This reverts commit 82a3883715.
The original version had a copy-paste error: using the Interrupt timeout
for the ResumeSynchronous wait, which is clearly wrong. This error would
have been evident with real use, but the interrupt is long enough that it
only caused one testsuite failure (in the Swift fork).
Anyway, I found that mistake and fixed it and checked all the other places
where I had to plumb through a timeout, and added a test with a short
interrupt timeout stepping over a function that takes 3x the interrupt timeout
to complete, so that should detect a similar mistake in the future.
Refactor SetCurrentThread() and SetCurrentThreadForRun() to reduce code
duplication and simplify it. Both methods now call common
SendSetCurrentThreadPacket() that implements the common protocol
exchange part (the only variable is sending `Hg` vs `Hc`) and returns
the selected TID. The logic is rewritten to use a StreamString
instead of snprintf().
A side effect of the change is that thread-id sent is now zero-padded.
However, this should not have practical impact on the server as both
forms are equivalent.
Differential Revision: https://reviews.llvm.org/D100459
This patch implements a slight improvement when debugging across
platforms and remapping source paths that are in a non-native
format. See the unit test for examples.
rdar://79205675
Differential Revision: https://reviews.llvm.org/D104407
These were disabled in 473a3a773e
because they failed on 32 bit platforms. (Arm for sure but I assume
any 32 bit)
This was due to the printf formatter used. These assumed
that types like uint64_t/size_t would be certain size/type and
that changes on 32 bit.
Instead use "z" to print the size_t and PRI<...> formatters
for the addr_t (always uint64_t) and the int32_t.
This adds GDB client support for the qMemTags packet
which reads memory tags. Following the design
which was recently committed to GDB.
https://sourceware.org/gdb/current/onlinedocs/gdb/General-Query-Packets.html#General-Query-Packets
(look for qMemTags)
lldb commands will use the new Process methods
GetMemoryTagManager and ReadMemoryTags.
The former takes a range and checks that:
* The current process architecture has an architecture plugin
* That plugin provides a MemoryTagManager
* That the range of memory requested lies in a tagged range
(it will expand it to granules for you)
If all that was true you get a MemoryTagManager you
can give to ReadMemoryTags.
This two step process is done to allow commands to get the
tag manager without having to read tags as well. For example
you might just want to remove a logical tag, or error early
if a range with tagged addresses is inverted.
Note that getting a MemoryTagManager doesn't mean that the process
or a specific memory range is tagged. Those are seperate checks.
Having a tag manager just means this architecture *could* have
a tagging feature enabled.
An architecture plugin has been added for AArch64 which
will return a MemoryTagManagerAArch64MTE, which was added in a
previous patch.
Reviewed By: omjavaid
Differential Revision: https://reviews.llvm.org/D95602
This adds the MemoryTagManager class and a specialisation
of that class for AArch64 MTE tags. It provides a generic
interface for various tagging operations.
Adding/removing tags, diffing tagged pointers, etc.
Later patches will use this manager to handle memory tags
in generic code in both lldb and lldb-server.
Since it will be used in both, the base class header is in
lldb/Target.
(MemoryRegionInfo is another example of this pattern)
Reviewed By: omjavaid
Differential Revision: https://reviews.llvm.org/D97281
LLDB supports having globbing regexes in the process launch arguments that will
be resolved using the user's shell. This requires that we pass the launch args
to the shell and then read back the expanded arguments using LLDB's argdumper
utility.
As the shell will not just expand the globbing regexes but all special
characters, we need to escape all non-globbing charcters such as $, &, <, >,
etc. as those otherwise are interpreted and removed in the step where we expand
the globbing characters. Also because the special characters are shell-specific,
LLDB needs to maintain a list of all the characters that need to be escaped for
each specific shell.
This patch adds the list of special characters that need to be escaped for
`zsh`. Without this patch on systems where `zsh` is the user's shell (like on
all macOS systems) having any of these special characters in your arguments or
path to the binary will cause the process launch to fail. E.g., `lldb -- ./calc
1<2` is failing without this patch. The same happens if the absolute path to
`calc` is in a directory that contains for example parentheses or other special
characters.
Reviewed By: JDevlieghere
Differential Revision: https://reviews.llvm.org/D104627
Rust's v0 name mangling scheme [1] is easy to disambiguate from other
name mangling schemes because symbols always start with `_R`. The llvm
Demangle library supports demangling the Rust v0 scheme. Use it to
demangle Rust symbols.
Added unit tests that check simple symbols. Ran LLDB built with this
patch to debug some Rust programs compiled with the v0 name mangling
scheme. Confirmed symbol names were demangled as expected.
Note: enabling the new name mangling scheme requires a nightly
toolchain:
```
$ cat main.rs
fn main() {
println!("Hello world!");
}
$ $(rustup which --toolchain nightly rustc) -Z symbol-mangling-version=v0 main.rs -g
$ /home/asm/hacking/llvm/build/bin/lldb ./main --one-line 'b main.rs:2'
(lldb) target create "./main"
Current executable set to '/home/asm/hacking/llvm/rust/main' (x86_64).
(lldb) b main.rs:2
Breakpoint 1: where = main`main::main + 4 at main.rs:2:5, address = 0x00000000000076a4
(lldb) r
Process 948449 launched: '/home/asm/hacking/llvm/rust/main' (x86_64)
warning: (x86_64) /lib64/libgcc_s.so.1 No LZMA support found for reading .gnu_debugdata section
Process 948449 stopped
* thread #1, name = 'main', stop reason = breakpoint 1.1
frame #0: 0x000055555555b6a4 main`main::main at main.rs:2:5
1 fn main() {
-> 2 println!("Hello world!");
3 }
(lldb) bt
error: need to add support for DW_TAG_base_type '()' encoded with DW_ATE = 0x7, bit_size = 0
* thread #1, name = 'main', stop reason = breakpoint 1.1
* frame #0: 0x000055555555b6a4 main`main::main at main.rs:2:5
frame #1: 0x000055555555b78b main`<fn() as core::ops::function::FnOnce<()>>::call_once((null)=(main`main::main at main.rs:1), (null)=<unavailable>) at function.rs:227:5
frame #2: 0x000055555555b66e main`std::sys_common::backtrace::__rust_begin_short_backtrace::<fn(), ()>(f=(main`main::main at main.rs:1)) at backtrace.rs:125:18
frame #3: 0x000055555555b851 main`std::rt::lang_start::<()>::{closure#0} at rt.rs:49:18
frame #4: 0x000055555556c9f9 main`std::rt::lang_start_internal::hc51399759a90501a [inlined] core::ops::function::impls::_$LT$impl$u20$core..ops..function..FnOnce$LT$A$GT$$u20$for$u20$$RF$F$GT$::call_once::h04259e4a34d07c2f at function.rs:259:13
frame #5: 0x000055555556c9f2 main`std::rt::lang_start_internal::hc51399759a90501a [inlined] std::panicking::try::do_call::hb8da45704d5cfbbf at panicking.rs:401:40
frame #6: 0x000055555556c9f2 main`std::rt::lang_start_internal::hc51399759a90501a [inlined] std::panicking::try::h4beadc19a78fec52 at panicking.rs:365:19
frame #7: 0x000055555556c9f2 main`std::rt::lang_start_internal::hc51399759a90501a [inlined] std::panic::catch_unwind::hc58016cd36ba81a4 at panic.rs:433:14
frame #8: 0x000055555556c9f2 main`std::rt::lang_start_internal::hc51399759a90501a at rt.rs:34:21
frame #9: 0x000055555555b830 main`std::rt::lang_start::<()>(main=(main`main::main at main.rs:1), argc=1, argv=0x00007fffffffcb18) at rt.rs:48:5
frame #10: 0x000055555555b6fc main`main + 28
frame #11: 0x00007ffff73f2493 libc.so.6`__libc_start_main + 243
frame #12: 0x000055555555b59e main`_start + 46
(lldb)
```
[1]: https://github.com/rust-lang/rust/issues/60705
Reviewed By: clayborg, teemperor
Differential Revision: https://reviews.llvm.org/D104054
This adds a basic SB API for creating and stopping traces.
Note: This doesn't add any APIs for inspecting individual instructions. That'd be a more complicated change and it might be better to enhande the dump functionality to output the data in binary format. I'll leave that for a later diff.
This also enhances the existing tests so that they test the same flow using both the command interface and the SB API.
I also did some cleanup of legacy code.
Differential Revision: https://reviews.llvm.org/D103500
DWARF doesn't describe templates itself but only actual template instantiations.
Because of that LLDB has to infer the parameters of the class template
declarations from the actual instantiations when creating the internal Clang AST
from debug info
Because there is no dedicated DIE for the class template, LLDB also creates the
`ClassTemplateDecl` implicitly when parsing a template instantiation. To avoid
creating one ClassTemplateDecls for every instantiation,
`TypeSystemClang::CreateClassTemplateDecl` will check if there is already a
`ClassTemplateDecl` in the requested `DeclContext` and will reuse a found
fitting declaration.
The logic that checks if a found class template fits to an instantiation is
currently just comparing the name of the template. So right now we map
`template<typename T> struct S;` to an instantiation with the values `S<1, 2,
3>` even though they clearly don't belong together.
This causes crashes later on when for example the Itanium mangler's
`TemplateArgManglingInfo::needExactType` method tries to find fitting the class
template parameter that fits to an instantiation value. In the example above it
will try to find the parameter for the value `2` but will just trigger a
boundary check when retrieving the parameter with index 1 from the class
template.
There are two ways we can end up with an instantiation that doesn't fit to a
class template with the same name:
1. We have two TUs with two templates that have the same name and internal
linkage.
2. A forward declared template instantiation is emitted by GCC and Clang
without an empty list of parameter values.
This patch makes the check for whether a class template declaration can be
reused more sophisticated by also comparing whether the parameter values can fit
to the found class template. If we can't find a fitting class template we
justcreate a second class template with the fitting parameters.
Fixes rdar://76592821
Reviewed By: kastiglione
Differential Revision: https://reviews.llvm.org/D100662
Test leaks if we run
tools/lldb/unittests/Host/HostTests without --gtest_filter
Reviewed By: teemperor
Differential Revision: https://reviews.llvm.org/D104091
It seems std::ostringstream ignores NaN signs on Darwin while it prints them on
Linux. This causes that LLDB behaves differently on those platforms which is
both confusing for users and it also means we have to deal with that in our
tests.
This patch manually implements the NaN/Inf printing (which are apparently
implementation defined) to make LLDB print the same thing on all platforms. The
only output difference in practice seems to be that we now print negative NaNs
as `-nan`, but this potentially also changes the output on other systems I
haven't tested this on.
Reviewed By: JDevlieghere
Differential Revision: https://reviews.llvm.org/D102845
The added DumpDataExtractorTest uncovered that this is lshifting a negative
integer which upsets ubsan and breaks the sanitizer bot. This patch just
changes the variable we shift to be unsigned and adds a bunch of tests to make
sure this function does what it promises.
This reverts commit bd5751f3d2.
This patch series is causing us to every so often miss switching
the state from eStateRunning to eStateStopped when we get the stop
packet from the debug server.
Reverting till I can figure out how that could be happening.
ProcessGDBRemote plugin layers.
Also fix a bug where if we tried to interrupt, but the ReadPacket
wakeup timer woke us up just after the timeout, we would break out
the switch, but then since we immediately check if the response is
empty & fail if it is, we could end up actually only giving a
small interval to the interrupt.
Differential Revision: https://reviews.llvm.org/D102085
A type system is not guaranteed to have a symbol file. This patch adds null-pointer checks so we don't crash when trying to access a type system's symbol file.
Reviewed By: aprantl, teemperor
Differential Revision: https://reviews.llvm.org/D101539
Fix cases that can crash `SBStructuredData::operator=`.
This happened in a case where `rhs` had a null `SBStructuredDataImpl`.
Differential Revision: https://reviews.llvm.org/D101585
This patch should fix the windows test failure following `3e2ed7440569`.
It makes use of a `SourceLocationSpec` object when resolving a symbol
context from `SymbolFilePDB` file.
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
This patch refactors a good part of the code base turning the usual
FileSpec, Line, Column, CheckInlines, ExactMatch arguments into a
SourceLocationSpec object.
This change is required for a following patch that will add handling of the
column line information when doing symbol resolution.
Differential Revision: https://reviews.llvm.org/D100965
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
A source location specifier class that holds a Declaration object containing
a FileSpec with line and column information. The column line is optional.
It also holds search flags that can be fetched by resolvers to look inlined
declarations and/or exact matches.
It describes a specific location in a source file and allows the user
to perform checks and comparaisons between multiple instances of that class.
Differential Revision: https://reviews.llvm.org/D100962
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
This patch moves the Declaration class from the Symbol library to the
Core library. This will allow to use it in a more generic fashion and
aims to lower the dependency cycles when it comes to the linking.
The patch also does some cleaning up by making column information
permanent and removing the LLDB_ENABLE_DECLARATION_COLUMNS directives.
Differential revision: https://reviews.llvm.org/D101556
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
* Using a base address or skipping it with LLDB_INVALID_ADDRESS
* Using a data offset, which does not effect the printed addresses
* Not providing an output stream
* Formatting a double sized HexFloat
* Formatting over multiple lines
Since address printing now has its own test,
I've removed the base address from all the format
type tests.
The multi line tests still use a base address to check that
it's incremented correctly for each new line.
Reviewed By: teemperor
Differential Revision: https://reviews.llvm.org/D101627
Covering basic cases where you have 1 item on 1 line.
Apart from eFormatCharArray, where using multiple lines
highlights the difference between it and eFormatVectorOfChar.
Reviewed By: #lldb, teemperor
Differential Revision: https://reviews.llvm.org/D101453
Add a NativeDelegate API to pass new processes (forks) to LLGS,
and support detaching them via the 'D' packet. A 'D' packet without
a specific PID detaches all processes, otherwise it detaches either
the specified subprocess or the main process, depending on the passed
PID.
Differential Revision: https://reviews.llvm.org/D100191
Just fixing a few things I noticed as I am working on another feature for format
strings in the prompt: forward decls, adding constexpr constructors, various
checks, and unit tests for FormatEntity::Parse and new Definition constructors,
etc.
Reviewed By: teemperor
Differential Revision: https://reviews.llvm.org/D98153
Support registering multiple callbacks for a single signal. This is
necessary to support multiple co-existing native process instances, with
separate SIGCHLD handlers.
The system signal handler is registered on first request, additional
callback are added on subsequent requests. The system signal handler
is removed when last callback is unregistered.
Differential Revision: https://reviews.llvm.org/D100418
If the debug info is missing the terminating null die, we would crash
when trying to access the nonexisting children/siblings. This was
discovered because the test case for D98619 accidentaly produced such
input.
This fixes (works around) two errors with gcc-6.5.
- in the RegisterContext_x86 files, gcc is unable to synthesize a
default constructor -- it thinks it needs to initialize the virtual
base class, even though said classes are abstract. I fix that by
providing a dummy constructor.
- In ReproducerInstrumentationTest, it is not able to deduce that the
TestingRegistry class is movable (it contains a map of unique
pointers). I change the type from Optional<TestingRegistry> to
unique_ptr<TestingRegistry), so that moving is not required
(copying/moving a polymorphic type is not a very good idea in any
case).
This implements the interactive trace start and stop methods.
This diff ended up being much larger than I anticipated because, by doing it, I found that I had implemented in the beginning many things in a non optimal way. In any case, the code is much better now.
There's a lot of boilerplate code due to the gdb-remote protocol, but the main changes are:
- New tracing packets: jLLDBTraceStop, jLLDBTraceStart, jLLDBTraceGetBinaryData. The gdb-remote packet definitions are quite comprehensive.
- Implementation of the "process trace start|stop" and "thread trace start|stop" commands.
- Implementaiton of an API in Trace.h to interact with live traces.
- Created an IntelPTDecoder for live threads, that use the debugger's stop id as checkpoint for its internal cache.
- Added a functionality to stop the process in case "process tracing" is enabled and a new thread can't traced.
- Added tests
I have some ideas to unify the code paths for post mortem and live threads, but I'll do that in another diff.
Differential Revision: https://reviews.llvm.org/D91679
Add a minimal support for the multiprocess extension in lldb-server.
The server indicates support for it via qSupported, and accepts
thread-ids containing a PID. However, it still does not support
debugging more than one inferior, so any other PID value results
in an error.
Differential Revision: https://reviews.llvm.org/D98482
This test is not useful as the functions it's testing are just returning
a constant. It also fails in unoptimized builds as it's comparing
character strings by address.
When LLVM error handling was introduced to the parsing of the .debug_aranges it would cause major issues if any DWARFDebugArangeSet::extract() calls returned any errors. The code in DWARFDebugInfo::GetCompileUnitAranges() would end up calling DWARFDebugAranges::extract() which would return an error if _any_ DWARFDebugArangeSet had any errors, but it default constructed a DWARFDebugAranges object into DWARFDebugInfo::m_cu_aranges_up and populated it partially, and returned an error prior to finishing much needed functionality in the DWARFDebugInfo::GetCompileUnitAranges() function. Subsequent callers to this function would see that the DWARFDebugInfo::m_cu_aranges_up was actually valid and return this partially populated DWARFDebugAranges reference _and_ it would not be sorted or minimized.
This above bugs would cause an incomplete .debug_aranges parsing, it would skip manually parsing any compile units for ranges, and would not sort the DWARFDebugAranges in m_cu_aranges_up.
This bug would also cause breakpoints set by file and line to fail to set correctly if a symbol context for an address could not be resolved properly, which the incomplete and unsorted DWARFDebugAranges object that DWARFDebugInfo::GetCompileUnitAranges() returned would cause symbol context lookups resolved by address (breakpoint address) to fail to find any DWARF debug info for a given address.
This patch fixes all of the issues that I found:
- DWARFDebugInfo::GetCompileUnitAranges() no longer returns a "llvm::Expected<DWARFDebugAranges &>", but just returns a "const DWARFDebugAranges &". Why? Because this code contained a fallback that would parse all of the valid DWARFDebugArangeSet objects, and would check which compile units had valid .debug_aranges set entries, and manually build an address ranges table using DWARFUnit::BuildAddressRangeTable(). If we return an error because any DWARFDebugArangeSet has any errors, then we don't do any of this code. Now we parse all DWARFDebugArangeSet objects that have no errors, if any calls to DWARFDebugArangeSet::extract() return errors, we skip that DWARFDebugArangeSet so that we can use the fallback call to DWARFUnit::BuildAddressRangeTable(). Since DWARFDebugInfo::GetCompileUnitAranges() needs to parse what it can from the .debug_aranges and build address ranges tables for any compile units that don't have any .debug_aranges sets, everything now works as expected.
- Fix an issue where a DWARFDebugArangeSet contains multiple terminator entries. The LLVM parser and llvm-dwarfdump properly warn about this because it happens with linux compilers and linkers and was the original cause of the bug I am fixing here. We now correctly warn about this issue if "log enable dwarf info" is enabled, but we continue to parse the DWARFDebugArangeSet correctly so we don't lose data that is contained in the .debug_aranges section.
- DWARFDebugAranges::extract() no longer returns a llvm::Error because we need to be able to parse all of the valid DWARFDebugArangeSet objects. It also will correctly skip a DWARFDebugArangeSet object that has errors in the middle of the stream by setting the start offsets of each DWARFDebugArangeSet to be calculated by the previous DWARFDebugArangeSet::extract() calculated offset that uses the header which contains the length of the DWARFDebugArangeSet. This means if do we run into real errors while parsing individual DWARFDebugArangeSet objects, we can continue to parse the rest of the validly encoded DWARFDebugArangeSet objects in the .debug_aranges section. This will allow LLDB to parse DWARF that contains a possibly newer .debug_aranges set format than LLDB currently supports because we will error out for the parsing of the DWARFDebugArangeSet, but be able to skip to the next DWARFDebugArangeSet object using the "DWARFDebugArangeSet.m_header.length" field to calculate the next starting offset.
Tests were added to cover all new functionality.
Differential Revision: https://reviews.llvm.org/D99401
In future patches I will be setting the IsText parameter frequently so I will refactor the args to be in the following order. I have removed the FileSize parameter because it is never used.
```
static ErrorOr<std::unique_ptr<MemoryBuffer>>
getFile(const Twine &Filename, bool IsText = false,
bool RequiresNullTerminator = true, bool IsVolatile = false);
static ErrorOr<std::unique_ptr<MemoryBuffer>>
getFileOrSTDIN(const Twine &Filename, bool IsText = false,
bool RequiresNullTerminator = true);
static ErrorOr<std::unique_ptr<MB>>
getFileAux(const Twine &Filename, uint64_t MapSize, uint64_t Offset,
bool IsText, bool RequiresNullTerminator, bool IsVolatile);
static ErrorOr<std::unique_ptr<WritableMemoryBuffer>>
getFile(const Twine &Filename, bool IsVolatile = false);
```
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D99182
DWARFExpression implements the DWARF2 expression model that left
ambiguity on whether the result of an expression was a value or an
address. This patch implements the DWARF location description model
introduces in DWARF 4 and sets the result Value's kind accordingly, if
the expression comes from a DWARF v4+ compile unit. The nomenclature
is taken from DWARF 5, chapter 2.6 "Location Descriptions".
Differential Revision: https://reviews.llvm.org/D98996
Jim Ingham