This is only currently used for mad/fma transforms.
This is the only case where it should be used for AMDGPU,
so add an opcode to be sure.
llvm-svn: 315740
Reverting to investigate layering effects of MCJIT not linking
libCodeGen but using TargetMachine::getNameWithPrefix() breaking the
lldb bots.
This reverts commit r315633.
llvm-svn: 315637
Merge LLVMTargetMachine into TargetMachine.
- There is no in-tree target anymore that just implements TargetMachine
but not LLVMTargetMachine.
- It should still be possible to stub out all the various functions in
case a target does not want to use lib/CodeGen
- This simplifies the code and avoids methods ending up in the wrong
interface.
Differential Revision: https://reviews.llvm.org/D38489
llvm-svn: 315633
Add profitability checks for modifying counted loops to use the mtctr instruction.
The latency of mtctr is only justified if there are more than 4 comparisons that
will be removed as a result. Usually counted loops are formed relatively early
and before unrolling, so most low trip count loops often don't survive. However
we want to ensure that if they do, we do not mistakenly update them to mtctr loops.
Use CodeMetrics to ensure we are only doing this for small loops with small trip counts.
Differential Revision: https://reviews.llvm.org/D38212
llvm-svn: 315592
Summary:
Add LLVM_FORCE_ENABLE_DUMP cmake option, and use it along with
LLVM_ENABLE_ASSERTIONS to set LLVM_ENABLE_DUMP.
Remove NDEBUG and only use LLVM_ENABLE_DUMP to enable dump methods.
Move definition of LLVM_ENABLE_DUMP from config.h to llvm-config.h so
it'll be picked up by public headers.
Differential Revision: https://reviews.llvm.org/D38406
llvm-svn: 315590
Currently we produce a bunch of unnecessary code when emitting the
prologue/epilogue for spills/restores. Namely, if the load from stack
slot/store to stack slot instruction is an X-Form instruction, we will
always produce an LIS/ORI sequence for the stack offset.
Furthermore, we have not exploited the P9 vector D-Form loads/stores for this
purpose.
This patch address both issues.
Specifying the D-Form load as the instruction to use for stack spills/reloads
should be safe because:
1. The stack should be aligned according to the ABI
2. If the stack isn't aligned, PPCRegisterInfo::eliminateFrameIndex() will
check for the offset being a multiple of 16 and will convert it to an
X-Form instruction if it isn't.
Differential Revision : https://reviews.llvm.org/D38758
llvm-svn: 315500
This adds debug tracing to the table-generated assembly instruction matcher,
enabled by the -debug-only=asm-matcher option.
The changes in the target AsmParsers are to add an MCInstrInfo reference under
a consistent name, so that we can use it from table-generated code. This was
already being used this way for targets that use deprecation warnings, but 5
targets did not have it, and Hexagon had it under a different name to the other
backends.
llvm-svn: 315445
functions.
This makes the ownership of the resulting MCObjectWriter clear, and allows us
to remove one instance of MCObjectStreamer's bizarre "holding ownership via
someone else's reference" trick.
llvm-svn: 315327
A number of record form instructions were missing from the P9 scheduling
model. Added those instructions and marked the P9 model as complete.
Differential Revision: https://reviews.llvm.org/D38560
llvm-svn: 315313
The issue is that we assume operand zero of the input to the add instruction
is a register. In this case, the input comes from inline assembly and
operand zero is not a register thereby causing a crash.
The code will bail anyway if the input instruction doesn't have the right
opcode. So do that check first and let short-circuiting prevent the crash.
llvm-svn: 315285
ELFObjectWriter's constructor.
Fixes the same ownership issue for ELF that r315245 did for MachO:
ELFObjectWriter takes ownership of its MCELFObjectTargetWriter, so we want to
pass this through to the constructor via a unique_ptr, rather than a raw ptr.
llvm-svn: 315254
to MCObjectWriter's constructor.
MCObjectWriter takes ownership of its MCMachObjectTargetWriter argument -- this
patch plumbs that ownership relationship through the constructor (which
previously took raw MCMachObjectTargetWriter*) and the createMachObjectWriter
function.
llvm-svn: 315245
This patch add a support of ISD::ZERO_EXTEND in PPCDAGToDAGISel::tryBitPermutation to increase the opportunity to use rotate-and-mask by reordering ZEXT and ANDI.
Since tryBitPermutation stops analyzing nodes if it hits a ZEXT node while traversing SDNodes, we want to avoid ZEXT between two nodes that can be folded into a rotate-and-mask instruction.
For example, we allow these nodes
t9: i32 = add t7, Constant:i32<1>
t11: i32 = and t9, Constant:i32<255>
t12: i64 = zero_extend t11
t14: i64 = shl t12, Constant:i64<2>
to be folded into a rotate-and-mask instruction.
Such case often happens in array accesses with logical AND operation in the index, e.g. array[i & 0xFF];
Differential Revision: https://reviews.llvm.org/D37514
llvm-svn: 314655
This is a follow-on of D37211.
D37211 eliminates a compare instruction if two conditional branches can be made based on the one compare instruction, e.g.
if (a == 0) { ... }
else if (a < 0) { ... }
This patch extends this optimization to support partially redundant cases, which often happen in while loops.
For example, one compare instruction is moved from the loop body into the preheader by this optimization in the following example.
do {
if (a == 0) dummy1();
a = func(a);
} while (a > 0);
Differential Revision: https://reviews.llvm.org/D38236
llvm-svn: 314390
This patch makes analyzeBranch eliminate unconditional branch to the next instruction.
After basic blocks are re-organized by optimizers, such as machine block placement, a BB may end with an unconditional branch to the next (fallthrough) BB. This patch removes such redundant branch instruction.
Differential Revision: https://reviews.llvm.org/D37730
llvm-svn: 314297
In the past while, I've committed a number of patches in the PowerPC back end
aimed at eliminating comparison instructions. However, this causes some failures
in proprietary source and these issues are not observed in SPEC or any open
source packages I've been able to run.
As a result, I'm pulling the entire series and will refactor it to:
- Have a single entry point for easy control
- Have fine-grained control over which patterns we transform
A side-effect of this is that test cases for these patches (and modified by
them) are XFAIL-ed. This is a temporary measure as it is counter-productive
to remove/modify these test cases and then have to modify them again when
the refactored patch is recommitted.
The failure will be investigated in parallel to the refactoring effort and
the recommit will either have a fix for it or will leave this transformation
off by default until the problem is resolved.
llvm-svn: 314244
As mentioned in https://reviews.llvm.org/D33718, this simply adds another
pattern to the compare elimination sequence and is committed without a
differential review.
llvm-svn: 314106
Summary:
Right now there are two functions with the same name, one does the work
and the other one returns true if expansion is needed. Rename
TargetTransformInfo::expandMemCmp to make it more consistent with other
members of TargetTransformInfo.
Remove the unused Instruction* parameter.
Differential Revision: https://reviews.llvm.org/D38165
llvm-svn: 314096
As mentioned in https://reviews.llvm.org/D33718, this simply adds another
pattern to the compare elimination sequence and is committed without a
differential review.
llvm-svn: 314073
As mentioned in https://reviews.llvm.org/D33718, this simply adds another
pattern to the compare elimination sequence and is committed without a
differential revision.
llvm-svn: 314062
As mentioned in https://reviews.llvm.org/D33718, this simply adds another
pattern to the compare elimination sequence and is committed without a
differential revision.
llvm-svn: 314060
As mentioned in https://reviews.llvm.org/D33718, this simply adds another
pattern to the compare elimination sequence and is committed without a
differential revision.
llvm-svn: 314055
This patch just adds the missing information to the P9 scheduling model to allow
the model to be marked as complete.
The model has been verified against P9 documentation. The model was verified
with utils/schedcover.py.
Differential Revision: https://reviews.llvm.org/D35695
llvm-svn: 314026
Summary: Conditional returns were not taken into consideration at all. Implement them by turning them into jumps and normal returns. This means there is a slightly higher performance penalty for conditional returns, but this is the best we can do, and it still disturbs little of the rest.
Reviewers: dberris, echristo
Subscribers: sanjoy, nemanjai, hiraditya, kbarton, llvm-commits
Differential Revision: https://reviews.llvm.org/D38102
llvm-svn: 314005
This patch re-commits the patch that was pulled out due to a
problem it caused, but with a fix for the problem. The fix
was reviewed separately by Eric Christopher and Hal Finkel.
Differential Revision: https://reviews.llvm.org/D38054
llvm-svn: 313978
This patch updates register allocation to enable spilling gprs to
volatile vector registers rather than the stack. It can be enabled
for Power9 with option -ppc-enable-gpr-to-vsr-spills.
Differential Revision: https://reviews.llvm.org/D34815
llvm-svn: 313886
Two blocks prior to the join each perform an li and the the join block has an
add using the initialized register. Optimize each predecessor block to instead
use addi and delete the li's and add.
Differential Revision: https://reviews.llvm.org/D36734
llvm-svn: 313639
Implementing this pass as a PowerPC specific pass. Branch coalescing utilizes
the analyzeBranch method which currently does not include any implicit operands.
This is not an issue on PPC but must be handled on other targets.
Pass is currently off by default. Enabled via -enable-ppc-branch-coalesce.
Differential Revision : https: // reviews.llvm.org/D32776
llvm-svn: 313061
The lxv/stxv instructions require an offset that is 0 % 16. Previously we were
selecting lxv/stxv for loads and stores to the stack where the offset from the
slot was a multiple of 16, but the stack slot was not 16 or more byte aligned.
When the frame gets lowered these transform to r(1|31) + slot + offset.
If slot is not aligned, slot + offset may not be 0 % 16.
Now we require 16 byte or more alignment for select lxv/stxv to stack slots.
Includes a testcase that shows both sufficiently and insufficiently aligned
stack slots.
llvm-svn: 312843
Summary:
This fixes code-gen for XRay in PPC. The regression wasn't caught by
codegen tests which we add in this change.
What happened was the following:
- For tail exits, we used to unconditionally prepend the returns/exits
with a pseudo-instruction that gets lowered to the instrumentation
sled (and leave the actual return/exit instruction as-is).
- Changes to the XRay instrumentation pass caused the tail exits to
suddenly also emit the tail exit pseudo-instruction, since the check
for whether a return instruction was also a call instruction meant it
was a tail exit instruction.
- None of the tests caught the regression either due to non-existent
tests, or the tests being disabled/removed for continuous breakage.
This change re-introduces some of the basic tests and verifies that
we're back to a state that allows the back-end to generate appropriate
XRay instrumented binaries for PPC in the presence of tail exits.
Reviewers: echristo, timshen
Subscribers: nemanjai, kbarton, llvm-commits
Differential Revision: https://reviews.llvm.org/D37570
llvm-svn: 312772
If multiple conditional branches are executed based on the same comparison, we can execute multiple conditional branches based on the result of one comparison on PPC. For example,
if (a == 0) { ... }
else if (a < 0) { ... }
can be executed by one compare and two conditional branches instead of two pairs of a compare and a conditional branch.
This patch identifies a code sequence of the two pairs of a compare and a conditional branch and merge the compares if possible.
To maximize the opportunity, we do canonicalization of code sequence before merging compares.
For the above example, the input for this pass looks like:
cmplwi r3, 0
beq 0, .LBB0_3
cmpwi r3, -1
bgt 0, .LBB0_4
So, before merging two compares, we canonicalize it as
cmpwi r3, 0 ; cmplwi and cmpwi yield same result for beq
beq 0, .LBB0_3
cmpwi r3, 0 ; greather than -1 means greater or equal to 0
bge 0, .LBB0_4
The generated code should be
cmpwi r3, 0
beq 0, .LBB0_3
bge 0, .LBB0_4
Differential Revision: https://reviews.llvm.org/D37211
llvm-svn: 312514
This goes back to a discussion about IR canonicalization. We'd like to preserve and convert
more IR to 'select' than we currently do because that's likely the best choice in IR:
http://lists.llvm.org/pipermail/llvm-dev/2016-September/105335.html
...but that's often not true for codegen, so we need to account for this pattern coming in
to the backend and transform it to better DAG ops.
Steps in this patch:
1. Add an EVT param to the existing convertSelectOfConstantsToMath() TLI hook to more finely
enable this transform. Other targets will probably want that anyway to distinguish scalars
from vectors. We're using that here to exclude AVX512 targets, but it may not be necessary.
2. Convert a vselect to ext+add. This eliminates a constant load/materialization, and the
vector ext is often free.
Implementing a more general fold using xor+and can be a follow-up for targets that don't have
a legal vselect. It's also possible that we can remove the TLI hook for the special case fold
implemented here because we're eliminating a constant, but it needs to be tested on other
targets.
Differential Revision: https://reviews.llvm.org/D36840
llvm-svn: 311731
Implementing this pass as a PowerPC specific pass. Branch coalescing utilizes
the analyzeBranch method which currently does not include any implicit operands.
This is not an issue on PPC but must be handled on other targets.
Differential Revision : https: // reviews.llvm.org/D32776
llvm-svn: 311588
- recommitting after fixing a test failure on MacOS
On PPC64, OR (XOR) with a 32-bit immediate can be done with only two instructions, i.e. ori + oris.
But the current LLVM generates three or four instructions for this purpose (and also it clobbers one GPR).
This patch makes PPC backend generate ori + oris (xori + xoris) for OR (XOR) with a 32-bit immediate.
e.g. (x | 0xFFFFFFFF) should be
ori 3, 3, 65535
oris 3, 3, 65535
but LLVM generates without this patch
li 4, 0
oris 4, 4, 65535
ori 4, 4, 65535
or 3, 3, 4
Differential Revision: https://reviews.llvm.org/D34757
llvm-svn: 311538
On PPC64, OR (XOR) with a 32-bit immediate can be done with only two instructions, i.e. ori + oris.
But the current LLVM generates three or four instructions for this purpose (and also it clobbers one GPR).
This patch makes PPC backend generate ori + oris (xori + xoris) for OR (XOR) with a 32-bit immediate.
e.g. (x | 0xFFFFFFFF) should be
ori 3, 3, 65535
oris 3, 3, 65535
but LLVM generates without this patch
li 4, 0
oris 4, 4, 65535
ori 4, 4, 65535
or 3, 3, 4
Differential Revision: https://reviews.llvm.org/D34757
llvm-svn: 311526
For the medium and large code models we only need to check if a call crosses
dso-boundaries when considering tail-call elgibility.
Differential Revision: https://reviews.llvm.org/D34245
llvm-svn: 311353
Preparations to use the per-increment are sometimes done in the target
independent pass Loop Strength Reduction. We try to detect them in the PowerPC
specific pass so that they are not done twice and so that we do not add PHIs
that are not required.
Differential Revision: https://reviews.llvm.org/D36736
llvm-svn: 311332
Add codegen for VSX word extract conversion from signed/unsigned to single/double
precision.
For UINT_TO_FP:
Extract word unsigned and convert to float was implemented in https://reviews.llvm.org/D20239.
Here we will add the missing extract integer and conversion to double. This
utilizes the new P9 instruction xxextractuw to extracting an integer element
when the result will be converted to double thereby saving 2 direct moves
(VSR <-> GPR).
For SINT_TO_FP:
We will implement the following sequence which will also reduce the number of
instructions by saving 2 direct moves.
v4i32->f32:
xxspltw
xvcvsxwsp
xscvspdpn
v4i32->f64:
xxspltw
xvcvsxwdp
Differential Revision: https://reviews.llvm.org/D35859
llvm-svn: 310866
introduce a miscompile bug.
There appears to be a bug where the generated code to extract the sign
bit doesn't work correctly for 32-bit inputs. I've replied to the
original commit pointing out the problem. I think I see by inspection
(and reading the manual for PPC) how to fix this, but I can't be 100%
confident and I also don't know what the best way to test this is.
Currently it seems nearly impossible to get the backend to hit this code
path, but the patch autohr is likely in a better position to craft such
test cases than I am, and based on where the bug is it should be easily
done.
Original commit message for r310346:
"""
[PowerPC] Eliminate compares - add i32 sext/zext handling for SETLE/SETGE
Adds handling for SETLE/SETGE comparisons on i32 values. Furthermore, it
adds the handling for the special case where RHS == 0.
Differential Revision: https://reviews.llvm.org/D34048
"""
llvm-svn: 310809
The liveness-tracking code assumes that the registers that were saved
in the function's prolog are live outside of the function. Specifically,
that registers that were saved are also live-on-exit from the function.
This isn't always the case as illustrated by the LR register on ARM.
Differential Revision: https://reviews.llvm.org/D36160
llvm-svn: 310619
We've implemented a 1-byte splat using XXSPLTISB on P9. However, LLVM will
produce a 1-byte splat even for wider element BUILD_VECTOR nodes. This patch
prevents crashing in that situation.
Differential Revision: https://reviews.llvm.org/D35650
llvm-svn: 310358
Adds handling for SETLE/SETGE comparisons on i32 values. Furthermore, it adds
the handling for the special case where RHS == 0.
Differential Revision: https://reviews.llvm.org/D34048
llvm-svn: 310346
IMHO it is an antipattern to have a enum value that is Default.
At any given piece of code it is not clear if we have to handle
Default or if has already been mapped to a concrete value. In this
case in particular, only the target can do the mapping and it is nice
to make sure it is always done.
This deletes the two default enum values of CodeModel and uses an
explicit Optional<CodeModel> when it is possible that it is
unspecified.
llvm-svn: 309911
Power 9 has instructions to do absolute difference (VABSDUB, VABSDUH, VABSDUW)
for byte, halfword and word. We should take advantage of these.
Differential Revision: https://reviews.llvm.org/D34684
llvm-svn: 309876
Changed method names based on the discussion in https://reviews.llvm.org/D34986:
getInt64 -> selectI64Imm,
getInt64Count -> selectI64ImmInstrCount.
llvm-svn: 309541
In optimizeCompareInstr, a compare instruction is eliminated by using a record form instruction if possible.
If the branch instruction that uses the result of the compare has a static branch hint, the optimization does not happen.
This patch makes this optimization happen regardless of the branch hint by splitting branch hint and branch condition before checking the predicate to identify the possible optimizations.
Differential Revision: https://reviews.llvm.org/D35801
llvm-svn: 309255
This patch just adds printing of CR bit registers in a more human-readable
form akin to that used by the GNU binutils.
Differential Revision: https://reviews.llvm.org/D31494
llvm-svn: 309001
MIR SRADI uses instruction template XSForm_1rc which declares Defs = [CARRY]. But MIR SRADI_32 uses instruction template XSForm_1, and it doesn't declare such implicit definition. With patch D33720 it causes wrong code generation for perl.
This patch adds the implicit definition.
Differential Revision: https://reviews.llvm.org/D35699
llvm-svn: 308780
This patch makes LSR generate better code for SystemZ in the cases of memory
intrinsics, Load->Store pairs or comparison of immediate with memory.
In order to achieve this, the following common code changes were made:
* New TTI hook: LSRWithInstrQueries(), which defaults to false. Controls if
LSR should do instruction-based addressing evaluations by calling
isLegalAddressingMode() with the Instruction pointers.
* In LoopStrengthReduce: handle address operands of memset, memmove and memcpy
as address uses, and call isFoldableMemAccessOffset() for any LSRUse::Address,
not just loads or stores.
SystemZ changes:
* isLSRCostLess() implemented with Insns first, and without ImmCost.
* New function supportedAddressingMode() that is a helper for TTI methods
looking at Instructions passed via pointers.
Review: Ulrich Weigand, Quentin Colombet
https://reviews.llvm.org/D35262https://reviews.llvm.org/D35049
llvm-svn: 308729
As outlined in the PR, we didn't ensure that displacements for DQ-Form
instructions are multiples of 16. Since the instruction encoding encodes
a quad-word displacement, a sub-16 byte displacement is meaningless and
ends up being encoded incorrectly.
Fixes https://bugs.llvm.org/show_bug.cgi?id=33671.
Differential Revision: https://reviews.llvm.org/D35007
llvm-svn: 307934
The issue is not if the value is pcrel. It is whether we have a
relocation or not.
If we have a relocation, the static linker will select the upper
bits. If we don't have a relocation, we have to do it.
llvm-svn: 307730
1. The available program storage region of the red zone to compilers is 288
bytes rather than 244 bytes.
2. The formula for negative number alignment calculation should be
y = x & ~(n-1) rather than y = (x + (n-1)) & ~(n-1).
Differential Revision: https://reviews.llvm.org/D34337
llvm-svn: 307672
In the POWER9 instruction scheduler, SchedWriteRes for the simple integer instructions are misconfigured to use that of (costly) DFU instructions.
This results in surprisingly long instruction latency estimation and causes misbehavior in some optimizers such as if-conversion.
Differential Revision: https://reviews.llvm.org/D34869
llvm-svn: 307624
This patch reduces compilation time by avoiding redundant analysis while selecting instructions to create an immediate.
If the instruction count required to create the input number without rotate is 2, we do not need further analysis to find a shorter instruction sequence with rotate; rotate + load constant cannot be done by 1 instruction (i.e. getInt64CountDirectnever return 0).
This patch should not change functionality.
Differential Revision: https://reviews.llvm.org/D34986
llvm-svn: 307623
For this example:
float test (int *arr) {
return arr[2];
}
We currently generate the following code:
li r4, 8
lxsiwax f0, r3, r4
xscvsxdsp f1, f0
With this patch, we will now generate:
addi r3, r3, 8
lxsiwax f0, 0, r3
xscvsxdsp f1, f0
Originally reported in: https://bugs.llvm.org/show_bug.cgi?id=27204
Differential Revision: https://reviews.llvm.org/D35027
llvm-svn: 307553
On power 8 we sometimes insert swaps to deal with the difference between
Little-Endian and Big-Endian. The swap removal pass is supposed to clean up
these swaps. On power 9 we don't need this pass since we do not need to insert
the swaps in the first place.
Commiting on behalf of Stefan Pintilie.
Differential Revision: https://reviews.llvm.org/D34627
llvm-svn: 307185
This patch adds the exploitation for new power 9 instructions which extract
variable elements from vectors:
VEXTUBLX
VEXTUBRX
VEXTUHLX
VEXTUHRX
VEXTUWLX
VEXTUWRX
Differential Revision: https://reviews.llvm.org/D34032
Commit on behalf of Zaara Syeda (syzaara@ca.ibm.com)
llvm-svn: 307174
This patch adds on to the exploitation added by https://reviews.llvm.org/D33510.
This now catches build vector nodes where the inputs are coming from sign
extended vector extract elements where the indices used by the vector extract
are not correct. We can still use the new hardware instructions by adding a
shuffle to move the elements to the correct indices. I introduced a new PPCISD
node here because adding a vector_shuffle and changing the elements of the
vector_extracts was getting undone by another DAG combine.
Commit on behalf of Zaara Syeda (syzaara@ca.ibm.com)
Differential Revision: https://reviews.llvm.org/D34009
llvm-svn: 307169
This patch fixes a verification error with -verify-machineinstrs while expanding __tls_get_addr by not creating ADJCALLSTACKUP and ADJCALLSTACKDOWN if there is another ADJCALLSTACKUP in this basic block since nesting ADJCALLSTACKUP/ADJCALLSTACKDOWN is not allowed.
Here, ADJCALLSTACKUP and ADJCALLSTACKDOWN are created as a fence for instruction scheduling to avoid _tls_get_addr is scheduled before mflr in the prologue (https://bugs.llvm.org//show_bug.cgi?id=25839). So if another ADJCALLSTACKUP exists before _tls_get_addr, we do not need to create a new ADJCALLSTACKUP.
Differential Revision: https://reviews.llvm.org/D34347
llvm-svn: 306678
PowerPC backend does not pass the current optimization level to SelectionDAGISel and so SelectionDAGISel works with the default optimization level regardless of the current optimization level.
This patch makes the PowerPC backend set the optimization level correctly.
Differential Revision: https://reviews.llvm.org/D34615
llvm-svn: 306367
processFixupValue is called on every relaxation iteration. applyFixup
is only called once at the very end. applyFixup is then the correct
place to do last minute changes and value checks.
While here, do proper range checks again for fixup_arm_thumb_bl. We
used to do it, but dropped because of thumb2. We now do it again, but
use the thumb2 range.
llvm-svn: 306177
Define target hook isReallyTriviallyReMaterializable() to explicitly specify
PowerPC instructions that are trivially rematerializable. This will allow
the MachineLICM pass to accurately identify PPC instructions that should always
be hoisted.
Differential Revision: https://reviews.llvm.org/D34255
llvm-svn: 305932
Summary:
This is my misunderstanding on isBarrier. It's not for memory barriers,
but for other control flow purposes. lwsync doesn't have it either.
This fixes a simple crash with -verify-machineinstrs like below:
define void @Foo() {
entry:
%tmp = load atomic i64, i64* undef acquire, align 8
unreachable
}
I deliberately don't want to check in the test, since there is little
chance to regress on such a mistake. Such a test adds noise to the code
base.
I plan to check in first, since it fixes a crash, and the fix is obvious.
Reviewers: kbarton, echristo
Subscribers: sanjoy, nemanjai, hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D34314
llvm-svn: 305624
Add condition for MachineLICM to safely hoist instructions that utilize
non constant registers that are reserved.
On PPC, global variable access is done through the table of contents (TOC)
which is always in register X2. The ABI reserves this register in any
functions that have calls or access global variables.
A call through a function pointer involves saving, changing and restoring
this register around the call and thus MachineLICM does not consider it to
be invariant. We can however guarantee the register is preserved across the
call and thus is invariant.
Differential Revision: https://reviews.llvm.org/D33562
llvm-svn: 305490
This patch fixes a potential verification error (64-bit register operands for cmpw) with -verify-machineinstrs.
Differential Revision: https://reviews.llvm.org/D34208
llvm-svn: 305479
Power9 has instructions that will reverse the bytes within an element for all
sizes (half-word, word, double-word and quad-word). These can be used for the
vec_revb builtins in altivec.h. However, we implement these to match vector
shuffle nodes as that will cover both the builtins and vector shuffles that
occur in the SDAG through other means.
Differential Revision: https://reviews.llvm.org/D33690
llvm-svn: 305214
Note that if we need the result of both the divide and the modulo then we
compute the modulo based on the result of the divide and not using the new
hardware instruction.
Commit on behalf of STEFAN PINTILIE.
Differential Revision: https://reviews.llvm.org/D33940
llvm-svn: 305210
This step is just intended to reduce code duplication rather than change any functionality.
A follow-up would be to replace PPCTargetLowering::spliceIntoChain() usage with this new helper.
Differential Revision: https://reviews.llvm.org/D33649
llvm-svn: 305192
Summary: The method TargetTransformInfo::getRegisterBitWidth() is declared const, but the type erasing implementation classes (TargetTransformInfo::Concept & TargetTransformInfo::Model) that were introduced by Chandler in https://reviews.llvm.org/D7293 do not have the method declared const. This is an NFC to tidy up the const consistency between TTI and its implementation.
Reviewers: chandlerc, rnk, reames
Reviewed By: reames
Subscribers: reames, jfb, arsenm, dschuff, nemanjai, nhaehnle, javed.absar, sbc100, jgravelle-google, llvm-commits
Differential Revision: https://reviews.llvm.org/D33903
llvm-svn: 305189
In PPCBoolRetToInt bool value is changed to i32 type. On ppc64 it may introduce an extra zero extension for the return value. This patch changes the integer type to i64 to avoid the zero extension on ppc64.
This patch fixed PR32442.
Differential Revision: https://reviews.llvm.org/D31407
llvm-svn: 305001
This creates a new library called BinaryFormat that has all of
the headers from llvm/Support containing structure and layout
definitions for various types of binary formats like dwarf, coff,
elf, etc as well as the code for identifying a file from its
magic.
Differential Revision: https://reviews.llvm.org/D33843
llvm-svn: 304864
I did this a long time ago with a janky python script, but now
clang-format has built-in support for this. I fed clang-format every
line with a #include and let it re-sort things according to the precise
LLVM rules for include ordering baked into clang-format these days.
I've reverted a number of files where the results of sorting includes
isn't healthy. Either places where we have legacy code relying on
particular include ordering (where possible, I'll fix these separately)
or where we have particular formatting around #include lines that
I didn't want to disturb in this patch.
This patch is *entirely* mechanical. If you get merge conflicts or
anything, just ignore the changes in this patch and run clang-format
over your #include lines in the files.
Sorry for any noise here, but it is important to keep these things
stable. I was seeing an increasing number of patches with irrelevant
re-ordering of #include lines because clang-format was used. This patch
at least isolates that churn, makes it easy to skip when resolving
conflicts, and gets us to a clean baseline (again).
llvm-svn: 304787
This adds a callback to the LLVMTargetMachine that lets target indicate
that they do not pass the machine verifier checks in all cases yet.
This is intended to be a temporary measure while the targets are fixed
allowing us to enable the machine verifier by default with
EXPENSIVE_CHECKS enabled!
Differential Revision: https://reviews.llvm.org/D33696
llvm-svn: 304320
Fixes PPCTTIImpl::getCacheLineSize() returning the wrong cache line size for
newer ppc processors.
Commiting on behalf of Stefan Pintilie.
Differential Revision: https://reviews.llvm.org/D33656
llvm-svn: 304317
This patch does an inline expansion of memcmp.
It changes the memcmp library call into an inline expansion when the size is
known at compile time and is under a target specified threshold.
This expansion is implemented in CodeGenPrepare and expands into straight line
code. The target specifies a maximum load size and the expansion works by using
this size to load the two sources, compare, and exit early if a difference is
found. It also has a special case when the memcmp result is used in a compare
to zero equality.
Differential Revision: https://reviews.llvm.org/D28637
llvm-svn: 304313
There are some VectorShuffle Nodes in SDAG which can be selected to XXPERMDI
Instruction, this patch recognizes them and does the selection to improve
the PPC performance.
Differential Revision: https://reviews.llvm.org/D33404
llvm-svn: 304298
This patch builds upon https://reviews.llvm.org/rL302810 to add
handling for bitwise logical operations in general purpose registers.
The idea is to keep the values in GPRs as long as possible - only
extracting them to a condition register bit when no further operations
are to be done.
Differential Revision: https://reviews.llvm.org/D31851
llvm-svn: 304282
TargetPassConfig is not useful for targets that do not use the CodeGen
library, so we may just as well store a pointer to an
LLVMTargetMachine instead of just to a TargetMachine.
While at it, also change the constructor to take a reference instead of a
pointer as the TM must not be nullptr.
llvm-svn: 304247
Summary:
Currently FPOWI defaults to Legal and LegalizeDAG.cpp turns Legal into Expand for this opcode because Legal is a "lie".
This patch changes the default for this opcode to Expand and removes the hack from LegalizeDAG.cpp. It also removes all the code in the targets that set this opcode to Expand themselves since they can just rely on the default.
Reviewers: spatel, RKSimon, efriedma
Reviewed By: RKSimon
Subscribers: jfb, dschuff, sbc100, jgravelle-google, nemanjai, javed.absar, andrew.w.kaylor, llvm-commits
Differential Revision: https://reviews.llvm.org/D33530
llvm-svn: 304215
Summary
clang -c -mcpu=pwr9 test/CodeGen/PowerPC/build-vector-tests.ll causes an assertion failure during the binary encoding.
The failure occurs when a D-form load instruction takes two register operands instead of a register + an immediate.
This patch fixes the problem and also adds an assertion to catch this failure earlier before the binary encoding (i.e. during lit test).
The fix is from Nemanja Ivanovic @nemanjai.
Differential Revision: https://reviews.llvm.org/D33482
llvm-svn: 304133
I forgot to forward the chain, causing some missing instruction
dependencies. The test crashes the compiler without this patch.
Inspired by the test case, D33519 also tries to remove the extra sync.
Differential Revision: https://reviews.llvm.org/D33573
llvm-svn: 303931
PPC::GETtlsADDR is lowered to a branch and a nop, by the assembly
printer. Its size was incorrectly marked as 4, correct it to 8. The
incorrect size can cause incorrect branch relaxation in
PPCBranchSelector under the right conditions.
llvm-svn: 303904
There are some VectorShuffle Nodes in SDAG which can be selected to XXSLDWI
instruction, this patch recognizes them and does the selection to improve the
PPC performance.
llvm-svn: 303822
PPC backend eliminates compare instructions by using record-form instructions in PPCInstrInfo::optimizeCompareInstr, which is called from peephole optimization pass.
This patch improves this optimization to eliminate more compare instructions in two types of common case.
- comparison against a constant 1 or -1
The record-form instructions set CR bit based on signed comparison against 0. So, the current implementation does not exploit the record-form instruction for comparison against a non-zero constant.
This patch enables record-form optimization for constant of 1 or -1 if possible; it changes the condition "greater than -1" into "greater than or equal to 0" and "less than 1" into "less than or equal to 0".
With this patch, compare can be eliminated in the following code sequence, as an example.
uint64_t a, b;
if ((a | b) & 0x8000000000000000ull) { ... }
else { ... }
- andi for 32-bit comparison on PPC64
Since record-form instructions execute 64-bit signed comparison and so we have limitation in eliminating 32-bit comparison, i.e. with cmplwi, using the record-form. The original implementation already has such checks but andi. is not recognized as an instruction which executes implicit zero extension and hence safe to convert into record-form if used for equality check.
%1 = and i32 %a, 10
%2 = icmp ne i32 %1, 0
br i1 %2, label %foo, label %bar
In this simple example, LLVM generates andi. + cmplwi + beq on PPC64.
This patch make it possible to eliminate the cmplwi for this case.
I added andi. for optimization targets if it is safe to do so.
Differential Revision: https://reviews.llvm.org/D30081
llvm-svn: 303500
This provides a new way to access the TargetMachine through
TargetPassConfig, as a dependency.
The patterns replaced here are:
* Passes handling a null TargetMachine call
`getAnalysisIfAvailable<TargetPassConfig>`.
* Passes not handling a null TargetMachine
`addRequired<TargetPassConfig>` and call
`getAnalysis<TargetPassConfig>`.
* MachineFunctionPasses now use MF.getTarget().
* Remove all the TargetMachine constructors.
* Remove INITIALIZE_TM_PASS.
This fixes a crash when running `llc -start-before prologepilog`.
PEI needs StackProtector, which gets constructed without a TargetMachine
by the pass manager. The StackProtector pass doesn't handle the case
where there is no TargetMachine, so it segfaults.
Related to PR30324.
Differential Revision: https://reviews.llvm.org/D33222
llvm-svn: 303360
When legalizing vector operations on vNi128, they will be split to v1i128
because that is a legal type on ppc64, but then the compiler will crash in
selection dag because it fails to select for these operations. This patch fixes
shift operations. Logical shift right and left shift can be performed in the
vector unit, but algebraic shift right requires being split.
Differential Revision: https://reviews.llvm.org/D32774
llvm-svn: 303307
The variables MinGPR/MinG8R were not updated properly when resetting the
offsets, which in the included testcase lead to saving the CR register
in the same location as R30.
This fixes another issue reported in PR26519.
Differential Revision: https://reviews.llvm.org/D33017
llvm-svn: 303257
Summary:
This fixes pr32392.
The lowering pipeline is:
llvm.ppc.cfence in IR -> PPC::CFENCE8 in isel -> Actual instructions in
expandPostRAPseudo.
The reason why expandPostRAPseudo is chosen is because previous passes
are likely eliminating instructions like cmpw 3, 3 (early CSE) and bne-
7, .+4 (some branch pass(s)).
Differential Revision: https://reviews.llvm.org/D32763
llvm-svn: 303205
Summary:
Eli pointed out that it's unsafe to combine the shifts to ISD::SHL etc.,
because those are not defined for b > sizeof(a) * 8, even after some of
the combiners run.
However, PPCISD::SHL defines that behavior (as the instructions themselves).
Move the combination to the backend.
The tests in shift_mask.ll still pass.
Reviewers: echristo, hfinkel, efriedma, iteratee
Subscribers: nemanjai, llvm-commits
Differential Revision: https://reviews.llvm.org/D33076
llvm-svn: 302937
According to Power ISA V3.0 document, the first source operand of mtvsrdd is constant 0 if r0 is specified. So the corresponding register constraint should be g8rc_nox0.
This bug caused wrong output generated by 401.bzip2 when -mcpu=power9 and fdo are specified.
Differential Revision: https://reviews.llvm.org/D32880
llvm-svn: 302834
This patch is the first in a series of patches to provide code gen for
doing compares in GPRs when the compare result is required in a GPR.
It adds the infrastructure to select GPR sequences for i1->i32 and i1->i64
extensions. This first patch handles equality comparison on i32 operands with
the result sign or zero extended.
Differential Revision: https://reviews.llvm.org/D31847
llvm-svn: 302810
Now both emitLeadingFence and emitTrailingFence take the instruction
itself, instead of taking IsLoad/IsStore pairs.
Instruction::mayReadFromMemory and Instrucion::mayWriteToMemory are used
for determining those two booleans.
The instruction argument is also useful for later D32763, in
emitTrailingFence. For emitLeadingFence, it seems to have cleaner
interface with the proposed change.
Differential Revision: https://reviews.llvm.org/D32762
llvm-svn: 302539
Using arguments with attribute inalloca creates problems for verification
of machine representation. This attribute instructs the backend that the
argument is prepared in stack prior to CALLSEQ_START..CALLSEQ_END
sequence (see http://llvm.org/docs/InAlloca.htm for details). Frame size
stored in CALLSEQ_START in this case does not count the size of this
argument. However CALLSEQ_END still keeps total frame size, as caller can
be responsible for cleanup of entire frame. So CALLSEQ_START and
CALLSEQ_END keep different frame size and the difference is treated by
MachineVerifier as stack error. Currently there is no way to distinguish
this case from actual errors.
This patch adds additional argument to CALLSEQ_START and its
target-specific counterparts to keep size of stack that is set up prior to
the call frame sequence. This argument allows MachineVerifier to calculate
actual frame size associated with frame setup instruction and correctly
process the case of inalloca arguments.
The changes made by the patch are:
- Frame setup instructions get the second mandatory argument. It
affects all targets that use frame pseudo instructions and touched many
files although the changes are uniform.
- Access to frame properties are implemented using special instructions
rather than calls getOperand(N).getImm(). For X86 and ARM such
replacement was made previously.
- Changes that reflect appearance of additional argument of frame setup
instruction. These involve proper instruction initialization and
methods that access instruction arguments.
- MachineVerifier retrieves frame size using method, which reports sum of
frame parts initialized inside frame instruction pair and outside it.
The patch implements approach proposed by Quentin Colombet in
https://bugs.llvm.org/show_bug.cgi?id=27481#c1.
It fixes 9 tests failed with machine verifier enabled and listed
in PR27481.
Differential Revision: https://reviews.llvm.org/D32394
llvm-svn: 302527
This adds routines for reseting KnownBits to unknown, making the value all zeros or all ones. It also adds methods for querying if the value is zero, all ones or unknown.
Differential Revision: https://reviews.llvm.org/D32637
llvm-svn: 302262
This happened on the PPC32/SVR4 path and was discovered when building
FreeBSD on PPC32. It was a typo-class error in the frame lowering code.
This fixes PR26519.
llvm-svn: 302183
Summary:
This is the corresponding llvm change to D28037 to ensure no performance
regression.
Reviewers: bogner, kbarton, hfinkel, iteratee, echristo
Subscribers: nemanjai, llvm-commits
Differential Revision: https://reviews.llvm.org/D28329
llvm-svn: 301990
Fixes PR30730.
This is a re-commit of a pulled commit. The commit was pulled because some
software projects contained uses of Altivec vectors that violated alignment
requirements. Known issues have now been fixed.
Committing on behalf of Lei Huang.
Differential Revision: https://reviews.llvm.org/D26861
llvm-svn: 301892
This patch replaces the separate APInts for KnownZero/KnownOne with a single KnownBits struct. This is similar to what was done to ValueTracking's version recently.
This is largely a mechanical transformation from KnownZero to Known.Zero.
Differential Revision: https://reviews.llvm.org/D32569
llvm-svn: 301620
1. RegisterClass::getSize() is split into two functions:
- TargetRegisterInfo::getRegSizeInBits(const TargetRegisterClass &RC) const;
- TargetRegisterInfo::getSpillSize(const TargetRegisterClass &RC) const;
2. RegisterClass::getAlignment() is replaced by:
- TargetRegisterInfo::getSpillAlignment(const TargetRegisterClass &RC) const;
This will allow making those values depend on subtarget features in the
future.
Differential Revision: https://reviews.llvm.org/D31783
llvm-svn: 301221
In addition to the original commit, tighten the condition for when to
pad empty functions to COFF Windows. This avoids running into problems
when targeting e.g. Win32 AMDGPU, which caused test failures when this
was committed initially.
llvm-svn: 301047
Empty functions can lead to duplicate entries in the Guard CF Function
Table of a binary due to multiple functions sharing the same RVA,
causing the kernel to refuse to load that binary.
We had a terrific bug due to this in Chromium.
It turns out we were already doing this for Mach-O in certain
situations. This patch expands the code for that in
AsmPrinter::EmitFunctionBody() and renames
TargetInstrInfo::getNoopForMachoTarget() to simply getNoop() since it
seems it was used for not just Mach-O anyway.
Differential Revision: https://reviews.llvm.org/D32330
llvm-svn: 301040
This will become asan errors once the patch lands that poisons the
memory after free. The x86 change is a hack, but I don't see how to
solve this properly at the moment.
llvm-svn: 300867
getArithmeticInstrCost(), getShuffleCost(), getCastInstrCost(),
getCmpSelInstrCost(), getVectorInstrCost(), getMemoryOpCost(),
getInterleavedMemoryOpCost() implemented.
Interleaved access vectorization enabled.
BasicTTIImpl::getCastInstrCost() improved to check for legal extending loads,
in which case the cost of the z/sext instruction becomes 0.
Review: Ulrich Weigand, Renato Golin.
https://reviews.llvm.org/D29631
llvm-svn: 300052
Check the legality of ISD::[US]MULO to see whether
Intrinsic::[us]mul_with_overflow will legalize into a function call (and, thus,
will use the CTR register). Fixes PR32485.
Patch by Tim Neumann!
Differential Revision: https://reviews.llvm.org/D31790
llvm-svn: 299910
This is a generic combine enabled via target hook to reduce icmp logic as discussed in:
https://bugs.llvm.org/show_bug.cgi?id=32401
It's likely that other targets will want to enable this hook for scalar transforms,
and there are probably other patterns that can use bitwise logic to reduce comparisons.
Note that we are missing an IR canonicalization for these patterns, and we will probably
prefer the pair-of-compares form in IR (shorter, more likely to fold).
Differential Revision: https://reviews.llvm.org/D31483
llvm-svn: 299542
A number of backends (AArch64, MIPS, ARM) have been using
MCContext::reportError to report issues such as out-of-range fixup values in
their TgtAsmBackend. This is great, but because MCContext couldn't easily be
threaded through to the adjustFixupValue helper function from its usual
callsite (applyFixup), these backends ended up adding an MCContext* argument
and adding another call to applyFixup to processFixupValue. Adding an
MCContext parameter to applyFixup makes this unnecessary, and even better -
applyFixup can take a reference to MCContext rather than a potentially null
pointer.
Differential Revision: https://reviews.llvm.org/D30264
llvm-svn: 299529
Follow up to D25691, this sets up the plumbing necessary to support vector demanded elements support in known bits calculations in target nodes.
Differential Revision: https://reviews.llvm.org/D31249
llvm-svn: 299201
In PPCBoolRetToInt bool value is changed to i32 type. On ppc64 it may introduce an extra zero extension for the return value. This patch changes the integer type to i64 to avoid the zero extension on ppc64.
This patch fixed PR32442.
Differential Revision: https://reviews.llvm.org/D31407
llvm-svn: 298955
Users often call getArgumentList().size(), which is a linear way to get
the number of function arguments. arg_size(), on the other hand, is
constant time.
In general, the fact that arguments are stored in an iplist is an
implementation detail, so I've removed it from the Function interface
and moved all other users to the argument container APIs (arg_begin(),
arg_end(), args(), arg_size()).
Reviewed By: chandlerc
Differential Revision: https://reviews.llvm.org/D31052
llvm-svn: 298010
mfvrd and mffprd are both alias to mfvrsd.
This patch enables correct parsing of the aliases, but we still emit a mfvrsd.
Committing on behalf of brunoalr (Bruno Rosa).
Differential Revision: https://reviews.llvm.org/D29177
llvm-svn: 297849
After inspection, it's an UB in our code base. Someone cast a var-arg
function pointer to a non-var-arg one. :/
Re-commit r296771 to continue testing on the patch.
Sorry for the trouble!
llvm-svn: 297256
This reverts commit r296771.
We found some wide spread test failures internally. I'm working on a
testcase. Politely revert the patch in the mean time. :)
llvm-svn: 297124
select Cond, C +/- 1, C --> add(ext Cond), C -- with a target hook.
This is part of the ongoing process to obsolete D24480. The motivation is to
canonicalize to select IR in InstCombine whenever possible, so we need to have a way to
undo that easily in codegen.
PowerPC is an obvious winner for this kind of transform because it has fast and complete
bit-twiddling abilities but generally lousy conditional execution perf (although this might
have changed in recent implementations).
x86 also sees some wins, but the effect is limited because these transforms already mostly
exist in its target-specific combineSelectOfTwoConstants(). The fact that we see any x86
changes just shows that that code is a mess of special-case holes. We may be able to remove
some of that logic now.
My guess is that other targets will want to enable this hook for most cases. The likely
follow-ups would be to add value type and/or the constants themselves as parameters for the
hook. As the tests in select_const.ll show, we can transform any select-of-constants to
math/logic, but the general transform for any 2 constants needs one more instruction
(multiply or 'and').
ARM is one target that I think may not want this for most cases. I see infinite loops there
because it wants to use selects to enable conditionally executed instructions.
Differential Revision: https://reviews.llvm.org/D30537
llvm-svn: 296977
This patch fixes pr32063.
Current code in PPCTargetLowering::PerformDAGCombine can transform
bswap
store
into a single PPCISD::STBRX instruction. but it doesn't consider the case that the operand size of bswap may be larger than store size. When it occurs, we need 2 modifications,
1 For the last operand of PPCISD::STBRX, we should not use DAG.getValueType(N->getOperand(1).getValueType()), instead we should use cast<StoreSDNode>(N)->getMemoryVT().
2 Before PPCISD::STBRX, we need to shift the original operand of bswap to the right side.
Differential Revision: https://reviews.llvm.org/D30362
llvm-svn: 296811
This patch reduces the stack frame size by not allocating the parameter area if
it is not required. In the current implementation LowerFormalArguments_64SVR4
already handles the parameter area, but LowerCall_64SVR4 does not
(when calculating the stack frame size). What this patch does is make
LowerCall_64SVR4 consistent with LowerFormalArguments_64SVR4.
Committing on behalf of Hiroshi Inoue.
Differential Revision: https://reviews.llvm.org/D29881
llvm-svn: 296771
Provide a 64-bit pattern to use SUBFIC for subtracting from a 16-bit immediate.
The corresponding pattern already exists for 32-bit integers.
Committing on behalf of Hiroshi Inoue.
Differential Revision: https://reviews.llvm.org/D29387
llvm-svn: 296144
Emit clrrdi (extended mnemonic for rldicr) for AND-ing with masks that
clear bits from the right hand size.
Committing on behalf of Hiroshi Inoue.
Differential Revision: https://reviews.llvm.org/D29388
llvm-svn: 296143
Newer ppc supports unaligned memory access, it reduces the cost of unaligned memory access significantly. This patch handles this case in PPCTTIImpl::getMemoryOpCost.
This patch fixes pr31492.
Differential Revision: https://reviews.llvm.org/D28630
This is resubmit of r292680, which was reverted by r293092. The internal application failures were actually caused by a source code bug.
llvm-svn: 295506
Summary:
powerpc64 big-endian is not supported, but I believe that most logic can
be shared, except for xray_powerpc64.cc.
Also add a function InvalidateInstructionCache to xray_util.h, which is
copied from llvm/Support/Memory.cpp. I'm not sure if I need to add a unittest,
and I don't know how.
Reviewers: dberris, echristo, iteratee, kbarton, hfinkel
Subscribers: mehdi_amini, nemanjai, mgorny, llvm-commits
Differential Revision: https://reviews.llvm.org/D29742
llvm-svn: 294781
until we can get better TargetMachine::isCompatibleDataLayout to compare - otherwise
we can't code generate existing bitcode without a string equality data layout.
This reverts commit r294702.
llvm-svn: 294709
Aaron Ballman