Summary:
This patch adds FileSP and SBFile versions of the API methods
ReportEventState and HandleProcessEvent. It points the SWIG
wrappers at these instead of the ones that use FILE* streams.
Reviewers: JDevlieghere, jasonmolenda, labath, jingham
Reviewed By: labath
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D68546
llvm-svn: 374816
Summary:
There a a few call sites that use FILE* which are easy to
fix without disrupting anything else.
Reviewers: JDevlieghere, jasonmolenda, labath
Reviewed By: JDevlieghere, labath
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D68444
llvm-svn: 374239
LLDB's signal handlers call SBDebugger methods, which themselves try to
be really careful about not doing anything non-signal safe. The
Reproducer record macro is not careful though, and does unsafe things
which potentially caused LLDB to crash. Given that these methods are not
particularly interesting I've swapped the RECORD macros with DUMMY ones,
so that we still register the API boundary but don't do anything
non-signal safe.
Thanks Jim for figuring this one out!
llvm-svn: 374104
Summary:
This patch factors out File as an abstract base
class and moves most of its actual functionality into
a subclass called NativeFile. In the next patch,
I'm going to be adding subclasses of File that
don't necessarily have any connection to actual OS files,
so they will not inherit from NativeFile.
This patch was split out as a prerequisite for
https://reviews.llvm.org/D68188
Reviewers: JDevlieghere, jasonmolenda, labath
Reviewed By: labath
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D68317
llvm-svn: 373564
Summary:
Add new methods to SBDebugger to set IO files as SBFiles instead of
as FILE* streams.
In future commits, the FILE* methods will be deprecated and these
will become the primary way to set the debugger I/O streams.
Reviewers: JDevlieghere, jasonmolenda, labath
Reviewed By: labath
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D68181
llvm-svn: 373563
Summary:
This patch removes File::SetStream() and File::SetDescriptor(),
and replaces most direct uses of File with pointers to File.
Instead of calling SetStream() on a file, we make a new file and
replace it.
My ultimate goal here is to introduce a new API class SBFile, which
has full support for python io.IOStream file objects. These can
redirect read() and write() to python code, so lldb::Files will
need a way to dispatch those methods. Additionally it will need some
form of sharing and assigning files, as a SBFile will be passed in and
assigned to the main IO streams of the debugger.
In my prototype patch queue, I make File itself copyable and add a
secondary class FileOps to manage the sharing and dispatch. In that
case SBFile was a unique_ptr<File>.
(here: https://github.com/smoofra/llvm-project/tree/files)
However in review, Pavel Labath suggested that it be shared_ptr instead.
(here: https://reviews.llvm.org/D67793)
In order for SBFile to use shared_ptr<File>, everything else should
as well.
If this patch is accepted, I will make SBFile use a shared_ptr
I will remove FileOps from future patches and use subclasses of File
instead.
Reviewers: JDevlieghere, jasonmolenda, zturner, jingham, labath
Reviewed By: labath
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D67891
llvm-svn: 373090
This just moves the CommandLoader utility into the reproducer namespace
and makes it accessible outside the API layer. This is setting things up
for a bigger change.
llvm-svn: 371689
Summary:
The gui command requires curses support, which can be disabled at
compile time. This patch adds the ability to detect this situation in
the test suite and skip the test accordingly.
Reviewers: teemperor, jankratochvil
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D67073
llvm-svn: 370658
Now that we've moved to C++14, we no longer need the llvm::make_unique
implementation from STLExtras.h. This patch is a mechanical replacement
of (hopefully) all the llvm::make_unique instances across the monorepo.
Differential revision: https://reviews.llvm.org/D66259
llvm-svn: 368933
This patch replaces explicit calls to log::Printf with the new LLDB_LOGF
macro. The macro is similar to LLDB_LOG but supports printf-style format
strings, instead of formatv-style format strings.
So instead of writing:
if (log)
log->Printf("%s\n", str);
You'd write:
LLDB_LOG(log, "%s\n", str);
This change was done mechanically with the command below. I replaced the
spurious if-checks with vim, since I know how to do multi-line
replacements with it.
find . -type f -name '*.cpp' -exec \
sed -i '' -E 's/log->Printf\(/LLDB_LOGF\(log, /g' "{}" +
Differential revision: https://reviews.llvm.org/D65128
llvm-svn: 366936
Before this patch, reproducers weren't relocatable. The reproducer
contained hard coded paths in the VFS mapping, as well in the yaml file
listing the different input files for the command interpreter. This
patch changes that:
- Use relative paths for the DataCollector.
- Use an overlay prefix for the FileCollector.
Differential revision: https://reviews.llvm.org/D63467
llvm-svn: 363697
This replaces the `info` typedef with a nested struct named Info. This
means we now have FooProvider and FooProvider::Info, instead of two
related but separate classes FooProvider and FooInfo. This change is
mostly cosmetic.
llvm-svn: 363211
For some reason I had convinced myself that functions returning by
pointer or reference do not require recording their result. However,
after further considering I don't see how that could work, at least not
with the current implementation. Interestingly enough, the reproducer
instrumentation already (mostly) accounts for this, though the
lldb-instr tool did not.
This patch adds the missing macros and updates the lldb-instr tool.
Differential revision: https://reviews.llvm.org/D60178
llvm-svn: 357639
Move SBRegistry method registrations from SBReproducer.cpp into files
declaring the individual APIs, in order to reduce the memory consumption
during build and improve maintainability. The current humongous
SBRegistry constructor exhausts all memory on a NetBSD system with 4G
RAM + 4G swap, therefore making it impossible to build LLDB.
Differential Revision: https://reviews.llvm.org/D59427
llvm-svn: 356481
Changing the type in the DUMMY macro to void* doesn't actually fix the
build error, because the argument type is deducted from the template (as
opposed to when serializing through the instrumentation framework, where
this would matter). Instead I've added a proper instance of log_append
that takes function pointers and logs their address.
llvm-svn: 355863
Callbacks in the LLDB_RECORD_DUMMY macros were causing build failures
with the Xcode project. This patch replaces the function pointers with
void pointers so they can be logged.
llvm-svn: 355842
Summary:
Our python version of the SB API has (the python equivalent of)
operator bool, but the C++ version doesn't.
This is because our python operators are added by modify-python-lldb.py,
which performs postprocessing on the swig-generated interface files.
In this patch, I add the "operator bool" to all SB classes which have an
IsValid method (which is the same logic used by modify-python-lldb.py).
This way, we make the two interfaces more constent, and it allows us to
rely on swig's automatic syntesis of python __nonzero__ methods instead
of doing manual fixups.
Reviewers: zturner, jingham, clayborg, jfb, serge-sans-paille
Subscribers: jdoerfert, lldb-commits
Differential Revision: https://reviews.llvm.org/D58792
llvm-svn: 355824
The current record macros already log the function being called. This
patch extends the macros to also log their input arguments and removes
explicit logging from the SB API.
This might degrade the amount of information in some cases (because of
smarter casts or efforts to log return values). However I think this is
outweighed by the increased coverage and consistency. Furthermore, using
the reproducer infrastructure, diagnosing bugs in the API layer should
become much easier compared to relying on log messages.
Differential revision: https://reviews.llvm.org/D59101
llvm-svn: 355649
This patch adds the SBReproducer macros needed to capture and reply the
corresponding calls. This patch was generated by running the lldb-instr
tool on the API source files.
Differential revision: https://reviews.llvm.org/D57475
llvm-svn: 355459
This patch adds the necessary logic to capture and replay commands
entered into the command interpreter. A DataRecorder shadows the input
and writes its data to a know file. During replay this file is used as
the command interpreter's input.
It's possible to the command interpreter more than once, with a
different input source. We support this scenario by using multiple
buffers. The synchronization for this takes place at the SB layer, where
we create a new recorder every time the debugger input is changed.
During replay we use the corresponding buffer as input.
Differential revision: https://reviews.llvm.org/D58564
llvm-svn: 355249
As per the discussion on the mailing list:
http://lists.llvm.org/pipermail/lldb-commits/Week-of-Mon-20190218/048007.html
This commit implements option (3):
> Go back to initializing the reproducer before the rest of the debugger.
> The method wouldn't be instrumented and guarantee no other SB methods are
> called or SB objects are constructed. The initialization then becomes part
> of the replay.
Differential revision: https://reviews.llvm.org/D58410
llvm-svn: 354631
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
This patch changes the way the reproducer is initialized. Rather than
making changes at run time we now do everything at initialization time.
To make this happen we had to introduce initializer options and their SB
variant. This allows us to tell the initializer that we're running in
reproducer capture/replay mode.
Because of this change we also had to alter our testing strategy. We
cannot reinitialize LLDB when using the dotest infrastructure. Instead
we use lit and invoke two instances of the driver.
Another consequence is that we can no longer enable capture or replay
through commands. This was bound to go away form the beginning, but I
had something in mind where you could enable/disable specific providers.
However this seems like it adds very little value right now so the
corresponding commands were removed.
Finally this change also means you now have to control this through the
driver, for which I replaced --reproducer with --capture and --replay to
differentiate between the two modes.
Differential revision: https://reviews.llvm.org/D55038
llvm-svn: 348152
When I landed the initial reproducer framework I knew there were some
things that needed improvement. Rather than bundling it with a patch
that adds more functionality I split it off into this patch. I also
think the API is stable enough to add unit testing, which is included in
this patch as well.
Other improvements include:
- Refactor how we initialize the loader and generator.
- Improve naming consistency: capture and replay seems the least ambiguous.
- Index providers by name and make sure there's only one of each.
- Add convenience methods for creating and accessing providers.
Differential revision: https://reviews.llvm.org/D54616
llvm-svn: 347716
This patch removes the comments grouping header includes. They were
added after running IWYU over the LLDB codebase. However they add little
value, are often outdates and burdensome to maintain.
llvm-svn: 346626
This patch removes the logic for resolving paths out of FileSpec and
updates call sites to rely on the FileSystem class instead.
Differential revision: https://reviews.llvm.org/D53915
llvm-svn: 345890
This patch removes the Exists method from FileSpec and updates its uses
with calls to the FileSystem.
Differential revision: https://reviews.llvm.org/D53845
llvm-svn: 345854
This is an NFC commit to refactor the "load dependent files" parameter
from a boolean to an enum value. We want to be able to specify a
default, in which case we decide whether or not to load the dependent
files based on whether the target is an executable or not (i.e. a
dylib).
This is a dependency for D51934.
Differential revision: https://reviews.llvm.org/D51859
llvm-svn: 342633
These three classes have no external dependencies, but they are used
from various low-level APIs. Moving them down to Utility improves
overall code layering (although it still does not break any particular
dependency completely).
The XCode project will need to be updated after this change.
Differential Revision: https://reviews.llvm.org/D49740
llvm-svn: 339127
Summary:
To successfully open a core file, we need to have LLVM built with
support for the relevant target. Right now, if one does not have the
appropriate targets configured, the tests will fail.
This patch uses the GetBuildConfiguration SB API to inform the test (and
anyone else who cares) about the list of supported LLVM targets. The
test then uses this information to approriately skip the tests.
Reviewers: clayborg, jingham
Subscribers: martong, lldb-commits
Differential Revision: https://reviews.llvm.org/D48641
llvm-svn: 335859
Summary:
It seems to me that files in include/lldb/API/ are headers that should
be exposed to liblldb users. Because SystemInitializerFull.h exposes details of
lldb_private, I think having it there is not the right thing to do. Since it's
only included from files in source/API, we should move it there and treat it as
private.
Reviewers: labath, clayborg
Reviewed By: labath, clayborg
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D47342
llvm-svn: 333304
This is intended as a clean up after the big clang-format commit
(r280751), which unfortunately resulted in many of the comment
paragraphs in LLDB being very hard to read.
FYI, the script I used was:
import textwrap
import commands
import os
import sys
import re
tmp = "%s.tmp"%sys.argv[1]
out = open(tmp, "w+")
with open(sys.argv[1], "r") as f:
header = ""
text = ""
comment = re.compile(r'^( *//) ([^ ].*)$')
special = re.compile(r'^((([A-Z]+[: ])|([0-9]+ )).*)|(.*;)$')
for line in f:
match = comment.match(line)
if match and not special.match(match.group(2)):
# skip intentionally short comments.
if not text and len(match.group(2)) < 40:
out.write(line)
continue
if text:
text += " " + match.group(2)
else:
header = match.group(1)
text = match.group(2)
continue
if text:
filled = textwrap.wrap(text, width=(78-len(header)),
break_long_words=False)
for l in filled:
out.write(header+" "+l+'\n')
text = ""
out.write(line)
os.rename(tmp, sys.argv[1])
Differential Revision: https://reviews.llvm.org/D46144
llvm-svn: 331197
Summary:
The Args class is used in plenty of places besides the command
interpreter (e.g., anything requiring an argc+argv combo, such as when
launching a process), so it needs to be in a lower layer. Now that the
class has no external dependencies, it can be moved down to the Utility
module.
This removes the last (direct) dependency from the Host module to
Interpreter, so I remove the Interpreter module from Host's dependency
list.
Reviewers: zturner, jingham, davide
Subscribers: mgorny, lldb-commits
Differential Revision: https://reviews.llvm.org/D45480
llvm-svn: 330200
Summary:
The idea behind this is to move the functionality which depend on other lldb
classes into a separate class. This way, the Args class can be turned
into a lightweight arc+argv wrapper and moved into the lower lldb
layers.
Reviewers: jingham, zturner
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D44306
llvm-svn: 329677
Summary:
This adds a SBDebugger::GetBuildConfiguration static function, which
returns a SBStructuredData describing the the build parameters of
liblldb. Right now, it just contains one entry: whether we were built
with XML support.
I use the new functionality to skip a test which requires XML support,
but concievably the new function could be useful to other liblldb
clients as well (making sure the library supports the feature they are
about to use).
Reviewers: zturner, jingham, clayborg, davide
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D43333
llvm-svn: 325504
SetOututFileHandle to work with IOBase.
I did make one change after checking with Larry --
I renamed SBDebugger::Flush to FlushDebuggerOutputHandles
and added a short docstring to the .i file to make it
a little clearer under which context programs may need
to use this API.
Differential Revision: https://reviews.llvm.org/D39128
<rdar://problem/34870417>
llvm-svn: 317182
SetOututFileHandle to work with IOBase.
I did make one change after checking with Larry --
I renamed SBDebugger::Flush to FlushDebuggerOutputHandles
and added a short docstring to the .i file to make it
a little clearer under which context programs may need
to use this API.
Differential Revision: https://reviews.llvm.org/D38829
llvm-svn: 317180
Summary:
ArchSpec::SetTriple was taking a Platform as an argument, and used it to
fill in missing pieces of the specified triple. I invert the dependency
by moving this code to other classes. For this purpose, I've created
three new functions.
- HostInfo::GetAugmentedArchSpec: fills in the triple using the host
platform (this used to be implemented by passing a null platform
pointer). By putting this code in the Host module, we can provide a
way to anyone who does not have a platform instance (lldb-server) an
easy way to get Host data.
- Platform::GetAugmentedArchSpec: if you have a platform instance, you
can call this to let it fill in the triple.
- static Platform::GetAugmentedArchSpec: implements the "if platform ==
0 then use_host() else use_platform()" part.
Reviewers: zturner, jingham, clayborg
Subscribers: mgorny, javed.absar, lldb-commits
Differential Revision: https://reviews.llvm.org/D39387
llvm-svn: 316987
This patch adds support for passing an arbitrary python stream
(anything inheriting from IOBase) to SetOutputFileHandle or
SetErrorFileHandle.
Differential revision: https://reviews.llvm.org/D38829
<rdar://problem/34870417>
llvm-svn: 315966
When introduced, breakpoint names were just tags that you could
apply to breakpoints that would allow you to refer to a breakpoint
when you couldn't capture the ID, or to refer to a collection of
breakpoints.
This change makes the names independent holders of breakpoint options
that you can then apply to breakpoints when you add the name to the
breakpoint. It adds the "breakpoint name configure" command to set
up or reconfigure breakpoint names. There is also full support for
then in the SB API, including a new SBBreakpointName class.
The connection between the name and the breakpoints
sharing the name remains live, so if you reconfigure the name, all the
breakpoint options all change as well. This allows a quick way
to share complex breakpoint behavior among a bunch of breakpoints, and
a convenient way to iterate on the set.
You can also create a name from a breakpoint, allowing a quick way
to copy options from one breakpoint to another.
I also added the ability to make hidden and delete/disable protected
names. When applied to a breakpoint, you will only be able to list,
delete or disable that breakpoint if you refer to it explicitly by ID.
This feature will allow GUI's that need to use breakpoints for their
own purposes to keep their breakpoints from getting accidentally
disabled or deleted.
<rdar://problem/22094452>
llvm-svn: 313292
Lawrence D'Anna