functions in C++, e.g.,
struct X {
operator bool() const;
};
Note that these conversions don't actually do anything, since we don't
yet have the ability to use them for implicit or explicit conversions.
llvm-svn: 58860
operators. For example, one can now write "x + y" where x or y is a
class or enumeration type, and Clang will perform overload resolution
for "+" based on the overloaded operators it finds.
The other kinds of overloadable operators in C++ will follow this same
approach.
Three major issues remain:
1) We don't find member operators
2) Since we don't have user-defined conversion operators, we can't
call any of the built-in overloaded operators in C++ [over.built].
3) Once we've done the semantic checks, we drop the overloaded
operator on the floor; it doesn't get into the AST at all.
llvm-svn: 58821
operators in C++. Overloaded operators can be called directly via
their operator-function-ids, e.g., "operator+(foo, bar)", but we don't
yet implement the semantics of operator overloading to handle, e.g.,
"foo + bar".
llvm-svn: 58817
Implicit declaration of destructors (when necessary).
Extended Declarator to store information about parsed constructors
and destructors; this will be extended to deal with declarators that
name overloaded operators (e.g., "operator +") and user-defined
conversion operators (e.g., "operator int").
llvm-svn: 58767
duplication in the handling of copy-initialization by constructor,
which occurs both for initialization of a declaration and for
overloading. The initialization code is due for some refactoring.
llvm-svn: 58756
cope with the case where a user-defined conversion is actually a copy
construction, and therefore can be compared against other standard
conversion sequences. While I called this a hack before, now I'm
convinced that it's the right way to go.
Compare overloads based on derived-to-base conversions that invoke
copy constructors.
Suppress user-defined conversions when attempting to call a
user-defined conversion.
llvm-svn: 58629
when appropriate.
Conversions for class types now make use of copy constructors. I've
replaced the egregious hack allowing class-to-class conversions with a
slightly less egregious hack calling these conversions standard
conversions (for overloading reasons).
llvm-svn: 58622
conversions.
Notes:
- Overload resolution for converting constructors need to prohibit
user-defined conversions (hence, the test isn't -verify safe yet).
- We still use hacks for conversions from a class type to itself.
This will be the case until we start implicitly declaring the appropriate
special member functions. (That's next on my list)
llvm-svn: 58513
Notes:
- Constructors are never found by name lookup, so they'll never get
pushed into any scope. Instead, they are stored as an
OverloadedFunctionDecl in CXXRecordDecl for easy overloading.
- There's a new action isCurrentClassName that determines whether an
identifier is the name of the innermost class currently being defined;
we use this to identify the declarator-id grammar rule that refers to
a type-name.
- MinimalAction does *not* support parsing constructors.
- We now handle virtual and explicit function specifiers.
llvm-svn: 58499
ImplicitConversionSequence and, when doing so, following the specific
rules of [over.best.ics].
The computation of the implicit conversion sequences implements C++
[over.ics.ref], but we do not (yet) have ranking for implicit
conversion sequences that use reference binding.
llvm-svn: 58357
of copy initialization. Other pieces of the puzzle:
- Try/Perform-ImplicitConversion now handles implicit conversions
that don't involve references.
- Try/Perform-CopyInitialization uses
CheckSingleAssignmentConstraints for C. PerformCopyInitialization
is now used for all argument passing and returning values from a
function.
- Diagnose errors with declaring references and const values without
an initializer. (Uses a new Action callback, ActOnUninitializedDecl).
We do not yet have implicit conversion sequences for reference
binding, which means that we don't have any overloading support for
reference parameters yet.
llvm-svn: 58353
- CastExpr is the root of all casts
- ImplicitCastExpr is (still) used for all explicit casts
- ExplicitCastExpr is now the root of all *explicit* casts
- ExplicitCCastExpr (new name needed!?) is a C-style cast in C or C++
- CXXFunctionalCastExpr inherits from ExplicitCastExpr
- CXXNamedCastExpr inherits from ExplicitCastExpr and is the root of all
of the C++ named cast expression types (static_cast, dynamic_cast, etc.)
- Added classes CXXStaticCastExpr, CXXDynamicCastExpr,
CXXReinterpretCastExpr, and CXXConstCastExpr to
Also, fixed returned-stack-addr.cpp, which broke once when we fixed
reinterpret_cast to diagnose double->int* conversions and again when
we eliminated implicit conversions to reference types. The fix is in
both testcase and SemaChecking.cpp.
Most of this patch is simply support for the renaming. There's very
little actual change in semantics.
llvm-svn: 58264
conversions.
Added PerformImplicitConversion, which follows an implicit conversion sequence
computed by TryCopyInitialization and actually performs the implicit
conversions, including the extra check for ambiguity mentioned above.
llvm-svn: 58071
pointer-to-base. Also, add overload ranking for pointer conversions
(for both pointer-to-void and derived-to-base pointer conversions).
Note that we do not yet diagnose derived-to-base pointer conversion
errors that stem from ambiguous or inacessible base classes. These
aren't handled during overload resolution; rather, when the conversion
is actually used we go ahead and diagnose the error.
llvm-svn: 58017
conversions (e.g., comparing int* -> const int* against
int* -> const volatile int*); see C++ 13.3.3.2p3 bullet 3.
Add Sema::UnwrapSimilarPointerTypes to simplify the control flow of
IsQualificationConversion and CompareQualificationConversion (and fix
the handling of the int* -> volatile int* conversion in the former).
llvm-svn: 57978
Changes:
- Sema::IsQualificationConversion determines whether we have a qualification
conversion.
- Sema::CheckSingleAssignment constraints now follows the C++ rules in C++,
performing an implicit conversion from the right-hand side to the type of
the left-hand side rather than checking based on the C notion of
"compatibility". We now rely on the implicit-conversion code to
determine whether the conversion can happen or
not. Sema::TryCopyInitialization has an ugly reference-related
hack to cope with the initialization of references, for now.
- When building DeclRefExprs, strip away the reference type, since
there are no expressions whose type is a reference. We'll need to
do this throughout Sema.
- Expr::isLvalue now permits functions to be lvalues in C++ (but not
in C).
llvm-svn: 57935
Fix <rdar://problem/6265257> warnings for ambiguous message send swamp other warnings.
Reworked Sema::MatchTwoMethodDeclarations() to optionally match based on method size and alignment (the default in GCC). Changed Sema::LookupInstanceMethodInGlobalPool() to use this feature.
Added -Wno-struct-selector-match to driver, however didn't hook it up yet. Added a FIXME that says this.
llvm-svn: 57898
Note: One day, we should consider moving the actual diags to ObjCQualifiedIdTypesAreCompatible(), since it has more information on the actual problem. GCC currently emits slightly more instructive errors for some cases involving protocols. I added a FIXME to the code.
llvm-svn: 57529
- Follows the MSVC (original) implementation, including support of
pack(show) (useful for testing).
- Implements support for named pack records which gcc seems to
ignore (or implements incorrectly).
- Not currently wired to anything, only functionality change is the
type checking of the pragma.
llvm-svn: 57476
This is how this kind of initializers appear in the AST:
-The Init expression of the VarDecl is a functional type construction (of the VarDecl's type).
-The new VarDecl::hasCXXDirectInitializer() returns true.
e.g, for "int x(1);":
-VarDecl 'x' has Init with expression "int(1)" (CXXFunctionalCastExpr).
-hasCXXDirectInitializer() of VarDecl 'x' returns true.
A major benefit is that clients that don't particularly care about which exactly form was the initializer can handle both cases without special case code.
Note that codegening works now for "int x(1);" without any changes to CodeGen.
llvm-svn: 57178
Long standing bug in Sema::ActOnInstanceMessage(). We now warn when messaging an "id" with multiple method signatures in scope. The diags are a little verbose, however they can be streamlined if necessary.
llvm-svn: 56843
- readonly and readwrite are mutually exclusive.
- assign, copy, and retain are mutually exclusive.
- copy and retain are invalid on non-object types.
- Warn about using default 'assign' property on object types
(attempting to follow gcc behavior).
llvm-svn: 56507
(1) Additional arguments to variadic methods should have default
promotions applied.
(2) Additional arguments to non-variadic methods were allowed.
llvm-svn: 56084
- Replace string comparisons with pre-defined idents.
- Avoid calling isBuiltinObjCType() to avoid two checks.
- Remove isBuiltinObjCType(), since it was only used in Sema::MergeTypeDefDecl().
- Have Sema::MergeTypeDefDecl() set the new type.
This is a moidified version of an patch by David Chisnall.
llvm-svn: 55990
This change effects both RecordDecls and CXXRecordDecls, but does not effect EnumDecls (yet).
The motivation of this patch is as follows:
- Capture more source information, necessary for refactoring/rewriting clients.
- Pave the way to resolve ownership issues with RecordDecls with the forthcoming
addition of DeclGroups.
Current caveats:
- Until DeclGroups are in place, we will leak RecordDecls not explicitly
referenced by the AST. For example:
typedef struct { ... } x;
The RecordDecl for the struct will be leaked because the TypedefDecl doesn't
refer to it. This will be solved with DeclGroups.
- This patch also (temporarily) breaks CodeGen. More below.
High-level changes:
- As before, TagType still refers to a TagDecl, but it doesn't own it. When
a struct/union/class is first referenced, a RecordType and RecordDecl are
created for it, and the RecordType refers to that RecordDecl. Later, if
a new RecordDecl is created, the pointer to a RecordDecl in RecordType is
updated to point to the RecordDecl that defines the struct/union/class.
- TagDecl and RecordDecl now how a method 'getDefinition()' to return the
TagDecl*/RecordDecl* that refers to the TagDecl* that defines a particular
enum/struct/class/union. This is useful from going from a RecordDecl* that
defines a forward declaration to the RecordDecl* that provides the actual
definition. Note that this also works for EnumDecls, except that in this case
there is no distinction between forward declarations and definitions (yet).
- Clients should no longer assume that 'isDefinition()' returns true from a
RecordDecl if the corresponding struct/union/class has been defined.
isDefinition() only returns true if a particular RecordDecl is the defining
Decl. Use 'getDefinition()' instead to determine if a struct has been defined.
- The main changes to Sema happen in ActOnTag. To make the changes more
incremental, I split off the processing of enums and structs et al into two
code paths. Enums use the original code path (which is in ActOnTag) and
structs use the ActOnTagStruct. Eventually the two code paths will be merged,
but the idea was to preserve the original logic both for comparison and not to
change the logic for both enums and structs all at once.
- There is NO CHAINING of RecordDecls for the same RecordType. All RecordDecls
that correspond to the same type simply have a pointer to that type. If we
need to figure out what are all the RecordDecls for a given type we can build
a backmap.
- The diff in CXXRecordDecl.[cpp,h] is actually very small; it just mimics the
changes to RecordDecl. For some reason 'svn' marks the entire file as changed.
Why is CodeGen broken:
- Codegen assumes that there is an equivalence between RecordDecl* and
RecordType*. This was true before because we only created one RecordDecl* for
a given RecordType*, but it is no longer true. I believe this shouldn't be too
hard to change, but the patch was big enough as it is.
I have tested this patch on both the clang test suite, and by running the static analyzer over Postgresql and a large Apple-internal project (mix of Objective-C and C).
llvm-svn: 55839
-The Parser calls a new "ActOnCXXTypeConstructExpr" action.
-Sema, depending on the type and expressions number:
-If the type is a class, it will treat it as a class constructor. [TODO]
-If there's only one expression (i.e. "int(0.5)" ), creates a new "CXXFunctionalCastExpr" Expr node
-If there are no expressions (i.e "int()" ), creates a new "CXXZeroInitValueExpr" Expr node.
llvm-svn: 55177
- UsualUnaryConversions takes an Expr *& and may modify its argument,
this broke when it was refactored into Sema::CheckCastTypes. This
meant that we were missing implicit casts in some places.
- Seems pretty sad that this got through our tests.
llvm-svn: 55039
- Added as private members for each because it is not clear where to
put the common definition. Perhaps the IdentifierInfos all of these
"pseudo-keywords" should be collected into one place (this would
KnownFunctionIDs and Objective-C property IDs, for example).
Remove Token::isNamedIdentifier.
- There isn't a good reason to use strcmp when we have interned
strings, and there isn't a good reason to encourage clients to do
so.
llvm-svn: 54794
- Drop {Decl.h,DeclObjC.h,IdentifierTable.h} from Expr.h
- Moved Sema::getCurMethodDecl() out of line (dependent on
ObjCMethodDecl via dyn_cast).
llvm-svn: 54629
- Move checking from MergeVarDecl->FinializeDeclaratorGroup. Since MergeVarDecl is called before the initializer is attacted, it can't be done there (this removes a long standing FIXME).
- Add Sema::isTentativeDefinition() and Sema::CheckForFileScopedRedefinitions().
- Remove FIXME's and touch-up test case.
Still some more work to do (forthcoming)...
llvm-svn: 54533
- ActOnDeclarator now takes an additional parameter which is the
AsmLabel if used. Its unfortunate that this bubbles up this high,
but we cannot just lump it in as an attribute without mistakenly
*accepting* it as an attribute.
- The actual asm-label itself is, however, encoded as an AsmLabelAttr
on the FunctionDecl.
- Slightly improved parser error recovery on malformed asm-labels.
- CodeGen support still missing...
llvm-svn: 54339
of a specific smallvector size.
Fix protocol lists to pass down proper location info, so we get diagnostics
like this:
t.m:3:35: error: cannot find protocol definition for 'NSCopying', referenced by 'NSWhatever'
@interface NSWhatever : NSObject <NSCopying>
^
instead of this:
t.m:3:44: error: cannot find protocol definition for 'NSCopying', referenced by 'NSWhatever'
@interface NSWhatever : NSObject <NSCopying>
^
Add a new IdentifierLocPair typedef which is just a pair<IdentifierInfo*, SourceLocation>
llvm-svn: 53883
Add some code to handle vector comparisons, which is the language side
of the llvm vicmp/vfcmp instructions. Also make the vector-vector and
vector-scalar asign checks a bit more sane under the presence of lax vector
conversions.
llvm-svn: 53565
decl attributes out of the various places they can hide. This makes
us correctly reject things like this:
t.c:2:22: error: mode attribute only supported for integer and floating-point types
int **__attribute((mode(HI)))* i32;
^
because you can't make a pointer be HImode.
llvm-svn: 52876
to work list the rest of the attr handlers. Also, rename
it to HandleVectorSizeAttribute to match its attr name.
No functionality change.
llvm-svn: 52872
the single attribute they look at by reference instead of by pointer.
This is a subtle indicator that they take the specified attribute, not
a whole list of them.
This also make HandleExtVectorTypeAttribute work the same way as the rest
of the attributes, adds some comments etc. No functionality change.
llvm-svn: 52871
used to mutate the attribute list for declspecs when the type was
converted, breaking the case where one declspec was shared by multiple
declarators.
This fixes rdar://6032532.
llvm-svn: 52769
Note that Parser::ParseCXXMemberSpecification is temporarily disabled until the Sema support is in place.
Once ParseCXXMemberSpecification is enabled, the Parser/cxx-class.cpp test will pass.
llvm-svn: 52694
moves the check for the invalid construct to a point where it doesn't
affect other uses of isIntegerConstantExpr, and we can warn properly
when the extension is used. This makes it a bit more complicated, but
it's a lot cleaner.
Steve, please tell me if this check is sufficient to handle the
relevant system header. I know it's enough to handle the testcase, but
I don't know what exactly the original looks like.
llvm-svn: 51918
it fixes PR2204. Not too much to say about the implementation; it works
in a similar way to the vector size attribute.
At some point, we need to modify the targets to provide information
about the appropriate types.
llvm-svn: 51577
in Sema, per discussion on mailing list. This doesn't cause any changes
in the test results. I'll probably add some more tests at some point,
but it's an open question what we need to accept to be compatible with
real code.
This doesn't touch the existing isConstantExpr method on Expr; that
should be addressed somehow eventually (either removed or refined to
whatever is appropriate).
llvm-svn: 51318
expressing the full flexibility of the LLVM shufflevector instruction.
The expected immediate usage is in *mmintrin.h, so that they don't
depend on the mess of gcc-inherited (and not completely implemented)
shuffle builtins.
llvm-svn: 51113
NOTE: This work is incomplete and still fails many tests (as a result, it isn't enabled yet). Nevertheless, I wanted to check it in so I can work on it from home.
llvm-svn: 50544
-NamespaceDecl for the AST
-Checks for name clashes between namespaces and tag/normal declarations.
This commit doesn't implement proper name lookup for namespaces.
llvm-svn: 50321
DeclContext *CtxDecl -> DeclContext *DeclCtx
DeclContext *CD -> DeclContext *DC
It makes the code more consistent."
Patch by Zhongxing Xu!
llvm-svn: 50105
inheritance in C++. It'll parse the base-specifier list, e.g.,
class D : public B1, virtual public B2 { };
and do some of the simpler semantic checks (B1 and B2 are classes;
they aren't unions or incomplete types, etc).
llvm-svn: 49623
1) objc ivar processing is split out of ActOnField into its own ActOnIvar method.
2) the new objc ivar action takes visibility info directly, eliminating
AllVisibilities in ParseObjCClassInstanceVariables.
llvm-svn: 49506
While it is similar to the other compatibility predicates in ASTContext,
it is not used by them and is different.
In addition, greatly simplify ObjCQualifiedIdTypesAreCompatible and
fix some canonical type bugs. Also, simplify my Type::getAsObjC* methods.
llvm-svn: 49313
-Added ContextDecl (no TranslationUnitDecl)
-ScopedDecl class has a ContextDecl member
-FieldDecl class has a ContextDecl member, so that a Field or a ObjCIvar can be traced back to their RecordDecl/ObjCInterfaceDecl easily
-FunctionDecl, ObjCMethodDecl, TagDecl, ObjCInterfaceDecl inherit from ContextDecl. With TagDecl as ContextDecl, enum constants have a EnumDecl as their context.
-Moved Decl class to a "DeclBase.h" along with ContextDecl class
-CurContext is handled by Sema
llvm-svn: 49208
I also finished unifying access to scope decl change by converting Sema::getObjCInterfaceDecl() to use Sema::LookupDecl(). This is much cleaner now:-)
llvm-svn: 49107
(1) Remove IdLoc (it's never used).
(2) Add a bool to enable/disable lazy builtin creaation (defaults to true).
This enables us to use LookupDecl() in Sema::isTypeName(), which is also part of this commit.
To make this work, I changed isTypeName() to be a non-const member function. I'm not happy with this, however I fiddled with making LookupDecl() and friends const and it got ugly pretty quickly. We can certainly add it back if/when someone has time to fiddle with it. For now, I thought this simplification was more important than retaining the const-ness.
llvm-svn: 49087
- Added a DenseMap to associate an IdentifierInfo with the ObjCCompatibleAliasDecl.
- Renamed LookupScopedDecl->LookupDecl and changed it's return type to Decl. Also added lookup for ObjCCompatibleAliasDecl's.
- Removed Sema::LookupInterfaceDecl(). Converted clients to used LookupDecl().
- Some minor indentation changes.
Will deal with ObjCInterfaceDecl and getObjCInterfaceDecl() in a separate commit...
llvm-svn: 49058
lib dir and move all the libraries into it. This follows the main
llvm tree, and allows the libraries to be built in parallel. The
top level now enforces that all the libs are built before Driver,
but we don't care what order the libs are built in. This speeds
up parallel builds, particularly incremental ones.
llvm-svn: 48402
Argyrios Kyrtzidis