This avoids the need to have reserve and addString in sync.
We avoid hashing the global symbols again. This means that we don't
merge a global symbol that has the same name as some other string, but
that doesn't seem very common. The string table size is the same in
clang an scylladb with or without hashing global symbols again.
llvm-svn: 259136
There are a few cases where we have almost duplicated code.
This patches fixes the simplest: the finalize and write of dynamic
section. Right now they have to have exactly the same structure to
decide if a DT_* entry is needed and then to actually write it.
We cannot just write it to a std::vector in the first pass since
addresses have not been computed yet.
llvm-svn: 258723
Summary: It looks like this snuck through in r256143/D15383.
Reviewers: ruiu, grimar
Differential Revision: http://reviews.llvm.org/D16500
llvm-svn: 258599
Some MIPS relocation (for now R_MIPS_GOT16) requires creation of GOT
entries for symbol not included in the dynamic symbol table. They are
local symbols and non-local symbols with 'local' visibility. Local GOT
entries occupy continuous block between GOT header and regular GOT
entries.
The patch adds initial support for handling local GOT entries. The main
problem is allocating local GOT entries for local symbols. Such entries
should be initialized by high 16-bit of the symbol value. In ideal world
there should be no duplicated entries with the same values. But at the
moment of the `Writer::scanRelocs` call we do not know a value of the
symbol. In this patch we create new local GOT entry for each relocation
against local symbol, though we can exhaust GOT quickly. That needs to
be optimized later. When we calculate relocation we know a final symbol
value and request local GOT entry index. To do that we maintain map
between addresses and local GOT entry indexes. If we start to calculate
relocations in parallel we will have to serialize access to this map.
Differential Revision: http://reviews.llvm.org/D16324
llvm-svn: 258388
Added check for terminator CIE/FDE which has zero data size.
void EHOutputSection<ELFT>::addSectionAux(
...
// If CIE/FDE data length is zero then Length is 4, this
// shall be considered a terminator and processing shall end.
if (Length == 4)
break;
...
After this "Bug 25923 - lld/ELF2 linked application crashes if exceptions were used." is fixed for me. Self link of clang also works.
Initial commit message:
[ELF] - implemented --eh-frame-hdr command line option.
--eh-frame-hdr
Request creation of ".eh_frame_hdr" section and ELF "PT_GNU_EH_FRAME" segment header.
Both gold and the GNU linker support an option --eh-frame-hdr which tell them to construct a header for all the .eh_frame sections. This header is placed in a section named .eh_frame_hdr and also in a PT_GNU_EH_FRAME segment. At runtime the unwinder can find all the PT_GNU_EH_FRAME segments by calling dl_iterate_phdr.
This section contains a lookup table for quick binary search of FDEs.
Detailed info can be found here:
http://www.airs.com/blog/archives/462
Differential revision: http://reviews.llvm.org/D15712
llvm-svn: 257889
--eh-frame-hdr
Request creation of ".eh_frame_hdr" section and ELF "PT_GNU_EH_FRAME" segment header.
Both gold and the GNU linker support an option --eh-frame-hdr which tell them to construct a header for all the .eh_frame sections. This header is placed in a section named .eh_frame_hdr and also in a PT_GNU_EH_FRAME segment. At runtime the unwinder can find all the PT_GNU_EH_FRAME segments by calling dl_iterate_phdr.
This section contains a lookup table for quick binary search of FDEs.
Detailed info can be found here:
http://www.airs.com/blog/archives/462
Differential revision: http://reviews.llvm.org/D15712
llvm-svn: 257753
String tables in unstripped executable files are fairly large in size.
For example, lld's executable file is about 34.4 MB in my environment,
and of which 3.5 MB is the string table. Efficiency of string table
construction matters.
Previously, the string table was built in an inefficient way. We used
StringTableBuilder to build that and enabled string tail merging,
although tail merging is not effective for the symbol table (you can
only make the string table 0.3% smaller for lld.) Tail merging is
computation intensive task and slow.
This patch eliminates string tail merging.
I changed the way of adding strings to the string table in this patch
too. Previously, strings were added using add() and the same strings
were then passed to getOffset() to get their offsets in the string table.
In this way, getOffset() needs to look up a hash table to get offsets
for given strings. This is a violation of "we look up the symbol table
(or a hash table) only once for each symbol" dogma of the new LLD's
design. Hash table lookup for long C++ mangled names is slow.
I eliminated that lookup in this patch.
In total, this patch improves link time of lld itself about 12%
(3.50 seconds -> 3.08 seconds.)
llvm-svn: 257017
MipsReginfoInputSection is basically just a container of Elf_Mips_Reginfo
struct. This patch makes that struct directly accessible from others.
llvm-svn: 256984
The number of output sections is usually limited, so the cost
of allocating them is not a bottleneck. This patch simplifies
the code by removing the allocators.
llvm-svn: 256437
OutputSectionBase already has virtual member functions.
This patch makes addSection() a virtual function to remove code
from Writer::createSections().
llvm-svn: 256436
I am working on adding LTO support to the new ELF lld.
In order to do that, it will be necessary to represent defined and
undefined symbols that are not from ELF files. One way to do it is to
change the symbol hierarchy to look like
Defined : SymbolBody
Undefined : SymbolBody
DefinedElf<ELFT> : Defined
UndefinedElf<ELFT> : Undefined
Another option would be to use bogus Elf_Sym, but I think that is
getting a bit too hackish.
This patch does the Undefined/UndefinedElf. Split. The next one
will do the Defined/DefinedElf split.
llvm-svn: 256289
This patch changes sequence of applying relocations, moving tls optimized relocation handling code before code for other locals.
Without that change relocation @GOTTPOFF against local symbol caused runtime error ("unrecognized reloc ...").
That change also should fix other tls optimized relocations, but I did not check them, that's a field for another patch.
R_X86_64_GOTTPOFF relocations against locals can be found when linking against libc.a(malloc.o):
000000000036 000600000016 R_X86_64_GOTTPOFF 0000000000000000 libc_tsd_MALLOC - 4
000000000131 000600000016 R_X86_64_GOTTPOFF 0000000000000000 libc_tsd_MALLOC - 4
Differential revision: http://reviews.llvm.org/D15581
llvm-svn: 256145
This relocation is similar to R_*_RELATIVE except that the value used in this relocation is the program address returned by the function, which takes no arguments, at the address of
the result of the corresponding R_*_RELATIVE relocation as specified in the processor-specific ABI. The purpose of this relocation to avoid name lookup for locally defined STT_GNU_IFUNC symbols at load-time.
More info can be found in ifunc.txt from https://sites.google.com/site/x32abi/documents.
Differential revision: http://reviews.llvm.org/D15235
llvm-svn: 256144
R_386_GOTOFF is calculated as S + A - GOT, where:
S - Represents the value of the symbol whose index resides in the relocation entry.
A - Represents the addend used to compute the value of the relocatable field.
GOT - Represents the address of the global offset table.
Differential revision: http://reviews.llvm.org/D15383
llvm-svn: 256143
MIPS .reginfo section provides information on the registers used by
the code in the object file. Linker should collect this information and
write .reginfo section in the output file. This section contains a union
of used registers masks taken from input .reginfo sections and final
value of the `_gp` symbol.
For details see the "Register Information" section in Chapter 4 in the
following document:
ftp://www.linux-mips.org/pub/linux/mips/doc/ABI/mipsabi.pdf
The patch implements .reginfo sections handling with a couple missed
features: a) it does not put output .reginfo section into the separate
REGINFO segment; b) it does not merge `ri_cprmask` masks from input
section. These features will be implemented later.
Differential Revision: http://reviews.llvm.org/D15669
llvm-svn: 256119
Main aim of the patch to introduce basic support for TLS access models for x86 target.
Models using @tlsgd, @tlsldm and @gotntpoff are implemented.
Differential revision: http://reviews.llvm.org/D15060
llvm-svn: 254500
Combination of @tlsgd and @gottpoff at the same time leads to miss of R_X86_64_TPOFF64 dynamic relocation. Patch fixes that.
@tlsgd(%rip) - Allocate two contiguous entries in the GOT to hold a tls index
structure (for passing to tls get addr).
@gottpoff(%rip) - Allocate one GOT entry to hold a variable offset in initial TLS
block (relative to TLS block end, %fs:0).
The same situation can be observed for x86 (probably others too, not sure) with corresponding for that target relocations: @tlsgd, @gotntpoff.
Differential revision: http://reviews.llvm.org/D15105
llvm-svn: 254443
Fix was:
uint32_t getLocalTlsIndexVA() { return getVA() + LocalTlsIndexOff; }
=>
uint32_t getLocalTlsIndexVA() { return Base::getVA() + LocalTlsIndexOff; }
Both works for my MSVS.
Original commit message:
[ELF] - Refactor of tls_index implementation for tls local dynamic model.
Patch contains the next 2 changes:
1) static variable Out<ELFT>::LocalModuleTlsIndexOffset moved to Out<ELFT>::Got. At fact there is no meaning for it to be separated from GOT class because at each place of using it anyways needs to call GOT`s getVA(). Also it is impossible to have that offset and not have GOT.
2) addLocalModuleTlsIndex -> addLocalModelTlsIndex (word "Module" changed to "Model"). Not sure was it a mistype or not but I think that update is closer to Urlich terminology.
Differential revision: http://reviews.llvm.org/D15113
llvm-svn: 254433
It failed buildbot:
http://lab.llvm.org:8011/builders/llvm-clang-lld-x86_64-scei-ps4-ubuntu-fast/builds/3782/steps/build/logs/stdio
Target.cpp
In file included from /home/buildbot/Buildbot/Slave/llvm-clang-lld-x86_64-scei-ps4-ubuntu-fast/llvm.src/tools/lld/ELF/Target.cpp:20:
/home/buildbot/Buildbot/Slave/llvm-clang-lld-x86_64-scei-ps4-ubuntu-fast/llvm.src/tools/lld/ELF/OutputSections.h:136:42: error: use of undeclared identifier 'getVA'
uint32_t getLocalTlsIndexVA() { return getVA() + LocalTlsIndexOff; }
llvm-svn: 254432
Patch contains the next 2 changes:
1) static variable Out<ELFT>::LocalModuleTlsIndexOffset moved to Out<ELFT>::Got. At fact there is no meaning for it to be separated from GOT class because at each place of using it anyways needs to call GOT`s getVA(). Also it is impossible to have that offset and not have GOT.
2) addLocalModuleTlsIndex -> addLocalModelTlsIndex (word "Module" changed to "Model"). Not sure was it a mistype or not but I think that update is closer to Urlich terminology.
Differential revision: http://reviews.llvm.org/D15113
llvm-svn: 254428
Splitted writeTo to separate tls relocs handling stuff which is too long for one method now. NFC.
Differential revision: http://reviews.llvm.org/D15012
llvm-svn: 254309
Patch implements lazy relocations for x86.
One of features of x86 is that executable files and shared object files have separate procedure linkage tables. So patch implements both cases.
Detailed information about instructions used can be found in http://docs.oracle.com/cd/E19620-01/805-3050/chapter6-1235/index.html (search: x86: Procedure Linkage Table).
Differential revision: http://reviews.llvm.org/D14955
llvm-svn: 254098
The MIPS target requires specific dynamic section entries to be defined.
* DT_MIPS_RLD_VERSION and DT_MIPS_FLAGS store predefined values.
* DT_MIPS_BASE_ADDRESS holds base VA.
* DT_MIPS_LOCAL_GOTNO holds the number of local GOT entries.
* DT_MIPS_SYMTABNO holds the number of .dynsym entries.
* DT_MIPS_GOTSYM holds the index of the .dynsym entry
which corresponds to the first entry of the global part of GOT.
* DT_MIPS_RLD_MAP holds the address of the reserved space in the data segment.
* DT_MIPS_PLTGOT points to the .got.plt section if it exists.
* DT_PLTGOT holds the address of the GOT section.
See "Dynamic Section" in Chapter 5 in the following document for detailed
description: ftp://www.linux-mips.org/pub/linux/mips/doc/ABI/mipsabi.pdf
Differential revision: http://reviews.llvm.org/D14450
llvm-svn: 252857
This adds support for:
* Uniquing CIEs
* Dropping FDEs that point to dropped sections
It drops 657 488 bytes from the .eh_frame of a Release+Asserts clang.
The link time impact is smallish. Linking clang with a Release+Asserts
lld goes from 0.488064805 seconds to 0.504763060 seconds (1.034 X slower).
llvm-svn: 252790
leaq symbol@tlsld(%rip), %rdi
call __tls_get_addr@plt
symbol@tlsld (R_X86_64_TLSLD) instructs the linker to generate a tls_index entry (two GOT slots) in the GOT for the entire module (shared object or executable) with an offset of 0. The symbol for this GOT entry doesn't matter (as long as it's either local to the module or null), and gold doesn't put a symbol in the dynamic R_X86_64_DTPMOD64 relocation for the GOT entry.
All other platforms defined in http://www.akkadia.org/drepper/tls.pdf except for Itanium use a similar model where global and local dynamic GOT entries take up 2 contiguous GOT slots, so we can handle this in a unified manner if we don't care about Itanium.
While scanning relocations we need to identify local dynamic relocations and generate a single tls_index entry in the GOT for the module and store the address of it somewhere so we can later statically resolve the offset for R_X86_64_TLSLD relocations. We also need to generate a R_X86_64_DTPMOD64 relocation in the RelaDyn relocation section.
This implementation is a bit hacky. It side steps the issue of GotSection and RelocationSection only handling SymbolBody entries by relying on a specific relocation type. The alternative to this seemed to be completely rewriting how GotSection and RelocationSection work, or using a different hacky signaling method.
llvm-svn: 252682
This is cleaner than computing relocations as if we had done it.
While at it, keep a single Phdr variable instead of multiple fields of it.
llvm-svn: 252352
This patch implements R_MIPS_GOT16 relocation for global symbols in order to
generate some entries in GOT. Only reserved and global entries are supported
for now. For the detailed description about GOT in MIPS, see "Global Offset
Table" in Chapter 5 in the followin document:
ftp://www.linux-mips.org/pub/linux/mips/doc/ABI/mipsabi.pdf
In addition, the platform specific symbol "_gp" is added, see "Global Data
Symbols" in Chapter 6 in the aforementioned document.
Differential revision: http://reviews.llvm.org/D14211
llvm-svn: 252275
For x86-64 the initial executable TLS block is placed directly before the
thread specific data register so compilers can directly access it via
R_X86_64_TPOFF32. Generate the correct (negative) offset for this case.
llvm-svn: 252131
This does not support TPOFF32 relocations to local symbols as the address calculations are separate. Support for this will be a separate patch.
llvm-svn: 251998
Rafael Espindola