The parsing for -Rpass= had been factored into the function
GenerateOptimizationRemarkRegex, but at the time I forgot to remove
the original code that just handled OPT_Rpass_EQ.
llvm-svn: 211122
Summary:
These two flags are in the same family as -Rpass, but are used in
different situations.
-Rpass-missed is used by optimizers to inform the user when they tried
to apply an optimization but couldn't (or wouldn't).
-Rpass-analysis is used by optimizers to report analysis results back
to the user (e.g., why the transformation could not be applied).
Depends on D3682.
Reviewers: rsmith
Subscribers: cfe-commits
Differential Revision: http://reviews.llvm.org/D3683
llvm-svn: 209839
It was set by default on Darwin in r198655. The same usability issues
with DTrace and LLDB apply to FreeBSD, so set it by default there too.
rdar://problem/15758808
http://llvm.org/pr19676
Differential Revision: http://reviews.llvm.org/D3448
llvm-svn: 208310
This addresses an existing FIXME item in the driver. The code model flag was
parsed in the actual tool rather than in the driver. This was problematic since
the value may be invalid. In that case, we would silently treat it as a default
value in non-assert builds, and abort in assert builds. Add a check in the
driver to validate that the value being passed is valid, and if not provide a
proper error message.
llvm-svn: 208275
whether the definition of the template is visible rather than checking whether
the instantiated definition happens to be in an imported module.
llvm-svn: 208150
After this patch clang will ignore -fdwarf2-cfi-asm and -ffno-dwarf2-cfi-asm and
always print assembly that uses cfi directives.
In llvm, MC itself supports cfi since the end of 2010 (support started
in r119972, is reported in the 2.9 release notes).
In binutils the support has been around for much longer. It looks like
support started to be added in May 2003. It is available in 2.15
(31-Aug-2011, 2.14 is from 12-Jun-2003).
llvm-svn: 207602
Summary:
This patch adds a new flag -Rpass=. The flag indicates the name
of the optimization pass that should emit remarks stating when it
made a transformation to the code.
This implements the design I proposed in:
https://docs.google.com/document/d/1FYUatSjZZO-zmFBxjOiuOzAy9mhHA8hqdvklZv68WuQ/edit?usp=sharing
Other changes:
- Add DiagnosticIDs::isRemark(). Use it in printDiagnosticOptions to
print "-R" instead of "-W" in the diagnostic message.
- In BackendConsumer::OptimizationRemarkHandler, get a SourceLocation
object out of the file name, line and column number. Use that location
in the call to Diags.Report().
- When -Rpass is used without debug info a note is emitted alerting
the user that they need to use -gline-tables-only -gcolumn-info to
get this information.
CC: llvm-commits
Differential Revision: http://llvm-reviews.chandlerc.com/D3226
llvm-svn: 206401
Summary:
This allows them to be used without -cc1 the same way as -I and -isystem.
Renamed the options to --system-header-prefix=/--no-system-header-prefix to avoid interference with -isystem and make the intent of the option cleaner.
Reviewers: rsmith
Reviewed By: rsmith
CC: cfe-commits
Differential Revision: http://llvm-reviews.chandlerc.com/D3185
llvm-svn: 204775
This change turns -fsanitize-memory-track-origins into
-fsanitize-memory-track-origins=[level] flag (keeping the old one for
compatibility). Possible levels are 0 (off), 1 (default) and 2 (incredibly
detailed). See docs (part of this patch) for more info.
llvm-svn: 204346
Since "half" is an OpenCL keyword and clang accepts __fp16 as an extension for
other languages, error messages and metadata (and hence debug info) should refer
to the half-precision floating point as "__fp16" instead of "half" when
compiling for non-OpenCL languages. This patch creates a new printing policy for
half in a similar manner to what is done for bool and wchar_t.
Differential Revision: http://llvm-reviews.chandlerc.com/D2952
llvm-svn: 204164
This is because the PCH is tied to the module files, if one of the module files changes or gets removed
the build system should re-build the PCH file.
rdar://16321245
llvm-svn: 203885
When enabled, always validate the system headers when loading a module.
The end result of this is that when these headers change, we will notice
and rebuild the module.
llvm-svn: 203630
The integrated assembler is a feature. This makes the new flags the default
option, and the previous versions aliases. Ideally, at some point the aliases
would be entirely removed.
llvm-svn: 201963
These features are new in VS 2013 and are necessary in order to layout
std::ostream correctly. Currently we have an ABI incompatibility when
self-hosting with the 2013 stdlib in our convertible_fwd_ostream wrapper
in gtest.
This change adds another implicit attribute, MSVtorDispAttr, because
implicit attributes are currently the best way to make sure the
information stays on class templates through instantiation.
Reviewers: majnemer
Differential Revision: http://llvm-reviews.chandlerc.com/D2746
llvm-svn: 201274
the build
When Clang loads the module, it verifies the user source files that the module
was built from. If any file was changed, the module is rebuilt. There are two
problems with this:
1. correctness: we don't verify system files (there are too many of them, and
stat'ing all of them would take a lot of time);
2. performance: the same module file is verified again and again during a
single build.
This change allows the build system to optimize source file verification. The
idea is based on the fact that while the project is being built, the source
files don't change. This allows us to verify the module only once during a
single build session. The build system passes a flag,
-fbuild-session-timestamp=, to inform Clang of the time when the build started.
The build system also requests to enable this feature by passing
-fmodules-validate-once-per-build-session. If these flags are not passed, the
behavior is not changed. When Clang verifies the module the first time, it
writes out a timestamp file. Then, when Clang loads the module the second
time, it finds a timestamp file, so it can compare the verification timestamp
of the module with the time when the build started. If the verification
timestamp is too old, the module is verified again, and the timestamp file is
updated.
llvm-svn: 201224
These flags control the inheritance model initially used by the
translation unit.
Differential Revision: http://llvm-reviews.chandlerc.com/D2741
llvm-svn: 201175
This option has the following effects:
* It adds the sspstrong IR attribute to each function within the CU.
* It defines the macro __SSP_STRONG__ with the value of 2.
Differential Revision: http://llvm-reviews.chandlerc.com/D2717
llvm-svn: 201120
This option will:
- load the given pch file
- verify it is not out of date by stat'ing dependencies, and
- return 0 on success and non-zero on error
llvm-svn: 200884
flag from clang, and disable zero-base shadow support on all platforms
where it is not the default behavior.
- It is completely unused, as far as we know.
- It is ABI-incompatible with non-zero-base shadow, which means all
objects in a process must be built with the same setting. Failing to
do so results in a segmentation fault at runtime.
- It introduces a backward dependency of compiler-rt on user code,
which is uncommon and complicates testing.
This is the Clang part of a larger change.
llvm-svn: 199372
This makes the C++ ABI depend entirely on the target: MS ABI for -win32 triples,
Itanium otherwise. It's no longer possible to do weird combinations.
To be able to run a test with a specific ABI without constraining it to a
specific triple, new substitutions are added to lit: %itanium_abi_triple and
%ms_abi_triple can be used to get the current target triple adjusted to the
desired ABI. For example, if the test suite is running with the i686-pc-win32
target, %itanium_abi_triple will expand to i686-pc-mingw32.
Differential Revision: http://llvm-reviews.chandlerc.com/D2545
llvm-svn: 199250
Full language modes usually get listed before minor language extensions in
LangOpts, so that subsequent sub-modes can predicate on the major modes.
This also lends to a cleanup in CompilerInvocation to better indicate to the
reader that MSVCCompat is a superset of MicrosoftExt.
Cleanup only.
llvm-svn: 199210
There's been long-standing confusion over the role of these two options. This
commit makes the necessary changes to differentiate them clearly, following up
from r198936.
MicrosoftExt (aka. fms-extensions):
Enable largely unobjectionable Microsoft language extensions to ease
portability. This mode, also supported by gcc, is used for building software
like FreeBSD and Linux kernel extensions that share code with Windows drivers.
MSVCCompat (aka. -fms-compatibility, formerly MicrosoftMode):
Turn on a special mode supporting 'heinous' extensions for drop-in
compatibility with the Microsoft Visual C++ product. Standards-compilant C and
C++ code isn't guaranteed to work in this mode. Implies MicrosoftExt.
Note that full -fms-compatibility mode is currently enabled by default on the
Windows target, which may need tuning to serve as a reasonable default.
See cfe-commits for the full discourse, thread 'r198497 - Move MS predefined
type_info out of InitializePredefinedMacros'
No change in behaviour.
llvm-svn: 199209
In addition to being a sensible default, this is a huge improvement
in test coverage for the MS ABI: any bot that targets Win32 will
now run the test suite using the MS ABI by default.
Differential Revision: http://llvm-reviews.chandlerc.com/D2401
llvm-svn: 199131
It controls everything that -flimit-debug-info used to, plus the
vtable type optimization. The old -fno-limit-debug-info option is now an
alias to -fstandalone-debug and vice versa.
Standalone is the default on Darwin until dtrace is updated to work with
non-standalone debug info (rdar://problem/15758808).
Note: I kept the LimitedDebugInfo name in CodeGenOptions::DebugInfoKind
because NoStandaloneDebugInfo sounded even more confusing.
llvm-svn: 198655
Diego Novillo