This patch changes where the C++ ABI headers are put during the build. Previously
they were put in the top level include directory (not the libc++ header directory).
However that just polutes the top level directory. Instead this patch creates a special
directory to put them in. The reason they can't be put under c++/v1 until after the build
is because libc++ uses the in-source headers, so we can't add the include path of the libc++
headers in the object dir.
Additionally this patch teaches the test suite how to find the ABI headers,
and adds a demangling utility to help debug tests with.
llvm-svn: 289195
This patch adds a `check-cxx-abilist` target which verifies the libc++.so ABI
when the current build configuration matches the configuration used to generate
the ABI lists.
In order to make this change `HandleOutOfTreeLLVM.cmake` needed to be modified
to include `LLVMConfig.cmake` so that `TARGET_TRIPLE` is defined. Hopefully
the changes needed to accommodate this won't break existing build
configurations.
llvm-svn: 286789
Adjust the stand-alone build files to accept either CMake files from
LLVM_CMAKE_PATH or from LLVM_MAIN_SRC_DIR instead of requiring both.
This makes it possible to run libcxx tests on top of installed LLVM
and lit, without having to unpack a copy of LLVM sources. Furthermore,
it avoids adding duplicate paths.
Differential Revision: https://reviews.llvm.org/D25093
llvm-svn: 284583
In r280108 I tried to make the headers copy relative to LLVM_BINARY_DIR, and the intent was that it would only happen on in-tree builds or runtimes directory builds. It didn't actually work that way.
This patch adds a check for CMAKE_SOURCE_DIR being equal to CMAKE_CURRENT_SOURCE_DIR. In this case we set a variable LIBCXX_USING_INSTLLED_LLVM. This doesn't necessarily mean the LLVM is installed (it could be a build directory), but it means we need to treat the LLVM directory as read-only.
llvm-svn: 280400
We're compiling libc++ with -nodefaultlibs, so we should also pass this
option during the configuration checks to ensure those checks are
consistent with the actual build.
The primary motivation here is to ease cross-compilation against a
non-standard set of C++ libraries. Previously, the configuration checks
would attempt to link against the standard C++ libraries, which would
cause link failures when cross-compiling, even though the actual library
link would go through correctly (because of the use of -nodefaultlibs
and explicitly specifying any needed libraries). This is more correct
even ignoring the motivation, however.
Patch by Shoaib Meenai!
llvm-svn: 280015
Summary:
The new LLVM runtimes build directory requires some basic conventions across the runtime projects. These changes make libcxx build under the runtimes subdirectory. The general idea of the changes is that the runtimes subdirectory requires some conventions to be consistent across runtime projects.
I expect to have a few more small patches that build on this to tie up check targets and other things useful in development workflows.
Summary of changes in this patch:
* Renamed variable LLVM_CONFIG -> LLVM_CONFIG_PATH
* Renamed variable LIBCXX_BUILT_STANDALONE -> LIBCXX_STANDALONE_BUILD
* Add an include of AddLLVM in the tests subdirectory for add_lit_testsuite.
Reviewers: EricWF
Subscribers: cfe-commits
Differential Revision: https://reviews.llvm.org/D23696
llvm-svn: 279151
This patch updates the way libc++ handles checking for libatomic, in part
to prepare for https://reviews.llvm.org/D22073.
Changes:
* 'LIBCXX_HAS_ATOMIC_LIB' is now set whenever libatomic is available even libc++
doesn't need to manually link it.
* 'LIBCXX_HAVE_CXX_ATOMICS_WITH_LIB' is now used to detect when libatomic
needs to be manually linked.
* 'LIBCXX_HAS_ATOMIC_LIB' now adds 'libatomic' as a available feature in the
test suite.
llvm-svn: 275759
Summary:
This patch changes the libc++ CMake so that it adds certain target flags like '-m32' or '--gcc-toolchain' before including config-ix.cmake.
Since these flags can affect things like check_library_exists([...]) they needed to be added before the tests are performed.
This patch fixes:
https://llvm.org/bugs/show_bug.cgi?id=24322
Reviewers: danalbert, jroelofs, bcraig, compnerd
Subscribers: cfe-commits
Differential Revision: http://reviews.llvm.org/D20887
llvm-svn: 271460
Summary:
Currently libc++experimental builds with C++11. This patch changes that to C++14 when supported by the compiler. Although nothing currently requires C++14 the upcoming <experimental/memory_resource> implementation would benefit from it. [1]
Note that libc++.so continues to build with C++11 and is unaffected by this change.
[1] <experimental/memory_resource> provides global resources which must exist for the entire lifetime of the program. In order to ensure that a global resource can be used during program termination there destructors must never be invoked. The only way to do this, while also allowing "constant initialization", is to use a C++14 union.
Reviewers: mclow.lists
Subscribers: pete, cfe-commits
Differential Revision: http://reviews.llvm.org/D19992
llvm-svn: 269070
This should fix PR26631, PR26622 and has the nice property that the addition
of the CheckLibcxxAtomic.cmake module acts as an NFC on the platforms of the
reporters (at least for the time being).
As these bug reports explain, CMake fails the atomic check because the
include headers might not exist in the host environment. We could
potentially point to the headers provided by libcxx itself.
llvm-svn: 260961
This re-applies commit r260235. However, this time we add -gcc-toolchain
to the compiler's flags when the user has specified the LIBCXX_GCC_TOOLCHAIN
variable.
llvm-svn: 260515
This reverts commit r260235. It breaks LLVM's bootstrap when building
with a -gcc-toolchain and the system's gcc installation does not provide
the libatomic library and its headers. We should check whether
LIBCXX_GCC_TOOLCHAIN is set and adjust the flags accordingly.
llvm-svn: 260323
Summary:
This fixes the tests under std/atomics for 32-bit MIPS CPUs where the
8-byte atomic operations call into the libatomic library.
Reviewers: dsanders, mclow.lists, EricWF, jroelofs, joerg
Subscribers: cfe-commits
Differential Revision: http://reviews.llvm.org/D16613
llvm-svn: 260235
Summary:
This patch turns on `LIBCXX_ENABLE_ABI_LINKER_SCRIPT` by default whenever `LLVM_HAVE_LINK_VERSION_SCRIPT` is ON. This turns out to be whenever:
1. WIN32 is not defined.
2 UNIX is defined.
3. APPLE is not defined.
While `LLVM_HAVE_LINK_VERSION_SCRIPT` is meant to reflect exactly what we are asking I think it's close enough.
After committing this patch Linux users will no longer have to use "-lc++abi" explicitly!
Reviewers: mclow.lists, danalbert, compnerd, jroelofs
Subscribers: emaste, rengolin, cbergstrom, cfe-commits
Differential Revision: http://reviews.llvm.org/D13739
llvm-svn: 250469
C++ macros and CMake options that specify the default ABI version of
the library, and can be overridden to pick up new ABI-changing
features.
llvm-svn: 250254
Summary:
Hi all,
This patch is a successor to D11963. However it has changed dramatically and I felt it would be best to start a new review thread.
Please read the design documentation added in this patch for a description of how it works.
Reviewers: mclow.lists, danalbert, jroelofs, EricWF
Subscribers: vkalintiris, rnk, ed, espositofulvio, asl, eugenis, cfe-commits
Differential Revision: http://reviews.llvm.org/D13407
llvm-svn: 250235
Summary:
On Mac OS X overwriting `/usr/lib/libc++.dylib` can cause your computer to fail to boot. This patch tries to make it harder to do that accidentally.
If `CMAKE_SYSTEM_NAME` is `Darwin` and `CMAKE_INSTALL_PREFIX` is `/usr` don't generate installation rules unless the user explicitly provides `LIBCXX_OVERRIDE_DARWIN_INSTALL=ON`. Note that `CMAKE_INSTALL_PREFIX` is always absolute so we don't need to worry about things like `/usr/../usr`.
Reviewers: mclow.lists, beanz, jroelofs
Subscribers: cfe-commits
Differential Revision: http://reviews.llvm.org/D12209
llvm-svn: 246070
Summary:
This patch adds Sphinx based documentation to libc++. The goal is to make it easier to write documentation for libc++ since writing new documentation in HTML is cumbersome. This patch rewrites the main page for libc++ along with the instructions for using, building and testing libc++.
The built documentation can be found and reviewed here: http://efcs.ca/libcxx-docs
In order to build the sphinx documentation you need to specify the cmake options `-DLLVM_ENABLE_SPHINX=ON -DLIBCXX_INCLUDE_DOCS=ON`. This will add the makefile rule `docs-libcxx-html`.
Reviewers: chandlerc, mclow.lists, danalbert, jroelofs
Subscribers: silvas, cfe-commits
Differential Revision: http://reviews.llvm.org/D12129
llvm-svn: 245788
Summary: Currently you can't install libc++ from within the LLVM tree without installing all of LLVM. This patch adds an install rule for libc++.
Reviewers: mclow.lists, danalbert, jroelofs, EricWF
Subscribers: cfe-commits
Differential Revision: http://reviews.llvm.org/D11697
llvm-svn: 245470
This patch adds the working parts of r243503. The difference with this patch
is that it doesn't include the HandleLLVMOptions.cmake file.
llvm-svn: 243698
This change was reverted in r243550 because it broke clang-format builds
(see PR24306).
This patch recommits a fixed version of the original.
llvm-svn: 243574
Summary:
This patch contains the following changes:
1. Require that libc++ can find a LLVM source directory. This is done the same way as `libc++abi` currently does.
2. Cleanup ugly configuration code in CMakeLists.txt by using `add_flags`, `add_flags_if`, and `add_flags_if_supported` macros.
The goals for this patch are:
1. Help libc++ be more consistent with how LLVM handles CMake options (see PR23670 PR23671).
2. Make it easier to use sanitizers using the `LLVM_USE_SANITIZER` option.
3. Make libc++'s CMakeLists.txt file easier to understand and change.
4. Move towards allowing libc++ to create Sphinx documentation (see http://efcs.ca/libcxx-docs).
5. Move towards allowing libc++ to use other LLVM utilities such as `not` and `FileCheck`.
Reviewers: mclow.lists, jroelofs, danalbert
Subscribers: cfe-commits
Differential Revision: http://reviews.llvm.org/D11308
llvm-svn: 243503
The changes in src/exception.cpp and cmake/Modules/HandleLibCXXABI.cmake fix a
bug when building libc++ with GCC. Because GCC does not support __has_include
we need to explicitly tell it that we are building against libc++abi via the
preprocessor definition `LIBCXX_BUILDING_LIBCXXABI`.
The changes in include/ratio are to work around CWG defect
1712 (constexpr variable template declarations). GCC 4.8 and before has not
adopted the resolution to this defect.
The changes in include/exception work around an issue where is_final is used
without it being defined in type_traits.
llvm-svn: 237767
Summary:
This patch adds configuration to CMake and LIT for running the libc++ test-suite to generate code coverage.
To use code coverage use following instructions.
* Find the clang resource dir using `$CXX -print-search-dirs`. Let <library-dir> be the first library search directory.
* `cmake <regular-options> -DLIBCXX_GENERATE_COVERAGE=ON -DLIBCXX_COVERAGE_LIBRARY=<library-dir>/lib/<platform>/libclang_rt.profile.a <source>`
* `make cxx`
* `make check-libcxx`
* `make generate-libcxx-coverage`
The reason I want this patch upstreamed is so I can setup a bot that generates code coverage and posts in online for every revision.
Reviewers: mclow.lists, jroelofs, danalbert
Reviewed By: danalbert
Differential Revision: http://reviews.llvm.org/D8716
llvm-svn: 233669
Summary:
Clean up all the different possible CMake options for specifying the ABI include paths into one CMake option named `LIBCXX_CXX_ABI_INCLUDE_PATHS`.
The documentation has been updated to reflect this change.
For the next week I have added explicit errors if any of the old flags is used. These errors inform users of the change and the new option to use.
Before committing the change I will announce this change on cfe-dev.
Reviewers: danalbert, mclow.lists
Reviewed By: danalbert, mclow.lists
Subscribers: jroelofs, cbergstrom, cfe-commits
Differential Revision: http://reviews.llvm.org/D5039
llvm-svn: 232762
Summary:
This patch add the CMake option `LIBCXX_ENABLE_STATIC_ABI_LIBRARY` which, when enabled, will link libc++ against the static version of the ABI library.
Reviewers: mclow.lists, jroelofs, danalbert
Reviewed By: danalbert
Subscribers: compnerd, cfe-commits
Differential Revision: http://reviews.llvm.org/D8017
llvm-svn: 231076
Summary:
libc++abi2.exp should be used whenever `cxxabi.h` defines `_LIBCPPABI_VERSION`. This macro was added to libc++abi in 2012 in r149632. For this reason we should use libc++abi2.exp as default unless otherwise specified.
Also when building against an in-tree libc++abi we definitely want to use libc++abi2.exp.
I would love to know what OSX was the last to use libc++abi.exp but I can only test on 10.9.
Reviewers: danalbert, mclow.lists, EricWF
Reviewed By: EricWF
Subscribers: meadori, cfe-commits
Differential Revision: http://reviews.llvm.org/D7773
llvm-svn: 230119
Since we've added a new header to libc++abi (__cxxabi_config.h), we
now have a case where we might not always find all the ABI headers:
building libc++ against the system's libc++abi on Darwin.
Since this isn't actually a fatal error, degrade it to a warning.
llvm-svn: 228720
This isn't actually used for anything, and is broken on Darwin
(currently causing build failures now that the triple is passed to aid
cross compiling). Rather than fix unused code, just remove it.
llvm-svn: 226243
Summary:
This is the second attempt at allowing for the use of libraries that the linker cannot find. The first attempt used `CMAKE_LIBRARY_PATH` and `find_library` to select which ABI library should be used. There were a number of problems with this approach:
- `find_library` didn't work with cmake targets (ie in-tree libcxxabi build)
- It wasn't always possible to determine where `find_library` actually found your library.
- `target_link_libraries` inserted the path of the ABI library into libc++'s RPATH when `find_library` was used.
- Linking libc++ and it's ABI library is a special case. It's a lot easier to keep it simple.
After discussion with @cbergstrum a new approach was decided upon.
This patch achieve the same ends by simply using `LIBCXX_CXX_ABI_LIBRARY_PATH` to specify where to find the library (if the linker won't find it). When this variable is defined it is simply added as a library search path when linking libc++. It is a lot easier to duplicate this behavior in LIT. It also prevents libc++ from being linked with an RPATH.
Reviewers: mclow.lists, cbergstrom, chandlerc, danalbert
Reviewed By: chandlerc, danalbert
Subscribers: chandlerc, cfe-commits
Differential Revision: http://reviews.llvm.org/D5860
llvm-svn: 220157
When libcxx is built in-tree with libcxxabi it links against libcxxabi using
the name of the cmake target and not the actual library name. The cmake target
will not work with `find_library()`, so it needs special case handling.
llvm-svn: 220121
Summary:
This patch adds support for building/testing libc++ with an ABI library that the linker would not normally find.
- `CMAKE_LIBRARY_PATH` is used to specify the list of search directories.
- The ABI library is now found using `find_library` instead of assuming its along the linker's search path.
- `CMAKE_LIBRARY_PATH` is passed to our LIT config as `library_paths`.
- For each path in `library_paths` the following flags are added `-L<path> -Wl,-rpath -Wl,<path>`
Some changes in existing behavior were also added:
- `target_link_libraries` is now passed the ABI library file instead of the library name. Ex `target_link_libraries(cxx "/usr/lib/libc++abi.so")` vs `target_link_libraries(cxx "c++abi")`.
- `-Wl,-rpath -Wl,<path>` is now used on OSX to link to libc++ instead of env['DYLD_LIBRARY_PATH'] if `use_system_lib=False`.
Reviewers: mclow.lists, danalbert, EricWF
Reviewed By: EricWF
Subscribers: emaste, cfe-commits
Differential Revision: http://reviews.llvm.org/D5038
llvm-svn: 220118
Eric Fiselier