Use range instead of xrange whenever possible. The extra list creation in Python2
is generally not a performance bottleneck.
Differential Revision: https://reviews.llvm.org/D56253
llvm-svn: 350309
Make sure all print statements are compatible with Python 2 and Python3 using
the `from __future__ import print_function` statement.
Differential Revision: https://reviews.llvm.org/D56249
llvm-svn: 350307
Calculate which item is being held and then display it with the appropriate type. We also
optimize the display of PointerUnion3 to take advantage of our knowing that the IntMask is
always 1 in PointerUnion types
llvm-svn: 350280
Also add a fuzzer() template for defining fuzzers that's similar to
add_llvm_fuzzer in the CMake build, and a build file for dependency
llvm/lib/FuzzMutate.
Also make `assert(defined(...` error strings a bit more self-consistent.
Differential Revision: https://reviews.llvm.org/D56194
llvm-svn: 350238
These two plugins are loaded into a host process that contains all LLVM
symbols, so they don't link against anything. This required minor readjustments
to the tablegen() setup of IR.
Needed for check-llvm.
Differential Revision: https://reviews.llvm.org/D56204
llvm-svn: 350234
Also add build files for dependencies llvm/lib/ExecutionEngine/{Interpreter,Orc}
Needed for check-llvm.
Differential Revision: https://reviews.llvm.org/D56193
llvm-svn: 350226
Needed for check-llvm.
This is the last target reading llvm_install_binutils_symlinks.
Differential Revision: https://reviews.llvm.org/D56190
llvm-svn: 350215
Also add build file for dependency llvm/lib/XRay.
Needed for check-llvm.
(yaml-bench is an llvm/util, not an llvm/tool.)
Differential Revision: https://reviews.llvm.org/D56163
llvm-svn: 350211
Also add build file for dependency llvm/lib/ExecutionEngine/MCJIT.
The exegesis stuff is pretty hairy and knows a lot about Target internals (in
general, not specifically in the GN build). I put the llvm-tblgen -gen-exegesis
call in llvm/tools/llvm-exegesis/lib/X86, instead of in llvm/lib/Target/X86
where it is in CMake land, and asked on D52932 why it's in that place in the
CMake build.
Needed for check-llvm.
Differential Revision: https://reviews.llvm.org/D56167
llvm-svn: 350184
Also add a build file for clang/lib/ASTMatchers/Dynamic, which is only needed
by tests (and clang/tools/extra).
Also make llvm/utils/gn/build/sync_source_lists_from_cmake.py check that every
CMakeLists.txt file below {lld,clang}/unittests has a corresponding BUILD.gn
file, so we notice if new test binaries get added (since the failure mode for
missing GN build files for tests is just the tests silently not running in the
GN build).
Also add a unittest() macro for defining unit test targets, and add a lengthy
comment there about where the unit test binaries go and why.
With this, the build files for //clang are complete.
Differential Revision: https://reviews.llvm.org/D56116
llvm-svn: 350171
With this, check-clang runs and passes all of clang's lit tests. It doesn't run
any of its unit tests yet.
Like with check-lld, running just ninja -C out/gn will build all prerequisites
needed to run tests, but it won't run the tests (so that the build becomes
clean after one build). Running ninja -C out/gn check-clang will build
prerequisites if needed and run the tests. The check-clang target never becomes
clean and runs tests every time.
Differential Revision: https://reviews.llvm.org/D56095
llvm-svn: 350108
GN wants the NOSORT line to be the first line of a comment block, not the last
line.
I sent https://gn-review.googlesource.com/c/gn/+/3560 to support having it in
the last line too, but since it will be a while until everyone has that change
even if it's expected, use the form that works today.
Differential Revision: https://reviews.llvm.org/D56065
llvm-svn: 350060
libclang is somewhat incomplete. It's just enough to get check-clang to pass,
but that requires it to be pretty complete. The biggest thing is that it's not
built as a shared library on Linux. The libclang/BUILD.gn file has a comment
with details on what else is missing.
Differential Revision: https://reviews.llvm.org/D56059
llvm-svn: 350054
Verified by comparing the output of `otool -P bin/clang` between the GN and the
CMake build.
Differential Revision: https://reviews.llvm.org/D55984
llvm-svn: 349992
The intent is to add the build file for clang/lib/StaticAnalyzer/Frontend; everything else is pulled in by that.
Differential Revision: https://reviews.llvm.org/D55978
llvm-svn: 349986
The check-lld target was missing the dependency on llvm-nm and llvm-objdump in that case.
Differential Revision: https://reviews.llvm.org/D55941
llvm-svn: 349836
Mostly boring, except for the spurious dependency on StaticAnalyzer/Checkers --
see comments in the code.
Differential Revision: https://reviews.llvm.org/D55927
llvm-svn: 349832
Nothing really interesting. One thing to consider is where the clang_tablegen()
invocations that generate files that are private to a library should be. The
CMake build puts them in clang/include/clang/Parse (in this case), but maybe
putting them right in clang/lib/Parse/BUILD.gn makes mor sense. (For
clang_tablegen() calls that generate .inc files used by the public headers,
putting the call in the public BUILD file makes sense.)
For now, I've put the build file in the public header folder, since that
matches CMake and what I did in the last 2 clang patches, but I'm not sure I
like this.
Differential Revision: https://reviews.llvm.org/D55925
llvm-svn: 349831
And add build files for gtest.
With this, the build files for //lld are complete.
Differential Revision: https://reviews.llvm.org/D55838
llvm-svn: 349704
Also add a build file for llvm-lit, which in turn needs llvm/tools/llvm-config.
With this, check-lld runs and passes all of lld's lit tests. It doesn't run any
of its unit tests yet.
Running just ninja -C out/gn will build all prerequisites needed to run tests,
but it won't run the tests (so that the build becomes clean after one build).
Running ninja -C out/gn check-lld will build prerequisites if needed and run
the tests. The check-lld target never becomes clean and runs tests every time.
llvm-config's build file is a bit gnarly: Everything not needed to run tests is
basically stubbed out. Also, to generate LibraryDependencies.inc we shell out
to llvm-build at build-time. It would be much nicer to get the library
dependencies by using the dependency data the GN build contains
(http://llvm-cs.pcc.me.uk/gen/tools/llvm-config/LibraryDependencies.inc#1).
Differential Revision: https://reviews.llvm.org/D55836
llvm-svn: 349702
Adds a build file for clang-tblgen and an action for running it, and uses that
to process all the .td files in include/clang/Basic.
Also adds an action to write include/clang/Config/config.h and
include/clang/Basic/Version.inc.
Differential Revision: https://reviews.llvm.org/D55847
(The previous commit of this contained unrelated changes, so I reverted the
whole previous commit and I'm now landing only what I intended to land.)
llvm-svn: 349679
Adds a build file for clang-tblgen and an action for running it, and uses that
to process all the .td files in include/clang/Basic.
Also adds an action to write include/clang/Config/config.h and
include/clang/Basic/Version.inc.
Differential Revision: https://reviews.llvm.org/D55847
llvm-svn: 349677
This relands r330742:
"""
Let TableGen write output only if it changed, instead of doing so in cmake.
Removes one subprocess and one temp file from the build for each tablegen
invocation.
No intended behavior change.
"""
In particular, if you see rebuilds after this change that you didn't see
before this change, that's unintended and it's fine to revert this change
again (but let me know).
r330742 got reverted because some people reported that llvm-tblgen ran on every
build after it. This could happen if the depfile output got deleted without
deleting the main .inc output. To fix, make TableGen always write the depfile,
but keep writing the main .inc output only if it has changed. This matches what
we did in cmake before.
Differential Revision: https://reviews.llvm.org/D55842
llvm-svn: 349624
Also add build files for deps DebugInfo/Symbolize, ToolDrivers/dll-tool.
Also add gn/build/libs/xar (needed by llvm-objdump).
Also delete an incorrect part of the symlink description in //BUILD.gn (it used
to be true before I made the symlink step write a stamp file; now it's no
longer true).
These are all binaries needed by check-lld that need symlinks.
Differential Revision: https://reviews.llvm.org/D55743
llvm-svn: 349486
Apply final suggestions from probinson for this patch series plus a
few more tweaks:
* Improve various docs, for MatchType in particular.
* Rename some members of MatchType. The main problem was that the
term "final match" became a misnomer when CHECK-COUNT-<N> was
created.
* Split InputStartLine, etc. declarations into multiple lines.
Differential Revision: https://reviews.llvm.org/D55738
Reviewed By: probinson
llvm-svn: 349425
This patch implements annotations for diagnostics reporting CHECK-NOT
failed matches. These diagnostics are enabled by -vv. As for
diagnostics reporting failed matches for other directives, these
annotations mark the search ranges using `X~~`. The difference here
is that failed matches for CHECK-NOT are successes not errors, so they
are green not red when colors are enabled.
For example:
```
$ FileCheck -dump-input=help
The following description was requested by -dump-input=help to
explain the input annotations printed by -dump-input=always and
-dump-input=fail:
- L: labels line number L of the input file
- T:L labels the only match result for a pattern of type T from line L of
the check file
- T:L'N labels the Nth match result for a pattern of type T from line L of
the check file
- ^~~ marks good match (reported if -v)
- !~~ marks bad match, such as:
- CHECK-NEXT on same line as previous match (error)
- CHECK-NOT found (error)
- CHECK-DAG overlapping match (discarded, reported if -vv)
- X~~ marks search range when no match is found, such as:
- CHECK-NEXT not found (error)
- CHECK-NOT not found (success, reported if -vv)
- CHECK-DAG not found after discarded matches (error)
- ? marks fuzzy match when no match is found
- colors success, error, fuzzy match, discarded match, unmatched input
If you are not seeing color above or in input dumps, try: -color
$ FileCheck -vv -dump-input=always check5 < input5 |& sed -n '/^<<<</,$p'
<<<<<<
1: abcdef
check:1 ^~~
not:2 X~~
2: ghijkl
not:2 ~~~
check:3 ^~~
3: mnopqr
not:4 X~~~~~
4: stuvwx
not:4 ~~~~~~
5:
eof:4 ^
>>>>>>
$ cat check5
CHECK: abc
CHECK-NOT: foobar
CHECK: jkl
CHECK-NOT: foobar
$ cat input5
abcdef
ghijkl
mnopqr
stuvwx
```
Reviewed By: george.karpenkov, probinson
Differential Revision: https://reviews.llvm.org/D53899
llvm-svn: 349424
This patch implements input annotations for diagnostics reporting
CHECK-DAG discarded matches. These diagnostics are enabled by -vv.
These annotations mark discarded match ranges using `!~~` because they
are bad matches even though they are not errors.
CHECK-DAG discarded matches create another case where there can be
multiple match results for the same directive.
For example:
```
$ FileCheck -dump-input=help
The following description was requested by -dump-input=help to
explain the input annotations printed by -dump-input=always and
-dump-input=fail:
- L: labels line number L of the input file
- T:L labels the only match result for a pattern of type T from line L of
the check file
- T:L'N labels the Nth match result for a pattern of type T from line L of
the check file
- ^~~ marks good match (reported if -v)
- !~~ marks bad match, such as:
- CHECK-NEXT on same line as previous match (error)
- CHECK-NOT found (error)
- CHECK-DAG overlapping match (discarded, reported if -vv)
- X~~ marks search range when no match is found, such as:
- CHECK-NEXT not found (error)
- CHECK-DAG not found after discarded matches (error)
- ? marks fuzzy match when no match is found
- colors success, error, fuzzy match, discarded match, unmatched input
If you are not seeing color above or in input dumps, try: -color
$ FileCheck -vv -dump-input=always check4 < input4 |& sed -n '/^<<<</,$p'
<<<<<<
1: abcdef
dag:1 ^~~~
dag:2'0 !~~~ discard: overlaps earlier match
2: cdefgh
dag:2'1 ^~~~
check:3 X~ error: no match found
>>>>>>
$ cat check4
CHECK-DAG: abcd
CHECK-DAG: cdef
CHECK: efgh
$ cat input4
abcdef
cdefgh
```
This shows that the line 3 CHECK fails to match even though its
pattern appears in the input because its search range starts after the
line 2 CHECK-DAG's match range. The trouble might be that the line 2
CHECK-DAG's match range is later than expected because its first match
range overlaps with the line 1 CHECK-DAG match range and thus is
discarded.
Because `!~~` for CHECK-DAG does not indicate an error, it is not
colored red. Instead, when colors are enabled, it is colored cyan,
which suggests a match that went cold.
Reviewed By: george.karpenkov, probinson
Differential Revision: https://reviews.llvm.org/D53898
llvm-svn: 349423
This patch implements input annotations for diagnostics enabled by -v,
which report good matches for directives. These annotations mark
match ranges using `^~~`.
For example:
```
$ FileCheck -dump-input=help
The following description was requested by -dump-input=help to
explain the input annotations printed by -dump-input=always and
-dump-input=fail:
- L: labels line number L of the input file
- T:L labels the only match result for a pattern of type T from line L of
the check file
- T:L'N labels the Nth match result for a pattern of type T from line L of
the check file
- ^~~ marks good match (reported if -v)
- !~~ marks bad match, such as:
- CHECK-NEXT on same line as previous match (error)
- CHECK-NOT found (error)
- X~~ marks search range when no match is found, such as:
- CHECK-NEXT not found (error)
- ? marks fuzzy match when no match is found
- colors success, error, fuzzy match, unmatched input
If you are not seeing color above or in input dumps, try: -color
$ FileCheck -v -dump-input=always check3 < input3 |& sed -n '/^<<<</,$p'
<<<<<<
1: abc foobar def
check:1 ^~~
not:2 !~~~~~ error: no match expected
check:3 ^~~
>>>>>>
$ cat check3
CHECK: abc
CHECK-NOT: foobar
CHECK: def
$ cat input3
abc foobar def
```
-vv enables these annotations for FileCheck's implicit EOF patterns as
well. For an example where EOF patterns become relevant, see patch 7
in this series.
If colors are enabled, `^~~` is green to suggest success.
-v plus color enables highlighting of input text that has no final
match for any expected pattern. The highlight uses a cyan background
to suggest a cold section. This highlighting can make it easier to
spot text that was intended to be matched but that failed to be
matched in a long series of good matches.
CHECK-COUNT-<num> good matches are another case where there can be
multiple match results for the same directive.
Reviewed By: george.karpenkov, probinson
Differential Revision: https://reviews.llvm.org/D53897
llvm-svn: 349422
This patch implements input annotations for diagnostics that report
unexpected matches for CHECK-NOT. Like wrong-line matches for
CHECK-NEXT, CHECK-SAME, and CHECK-EMPTY, these annotations mark match
ranges using red `!~~` to indicate bad matches that are errors.
For example:
```
$ FileCheck -dump-input=help
The following description was requested by -dump-input=help to
explain the input annotations printed by -dump-input=always and
-dump-input=fail:
- L: labels line number L of the input file
- T:L labels the only match result for a pattern of type T from line L of
the check file
- T:L'N labels the Nth match result for a pattern of type T from line L of
the check file
- !~~ marks bad match, such as:
- CHECK-NEXT on same line as previous match (error)
- CHECK-NOT found (error)
- X~~ marks search range when no match is found, such as:
- CHECK-NEXT not found (error)
- ? marks fuzzy match when no match is found
- colors error, fuzzy match
If you are not seeing color above or in input dumps, try: -color
$ FileCheck -v -dump-input=always check3 < input3 |& sed -n '/^<<<</,$p'
<<<<<<
1: abc foobar def
not:2 !~~~~~ error: no match expected
>>>>>>
$ cat check3
CHECK: abc
CHECK-NOT: foobar
CHECK: def
$ cat input3
abc foobar def
```
Reviewed By: george.karpenkov, probinson
Differential Revision: https://reviews.llvm.org/D53896
llvm-svn: 349421
This patch implements input annotations for diagnostics that report
wrong-line matches for the directives CHECK-NEXT, CHECK-SAME, and
CHECK-EMPTY. Instead of the usual `^~~`, which is used by later
patches for good matches, these annotations use `!~~` to mark the bad
match ranges so that this category of errors is visually distinct.
Because such matches are errors, these annotates are red when colors
are enabled.
For example:
```
$ FileCheck -dump-input=help
The following description was requested by -dump-input=help to
explain the input annotations printed by -dump-input=always and
-dump-input=fail:
- L: labels line number L of the input file
- T:L labels the only match result for a pattern of type T from line L of
the check file
- T:L'N labels the Nth match result for a pattern of type T from line L of
the check file
- !~~ marks bad match, such as:
- CHECK-NEXT on same line as previous match (error)
- X~~ marks search range when no match is found, such as:
- CHECK-NEXT not found (error)
- ? marks fuzzy match when no match is found
- colors error, fuzzy match
If you are not seeing color above or in input dumps, try: -color
$ FileCheck -v -dump-input=always check2 < input2 |& sed -n '/^<<<</,$p'
<<<<<<
1: foo bar
next:2 !~~ error: match on wrong line
>>>>>>
$ cat check2
CHECK: foo
CHECK-NEXT: bar
$ cat input2
foo bar
```
Reviewed By: george.karpenkov, probinson
Differential Revision: https://reviews.llvm.org/D53894
llvm-svn: 349420
This patch implements input annotations for diagnostics that suggest
fuzzy matches for directives for which no matches were found. Instead
of using the usual `^~~`, which is used by later patches for good
matches, these annotations use `?` so that fuzzy matches are visually
distinct. No tildes are included as these diagnostics (independently
of this patch) currently identify only the start of the match.
For example:
```
$ FileCheck -dump-input=help
The following description was requested by -dump-input=help to
explain the input annotations printed by -dump-input=always and
-dump-input=fail:
- L: labels line number L of the input file
- T:L labels the only match result for a pattern of type T from line L of
the check file
- T:L'N labels the Nth match result for a pattern of type T from line L of
the check file
- X~~ marks search range when no match is found
- ? marks fuzzy match when no match is found
- colors error, fuzzy match
If you are not seeing color above or in input dumps, try: -color
$ FileCheck -v -dump-input=always check1 < input1 |& sed -n '/^<<<</,$p'
<<<<<<
1: ; abc def
2: ; ghI jkl
next:3'0 X~~~~~~~~ error: no match found
next:3'1 ? possible intended match
>>>>>>
$ cat check1
CHECK: abc
CHECK-SAME: def
CHECK-NEXT: ghi
CHECK-SAME: jkl
$ cat input1
; abc def
; ghI jkl
```
This patch introduces the concept of multiple "match results" per
directive. In the above example, the first match result for the
CHECK-NEXT directive is the failed match, for which the annotation
shows the search range. The second match result is the fuzzy match.
Later patches will introduce other cases of multiple match results per
directive.
When colors are enabled, `?` is colored magenta. That is, it doesn't
indicate the actual error, which a red `X~~` marker indicates, but its
color suggests it's closely related.
Reviewed By: george.karpenkov, probinson
Differential Revision: https://reviews.llvm.org/D53893
llvm-svn: 349419
Extend FileCheck to dump its input annotated with FileCheck's
diagnostics: errors, good matches if -v, and additional information if
-vv. The goal is to make it easier to visualize FileCheck's matching
behavior when debugging.
Each patch in this series implements input annotations for a
particular category of FileCheck diagnostics. While the first few
patches alone are somewhat useful, the annotations become much more
useful as later patches implement annotations for -v and -vv
diagnostics, which show the matching behavior leading up to the error.
This first patch implements boilerplate plus input annotations for
error diagnostics reporting that no matches were found for a
directive. These annotations mark the search ranges of the failed
directives. Instead of using the usual `^~~`, which is used by later
patches for good matches, these annotations use `X~~` so that this
category of errors is visually distinct.
For example:
```
$ FileCheck -dump-input=help
The following description was requested by -dump-input=help to
explain the input annotations printed by -dump-input=always and
-dump-input=fail:
- L: labels line number L of the input file
- T:L labels the match result for a pattern of type T from line L of
the check file
- X~~ marks search range when no match is found
- colors error
If you are not seeing color above or in input dumps, try: -color
$ FileCheck -v -dump-input=always check1 < input1 |& sed -n '/^Input file/,$p'
Input file: <stdin>
Check file: check1
-dump-input=help describes the format of the following dump.
Full input was:
<<<<<<
1: ; abc def
2: ; ghI jkl
next:3 X~~~~~~~~ error: no match found
>>>>>>
$ cat check1
CHECK: abc
CHECK-SAME: def
CHECK-NEXT: ghi
CHECK-SAME: jkl
$ cat input1
; abc def
; ghI jkl
```
Some additional details related to the boilerplate:
* Enabling: The annotated input dump is enabled by `-dump-input`,
which can also be set via the `FILECHECK_OPTS` environment variable.
Accepted values are `help`, `always`, `fail`, or `never`. As shown
above, `help` describes the format of the dump. `always` is helpful
when you want to investigate a successful FileCheck run, perhaps for
an unexpected pass. `-dump-input-on-failure` and
`FILECHECK_DUMP_INPUT_ON_FAILURE` remain as a deprecated alias for
`-dump-input=fail`.
* Diagnostics: The usual diagnostics are not suppressed in this mode
and are printed first. For brevity in the example above, I've
omitted them using a sed command. Sometimes they're perfectly
sufficient, and then they make debugging quicker than if you were
forced to hunt through a dump of long input looking for the error.
If you think they'll get in the way sometimes, keep in mind that
it's pretty easy to grep for the start of the input dump, which is
`<<<`.
* Colored Annotations: The annotated input is colored if colors are
enabled (enabling colors can be forced using -color). For example,
errors are red. However, as in the above example, colors are not
vital to reading the annotations.
I don't know how to test color in the output, so any hints here would
be appreciated.
Reviewed By: george.karpenkov, zturner, probinson
Differential Revision: https://reviews.llvm.org/D52999
llvm-svn: 349418
When you define an instruction alias as a subclass of InstAlias, you
specify all the MC operands for the instruction it expands to, except
for operands that are tied to a previous one, which you leave out in
the expectation that the Tablegen output code will fill them in
automatically.
But the code in Tablegen's AsmWriter backend that skips over a tied
operand was doing it using 'if' instead of 'while', because it wasn't
expecting to find two tied operands in sequence.
So if an instruction updates a pair of registers in place, so that its
MC representation has two input operands tied to the output ones (for
example, Arm's UMLAL instruction), then any alias which wants to
expand to a special case of that instruction is likely to fail to
match, because the indices of subsequent operands will be off by one
in the generated printAliasInstr function.
This patch re-indents some existing code, so it's clearest when
viewed as a diff with whitespace changes ignored.
Reviewers: fhahn, rengolin, sdesmalen, atanasyan, asb, jholewinski, t.p.northover, kparzysz, craig.topper, stoklund
Reviewed By: rengolin
Subscribers: javed.absar, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D53816
llvm-svn: 349141
This is slightly involved, see the comments in the code.
The GN build now builds a functional lld!
Differential Revision: https://reviews.llvm.org/D55606
llvm-svn: 349096
One of the GCC based bots is objecting to a vector of const EncodingAndInst's:
In file included from /usr/include/c++/8/vector:64,
from /export/users/atombot/llvm/clang-atom-d525-fedora-rel/llvm/utils/TableGen/CodeGenInstruction.h:22,
from /export/users/atombot/llvm/clang-atom-d525-fedora-rel/llvm/utils/TableGen/FixedLenDecoderEmitter.cpp:15:
/usr/include/c++/8/bits/stl_vector.h: In instantiation of 'class std::vector<const {anonymous}::EncodingAndInst, std::allocator<const {anonymous}::EncodingAndInst> >':
/export/users/atombot/llvm/clang-atom-d525-fedora-rel/llvm/utils/TableGen/FixedLenDecoderEmitter.cpp:375:32: required from here
/usr/include/c++/8/bits/stl_vector.h:351:21: error: static assertion failed: std::vector must have a non-const, non-volatile value_type
static_assert(is_same<typename remove_cv<_Tp>::type, _Tp>::value,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/usr/include/c++/8/bits/stl_vector.h:354:21: error: static assertion failed: std::vector must have the same value_type as its allocator
static_assert(is_same<typename _Alloc::value_type, _Tp>::value,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
llvm-svn: 349046
Summary:
Separate the concept of an encoding from an instruction. This will enable
the definition of additional encodings for the same instruction which can
be used to support variable length instruction sets in the disassembler
(and potentially assembler but I'm not working towards that right now)
without causing an explosion in the number of Instruction records that
CodeGen then has to pick between.
Reviewers: bogner, charukcs
Reviewed By: bogner
Subscribers: kparzysz, llvm-commits
Differential Revision: https://reviews.llvm.org/D52366
llvm-svn: 349041
On Windows, we won't go into the `host_os != "win"` block, so `defines`
won't have been defined, and we'll run into an undefined identifier
error when we try to later append to it. Unconditionally define it at
the start and append to it everywhere else.
Differential Revision: https://reviews.llvm.org/D55617
llvm-svn: 348993
Version.inc.in processing has a potentially interesting part which I've punted
on for now (LLD_REVISION and LLD_REPOSITORY are set to empty strings for now).
lld now builds in the gn build. But no symlinks to it are created yet, so it
can't be meaningfully run yet.
Differential Revision: https://reviews.llvm.org/D55593
llvm-svn: 348945
The diff in targets.gni is due to me running `gn format` on all .gn and .gni
files.
llvm_enable_dia_sdk is in a gni file because I'm going to have to read it when
writing the lit invocations for check-llvm and check-lld. I've never had the
DIA sdk installed locally so I never tested building with it enabled -- it
probably doesn't Just Work and needs some path to diaguids.lib. We can finish
that once somebody needs it.
Differential Revision: https://reviews.llvm.org/D55591
llvm-svn: 348908
The tablegen setup for Target/X86 is a bit different from the CMake build: In
the CMake build, Target/X86/CMakeLists.txt has a single tablegen target that
does everything. But some of the generated files are only used privately by a
subproject, so in the GN build some of the tablegen invocations are
smaller-scoped, mostly for build cleanliness. (It helps also a tiny bit with
build parallelism since now e.g. the cpp files in MCTargetDesc can build after
just 3 .inc files are generated instead of being blocked on all 13. But it's
not a big win, since things depending on Target still need to wait for all 11,
even though all .inc file use is internal to lib/Target.)
Also add a build file for llc, since now all its dependencies have build files.
Differential Revision: https://reviews.llvm.org/D55524
llvm-svn: 348903
has_key has been removed in Python 3. The in comparison operator can be used
instead.
Differential Revision: https://reviews.llvm.org/D55310
llvm-svn: 348576
Tweak write_cmake_config.py to also handle variable references looking @FOO@
(matching CMake's configure_file() function), and make it replace '\' 'n' in
values with a newline literal since there's no good portable way of passing a
real newline literal on a command line.
Use that to process all the .def.in files in llvm/include/Config and add
llvm/lib/Target/BUILD.gn, which (indirectly, through llvm-c/Target.h) includes
them.
Differential Revision: https://reviews.llvm.org/D55184
llvm-svn: 348503
Split timestamp preservation tests into atime and mtime test, and skip
the former on NetBSD. When the filesystem is mounted noatime, NetBSD
not only inhibits implicit atime updates but also prevents setting atime
via utime(), causing the test to fail.
Differential Revision: https://reviews.llvm.org/D55271
llvm-svn: 348354
Summary:
This fixes support in DAGISelMatcher backend for DAG nodes with multiple
result values. Previously the order of results in selected DAG nodes always
matched the order of results in ISel patterns. After the change the order of
results matches the order of operands in OutOperandList instead.
For example, given this definition from the attached test case:
def INSTR : Instruction {
let OutOperandList = (outs GPR:$r1, GPR:$r0);
let InOperandList = (ins GPR:$t0, GPR:$t1);
let Pattern = [(set i32:$r0, i32:$r1, (udivrem i32:$t0, i32:$t1))];
}
the DAGISelMatcher backend currently produces a matcher that creates INSTR
nodes with the first result `$r0` and the second result `$r1`, contrary to the
order in the OutOperandList. The order of operands in OutOperandList does not
matter at all, which is unexpected (and unfortunate) because the order of
results of a DAG node does matters, perhaps a lot.
With this change, if the order in OutOperandList does not match the order in
Pattern, DAGISelMatcherGen emits CompleteMatch opcodes with the order of
results taken from OutOperandList. Backend writers can use it to express
result reorderings in TableGen.
If the order in OutOperandList matches the order in Pattern, the result of
DAGISelMatcherGen is unaffected.
Patch by Eugene Sharygin
Reviewers: andreadb, bjope, hfinkel, RKSimon, craig.topper
Reviewed By: craig.topper
Subscribers: nhaehnle, craig.topper, llvm-commits
Differential Revision: https://reviews.llvm.org/D55055
llvm-svn: 348326
No behavior change, just makes the script match the other scripts in
llvm/utils/gn/build.
Differential Revision: https://reviews.llvm.org/D55183
llvm-svn: 348190
Currently, variadic operands on an MCInst are assumed to be uses,
because they come after the defs. However, this is not always the case,
for example the Arm/Thumb LDM instructions write to a variable number of
registers.
This adds a property of instruction definitions which can be used to
mark variadic operands as defs. This only affects MCInst, because
MachineInstruction already tracks use/def per operand in each instance
of the instruction, so can already represent this.
This property can then be checked in MCInstrDesc, allowing us to remove
some special cases in ARMAsmParser::isITBlockTerminator.
Differential revision: https://reviews.llvm.org/D54853
llvm-svn: 348114
Before, #cmakedefine FOO resulted in #define FOO with a trailing space if FOO
was set to something truthy. Make it so that it's just #define FOO without a
trailing space.
No functional difference.
Differential Revision: https://reviews.llvm.org/D55172
llvm-svn: 348107
Before, the script had a bunch of special cases for #cmakedefine and
#cmakedefine01 and then did general variable substitution. Now, the script
always does general variable substitution for all lines and handles the special
cases afterwards.
This has no observable effect for the inputs we use, but is easier to explain
and slightly easier to implement.
Also mention to link to CMake's configure_file() in the docstring.
(The new behavior doesn't quite match CMake on lines like #cmakedefine ${FOO},
but nobody does that.)
Differential Revision: https://reviews.llvm.org/D55171
llvm-svn: 348106
This adds a script called build.py as well as a lit substitution
called %build that we can use to invoke it. The idea is that
this allows a lit test to build test inferiors without having
to worry about architecture / platform specific differences,
command line syntax, finding / configurationg a proper toolchain,
and other issues. They can simply write something like:
%build --arch=32 -o %t.exe %p/Inputs/foo.cpp
and it will just work. This paves the way for being able to
run lit tests with multiple configurations, platforms, and
compilers with a single test.
Differential Revision: https://reviews.llvm.org/D54914
llvm-svn: 348058
Simple predicates, such as those defined by `CheckRegOperandSimple` or
`CheckImmOperandSimple`, were not being negated when used with `CheckNot`.
This change fixes this issue by defining the previously declared methods to
handle simple predicates.
Differential revision: https://reviews.llvm.org/D55089
llvm-svn: 348034
Summary:
This simplifies writing predicates for pattern fragments that are
automatically re-associated or commuted.
For example, a followup patch adds patterns for fragments of the form
(add (shl $x, $y), $z) to the AMDGPU backend. Such patterns are
automatically commuted to (add $z, (shl $x, $y)), which makes it basically
impossible to refer to $x, $y, and $z generically in the PredicateCode.
With this change, the PredicateCode can refer to $x, $y, and $z simply
as `Operands[i]`.
Test confirmed that there are no changes to any of the generated files
when building all (non-experimental) targets.
Change-Id: I61c00ace7eed42c1d4edc4c5351174b56b77a79c
Reviewers: arsenm, rampitec, RKSimon, craig.topper, hfinkel, uweigand
Subscribers: wdng, tpr, llvm-commits
Differential Revision: https://reviews.llvm.org/D51994
llvm-svn: 347992
Also adds a boring build file for llvm/lib/BinaryFormat (needed by llvm/lib/IR).
lib/IR marks Attributes and IntrinsicsEnum as public_deps (because IR's public
headers include the generated .inc files), so projects depending on lib/IR will
implicitly depend on them being generated. As a consequence, most targets won't
have to explicitly list a dependency on these tablegen steps (contrast with
intrinsics_gen in the cmake build).
This doesn't yet have the optimization where tablegen's output is only updated
if it's changed.
Differential Revision: https://reviews.llvm.org/D55028#inline-486755
llvm-svn: 347927
Also fix a missing file in lib/Support/BUILD.gn found by the script.
The script is very stupid and assumes that CMakeLists.txt follow the standard
LLVM CMakeLists.txt formatting with one cpp source file per line. Despite its
simplicity, it works well in practice.
It would be nice if it also checked deps and maybe automatically applied its
suggestions.
Differential Revision: https://reviews.llvm.org/D54930
llvm-svn: 347925
When tablegen detects that there exist two subregister compositions that
result in the same value for some register, it will emit a warning. This
kind of an overlap in compositions should only happen when it is caused
by a user-defined composition. It can happen, however, that the user-
defined composition is not identically equal to another one, but it does
produce the same value for one or more registers. In such cases suppress
the warning.
This patch is to silence the warning when building the System Z backend
after D50725.
Differential Revision: https://reviews.llvm.org/D50977
llvm-svn: 347894
"svn update --depth=..." is, annoyingly, not a specification of the
desired depth, but rather a _limit_ added on top of the "sticky" depth
in the working-directory. However, if the directory doesn't exist yet,
then it sets the sticky depth of the new directory entries.
Unfortunately, the svn command-line has no way of expanding the depth
of a directory from "empty" to "files", without also removing any
already-expanded subdirectories. The way you're supposed to increase
the depth of an existing directory is via --set-depth, but
--set-depth=files will also remove any subdirs which were already
requested.
This change avoids getting into the state of ever needing to increase
the depth of an existing directory from "empty" to "files" in the
first place, by:
1. Use svn update --depth=files, not --depth=immediates.
The latter has the effect of checking out the subdirectories and
marking them as depth=empty. The former excludes sub-directories from
the list of entries, which avoids the problem.
2. Explicitly populate missing parent directories.
Using --parents seemed nice and easy, but it marks the parent dirs as
depth=empty. Instead, check out parents explicitly if they're missing.
llvm-svn: 347883
This patch adds the ability to specify via tablegen which processor resources
are load/store queue resources.
A new tablegen class named MemoryQueue can be optionally used to mark resources
that model load/store queues. Information about the load/store queue is
collected at 'CodeGenSchedule' stage, and analyzed by the 'SubtargetEmitter' to
initialize two new fields in struct MCExtraProcessorInfo named `LoadQueueID` and
`StoreQueueID`. Those two fields are identifiers for buffered resources used to
describe the load queue and the store queue.
Field `BufferSize` is interpreted as the number of entries in the queue, while
the number of units is a throughput indicator (i.e. number of available pickers
for loads/stores).
At construction time, LSUnit in llvm-mca checks for the presence of extra
processor information (i.e. MCExtraProcessorInfo) in the scheduling model. If
that information is available, and fields LoadQueueID and StoreQueueID are set
to a value different than zero (i.e. the invalid processor resource index), then
LSUnit initializes its LoadQueue/StoreQueue based on the BufferSize value
declared by the two processor resources.
With this patch, we more accurately track dynamic dispatch stalls caused by the
lack of LS tokens (i.e. load/store queue full). This is also shown by the
differences in two BdVer2 tests. Stalls that were previously classified as
generic SCHEDULER FULL stalls, are not correctly classified either as "load
queue full" or "store queue full".
About the differences in the -scheduler-stats view: those differences are
expected, because entries in the load/store queue are not released at
instruction issue stage. Instead, those are released at instruction executed
stage. This is the main reason why for the modified tests, the load/store
queues gets full before PdEx is full.
Differential Revision: https://reviews.llvm.org/D54957
llvm-svn: 347857
On python3, use bytes for reading and applying the patch file, rather
than str. This fixes encoding issues when applying patches with
python3.X (reported by zturner).
Also, simplify and speed up "svn update" via svn's "--parents"
argument, instead of manually computing and supplying the list of
parent directories to update.
llvm-svn: 347766
There are quite strong constraints on how you can use the TIED_TO
constraint between MC operands, many of which are currently not
checked until compiler run time.
MachineVerifier enforces that operands can only be tied together in
pairs (no three-way ties), and MachineInstr::tieOperands enforces that
one of the tied operands must be an output operand (def) and the other
must be an input operand (use).
Now we check these at TableGen time, so that if you violate any of
them in a new instruction definition, you find out immediately,
instead of having to wait until you compile something that makes code
generation hit one of those assertions.
Also in this commit, all the error reports in ParseConstraint now
include the name and source location of the def where the problem
happened, so that if you do trigger any of these errors, it's easier
to find the part of your TableGen input where you made the mistake.
The trunk sources already build successfully with this additional
error check, so I think no in-tree target has any of these problems.
Reviewers: fhahn, lhames, nhaehnle, MatzeB
Reviewed By: MatzeB
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D53815
llvm-svn: 347743
Adds build files for:
- llvm/lib/DebugInfo/CodeView
- llvm/lib/DebugInfo/MSF
- llvm/lib/MC
- llvm/lib/TableGen
- llvm/utils/TableGen
All the build files just list sources and deps and are uninteresting.
Differential Revision: https://reviews.llvm.org/D54931
llvm-svn: 347702
This arose when I was trying to have a substitution which invoked a
python script P, and that python script tried to invoke clang-cl (or
even cl). Since we invoke P with a custom environment, it doesn't
inherit the environment of the parent, and then when we go to invoke
clang-cl, it's unable to find the MSVC installation directory. There
were many more I could have passed through which are set by vcvarsall,
but I tried to keep it simple and only pass through the important ones.
Differential Revision: https://reviews.llvm.org/D54963
llvm-svn: 347691
The comments at the top of
llvm/utils/gn/secondary/llvm/include/llvm/Config/BUILD.gn and
llvm/utils/gn/build/write_cmake_config.py should explain the main bits
happening in this patch. The main parts here are that these headers are
generated at build time, not gn time, and that currently they don't do any
actual feature checks but just hardcode most things based on the current OS,
which seems to work well enough. If this stops being enough, the feature checks
should each be their own action writing the result to somewhere, and the config
write step should depend on those checks (so that they can run in parallel and
as part of the build) -- utils/llvm/gn/README.rst already has some more words
on that in "Philosophy".
(write_cmake_config.py is also going to be used to write clang's
clang/include/clang/Config/config.h)
This also adds a few files for linking to system libraries in a consistent way
if needed in llvm/utils/gn/build/libs (and moves pthread to that model).0
I'm also adding llvm/utils/gn/secondary/llvm/lib/Target/targets.gni in this
patch because $native_arch is needed for writing llvm-config.h -- the rest of
it will be used later, when the build files for llvm/lib/Target get added. That
file describes how to select which archs to build.
As a demo, also add a build file for llvm-undname and make it the default build
target (it depends on everything that can currently be built).
Differential Revision: https://reviews.llvm.org/D54678
llvm-svn: 347636
`llvm-mca` relies on the predicates to be based on `MCSchedPredicate` in order
to resolve the scheduling for variant instructions. Otherwise, it aborts
the building of the instruction model early.
However, the scheduling model emitter in `TableGen` gives up too soon, unless
all processors use only such predicates.
In order to allow more processors to be used with `llvm-mca`, this patch
emits scheduling transitions if any processor uses these predicates. The
transition emitted for the processors using legacy predicates is the one
specified with `NoSchedPred`, which is based on `MCSchedPredicate`.
Preferably, `llvm-mca` should instead assume a reasonable default when a
variant transition is not based on `MCSchedPredicate` for a given processor.
This issue should be revisited in the future.
Differential revision: https://reviews.llvm.org/D54648
llvm-svn: 347504
Otherwise, the clang analyzer tests fail on Windows when attempting to
unpickle AnalyzerTest objects in the worker processes. The pattern of,
add to path, import, remove from path, serialize, deserialize, doesn't
work. Once something gets added to the path, if we want to move it
across the wire for multiprocessing, we need to keep the module on
sys.path.
llvm-svn: 347254
Recently I tried to port LLDB's lit configuration files over to use a
on the surface, but broke some cases that weren't broken before and also
exposed some additional problems with the old approach that we were just
getting lucky with.
When we set up a lit environment, the goal is to make it as hermetic as
possible. We should not be relying on PATH and enabling the use of
arbitrary shell commands. Instead, only whitelisted commands should be
allowed. These are, generally speaking, the lit builtins such as echo,
cd, etc, as well as anything for which substitutions have been
explicitly set up for. These substitutions should map to the build
output directory, but in some cases it's useful to be able to override
this (for example to point to an installed tools directory).
This is, of course, how it's supposed to work. What was actually
happening is that we were bringing in PATH and LD_LIBRARY_PATH and then
just running the given run line as a shell command. This led to problems
such as finding the wrong version of clang-cl on PATH since it wasn't
even a substitution, and flakiness / non-determinism since the
environment the tests were running in would change per-machine. On the
other hand, it also made other things possible. For example, we had some
tests that were explicitly running cl.exe and link.exe instead of
clang-cl and lld-link and the only reason it worked at all is because it
was finding them on PATH. Unfortunately we can't entirely get rid of
these tests, because they support a few things in debug info that
clang-cl and lld-link don't (notably, the LF_UDT_MOD_SRC_LINE record
which makes some of the tests fail.
The high level changes introduced in this patch are:
1. Removal of functionality - The lit test suite no longer respects
LLDB_TEST_C_COMPILER and LLDB_TEST_CXX_COMPILER. This means there is no
more support for gcc, but nobody was using this anyway (note: The
functionality is still there for the dotest suite, just not the lit test
suite). There is no longer a single substitution %cxx and %cc which maps
to <arbitrary-compiler>, you now explicitly specify the compiler with a
substitution like %clang or %clangxx or %clang_cl. We can revisit this
in the future when someone needs gcc.
2. Introduction of the LLDB_LIT_TOOLS_DIR directory. This does in spirit
what LLDB_TEST_C_COMPILER and LLDB_TEST_CXX_COMPILER used to do, but now
more friendly. If this is not specified, all tools are expected to be
the just-built tools. If it is specified, the tools which are not
themselves being tested but are being used to construct and run checks
(e.g. clang, FileCheck, llvm-mc, etc) will be searched for in this
directory first, then the build output directory.
3. Changes to core llvm lit files. The use_lld() and use_clang()
functions were introduced long ago in anticipation of using them in
lldb, but since they were never actually used anywhere but their
respective problems, there were some issues to be resolved regarding
generality and ability to use them outside their project.
4. Changes to .test files - These are all just replacing things like
clang-cl with %clang_cl and %cxx with %clangxx, etc.
5. Changes to lit.cfg.py - Previously we would load up some system
environment variables and then add some new things to them. Then do a
bunch of work building out our own substitutions. First, we delete the
system environment variable code, making the environment hermetic. Then,
we refactor the substitution logic into two separate helper functions,
one which sets up substitutions for the tools we want to test (which
must come from the build output directory), and another which sets up
substitutions for support tools (like compilers, etc).
6. New substitutions for MSVC -- Previously we relied on location of
MSVC by bringing in the entire parent's PATH and letting
subprocess.Popen just run the command line. Now we set up real
substitutions that should have the same effect. We use PATH to find
them, and then look for INCLUDE and LIB to construct a substitution
command line with appropriate /I and /LIBPATH: arguments. The nice thing
about this is that it opens the door to having separate %msvc-cl32 and
%msvc-cl64 substitutions, rather than only requiring the user to run
vcvars first. Because we can deduce the path to 32-bit libraries from
64-bit library directories, and vice versa. Without these substitutions
this would have been impossible.
Differential Revision: https://reviews.llvm.org/D54567
llvm-svn: 347216
See "GN build roundtable summary; adding GN build files to the repo" on
llvm-dev and cfe-dev for discussion.
In particular, this build is completely unsupported. People adding new files to
LLVM are not expected to update the GN build files, and reviewers are not
supposed to request the gn build files to be updated.
This adds just enough to be able to build llvm/lib/Demangle. It requires using
a monorepo.
This adds a few build config options you can set in args.gn
(`gn args out/foo --list` for all):
- is_debug = true to enable debug builds (defaults to release)
- llvm_enable_assertions to toggle assertions (defaults to true)
- clang_base_path, if set an absolute path to a locally-built clang to be used
as host compiler
Differential Revision: https://reviews.llvm.org/D54345
llvm-svn: 347128
Also, support modifications to toplevel files in git (which need to be
committed to "monorepo-root" in svn).
Differential Revision: https://reviews.llvm.org/D54341
llvm-svn: 347103
A call to @llvm.trap can be expected to be cold (i.e. unlikely to be
reached in a normal program execution).
Outlining paths which unconditionally trap is an important memory
saving. As the hot/cold splitting pass (imho) should not treat all
noreturn calls as cold, explicitly mark @llvm.trap cold so that it can
be outlined.
Split out of https://reviews.llvm.org/D54244.
Differential Revision: https://reviews.llvm.org/D54329
llvm-svn: 346885
Summary:
This reverts r346122 now that the failing tests have been
disabled. Depends on D54353.
Reviewers: aheejin, dschuff
Subscribers: fedor.sergeev, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D54354
llvm-svn: 346559
This change updates the release script to use svnmucc to create all
the branches with one commit.
This will ensure that the git tag won't bounce around if the git
migration runs in-between separate commits creating a branch.
Additionally, update the list of projects to include all of the
projects in the monorepo, plus test-suite.
Differential Revision: https://reviews.llvm.org/D53467
llvm-svn: 346550
Summary:
This simplifies the code and moves everything to tablegen for consistency. This
also prepares the ground for adding issue counters.
Reviewers: gchatelet, john.brawn, jsji
Subscribers: nemanjai, mgorny, javed.absar, kbarton, tschuett, llvm-commits
Differential Revision: https://reviews.llvm.org/D54297
llvm-svn: 346489
This feature makes it easy to tune FileCheck diagnostic output when
running the test suite via ninja, a bot, or an IDE. For example:
```
$ FILECHECK_OPTS='-color -v -dump-input-on-failure' \
LIT_FILTER='OpenMP/for_codegen.cpp' ninja check-clang \
| less -R
```
Reviewed By: probinson
Differential Revision: https://reviews.llvm.org/D53517
llvm-svn: 346272
SmallVector was changed to store a begin and a size rather than a
begin and an end a while back. Update the formatter to look at the
correct members.
llvm-svn: 346252
This patch disables exceptions in Microsoft STL when exception
handling is not enabled in Benchmark project. It fixes Windows
builds that were failing due to C4530 warnings thrown by MS STL.
Differential Revision: https://reviews.llvm.org/D52998
llvm-svn: 346237
A year or so ago, I re-wrote most of the lit infrastructure in LLVM so
that it wasn't so boilerplate-y. I added lots of common helper type
stuff, simplifed usage patterns, and made the code more elegant and
maintainable.
We migrated to this in LLVM, clang, and lld's lit files, but not in
LLDBs. This started to bite me recently, as the 4 most recent times I
tried to run the lit test suite in LLDB on a fresh checkout the first
thing that would happen is that python would just start crashing with
unhelpful backtraces and I would have to spend time investigating.
You can reproduce this today by doing a fresh cmake generation, doing
ninja lldb and then python bin/llvm-lit.py -sv ~/lldb/lit/SymbolFile at
which point you'll get a segfault that tells you nothing about what your
problem is.
I started trying to fix the issues with bandaids, but it became clear
that the proper solution was to just bring in the work I did in the rest
of the projects. The side benefit of this is that the lit configuration
files become much cleaner and more understandable as a result.
Differential Revision: https://reviews.llvm.org/D54009
llvm-svn: 346008
Summary:
As a bonus, this arguably improves the code by making it simpler.
gcc 8 on Ubuntu 18.10 reports the following:
==39667==ERROR: AddressSanitizer: stack-use-after-scope on address 0x7fffffff8ae0 at pc 0x555555dbfc68 bp 0x7fffffff8760 sp 0x7fffffff8750
WRITE of size 8 at 0x7fffffff8ae0 thread T0
#0 0x555555dbfc67 in std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> >::_Alloc_hider::_Alloc_hider(char*, std::allocator<char>&&) /usr/include/c++/8/bits/basic_string.h:149
#1 0x555555dbfc67 in std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> >::basic_string(std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> >&&) /usr/include/c++/8/bits/basic_string.h:542
#2 0x555555dbfc67 in std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> > std::operator+<char, std::char_traits<char>, std::allocator<char> >(char const*, std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> >&&) /usr/include/c++/8/bits/basic_string.h:6009
#3 0x555555dbfc67 in searchableFieldType /home/nha/amd/build/san/llvm-src/utils/TableGen/SearchableTableEmitter.cpp:168
(...)
Address 0x7fffffff8ae0 is located in stack of thread T0 at offset 864 in frame
#0 0x555555dbef3f in searchableFieldType /home/nha/amd/build/san/llvm-src/utils/TableGen/SearchableTableEmitter.cpp:148
Reviewers: fhahn, simon_tatham, kparzysz
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D53931
llvm-svn: 345749
Before this patch, class PredicateExpander only knew how to expand simple
predicates that performed checks on instruction operands.
In particular, the new scheduling predicate syntax was not rich enough to
express checks like this one:
Foo(MI->getOperand(0).getImm()) == ExpectedVal;
Here, the immediate operand value at index zero is passed in input to function
Foo, and ExpectedVal is compared against the value returned by function Foo.
While this predicate pattern doesn't show up in any X86 model, it shows up in
other upstream targets. So, being able to support those predicates is
fundamental if we want to be able to modernize all the scheduling models
upstream.
With this patch, we allow users to specify if a register/immediate operand value
needs to be passed in input to a function as part of the predicate check. Now,
register/immediate operand checks all derive from base class CheckOperandBase.
This patch also changes where TIIPredicate definitions are expanded by the
instructon info emitter. Before, definitions were expanded in class
XXXGenInstrInfo (where XXX is a target name).
With the introduction of this new syntax, we may want to have TIIPredicates
expanded directly in XXXInstrInfo. That is because functions used by the new
operand predicates may only exist in the derived class (i.e. XXXInstrInfo).
This patch is a non functional change for the existing scheduling models.
In future, we will be able to use this richer syntax to better describe complex
scheduling predicates, and expose them to llvm-mca.
Differential Revision: https://reviews.llvm.org/D53880
llvm-svn: 345714
The intent here was to run check-llvm/check-clang in the instrumented
clang's build directory, not the maybe-not-yet-created uninstrumented
clang's. Oops. :)
llvm-svn: 345461
Depending on who you ask, PGO grants a 15%-25% improvement in build
times when using clang. Sadly, hooking everything up properly to
generate a profile and apply it to clang isn't always straightforward.
This script (and the accompanying docs) aim to make this process easier;
ideally, a single invocation of the given script.
In terms of testing, I've got a cronjob on my Debian box that's meant to
run this a few times per week, and I tried manually running it on a puny
Gentoo box I have (four whole Atom cores!). Nothing obviously broke.
¯\_(ツ)_/¯
I don't know if we have a Python style guide, so I just shoved this
through yapf with all the defaults on.
Finally, though the focus is clang at the moment, the hope is that this
is easily applicable to other LLVM-y tools with minimal effort (e.g.
lld, opt, ...). Hence, this lives in llvm/utils and tries to be somewhat
ambiguous about naming.
Differential Revision: https://reviews.llvm.org/D53598
llvm-svn: 345427
Currently, the regular expression that matches the lines of assembly for PPC LE
(ELFv2) does not work for the assembly for BE (ELFv1). This patch fixes it.
Differential revision: https://reviews.llvm.org/D53059
llvm-svn: 345363
Summary:
The pfm counters are now in the ExegesisTarget rather than the
MCSchedModel (PR39165).
This also compresses the pfm counter tables (PR37068).
Reviewers: RKSimon, gchatelet
Subscribers: mgrang, llvm-commits
Differential Revision: https://reviews.llvm.org/D52932
llvm-svn: 345243
(Relands r344930, reverted in r344935, and now hopefully fixed for
Windows.)
While this change specifically targets FileCheck, it affects any tool
using the same SourceMgr facilities.
Previously, -color was documented in FileCheck's -help output, but
-color had no effect. Now, -color obeys its documentation: it forces
colors to be used in FileCheck diagnostics even when stderr is not a
terminal.
-color is especially helpful when combined with FileCheck's -v, which
can produce a long series of diagnostics that you might wish to pipe
to a pager, such as less -R. The WithColor extensions here will also
help to clean up color usage in FileCheck's annotated dump of input,
which is proposed in D52999.
Reviewed By: JDevlieghere, zturner
Differential Revision: https://reviews.llvm.org/D53419
llvm-svn: 345202
Summary:
Some targets have very long encodings and uint64_t isn't sufficient. uint128_t
isn't portable so such targets need to use an object instead.
There is one catch with this at the moment, no string of bits extracted
from the encoding may exceeed 64-bits. Fields are still permitted to
exceed 64-bits so long as they aren't one contiguous string of bits. If
this proves to be a problem then we can modify the generation of
fieldFromInstruction() calls to account for it but for now I've added an
assertion for this.
InsnType must either be integral or an APInt-like object that must:
* Have a static const max_size_in_bits equal to the number of bits in the encoding.
* be default-constructible and copy-constructible
* be constructible from a uint64_t (this is the key area the interface deviates
from APInt since this constructor does not take the bit width)
* be constructible from an APInt (this can be private)
* be convertible to uint64_t
* Support the ~, &,, ==, !=, and |= operators with other objects of the same type
* Support shift (<<, >>) with signed and unsigned integers on the RHS
* Support put (<<) to raw_ostream&
Reviewers: bogner, charukcs
Subscribers: nhaehnle, llvm-commits
Differential Revision: https://reviews.llvm.org/D52100
llvm-svn: 345056
Some versions of bash.exe, for example WSL's version expect paths in the form
/mnt/c/path/to/dir rather than c:\\path\\to\\dir so will cause failures
for any tests that require an external shell if used by lit. If we're on
Windows and looking for an external shell, check that the found version
of bash is able to parse a native path before returning that version.
This patch also partially reverts the behaviour of r228221 by
restoring the warning if bash cannot be found. This shouldn't pollute
the lit stderr anymore as we're now using internal shell by default on
Windows. If someone is explicitly specifying to use an external shell, it's
probably worth alerting them to the fact that bash could not be found.
Differential Revision: https://reviews.llvm.org/D52831
llvm-svn: 345019
Summary:
Replace its functionality with a TableGen InstrInfo relational
instruction mapping. Although arguably more complex than the TableGen
backend, the relational mapping is a smaller maintenance burden than a
TableGen backend.
Reviewers: aardappel, aheejin, dschuff
Subscribers: mgorny, sbc100, jgravelle-google, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D53307
llvm-svn: 344962
The vectoriser's debug log prints VPlan digraphs, but it's a bit
cumbersome to extract them and render them into PNG images. This script
does exactly that, being careful enough to extract all individual plans,
name them appropriately and save in either .dot or .png files.
Example usage:
$ opt -O3 -debug-only=loop-vectorize file.ll -S -o /dev/null 2> debug.log
$ $LLVM_SRC/utils/extract_vplan.py < debug.log
Exporting VF1UF1 to DOT: VPlanVF1UF1.dot
Exporting VF24UF1 to DOT: VPlanVF24UF1.dot
$ $LLVM_SRC/utils/extract_vplan.py --png < debug.log
Exporting VF1UF1 to PNG via dot: VPlanVF1UF1.png
Exporting VF24UF1 to PNG via dot: VPlanVF24UF1.png
$ xdot VPlanVF1UF1.dot
Differential Revision: https://reviews.llvm.org/D53142
llvm-svn: 344599
This patch adds the ability to identify instructions that are "move elimination
candidates". It also allows scheduling models to describe processor register
files that allow move elimination.
A move elimination candidate is an instruction that can be eliminated at
register renaming stage.
Each subtarget can specify which instructions are move elimination candidates
with the help of tablegen class "IsOptimizableRegisterMove" (see
llvm/Target/TargetInstrPredicate.td).
For example, on X86, BtVer2 allows both GPR and MMX/SSE moves to be eliminated.
The definition of 'IsOptimizableRegisterMove' for BtVer2 looks like this:
```
def : IsOptimizableRegisterMove<[
InstructionEquivalenceClass<[
// GPR variants.
MOV32rr, MOV64rr,
// MMX variants.
MMX_MOVQ64rr,
// SSE variants.
MOVAPSrr, MOVUPSrr,
MOVAPDrr, MOVUPDrr,
MOVDQArr, MOVDQUrr,
// AVX variants.
VMOVAPSrr, VMOVUPSrr,
VMOVAPDrr, VMOVUPDrr,
VMOVDQArr, VMOVDQUrr
], CheckNot<CheckSameRegOperand<0, 1>> >
]>;
```
Definitions of IsOptimizableRegisterMove from processor models of a same
Target are processed by the SubtargetEmitter to auto-generate a target-specific
override for each of the following predicate methods:
```
bool TargetSubtargetInfo::isOptimizableRegisterMove(const MachineInstr *MI)
const;
bool MCInstrAnalysis::isOptimizableRegisterMove(const MCInst &MI, unsigned
CPUID) const;
```
By default, those methods return false (i.e. conservatively assume that there
are no move elimination candidates).
Tablegen class RegisterFile has been extended with the following information:
- The set of register classes that allow move elimination.
- Maxium number of moves that can be eliminated every cycle.
- Whether move elimination is restricted to moves from registers that are
known to be zero.
This patch is structured in three part:
A first part (which is mostly boilerplate) adds the new
'isOptimizableRegisterMove' target hooks, and extends existing register file
descriptors in MC by introducing new fields to describe properties related to
move elimination.
A second part, uses the new tablegen constructs to describe move elimination in
the BtVer2 scheduling model.
A third part, teaches llm-mca how to query the new 'isOptimizableRegisterMove'
hook to mark instructions that are candidates for move elimination. It also
teaches class RegisterFile how to describe constraints on move elimination at
PRF granularity.
llvm-mca tests for btver2 show differences before/after this patch.
Differential Revision: https://reviews.llvm.org/D53134
llvm-svn: 344334
Summary:
The script to generate code coverage reports supports passing filter paths to llvm-cov when generating the HTML reports, but doesn't pass those paths to the summary generation as well. This results in a summary report that doesn't match the HTML report.
This patch addresses the problem by also passing the filter paths to the summary report generation.
Reviewers: vsk
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D53110
llvm-svn: 344217
This patch fixes three issues.
The first is that we didn't consider files which are explicitly
set to eolstyle CRLF in the repo, and there are a handful of
these.
Second is that dos2unix doesn't have a -q option in GnuWin32,
so this codepath wasn't working properly.
Finally with newer versions of Python (or newer versions of Git,
or some combination of the two) patches can't be applied when
we treat stdin as text, because Python silently undoes all the
work we did to convert the newlines to LF using dos2unix by
using universal_newlines=True and then converting them *back*
to CRLF. So we need to add a way to force stdin to be treated
as binary, and use it when LF-newlines are required.
Differential Revision: https://reviews.llvm.org/D51444
llvm-svn: 344095
Summary:
The predicate function is added in InlinePatternFragments, no need to
do it here. As a result, all uses of addPredicateFn are located in
InlinePatternFragments.
Test confirmed that there are no changes to generated files when
building all (non-experimental) targets.
Change-Id: I720e42e045ca596eb0aa339fb61adf6fe71034d5
Reviewers: arsenm, rampitec, RKSimon, craig.topper, hfinkel, uweigand
Subscribers: wdng, llvm-commits
Differential Revision: https://reviews.llvm.org/D51993
llvm-svn: 343977
There are a few leftovers in rL343163 which span two lines. This commit
changes these llvm::sort(C.begin(), C.end, ...) to llvm::sort(C, ...)
llvm-svn: 343426
If any prefixes have been specified on the RUN lines that do not end up
ever actually getting printed, raise an Error. This is either an
indication that the run lines just need cleaning up, or that something
is more fundamentally wrong with the test.
Also raise an Error if there are any blocks which cannot be checked
because they are not uniquely covered by a prefix.
Fixed up a couple of tests where the extra checking flagged up issues.
Differential Revision: https://reviews.llvm.org/D48276
llvm-svn: 343332
Insert empty blocks to cause the positions of matching blocks to match
across lists where possible so that later stages of the algorithm can
actually identify them as being identical.
Regenerated all tests with this change.
Differential Revision: https://reviews.llvm.org/D52560
llvm-svn: 343331
Summary: This directory was missing from the lit package on pypi.org.
Reviewers: ddunbar
Subscribers: delcypher, llvm-commits
Differential Revision: https://reviews.llvm.org/D51670
llvm-svn: 343115
Summary:
By using the existing isCodeGenOnly bit in the tablegen defs, as
suggested by tlively in https://reviews.llvm.org/D51662
Tested: llvm-lit -v `find test -name WebAssembly`
Reviewers: tlively
Subscribers: dschuff, sbc100, jgravelle-google, aheejin, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D52373
llvm-svn: 342772
Summary:
This ensures we have the non-register version of the instruction.
The stack version of call_indirect now wants a type index argument,
so that has been added in the existing tests.
Tested:
llvm-lit -v `find test -name WebAssembly`
Reviewers: dschuff
Subscribers: sbc100, jgravelle-google, aheejin, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D51662
llvm-svn: 342753
Summary:
This reverts r329475 which applied to googlemock. This change makes the
googlemock implementation in LLVM dependent on LLVM unnecessarily.
Reviewers: echristo, mgrang
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D52287
llvm-svn: 342612
The reason why build #25777 might have failed is because the SmallVector move
constructor is _not_ noexcept, and the stl implementation used by that buildbot
calls _VSTD::move_if_noexcept() (according to the backtrace).
OpcodeInfo has a default move constructor, and the copy constructor is deleted.
However, as far as I can see, SmallVector doesn't declare a noexcept move
constructor. So, what I believe it is happening here is that,
_VSTD::move_if_noexcept() returns an lvalue reference and not an rvalue
reference.
This eventually triggers a copy that fails to compile.
Hopefully, using a std::vector instead of SmallVector (as it was originally
suggested by Simon in the code review) should be enough to unbreak the buildbot.
llvm-svn: 342561
This patch adds the ability for processor models to describe dependency breaking
instructions.
Different processors may specify a different set of dependency-breaking
instructions.
That means, we cannot assume that all processors of the same target would use
the same rules to classify dependency breaking instructions.
The main goal of this patch is to provide the means to describe dependency
breaking instructions directly via tablegen, and have the following
TargetSubtargetInfo hooks redefined in overrides by tabegen'd
XXXGenSubtargetInfo classes (here, XXX is a Target name).
```
virtual bool isZeroIdiom(const MachineInstr *MI, APInt &Mask) const {
return false;
}
virtual bool isDependencyBreaking(const MachineInstr *MI, APInt &Mask) const {
return isZeroIdiom(MI);
}
```
An instruction MI is a dependency-breaking instruction if a call to method
isDependencyBreaking(MI) on the STI (TargetSubtargetInfo object) evaluates to
true. Similarly, an instruction MI is a special case of zero-idiom dependency
breaking instruction if a call to STI.isZeroIdiom(MI) returns true.
The extra APInt is used for those targets that may want to select which machine
operands have their dependency broken (see comments in code).
Note that by default, subtargets don't know about the existence of
dependency-breaking. In the absence of external information, those method calls
would always return false.
A new tablegen class named STIPredicate has been added by this patch to let
processor models classify instructions that have properties in common. The idea
is that, a MCInstrPredicate definition can be used to "generate" an instruction
equivalence class, with the idea that instructions of a same class all have a
property in common.
STIPredicate definitions are essentially a collection of instruction equivalence
classes.
Also, different processor models can specify a different variant of the same
STIPredicate with different rules (i.e. predicates) to classify instructions.
Tablegen backends (in this particular case, the SubtargetEmitter) will be able
to process STIPredicate definitions, and automatically generate functions in
XXXGenSubtargetInfo.
This patch introduces two special kind of STIPredicate classes named
IsZeroIdiomFunction and IsDepBreakingFunction in tablegen. It also adds a
definition for those in the BtVer2 scheduling model only.
This patch supersedes the one committed at r338372 (phabricator review: D49310).
The main advantages are:
- We can describe subtarget predicates via tablegen using STIPredicates.
- We can describe zero-idioms / dep-breaking instructions directly via
tablegen in the scheduling models.
In future, the STIPredicates framework can be used for solving other problems.
Examples of future developments are:
- Teach how to identify optimizable register-register moves
- Teach how to identify slow LEA instructions (each subtarget defining its own
concept of "slow" LEA).
- Teach how to identify instructions that have undocumented false dependencies
on the output registers on some processors only.
It is also (in my opinion) an elegant way to expose knowledge to both external
tools like llvm-mca, and codegen passes.
For example, machine schedulers in LLVM could reuse that information when
internally constructing the data dependency graph for a code region.
This new design feature is also an "opt-in" feature. Processor models don't have
to use the new STIPredicates. It has all been designed to be as unintrusive as
possible.
Differential Revision: https://reviews.llvm.org/D52174
llvm-svn: 342555
This fixes building for Windows on ARM, with MinGW headers.
(Building for Windows on ARM with Windows SDK still is unsupported
by the benchmark library.)
Differential Revision: https://reviews.llvm.org/D52262
llvm-svn: 342549
Further extension to D51035, this patch avoids all repeated predicates[] matching by caching as it collects the patterns that have multiple variants.
Saves around 25secs in debug builds of x86 -gen-dag-isel.
Differential Revision: https://reviews.llvm.org/D51839
llvm-svn: 342467
The windows SDK headers don't have self-consistent casing anyway,
so we consistently use lowercase for these in other places, in order
to fix crosscompilation with mingw headers.
This applies an upstream commit:
5261307982
Differential Revision: https://reviews.llvm.org/D52181
llvm-svn: 342450
Summary:
The multiprocess module uses pickling to transfer
information between processes and does not know how to pickle
the class created in the lit.cfg file and thus the example
fails.
Implement ManyTests in a separate file and import for the
example test passes
Patch by Nathan Lanza <nathan@lanza.io>
Differential Revision: https://reviews.llvm.org/D51328
llvm-svn: 342269
Summary: This is the only test that is still failing on Windows - or rather, it is expected to fail on the bots, but passes on the new bot that we're preparing causing a failure, so I'm going to disable it. Since the test has rarely, if ever, passed on the bots, this should have the same effect and it will unblock the creation of the new bot.
Reviewers: asmith, delcypher, zturner
Subscribers: stella.stamenova, llvm-commits
Differential Revision: https://reviews.llvm.org/D51871
llvm-svn: 341856
`MSVC` is true for clang-cl, but `"${CMAKE_CXX_COMPILER_ID}" STREQUAL
"MSVC"` is false, so we would enable -Wall, which means -Weverything
with clang-cl, and we get tons of undesired warnings.
Use the simpler condition to fix things.
llvm-svn: 341717
- Refactor/rewrite most of the code. Also make sure it passes
pycodestyle/pyflakes now
- Add a new mode that performs bisection on the search space. This
should be faster in the common case where there is only a small number
of files or functions actually leading to failure.
The previous sequential behavior can still be accessed via `--seq`.
llvm-svn: 341679
This patch applies upstream commit:
f0901417c8
Tim Northover pointed out that benchmark build might be broken on 32-bit
macOS. This commit by Roman Lebedev (lebedev.ri) resolves the issue.
Reviewed By: lebedev.ri
Differential Revision: https://reviews.llvm.org/D51677
llvm-svn: 341469
Summary:
The python executable may not exist on all systems so use sys.executable
instead.
Reviewers: ddunbar, stella.stamenova
Subscribers: delcypher, llvm-commits
Differential Revision: https://reviews.llvm.org/D51511
llvm-svn: 341244
Serge Guelton