This caused PR34596.
> [MachineCombiner] Update instruction depths incrementally for large BBs.
>
> Summary:
> For large basic blocks with lots of combinable instructions, the
> MachineTraceMetrics computations in MachineCombiner can dominate the compile
> time, as computing the trace information is quadratic in the number of
> instructions in a BB and it's relevant successors/predecessors.
>
> In most cases, knowing the instruction depth should be enough to make
> combination decisions. As we already iterate over all instructions in a basic
> block, the instruction depth can be computed incrementally. This reduces the
> cost of machine-combine drastically in cases where lots of instructions
> are combined. The major drawback is that AFAIK, computing the critical path
> length cannot be done incrementally. Therefore we only compute
> instruction depths incrementally, for basic blocks with more
> instructions than inc_threshold. The -machine-combiner-inc-threshold
> option can be used to set the threshold and allows for easier
> experimenting and checking if using incremental updates for all basic
> blocks has any impact on the performance.
>
> Reviewers: sanjoy, Gerolf, MatzeB, efriedma, fhahn
>
> Reviewed By: fhahn
>
> Subscribers: kiranchandramohan, javed.absar, efriedma, llvm-commits
>
> Differential Revision: https://reviews.llvm.org/D36619
llvm-svn: 313213
MachineScheduler when clustering loads or stores checks if base
pointers point to the same memory. This check is done through
comparison of base registers of two memory instructions. This
works fine when instructions have separate offset operand. If
they require a full calculated pointer such instructions can
never be clustered according to such logic.
Changed shouldClusterMemOps to accept base registers as well and
let it decide what to do about it.
Differential Revision: https://reviews.llvm.org/D37698
llvm-svn: 313208
Since users typically don't really care about the .dwo / non.dwo
distinction, this patch makes it so dwarfdump --debug-<info,...> dumps
.debug_info and (if available) also .debug_info.dwo. This simplifies
the command line interface (I've removed all dwo-specific dump
options) and makes the tool friendlier to use.
Differential Revision: https://reviews.llvm.org/D37771
llvm-svn: 313207
Previously we used a size of '1' for VLAs because we weren't sure what
MSVC did. However, MSVC does support declaring an array without a size,
for which it emits an array type with a size of zero. Clang emits the
same DI metadata for VLAs and arrays without bound, so we would describe
arrays without bound as having one element. This lead to Microsoft
debuggers only printing a single element.
Emitting a size of zero appears to cause these debuggers to search the
symbol information to find a definition of the variable with accurate
array bounds.
Fixes http://crbug.com/763580
llvm-svn: 313203
This returns "cortex-a73" for second-generation Kryo; not precisely
correct, but close enough.
Differential Revision: https://reviews.llvm.org/D37724
llvm-svn: 313200
This is to fix PR34502. After rL311401, the live range of spilled vreg will be
cleared. HoistSpill need to use the live range of the original vreg before splitting
to know the moving range of the spills. The patch saves a copy of live interval for
the spilled vreg inside of HoistSpillHelper.
Differential Revision: https://reviews.llvm.org/D37578
llvm-svn: 313197
Summary: SampleProfileLoader inlines hot functions if it is inlined in the profiled binary. However, the inline needs to be guarded by legality check, otherwise it could lead to correctness issues.
Reviewers: eraman, davidxl
Reviewed By: eraman
Subscribers: sanjoy, llvm-commits
Differential Revision: https://reviews.llvm.org/D37779
llvm-svn: 313195
The code in llvm-nm for Mach-O files to determine the section type for an
N_SECT type symbol it will call getSymbolSection() and check for the error,
but in the case the n_sect value is zero it will return section_end() (aka nullptr).
And the code was using that and crashing instead of just returning a ’s’ for a
section or printing (?,?) as it would if getSymbolSection() returned an error.
rdar://33136604
llvm-svn: 313193
Summary:
To improve CodeView quality for static member functions, we need to make the
static explicit. In addition to a small change in LLVM's CodeViewDebug to
return the appropriate MethodKind, this requires a small change in Clang to
note the staticness in the debug info metadata.
Subscribers: aprantl, hiraditya
Differential Revision: https://reviews.llvm.org/D37715
llvm-svn: 313192
This was intended to be a generic CMake solution to a problem
shared across several projects. It turns out it doesn't interact
very well certain CMake configurations, and furthermore the
"problem" is actually not a problem, as the problematic code
is never executed to begin with. So this really isn't solving
anything.
llvm-svn: 313191
Summary:
Full inline cost is computed when -inline-cost-full is true or ORE is
non-null. This patch adds another way to compute full inline cost by
adding a field to InlineParams. This will be used by SampleProfileLoader
to check legality of inlining a callee that it wants to inline.
Reviewers: danielcdh, haicheng
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D37819
llvm-svn: 313185
These are changes to reduce redundant computations when calculating a
feasible vectorization factor:
1. early return when target has no vector registers
2. don't compute register usage for the default VF.
Suggested during review for D37702.
llvm-svn: 313176
Summary:
Added text options to -pgo-view-counts and -pgo-view-raw-counts that dump block frequency and branch probability info in text.
This is useful when the graph is very large and complex (the dot command crashes, lines/edges too close to tell apart, hard to navigate without textual search) or simply when text is preferred.
Reviewers: davidxl
Reviewed By: davidxl
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D37776
llvm-svn: 313159
Summary: References should only be on the aliasee.
Reviewers: pcc
Subscribers: llvm-commits, inglorion
Differential Revision: https://reviews.llvm.org/D37814
llvm-svn: 313158
We were previously handling aliases during dead stripping by adding
the aliased global's "original name" GUID to the worklist. This will
lead to incorrect behaviour if the global has local linkage because
the original name GUID will not correspond to the global's GUID in
the summary.
Because an alias is just another name for the global that it
references, there is no need to mark the referenced global as used,
or to follow references from any other copies of the global. So all
we need to do is to follow references from the aliasee's summary
instead of the alias.
Differential Revision: https://reviews.llvm.org/D37789
llvm-svn: 313157
Summary:
Change the type of the Redirects parameter of llvm::sys::ExecuteAndWait,
ExecuteNoWait and other APIs that wrap them from `const StringRef **` to
`ArrayRef<Optional<StringRef>>`, which is safer and simplifies the use of these
APIs (no more local StringRef variables just to get a pointer to).
Corresponding clang changes will be posted as a separate patch.
Reviewers: bkramer
Reviewed By: bkramer
Subscribers: vsk, llvm-commits
Differential Revision: https://reviews.llvm.org/D37563
llvm-svn: 313155
The test added in r313151 requires a target triple since it is
running through code generation. Fix bot failures by requiring
an x86 target.
llvm-svn: 313153
Summary:
SamplePGO indirect call profiles record the target as the original GUID
for statics. The importer had special handling to map to the normal GUID
in that case. The dead global analysis needs the same treatment or
inconsistencies arise, resulting in linker unsats due to some dead
symbols being exported and kept, leaving in references to other dead
symbols that are removed.
This can happen when a SamplePGO profile collected by one binary is used
for a different binary, so the indirect call profiles may not accurately
reflect live targets.
Reviewers: danielcdh
Subscribers: mehdi_amini, inglorion, llvm-commits, eraman
Differential Revision: https://reviews.llvm.org/D37783
llvm-svn: 313151
This patch corrects the definition of the DINSM instruction.
Specification for DINSM instruction for Mips64 says that size operand should
be 2 <= size <= 64, but it is defined as uimm5_inssize_plus1 which gives
range of 1 .. 32.
Patch by Aleksandar Beserminji.
Differential Revision: https://reviews.llvm.org/D37683
llvm-svn: 313149
Summary: Detected by LeakSanitizer for Darwin
Reviewers: enderby, rafael
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D37750
llvm-svn: 313146
NFC.
Replacing -mcpu=skx by -mattr in the run command of the codegen test: avx512-gather-scatter-intrin.ll.
Reviewers: delena
Revision: https://reviews.llvm.org/D37799
llvm-svn: 313144
This patches renames "brief" to "verbose" in de DIDumpOptions and
inverts the logic to match the new behavior where brief is the default.
Changing the default value uncovered some bugs related to the
DIDumpOptions not being propagated and have been fixed as well.
Differential revision: https://reviews.llvm.org/D37745
llvm-svn: 313139
NFC.
Updating the code gen regression test bmi2-schedule.ll to use the KNL and SKYLAKE prefixes for the run commands that use the knl and Skylake mcpu options.
The fix is in preparation for a large patch of adding all SKL scheduling information.
Reviewers: delena, zvi, RKSimon
Revision: https://reviews.llvm.org/D37796
llvm-svn: 313138
NFC.
Updating the code gen regression test bmi2-schedule.ll to use the KNL and SKYLAKE prefixes for the run commands that use the knl and Skylake mcpu options.
The fix is in preparation for a large patch of adding all SKL scheduling information.
Reviewers: delena, zvi
Revision: https://reviews.llvm.org/D37796
llvm-svn: 313137
Updating codegen test bmi2-schedule.ll to use the SKYLAKE and KNL prefix as preparatipn for an upcoming patch to add all SKL scheduling information.
llvm-svn: 313136
Reid Kleckner