after finding the (unique) layout predecessor. Sometimes a block may be listed
more than once, and processing it more than once in this loop can lead to
inconsistent values for FtTBB/FtFBB, since the AnalyzeBranch method does not
clear these values. There's no point in continuing the loop regardless.
The testcase for this is reduced from the 2003-05-02-DependentPHI SingleSource
test.
llvm-svn: 71536
and generalize it so that it can be used by IndVarSimplify. Implement the
base IndVarSimplify transformation code using IVUsers. This removes
TestOrigIVForWrap and associated code, as ScalarEvolution now has enough
builtin overflow detection and folding logic to handle all the same cases,
and more. Run "opt -iv-users -analyze -disable-output" on your favorite
loop for an example of what IVUsers does.
This lets IndVarSimplify eliminate IV casts and compute trip counts in
more cases. Also, this happens to finally fix the remaining testcases
in PR1301.
Now that IndVarSimplify is being more aggressive, it occasionally runs
into the problem where ScalarEvolutionExpander's code for avoiding
duplicate expansions makes it difficult to ensure that all expanded
instructions dominate all the instructions that will use them. As a
temporary measure, IndVarSimplify now uses a FixUsesBeforeDefs function
to fix up instructions inserted by SCEVExpander. Fortunately, this code
is contained, and can be easily removed once a more comprehensive
solution is available.
llvm-svn: 71535
These values aren't analyzable, so they don't care if more information
about the loop trip count can be had. Also, SCEVUnknown is used for
a PHI while the PHI itself is being analyzed, so it needs to be left
in the Scalars map. This fixes a variety of subtle issues.
llvm-svn: 71533
type, rather than assume that it does. If the operand is not vector, it
shouldn't be run through ScalarizeVectorOp. This fixes one of the
testcases in PR3886.
llvm-svn: 71453
method, fixing a crash on PR4146. While the store will
ultimately overwrite the "padded size" number of bits in memory,
the stored value may be a subset of this size. This function
only wants to handle the case where all bits are stored.
llvm-svn: 71224
scavenger gets confused about register liveness if it doesn't see them.
I'm not thrilled with this solution, but it only comes up when there are dead
copies in the code, which is something that hopefully doesn't happen much.
Here is what happens in pr4100: As shown in the following excerpt from the
debug output of llc, the source of a move gets reloaded from the stack,
inserting a new load instruction before the move. Since that source operand
is a kill, the physical register is free to be reused for the destination
of the move. The move ends up being a no-op, copying R3 to R3, so it is
deleted. But, it leaves behind the load to reload %reg1028 into R3, and
that load is not updated to show that it's destination operand (R3) is dead.
The scavenger gets confused by that load because it thinks that R3 is live.
Starting RegAlloc of: %reg1025<def,dead> = MOVr %reg1028<kill>, 14, %reg0, %reg0
Regs have values:
Reloading %reg1028 into R3
Last use of R3[%reg1028], removing it from live set
Assigning R3 to %reg1025
Register R3 [%reg1025] is never used, removing it from live set
Alternative solutions might be either marking the load as dead, or zapping
the load along with the no-op copy. I couldn't see an easy way to do
either of those, though.
llvm-svn: 71196
bits captured, but the pointer marked nocapture. In fact
I now recall that this problem is why only readnone functions
returning void were considered before! However keep a small
fix that was also in r70876: a readnone function returning
void can result in bits being captured if it unwinds, so
test for this.
llvm-svn: 71168
checking for bcopy... no
checking for getc_unlocked... Assertion failed: (0 && "Unknown SCEV kind!"), function operator(), file /Volumes/Sandbox/Buildbot/llvm/full-llvm/build/llvmCore.roots/llvmCore~obj/src/lib/Analysis/ScalarEvolution.cpp, line 511.
/Volumes/Sandbox/Buildbot/llvm/full-llvm/build/llvmgcc42.roots/llvmgcc42~obj/src/libdecnumber/decUtility.c:360: internal compiler error: Abort trap
Please submit a full bug report,
with preprocessed source if appropriate.
See <URL:http://developer.apple.com/bugreporter> for instructions.
make[4]: *** [decUtility.o] Error 1
make[4]: *** Waiting for unfinished jobs....
Assertion failed: (0 && "Unknown SCEV kind!"), function operator(), file /Volumes/Sandbox/Buildbot/llvm/full-llvm/build/llvmCore.roots/llvmCore~obj/src/lib/Analysis/ScalarEvolution.cpp, line 511.
/Volumes/Sandbox/Buildbot/llvm/full-llvm/build/llvmgcc42.roots/llvmgcc42~obj/src/libdecnumber/decNumber.c:5591: internal compiler error: Abort trap
Please submit a full bug report,
with preprocessed source if appropriate.
See <URL:http://developer.apple.com/bugreporter> for instructions.
make[4]: *** [decNumber.o] Error 1
make[3]: *** [all-stage2-libdecnumber] Error 2
make[3]: *** Waiting for unfinished jobs....
llvm-svn: 71165
the readnone. Since MallocInst is scheduled for deletion
it doesn't seem worth doing anything more subtle, such as
having mayWriteToMemory return true for MallocInst.
llvm-svn: 71077
allow it to have multiple CFG edges to that block. This is needed
to allow MachineBasicBlock::isOnlyReachableByFallthrough to work
correctly. This fixes PR4126.
llvm-svn: 71018
Running /Volumes/Sandbox/Buildbot/llvm/full-llvm/build/llvm.src/test/
CodeGen/X86/dg.exp ...
FAIL: /Volumes/Sandbox/Buildbot/llvm/full-llvm/build/llvm.src/test/
CodeGen/X86/change-compare-stride-1.ll
Failed with exit(1) at line 2
while running: grep {cmpq $-478,} change-compare-stride-1.ll.tmp
child process exited abnormally
llvm-svn: 71013
#NAME# with the name of the defm instantiating the multiclass. This is
useful for AVX instruction naming where a "V" prefix is standard
throughout the ISA. For example:
multiclass SSE_AVX_Inst<...> {
def SS : Instr<...>;
def SD : Instr<...>;
def PS : Instr<...>;
def PD : Instr<...>;
def V#NAME#SS : Instr<...>;
def V#NAME#SD : Instr<...>;
def V#NAME#PS : Instr<...>;
def V#NAME#PD : Instr<...>;
}
defm ADD : SSE_AVX_Inst<...>;
Results in
ADDSS
ADDSD
ADDPS
ADDPD
VADDSS
VADDSD
VADDPS
VADDPD
llvm-svn: 70979
only capture their arguments by returning them or
throwing an exception or not based on the argument
value. Patch essentially by Frits van Bommel.
llvm-svn: 70876
ThreadEdge directly. This shares the code, but is just a refactoring.
* Make JumpThreading compute the set of loop headers and avoid threading
across them. This prevents jump threading from forming irreducible
loops (goodness) but also prevents it from threading in other cases that
are beneficial (see the comment above FindFunctionBackedges).
llvm-svn: 70820
of returning a list of pointers to Values that are deleted. This was
unsafe, because the pointers in the list are, by nature of what
RecursivelyDeleteDeadInstructions does, always dangling. Replace this
with a simple callback mechanism. This may eventually be removed if
all clients can reasonably be expected to use CallbackVH.
Use this to factor out the dead-phi-cycle-elimination code from LSR
utility function, and generalize it to use the
RecursivelyDeleteTriviallyDeadInstructions utility function.
This makes LSR more aggressive about eliminating dead PHI cycles;
adjust tests to either be less trivial or to simply expect fewer
instructions.
llvm-svn: 70636
artificial "ptrtoint", as it tends to clutter up complicated
expressions. The cast operators now print both source and
destination types, which is usually sufficient.
llvm-svn: 70554
compute an upper-bound value for the trip count, in addition to
the actual trip count. Use this to allow getZeroExtendExpr and
getSignExtendExpr to fold casts in more cases.
This may eventually morph into a more general value-range
analysis capability; there are certainly plenty of places where
more complete value-range information would allow more folding.
llvm-svn: 70509
memory operands otherwise the writebacks get lost when the inline asm
doesn't otherwise have side effects. This fixes rdar://6839427, though
clang really shouldn't generate these anymore.
llvm-svn: 70455
(sext i8 {-128,+,1} to i64) to i64 {-128,+,1}, where the iteration
crosses from negative to positive, but is still safe if the trip
count is within range.
llvm-svn: 70421
anything larger than 64-bits, avoiding a crash. This should
really be fixed to use APInts, though type legalization happens
to help us out and we get good code on the attached testcase at
least.
This fixes rdar://6836460
llvm-svn: 70360
Massive check in. This changes the "-fast" flag to "-O#" in llc. If you want to
use the old behavior, the flag is -O0. This change allows for finer-grained
control over which optimizations are run at different -O levels.
Most of this work was pretty mechanical. The majority of the fixes came from
verifying that a "fast" variable wasn't used anymore. The JIT still uses a
"Fast" flag. I'll change the JIT with a follow-up patch.
llvm-svn: 70343
use the old behavior, the flag is -O0. This change allows for finer-grained
control over which optimizations are run at different -O levels.
Most of this work was pretty mechanical. The majority of the fixes came from
verifying that a "fast" variable wasn't used anymore. The JIT still uses a
"Fast" flag. I'm not 100% sure if it's necessary to change it there...
llvm-svn: 70270
information to simplify [sz]ext({a,+,b}) to {zext(a),+,[zs]ext(b)},
as appropriate.
These functions and the trip count code each call into the other, so
this requires careful handling to avoid infinite recursion. During
the initial trip count computation, conservative SCEVs are used,
which are subsequently discarded once the trip count is actually
known.
Among other benefits, this change lets LSR automatically eliminate
some unnecessary zext-inreg and sext-inreg operation where the
operand is an induction variable.
llvm-svn: 70241
PR2957
ISD::VECTOR_SHUFFLE now stores an array of integers representing the shuffle
mask internal to the node, rather than taking a BUILD_VECTOR of ConstantSDNodes
as the shuffle mask. A value of -1 represents UNDEF.
In addition to eliminating the creation of illegal BUILD_VECTORS just to
represent shuffle masks, we are better about canonicalizing the shuffle mask,
resulting in substantially better code for some classes of shuffles.
llvm-svn: 70225
Path.cpp:59: warning: case label value exceeds maximum value for type
magic[0] is a (signed) char, but some case values are unsigned (e.g. 0xde).
When magic[0] was 0xde, the switch has taken the default branch instead of case
0xde branch.
Apparently this was the behaviour with older versions of gcc too, but not with g++.
Now g++-4.4 behaves as gcc, and ignores unsigned case values out of range signed
range.
llvm-svn: 70038
This particular one is undefined behavior (although this
isn't related to the crash), so it will no longer do it
at compile time, which seems better.
llvm-svn: 69990
ISD::VECTOR_SHUFFLE now stores an array of integers representing the shuffle
mask internal to the node, rather than taking a BUILD_VECTOR of ConstantSDNodes
as the shuffle mask. A value of -1 represents UNDEF.
In addition to eliminating the creation of illegal BUILD_VECTORS just to
represent shuffle masks, we are better about canonicalizing the shuffle mask,
resulting in substantially better code for some classes of shuffles.
A clean up of x86 shuffle code, and some canonicalizing in DAGCombiner is next.
llvm-svn: 69952
with the persistent insertion point, and change IndVars to make
use of it. This fixes a bug where IndVars was holding on to a
stale insertion point and forcing the SCEVExpander to continue to
use it.
This fixes PR4038.
llvm-svn: 69892
instructions in order to avoid inserting new ones. However, if
the cast instruction is the SCEVExpander's InsertPt, this
causes subsequently emitted instructions to be inserted near
the cast, and not at the location of the original insert point.
Fix this by adjusting the insert point in such cases.
This fixes PR4009.
llvm-svn: 69808
This fixes a very subtle bug. vr defined by an implicit_def is allowed overlap with any register since it doesn't actually modify anything. However, if it's used as a two-address use, its live range can be extended and it can be spilled. The spiller must take care not to emit a reload for the vn number that's defined by the implicit_def. This is both a correctness and performance issue.
llvm-svn: 69743
type to truncate to should be the number of bits of the value that are
preserved, not the number that are clobbered with sign-extension.
This fixes regressions in ldecod.
llvm-svn: 69704
%reg1498<def> = MOV32rm %reg1024, 1, %reg0, 12, %reg0, Mem:LD(4,4) [sunkaddr39 + 0]
%reg1506<def> = MOV32rm %reg1024, 1, %reg0, 8, %reg0, Mem:LD(4,4) [sunkaddr42 + 0]
%reg1486<def> = MOV32rr %reg1506
%reg1486<def> = XOR32rr %reg1486, %reg1498, %EFLAGS<imp-def,dead>
%reg1510<def> = MOV32rm %reg1024, 1, %reg0, 4, %reg0, Mem:LD(4,4) [sunkaddr45 + 0]
=>
%reg1498<def> = MOV32rm %reg2036, 1, %reg0, 12, %reg0, Mem:LD(4,4) [sunkaddr39 + 0]
%reg1506<def> = MOV32rm %reg2037, 1, %reg0, 8, %reg0, Mem:LD(4,4) [sunkaddr42 + 0]
%reg1486<def> = MOV32rr %reg1506
%reg1486<def> = XOR32rr %reg1486, %reg1498, %EFLAGS<imp-def,dead>
%reg1510<def> = MOV32rm %reg2038, 1, %reg0, 4, %reg0, Mem:LD(4,4) [sunkaddr45 + 0]
From linearscan's point of view, each of reg2036, 2037, and 2038 are separate registers, each is "killed" after a single use. The reloaded register is available and it's often clobbered right away. e.g. In thise case reg1498 is allocated EAX while reg2036 is allocated RAX. This means we end up with multiple reloads from the same stack slot in the same basic block.
Now linearscan recognize there are other reloads from same SS in the same BB. So it'll "downgrade" RAX (and its aliases) after reg2036 is allocated until the next reload (reg2037) is done. This greatly increase the likihood reloads from SS are reused.
This speeds up sha1 from OpenSSL by 5.8%. It is also an across the board win for SPEC2000 and 2006.
llvm-svn: 69585
type as the vector element type: allow them to be of
a wider integer type than the element type all the way
through the system, and not just as far as LegalizeDAG.
This should be safe because it used to be this way
(the old type legalizer would produce such nodes), so
backends should be able to handle it. In fact only
targets which have legal vector types with an illegal
promoted element type will ever see this (eg: <4 x i16>
on ppc). This fixes a regression with the new type
legalizer (vec_splat.ll). Also, treat SCALAR_TO_VECTOR
the same as BUILD_VECTOR. After all, it is just a
special case of BUILD_VECTOR.
llvm-svn: 69467
for the optimization it's testing to kick in (although
it improves the code, getting rid of all spills).
I don't understand the optimization well enough to
rescue the test, so XFAILing.
llvm-svn: 69409
leaq foo@TLSGD(%rip), %rdi
as part of the instruction sequence. Using a register other than %rdi and then
copying it to %rdi is not valid.
llvm-svn: 69350
register is available and when it's profitable.
e.g.
xorq %r12<kill>, %r13
addq %rax, -184(%rbp)
addq %r13, -184(%rbp)
==>
xorq %r12<kill>, %r13
movq -184(%rbp), %r12
addq %rax, %r12
addq %r13, %r12
movq %r12, -184(%rbp)
Two more instructions, but fewer memory accesses. It can also open up
opportunities for more optimizations.
llvm-svn: 69341
have pointer types, though in contrast to C pointer types, SCEV
addition is never implicitly scaled. This not only eliminates the
need for special code like IndVars' EliminatePointerRecurrence
and LSR's own GEP expansion code, it also does a better job because
it lets the normal optimizations handle pointer expressions just
like integer expressions.
Also, since LLVM IR GEPs can't directly index into multi-dimensional
VLAs, moving the GEP analysis out of client code and into the SCEV
framework makes it easier for clients to handle multi-dimensional
VLAs the same way as other arrays.
Some existing regression tests show improved optimization.
test/CodeGen/ARM/2007-03-13-InstrSched.ll in particular improved to
the point where if-conversion started kicking in; I turned it off
for this test to preserve the intent of the test.
llvm-svn: 69258
sext around sext(shorter IV + constant), using a
longer IV instead, when it can figure out the
add can't overflow. This comes up a lot in
subscripting; mainly affects 64 bit.
llvm-svn: 69123
llvm.dbg.region.end instrinsic. This nested llvm.dbg.func.start/llvm.dbg.region.end pair now enables DW_TAG_inlined_subroutine support in code generator.
llvm-svn: 69118
operator is used by a CopyToReg to export the value to a different
block, don't reuse the CopyToReg's register for the subreg operation
result if the register isn't precisely the right class for the
subreg operation.
Also, rename the h-registers.ll test, now that there are more
than one.
llvm-svn: 69087
Evan Cheng