieghere
Differential Revision: https://reviews.llvm.org/D53419
llvm-svn: 344930
Allows to disable direct TLS segment access (%fs or %gs). GCC supports
a similar flag, it can be useful in some circumstances, e.g. when a thread
context block needs to be updated directly from user space. More info
and specific use cases: https://bugs.llvm.org/show_bug.cgi?id=16145
There is another revision for clang as well.
Related: D53102
All X86 CodeGen tests appear to pass:
```
[46/47] Running lit suite /SourceCache/llvm-trunk-8.0/test/CodeGen
Testing Time: 23.17s
Expected Passes : 3801
Expected Failures : 15
Unsupported Tests : 8021
```
Reviewed by: Craig Topper.
Patch by nruslan (Ruslan Nikolaev).
Differential Revision: https://reviews.llvm.org/D53103
llvm-svn: 344723
Returning the error to clients provides an opportunity to introduce readers to
the Expected and Error APIs and makes the tutorial more useful as a starting
point for a real JIT class, while only slightly complicating the code.
llvm-svn: 344720
Summary:
We try to recover gracefully on instructions that would crash the
program.
This includes some refactoring of runMeasurement() implementations.
Reviewers: gchatelet
Subscribers: tschuett, llvm-commits
Differential Revision: https://reviews.llvm.org/D53371
llvm-svn: 344695
Summary:
These new intrinsics have the semantics of the `minimum` and `maximum`
operations specified by the latest draft of IEEE 754-2018. Unlike
llvm.minnum and llvm.maxnum, these new intrinsics propagate NaNs and
always treat -0.0 as less than 0.0. `minimum` and `maximum` lower
directly to the existing `fminnan` and `fmaxnan` ISel DAG nodes. It is
safe to reuse these DAG nodes because before this patch were only
emitted in situations where there were known to be no NaN arguments or
where NaN propagation was correct and there were known to be no zero
arguments. I know of only four backends that lower fminnan and
fmaxnan: WebAssembly, ARM, AArch64, and SystemZ, and each of these
lowers fminnan and fmaxnan to instructions that are compatible with
the IEEE 754-2018 semantics.
Reviewers: aheejin, dschuff, sunfish, javed.absar
Subscribers: kristof.beyls, dexonsmith, kristina, llvm-commits
Differential Revision: https://reviews.llvm.org/D52764
llvm-svn: 344437
Summary:
This is a step towards fixing PR38048.
Note that right now the measurements are given per instruction. We'll
need to give measurements a per code snippet and update the analysis (PR38731).
Reviewers: gchatelet
Subscribers: tschuett, llvm-commits
Differential Revision: https://reviews.llvm.org/D52041
llvm-svn: 342947
In my original diff I missed #include "llvm/System/Thing.h" and forgot to update a
reference to .inc files a few lines down. This patch corrects these things as
they were missed in revision 342500.
llvm-svn: 342705
Summary:
Some lines have a hit counter where they should not have one.
For example, in C++, some cleanup is adding at the end of a scope represented by a '}'.
So such a line has a hit counter where a user expects to not have one.
The goal of the patch is to add this information in DILocation which is used to get the covered lines in GCOVProfiling.cpp.
A following patch in clang will add this information when generating IR (https://reviews.llvm.org/D49916).
Reviewers: marco-c, davidxl, vsk, javed.absar, rnk
Reviewed By: rnk
Subscribers: eraman, xur, danielcdh, aprantl, rnk, dblaikie, #debug-info, vsk, llvm-commits, sylvestre.ledru
Tags: #debug-info
Differential Revision: https://reviews.llvm.org/D49915
llvm-svn: 342631
System Library has been a long deprecated term along with the path lib/System, having been superseded/renamed
to the Support Library a long time ago. These patches reflect those changes in documentation as well as
update some outdated examples and provide context to the origin of the Support Library.
Differential Revision: https://reviews.llvm.org/D52107
llvm-svn: 342500
Summary:
Remove note about summary being ignored. Update to reflect the
fact that summary is now parsed by llvm-as.
While here, fix one summary format that changed since the initial
implementation.
Reviewers: dexonsmith
Subscribers: inglorion, llvm-commits
Differential Revision: https://reviews.llvm.org/D51540
llvm-svn: 342479
add a tool to generate symbol remapping files.
Summary:
The new tool llvm-cxxmap builds a symbol mapping table from a file containing
a description of partial equivalences to apply to mangled names and files
containing old and new symbol tables.
Reviewers: davidxl
Subscribers: mgorny, llvm-commits
Differential Revision: https://reviews.llvm.org/D51470
llvm-svn: 342168
The assertion in MCCodeView.cpp was resolved in r340878.
This reverts both r340905 and r340836, making benchmarks build by
default everywhere.
llvm-svn: 341716
Load Hardening.
Wires up the existing pass to work with a proper IR attribute rather
than just a hidden/internal flag. The internal flag continues to work
for now, but I'll likely remove it soon.
Most of the churn here is adding the IR attribute. I talked about this
Kristof Beyls and he seemed at least initially OK with this direction.
The idea of using a full attribute here is that we *do* expect at least
some forms of this for other architectures. There isn't anything
*inherently* x86-specific about this technique, just that we only have
an implementation for x86 at the moment.
While we could potentially expose this as a Clang-level attribute as
well, that seems like a good question to defer for the moment as it
isn't 100% clear whether that or some other programmer interface (or
both?) would be best. We'll defer the programmer interface side of this
for now, but at least get to the point where the feature can be enabled
without relying on implementation details.
This also allows us to do something that was really hard before: we can
enable *just* the indirect call retpolines when using SLH. For x86, we
don't have any other way to mitigate indirect calls. Other architectures
may take a different approach of course, and none of this is surfaced to
user-level flags.
Differential Revision: https://reviews.llvm.org/D51157
llvm-svn: 341363
implementing the proposed mitigation technique described in the original
design document.
The idea is to check after calls that the return address used to arrive
at that location is in fact the correct address. In the event of
a mis-predicted return which reaches a *valid* return but not the
*correct* return, this will detect the mismatch much like it would
a mispredicted conditional branch.
This is the last published attack vector that I am aware of in the
Spectre v1 space which is not mitigated by SLH+retpolines. However,
don't read *too* much into that: this is an area of ongoing research
where we expect more issues to be discovered in the future, and it also
makes no attempt to mitigate Spectre v4. Still, this is an important
completeness bar for SLH.
The change here is of course delightfully simple. It was predicated on
cutting support for post-instruction symbols into LLVM which was not at
all simple. Many thanks to Hal Finkel, Reid Kleckner, and Justin Bogner
who helped me figure out how to do a bunch of the complex changes
involved there.
Differential Revision: https://reviews.llvm.org/D50837
llvm-svn: 341358
- Remove duplication: Both TestingGuide and TestSuiteMakefileGuide
would give a similar overview over the test-suite.
- Present cmake/lit as the default/normal way of running the test-suite:
- Move information about the cmake/lit testsuite into the new
TestSuiteGuide.rst file. Mark the remaining information in
TestSuiteMakefilesGuide.rst as deprecated.
- General simplification and shorting of language.
- Remove paragraphs about tests known to fail as everything should pass
nowadays.
- Remove paragraph about zlib requirement; it's not required anymore
since we copied a zlib source snapshot into the test-suite.
- Remove paragraph about comparison with "native compiler". Correctness is
always checked against reference outputs nowadays.
- Change cmake/lit quickstart section to recommend `pip` for installing
lit and use `CMAKE_C_COMPILER` and a cache file in the example as that
is what most people will end up doing anyway. Also a section about
compare.py to quickstart.
- Document `Bitcode` and `MicroBenchmarks` directories.
- Add section with commonly used cmake configuration options.
- Add section about showing and comparing result files via compare.py.
- Add section about using external benchmark suites.
- Add section about using custom benchmark suites.
- Add section about profile guided optimization.
- Add section about cross-compilation and running on external devices.
Differential Revision: https://reviews.llvm.org/D51465
llvm-svn: 341260
This patch introduces the following changes to the DispatchStatistics view:
* DispatchStatistics now reports the number of dispatched opcodes instead of
the number of dispatched instructions.
* The "Dynamic Dispatch Stall Cycles" table now also reports the percentage of
stall cycles against the total simulated cycles.
This change allows users to easily compare dispatch group sizes with the
processor DispatchWidth.
Before this change, it was difficult to correlate the two numbers, since
DispatchStatistics view reported numbers of instructions (instead of opcodes).
DispatchWidth defines the maximum size of a dispatch group in terms of number of
micro opcodes.
The other change introduced by this patch is related to how DispatchStage
generates "instruction dispatch" events.
In particular:
* There can be multiple dispatch events associated with a same instruction
* Each dispatch event now encapsulates the number of dispatched micro opcodes.
The number of micro opcodes declared by an instruction may exceed the processor
DispatchWidth. Therefore, we cannot assume that instructions are always fully
dispatched in a single cycle.
DispatchStage knows already how to handle instructions declaring a number of
opcodes bigger that DispatchWidth. However, DispatchStage always emitted a
single instruction dispatch event (during the first simulated dispatch cycle)
for instructions dispatched.
With this patch, DispatchStage now correctly notifies multiple dispatch events
for instructions that cannot be dispatched in a single cycle.
A few views had to be modified. Views can no longer assume that there can only
be one dispatch event per instruction.
Tests (and docs) have been updated.
Differential Revision: https://reviews.llvm.org/D51430
llvm-svn: 341055
This patch adds two new fields to the perf report generated by the SummaryView.
Fields are now logically organized into two small groups; only the second group
contains throughput indicators.
Example:
```
Iterations: 100
Instructions: 300
Total Cycles: 414
Total uOps: 700
Dispatch Width: 4
uOps Per Cycle: 1.69
IPC: 0.72
Block RThroughput: 4.0
```
This patch also updates the docs for llvm-mca.
Due to the nature of this change, several tests in the tools/llvm-mca directory
were affected, and had to be updated using script `update_mca_test_checks.py`.
llvm-svn: 340946
The problems with benchmark build should be fixed now, but Windows
buildbots still run into errors seemingly because of the bug in
clang-cl. Because of that, benchmark shouldn't be built on Windows at
this point.
llvm-svn: 340905
This patch pulls google/benchmark v1.4.1 into the LLVM tree so that any
project could use it for benchmark generation. A dummy benchmark is
added to `llvm/benchmarks/DummyYAML.cpp` to validate the correctness of
the build process.
The current version does not utilize LLVM LNT and LLVM CMake
infrastructure, but that might be sufficient for most users. Two
introduced CMake variables:
* `LLVM_INCLUDE_BENCHMARKS` (`ON` by default) generates benchmark
targets
* `LLVM_BUILD_BENCHMARKS` (`OFF` by default) adds generated
benchmark targets to the list of default LLVM targets (i.e. if `ON`
benchmarks will be built upon standard build invocation, e.g. `ninja` or
`make` with no specific targets)
List of modifications:
* `BENCHMARK_ENABLE_TESTING` is disabled
* `BENCHMARK_ENABLE_EXCEPTIONS` is disabled
* `BENCHMARK_ENABLE_INSTALL` is disabled
* `BENCHMARK_ENABLE_GTEST_TESTS` is disabled
* `BENCHMARK_DOWNLOAD_DEPENDENCIES` is disabled
Original discussion can be found here:
http://lists.llvm.org/pipermail/llvm-dev/2018-August/125023.html
Reviewed by: dberris, lebedev.ri
Subscribers: ilya-biryukov, ioeric, EricWF, lebedev.ri, srhines,
dschuff, mgorny, krytarowski, fedor.sergeev, mgrang, jfb, llvm-commits
Differential Revision: https://reviews.llvm.org/D50894
llvm-svn: 340809
Before this patch, the SchedulerStatistics only printed the maximum number of
buffer entries consumed in each scheduler's queue at a given point of the
simulation.
This patch restructures the reported table, and adds an extra field named
"Average number of used buffer entries" to it.
This patch also uses different colors to help identifying bottlenecks caused by
high scheduler's buffer pressure.
llvm-svn: 340746
This is a bit awkward in a handful of places where we didn't even have
an instruction and now we have to see if we can build one. But on the
whole, this seems like a win and at worst a reasonable cost for removing
`TerminatorInst`.
All of this is part of the removal of `TerminatorInst` from the
`Instruction` type hierarchy.
llvm-svn: 340701
Most users won't have to worry about this as all of the
'getOrInsertFunction' functions on Module will default to the program
address space.
An overload has been added to Function::Create to abstract away the
details for most callers.
This is based on https://reviews.llvm.org/D37054 but without the changes to
make passing a Module to Function::Create() mandatory. I have also added
some more tests and fixed the LLParser to accept call instructions for
types in the program address space.
Reviewed By: bjope
Differential Revision: https://reviews.llvm.org/D47541
llvm-svn: 340519
This adds the plumbing for the Tiny code model for the AArch64 backend. This,
instead of loading addresses through the normal ADRP;ADD pair used in the Small
model, uses a single ADR. The 21 bit range of an ADR means that the code and
its statically defined symbols need to be within 1MB of each other.
This makes it mostly interesting for embedded applications where we want to fit
as much as we can in as small a space as possible.
Differential Revision: https://reviews.llvm.org/D49673
llvm-svn: 340397
well as MIR parsing support for `MCSymbol` `MachineOperand`s.
The only real way to test pre- and post-instruction symbol support is to
use them in operands, so I ended up implementing that within the patch
as well. I can split out the operand support if folks really want but it
doesn't really seem worth it.
The functional implementation of pre- and post-instruction symbols is
now *completely trivial*. Two tiny bits of code in the (misnamed)
AsmPrinter. It should be completely target independent as well. We emit
these exactly the same way as we emit basic block labels. Most of the
code here is to give full dumping, MIR printing, and MIR parsing support
so that we can write useful tests.
The MIR parsing of MC symbol operands still isn't 100%, as it forces the
symbols to be non-temporary and non-local symbols with names. However,
those names often can encode most (if not all) of the special semantics
desired, and unnamed symbols seem especially annoying to serialize and
de-serialize. While this isn't perfect or full support, it seems plenty
to write tests that exercise usage of these kinds of operands.
The MIR support for pre-and post-instruction symbols was quite
straightforward. I chose to print them out in an as-if-operand syntax
similar to debug locations as this seemed the cleanest way and let me
use nice introducer tokens rather than inventing more magic punctuation
like we use for memoperands.
However, supporting MIR-based parsing of these symbols caused me to
change the design of the symbol support to allow setting arbitrary
symbols. Without this, I don't see any reasonable way to test things
with MIR.
Differential Revision: https://reviews.llvm.org/D50833
llvm-svn: 339962
Clarify that you should not introduce trailing whitespace when making a commit and that you should not remove trailing whitespace that's unrelated to code you are changing or are about to change. Then clarified the developer policy around what is considered an obvious whitespace commit.
llvm-svn: 339455
Summary:
Add a CommandGuide for llvm-objdump summarizing its usage along with some
general context.
Reviewers: beanz
Reviewed By: beanz
Subscribers: Eugene.Zelenko, llvm-commits
Differential Revision: https://reviews.llvm.org/D50034
llvm-svn: 339250
The sphinx build bot is erroring on these examples for some unknown
reason, and really the dso_local doesn't seem to be relevant to the
example in any way so its cleaner to omit it. And now they will look
a bit more like other (successful) IR examples.
llvm-svn: 338998
highlighting syntax.
Most of them already were like this, and the Sphinx runs on the docs
build bot seems to be substantially more picky and/or not have support
for a bunch of the syntax here. Hopefully this will let it progress past
this.
My previous attempt to fix the syntax made the `opt` tool happy, but no
idea what the Sphinx stuff is really looking for, and the fact that
other blocks already just use `text` led me to this solution.
llvm-svn: 338983
Notably, just close two of the debug info metadata nodes early rather
than leaving them open with `...` which won't ever lex correctly. And
add the missing `:` on the count labels.
Slowly progressing through all of the warnings on the documentation
build bot. Sorry to do this one commit at a time, but despite my best
efforts I can't trigger these errors locally.
llvm-svn: 338982
Sphinx syntax highlighter.
This example also doesn't really make sense. There is no control flow or
clarification of what the `Safe:` block exists to do... If we want
examples here, we should make them much more clear in addition to making
them well formed IR sequences.
llvm-svn: 338981
This appears to produce a warning on the docs build bot. It doesn't
reproduce for me, likely because I have a newer (or more full featured)
pygments install.
llvm-svn: 338978
Sphinx.
We think the bot is updated now, so trying this again. I'm landing it
(with permission) as Michael is at a con at the moment.
Actual patch largely by Michael Spencer.
Differential Revision: https://reviews.llvm.org/D44910
llvm-svn: 338977
This patch is a follow-up to r338702.
We don't need to use a map to model the wait/ready/issued sets. It is much more
efficient to use a vector instead.
This patch gives us an average 7.5% speedup (on top of the ~12% speedup obtained
after r338702).
llvm-svn: 338883
This patch replaces all the remaining occurrences of string "MCA" with
":program:`llvm-mca`". Somehow I missed those strings when I committed r338394.
This patch also improves section "Instruction Dispatch".
llvm-svn: 338881
Summary:
This patch mostly copies the existing Instruction Flow, and stage descriptions
from the mca README. I made a few text tweaks, but no semantic changes,
and made reference to the "default pipeline." I also removed the internals
references (e.g., reference to class names and header files). I did leave the
LSUnit name around, but only as an abbreviated word for the load-store unit.
Reviewers: andreadb, courbet, RKSimon, gbedwell, filcab
Reviewed By: andreadb
Subscribers: tschuett, jfb, llvm-commits
Differential Revision: https://reviews.llvm.org/D49692
llvm-svn: 338319
This makes it easier for someone to copy-paste this line, change the path, and run the command.
Differential Revision: https://reviews.llvm.org/D49201
llvm-svn: 338254
This should make the semantics of DIExpressions within llvm.dbg.{addr,
declare, value} easier to understand.
Differential Revision: https://reviews.llvm.org/D49572
llvm-svn: 338182
In light of the recent changes to SmallVector in r335421, r337514, and
r337820, document its advantages over std::vector (see r175906 and
r266909).
Also add a release note.
https://reviews.llvm.org/D49748
llvm-svn: 338071
Violating the invariants specified by attributes is undefined behavior.
Maybe we could use poison instead for some of the parameter attributes,
but I don't think it's worthwhile.
Differential Revision: https://reviews.llvm.org/D49041
llvm-svn: 337947
This new JIT event listener supports generating profiling data for
the linux 'perf' profiling tool, allowing it to generate function and
instruction level profiles.
Currently this functionality is not enabled by default, but must be
enabled with LLVM_USE_PERF=yes. Given that the listener has no
dependencies, it might be sensible to enable by default once the
initial issues have been shaken out.
I followed existing precedent in registering the listener by default
in lli. Should there be a decision to enable this by default on linux,
that should probably be changed.
Please note that until https://reviews.llvm.org/D47343 is resolved,
using this functionality with mcjit rather than orcjit will not
reliably work.
Disregarding the previous comment, here's an example:
$ cat /tmp/expensive_loop.c
bool stupid_isprime(uint64_t num)
{
if (num == 2)
return true;
if (num < 1 || num % 2 == 0)
return false;
for(uint64_t i = 3; i < num / 2; i+= 2) {
if (num % i == 0)
return false;
}
return true;
}
int main(int argc, char **argv)
{
int numprimes = 0;
for (uint64_t num = argc; num < 100000; num++)
{
if (stupid_isprime(num))
numprimes++;
}
return numprimes;
}
$ clang -ggdb -S -c -emit-llvm /tmp/expensive_loop.c -o
/tmp/expensive_loop.ll
$ perf record -o perf.data -g -k 1 ./bin/lli -jit-kind=mcjit /tmp/expensive_loop.ll 1
$ perf inject --jit -i perf.data -o perf.jit.data
$ perf report -i perf.jit.data
- 92.59% lli jitted-5881-2.so [.] stupid_isprime
stupid_isprime
main
llvm::MCJIT::runFunction
llvm::ExecutionEngine::runFunctionAsMain
main
__libc_start_main
0x4bf6258d4c544155
+ 0.85% lli ld-2.27.so [.] do_lookup_x
And line-level annotations also work:
│ for(uint64_t i = 3; i < num / 2; i+= 2) {
│1 30: movq $0x3,-0x18(%rbp)
0.03 │1 38: mov -0x18(%rbp),%rax
0.03 │ mov -0x10(%rbp),%rcx
│ shr $0x1,%rcx
3.63 │ ┌──cmp %rcx,%rax
│ ├──jae 6f
│ │ if (num % i == 0)
0.03 │ │ mov -0x10(%rbp),%rax
│ │ xor %edx,%edx
89.00 │ │ divq -0x18(%rbp)
│ │ cmp $0x0,%rdx
0.22 │ │↓ jne 5f
│ │ return false;
│ │ movb $0x0,-0x1(%rbp)
│ │↓ jmp 73
│ │ }
3.22 │1 5f:│↓ jmp 61
│ │ for(uint64_t i = 3; i < num / 2; i+= 2) {
Subscribers: mgorny, llvm-commits
Differential Revision: https://reviews.llvm.org/D44892
llvm-svn: 337789
Summary: The original text was lifted from the MCA README. I re-ran the dot-product example and updated the output seen in the docs. I also added a few paragraphs discussing the instruction issued and retired histograms, as well as discussing the register file stats.
Reviewers: andreadb, RKSimon, courbet, gbedwell, filcab
Reviewed By: andreadb
Subscribers: tschuett
Differential Revision: https://reviews.llvm.org/D49614
llvm-svn: 337648
For the most part, these changes were from the RFC. I made a few minor
word/structure changes, but nothing significant. I also regenerated the
example output, and adjusted the text accordingly.
Differential Revision: https://reviews.llvm.org/D49527
llvm-svn: 337496
Add some quick words for unroll and jam to the list of passes and add
unroll_and_jam metadata to the language ref.
Differential Revision: https://reviews.llvm.org/D49349
llvm-svn: 337448
Summary:
Updated and reorganized. Made the following additions:
1) How to see if ld.gold is installed, and whether it is the current
default.
2) How to install ld.gold as the default or alternatively use
-fuse-ld=gold.
3) Move the part about installing the newly built ld-new as the default
to the prior section and how to use --enable-gold=default to do it
automatically on install.
4) Add a note about ld.bfd supporting plugins but indicate that it is
not tested by the LLVM project and gold is the recommended linker for
use with the gold plugin.
Fixes PR32760.
Reviewers: davide
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D49490
llvm-svn: 337404
a Spectre v1 mitigation.
This was initially posted w/ the patch implementing this, got some basic
review there. Also, it is generated from a the Google doc that I shared
as part of the Speculative Load Hardening RFC and which has seen pretty
widespread review at this point.
However, as the patches are landing in LLVM, I wanted to land the docs
as well. But it seemed like a bad idea to have them in the same commit
in case of reverts or other things. So the docs are split out here.
Thanks for all the review so far, and further review and improvements to
the documentation here welcome. Please feel free to keep hammering on
the code review or Google document.
Note that this is a markdown document which Sphinx doesn't yet process.
But we can add support for that after and this should get picked up
(and I'm preparing patches for that). Also, this gets the document
itself into a nice shared place where we can iterate on it.
Differential Revision: https://reviews.llvm.org/D49433
llvm-svn: 337391
We need to explicitly state what happens when an invariant promised by
load metadata is violated at runtime, since it's come up repeatedly.
It's possible we want to specify that the result of the load is poison
in some cases, rather than undefined behavior, if the constraint is
violated. That would allow preserving the metadata when the load is
hoisted, but doesn't allow propagating metadata based on control flow.
We currently do transforms based on control flow for nonnull metadata
(in PromoteMemToReg).
Differential Revision: https://reviews.llvm.org/D47854
llvm-svn: 337325
Clarify that violating nnan and ninf can lead to undefined behavior.
This allows more aggressive optimizations based on those assumptions.
Differential Revision: https://reviews.llvm.org/D47963
llvm-svn: 337323
Hans Wennborg