Change the format type of Dyn.SONameOffset to PRIx64 since it is a uint64_t.
The problem was detected on mips builds, where it was printing junk values
and causing test failure.
Patch by Milos Stojanovic.
Differential Revision: https://reviews.llvm.org/D57676
llvm-svn: 353225
https://reviews.llvm.org/D57608
It's a common pattern in GISel to have a MachineInstrBuilder from which we get various regs
(commonly MIB->getOperand(0).getReg()). This adds a helper method and the above can be
replaced with MIB.getReg(0).
llvm-svn: 353223
We now print the implicit %st register on these instruction, but since they occur at the end of the line, FileCheck didn't see they were missing.
llvm-svn: 353222
There is no reason for these sections to remain separate in the final
DLL or EXE.
I have not yet added a InstrProfilingPlatformWindows.c for these, since
avoiding dynamic profile data registration is a larger project for
later.
llvm-svn: 353221
Summary:
Before r349976, MC ignored such directives when producing an object file
and asserted when re-producing textual assembly output. I turned this
assertion into a hard error in both cases in r349976, but this makes it
unnecessarily difficult to write a single assembly file that supports
both MachO and other object formats that support .file. A user reported
this as PR40578, and we decided to go back to ignoring the directive.
Fixes PR40578
Reviewers: mstorsjo
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D57772
llvm-svn: 353218
Summary:
The following patch adds the "None" line to the section to segment mapping dump.
That line lists the sections that do not belong to any segment.
I realize that this change differs from GNU readelf which does not display the latter information.
I'd rather not add this "feature" under a command line option. I think that might introduce confusion, since users would have to
make an additional decision as to if they want to see all of the section-to-segment map or just a subset of it.
Another option is to only print the "None" line if the `--section-mapping` option is passed; however,
that might also introduce some confusion, because the section-to-segment map would be different between`--program-headers`
and the `--section-mapping` output. While the difference is just the "None" line, it seems that if we choose to display
the segment-to-section mapping, then we should always display the whole map including the sections
that do not belong to segments.
```
Section to Segment mapping:
Segment Sections...
00
01 .interp
02 .interp .note.ABI-tag .gnu.hash
03 .init_array .fini_array .dynamic
04 .dynamic
05 .note.ABI-tag
06 .eh_frame_hdr
07
08 .init_array .fini_array .dynamic .got
None .comment .symtab .strtab .shstrtab <--- THIS LINE
```
Reviewers: grimar, rupprecht, jhenderson, espindola
Reviewed By: rupprecht
Subscribers: khemant, emaste, arichardson, llvm-commits
Differential Revision: https://reviews.llvm.org/D57700
llvm-svn: 353217
It turns out that I un-XFAILed too many tests in r353210: some tests
actually fail whether exceptions are enabled or not because they use
types that are marked as unavailable even when exceptions are disabled.
llvm-svn: 353215
This is suggested by 3.3.9 of MSP430 EABI document.
We do allow user to manually enable frame pointer. GCC toolchain uses the same behavior.
Patch by Dmitry Mikushev!
Differential Revision: https://reviews.llvm.org/D56925
llvm-svn: 353212
Some tests are marked as failing on platforms where the dylib does not
provide the required exception classes. However, when testing with
exceptions disabled, those tests shouldn't be marked as failing.
llvm-svn: 353210
We're building tests with -nostdlib which means that we need to
explicitly include the builtins library. When using libgcc (default)
we can simply include -lgcc_s on the link line, but when using
compiler-rt builtins we need a complete path to the builtins library.
This path is already available in CMake as <PROJECT>_BUILTINS_LIBRARY,
so we just need to pass that path to lit and if config.compiler_rt is
true, link it to the test.
Prior to this patch, running tests when compiler-rt is being used as
the builtins library was broken as all tests would fail to link, but
with this change running tests when compiler-rt bultins library is
being used should be supported.
Differential Revision: https://reviews.llvm.org/D56701
llvm-svn: 353208
Ensure the XOR in the waterfall loop for indirect addressing is considered a terminator.
Differential Revision: https://reviews.llvm.org/D57703
llvm-svn: 353207
When the whole test only works starting at some version of the Standard,
use UNSUPPORTED lit markup instead of #ifdef TEST_STD_VER. This provides
more visibility into the test suite.
Reviewed as https://reviews.llvm.org/D57704.
Thanks to Andrey Maksimov for the patch.
llvm-svn: 353206
Summary:
Added ability to generate correct debug info data about the variable
address class. Currently, for all the locals and globals the default
values are used, ADDR_local_space(6) for locals and ADDR_global_space(5)
for globals. The values are taken from the table in
https://docs.nvidia.com/cuda/archive/10.0/ptx-writers-guide-to-interoperability/index.html#cuda-specific-dwarf.
We need to emit correct data for address classes of, at least, shared
and constant globals. Currently, all these variables are treated by
the cuda-gdb debugger as the variables in the global address space
and, thus, it require manual data type casting.
Reviewers: echristo, probinson
Subscribers: jholewinski, aprantl, cfe-commits
Differential Revision: https://reviews.llvm.org/D57162
llvm-svn: 353204
Summary:
According to
https://docs.nvidia.com/cuda/archive/10.0/ptx-writers-guide-to-interoperability/index.html#cuda-specific-dwarf,
the compiler should emit the DW_AT_address_class attribute for all
variable and parameter. It means, that DW_AT_address_class attribute
should be used in the non-standard way to support compatibility with the
cuda-gdb debugger.
Clang is able to generate the information about the variable address
class. This information is emitted as the expression sequence
`DW_OP_constu <DWARF Address Space> DW_OP_swap DW_OP_xderef`. The patch
tries to find all such expressions and transform them into
`DW_AT_address_class <DWARF Address Space>` if target is NVPTX and the debugger is gdb.
If the expression is not found, then default values are used. For the
local variables <DWARF Address Space> is set to ADDR_local_space(6), for
the globals <DWARF Address Space> is set to ADDR_global_space(5). The
values are taken from the table in the same section 5.2. CUDA-Specific
DWARF Definitions.
Reviewers: echristo, probinson
Subscribers: jholewinski, aprantl, llvm-commits
Differential Revision: https://reviews.llvm.org/D57157
llvm-svn: 353203
The v2i64 argument is lowered to a bitcast of v4i32 build_vector.
This would then attempt to use the i32-element as the source of the
vector truncate. This really would need to collect 2 elements from the
build_vector to produce the intended truncate.
llvm-svn: 353202
This patch removes some vendor-specific availability XFAILs from the
test suite. In the future, when a new feature is introduced in the
dylib, an availability macro should be created and a matching lit
feature should be created. That way, the test suite can XFAIL whenever
the implementation lacks the necessary feature instead of being
cluttered by vendor-specific annotations.
Right now, those vendor-specific annotations are still somewhat cluttering
the test suite by being in `config.py`, but at least they are localized.
In the future, we could design a way to define those less intrusively or
even automatically based on the availability macros that already exist
in <__config>.
llvm-svn: 353201
rL352997 enabled ZERO_EXTEND from non-shuffle-able value types. I've disabled it for now to fix a regression identified by @asbirlea until I can fix this properly.
llvm-svn: 353198
Change the format type of Value to PRIu64 since it is a uint64_t.
The problem was detected on mips boards building 32-bit binaries,
where it was printing junk values and causing test failure.
Patch by Milos Stojanovic.
Differential Revision: https://reviews.llvm.org/D57583
llvm-svn: 353194
Summary:
Adds the standard gauntlet of accessors for global indirect functions and updates the echo test.
Now it would be nice to have a target abstraction so one could know if they have access to a suitable ELF linker and runtime.
Reviewers: whitequark, deadalnix
Reviewed By: whitequark
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D56177
llvm-svn: 353193
Type punning through a union -> no good.
double to uint64 to double again -> no good either.
The nice side effect, other than silencing the sanitizer bot
is that it fixes the formatting of some dates, e.g. Jan 1st 1970.
<rdar://problem/47617983>
llvm-svn: 353191
We can't outline BTI instructions, because they need to be the very first
instruction executed after an indirect call or branch. If we outline them, then
an indirect call might go to the branch to the outlined function, which will
fault.
Differential revision: https://reviews.llvm.org/D57753
llvm-svn: 353190
The fix is to issue error messages if there are more than one
teams construct inside a target constructs.
#pragma omp target
{
#pragma omp teams
{ ... }
#pragma omp teams
{ ... }
}
llvm-svn: 353186
Emit{Nounwind,}RuntimeCall{,OrInvoke} have been modified to take a
FunctionCallee as an argument, and CreateRuntimeFunction has been
modified to return a FunctionCallee. All callers have been updated.
Additionally, CreateBuiltinFunction is removed, as it was redundant
with CreateRuntimeFunction after some previous changes.
Differential Revision: https://reviews.llvm.org/D57668
llvm-svn: 353184
edge cases.
Currently, EmitCall emits a call instruction with a function type
derived from the pointee-type of the callee. This *should* be the same
as the type created from the CallInfo parameter, but in some cases an
incorrect CallInfo was being passed.
All of these fixes were discovered by the addition of the assert in
EmitCall which verifies that the passed-in CallInfo matches the
Callee's function type.
As far as I know, these issues caused no bugs at the moment, as the
correct types were ultimately being emitted. But, some would become
problematic when pointee types are removed.
List of fixes:
* arrangeCXXConstructorCall was passing an incorrect value for the
number of Required args, when calling an inheriting constructor
where the inherited constructor is variadic. (The inheriting
constructor doesn't actually get passed any of the user's args, but
the code was calculating it as if it did).
* arrangeFreeFunctionLikeCall was not including the count of the
pass_object_size arguments in the count of required args.
* OpenCL uses other address spaces for the "this" pointer. However,
commonEmitCXXMemberOrOperatorCall was not annotating the address
space on the "this" argument of the call.
* Destructor calls were being created with EmitCXXMemberOrOperatorCall
instead of EmitCXXDestructorCall in a few places. This was a problem
because the calling convention sometimes has destructors returning
"this" rather than void, and the latter function knows about that,
and sets up the types properly (through calling
arrangeCXXStructorDeclaration), while the former does not.
* generateObjCGetterBody: the 'objc_getProperty' function returns type
'id', but was being called as if it returned the particular
property's type. (That is of course the *dynamic* return type, and
there's a downcast immediately after.)
* OpenMP user-defined reduction functions (#pragma omp declare
reduction) can be called with a subclass of the declared type. In
such case, the call was being setup as if the function had been
actually declared to take the subtype, rather than the base type.
Differential Revision: https://reviews.llvm.org/D57664
llvm-svn: 353181
Rong Xu