SE was being called during the instruction-fusion process (when the result
is unreliable, and thus ignored). No functionality change is intended.
llvm-svn: 167037
This patch adds more support for vector type comparisons using altivec.
It adds correct support for v16i8, v8i16, v4i32, and v4f32 vector
types for comparison operators ==, !=, >, >=, <, and <=.
llvm-svn: 167015
When the switch-to-lookup tables transform landed in SimplifyCFG, it
was pointed out that this could be inappropriate for some targets.
Since there was no way at the time for the pass to know anything about
the target, an awkward reverse-transform was added in CodeGenPrepare
that turned lookup tables back into switches for some targets.
This patch uses the new TargetTransformInfo to determine if a
switch should be transformed, and removes
CodeGenPrepare::ConvertLoadToSwitch.
llvm-svn: 167011
getCastInstrCost had an assert prohibiting scalar to vector casts. Such casts,
however, are allowed. This should make the vectorizer buildbot happier.
llvm-svn: 166998
When the operand is a plain immediate rather than a label, print it
as [pc, #imm] like we do for the Thumb2 wide encoding variant.
rdar://12154503
llvm-svn: 166991
We will make them delay slot forms if there is something that can be
placed in the delay slot during a separate pass. Mips16 extended instructions
cannot be placed in delay slots.
llvm-svn: 166990
is 24 bits not 20 and the decoding needed to correctly handle converting the
J1 and J2 bits to their I1 and I2 values to reconstruct the displacement.
llvm-svn: 166982
%0 = load <8 x i16>* %dest
%1 = shufflevector <8 x i16> %0, <8 x i16> %in,
<8 x i32> < i32 0, i32 1, i32 2, i32 3, i32 13, i32 undef, i32 14, i32 14>
store <8 x i16> %1, <8 x i16>* %dest
We get:
vmovlpd (%eax), %xmm0, %xmm0
instead of:
vmovaps (%eax), %xmm1
vmovsd %xmm1, %xmm0, %xmm0
No extra test-case is added. I just fixed the existing one
(also it uses FileCheck now).
llvm-svn: 166971
ELF ABI.
A varargs parameter consisting of a single-precision floating-point value,
or of a single-element aggregate containing a single-precision floating-point
value, must be passed in the low-order (rightmost) four bytes of the
doubleword stack slot reserved for that parameter. If there are GPR protocol
registers remaining, the parameter must also be mirrored in the low-order
four bytes of the reserved GPR.
Prior to this patch, such parameters were being passed in the high-order
four bytes of the stack slot and the mirrored GPR.
The patch adds a new test case to verify the correct code generation.
llvm-svn: 166968
checks to avoid performing compile-time arithmetic on PPCDoubleDouble.
Now that APFloat supports arithmetic on PPCDoubleDouble, those checks
are no longer needed, and we can treat the type like any other.
llvm-svn: 166958
treating it as if it were an IEEE floating-point type with 106-bit
mantissa.
This makes compile-time arithmetic on "long double" for PowerPC
in clang (in particular parsing of floating point constants)
work, and fixes all "long double" related failures in the test
suite.
llvm-svn: 166951
Partial copies can show up even when CoalescerPair.isPartial() returns
false. For example:
%vreg24:dsub_0<def> = COPY %vreg31:dsub_0; QPR:%vreg24,%vreg31
Such a partial-partial copy is not good enough for the transformation
adjustCopiesBackFrom() needs to do.
llvm-svn: 166944
wrapper returns a vector of integers when passed a vector of pointers) by having
getIntPtrType itself return a vector of integers in this case. Outside of this
wrapper, I didn't find anywhere in the codebase that was relying on the old
behaviour for vectors of pointers, so give this a whirl through the buildbots.
llvm-svn: 166939
We may need to change the way profile counter values are stored, but
saturation is the wrong thing to do. Just remove it for now.
Patch by Alastair Murray!
llvm-svn: 166938
incorrect instruction sequence due to it not being aware that an
inline assembly instruction may reference memory.
This patch fixes the problem by causing the scheduler to always assume that any
inline assembly code instruction could access memory. This is necessary because
the internal representation of the inline instruction does not include
any information about memory accesses.
This should fix PR13504.
llvm-svn: 166929
ELF subtarget.
The existing logic is used as a fallback to avoid any changes to the Darwin
ABI. PPC64 ELF now has two possible data layout strings: one for FreeBSD,
which requires 8-byte alignment, and a default string that requires
16-byte alignment.
I've added a test for PPC64 Linux to verify the 16-byte alignment. If
somebody wants to add a separate test for FreeBSD, that would be great.
Note that there is a companion patch to update the alignment information
in Clang, which I am committing now as well.
llvm-svn: 166928
output of both
llvm-extract foo.ll -func=bar
and
llvm-extract foo.ll -func=bar -delete
so the two new files could not be linked together anymore. With this change
alias are handled almost like functions and global variables. Almost because
with alias we cannot just clear the initializer/body, we have to create a new
declaration and replace the alias with it.
The net result is that now the output of the above commands can be linked
even if foo.ll has aliases.
llvm-svn: 166907
Previously mips16 was sharing the pattern addr which is used for mips32
and mips64. This had a number of problems:
1) Storing and loading byte and halfword quantities for mips16 has particular
problems due to the primarily non mips16 nature of SP. When we must
load/store byte/halfword stack objects in a function, we must create a mips16
alias register for SP. This functionality is tested in stchar.ll.
2) We need to have an FP register under certain conditions (such as
dynamically sized alloca). We use mips16 register S0 for this purpose.
In this case, we also use this register when accessing frame objects so this
issue also affects the complex pattern addr16. This functionality is
tested in alloca16.ll.
The Mips16InstrInfo.td has been updated to use addr16 instead of addr.
The complex pattern C++ function for addr has been copied to addr16 and
updated to reflect the above issues.
llvm-svn: 166897
This turns loops like
for (unsigned i = 0; i != n; ++i)
p[i] = p[i+1];
into memmove, which has a highly optimized implementation in most libcs.
This was really easy with the new DependenceAnalysis :)
llvm-svn: 166875
Requires a lot less code and complexity on loop-idiom's side and the more
precise analysis can catch more cases, like the one I included as a test case.
This also fixes the edge-case miscompilation from PR9481.
Compile time performance seems to be slightly worse, but this is mostly due
to an extra LCSSA run scheduled by the PassManager and should be fixed there.
llvm-svn: 166874
The monolithic interface for instruction costs has been split into
several functions. This is the corresponding change. No functionality
change is intended.
llvm-svn: 166865
This method emits nodes for passing byval arguments in registers and stack.
This has the same functionality as existing functions PassByValArg64 and
WriteByValArg which will be deleted later.
llvm-svn: 166843
This method copies byval arguments passed in registers onto the stack and has
the same functionality as existing functions CopyMips64ByValRegs and
ReadByValArg which will be deleted later.
llvm-svn: 166841
Add getCostXXX calls for different families of opcodes, such as casts, arithmetic, cmp, etc.
Port the LoopVectorizer to the new API.
The LoopVectorizer now finds instructions which will remain uniform after vectorization. It uses this information when calculating the cost of these instructions.
llvm-svn: 166836
Keep the integer_insertelement test case, the new coalescer can handle
this kind of lane insertion without help from pseudo-instructions.
llvm-svn: 166835
This is currently true, but may change when DA grows more aggressive caching.
Without this setting it's impossible to use DA from a LoopPass because DA is a
function pass and cannot be properly scheduled in between LoopPasses. The
LoopManager reacts to this with an infinite loop which made this really annoying
to debug.
llvm-svn: 166788
The LoopSimplify bug is pretty harmless because the loop goes from unanalyzable
to analyzable but the LCSSA bug is very nasty. It only comes into play with a
specific order of the LoopPassManager worklist and can cause actual
miscompilations, when a SCEV refers to a value that has been replaced with PHI
node. SCEVExpander may then insert code into the wrong place, either violating
domination or randomly miscompiling stuff.
Comes with an extensive test case reduced from the test-suite with
bugpoint+SCEVValidator.
llvm-svn: 166787
Enabled with -verify-scev. This could be extended significantly but hopefully
catches the common cases now. Note that it's not enabled by default in any
configuration because the way it tries to distinguish SCEVs is still fragile and
may produce false positives. Also the test-suite isn't clean yet, one example
is that it fails if a pass drops an NSW bit but it's still present in SCEV's
cached. Cleaning up all those cases will take some time.
llvm-svn: 166786
This patch fixes the rldcl/rldicl/rldicr instruction emission. The issue is
the MDForm_1 instruction defines the PowerISA MB field from 'rldicl'
with the name MBE, but RLDCL/RLDICL/RLDICR definition uses as 'MB'.
It end up by generatint the 'rldicl' enconding at
'lib/Target/PowerPC/PPCGenMCCodeEmitter.inc' to use the fourth argument as the
third. The patch changes it by adjusting to use the fourth argument as
intended.
Fixes PR14180.
llvm-svn: 166770
instructions in a block. GetUnderlyingObject is more expensive than it looks as
it can, for instance, call SimplifyInstruction.
This might have some behavioural changes in odd corner cases, but only because
of some strange artefacts of the original implementation. If you were relying
on those, we can fix that by replacing this with a smarter algorithm. Change
passes the existing tests.
llvm-svn: 166754
As discussed on IRC, add VectorTargetTransform::getNumberOfParts
to provide a stable interface to the vector legalization splitting factor.
llvm-svn: 166751
This is needed so that perl's SHA can be compiled (otherwise
BBVectorize takes far too long to find its fixed point).
I'll try to come up with a reduced test case.
llvm-svn: 166738
This is the first of several steps to incorporate information from the new
TargetTransformInfo infrastructure into BBVectorize. Two things are done here:
1. Target information is used to determine if it is profitable to fuse two
instructions. This means that the cost of the vector operation must not
be more expensive than the cost of the two original operations. Pairs that
are not profitable are no longer considered (because current cost information
is incomplete, for intrinsics for example, equal-cost pairs are still
considered).
2. The 'cost savings' computed for the profitability check are also used to
rank the DAGs that represent the potential vectorization plans. Specifically,
for nodes of non-trivial depth, the cost savings is used as the node
weight.
The next step will be to incorporate the shuffle costs into the DAG weighting;
this will give the edges of the DAG weights as well. Once that is done, when
target information is available, we should be able to dispense with the
depth heuristic.
llvm-svn: 166716
Most places can use PrintFatalError as the unwinding mechanism was not
used for anything other than printing the error. The single exception
was CodeGenDAGPatterns.cpp, where intermediate errors during type
resolution were ignored to simplify incremental platform development.
This use is replaced by an error flag in TreePattern and bailout earlier
in various places if it is set.
llvm-svn: 166712
The isValueEqualityComparison() guard at the top of SimplifySwitch()
only applies to some of the possible transformations.
The newer transformations work just fine on large switches, and the
check on predecessor count is nonsensical.
llvm-svn: 166710
and also fixes the R_PPC64_TOC16 and R_PPC64_TOC16_DS relocation offset.
The 'nop' is needed so a restore TOC instruction (ld r2,40(r1)) can be placed
by the linker to correct restore the TOC of previous function.
Current code has two issues: it defines in PPCInstr64Bit.td file a LDinto_toc
and LDtoc_restore as a DSForm_1 with DS_RA=0 where it should be
DS=2 (the 8 bytes displacement of the TOC saving). It also wrongly emits a
MC intruction using an uint32_t value while the PPC::BL8_NOP_ELF
and PPC::BLA8_NOP_ELF are both uint64_t (because of the following 'nop').
This patch corrects the remaining ExecutionEngine using MCJIT:
ExecutionEngine/2002-12-16-ArgTest.ll
ExecutionEngine/2003-05-07-ArgumentTest.ll
ExecutionEngine/2005-12-02-TailCallBug.ll
ExecutionEngine/hello.ll
ExecutionEngine/hello2.ll
ExecutionEngine/test-call.ll
llvm-svn: 166682
structs having size 3, 5, 6, or 7. Such a struct must be passed and received
as right-justified within its register or memory slot. The problem is only
present for structs that are passed in registers.
Previously, as part of a patch handling all structs of size less than 8, I
added logic to rotate the incoming register so that the struct was left-
justified prior to storing the whole register. This was incorrect because
the address of the parameter had already been adjusted earlier to point to
the right-adjusted value in the storage slot. Essentially I had accidentally
accounted for the right-adjustment twice.
In this patch, I removed the incorrect logic and reorganized the code to make
the flow clearer.
The removal of the rotates changes the expected code generation, so test case
structsinregs.ll has been modified to reflect this. I also added a new test
case, jaggedstructs.ll, to demonstrate that structs of these sizes can now
be properly received and passed.
I've built and tested the code on powerpc64-unknown-linux-gnu with no new
regressions. I also ran the GCC compatibility test suite and verified that
earlier problems with these structs are now resolved, with no new regressions.
llvm-svn: 166680
This patch adds initial PPC64 TOC MC object creation using the small mcmodel
(a single 64K TOC) adding the some TOC relocations (R_PPC64_TOC,
R_PPC64_TOC16, and R_PPC64_TOC16DS).
The addition of 'undefinedExplicitRelSym' hook on 'MCELFObjectTargetWriter'
is meant to avoid the creation of an unreferenced ".TOC." symbol (used in
the .odp creation) as well to set the R_PPC64_TOC relocation target as the
temporary ".TOC." symbol. On PPC64 ABI, the R_PPC64_TOC relocation should
not point to any symbol.
llvm-svn: 166677
smaller integer loads and stores.
The high-level motivation is that the frontend sometimes generates
a single whole-alloca integer load or store during ABI lowering of
splittable allocas. We need to be able to break this apart in order to
see the underlying elements and properly promote them to SSA values. The
hope is that this fixes some performance regressions on x86-32 with the
new SROA pass.
Unfortunately, this causes quite a bit of churn in the test cases, and
bloats some IR that comes out. When we see an alloca that consists soley
of bits and bytes being extracted and re-inserted, we now do some
splitting first, before building widened integer "bucket of bits"
representations. These are always well folded by instcombine however, so
this shouldn't actually result in missed opportunities.
If this splitting of all-integer allocas does cause problems (perhaps
due to smaller SSA values going into the RA), we could potentially go to
some extreme measures to only do this integer splitting trick when there
are non-integer component accesses of an alloca, but discovering this is
quite expensive: it adds yet another complete walk of the recursive use
tree of the alloca.
Either way, I will be watching build bots and LNT bots to see what
fallout there is here. If anyone gets x86-32 numbers before & after this
change, I would be very interested.
llvm-svn: 166662
[register].field
The operator returns the value at the location pointed to by register plus the
offset of field within its structure or union. This patch only handles
immediate fields (i.e., [eax].4). The original displacement has to be a
MCConstantExpr as well.
Part of rdar://12470415 and rdar://12470514
llvm-svn: 166632
into a sbc with a positive number, the immediate should be complemented, not
negated. Also added a missing pattern for ARM codegen.
rdar://12559385
llvm-svn: 166613
When the trip count is -1, getSmallConstantTripMultiple could return zero,
and this would cause runtime loop unrolling to assert. Instead of returning
zero, one is now returned (consistent with the existing overflow cases).
Fixes PR14167.
llvm-svn: 166612
see the offsetof operator. Previously, we were matching something like MOVrm
in the front-end and later matching MOVrr in the back-end. This change makes
things more consistent. It also fixes cases where we can't match against a
memory operand as the source (test cases coming).
Part of rdar://12470317
llvm-svn: 166592
- If more than 1 elemennts are defined and target supports the vectorized
conversion, use the vectorized one instead to reduce the strength on
conversion operation.
llvm-svn: 166546
- As there's no 64-bit GPRs in 32-bit mode, a custom conversion from v2u32 to
v2f32 is added to improve the efficiency of the code generated.
llvm-svn: 166545
the difference from "int x" (which should go in registers and
"struct y {int x;}" (which should not).
Clang will be updated in the next patches.
llvm-svn: 166536
called. Provide an (asserting) definition of Operator's private destructor.
Remove destructors from all classes derived from Operator. We don't need them
for safety, because their implicit definitions would be ill-formed (they'd call
Operator's private destructor), and we don't need them to avoid emitting
vtables, because we don't do anything with Operator subclasses which would
trigger vtable instantiation.
The Operator hierarchy is still a complete disaster with regard to undefined
behavior, but this at least allows LLVM to link when using Clang's
-fcatch-undefined-behavior with a new vptr-based type checking mechanism.
llvm-svn: 166530
non-zero value as we don't know the actual value at this point. This is
necessary to get the matching correct in some cases. However, the actual value
set as the base register doesn't matter, since we're just matching not emitting.
llvm-svn: 166523
loads. It's not really profitable and may result in GVN going into an infinite
loop when it hits constructs like this:
%x = gep %some.type %x, ...
Found via an LTO build of LLVM.
llvm-svn: 166490
- Replace v4i8/v8i8 -> v8f32 DAG combine with custom lowering to reduce
DAG combine overhead.
- Extend the support to v4i16/v8i16 as well.
llvm-svn: 166487
for the PowerPC target, and factoring the results. This will ease future
maintenance of both subtargets.
PPCTargetLowering::LowerCall_Darwin_Or_64SVR4() has grown a lot of special-case
code for the different ABIs, making maintenance difficult. This is getting
worse as we repair errors in the 64-bit ELF ABI implementation, while avoiding
changes to the Darwin ABI logic. This patch splits the routine into
LowerCall_Darwin() and LowerCall_64SVR4(), allowing both versions to be
significantly simplified. I've factored out chunks of similar code where it
made sense to do so. I also performed similar factoring on
LowerFormalArguments_Darwin() and LowerFormalArguments_64SVR4().
There are no functional changes in this patch, and therefore no new test
cases have been developed.
Built and tested on powerpc64-unknown-linux-gnu with no new regressions.
llvm-svn: 166480
%V = mul i64 %N, 4
%t = getelementptr i8* bitcast (i32* %arr to i8*), i32 %V
into
%t1 = getelementptr i32* %arr, i32 %N
%t = bitcast i32* %t1 to i8*
incorporating the multiplication into the getelementptr.
This happens all the time in dragonegg, for example for
int foo(int *A, int N) {
return A[N];
}
because gcc turns this into byte pointer arithmetic before it hits the plugin:
D.1590_2 = (long unsigned int) N_1(D);
D.1591_3 = D.1590_2 * 4;
D.1592_5 = A_4(D) + D.1591_3;
D.1589_6 = *D.1592_5;
return D.1589_6;
The D.1592_5 line is a POINTER_PLUS_EXPR, which is turned into a getelementptr
on a bitcast of A_4 to i8*, so this becomes exactly the kind of IR that the
transform fires on.
An analogous transform (with no testcases!) already existed for bitcasts of
arrays, so I rewrote it to share code with this one.
llvm-svn: 166474
The CFG of the machine function needs to know that the targets of the indirect
branch are successors to the indirect branch.
<rdar://problem/12529625>
llvm-svn: 166448
Per the October 12, 2012 Proposal for annotated disassembly output sent out by
Jim Grosbach this set of changes implements this for X86 and arm. The llvm-mc
tool now has a -mdis option to produced the marked up disassembly and a couple
of small example test cases have been added.
rdar://11764962
llvm-svn: 166445
deterministic, replace it with a DenseMap<std::pair<unsigned, unsigned>,
PHINode*> (we already have a map from BasicBlock to unsigned).
<rdar://problem/12541389>
llvm-svn: 166435
Unreachable blocks can have invalid instructions. For example,
jump threading can produce self-referential instructions in
unreachable blocks. Also, we should not be spending time
optimizing unreachable code. Fixes PR14133.
llvm-svn: 166423
Patch by Quentin Colombet <qcolombet@apple.com>
Original description:
"""
The attached patch is the first step to have a better control on Oz related optimizations.
The Oz optimization level focuses on code size, thus I propose to add an attribute called ForceSizeOpt.
"""
llvm-svn: 166422
very small but very important bugfix:
bool shouldExplore(Use *U) {
Value *V = U->get();
if (isa<CallInst>(V) || isa<InvokeInst>(V))
[...]
should have read:
bool shouldExplore(Use *U) {
Value *V = U->getUser();
if (isa<CallInst>(V) || isa<InvokeInst>(V))
Fixes PR14143!
llvm-svn: 166407
This is important for vectors of pointers because only DataLayout,
not the underlying vector type, knows how to calculate the size
of the pointers in the vector. Fixes PR14138.
llvm-svn: 166401
It passes all tests, produces better results than the old code but uses the
wrong pass, LoopDependenceAnalysis, which is old and unmaintained. "Why is it
still in tree?", you might ask. The answer is obviously: "To confuse developers."
Just swapping in the new dependency pass sends the pass manager into an infinte
loop, I'll try to figure out why tomorrow.
llvm-svn: 166399
Requires a lot less code and complexity on loop-idiom's side and the more
precise analysis can catch more cases, like the one I included as a test case.
This also fixes the edge-case miscompilation from PR9481. I'm not entirely
sure that all cases are handled that the old checks handled but LDA will
certainly become smarter in the future.
llvm-svn: 166390
We used a SCEV to detect that A[X] is consecutive. We assumed that X was
the induction variable. But X can be any expression that uses the induction
for example: X = i + 2;
llvm-svn: 166388
This is important for nested-loop reductions such as :
In the innermost loop, the induction variable does not start with zero:
for (i = 0 .. n)
for (j = 0 .. m)
sum += ...
llvm-svn: 166387
If the pointer is consecutive then it is safe to read and write. If the pointer is non-loop-consecutive then
it is unsafe to vectorize it because we may hit an ordering issue.
llvm-svn: 166371
a memory operand. Retain this information and then add the sizing directives
to the IR. This allows the backend to do proper instruction selection.
llvm-svn: 166316
which is supposed to consistently raise SIGTRAP across all systems. In contrast,
__builtin_trap() behave differently on different systems. e.g. it raises SIGTRAP on ARM, and
SIGILL on X86. The purpose of __builtin_debugtrap() is to consistently provide "trap"
functionality, in the mean time preserve the compatibility with on gcc on __builtin_trap().
The X86 backend is already able to handle debugtrap(). This patch is to:
1) make front-end recognize "__builtin_debugtrap()" (emboddied in the one-line change to Clang).
2) In DAG legalization phase, by default, "debugtrap" will be replaced with "trap", which
make the __builtin_debugtrap() "available" to all existing ports without the hassle of
changing their code.
3) If trap-function is specified (via -trap-func=xyz to llc), both __builtin_debugtrap() and
__builtin_trap() will be expanded into the function call of the specified trap function.
This behavior may need change in the future.
The provided testing-case is to make sure 2) and 3) are working for ARM port, and we
already have a testing case for x86.
llvm-svn: 166300
- If INSERT_VECTOR_ELT is supported (above SSE2, either by custom
sequence of legal insn), transform BUILD_VECTOR into SHUFFLE +
INSERT_VECTOR_ELT if most of elements could be built from SHUFFLE with few
(so far 1) elements being inserted.
llvm-svn: 166288
Removed extra stack frame object for fixed byval arguments,
VarArgsStyleRegisters invocation was reworked due to some improper usage in
past. PR14099 also demonstrates it.
llvm-svn: 166273
Hal Finkel