Before, ELF at least managed a diagnostic but it was a completely untraceable
"undefined symbol" error. MachO had a variety of even worse behaviours: crash,
emit corrupt file, or an equally bad message.
llvm-svn: 265984
This patch adds support for the MachO .alt_entry assembly directive, and uses
it for global aliases with non-zero GEP offsets. The alt_entry flag indicates
that a symbol should be layed out immediately after the preceding symbol.
Conceptually it introduces an alternate entry point for a function or data
structure. E.g.:
safe_foo:
// check preconditions for foo
.alt_entry fast_foo
fast_foo:
// body of foo, can assume preconditions.
The .alt_entry flag is also implicitly set on assembly aliases of the form:
a = b + C
where C is a non-zero constant, since these have the same effect as an
alt_entry symbol: they introduce a label that cannot be moved relative to the
preceding one. Setting the alt_entry flag on aliases of this form fixes
http://llvm.org/PR25381.
llvm-svn: 263521
Until now curly braces could only be used in MS inline assembly to mark block start/end.
All curly braces were removed completely at a very early stage.
This approach caused bugs like:
"m{o}v eax, ebx" turned into "mov eax, ebx" without any error.
In addition, AVX-512 added special operands (e.g., k registers), which are also surrounded by curly braces that mark them as such.
Now, we need to keep the curly braces and identify at a later stage if they are marking block start/end (if so, ignore them), or surrounding special AVX-512 operands (if so, parse them as such).
This patch fixes the bug described above and enables the use of AVX-512 special operands.
This commit is the the llvm part of the patch.
The clang part of the review is: http://reviews.llvm.org/D17766
The llvm part of the review is: http://reviews.llvm.org/D17767
Differential Revision: http://reviews.llvm.org/D17767
llvm-svn: 262843
Summary:
Fixed an issue for mips with an instruction such as 'sdc1 $f1, 272 +8(a0)' which has a space between '272' and '+'. The parser would then parse '272' and '+8' as two arguments instead of a single expression resulting in one too many arguments in the pseudo instruction.
The reason that the test case has been changed is so that the expected
output matches the output of the GNU assembler.
Reviewers: vkalintiris, dsanders
Subscribers: dsanders, llvm-commits
Differential Revision: http://reviews.llvm.org/D13592
llvm-svn: 260521
CodeView, like most other debug formats, represents the live range of a
variable so that debuggers might print them out.
They use a variety of records to represent how a particular variable
might be available (in a register, in a frame pointer, etc.) along with
a set of ranges where this debug information is relevant.
However, the format only allows us to use ranges which are limited to a
maximum of 0xF000 in size. This means that we need to split our debug
information into chunks of 0xF000.
Because the layout of code is not known until *very* late, we must use a
new fragment to record the information we need until we can know
*exactly* what the range is.
llvm-svn: 259868
CodeView requires us to accurately describe the extent of the inlined
code. We did this by grabbing the next debug location in source order
and using *that* to denote where we stopped inlining. However, this is
not sufficient or correct in instances where there is no next debug
location or the next debug location belongs to the start of another
function.
To get this correct, use the end symbol of the function to denote the
last possible place the inlining could have stopped at.
llvm-svn: 259548
This directive emits the binary annotations that describe line and code
deltas in inlined call sites. Single-stepping through inlined frames in
windbg now works.
llvm-svn: 259535
This support is _very_ rudimentary, just enough to get some basic data
into the CodeView debug section.
Left to do is:
- Use the combined opcodes to save space.
- Do something about code offsets.
llvm-svn: 259230
This reverts commit r259117.
The LineInfo constructor is defined in the codeview library and we have
to link against it now. Doing that isn't trivial, so reverting for now.
llvm-svn: 259126
Adds a new family of .cv_* directives to LLVM's variant of GAS syntax:
- .cv_file: Similar to DWARF .file directives
- .cv_loc: Similar to the DWARF .loc directive, but starts with a
function id. CodeView line tables are emitted by function instead of
by compilation unit, so we needed an extra field to communicate this.
Rather than overloading the .loc direction further, we decided it was
better to have our own directive.
- .cv_stringtable: Emits the codeview string table at the current
position. Currently this just contains the filenames as
null-terminated strings.
- .cv_filechecksums: Emits the file checksum table for all files used
with .cv_file so far. There is currently no support for emitting
actual checksums, just filenames.
This moves the line table emission code down into the assembler. This
is in preparation for implementing the inlined call site line table
format. The inline line table format encoding algorithm requires knowing
the absolute code offsets, so it must run after the assembler has laid
out the code.
David Majnemer collaborated on this patch.
llvm-svn: 259117
The .even directive aligns content to an evan-numbered address.
In at&t syntax .even
In Microsoft syntax even (without the dot).
Differential Revision: http://reviews.llvm.org/D15413
llvm-svn: 255462
This adds reportError to MCContext, which can be used as an alternative to
reportFatalError when the assembler wants to try to continue processing the
rest of the file after the error is reported, so that all of the errors ina
file can be reported. It records the fact that an error was encountered, so we
can avoid emitting an object file if any errors occurred.
This patch doesn't add any uses of this function (a later patch will convert
most uses of reportFatalError to use it), but there is a small functional
change: we use the SourceManager to print the error message, even if we have a
null SMLoc. This means that we get a SourceManager-style message, with the file
and line information shown as <unknown>, rather than the "LLVM ERROR" style
used by report_fatal_error.
llvm-svn: 253327
Summary:
Support for R_MIPS_NONE allows us to parse MIPS16's usage of .reloc.
R_MIPS_32 was included to be able to better test the directive.
Targets can add their relocations by overriding MCAsmBackend::getFixupKind().
Subscribers: grosbach, rafael, majnemer, dsanders, llvm-commits
Differential Revision: http://reviews.llvm.org/D13659
llvm-svn: 252888
The existing behavior was correct on Darwin, which is probably the
platform it was written for.
Before this change, we would rewrite "align 8" to ".align 3" and then
fail to make it through the integrated assembler because 3 is not a
power of 2.
Differential Revision: http://reviews.llvm.org/D14120
llvm-svn: 251418
GNU as and Darwin give the various binary operators different
precedence. LLVM's MC supported the Darwin semantics but not the GNU
semantics.
This fixes PR25311.
llvm-svn: 251271
Crashing is bad, m'kay? Fixing a 4 year old bug of my own creation.
Adding the testcase now which I should have added then which would have
long since caught this.
The problem is that printMessage() will display the diagnostic but not
set HadError to true, resulting in the assembler continuing on its way
and trying to create relocations for things that may not allow them or
otherwise get itself into trouble. Using the Error() helper function
here rather than calling printMessage() directly resolves this.
rdar://23133240
llvm-svn: 250557
.align directive refuses alignment 0 -- a comment in the code hints this is
done for GNU as compatibility, but it seems GNU as accepts .align 0
(and silently rounds up alignment to 1).
Differential Revision: http://reviews.llvm.org/D12682
llvm-svn: 247048
Avoid marking some MCSymbols as used in MC/AsmParser.cpp when no uses
exist. This fixes a bug in parseAssignmentExpression() which
inadvertently sets IsUsed, thereby triggering:
"invalid re-assignment of non-absolute variable"
on otherwise valid code. No other functionality change intended.
The original version of this patch touched many calls to MCSymbol
accessors. On rafael's advice, I have stripped this patch down a bit.
As a follow-up, I intend to find the call sites which intentionally set
IsUsed and force them to do so explicitly.
Differential Revision: http://reviews.llvm.org/D12347
llvm-svn: 246457
This reverts commit r245047.
It was failing on the darwin bots. The problem was that when running
./bin/llc -march=msp430
llc gets to
if (TheTriple.getTriple().empty())
TheTriple.setTriple(sys::getDefaultTargetTriple());
Which means that we go with an arch of msp430 but a triple of
x86_64-apple-darwin14.4.0 which fails badly.
That code has to be updated to select a triple based on the value of
march, but that is not a trivial fix.
llvm-svn: 245062
Other than some places that were handling unknown as ELF, this should
have no change. The test updates are because we were detecting
arm-coff or x86_64-win64-coff as ELF targets before.
It is not clear if the enum should live on the Triple. At least now it lives
in a single location and should be easier to move somewhere else.
llvm-svn: 245047
represented by uint64_t, this patch replaces these
usages with the FeatureBitset (std::bitset) type.
Differential Revision: http://reviews.llvm.org/D10542
llvm-svn: 241058
r224810 fixed the handling of macro debug locations in AsmParser. This patch
fixes the logic to actually do what was intended: it uses the first macro of
the macro stack instead of the last one. The updated testcase shows that the
current scheme doesn't work when macro instanciations are nested and multiple
files are used.
Reviewers: compnerd
Differential Revision: http://reviews.llvm.org/D10463
llvm-svn: 240705
Summary:
In an expression such as "(((a+b)+c)+d)", parseParenExpression() would only parse the "a+b)+c", which would result in an error later on in the parser.
This means that we can only parse one level of inner parentheses.
In order to fix this, I added a new function called parseParenExprOfDepth(), which parses a specified number of trailing parenthesis expressions
(except for the outermost parenthesis), and changed MipsAsmParser to use it in parseMemOffset instead of parseParenExpression().
Reviewers: dsanders, rafael
Reviewed By: dsanders, rafael
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D9742
llvm-svn: 240625
According to the documentation, .thumb_set is 'the equivalent of a .set directive'.
We didn't have equivalent behaviour in terms of all the errors we could throw, for
example, when a symbol is redefined.
This change refactors parseAssignment so that it can be used by .set and .thumb_set
and implements tests for .thumb_set for all the errors thrown by that method.
Reviewed by Rafael Espíndola.
llvm-svn: 240318
The patch is generated using this command:
tools/clang/tools/extra/clang-tidy/tool/run-clang-tidy.py -fix \
-checks=-*,llvm-namespace-comment -header-filter='llvm/.*|clang/.*' \
llvm/lib/
Thanks to Eugene Kosov for the original patch!
llvm-svn: 240137
If the type isn't trivially moveable emplace can skip a potentially
expensive move. It also saves a couple of characters.
Call sites were found with the ASTMatcher + some semi-automated cleanup.
memberCallExpr(
argumentCountIs(1), callee(methodDecl(hasName("push_back"))),
on(hasType(recordDecl(has(namedDecl(hasName("emplace_back")))))),
hasArgument(0, bindTemporaryExpr(
hasType(recordDecl(hasNonTrivialDestructor())),
has(constructExpr()))),
unless(isInTemplateInstantiation()))
No functional change intended.
llvm-svn: 238602
Both MCStreamer and MCObjectStreamer were maintaining a current section
variable and they were slightly out of sync. I don't think this was observable,
but was inefficient and error prone.
Changing this requires a few cascading changes:
* SwitchSection has to call ChangeSection earlier for ChangeSection to see
the old section.
* With that change, ChangeSection cannot call EmitLabel, since during
ChangeSection we are still in the old section.
* When the object streamer requires a begin label, just reused the existing
generic support for begin labels instead of calling EmitLabel directly.
llvm-svn: 238357
This starts merging MCSection and MCSectionData.
There are a few issues with the current split between MCSection and
MCSectionData.
* It optimizes the the not as important case. We want the production
of .o files to be really fast, but the split puts the information used
for .o emission in a separate data structure.
* The ELF/COFF/MachO hierarchy is not represented in MCSectionData,
leading to some ad-hoc ways to represent the various flags.
* It makes it harder to remember where each item is.
The attached patch starts merging the two by moving the alignment from
MCSectionData to MCSection.
Most of the patch is actually just dropping 'const', since
MCSectionData is mutable, but MCSection was not.
llvm-svn: 237936
Defaulting to AShr without consulting the target MCAsmInfo isn't OK.
Add a flag to fix that. Keep it off for now: target migrations will
follow in separate commits.
llvm-svn: 235951
Tim Northover