Following up on the discussion from
http://lists.llvm.org/pipermail/llvm-dev/2017-April/112305.html, undef
values are now placed in the .bss as well as null values. This prevents
undef global values taking up potentially huge amounts of space in the
.data section.
The following two lines now both generate equivalent .bss data:
@vals1 = internal unnamed_addr global [20000000 x i32] zeroinitializer, align 4
@vals2 = internal unnamed_addr global [20000000 x i32] undef, align 4 ; previously unaccounted for
This is primarily motivated by the corresponding issue in the Rust
compiler (https://github.com/rust-lang/rust/issues/41315).
Differential Revision: https://reviews.llvm.org/D41705
Patch by varkor!
llvm-svn: 324424
See D42509 for the original version of this.
Basically, there are two significant changes to behavior here:
- addLiveOuts always adds all pristine registers (even if a block has
no successors).
- addLiveOuts and addLiveOutsNoPristines always add all callee-saved
registers for return blocks (including conditional return blocks).
I cleaned up the functions a bit to make it clear these properties hold.
Differential Revision: https://reviews.llvm.org/D42655
llvm-svn: 324422
In lld this was the only use of Config->Static where it meant anything
else other than "use .a instead of .so".
If a program turns out to not use any dynamic libraries, we should
produce the same result with and without -static.
llvm-svn: 324421
For input `0'e+1` lexer tokenized as numeric constant only `0'e`. Later
NumericLiteralParser skipped 0 and ' as digits and parsed `e+1` as valid
exponent going past the end of the token. Because it didn't mark numeric
literal as having an error, it continued parsing and tried to expandUCNs
with StringRef of length -2.
The fix is not to parse exponent when we reached the end of token.
Discovered by OSS-Fuzz:
https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=4588
rdar://problem/36076719
Reviewers: rsmith, t.p.northover
Reviewed By: rsmith
Subscribers: cfe-commits, jkorous-apple
Differential Revision: https://reviews.llvm.org/D41834
llvm-svn: 324419
VLAs may refer to a previous DIE to express the DW_AT_count of their
type. Clang generates an artificial "vla_expr" variable for this. If
this DIE hasn't been created yet LLVM asserts. This patch fixes this
by sorting the local variables so that dependencies come before they
are needed. It also replaces the linear scan in DWARFFile with a
std::map, which can be faster.
Differential Revision: https://reviews.llvm.org/D42940
llvm-svn: 324412
combineCmov tries to remove compares against BSR/BSF if we can prove the input to the BSR/BSF are never zero.
As far as I can tell most of the time codegenprepare despeculates ctlz/cttz and gives us a cttz_zero_undef/ctlz_zero_undef which don't use a cmov.
So the only way I found to trigger this code is to show codegenprepare an illegal type which it won't despeculate.
I think we should be turning ctlz/cttz into ctlz_zero_undef/cttz_zero_undef for these cases before we ever get to operation legalization where the cmov is created. But wanted to add these tests so we don't regress.
llvm-svn: 324409
In particular this patch switches RTDyldObjectLinkingLayer to use
orc::SymbolResolver and threads the requried changse (ExecutionSession
references and VModuleKeys) through the existing layer APIs.
The purpose of the new resolver interface is to improve query performance and
better support parallelism, both in JIT'd code and within the compiler itself.
The most visibile change is switch of the <Layer>::addModule signatures from:
Expected<Handle> addModule(std::shared_ptr<ModuleType> Mod,
std::shared_ptr<JITSymbolResolver> Resolver)
to:
Expected<Handle> addModule(VModuleKey K, std::shared_ptr<ModuleType> Mod);
Typical usage of addModule will now look like:
auto K = ES.allocateVModuleKey();
Resolvers[K] = createSymbolResolver(...);
Layer.addModule(K, std::move(Mod));
See the BuildingAJIT tutorial code for example usage.
llvm-svn: 324405
Summary:
This change is part of step five in the series of changes to remove alignment argument from
memcpy/memmove/memset in favour of alignment attributes. In particular, this changes the
DeadStoreElimination pass to cease using the old getAlignment() API of MemoryIntrinsic
in favour of getting dest specific alignments through the new API.
Steps:
Step 1) Remove alignment parameter and create alignment parameter attributes for
memcpy/memmove/memset. ( rL322965, rC322964, rL322963 )
Step 2) Expand the IRBuilder API to allow creation of memcpy/memmove with differing
source and dest alignments. ( rL323597 )
Step 3) Update Clang to use the new IRBuilder API. ( rC323617 )
Step 4) Update Polly to use the new IRBuilder API. ( rL323618 )
Step 5) Update LLVM passes that create memcpy/memmove calls to use the new IRBuilder API,
and those that use use MemIntrinsicInst::[get|set]Alignment() to use [get|set]DestAlignment()
and [get|set]SourceAlignment() instead. ( rL323886, rL323891, rL324148, rL324273, rL324278,
rL324384, rL324395 )
Step 6) Remove the single-alignment IRBuilder API for memcpy/memmove, and the
MemIntrinsicInst::[get|set]Alignment() methods.
Reference
http://lists.llvm.org/pipermail/llvm-dev/2015-August/089384.htmlhttp://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20151109/312083.html
llvm-svn: 324402
Summary:
This change is part of step five in the series of changes to remove alignment argument from
memcpy/memmove/memset in favour of alignment attributes. In particular, this changes the
InferAddressSpaces pass to cease using:
1) The old getAlignment() API of MemoryIntrinsic in favour of getting source & dest specific
alignments through the new API.
2) The old IRBuilder CreateMemCpy/CreateMemMove single-alignment APIs in favour of the new
API that allows setting source and destination alignments independently.
Steps:
Step 1) Remove alignment parameter and create alignment parameter attributes for
memcpy/memmove/memset. ( rL322965, rC322964, rL322963 )
Step 2) Expand the IRBuilder API to allow creation of memcpy/memmove with differing
source and dest alignments. ( rL323597 )
Step 3) Update Clang to use the new IRBuilder API. ( rC323617 )
Step 4) Update Polly to use the new IRBuilder API. ( rL323618 )
Step 5) Update LLVM passes that create memcpy/memmove calls to use the new IRBuilder API,
and those that use use MemIntrinsicInst::[get|set]Alignment() to use [get|set]DestAlignment()
and [get|set]SourceAlignment() instead. ( rL323886, rL323891, rL324148, rL324273, rL324278,
rL324384 )
Step 6) Remove the single-alignment IRBuilder API for memcpy/memmove, and the
MemIntrinsicInst::[get|set]Alignment() methods.
Reference
http://lists.llvm.org/pipermail/llvm-dev/2015-August/089384.htmlhttp://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20151109/312083.html
llvm-svn: 324395
The 10.13 SDK always defines utimensat() (with an availability(macosx=10.13) annotation)
and unconditionally defines UTIME_OMIT, so use the compile-time availability macros
on Apple platforms instead.
For people statically linking libc++, it might make sense to also provide an opt-in
option for using __builtin_available() to dynamically check for the OS version,
but for now let's do the smallest thing needed to unbreak the build.
Based on a patch by Eric Fiselier <eric@efcs.ca>: https://reviews.llvm.org/D34249
Fixes PR33469.
llvm-svn: 324385
Summary:
This change is part of step five in the series of changes to remove alignment argument from
memcpy/memmove/memset in favour of alignment attributes. In particular, this changes the
InlineFunction pass to ceause using the old IRBuilder CreateMemCpy single-alignment API
in favour of the new API that allows setting source and destination alignments independently.
Steps:
Step 1) Remove alignment parameter and create alignment parameter attributes for
memcpy/memmove/memset. ( rL322965, rC322964, rL322963 )
Step 2) Expand the IRBuilder API to allow creation of memcpy/memmove with differing
source and dest alignments. ( rL323597 )
Step 3) Update Clang to use the new IRBuilder API. ( rC323617 )
Step 4) Update Polly to use the new IRBuilder API. ( rL323618 )
Step 5) Update LLVM passes that create memcpy/memmove calls to use the new IRBuilder API,
and those that use use MemIntrinsicInst::[get|set]Alignment() to use [get|set]DestAlignment()
and [get|set]SourceAlignment() instead. ( rL323886, rL323891, rL324148, rL324273, rL324278 )
Step 6) Remove the single-alignment IRBuilder API for memcpy/memmove, and the
MemIntrinsicInst::[get|set]Alignment() methods.
Reference
http://lists.llvm.org/pipermail/llvm-dev/2015-August/089384.htmlhttp://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20151109/312083.html
llvm-svn: 324384
It was always using cmpxchg path and in rmw and cmpxchg instructions
are not distinguishable in the BE.
Differential Revision: https://reviews.llvm.org/D42976
llvm-svn: 324383
Now incorrect type argument that looks like T<A><B> doesn't
cause an assert, but just a parsing error.
Bug: 36224
Differential Revision: https://reviews.llvm.org/D42939
llvm-svn: 324380
Add another layer of indirection
This will be used for specific rounding modes
Reviewer: Jeroen Ketema <j.ketema@xs4all.nl>
Signed-off-by: Jan Vesely <jan.vesely@rutgers.edu>
llvm-svn: 324371
Generalize existing constant matching to work with non-uniform constant vectors as well.
Differential Revision: https://reviews.llvm.org/D42818
llvm-svn: 324369
Eli Friedman