This was requested in the review of D57006.
Also add missing quotes around symbol names in error messages.
Differential Revision: https://reviews.llvm.org/D57014
llvm-svn: 351799
In r287786, the behaviour of --dyn-symbols in llvm-readelf (but not
llvm-readobj) was changed to print the dynamic symbols as derived from
the hash table, rather than to print the dynamic symbol table contents
directly. The original change was initially submitted without review,
and some comments were made on the commit mailing list implying that the
new behavious is GNU compatible. I argue that it is not:
1) It does not include a null symbol.
2) It prints the symbols based on an order derived from the hash
table.
3) It prints an extra column indicating which bucket it came from.
This could break parsers that expect a fixed number of columns,
with the first column being the symbol index.
4) If the input happens to have both .hash and .gnu.hash section, it
prints interpretations of them both, resulting in most symbols
being printed twice.
5) There is no way of just printing the raw dynamic symbol table,
because --symbols also prints the static symbol table.
This patch reverts the --dyn-symbols behaviour back to its old behaviour
of just printing the contents of the dynamic symbol table, similar to
what is printed by --symbols. As the hashed interpretation is still
desirable to validate the hash table, it puts it under a new switch
"--hash-symbols". This is a no-op on all output forms except for GNU
output style for ELF. If there is no hash table, it does nothing,
unlike the previous behaviour which printed the raw dynamic symbol
table, since the raw dynsym is available under --dyn-symbols.
The yaml input for the test is based on that in
test/tools/llvm-readobj/demangle.test, but stripped down to the bare
minimum to provide a valid dynamic symbol.
Note: some LLD tests needed updating. I will commit a separate patch for
those.
Reviewed by: grimar, rupprecht
Differential Revision: https://reviews.llvm.org/D56910
llvm-svn: 351789
D56777 added +1cy local forwarding penalty for horizontal operations, but this penalty only affects sse2/xmm variants, the mmx variants don't suffer the penalty.
Confirmed with @andreadb
llvm-svn: 351755
r327630 introduced new write definitions for float/vector loads.
Before that revision, WriteLoad was used by both integer/float (scalar/vector)
load. So, WriteLoad had to conservatively declare a latency to 5cy. That is
because the load-to-use latency for float/vector load is 5cy.
Now that we have dedicated writes for float/vector loads, there is no reason why
we should keep the latency of WriteLoad to 5cy. At the moment, WriteLoad is only
used by scalar integer loads only; we can assume an optimstic 3cy latency for
them.
This patch changes that latency from 5cy to 3cy, and regenerates the affected
scheduling/mca tests.
Differential Revision: https://reviews.llvm.org/D56922
llvm-svn: 351742
The debug directory contains the rwa file address of itself,
which is updated on write. Add a testcase for this existing
functionality.
Differential Revision: https://reviews.llvm.org/D56876
llvm-svn: 351659
This patch gives elfabi the ability to read DT_NEEDED entries from ELF binaries
to populate NeededLibs in TextAPI's ELFStub.
Differential Revision: https://reviews.llvm.org/D55852
llvm-svn: 351592
Set the test to properly require aarch64 instead of arm. Otherwise, this test fails with LLVM_TARGETS_TO_BUILD='ARM;X86'
bin/llvm-mc: : error: unable to get target for 'arm64-apple-ios7.0.0'
Committed on behalf of @easyaspi314 (Devin)
Differential Revision: https://reviews.llvm.org/D56472
llvm-svn: 351560
When -all-headers is given it is supposed to dump all headers,
but now it skips the archive headers for no reason.
The patch fixes that.
Differential revision: https://reviews.llvm.org/D56780
llvm-svn: 351547
Summary:
objdump was interpreting the function header containing the locals
declaration as instructions. To parse these without injecting target
specific code in objdump, MCDisassembler::onSymbolStart was added to
be implemented by the WebAssembly implemention.
WasmObjectFile now returns a code offset for the "address" of a symbol,
rather than the index. This is also more in-line with what other
targets do.
Also ensured that the AsmParser correctly puts each function
in its own segment to enable this test case.
Reviewers: sbc100, dschuff
Subscribers: jgravelle-google, aheejin, sunfish, rupprecht, llvm-commits
Differential Revision: https://reviews.llvm.org/D56684
llvm-svn: 351460
This change adds demangling support to the ELF side of llvm-readobj,
under the switch --demangle/-C.
The following places are demangled: symbol table dumps (static and
dynamic), relocation dumps (static and dynamic), addrsig dumps, call
graph profile dumps, and group section signature symbols.
Although GNU readelf doesn't support demangling, it is still a useful
feature to have, and brings it on a par with llvm-objdump's
capabilities.
This fixes https://bugs.llvm.org/show_bug.cgi?id=40054.
Reviewed by: grimar, rupprecht
Differential Revision: https://reviews.llvm.org/D56791
llvm-svn: 351450
On Jaguar, horizontal adds/subs have local forwarding disable.
That means, we pay a compulsory extra cycle of write-back stage, and the value
is not available until the end of that stage.
This patch changes the latency of horizontal operations by adding an extra
cycle. With this patch, latency numbers now match what is reported by perf.
I plan to send another patch to also 'fix' the latency of shuffle operations (on
Jaguar, local forwarding is disabled for vector shuffles too).
Differential Revision: https://reviews.llvm.org/D56777
llvm-svn: 351366
This change gives the llvm-elfabi tool the ability to read DT_SONAME from a binary ELF file into an ELFStub.
Added:
- DynamicEntries struct for storing dynamic entries that are relevant to elfabi.
- terminatedSubstr() retrieves a null-terminated substring from a StringRef.
- appendToError() appends a string to an error, allowing more specific error messages.
Differential Revision: https://reviews.llvm.org/D55629
llvm-svn: 351361
Summary:
When llvm-nm is passed only the --size-sort option for an object file, there is no output generated.
The commit modifies the behavior to print the symbols sorted and their size which is also inline with
the output of the GNU nm tool.
Signed-off-by: Saurabh Badhwar <sbsaurabhbadhwar9@gmail.com>
Reviewers: enderby, rupprecht
Reviewed By: rupprecht
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D56063
llvm-svn: 351347
This allows avoiding conflicts between paths that begin with the same
chars as some llvm-rc options (which can be used with either slashes
or dashes).
Differential Revision: https://reviews.llvm.org/D56743
llvm-svn: 351305
Summary:
When running llvm-objdump with the -macho option objdump will by default
disassemble only the __TEXT,__text section (or __TEXT_EXEC,__text when
disassembling MH_KEXT_BUNDLE files). The -disassemble-all option is
treated no diferently than -disassemble.
This change upates llvm-objdump's MachO parsing code to disassemble all
__text sections found in a file when -disassemble-all is specified. This
is useful for disassembling files with more than one __text section, or
when disassembling files whose __text section is not present in __TEXT.
I added a lit test case that verifies "llvm-objdump -m -d" and
"llvm-objdump -m -D" produce the expected results on a reference binary.
I also updated the CommandGuide documentation for llvm-objdump.rst and
verified it renders correctly as man and html.
rdar://42899338
Reviewers: ab, pete, lhames
Reviewed By: lhames
Subscribers: rupprecht, llvm-commits
Differential Revision: https://reviews.llvm.org/D56649
llvm-svn: 351238
Summary:
This patch adds support for merged arguments (e.g. -SW == -S -W) for llvm-readelf.
No changes are intended for llvm-readobj. There are a few short flags (-sd, -sr, -st, -dt) that would conflict with grouped single letter flags, and having only some grouped flags might be confusing. So, allow merged flags for readelf compatibility, but force separate args for llvm-readobj. From what I can tell, these two-letter flags are only used with llvm-readobj, not llvm-readelf.
This fixes PR40064.
Reviewers: jhenderson, kristina, echristo, phosek
Reviewed By: jhenderson
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D56629
llvm-svn: 351205
Summary:
Fix llvm-objcopy to add .note sections as SHT_NOTEs. GNU objcopy overrides section flags for special sections. For `.note` sections (with the exception of `.note.GNU-stack`), SHT_NOTE is used.
Many other sections are special cased by libbfd, but `.note` is the only special section I can seem to find being used with objcopy --add-section.
See `.note` in context of the full list of special sections here: https://sourceware.org/git/gitweb.cgi?p=binutils-gdb.git;a=blob;f=bfd/elf.c;h=eb3e1828e9c651678b95a1dcbc3b124783d1d2be;hb=HEAD#l2675
Reviewers: jhenderson, alexshap, jakehehrlich, espindola
Reviewed By: jhenderson
Subscribers: emaste, arichardson, llvm-commits
Differential Revision: https://reviews.llvm.org/D56570
llvm-svn: 351204
compiler identification lines in test-cases.
(Doing so only because it's then easier to search for references which
are actually important and need fixing.)
llvm-svn: 351200
Summary:
Normal behavior for GNU ar is to flatten thin archives when adding them to another thin archive, i.e. add the members directly instead of nesting the archive.
Some refactoring done as part of this patch to ease things:
- Consolidate `addMember`/`addLibMember` methods
- Rename `addMember` to `addChildMember` to make it more visibly different at the call site that an archive child is passed instead of a regular member
- Pass in a separate vector and splice it back into position instead of passing a vector + optional Pos (which makes expanding libs tricky)
This fixes PR37530 as raised by https://github.com/ClangBuiltLinux/linux/issues/279.
Reviewers: mstorsjo, pcc, ruiu
Reviewed By: mstorsjo
Subscribers: llvm-commits, tpimh, nickdesaulniers
Differential Revision: https://reviews.llvm.org/D56508
llvm-svn: 351120
Summary:
As pointed out in D53667, our use of hyphens in flags can be inconsistent, mixing `-` with `--`. This change makes all long style flags use `--`.
Automatically changed via:
```
find test/tools/llvm-objcopy/ELF -type f | xargs sed -i 's/ -\([a-zA-Z]\{3\}\)/ --\1/g'
```
Two false positives were manually fixed/reverted.
Reviewers: jhenderson, espindola, alexshap
Reviewed By: jhenderson
Subscribers: emaste, javed.absar, arichardson, fedor.sergeev, jakehehrlich, llvm-commits
Differential Revision: https://reviews.llvm.org/D56513
llvm-svn: 350944
Previously, this was broken - by setting PointerToSymbolTable to zero
but still actually writing the string table length, the object file
header was corrupted.
Differential Revision: https://reviews.llvm.org/D56584
llvm-svn: 350926
In an assert build, the Error gets destroyed and we get "Program aborted
due to an unhandled Error:".
In release, we get an empty message.
llvm-svn: 350848
This is https://bugs.llvm.org/show_bug.cgi?id=26892,
GNU objdump hides the special symbol entry:
SYMBOL TABLE:
000000000000a7e0 l F .text 00000000000003f9 bi_copymodules
while llvm-objdump does not:
SYMBOL TABLE:
0000000000000000 *UND* 00000000
000000000000a7e0 l F .text 000003f9 bi_copymodules
Patch makes the behavior of the llvm-objdump to be consistent with the GNU objdump.
Differential revision: https://reviews.llvm.org/D56076
llvm-svn: 350840
See https://bugs.llvm.org/show_bug.cgi?id=40070.
GNU addr2line accepts input addresses both on the command-line and via
stdin. llvm-symbolizer previously only supported the latter. This
change adds support for the former. As with addr2line, the new
behaviour is to only look for addresses on stdin if no positional
arguments were provided to llvm-symbolizer.
Reviewed by: ruiu
Differential Revision: https://reviews.llvm.org/D56272
llvm-svn: 350821
When GNU objdump dumps the input with -d it prints the symbol addresses,
for example:
0000000000000031 <foo>:
31: 00 00 add %al,(%rax)
...
llvm-objdump currently does not do that.
Patch changes the behavior to match the GNU objdump.
That is useful for implementing -z/--disassemble-zeroes (D56083),
it allows omitting first zero bytes and keep the information
about the symbol address in the output.
Differential revision: https://reviews.llvm.org/D56123
llvm-svn: 350726
This patch improves llvm-profdata show command:
(1) add -value-cutoff=<N> option: Show only those functions whose max count
values are greater or equal to N.
(2) add -list-below-cutoff option: Only output names of functions whose max
count value are below the cutoff.
(3) formats value-profile counts and prints out percentage.
Differential Revision: https://reviews.llvm.org/D56342
llvm-svn: 350673
The unobufscation support for BCSymbolMaps was the last piece of code
that hasn't been upstreamed yet. This patch contains a reworked version
of the existing code and relevant tests.
Differential revision: https://reviews.llvm.org/D56346
llvm-svn: 350580
In LTO or Thin-lto mode (though linker plugin), the module
names are of temp file names which are different for
different compilations. Using SourceFileName avoids the issue.
This should not change any functionality for current PGO as
all the current callers of getPGOFuncName() is before LTO.
llvm-svn: 350579
Although llvm-elfabi will attempt to read input files without needing the format to be manually specified, doing so has the potential to introduce extraneous errors that can hinder debugging (since multiple readers may fail in attempts to read the file). This change allows the input file format to be manually specified to force elfabi to use a single reader. This makes it easier to test and debug errors specific to a given reader.
llvm-svn: 350545
Summary:
The -O flag is currently being mostly ignored; it's only checked whether or not the output format is "binary". This adds support for a few formats (e.g. elf64-x86-64), so that when specified, the output can change between 32/64 bit and sizes/alignments are updated accordingly.
This fixes PR39135
Reviewers: jakehehrlich, jhenderson, alexshap, espindola
Reviewed By: jhenderson
Subscribers: emaste, arichardson, llvm-commits
Differential Revision: https://reviews.llvm.org/D53667
llvm-svn: 350541
Follow up for D53051
This patch introduces the tool associated with the ELF implementation of
TextAPI (previously llvm-tapi, renamed for better distinction). This
tool will house a number of features related to enalysis and
manipulation of shared object's exposed interfaces. The first major
feature for this tool is support for producing binary stubs that are
useful for compile-time linking of shared objects. This patch introduces
beginnings of support for reading binary ELF objects to work towards
that goal.
Added:
- elfabi tool.
- support for reading architecture from a binary ELF file into an
ELFStub.
- Support for writing .tbe files.
Differential Revision: https://reviews.llvm.org/D55352
llvm-svn: 350341
Summary:
Fix EntrySize, Size, and Align before doing layout calculation.
As a side cleanup, this removes a dependence on sizeof(Elf_Sym) within BinaryReader, so we can untemplatize that.
This unblocks a cleaner implementation of handling the -O<format> flag. See D53667 for a previous attempt. Actual implementation of the -O<format> flag will come in an upcoming commit, this is largely a NFC (although not _totally_ one, because alignment on binary input was actually wrong before).
Reviewers: jakehehrlich, jhenderson, alexshap, espindola
Reviewed By: jhenderson
Subscribers: emaste, arichardson, llvm-commits
Differential Revision: https://reviews.llvm.org/D56211
llvm-svn: 350336
Make sure all print statements are compatible with Python 2 and Python3 using
the `from __future__ import print_function` statement.
Differential Revision: https://reviews.llvm.org/D56249
llvm-svn: 350307
There can be multiple local symbols with the same name (for e.g.
comdat sections), and thus the symbol name itself isn't enough
to disambiguate symbols.
Differential Revision: https://reviews.llvm.org/D56140
llvm-svn: 350288
Summary:
Sometimes it's useful to emit assembly after LTO stage to modify it manually. Emitting precodegen bitcode file (via save-temps plugin option) and then feeding it to llc doesn't always give the same binary as original.
This patch is simpler alternative to https://reviews.llvm.org/D24020.
Patch by Denis Bakhvalov.
Reviewers: mehdi_amini, tejohnson
Reviewed By: tejohnson
Subscribers: MaskRay, inglorion, dexonsmith, llvm-commits
Differential Revision: https://reviews.llvm.org/D56114
llvm-svn: 350276
These tools were assuming ABI version is 0,
that is not always true.
Patch teaches them to work with that field.
Differential revision: https://reviews.llvm.org/D55884
llvm-svn: 349737
This is to address post-commit feedback from Paul Robinson on r348954.
The original commit misinterprets count and upper bound as the same thing (I thought I saw GCC producing an upper bound the same as Clang's count, but GCC correctly produces an upper bound that's one less than the count (in C, that is, where arrays are zero indexed)).
I want to preserve the C-like output for the common case, so in the absence of a lower bound the count (or one greater than the upper bound) is rendered between []. In the trickier cases, where a lower bound is specified, a half-open range is used (eg: lower bound 1, count 2 would be "[1, 3)" and an unknown parts use a '?' (eg: "[1, ?)" or "[?, 7)" or "[?, ? + 3)").
Reviewers: aprantl, probinson, JDevlieghere
Differential Revision: https://reviews.llvm.org/D55721
llvm-svn: 349670
This is an initial implementation of no-op passthrough copying of COFF
with objcopy.
Differential Revision: https://reviews.llvm.org/D54939
llvm-svn: 349605
This is https://bugs.llvm.org/show_bug.cgi?id=39992,
If we have the following code (test.cpp):
thread_local int tdata = 24;
and build an .o file with debug information:
clang --target=x86_64-pc-linux -c bar.cpp -g
Then object produced may have R_X86_64_DTPOFF64/R_X86_64_DTPOFF32 relocations.
(clang emits R_X86_64_DTPOFF64 and gcc emits R_X86_64_DTPOFF32 for the code above for me)
Currently, llvm-dwarfdump fails to compute this TLS relocation when dumping
object and reports an
error:
failed to compute relocation: R_X86_64_DTPOFF64, Invalid data was encountered while parsing the file
This relocation represents the offset in the TLS block and resolved by the linker,
but this info is unavailable at the
point when the object file is dumped by this tool.
The patch adds the simple evaluation for such relocations to avoid emitting errors.
Resulting behavior seems to be equal to GNU dwarfdump.
Differential revision: https://reviews.llvm.org/D55762
llvm-svn: 349476
Class InstrBuilder wrongly assumed that llvm targets were always able to return
a non-null pointer when createMCInstrAnalysis() was called on them.
This was causing crashes when simulating executions for targets that don't
provide an MCInstrAnalysis object.
This patch fixes the issue by making MCInstrAnalysis optional.
llvm-svn: 349352
When the instrumented binary is linked as PIE, we need to apply the
relative relocations to sleds. This is handled by the dynamic linker
at runtime, but when processing the file we have to do it ourselves.
Differential Revision: https://reviews.llvm.org/D55542
llvm-svn: 349120
Summary:
llvm-size uses "isText()" etc. which seem to indicate whether the section contains code-like things, not whether or not it will actually go in the text segment when in a fully linked executable.
The unit test added (elf-sizes.test) shows some types of sections that cause discrepencies versus the GNU size tool. llvm-size is not correctly reporting sizes of things mapping to text/data segments, at least for ELF files.
This fixes pr38723.
Reviewers: echristo, Bigcheese, MaskRay
Reviewed By: MaskRay
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D54369
llvm-svn: 349074
Doesn't handle varargs and other fun things, but it's a start. (also
doesn't print these strictly as valid C++ when it's a pointer to
function, it'll print as "void(int)*" instead of "void (*)(int)")
llvm-svn: 348965
Refactor the scheduling predicates based on `MCInstPredicate`. In this
case, for the Exynos processors.
Differential revision: https://reviews.llvm.org/D55345
llvm-svn: 348774
Summary: This should avoid failing on old CPUs that do not have a cycle counter.
Subscribers: tschuett, llvm-commits
Differential Revision: https://reviews.llvm.org/D55416
llvm-svn: 348740
PE/COFF sections can have section names truncated to 8 chars, in order to
have the name available at runtime. (The string table, where long untruncated
names are stored, isn't loaded at runtime.)
This allows various llvm tools to dump the .eh_frame section from such
executables.
Patch by Peiyuan Song!
Differential Revision: https://reviews.llvm.org/D55407
llvm-svn: 348708
It was failing as below. Adding a triple seems to help.
--
: 'RUN: at line 2'; /work/llvm.combined/build.release/bin/llvm-mca -march=aarch64 -mcpu=exynos-m1 -resource-pressure=false < /work/llvm.combined/llvm/test/tools/llvm-mca/AArch64/Exynos/direct-branch.s | /work/llvm.combined/build.release/bin/FileCheck /work/llvm.combined/llvm/test/tools/llvm-mca/AArch64/Exynos/direct-branch.s -check-prefixes=ALL,M1
: 'RUN: at line 3'; /work/llvm.combined/build.release/bin/llvm-mca -march=aarch64 -mcpu=exynos-m3 -resource-pressure=false < /work/llvm.combined/llvm/test/tools/llvm-mca/AArch64/Exynos/direct-branch.s | /work/llvm.combined/build.release/bin/FileCheck /work/llvm.combined/llvm/test/tools/llvm-mca/AArch64/Exynos/direct-branch.s -check-prefixes=ALL,M3
--
Exit Code: 1
Command Output (stderr):
--
/work/llvm.combined/llvm/test/tools/llvm-mca/AArch64/Exynos/direct-branch.s:36:12: error: M1-NEXT: expected string not found in input
^
<stdin>:21:2: note: scanning from here
1 0 0.25 b Ltmp0
^
--
llvm-svn: 348577
The test was fully rewritten for simplification.
New test code was suggested by David Blaikie.
Differential revision: https://reviews.llvm.org/D55261
llvm-svn: 348464
I just hard core goofed when I wrote this and created a different name
for no good reason. I'm failry aware of most "fresh" users of llvm-objcopy
(that is, users which are not using it as a drop in replacement for GNU
objcopy) and can say that only "-j" is being used by such people so this
patch should strictly increase compatibility and not remove it.
Differential Revision: https://reviews.llvm.org/D52180
llvm-svn: 348446
Split timestamp preservation tests into atime and mtime test, and skip
the former on NetBSD. When the filesystem is mounted noatime, NetBSD
not only inhibits implicit atime updates but also prevents setting atime
via utime(), causing the test to fail.
Differential Revision: https://reviews.llvm.org/D55271
llvm-svn: 348354
This flag does not exist in GNU objcopy but has a major use case.
Debugging tools support the .build-id directory structure to find
debug binaries. There is no easy way to build this structure up
however. One way to do it is by using llvm-readelf and some crazy
shell magic. This implements the feature directly. It is most often
the case that you'll want to strip a file and send the original to
the .build-id directory but if you just want to send a file to the
.build-id directory you can copy to /dev/null instead.
Differential Revision: https://reviews.llvm.org/D54384
llvm-svn: 348174
When there is no .debug_addr section for some reason,
llvm-dwarfdump would print the bogus empty section name when dumping ranges
in .debug_info:
DW_AT_ranges [DW_FORM_rnglistx] (indexed (0x0) rangelist = 0x00000004
[0x0000000000000000, 0x0000000000000001) ""
[0x0000000000000000, 0x0000000000000002) "")
That happens because of the code which uses 0 (zero) as a section index as a default value.
The code should use -1ULL instead because technically 0 is a valid zero section index
in ELF and -1ULL is a special constant used that means "no section available".
This is mostly a fix for the overall correctness/safety of the code,
but a test case is provided too.
Differential revision: https://reviews.llvm.org/D55113
llvm-svn: 348115
Usually local symbols will have their address described in the debug
map. Global symbols have to have their address looked up in the symbol
table of the main executable. By playing with 'ld -r' and export lists,
you can get a symbol described as global by the debug map while actually
being a local symbol as far as the link in concerned. By gathering the
address of local symbols, we fix this issue.
Also, we prefer a global symbol in case of a name collision to preserve
the previous behavior.
Note that using the 'ld -r' tricks, people can actually cause symbol
names collisions that dsymutil has no way to figure out. This fixes the
simple case where there is only one symbol of a given name.
rdar://problem/32826621
Differential revision: https://reviews.llvm.org/D54922
llvm-svn: 348021
In this diff the elf-specific tests are moved into the subfolder llvm-objcopy/ELF
(the change was discussed in the comments on https://reviews.llvm.org/D54674).
A separate code reivew wasn't sent for this change
since Phabricator is failing to create such a large diff.
Test plan:
make check-all
make check-llvm-tools
make check-llvm-tools-llvm-objcopy
llvm-svn: 347958
This patch adds the ability to specify via tablegen which processor resources
are load/store queue resources.
A new tablegen class named MemoryQueue can be optionally used to mark resources
that model load/store queues. Information about the load/store queue is
collected at 'CodeGenSchedule' stage, and analyzed by the 'SubtargetEmitter' to
initialize two new fields in struct MCExtraProcessorInfo named `LoadQueueID` and
`StoreQueueID`. Those two fields are identifiers for buffered resources used to
describe the load queue and the store queue.
Field `BufferSize` is interpreted as the number of entries in the queue, while
the number of units is a throughput indicator (i.e. number of available pickers
for loads/stores).
At construction time, LSUnit in llvm-mca checks for the presence of extra
processor information (i.e. MCExtraProcessorInfo) in the scheduling model. If
that information is available, and fields LoadQueueID and StoreQueueID are set
to a value different than zero (i.e. the invalid processor resource index), then
LSUnit initializes its LoadQueue/StoreQueue based on the BufferSize value
declared by the two processor resources.
With this patch, we more accurately track dynamic dispatch stalls caused by the
lack of LS tokens (i.e. load/store queue full). This is also shown by the
differences in two BdVer2 tests. Stalls that were previously classified as
generic SCHEDULER FULL stalls, are not correctly classified either as "load
queue full" or "store queue full".
About the differences in the -scheduler-stats view: those differences are
expected, because entries in the load/store queue are not released at
instruction issue stage. Instead, those are released at instruction executed
stage. This is the main reason why for the modified tests, the load/store
queues gets full before PdEx is full.
Differential Revision: https://reviews.llvm.org/D54957
llvm-svn: 347857
This allows libtool to detect the presence of llvm-strip and use
it with the options --strip-debug and --strip-unneeded.
Also hook up the -V alias for objcopy.
Differential Revision: https://reviews.llvm.org/D54936
llvm-svn: 347731
This change is in preparation for a patch that fixes PR36666.
llvm-mca currently doesn't know if a buffered processor resource describes a
load or store queue. So, any dynamic dispatch stall caused by the lack of
load/store queue entries is normally reported as a generic SCHEDULER stall. See for
example the -dispatch-stats output from the two tests modified by this patch.
In future, processor models will be able to tag processor resources that are
used to describe load/store queues. That information would then be used by
llvm-mca to correctly classify dynamic dispatch stalls caused by the lack of
tokens in the LS.
llvm-svn: 347662
Summary:
By default sanstats search binaries at the same location where they were when
stats was collected. Sometime you can not print report immediately or you need
to move post-processing to another workstation. To support this use-case when
original binary is missing sanstats will fall-back to directory with sanstats
file.
Reviewers: pcc
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D53857
llvm-svn: 347601
Summary: Help with off-line symbolization or other type debugging.
Reviewers: pcc
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D53606
llvm-svn: 347600
Refactor the scheduling predicates based on `MCInstPredicate`. In this
case, `AArch64InstrInfo::hasShiftedReg()`.
Differential revision: https://reviews.llvm.org/D54820
llvm-svn: 347598
Refactor the scheduling predicates based on `MCInstPredicate`. In this
case, `AArch64InstrInfo::isScaledAddr()`
Differential revision: https://reviews.llvm.org/D54777
llvm-svn: 347597
By default, llvm-mca conservatively assumes that a register operand from the
variadic sequence is both a register read and a register write. That is because
MCInstrDesc doesn't describe extra variadic operands; we don't have enough
dataflow information to tell which register operands from the variadic sequence
is a definition, and which is a use instead.
However, if a variadic instruction is flagged 'mayStore' (but not 'mayLoad'),
and it has no 'unmodeledSideEffects', then llvm-mca (very) optimistically
assumes that any register operand in the variadic sequence is a register read
only. Conversely, if a variadic instruction is marked as 'mayLoad' (but not
'mayStore'), and it has no 'unmodeledSideEffects', then llvm-mca optimistically
assumes that any extra register operand is a register definition only.
These assumptions work quite well for variadic load/store multiple instructions
defined by the ARM backend.
llvm-svn: 347522
`llvm-mca` relies on the predicates to be based on `MCSchedPredicate` in order
to resolve the scheduling for variant instructions. Otherwise, it aborts
the building of the instruction model early.
However, the scheduling model emitter in `TableGen` gives up too soon, unless
all processors use only such predicates.
In order to allow more processors to be used with `llvm-mca`, this patch
emits scheduling transitions if any processor uses these predicates. The
transition emitted for the processors using legacy predicates is the one
specified with `NoSchedPred`, which is based on `MCSchedPredicate`.
Preferably, `llvm-mca` should instead assume a reasonable default when a
variant transition is not based on `MCSchedPredicate` for a given processor.
This issue should be revisited in the future.
Differential revision: https://reviews.llvm.org/D54648
llvm-svn: 347504
With this change, InstrBuilder emits an error if the MCInst sequence contains an
instruction with a variadic opcode, and a non-zero number of variadic operands.
Currently we don't know how to correctly analyze variadic opcodes. The problem
with variadic operands is that there is no information for them in the opcode
descriptor (i.e. MCInstrDesc). That means, we don't know which variadic operands
are defs, and which are uses.
In future, we could try to conservatively assume that any extra register
operands is both a register use and a register definition.
This patch fixes a subtle bug in the evaluation of read/write operands for ARM
VLD1 with implicit index update. Added test vld1-index-update.s
llvm-svn: 347503
RetireControlUnitStatistics now reports extra information about the ROB and the
avg/maximum number of entries consumed over the entire simulation.
Example:
Retire Control Unit - number of cycles where we saw N instructions retired:
[# retired], [# cycles]
0, 109 (17.9%)
1, 102 (16.7%)
2, 399 (65.4%)
Total ROB Entries: 64
Max Used ROB Entries: 35 ( 54.7% )
Average Used ROB Entries per cy: 32 ( 50.0% )
Documentation in llvm/docs/CommandGuide/llvmn-mca.rst has been updated to
reflect this change.
llvm-svn: 347493
This patch fixes an invalid memory read introduced by r346487.
Before this patch, partial register write had to query the latency of the
dependent full register write by calling a method on the full write descriptor.
However, if the full write is from an already retired instruction, chances are
that the EntryStage already reclaimed its memory.
In some parial register write tests, valgrind was reporting an invalid
memory read.
This change fixes the invalid memory access problem. Writes are now responsible
for tracking dependent partial register writes, and notify them in the event of
instruction issued.
That means, partial register writes no longer need to query their associated
full write to check when they are ready to execute.
Added test X86/BtVer2/partial-reg-update-7.s
llvm-svn: 347459
Summary:
llvm-objcopy/strip support `--keep` (for sections) and `--keep-symbols` (for symbols). For consistency and clarity, rename `--keep` to `--keep-section`.
In fact, for GNU compatability, -K is --keep-symbol, so it's weird that the alias `-K` is not the same as the short-ish `--keep`.
Reviewers: jakehehrlich, jhenderson, alexshap, MaskRay, espindola
Reviewed By: jakehehrlich, MaskRay
Subscribers: emaste, arichardson, llvm-commits
Differential Revision: https://reviews.llvm.org/D54477
llvm-svn: 346782
Summary:
This change adds a bunch of options that GNU readelf supports. There is one breaking change when invoked as `llvm-readobj`, and three breaking changes when invoked as `llvm-readelf`:
- Add --all (implies --file-header, --program-headers, etc.)
- [Breaking] -a is --all instead of --arm-attributes
- Add --file-header as an alias for --file-headers
- Replace --sections with --sections-headers, keeping --sections as an alias for it
- Add --relocs as an alias for --relocations
- Add --dynamic as an alias for --dynamic-table
- Add --segments as an alias for --program-headers
- Add --section-groups as an alias for --elf-section-groups
- Add --dyn-syms as an alias for --dyn-symbols
- Add --syms as an alias for --symbols
- Add --histogram as an alias for --elf-hash-histogram
- [Breaking] When invoked as `llvm-readelf`, -s is --symbols instead of --sections
- [Breaking] When invoked as `llvm-readelf`, -t is no longer an alias for --symbols
Reviewers: MaskRay, phosek, mcgrathr, jhenderson
Reviewed By: MaskRay, jhenderson
Subscribers: sbc100, aheejin, edd, jhenderson, silvas, echristo, compnerd, kristina, javed.absar, kristof.beyls, llvm-commits, Bigcheese
Differential Revision: https://reviews.llvm.org/D54124
llvm-svn: 346685
When looking at the tests committed by Roman at r346587, I noticed that numbers
reported by the resource pressure for PdAGU01 were wrong.
In particular, according to the aut-generated CHECK lines in tests
memcpy-like-test.s and store-throughput.s, resource pressure for PdAGU01
was not uniformly distributed among the two AGEN pipes.
It turns out that the reason why pressure was not correctly distributed, was
because the "resource selection strategy" object associated with PdAGU01 was not
correctly updated on the event of AGEN pipe used.
As a result, llvm-mca was not simulating a round-robin pipeline allocation for
PdAGU01. Instead, PdAGU1 was always prioritized over PdAGU0.
This patch fixes the issue; now processor resource strategy objects for
resources declaring multiple units, are correctly notified in the event of
"resource used".
llvm-svn: 346650
Improve compatibility with GNU objdump by showing `O` next to
global symbol names, instead of a blank space.
Patch by Higuoxing (Xing).
Reviewers: MaskRay
Differential Revision: https://reviews.llvm.org/D54380
llvm-svn: 346610
There are two AGU units, and per 1cy, there can be either two loads,
or a load and a store; but not two stores, or two loads and a store.
Additionally, loads shouldn't affect the store scheduler and vice versa.
(but *should* affect the PdEX scheduler.)
Required rL346545.
Fixes https://bugs.llvm.org/show_bug.cgi?id=39465
llvm-svn: 346587
Summary:
The current implementation prepends a space on every line, making it difficult to compare against GNU strings.
The space appears to have come from handling --radix in rL292707. The space is for making sure there's a space between the radix and the value; however the space is still emitted even when there is no radix. This change fixes that so the space is only emitted when there is a radix.
Reviewers: jhenderson
Reviewed By: jhenderson
Subscribers: llvm-commits, compnerd
Differential Revision: https://reviews.llvm.org/D54238
llvm-svn: 346529
Summary:
lcov tracefiles are used by various coverage reporting tools and build
systems (e.g., Bazel). It is a simple text-based format to parse and
more convenient to use than the JSON export format, which needs
additional processing to map regions/segments back to line numbers.
It's a little unfortunate that "text" format is now overloaded to refer
specifically to JSON for export, but I wanted to avoid making any
breaking changes to the UI of the llvm-cov tool at this time.
Patch by Tony Allevato (@allevato).
Reviewers: Dor1s, vsk
Reviewed By: Dor1s, vsk
Subscribers: mgorny, llvm-commits
Differential Revision: https://reviews.llvm.org/D54266
llvm-svn: 346506
CMake invokes rc using the joined spelling which appears to be supported
by Microsoft's rc implementation, so we should support it as well.
Differential Revision: https://reviews.llvm.org/D54191
llvm-svn: 346470
CMake generate manifests that contain absolute filenames and these
currently result in assertion error. This change ensures that we
handle these correctly.
Differential Revision: https://reviews.llvm.org/D54194
llvm-svn: 346450
As noted by Andrea Di Biagio in https://bugs.llvm.org/show_bug.cgi?id=39465
both the loads and stores occupy both the store and load queues.
This is clearly wrong.
llvm-svn: 346425
LC_BUILD_VERSION contains platform information that is useful for LLDB
to match up dSYM bundles with binaries. This patch copies the load
command over into the dSYM.
rdar://problem/44145175
rdar://problem/45883463
Differential Revision: https://reviews.llvm.org/D54233
llvm-svn: 346412
During review it was noted that while it appears that
the Piledriver can do two [consecutive] loads per cycle,
it can only do one store per cycle. It was suggested
that the sched model incorrectly models that,
but it was opted to fix this afterwards.
These tests show that the two consecutive loads are
modelled correctly, and one consecutive stores is not
modelled incorrectly. Unless i'm missing the point.
https://bugs.llvm.org/show_bug.cgi?id=39465
llvm-svn: 346404
Summary:
Port the GNU style printNotes method to the LLVMStyle subclass.
This is basically just a heavy refactor so that the note parsing/formatting logic from the GNUStyle::printNotes can be shared with LLVMStyle::printNotes.
Reviewers: MaskRay
Reviewed By: MaskRay
Subscribers: dschuff, fedor.sergeev, llvm-commits
Differential Revision: https://reviews.llvm.org/D54220
llvm-svn: 346371
Summary:
Add unit tests to check the support for each supported format to avoid
regressions such as the one in PR36906.
Reviewers: gchatelet
Subscribers: tschuett, lebedev.ri, llvm-commits
Differential Revision: https://reviews.llvm.org/D54144
llvm-svn: 346330
Summary:
This updates generated binaries and corresponding test cases up to date
after applying FixFunctionBitcasts pass.
Reviewers: sbc100
Subscribers: dschuff, jgravelle-google, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D54070
llvm-svn: 346286
Summary:
This change cuts across LLVM and compiler-rt to add support for
rendering custom events in the XRayRecord type, to allow for including
user-provided annotations in the output YAML (as raw bytes).
This work enables us to add custom event and typed event records into
the `llvm::xray::Trace` type for user-provided events. This can then be
programmatically handled through the C++ API and can be included in some
of the tooling as well. For now we support printing the raw data we
encounter in the custom events in the converted output.
Future work will allow us to start interpreting these custom and typed
events through a yet-to-be-defined API for extending the trace analysis
library.
Reviewers: mboerger
Subscribers: hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D54139
llvm-svn: 346214
Adding functionality to the DWARF verifier for DWARF v5 strx* forms which
index into the string offsets table.
Differential Revision: https://reviews.llvm.org/D54049
llvm-svn: 346061
Use getImageBase() helper to compute the image base. Fix various
offsets/addresses/masks so they're actually correct.
This allows decoding unwind info from DLLs, and unwind info from object
files containing multiple functions.
Differential Revision: https://reviews.llvm.org/D54015
llvm-svn: 346036
Running "llvm-pdbutil dump -all" on linux (using the native PDB reader),
over a few PDBs pulled from the Microsoft public symbol store uncovered
a few small issues:
- stripped PDBs might not have the strings stream (/names)
- stripped PDBs might not have the "module info" stream
Differential Revision: https://reviews.llvm.org/D54006
llvm-svn: 346010
This patch teaches view RegisterFileStatistics how to report events for
optimizable register moves.
For each processor register file, view RegisterFileStatistics reports the
following extra information:
- Number of optimizable register moves
- Number of register moves eliminated
- Number of zero moves (i.e. register moves that propagate a zero)
- Max Number of moves eliminated per cycle.
Differential Revision: https://reviews.llvm.org/D53976
llvm-svn: 345865
Summary: ar and objcopy/strip all support configuring whether archives are written deterministically (timestamps/UIDs/GIDs/etc zero'd). This has been ported to llvm-ar (the U/D modifiers) but not yet to llvm-objcopy/strip.
Reviewers: jakehehrlich, jhenderson, alexshap
Reviewed By: jhenderson
Subscribers: ruiu, mgrang, llvm-commits
Differential Revision: https://reviews.llvm.org/D53913
llvm-svn: 345859
Summary:
--localize-symbol and --localize-hidden will currently localize common symbols. GNU objcopy will not localize these symbols even when explicitly requested, which seems reasonable; common symbols should always be global so they can be merged during linking.
See PR39461
Reviewers: jakehehrlich, jhenderson, alexshap, MaskRay, espindola
Reviewed By: jakehehrlich, jhenderson, alexshap, MaskRay
Subscribers: emaste, arichardson, alexshap, MaskRay, llvm-commits
Differential Revision: https://reviews.llvm.org/D53782
llvm-svn: 345856
Summary: --keep-global-symbol and --globalize-symbol don't make sense for undefined symbols, so it should be ignored for those symbols. This matches GNU objcopy behavior.
Reviewers: jhenderson, alexshap, jakehehrlich, espindola
Reviewed By: jhenderson, jakehehrlich
Subscribers: emaste, arichardson, llvm-commits
Differential Revision: https://reviews.llvm.org/D53733
llvm-svn: 345614
This fixes PR39402. The crash was caused when dereferencing nullptr in
DumpObject and printArchiveChild.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D53690
Patch by Xing GUO
llvm-svn: 345503
Adding the baseline tests in a preparatory NFC commit,
so that the actual commit shows the *diff*.
Yes, i'm aware that a few of these codegen-based sched tests
are testing wrong instructions, i will fix that afterwards.
For https://reviews.llvm.org/D52779
llvm-svn: 345462
Relocatable content may have overlapping ranges until the sections are
finalized. This reduces the amount of verification that is done on an object
file so that invalid errors are not raised.
llvm-svn: 345441
ADDLIB is called to add the contents of an archive to another archive.
Previously this was only accessible through the use of an MRI script.
With the use of a new "L" modifier, archive files can treated in the
manner above when using quick append.
llvm-svn: 345383
As was already mentioned in comments for D53364, DWARF 5
spec says about DW_LLE_startx_length:
"This is a form of bounded location description that has two unsigned ULEB operands.
The first value is an address index (into the .debug_addr section) that indicates the beginning of the address range
over which the location is valid. The second value is the length of the range. ")
Currently, the length is always parsed as U32.
Patch change the behavior to parse DW_LLE_startx_length as ULEB128 for DWARF 5
and keeps it as U32 for DWARF4+(pre-DWARF5) for compatibility.
Differential revision: https://reviews.llvm.org/D53564
llvm-svn: 345254
GNU readelf tool prints hex value of the ELF header flags field and the
flags names. This change adds the same functionality to llvm-readobj.
Now llvm-readobj can print MIPS and RISCV flags.
New GNUStyle::printFlags() method is a copy of ScopedPrinter::printFlags()
routine. Probably we can escape code duplication and / or simplify the
printFlags() method. But it's a task for separate commit.
Differential revision: https://reviews.llvm.org/D52027
llvm-svn: 345238
Summary:
This renames the IsParsingMSInlineAsm member variable of AsmLexer to
LexMasmIntegers and moves it up to MCAsmLexer. This is the only behavior
controlled by that variable. I added a public setter, so that it can be
set from outside or from the llvm-mc command line. We may need to
arrange things so that users can get this behavior from clang, but
that's future work.
I also put additional hex literal lexing functionality under this flag
to fix PR32973. It appears that this hex literal parsing wasn't intended
to be enabled in non-masm-style blocks.
Now, masm integers (0b1101 and 0ABCh) work in __asm blocks from clang,
but 0b label references work when using .intel_syntax in standalone .s
files.
However, 0b label references will *not* work from __asm blocks in clang.
They will work from GCC inline asm blocks, which it sounds like is
important for Crypto++ as mentioned in PR36144.
Essentially, we only lex masm literals for inline asm blobs that use
intel syntax. If the .intel_syntax directive is used inside a gnu-style
inline asm statement, masm literals will not be lexed, which is
compatible with gas and llvm-mc standalone .s assembly.
This fixes PR36144 and PR32973.
Reviewers: Gerolf, avt77
Subscribers: eraman, hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D53535
llvm-svn: 345189
Summary:
The current default of appending "_"+entry block label to the new
extracted cold function breaks demangling. Change the deliminator from
"_" to "." to enable demangling. Because the header block label will
be empty for release compile code, use "extracted" after the "." when
the label is empty.
Additionally, add a mechanism for the client to pass in an alternate
suffix applied after the ".", and have the hot cold split pass use
"cold."+Count, where the Count is currently 1 but can be used to
uniquely number multiple cold functions split out from the same function
with D53588.
Reviewers: sebpop, hiraditya
Subscribers: llvm-commits, erik.pilkington
Differential Revision: https://reviews.llvm.org/D53534
llvm-svn: 345178
On Windows at least, llvm-strings was crashing if it encountered bytes
that mapped to negative chars, as it was passing these into
std::isgraph and std::isblank functions, resulting in undefined
behaviour. On debug builds using MSVC, these functions verfiy that the
value passed in is representable as an unsigned char. Since the char is
promoted to an int, a value greater than 127 would turn into a negative
integer value, and fail the check. Using the llvm::isPrint function is
sufficient to solve the issue.
Reviewed by: ruiu, mstorsjo
Differential Revision: https://reviews.llvm.org/D53509
llvm-svn: 345137
A new class named InstructionError has been added to Support.h in order to
improve the error reporting from class InstrBuilder.
The llvm-mca driver is responsible for handling InstructionError objects, and
printing them out to stderr.
The goal of this patch is to remove all the remaining error handling logic from
the library code.
In particular, this allows us to:
- Simplify the logic in InstrBuilder by removing a needless dependency from
MCInstrPrinter.
- Centralize all the error halding logic in a new function named 'runPipeline'
(see llvm-mca.cpp).
This is also a first step towards generalizing class InstrBuilder, so that in
future, we will be able to reuse its logic to also "lower" MachineInstr to
mca::Instruction objects.
Differential Revision: https://reviews.llvm.org/D53585
llvm-svn: 345129
This patch adds support for dumping the unwind info from ARM64 COFF object
files.
Differential Revision: https://reviews.llvm.org/D53264
llvm-svn: 345108
Using -diff and -verbose together doesn't work today. We should audit
where these two options interact and fix them. In the meantime we error
out when the user try to specify both.
llvm-svn: 345084
Summary:
GNU strip supports both `-s` and `-S` as aliases for `--strip-all` and `--strip-debug`, respectfully.
As part of this, it turns out that strip/objcopy were accepting case insensitive command line args. I'm not sure if there was an explicit reason for this. The only others uses of this are llvm-cvtres/llvm-mt/llvm-lib, which are all tools specific for windows support. Forcing case sensitivity allows both aliases to exist, but seems like a good idea anyway.
And as a surprise test case adjustment, the llvm-strip unit test was running with `-keep=unavailable_symbol`, despite `keep` not be a valid flag for strip. This is because there is a flag `-K` which, when case insensitivity is permitted, allows it to be interpreted as `-K` = `eep=unavailable_symbol` (e.g. to allow `-Kfoo` == `--keep-symbol=foo`).
Reviewers: jakehehrlich, jhenderson, alexshap
Reviewed By: jakehehrlich
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D53163
llvm-svn: 345068
Changed the format call to match the surrounding code. Previously it was
printing an unsigned int while the return type being printed was
long unsigned int or wider. This caused problems for big-endian systems
which were discovered on mips64.
Also, the printed address had less characters than it should because the
character count was directly obtained from the number of bytes in the
address.
The tests were adapted to fit this fix and now use longer addresses.
Patch by Milos Stojanovic.
Differential Revision: https://reviews.llvm.org/D53403
llvm-svn: 344818
All the PassBuilder::parse interfaces now return descriptive StringError
instead of a plain bool. It allows to make -passes/aa-pipeline parsing
errors context-specific and thus less confusing.
TODO: ideally we should also make suggestions for misspelled pass names,
but that requires some extensions to PassBuilder.
Reviewed By: philip.pfaffe, chandlerc
Differential Revision: https://reviews.llvm.org/D53246
llvm-svn: 344685
Summary:
All the PassBuilder::parse interfaces now return descriptive StringError
instead of a plain bool. It allows to make -passes/aa-pipeline parsing
errors context-specific and thus less confusing.
TODO: ideally we should also make suggestions for misspelled pass names,
but that requires some extensions to PassBuilder.
Reviewed By: philip.pfaffe, chandlerc
Differential Revision: https://reviews.llvm.org/D53246
llvm-svn: 344519
This patch adds the ability to identify instructions that are "move elimination
candidates". It also allows scheduling models to describe processor register
files that allow move elimination.
A move elimination candidate is an instruction that can be eliminated at
register renaming stage.
Each subtarget can specify which instructions are move elimination candidates
with the help of tablegen class "IsOptimizableRegisterMove" (see
llvm/Target/TargetInstrPredicate.td).
For example, on X86, BtVer2 allows both GPR and MMX/SSE moves to be eliminated.
The definition of 'IsOptimizableRegisterMove' for BtVer2 looks like this:
```
def : IsOptimizableRegisterMove<[
InstructionEquivalenceClass<[
// GPR variants.
MOV32rr, MOV64rr,
// MMX variants.
MMX_MOVQ64rr,
// SSE variants.
MOVAPSrr, MOVUPSrr,
MOVAPDrr, MOVUPDrr,
MOVDQArr, MOVDQUrr,
// AVX variants.
VMOVAPSrr, VMOVUPSrr,
VMOVAPDrr, VMOVUPDrr,
VMOVDQArr, VMOVDQUrr
], CheckNot<CheckSameRegOperand<0, 1>> >
]>;
```
Definitions of IsOptimizableRegisterMove from processor models of a same
Target are processed by the SubtargetEmitter to auto-generate a target-specific
override for each of the following predicate methods:
```
bool TargetSubtargetInfo::isOptimizableRegisterMove(const MachineInstr *MI)
const;
bool MCInstrAnalysis::isOptimizableRegisterMove(const MCInst &MI, unsigned
CPUID) const;
```
By default, those methods return false (i.e. conservatively assume that there
are no move elimination candidates).
Tablegen class RegisterFile has been extended with the following information:
- The set of register classes that allow move elimination.
- Maxium number of moves that can be eliminated every cycle.
- Whether move elimination is restricted to moves from registers that are
known to be zero.
This patch is structured in three part:
A first part (which is mostly boilerplate) adds the new
'isOptimizableRegisterMove' target hooks, and extends existing register file
descriptors in MC by introducing new fields to describe properties related to
move elimination.
A second part, uses the new tablegen constructs to describe move elimination in
the BtVer2 scheduling model.
A third part, teaches llm-mca how to query the new 'isOptimizableRegisterMove'
hook to mark instructions that are candidates for move elimination. It also
teaches class RegisterFile how to describe constraints on move elimination at
PRF granularity.
llvm-mca tests for btver2 show differences before/after this patch.
Differential Revision: https://reviews.llvm.org/D53134
llvm-svn: 344334
Summary:
This change adds support for the GNU --target flag, which sets both --input-target and --output-target.
GNU objcopy doesn't do any checking for whether both --target and --{input,output}-target are used, and so it allows both, e.g. "--target A --output-target B" is equivalent to "--input-target A --output-target B" since the later command line flag would override earlier ones. This may be error prone, so I chose to implement it as an error if both are used. I'm not sure if anyone is actually using both.
Reviewers: jakehehrlich, jhenderson, alexshap
Reviewed By: jakehehrlich, alexshap
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D53029
llvm-svn: 344321
libtool requires this text to be present, in order to conclude that
the tool supports response files. Also add an explicit test of using
response files with llvm-nm.
Differential Revision: https://reviews.llvm.org/D53064
llvm-svn: 344222
The case will randomly fail if we test it with command "
while llvm-lit test/tools/gold/X86/cache.ll ; do true; done". It is because the llvmcache-foo file is younger than llvmcache-349F039B8EB076D412007D82778442BED3148C4E and llvmcache-A8107945C65C2B2BBEE8E61AA604C311D60D58D6. But due to timestamp precision reason their timestamp is the same. Given the same timestamp, the file prune policy is to remove bigger size file first, so mostly foo file is removed for its bigger size. And the files size is under threshold after deleting foo file. That's what test case expect.
However sometimes, the precision is enough to measure that timestamp of llvmcache-349F039B8EB076D412007D82778442BED3148C4E and llvmcache-A8107945C65C2B2BBEE8E61AA604C311D60D58D6 are smaller than foo, so llvmcache-349F039B8EB076D412007D82778442BED3148C4E and llvmcache-A8107945C65C2B2BBEE8E61AA604C311D60D58D6 are deleted first. Since the files size is still above the file size threshold after deleting the 2 files, the foo file is also deleted. And then the test case fails, because it expect only one file should be deleted instead of 3.
The fix is to change the timestamp of llvmcache-foo file to meet the thinLTO prune policy.
Patch by Luo Yuanke.
Differential Revision: https://reviews.llvm.org/D52452
llvm-svn: 344158
These should test all the optimizable moves on Jaguar.
A follow-up patch will teach how to recognize these optimizable register moves.
llvm-svn: 344144
When fillMachineFunction generates a return on targets without a return opcode
(such as AArch64) it should pass an empty set of registers as the return
registers, not 0 which means register number zero.
Differential Revision: https://reviews.llvm.org/D53074
llvm-svn: 344139
Summary:
Before, "[options] <inputs>" is unconditionally appended to the `Name` parameter. It is more flexible to change its semantic to `Usage` and let user customize the usage line.
% llvm-objcopy
...
USAGE: llvm-objcopy <input> [ <output> ] [options] <inputs>
With this patch:
% llvm-objcopy
...
USAGE: llvm-objcopy input [output]
Reviewers: rupprecht, alexshap, jhenderson
Reviewed By: rupprecht
Subscribers: jakehehrlich, mehdi_amini, steven_wu, dexonsmith, llvm-commits
Differential Revision: https://reviews.llvm.org/D51009
llvm-svn: 344097
Summary:
The POSIX spec says:
```
If the −t option is used with the −v option, the standard output format shall be:
"%s %u/%u %u %s %d %d:%d %d %s\n", <member mode>, <user ID>,
<group ID>, <number of bytes in member>,
<abbreviated month>, <day-of-month>, <hour>,
<minute>, <year>, <file>
where:
...
<abbreviated month>
Equivalent to the format of the %b conversion specification format in date.
<day-of-month>
Equivalent to the format of the %e conversion specification format in date.
<hour> Equivalent to the format of the %H conversion specification format in date.
<minute> Equivalent to the format of the %M conversion specification format in date.
<year> Equivalent to the format of the %Y conversion specification format in date.
```
This actually used to be the format printed by llvm-ar. It was apparently accidentally changed (see r207385 followed by comments in r207387). This makes it conform to GNU ar for easier replacement.
Reviewers: MaskRay
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D52940
llvm-svn: 343901
This matches the output of binutils' nm and ensures that any scripts
or tools that use nm and expect empty output in case there no symbols
don't break.
Differential Revision: https://reviews.llvm.org/D52943
llvm-svn: 343887
DWARF v5 introduces DW_AT_call_all_calls, a subprogram attribute which
indicates that all calls (both regular and tail) within the subprogram
have call site entries. The information within these call site entries
can be used by a debugger to populate backtraces with synthetic tail
call frames.
Tail calling frames go missing in backtraces because the frame of the
caller is reused by the callee. Call site entries allow a debugger to
reconstruct a sequence of (tail) calls which led from one function to
another. This improves backtrace quality. There are limitations: tail
recursion isn't handled, variables within synthetic frames may not
survive to be inspected, etc. This approach is not novel, see:
https://gcc.gnu.org/wiki/summit2010?action=AttachFile&do=get&target=jelinek.pdf
This patch adds an IR-level flag (DIFlagAllCallsDescribed) which lowers
to DW_AT_call_all_calls. It adds the minimal amount of DWARF generation
support needed to emit standards-compliant call site entries. For easier
deployment, when the debugger tuning is LLDB, the DWARF requirement is
adjusted to v4.
Testing: Apart from check-{llvm, clang}, I built a stage2 RelWithDebInfo
clang binary. Its dSYM passed verification and grew by 1.4% compared to
the baseline. 151,879 call site entries were added.
rdar://42001377
Differential Revision: https://reviews.llvm.org/D49887
llvm-svn: 343883
Currently we hardcode instructions with ReadAfterLd if the register operands don't need to be available until the folded load has completed. This doesn't take into account the different load latencies of different memory operands (PR36957).
This patch adds a ReadAfterFold def into X86FoldableSchedWrite to replace ReadAfterLd, allowing us to specify the load latency at a scheduler class level.
I've added ReadAfterVec*Ld classes that match the XMM/Scl, XMM and YMM/ZMM WriteVecLoad classes that we currently use, we can tweak these values in future patches once this infrastructure is in place.
Differential Revision: https://reviews.llvm.org/D52886
llvm-svn: 343868
A `defined(NDEBUG) && !defined(LLVM_ENABLE_DUMP)` build does not call
writeEscaped and there will be no `SBWriteZeroLatency` in the output.
llvm-svn: 343751
Summary:
GNU nm (and other nm implementations, such as "go tool nm") prints an explicit "no symbols" message when an object file has no symbols. Currently llvm-nm just doesn't print anything. Adding an explicit "no symbols" message will allow llvm-nm to be used in place of nm: some scripts and build processes use `nm <file> | grep "no symbols"` as a test to see if a file has no symbols. It will also be more familiar to anyone used to nm.
That said, the format implemented here is slightly different, in that it doesn't print the tool name in the message (which IMHO is not useful to include).
Demo:
```
$ for nm in nm bin/llvm-nm ; do echo "nm implementation: $nm"; $nm /tmp/foo{1,2}.o; echo; done
nm implementation: nm
/tmp/foo1.o:
nm: /tmp/foo1.o: no symbols
/tmp/foo2.o:
0000000000000000 T foo2
nm implementation: bin/llvm-nm
/tmp/foo1.o:
no symbols
/tmp/foo2.o:
0000000000000000 T foo2
```
Reviewers: MaskRay
Reviewed By: MaskRay
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D52810
llvm-svn: 343742
This patch teaches class RegisterFile how to analyze register writes from
instructions that are move elimination candidates.
In particular, it teaches it how to check if a move can be effectively eliminated
by the underlying PRF, and (if necessary) how to perform move elimination.
The long term goal is to allow processor models to describe instructions that
are valid move elimination candidates.
The idea is to let register file definitions in tablegen declare if/when moves
can be eliminated.
This patch is a non functional change.
The logic that performs move elimination is currently disabled. A future patch
will add support for move elimination in the processor models, and enable this
new code path.
llvm-svn: 343691
I was expecting this to be a nfc but Silvermont seems to be setup a little differently:
// A folded store needs a cycle on MEC_RSV for the store data, but it does not need an extra port cycle to recompute the address.
def : WriteRes<WriteRMW, [SLM_MEC_RSV]>;
So moving from WriteStore to WriteRMW reduces predicted port pressure, confirmed by @craig.topper that this is correct.
Differential Revision: https://reviews.llvm.org/D52740
llvm-svn: 343670
These work a little differently because they are actually in
the globals stream and are treated as symbol records, even though
DIA presents them as types. So this also adds the necessary
infrastructure to cache records that live somewhere other than
the TPI stream as well.
llvm-svn: 343507
This patch adds another variant class to identify zero-idiom VPERM2F128rr
instructions.
On Jaguar, a VPERM wih bit 3 and 7 of the mask set, is a zero-idiom.
Differential Revision: https://reviews.llvm.org/D52663
llvm-svn: 343452
Summary: I had added support for compressing dwarf sections in a prior commit,
this one adds support for decompressing. Usage is:
llvm-objcopy --decompress-debug-sections input.o output.o
Reviewers: jakehehrlich, jhenderson, alexshap
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D51841
llvm-svn: 343451
Summary:
While looking at PR35606, I found out that the scheduling info is incorrect.
One can check that it's really a P5+P6 and not a 2*P56 with:
echo -e 'vzeroall\nvandps %xmm1, %xmm2, %xmm3' | ./bin/llvm-exegesis -mode=uops -snippets-file=-
(vandps executes on P5 only)
Reviewers: craig.topper, RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D52541
llvm-svn: 343447
We don't correctly model the latency and resource usage information for
zero-idiom VPERM2F128rr on Jaguar.
This is demonstrated by the incorrect numbers in the resource pressure view, and
the timeline view.
A follow up patch will fix this problem.
llvm-svn: 343346
If any prefixes have been specified on the RUN lines that do not end up
ever actually getting printed, raise an Error. This is either an
indication that the run lines just need cleaning up, or that something
is more fundamentally wrong with the test.
Also raise an Error if there are any blocks which cannot be checked
because they are not uniquely covered by a prefix.
Fixed up a couple of tests where the extra checking flagged up issues.
Differential Revision: https://reviews.llvm.org/D48276
llvm-svn: 343332
Insert empty blocks to cause the positions of matching blocks to match
across lists where possible so that later stages of the algorithm can
actually identify them as being identical.
Regenerated all tests with this change.
Differential Revision: https://reviews.llvm.org/D52560
llvm-svn: 343331
- Add fix so that all code paths that create DWARFContext
with an ObjectFile initialise the target architecture in the context
- Add an assert that the Arch is known in the Dwarf CallFrameString method
llvm-svn: 343317
Summary: The key is now the resource name, not the resource id.
Reviewers: gchatelet
Subscribers: tschuett, RKSimon, llvm-commits
Differential Revision: https://reviews.llvm.org/D52607
llvm-svn: 343208
Summary:
THis is a backwards-compatible change (existing files will work as
expected).
See PR39082.
Reviewers: gchatelet
Subscribers: tschuett, llvm-commits
Differential Revision: https://reviews.llvm.org/D52546
llvm-svn: 343108
As suggested by Craig Topper - I'm going to look at cleaning up the RMW sequences instead.
The uops are slightly different to the register variant, so requires a +1uop tweak
llvm-svn: 342969
Summary:
Right now we only have unit tests. This will allow testing the whole
tool. Even though We can't really check actual values, this will avoid
regressions such as PR39055.
Reviewers: gchatelet, alexshap
Subscribers: mgorny, tschuett, llvm-commits
Differential Revision: https://reviews.llvm.org/D52407
llvm-svn: 342953
Split WriteIMul by size and also by IMUL multiply-by-imm and multiply-by-reg cases.
This removes all the scheduler overrides for gpr multiplies and stops WriteMULH being ignored for BMI2 MULX instructions.
llvm-svn: 342892
LSan can be enabled by itself or as part of the address sanitizer.
Rather than checking the enabled sanitizers for both, just set the LSan
env options whenever a sanitizer is enabled.
llvm-svn: 342881
Confirmed with Craig Topper - fix a typo that was missing a Port4 uop for ROR*mCL instructions on some Intel models.
Yet another step on the scheduler model cleanup marathon......
llvm-svn: 342846
The SandyBridge model was missing schedule values for the RCL/RCR values - instead using the (incredibly optimistic) WriteShift (now WriteRotate) defaults.
I've added overrides with more realistic (slow) values, based on a mixture of Agner/instlatx64 numbers and what later Intel models do as well.
This is necessary to allow WriteRotate to be updated to remove other rotate overrides.
It'd probably be a good idea to investigate a WriteRotateCarry class at some point but its not high priority given the unusualness of these instructions.
llvm-svn: 342842
Instead of indexing local variables by DIE offset, use the variable
name + the path through the lexical block tree. This makes the lookup
key consistent across duplicate abstract origins in different CUs.
llvm-svn: 342776
This patch introduces a SchedWriteVariant to describe zero-idiom VXORP(S|D)Yrr
and VANDNP(S|D)Yrr.
This is a follow-up of r342555.
On Jaguar, a VXORPSYrr is 2 macro opcodes. Only one opcode is eliminated at
register-renaming stage. The other opcode has to be executed to set the upper
half of the destination YMM.
Same for VANDNP(S|D)Yrr.
Differential Revision: https://reviews.llvm.org/D52347
llvm-svn: 342728
This suppresses CoreFoundation originated leaks in the dsymutil tests.
I'm not sure if this is a false positive or not, but either way we don't
have control over it and shouldn't keep the bot red.
http://lab.llvm.org:8080/green/job/clang-stage2-cmake-RgSan/
llvm-svn: 342724
This extends the verifier to catch three new errors:
* Missing DW_AT_type attributes for DW_TAG_formal_parameter,
DW_TAG_variable and DW_TAG_array_type.
* Valid references for DW_AT_type pointing to a non-type tag.
Differential revision: https://reviews.llvm.org/D52223
llvm-svn: 342713
Verify that DW_AT_specification and DW_AT_abstract_origin reference a
DIE with a compatible tag.
Differential revision: https://reviews.llvm.org/D38719
llvm-svn: 342712
Summary:
Implement --version for objcopy and strip.
I think there are LLVM utilities that automatically handle this, but that doesn't seem to work with custom parsing since this binary handles both objcopy and strip, so it uses custom parsing.
This fixes PR38298
Reviewers: jhenderson, alexshap, jakehehrlich
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D52328
llvm-svn: 342702
Summary:
The goal of this patch is to have the same behaviour than gcc-gcov.
Currently the hit counts for a line is the sum of the counts for each block on that line.
The idea is to detect the cycles in the graph of blocks in using the algorithm by Hawick & James.
The count for a cycle is the min of the counts for each edge in the cycle.
Once we've the count for each cycle, we can sum them and add the transition counts of those cycles.
Fix both https://bugs.llvm.org/show_bug.cgi?id=38065 and https://bugs.llvm.org/show_bug.cgi?id=38066
Reviewers: marco-c, davidxl
Reviewed By: marco-c
Subscribers: vsk, lebedev.ri, sylvestre.ledru, dblaikie, llvm-commits
Differential Revision: https://reviews.llvm.org/D49659
llvm-svn: 342657
This patch adds the ability for processor models to describe dependency breaking
instructions.
Different processors may specify a different set of dependency-breaking
instructions.
That means, we cannot assume that all processors of the same target would use
the same rules to classify dependency breaking instructions.
The main goal of this patch is to provide the means to describe dependency
breaking instructions directly via tablegen, and have the following
TargetSubtargetInfo hooks redefined in overrides by tabegen'd
XXXGenSubtargetInfo classes (here, XXX is a Target name).
```
virtual bool isZeroIdiom(const MachineInstr *MI, APInt &Mask) const {
return false;
}
virtual bool isDependencyBreaking(const MachineInstr *MI, APInt &Mask) const {
return isZeroIdiom(MI);
}
```
An instruction MI is a dependency-breaking instruction if a call to method
isDependencyBreaking(MI) on the STI (TargetSubtargetInfo object) evaluates to
true. Similarly, an instruction MI is a special case of zero-idiom dependency
breaking instruction if a call to STI.isZeroIdiom(MI) returns true.
The extra APInt is used for those targets that may want to select which machine
operands have their dependency broken (see comments in code).
Note that by default, subtargets don't know about the existence of
dependency-breaking. In the absence of external information, those method calls
would always return false.
A new tablegen class named STIPredicate has been added by this patch to let
processor models classify instructions that have properties in common. The idea
is that, a MCInstrPredicate definition can be used to "generate" an instruction
equivalence class, with the idea that instructions of a same class all have a
property in common.
STIPredicate definitions are essentially a collection of instruction equivalence
classes.
Also, different processor models can specify a different variant of the same
STIPredicate with different rules (i.e. predicates) to classify instructions.
Tablegen backends (in this particular case, the SubtargetEmitter) will be able
to process STIPredicate definitions, and automatically generate functions in
XXXGenSubtargetInfo.
This patch introduces two special kind of STIPredicate classes named
IsZeroIdiomFunction and IsDepBreakingFunction in tablegen. It also adds a
definition for those in the BtVer2 scheduling model only.
This patch supersedes the one committed at r338372 (phabricator review: D49310).
The main advantages are:
- We can describe subtarget predicates via tablegen using STIPredicates.
- We can describe zero-idioms / dep-breaking instructions directly via
tablegen in the scheduling models.
In future, the STIPredicates framework can be used for solving other problems.
Examples of future developments are:
- Teach how to identify optimizable register-register moves
- Teach how to identify slow LEA instructions (each subtarget defining its own
concept of "slow" LEA).
- Teach how to identify instructions that have undocumented false dependencies
on the output registers on some processors only.
It is also (in my opinion) an elegant way to expose knowledge to both external
tools like llvm-mca, and codegen passes.
For example, machine schedulers in LLVM could reuse that information when
internally constructing the data dependency graph for a code region.
This new design feature is also an "opt-in" feature. Processor models don't have
to use the new STIPredicates. It has all been designed to be as unintrusive as
possible.
Differential Revision: https://reviews.llvm.org/D52174
llvm-svn: 342555
This diff adds -S as an alias for --strip-all-gnu
(for compatibility with binutils' objcopy).
Patch by Dmitry Golovin!
Test plan: make check-all
Differential revision: https://reviews.llvm.org/D52163
llvm-svn: 342364
add a tool to generate symbol remapping files.
Summary:
The new tool llvm-cxxmap builds a symbol mapping table from a file containing
a description of partial equivalences to apply to mangled names and files
containing old and new symbol tables.
Reviewers: davidxl
Subscribers: mgorny, llvm-commits
Differential Revision: https://reviews.llvm.org/D51470
llvm-svn: 342168
Submitted on behalf of Armando Montanez (amontanez@google.com).
Objects with unused program headers copied by objcopy would always have
nonzero values for program header offset and program header entry size.
While technically valid, this atypical behavior triggers warnings in some
tools. This change sets the two fields to zero when the program header is
unused, better fitting the general expectations for unused program header
data.
Section headers behaved somewhat similarly (though only with the entry size),
and are fixed in this revision as well.
Differential Revision: https://reviews.llvm.org/D51961
llvm-svn: 342065
For some reason, llvm-objdump defaults to -arch=i386 on this system while
the test checks x86_64 output. Explicitly pass -arch=x86_64.
llvm-svn: 341944
Summary:
This more correctly reflects the data written by the FDR mode runtime.
This is a continuation of the work in D50441.
Reviewers: mboerger, eizan
Subscribers: hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D51911
llvm-svn: 341905
Summary:
In this change, we implement a `BlockPrinter` which orders records in a
Block that's been indexed by the `BlockIndexer`. This is used in the
`llvm-xray fdr-dump` tool which ties together the various types and
utilities we've been working on, to allow for inspection of XRay FDR
mode traces both with and without verification.
This change is the final step of the refactoring of D50441.
Reviewers: mboerger, eizan
Subscribers: mgorny, hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D51846
llvm-svn: 341887
Third Attempt:
- Alignment issues resolved.
- zlib::isAvailable() detected.
- ArrayRef misuse fixed.
Usage:
llvm-objcopy --compress-debug-sections=zlib foo.o
llvm-objcopy --compress-debug-sections=zlib-gnu foo.o
In both cases the debug section contents is compressed with zlib. In the GNU
style case the header is the "ZLIB" magic string followed by the uint64 big-
endian decompressed size. In the non-GNU mode the header is the
Elf(32|64)_Chdr.
Decompression support is coming soon.
Differential Revision: https://reviews.llvm.org/D49678
llvm-svn: 341635
Second Attempt. Alignment issues resolved. zlib::isAvailable() detected.
Usage:
llvm-objcopy --compress-debug-sections=zlib foo.o
llvm-objcopy --compress-debug-sections=zlib-gnu foo.o
In both cases the debug section contents is compressed with zlib. In the GNU
style case the header is the "ZLIB" magic string followed by the uint64 big-
endian decompressed size. In the non-GNU mode the header is the
Elf(32|64)_Chdr.
Decompression support is coming soon.
Differential Revision: https://reviews.llvm.org/D49678
llvm-svn: 341607
It caused ambiguity between llvm:🆑:Optional and llvm::Optional, which
has been fixed by dropping `using namespace cl;` in favor of explicit
cl:: qualified names.
llvm-svn: 341586
MRI scripts have two comment chars, * and ;, but only the latter was
supported before.
Also allow leading spaces before comment chars (and before any command
string), and allow comments after a command.
Differential Revision: https://reviews.llvm.org/D51338
llvm-svn: 341571
Summary:
Allow strip to be called on multiple input files, which is interpreted as stripping N files in place. Using multiple input files is incompatible with -o.
To allow this, create a `DriverConfig` struct which just wraps a list of `CopyConfigs`. objcopy will only ever have a single `CopyConfig`, but strip will have N (where N >= 1) CopyConfigs.
Reviewers: alexshap, jakehehrlich
Reviewed By: alexshap, jakehehrlich
Subscribers: MaskRay, jakehehrlich, llvm-commits
Differential Revision: https://reviews.llvm.org/D51660
llvm-svn: 341464
Summary:
Fixes the error "Link field value 0 in section .rela.plt is invalid" when copying/stripping certain binaries. Minimal repro:
```
$ cat /tmp/a.c
int main() { return 0; }
$ clang -static /tmp/a.c -o /tmp/a
$ llvm-strip /tmp/a -o /tmp/b
llvm-strip: error: Link field value 0 in section .rela.plt is invalid.
```
Reviewers: jakehehrlich, alexshap
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D51493
llvm-svn: 341419
The -diff option makes it easy to diff dwarf by hiding addresses and
offsets. However not all of them were hidden, which should be fixed by
this patch.
Differential revision: https://reviews.llvm.org/D51593
llvm-svn: 341377
Also reverts follow-up commits r341343 and r341344.
The primary commit continues to break some build bots even after the
fixes in r341343 for UBSan issues:
http://lab.llvm.org:8011/builders/clang-cmake-aarch64-full/builds/5823
It is also failing for me locally (linux, x86-64).
llvm-svn: 341360
Usage:
llvm-objcopy --compress-debug-sections=zlib foo.o
llvm-objcopy --compress-debug-sections=zlib-gnu foo.o
In both cases the debug section contents is compressed with zlib. In the GNU
style case the header is the "ZLIB" magic string followed by the uint64 big-
endian decompressed size. In the non-GNU mode the header is the
Elf(32|64)_Chdr.
Decompression support is coming soon.
Differential Revision: https://reviews.llvm.org/D49678
llvm-svn: 341342
A ReadAdvance was incorrectly added to the SchedReadWrite list associated with
the following SSE instructions:
sqrtss
sqrtsd
rsqrtss
rcpss
As a consequence, a wrong operand latency was computed for the register operand
used as the base address of the folded load operand.
This patch removes the wrong ReadAdvance, and updates the llvm-mca test cases.
There is still a problem with correctly modeling partial register writes on XMM
registers This other problem is currently tracked here:
https://bugs.llvm.org/show_bug.cgi?id=38813
Differential Revision: https://reviews.llvm.org/D51542
llvm-svn: 341326
According to the standard, for the .debug_names (the "dwarf accelerator
tables"):
> If a subprogram or inlined subroutine is included, and has a
> DW_AT_linkage_name attribute, there will be an additional index entry
> for the linkage name.
For Swift we generate DW_structure_types with a linkage name and the
verifier was incorrectly rejecting this. This patch fixes that by only
considering the linkage name in those particular cases. The test is the
"reduced" debug info of the failing swift test on swift.org.
Differential revision: https://reviews.llvm.org/D51420
llvm-svn: 341311
Following D50807, and heading towards D50664, this intermediary change does the following:
1. Upgrade all custom Error types in llvm/trunk/lib/DebugInfo/ to use the new StringError behavior (D50807).
2. Implement std::is_error_code_enum and make_error_code() for DebugInfo error enumerations.
3. Rename GenericError -> PDBError (the file will be renamed in a subsequent commit)
4. Update custom error messages to follow the same formatting: (\w\s*)+\.
5. Keep generic "file not found" (ENOENT) errors as they are in PDB code. Previously, there used to be a custom enumeration for that purpose.
6. Remove a few extraneous LF in log() implementations. Printing LF is a responsability at a higher level, not at the error level.
Differential Revision: https://reviews.llvm.org/D51499
llvm-svn: 341228
The presence of a ReadAdvance for input operand #0 is problematic
because it changes the input latency of the register used as the base address
for the folded load.
A broadcast cannot start executing if the load address hasn't been computed yet.
In the llvm-mca example, the VBROADCASTSS is dependent on the address generated
by the LEAQ. That means, it cannot start until LEAQ reaches the write-back
stage. If we apply ReadAdvance, then we wrongly assume that the load can start 3
cycles in advance.
Differential Revision: https://reviews.llvm.org/D51534
llvm-svn: 341222
According to the timeline view, sqrtss/sd/rcpss start executing before the load
address for the memory operand is available.
This problem is caused by the presence of a ReadAfterLd (a ReadAdvance). Those
unary operations should not specify a ReadAdvance at all.
llvm-svn: 341213
When using -g and -dsym, llvm-objdump opens the dsym file and keeps the
MachOObjectFile alive, while the memory buffer that the MachOObjectFile
was based on gets destroyed.
Differential Revision: https://reviews.llvm.org/D51365
llvm-svn: 341209
This patch fixes the number of micro opcodes, and processor resource cycles for
the following AVX instructions:
vinsertf128rr/rm
vperm2f128rr/rm
vbroadcastf128
Tests have been regenerated using the usual scripts in the llvm/utils directory.
Differential Revision: https://reviews.llvm.org/D51492
llvm-svn: 341185
forward declarations.
Especially with template instantiations, there are legitimate reasons
why for declarations might be emitted into a DW_TAG_module skeleton /
forward-declaration sub-tree, that are not forward declarations in the
sense of that there is a more complete definition over in a .pcm file.
The example in the testcase is a constant DW_TAG_member of a
DW_TAG_class template instatiation.
rdar://problem/43623196
llvm-svn: 341123
This patch introduces the following changes to the DispatchStatistics view:
* DispatchStatistics now reports the number of dispatched opcodes instead of
the number of dispatched instructions.
* The "Dynamic Dispatch Stall Cycles" table now also reports the percentage of
stall cycles against the total simulated cycles.
This change allows users to easily compare dispatch group sizes with the
processor DispatchWidth.
Before this change, it was difficult to correlate the two numbers, since
DispatchStatistics view reported numbers of instructions (instead of opcodes).
DispatchWidth defines the maximum size of a dispatch group in terms of number of
micro opcodes.
The other change introduced by this patch is related to how DispatchStage
generates "instruction dispatch" events.
In particular:
* There can be multiple dispatch events associated with a same instruction
* Each dispatch event now encapsulates the number of dispatched micro opcodes.
The number of micro opcodes declared by an instruction may exceed the processor
DispatchWidth. Therefore, we cannot assume that instructions are always fully
dispatched in a single cycle.
DispatchStage knows already how to handle instructions declaring a number of
opcodes bigger that DispatchWidth. However, DispatchStage always emitted a
single instruction dispatch event (during the first simulated dispatch cycle)
for instructions dispatched.
With this patch, DispatchStage now correctly notifies multiple dispatch events
for instructions that cannot be dispatched in a single cycle.
A few views had to be modified. Views can no longer assume that there can only
be one dispatch event per instruction.
Tests (and docs) have been updated.
Differential Revision: https://reviews.llvm.org/D51430
llvm-svn: 341055
The restoreDateOnFile() method used to preserve dates uses sys::fs::openFileForWrite(). That method defaults to opening files with CD_CreateAlways, which truncates the output file if it exists. Use CD_OpenExisting instead to open it and *not* truncate it, which also has the side benefit of erroring if the file does not exist (it should always exist, because we just wrote it out).
Also, fix the test case to make sure the output is a valid output file, and not empty. The extra test assertions are enough to catch this regression.
llvm-svn: 340996
This patch adds two new fields to the perf report generated by the SummaryView.
Fields are now logically organized into two small groups; only the second group
contains throughput indicators.
Example:
```
Iterations: 100
Instructions: 300
Total Cycles: 414
Total uOps: 700
Dispatch Width: 4
uOps Per Cycle: 1.69
IPC: 0.72
Block RThroughput: 4.0
```
This patch also updates the docs for llvm-mca.
Due to the nature of this change, several tests in the tools/llvm-mca directory
were affected, and had to be updated using script `update_mca_test_checks.py`.
llvm-svn: 340946
This patch also uses colors to highlight problematic wait-time entries.
A problematic entry is an entry with an high wait time that tends to match (or
exceed) the size of the scheduler's buffer.
Color RED is used if an instruction had to wait an average number of cycles
which is bigger than (or equal to) the size of the underlying scheduler's
buffer.
Color YELLOW is used if the time (in cycles) spend waiting for the
operands or pipeline resources is bigger than half the size of the underlying
scheduler's buffer.
Color MAGENTA is used if an instruction does not consume buffer resources
according to the scheduling model.
llvm-svn: 340825
This patch issues an error message if Darwin ABI is attempted with the PPC
backend. It also cleans up existing test cases, either converting the test to
use an alternative triple or removing the test if the coverage is no longer
needed.
Updated Tests
-------------
The majority of test cases were updated to use a different triple that does not
include the Darwin ABI. Many tests were also updated to use FileCheck, in place
of grep.
Deleted Tests
-------------
llvm/test/tools/dsymutil/PowerPC/sibling.test was originally added to test
specific functionality of dsymutil using an object file created with an old
version of llvm-gcc for a Powerbook G4. After a discussion with @JDevlieghere he
suggested removing the test.
llvm/test/CodeGen/PowerPC/combine_loads_from_build_pair.ll was converted from a
PPC test to a SystemZ test, as the behavior is also reproducible there.
All other tests that were deleted were specific to the darwin/ppc ABI and no
longer necessary.
Phabricator Review: https://reviews.llvm.org/D50988
llvm-svn: 340795
Before this patch, the SchedulerStatistics only printed the maximum number of
buffer entries consumed in each scheduler's queue at a given point of the
simulation.
This patch restructures the reported table, and adds an extra field named
"Average number of used buffer entries" to it.
This patch also uses different colors to help identifying bottlenecks caused by
high scheduler's buffer pressure.
llvm-svn: 340746
When used in cross-DSO mode, CFI will generate calls to special functions rather than trap instructions. For example, instead of generating
if (!InlinedFastCheck(f))
abort();
call *f
CFI generates
if (!InlinedFastCheck(f))
__cfi_slowpath(CallSiteTypeId, f);
call *f
This patch teaches cfi-verify to recognize calls to __cfi_slowpath and abort and treat them as trap functions.
In addition to normal symbols, we also parse the dynamic relocations to handle cross-DSO calls in libraries.
We also extend cfi-verify to recognize other patterns that occur using cross-DSO. For example, some indirect calls are not guarded by a branch to a trap but instead follow a call to __cfi_slowpath. For example:
if (!InlinedFastCheck(f))
call *f
else {
__cfi_slowpath(CallSiteTypeId, f);
call *f
}
In this case, the second call to f is not marked as protected by the current code. We thus recognize if indirect calls directly follow a call to a function that will trap on CFI violations and treat them as protected.
We also ignore indirect calls in the PLT, since on AArch64 each entry contains an indirect call that should not be protected by CFI, and these are labeled incorrectly when debug information is not present.
Differential Revision: https://reviews.llvm.org/D49383
llvm-svn: 340612
Per LLVM's CommandGuide, llvm-profdata show -text is supposed to produce
textual output that can be passed as input to further llvm-profdata
invocations. This previously didn't work for two reasons:
1) -text was not sufficient to enable the machine-readable text format output;
instead, -text was effectively ignored if -counts was not also specified. (With
this patch, -counts is instead ignored if -text is specified, because the
machine-readable text format always includes counts.)
2) When the input data was an IR-level profile, the :ir marker was missing from
the output, resulting in a text format output that would not be usable as
profiling data due to function hash mismatches.
Differential Revision: https://reviews.llvm.org/D51188
llvm-svn: 340592
Summary: This is to be consistent with lld behavior since rLLD340364.
Reviewers: tejohnson
Reviewed By: tejohnson
Subscribers: steven_wu, eraman, mehdi_amini, inglorion, dexonsmith, llvm-commits
Differential Revision: https://reviews.llvm.org/D51060
llvm-svn: 340380
Summary:
Port GNU Objcopy -G/--keep-global-symbol(s).
This is slightly different than the already-implemented --globalize-symbol, which marks a symbol as global when copying. When --keep-global-symbol (alias -G) is used, *only* those symbols marked will stay global, and all other globals are demoted to local. (Also note that it doesn't *promote* a symbol to global). Additionally, there is a pluralized version of the flag --keep-global-symbols, which effectively applies --keep-global-symbol for every non-comment in a file.
Reviewers: jakehehrlich, jhenderson, alexshap
Reviewed By: jhenderson
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D50589
llvm-svn: 340105
Summary:
The -I (--input-target) and -B (--binary-architecture) flags exist but are currently silently ignored. This adds support for -I binary for architectures i386, x86-64 (and alias i386:x86-64), arm, aarch64, sparc, and ppc (powerpc:common64). This is largely based on D41687.
This is done by implementing an additional subclass of Reader, BinaryReader, which works by interpreting the input file as contents for .data field, sets up a synthetic header, and adds additional sections/symbols (e.g. _binary__tmp_data_txt_start).
Reviewers: jakehehrlich, alexshap, jhenderson, javed.absar
Reviewed By: jhenderson
Subscribers: jyknight, nemanjai, kbarton, fedor.sergeev, jrtc27, kristof.beyls, paulsemel, llvm-commits
Differential Revision: https://reviews.llvm.org/D50343
llvm-svn: 340070
If a relocation group doesn't have the RELOCATION_GROUP_HAS_ADDEND_FLAG set, then this implies the group's addend equals zero.
In this case android packed format won't encode an explicit addend delta, instead we need to set Addend, the "previous addend" variable, to zero by ourself.
Patch by Yi-Yo Chiang!
Differential Revision: https://reviews.llvm.org/D50601
llvm-svn: 339799
This allows to set custom Info field value for SHT_GROUP sections.
It is useful to allow this because we would be able to replace at least one binary
object committed in LLD and replace it with the yaml2obj based test.
Differential revision: https://reviews.llvm.org/D50776
llvm-svn: 339772
Martin Storsjo