shuffle (insert ?, Scalar, IndexC), V1, Mask --> insert V1, Scalar, IndexC'
The motivating case is at least a couple of steps away: I noticed that
SLPVectorizer does not analyze shuffles as well as sequences of
insert/extract in PR34724:
https://bugs.llvm.org/show_bug.cgi?id=34724
...so SLP may fail to vectorize when source code has shuffles to start
with or instcombine has converted insert/extract to shuffles.
Independent of that, an insertelement is always a simpler op for IR
analysis vs. a shuffle, so we should transform to insert when possible.
I don't think there's any codegen concern here - if a target can't insert
a scalar directly to some fixed element in a vector (x86?), then this
should get expanded to the insert+shuffle that we started with.
Differential Revision: https://reviews.llvm.org/D53507
llvm-svn: 345607
The SchedModel allows the addition of ReadAdvances to express that certain
operands of the instructions are needed at a later point than the others.
RegAlloc may add pseudo operands that are not part of the instruction
descriptor, and therefore cannot have any read advance entries. This meant
that in some cases the desired read advance was nullified by such a pseudo
operand, which still had the original latency.
This patch fixes this by making sure that such pseudo operands get a zero
latency during DAG construction.
Review: Matthias Braun, Ulrich Weigand.
https://reviews.llvm.org/D49671
llvm-svn: 345606
This commit is a combination of two patches:
* "Fix in getScalarizationOverhead()"
If target returns false in TTI.prefersVectorizedAddressing(), it means the
address registers will not need to be extracted. Therefore, there should
be no operands scalarization overhead for a load instruction.
* "Don't pass the instruction pointer from getMemInstScalarizationCost."
Since VF is always > 1, this is a cost query for an instruction in the
vectorized loop and it should not be evaluated within the scalar
context of the instruction.
Review: Ulrich Weigand, Hal Finkel
https://reviews.llvm.org/D52351https://reviews.llvm.org/D52417
llvm-svn: 345603
Narrowing vector binops came up in the demanded bits discussion in D52912.
I don't think we're going to be able to do this transform in IR as a canonicalization
because of the risk of creating unsupported widths for vector ops, but we already have
a DAG TLI hook to allow what I was hoping for: isExtractSubvectorCheap(). This is
currently enabled for x86, ARM, and AArch64 (although only x86 has existing regression
test diffs).
This is artificially limited to not look through bitcasts because there are so many
test diffs already, but that's marked with a TODO and is a small follow-up.
Differential Revision: https://reviews.llvm.org/D53784
llvm-svn: 345602
Sub, SDiv and UDiv are not commutative, so only the RHS operand can fold a
load. This patch adds a check for this.
Review: Ulrich Weigand
https://reviews.llvm.org/D53791
llvm-svn: 345596
This fixes an assertion when constant folding a GEP when the part of the offset
was in i32 (IndexSize, as per DataLayout) and part in the i64 (PointerSize) in
the newly created test case.
Differential Revision: https://reviews.llvm.org/D52609
llvm-svn: 345585
Summary:
The final pattern.
There is no test changes:
* We are looking for the pattern with one-use of it's mask,
* If the mask is one-use, D48768 will unfold it into pattern d.
* Thus, the tests have extra-use on the mask.
* Thus, only the BMI2 BZHI can be tested, and it already worked.
* So there is no BMI1 test coverage, we just assume it works since it uses the same codepath.
Reviewers: craig.topper, RKSimon
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D53575
llvm-svn: 345584
Summary:
Because of the D48768, that pattern is always unfolded into pattern d,
thus we had no test coverage.
Reviewers: RKSimon, craig.topper
Reviewed By: craig.topper
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D53574
llvm-svn: 345583
Similar to FoldCONCAT_VECTORS, this patch adds FoldBUILD_VECTOR to simplify cases that can avoid the creation of the BUILD_VECTOR - if all the operands are UNDEF or if the BUILD_VECTOR simplifies to a copy.
This exposed an assumption in some AMDGPU code that getBuildVector was guaranteed to be a BUILD_VECTOR node that I've tried to handle.
Differential Revision: https://reviews.llvm.org/D53760
llvm-svn: 345578
Summary: Previously if we had a bitcast vector output type that needs promotion and a vector input type that needs widening we would just do a stack store and load to handle the conversion. We can do a little better if we can widen the bitcast to a legal vector type the same size as the widened input type. Then we can do the bitcast between this widened type and the widened input type. Afterwards we can extract_subvector back to the original output and any_extend that. Type legalization will then circle back and handle promotion of the extract_subvector and the any_extend will just be removed. This will avoid going through the stack and allows us to remove a custom version of this legalization from X86.
Reviewers: efriedma, RKSimon
Reviewed By: efriedma
Subscribers: javed.absar, llvm-commits
Differential Revision: https://reviews.llvm.org/D53229
llvm-svn: 345567
Use SelectionDAG::EVTToAPFloatSemantics. Make the LogicVT calculation in LowerFABSorFNEG similar to LowerFCOPYSIGN. Use APInt::getSignedMaxValue instead of ~APInt::getSignMask.
llvm-svn: 345565
Summary:
Attempting to simplify the addPointer interface.
Currently there's code decomposing a MemoryLocation into (Ptr, Size, AAMDNodes) only to recreate the MemoryLocation inside the call.
Reviewers: reames, mkazantsev
Subscribers: sanjoy, jlebar, llvm-commits
Differential Revision: https://reviews.llvm.org/D53836
llvm-svn: 345548
The purpose of this patch is twofold:
- Fold pre-DWARF v5 functionality into v5 to eliminate the need for 2 different
versions of range list handling. We get rid of DWARFDebugRangelist{.cpp,.h}.
- Templatize the handling of range list tables so that location list handling
can take advantage of it as well. Location list and range list tables have the
same basic layout.
A non-NFC version of this patch was previously submitted with r342218, but it caused
errors with some TSan tests. This patch has no functional changes. The difference to
the non-NFC patch is that there are no changes to rangelist dumping in this patch.
Differential Revision: https://reviews.llvm.org/D53545
llvm-svn: 345546
In this diff the elf-specific code is moved into the subfolder ELF
(and factored out from llvm-objcopy.cpp).
Test plan: make check-all
Differential revision: https://reviews.llvm.org/D53790
llvm-svn: 345544
&& has higher priority than ||, so this assert works really oddly. Add
parens to match the programmer's intent.
Change-Id: I3abe1361ee0694462190c5015779db664012f3d4
llvm-svn: 345543
If a function has target features, it may contain instructions that aren't
represented in the default set of instructions. If the outliner pulls out one
of these instructions, and the function doesn't have the right attributes
attached, we'll run into an LLVM error explaining that the target doesn't
support the necessary feature for the instruction.
This makes outlined functions inherit target features from their parents.
It also updates the machine-outliner.ll test to check that we're properly
inheriting target features.
llvm-svn: 345535
- Relex hard coded registers and stack frame sizes
- Some test cleanups
- Change phi-dbg.ll to match on mir output after phi elimination instead
of going through the whole codegen pipeline.
This is in preparation for https://reviews.llvm.org/D52010
I'm committing all the test changes upfront that work before and after
independently.
llvm-svn: 345532
It can be profitable to outline single-block cold regions because they
may be large.
Allow outlining single-block regions if they have over some threshold of
non-debug, non-terminator instructions. I chose 3 as the threshold after
experimenting with several internal frameworks.
In practice, reducing the threshold further did not give much
improvement, whereas increasing it resulted in substantial regressions.
Differential Revision: https://reviews.llvm.org/D53824
llvm-svn: 345524
Rename SIMDThreeSameMult (etc.) to SIMDThreeSameVectorFML (etc.) to follow
usual naming convention, and add some comments in the .td files.
llvm-svn: 345515
The machine verifier was disabled for x86 by default. There are now only
9 tests failing, compared to what previously was between 20 and 30.
This is a good opportunity to file bugs for all the remaining issues,
then explicitly disable the failing tests and enabling the machine
verifier by default.
This allows us to avoid adding new tests that break the verifier.
PR27481
llvm-svn: 345513
Add an intrinsic that takes 2 integers and perform saturation subtraction on
them.
This is a part of implementing fixed point arithmetic in clang where some of
the more complex operations will be implemented as intrinsics.
Differential Revision: https://reviews.llvm.org/D53783
llvm-svn: 345512
- Add support to generate AUTIBSP, PACIBSP, RETAB instructions for return
address signing
- The key used to sign the function is controlled by the function attribute
"sign-return-address-key"
Differential Revision: https://reviews.llvm.org/D51427
llvm-svn: 345511
When using Visual Studio's built-in support for CMake, the CMakeSettings.json contains the build configurations (build dir, generator, toolchain, cmake variables, etc). It is specific to the build machine, therefore should not be versioned.
Differential Revision: https://reviews.llvm.org/D53775
llvm-svn: 345504
This fixes PR39402. The crash was caused when dereferencing nullptr in
DumpObject and printArchiveChild.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D53690
Patch by Xing GUO
llvm-svn: 345503
This test breaks the X86 MachineVerifier. It looks like the MIR part is
completely useless.
The original author suggests that it can be removed.
Differential Revision: https://reviews.llvm.org/D53767
llvm-svn: 345501
Before this change, the lowering of instructions from llvm::MCInst to
mca::Instruction was done as part of the first stage of the pipeline (i.e. the
FetchStage). In particular, FetchStage was responsible for picking the next
instruction from the source sequence, and lower it to an mca::Instruction with
the help of an object of class InstrBuilder.
The dependency on InstrBuilder was problematic for a number of reasons. Class
InstrBuilder only knows how to lower from llvm::MCInst to mca::Instruction.
That means, it is hard to support a different scenario where instructions
in input are not instances of class llvm::MCInst. Even if we managed to
specialize InstrBuilder, and generalize most of its internal logic, the
dependency on InstrBuilder in FetchStage would have caused more troubles (other
than complicating the pipeline logic).
With this patch, the lowering step is done before the pipeline is run. The
pipeline is no longer responsible for lowering from MCInst to mca::Instruction.
As a consequence of this, the FetchStage no longer needs to interact with an
InstrBuilder. The mca::SourceMgr class now simply wraps a reference to a
sequence of mca::Instruction objects.
This simplifies the logic of FetchStage, and increases the usability of it. As
a result, on a debug build, we see a 7-9% speedup; on a release build, the
speedup is around 3-4%.
llvm-svn: 345500
When the floating point constants are whole numbers they have no decimal point so look like integers, but mean something very different in something like an 'and' instruction.
Ideally we would just print a decimal point and a 0, but I couldn't see how to make APFloat::toString do that.
llvm-svn: 345488
Summary: SNB is the only one that has P23 as a single proc res.
Reviewers: gchatelet
Subscribers: tschuett, llvm-commits
Differential Revision: https://reviews.llvm.org/D53766
llvm-svn: 345480
Add vector support to TargetLowering::expandFP_TO_UINT.
This exposes an issue in X86TargetLowering::LowerVSELECT which was assuming that the select mask was the same width as the LHS/RHS ops - as long as the result is a sign splat we can easily sext/trunk this.
llvm-svn: 345473
Adding the baseline tests in a preparatory NFC commit,
so that the actual commit shows the *diff*.
Yes, i'm aware that a few of these codegen-based sched tests
are testing wrong instructions, i will fix that afterwards.
For https://reviews.llvm.org/D52779
llvm-svn: 345462
The intent here was to run check-llvm/check-clang in the instrumented
clang's build directory, not the maybe-not-yet-created uninstrumented
clang's. Oops. :)
llvm-svn: 345461
As K has to dominate I, IIUC I's range metadata must be a subset of
K's. After Eli's recent clarification to the LangRef, loading a value
outside of the range is undefined behavior.
Therefore if I's range contains elements outside of K's range and we would load
one such value, K would cause undefined behavior.
In cases like hoisting/sinking, we still want the most generic range
over all code paths to/from the hoist/sink point. As suggested in the
patches related to D47339, I will refactor the handling of those
scenarios and try to decouple it from this function as follow up, once
we switched to a similar handling of metadata in most of
combineMetadata.
I updated some tests checking mostly the merging of metadata to keep the
metadata of to dominating load. The most interesting one is probably test8 in
test/Transforms/JumpThreading/thread-loads.ll. It contained a comment
about the alias metadata preventing us to eliminate the branch, but it
seem like the actual problem currently is that we merge the ranges of
both loads and cannot eliminate the icmp afterwards. With this patch, we
manage to eliminate the icmp, as the range of the first load excludes 8.
Reviewers: efriedma, nlopes, davide
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D51629
llvm-svn: 345456
Makes no difference to actual shuffle decoding yet, but merges all the existing limits in one place for when proper support is fixed.
........
Its been reported that this is causing out of trunk failures.
llvm-svn: 345451
Add ARM64 unwind codes to MCLayer, as well SEH directives that will be emitted
by the frame lowering patch to follow. We only emit unwind codes into object
object files for now.
Differential Revision: https://reviews.llvm.org/D50166
llvm-svn: 345450
The class definition for Call_nr has the itinerary as a
parameter, but the value is never assigned to the Itinerary
field for the instruction. This means the compiler is unable
to schedule and packetize the instruction correctly because
these instrution will not have any resource descritions.
I don't have a specific test case, but the ps_call_nr.ll
test failed with a proposed patch.
llvm-svn: 345442
Relocatable content may have overlapping ranges until the sections are
finalized. This reduces the amount of verification that is done on an object
file so that invalid errors are not raised.
llvm-svn: 345441
On GreenDragon, CodeGen/X86/cpus-no-x86_64.ll was still timing out even
after breaking up the original test. I further split off the intel and
AMD cpus which hopefully resolves this.
http://green.lab.llvm.org/green/job/clang-stage2-cmake-RgSan/
llvm-svn: 345438
Summary:
Add missing breaks. Several functions used nested switch statements,
where the outer switch branches based on the architecture, and the inner
switch handles architecture-specific types. If the type isn't
architecture-specific, break out to the generic types rather than fall
through.
getElfPtType: For GNU-style output, llvm-readobj prints
"<unknown>: 0xnnnnnnnn" for an unrecognized segment type, unless the
architecture is EM_ARM, EM_MIPS, or EM_MIPS_RS3_LE, in which case it
prints "". This behavior appears accidental, so instead, always print
the "<unknown>: 0xnnnnnnnn" string.
Reviewers: pcc, grimar
Reviewed By: grimar
Subscribers: sdardis, javed.absar, arichardson, kristof.beyls, atanasyan, llvm-commits
Differential Revision: https://reviews.llvm.org/D53730
llvm-svn: 345436
This reverts commit 8d6af840396f2da2e4ed6aab669214ae25443204 and commit
b78d19c287b6e4a9abc9fb0545de9a3106d38d3d which causes slower build times
by initializing the AddressSanitizer on every function run.
The corresponding revisions are https://reviews.llvm.org/D52814 and
https://reviews.llvm.org/D52739.
llvm-svn: 345433
Default property value 'true' preserves current behavior. Value 'false' can be
used to create VFS "root", file system that gives better control over which
files compiler can use during compilation as there are no unpredictable
accesses to real file system.
Non-fallthrough use case changes how we treat multiple VFS overlay
files. Instead of all of them being at the same level just above a real
file system, now they are nested and subsequent overlays can refer to
files in previous overlays.
rdar://problem/39465552
Reviewers: bruno, benlangmuir
Reviewed By: bruno
Subscribers: dexonsmith, cfe-commits, hiraditya
Differential Revision: https://reviews.llvm.org/D50539
llvm-svn: 345431
The motivating case is from PR37549:
https://bugs.llvm.org/show_bug.cgi?id=37549
The analysis improvement allows us to form a vector 'select' out of
bitwise logic (the use of ComputeNumSignBits was added at rL345149).
The smaller test shows another InstCombine improvement - we use
ComputeNumSignBits to add 'nsw' to shift-left. But the negative
test shows an example where we must not add 'nsw' - when the shuffle
mask contains undef elements.
Differential Revision: https://reviews.llvm.org/D53659
llvm-svn: 345429
The DAGTypeLegalizer::getSETCCWidenedResultTy was widening the MaskVT, but the code in convertMask called after getSETCCWidenedResultTy had no idea this widening had occurred. So none of the operands were widened when convertMask created new setccs with the widened VT.
This patch removes the widening and adds some asserts to getNode to validate the types of setccs to prevent issues like this in the future.
Differential Revision: https://reviews.llvm.org/D53743
llvm-svn: 345428
Depending on who you ask, PGO grants a 15%-25% improvement in build
times when using clang. Sadly, hooking everything up properly to
generate a profile and apply it to clang isn't always straightforward.
This script (and the accompanying docs) aim to make this process easier;
ideally, a single invocation of the given script.
In terms of testing, I've got a cronjob on my Debian box that's meant to
run this a few times per week, and I tried manually running it on a puny
Gentoo box I have (four whole Atom cores!). Nothing obviously broke.
¯\_(ツ)_/¯
I don't know if we have a Python style guide, so I just shoved this
through yapf with all the defaults on.
Finally, though the focus is clang at the moment, the hope is that this
is easily applicable to other LLVM-y tools with minimal effort (e.g.
lld, opt, ...). Hence, this lives in llvm/utils and tries to be somewhat
ambiguous about naming.
Differential Revision: https://reviews.llvm.org/D53598
llvm-svn: 345427
Summary:
The main challenge here is that X86InstrInfo::AnalyzeBranch doesn't
understand the way we're using a CALL instruction as a branch, so we
can't list the CallTarget MBB as a successor of the entry block. If we
don't list it as a successor, then the AsmPrinter doesn't print a label
for the MBB.
Fix the issue by inserting our own label at the beginning of the call
target block. We can rely on the AsmPrinter to always emit it, even
though the block appears to be unreachable, but address-taken.
Fixes PR38391.
Reviewers: thegameg, chandlerc, echristo
Subscribers: hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D53653
llvm-svn: 345426
The "dead" markings allow existing target-independent optimizations,
like MachineSink, to trigger more frequently. The CPSR defs would have
eventually been marked dead by LiveVariables, so this only affects
optimizations before regalloc.
The ARMBaseInstrInfo.cpp change is fixing a bug which is only visible
with this change: the transform adds a use to an otherwise dead def
of CPSR. This is covered by existing regression tests.
thumb2-tbh.ll breaks for Thumb1 due to MachineLICM changing the
generated code; I'll fix it in D53452.
Differential Revision: https://reviews.llvm.org/D53453
llvm-svn: 345420
Currently, for this node:
vector int test(int a, int b, int c, int d) {
return (vector int) { a, b, c, d };
}
we get this on Power9:
mtvsrdd 34, 5, 3
mtvsrdd 35, 6, 4
vmrgow 2, 3, 2
and this on Power8:
mtvsrwz 0, 3
mtvsrwz 1, 5
mtvsrwz 2, 4
mtvsrwz 3, 6
xxmrghd 34, 1, 0
xxmrghd 35, 3, 2
vmrgow 2, 3, 2
This can be improved to this on LE Power9:
rldimi 3, 4, 32, 0
rldimi 5, 6, 32, 0
mtvsrdd 34, 5, 3
and this on LE Power8
rldimi 3, 4, 32, 0
rldimi 5, 6, 32, 0
mtvsrd 34, 3
mtvsrd 35, 5
xxpermdi 34, 35, 34, 0
This patch updates the TD pattern to generate the optimized sequence for both
Power8 and Power9 on LE and BE.
Differential Revision: https://reviews.llvm.org/D53494
llvm-svn: 345414
Summary:
The visitICmp analysis function would record compares of pointer types, as size 0. This causes the resulting memcmp() call to have the wrong total size.
Found with "self-build" of clang/LLVM on Windows.
Reviewers: christylee, trentxintong, courbet
Reviewed By: courbet
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D53536
llvm-svn: 345413
Inheriting constructors from std::pair caused clang-3.8 to treat some DenseMap
initializer_list constructor calls as ambiguous, which broke several bots. This
commit explicitly defines DenseMapPair's constructos to work around the issue.
https://reviews.llvm.org/D53726
llvm-svn: 345411
These promotions add additional bitcasts to the SelectionDAG that can pessimize computeKnownBits/computeNumSignBits. It also seems to interfere with broadcast formation.
This patch removes the promotion and adds isel patterns instead.
The increased table size is more than I would like, but hopefully we can find some canonicalizations or other tricks to start pruning out patterns going forward.
Differential Revision: https://reviews.llvm.org/D53268
llvm-svn: 345408
This is a narrow fix for 1 of the problems mentioned in PR27780:
https://bugs.llvm.org/show_bug.cgi?id=27780
I looked at more general solutions, but it's a mess. We canonicalize shuffle masks
based on the number of elements accessed from each operand, and that's not optional.
If you remove that, we'll crash because we fail to match isel patterns. So I'm
waiting until we're sure that we have blendvb with constant condition and then
commuting based on the load potential. Other cases like blend-with-immediate are
already handled elsewhere, so this is probably not a common problem anyway.
I didn't use "MayFoldLoad" because that checks for one-use and in these cases, we've
screwed that up by creating a temporary PSHUFB using these operands that we're counting
on to be killed later. Undoing that didn't look like a simple task because it's
intertwined with determining if we actually use both operands of the shuffle or not.a
Differential Revision: https://reviews.llvm.org/D53737
llvm-svn: 345390
This patch adds support of `llvm.experimental.guard` intrinsics to non-trivial
simple loop unswitching. These intrinsics represent implicit control flow which
has pretty much the same semantics as usual conditional branches. The
algorithm of dealing with them is following:
- Consider guards as unswitching candidates;
- If a guard is considered the best candidate, turn it into a branch;
- Apply normal unswitching algorithm on this branch.
The patch has no compile time effect on code that does not contain any guards.
Differential Revision: https://reviews.llvm.org/D53744
Reviewed By: chandlerc
llvm-svn: 345387
While working on FileCheck producing better diagnostics in D53710, I noticed
that our test case is broken in a few different ways. The test was running, but
results were not checked as prefix CHECK-COMMON wasn't defined (which is what
FileCheck should warn about). Also, the output was different in 2 cases because
of recent changes in ARMCodeGenPrepare.
Differential Revision: https://reviews.llvm.org/D53746
llvm-svn: 345386
ADDLIB is called to add the contents of an archive to another archive.
Previously this was only accessible through the use of an MRI script.
With the use of a new "L" modifier, archive files can treated in the
manner above when using quick append.
llvm-svn: 345383
AMDGPU currently only supports direct calls, but at lower optimisation levels it
fails to lower statically direct calls which appear indirect due to a bitcast.
Add a pass to visit all CallSites and use CallPromotionUtils to "devirtualize"
calls.
Differential Revision: https://reviews.llvm.org/D52741
llvm-svn: 345382
.debug_loclists is the DWARF 5 version of the .debug_loc.
With that patch, it will be emitted when DWARF 5 is used.
Differential revision: https://reviews.llvm.org/D53365
llvm-svn: 345377
We should be able to make all relevant checks before we actually start the non-trivial
unswitching, so that we could guarantee that once we have started the transform,
it will always succeed.
Reviewed By: chandlerc
Differential Revision: https://reviews.llvm.org/D53747
llvm-svn: 345375
Change a \t to spaces
Change some zero-filling memcpy to aggregate initialization
Delete redundant ArchiveName.clear() after declaration
llvm-svn: 345367
For both operands are bool, short, int, long, long long, add the following optimization.
1. 0-x == y --> x+y ==0
2. 0-x != y --> x+y != 0
Review: nemanjai
Differential Revision: https://reviews.llvm.org/D53360
llvm-svn: 345366
For both operands are bool, short, int, long, long long, add the following optimization test case.
1. 0-x == y --> x+y ==0
2. 0-x != y --> x+y != 0
Review: nemanjai
Differential Revision: https://reviews.llvm.org/D53358
llvm-svn: 345365
Currently, the regular expression that matches the lines of assembly for PPC LE
(ELFv2) does not work for the assembly for BE (ELFv1). This patch fixes it.
Differential revision: https://reviews.llvm.org/D53059
llvm-svn: 345363
At present a v2i16 -> v2f64 convert is implemented by extracts to scalar,
scalar converts, and merge back into a vector. Use vector converts instead,
with the int data permuted into the proper position and extended if necessary.
Patch by RolandF.
Differential revision: https://reviews.llvm.org/D53346
llvm-svn: 345361
For both operands are bool, short, int, long, long long, add the following optimization test case.
1. 0-x == y --> x+y ==0
2. 0-x != y --> x+y != 0
Review: nemanjai
Differential Revision: https://reviews.llvm.org/D53358
llvm-svn: 345357
Summary:
This patch makes the dominatortree recalculate when applying updates with the size of the update vector larger than a threshold. Directly applying updates is usually slower than recalculating the whole domtree in this case. This patch fixes an issue which causes JT running slowly on some inputs.
In bug 37929, the dominator tree is trying to apply 19,000+ updates several times, which takes several minutes.
After this patch, the time used by DT.applyUpdates:
| Input | Before (s) | After (s) | Speedup |
| the 2nd Reproducer in 37929 | 297 | 0.15 | 1980x |
| clang-5.0.0.0.bc | 9.7 | 4.3 | 2.26x |
| clang-5.0.0.4.bc | 11.6 | 2.6 | 4.46x |
Reviewers: kuhar, brzycki, trentxintong, davide, dmgreen, grosser
Reviewed By: kuhar, brzycki
Subscribers: kristina, llvm-commits
Differential Revision: https://reviews.llvm.org/D53245
llvm-svn: 345353
SystemZAsmParser can now handle -debug by printing the operands neatly to the
output stream. Before this patch this lead to an llvm_unreachable().
It seems that now '-mllvm -debug' does not cause any crashes anywhere (at
least not on SPEC).
Review: Ulrich Weigand
https://reviews.llvm.org/D53328
llvm-svn: 345349
In order to print the IR slot number for the memory operand, the DAG pointer
must be passed to SDNode::dump().
The isel-debug.ll test updated to also check for the IR Value reference being
printed correctly.
Review: Ulrich Weigand
https://reviews.llvm.org/D53333
llvm-svn: 345347
Summary:
This adds support for LSDA (exception table) generation for wasm EH.
Wasm EH mostly follows the structure of Itanium-style exception tables,
with one exception: a call site table entry in wasm EH corresponds to
not a call site but a landing pad.
In wasm EH, the VM is responsible for stack unwinding. After an
exception occurs and the stack is unwound, the control flow is
transferred to wasm 'catch' instruction by the VM, after which the
personality function is called from the compiler-generated code. (Refer
to WasmEHPrepare pass for more information on this part.)
This patch:
- Changes wasm.landingpad.index intrinsic to take a token argument, to
make this 1:1 match with a catchpad instruction
- Stores landingpad index info and catch type info MachineFunction in
before instruction selection
- Lowers wasm.lsda intrinsic to an MCSymbol pointing to the start of an
exception table
- Adds WasmException class with overridden methods for table generation
- Adds support for LSDA section in Wasm object writer
Reviewers: dschuff, sbc100, rnk
Subscribers: mgorny, jgravelle-google, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D52748
llvm-svn: 345345
Handle the case where getCurrentFunction() returns nullptr by passing -1 to
printIRSlotNumber(). This will result in <badref> being printed instead of an
assertion failure.
Review: Francis Visoiu Mistrih
https://reviews.llvm.org/D53333
llvm-svn: 345342
Add LLVM intrinsics for the ARMv8.2-A FP16FML vector-form instructions. Add a
DAG pattern to define the indexed-form intrinsics in terms of the vector-form
ones, similarly to how the Dot Product intrinsics were implemented.
Based on a patch by Gao Yiling.
Differential Revision: https://reviews.llvm.org/D53632
llvm-svn: 345337
Summary:
Currently InstPrinter ignores if there are mismatches between block/loop
and end markers by skipping the case if ControlFlowStack is empty. I
guess it is better to explicitly error out in this case, because this
signals invalid input.
Reviewers: aardappel
Subscribers: dschuff, sbc100, jgravelle-google, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D53620
llvm-svn: 345333
The SystemZ backend can do arithmetic of memory by loading and then extending
one of the operands. Similarly, a load + truncate can be folded into an
operand.
This patch improves the SystemZ TTI cost function to recognize this.
Review: Ulrich Weigand
https://reviews.llvm.org/D52692
llvm-svn: 345327
This isn't the most object-size efficient encoding, but it's the only
one GDB supports for the pre-standard fission format. I've written fixes
for this twice now... - so perhaps this comment will help me remember
why neither of these have been committed and why I shouldn't try to
write a third fix another year from now...
llvm-svn: 345326
Enable the DAG optimization that converts vector div/rem with constants into
multiply+shifts sequences by expanding them early. This is needed since
ISD::SMUL_LOHI is 'Custom' lowered on SystemZ, and will therefore not be
available to BuildSDIV after legalization.
Better cost values for these instructions based on how they will be
implemented (a constant divisor is cheaper).
Review: Ulrich Weigand
https://reviews.llvm.org/D53196
llvm-svn: 345321
The artificial dependencies are not real dependencies. In some cases, they
form circuits with bigger MII. However, they are used to schedule instructions
better.
Differential Revision: https://reviews.llvm.org/D53450
llvm-svn: 345319
The required-vector-width attribute was only used for backend testing and has never been generated by clang.
I believe clang is now generating min-legal-vector-width for vector uses in user code.
With this I believe passing -mprefer-vector-width=256 to clang should prevent use of zmm registers in the generated assembly unless the user used a 512-bit intrinsic in their source code.
llvm-svn: 345317
FENTRY_CALL is actually not taking any input / output operands. The
machine verifier complains now because the target description says that:
* It needs 1 unknown output
* It needs 1 or more variable inputs
llvm-svn: 345316
Include all of the store's source vector operands when creating the
MachineMemOperand. Previously, we were missing the first operand,
making the store size seem smaller than it really is.
Differential Revision: https://reviews.llvm.org/D52816
llvm-svn: 345315
Replacing BinaryOperator::isFNeg(...) to avoid regressions when we
separate FNeg from the FSub IR instruction.
Differential Revision: https://reviews.llvm.org/D53650
llvm-svn: 345295
As noticed on D52965, the SINT_TO_FP i64 to f32 legalization code has been dead for years - protected by an assert.
Differential Revision: https://reviews.llvm.org/D53703
llvm-svn: 345290
KNL is based on a modified Silvermont core so I don't think these features apply. I think the LEA flag is probably also wrong, but I'm less sure as I barely understand the 3 LEA flags we have currently.
Differential Revision: https://reviews.llvm.org/D53671
llvm-svn: 345285
Summary:
Currently, Legalizer is trying to lower G_LOAD with a vector type
that has more than two elements due to the incorrect LegalityPredicate.
This patch fixes the issue by removing the multiplication by 8
as `MemDesc.Size` already contains the size in bits.
Reviewers: dsanders, aemerson
Reviewed By: dsanders
Subscribers: rovka, javed.absar, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D53679
llvm-svn: 345282
This patch introduces a new base class for Instruction named InstructionBase.
Class InstructionBase is responsible for tracking data dependencies with the
help of ReadState and WriteState objects. Class Instruction now derives from
InstructionBase, and adds extra information related to the `InstrStage` as well
as the `RCUTokenID`.
ReadState and WriteState objects are no longer unique pointers. This avoids
extra heap allocation and pointer checks that weren't really needed. Now, those
objects are simply stored into SmallVectors. We use a SmallVector instead of a
std::vector because we expect most instructions to only have a very small number
of reads and writes. By using a simple SmallVector we also avoid extra heap
allocations most of the time.
In a debug build, this improves the performance of llvm-mca by roughly 10% (I
still have to verify the impact in performance on a release build).
llvm-svn: 345280
If we have a 64-bit EXT where one of the operands is a subvector of a 128-bit
vector then in some cases we can eliminate an extract_subvector by converting
to a 128-bit EXT of the 128-bit vector.
Differential Revision: https://reviews.llvm.org/D53582
llvm-svn: 345275
This mirrors what we already do for AArch64 as the cores are similar.
As discussed in the review, enabling the machine scheduler causes
more variations in performance changes so it is not enabled for now.
This patch improves LNT scores by a geomean of 1.57% at -O3.
Differential Revision: https://reviews.llvm.org/D53562
llvm-svn: 345272
Using a multiclass reduces duplication, and makes it easier to add new patterns
later. This refactoring does add some new patterns, but as far as I can tell
there's no IR that will end up triggering them so this is effectively NFC.
Differential Revision: https://reviews.llvm.org/D53580
llvm-svn: 345271
Currently a vector move of 0 or -1 will use different instructions depending on
the size of the vector. Using a single instruction (the 128-bit one) for both
gives more opportunity for Machine CSE to eliminate instructions.
Differential Revision: https://reviews.llvm.org/D53579
llvm-svn: 345270
Summary:
If the instruction in the eliminateFrameIndex function is a DBG_VALUE
instruction, it requires special processing. The frame register is set
to VRFrame and the offset is based on the object offset.
The code is similar to the code used in
lib/CodeGen/PrologEpilogInserter.cpp.
Reviewers: tra
Subscribers: jholewinski, llvm-commits
Differential Revision: https://reviews.llvm.org/D53657
llvm-svn: 345269
The current state of the llc invocation is:
* Running all the passes from dwarfehprepare to stack coloring
(included)
* It runs it from the LLVM IR included in the file
* It *ADDS* the generated MI from ISel to the MI in the MIR file
* The machine verifier doesn't like it.
Differential Revision: https://reviews.llvm.org/D53698
llvm-svn: 345266
Summary:
This function was performing two hash lookups when a new struct type was requested: first checking if it exists and second to insert it. This patch updates the function to perform a single hash lookup in this case by updating the value in the hash table in-place in case the struct type was not there before.
Similar to r345151.
Reviewers: bkramer
Reviewed By: bkramer
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D53689
llvm-svn: 345264
As suggested on D52965, this patch moves the i64 to f64 UINT_TO_FP expansion code from LegalizeDAG into TargetLowering and makes it available to LegalizeVectorOps as well.
Not only does this help perform X86 lowering as a true vectorization instead of (partially vectorized) scalar conversions, it avoids the HADDPD op from the scalar code which can be slow on most targets.
The AVX512F does have the vcvtusi2sdq scalar operation but we don't unroll to use it as it seems to only help for the v2f64 case - otherwise the unrolling cost will certainly be too high. My feeling is that we should leave it to the vectorizers - and if it generates the vector UINT_TO_FP we should use it.
Differential Revision: https://reviews.llvm.org/D53649
llvm-svn: 345256
As was already mentioned in comments for D53364, DWARF 5
spec says about DW_LLE_startx_length:
"This is a form of bounded location description that has two unsigned ULEB operands.
The first value is an address index (into the .debug_addr section) that indicates the beginning of the address range
over which the location is valid. The second value is the length of the range. ")
Currently, the length is always parsed as U32.
Patch change the behavior to parse DW_LLE_startx_length as ULEB128 for DWARF 5
and keeps it as U32 for DWARF4+(pre-DWARF5) for compatibility.
Differential revision: https://reviews.llvm.org/D53564
llvm-svn: 345254
I noticed while fixing PR39368 that we don't have generic shuffle costs for broadcast style shuffles.
This patch adds SK_BROADCAST handling, but exposes ARM/AARCH64 lack of handling of this type, which I've added a fix for at the same time.
Differential Revision: https://reviews.llvm.org/D53570
llvm-svn: 345253
When SimplifyCFG changes the PHI node into a select instruction, the debug line records becomes ambiguous. It causes the debugger to display unreachable source lines.
Differential Revision: https://reviews.llvm.org/D53287
llvm-svn: 345250
Summary:
The pfm counters are now in the ExegesisTarget rather than the
MCSchedModel (PR39165).
This also compresses the pfm counter tables (PR37068).
Reviewers: RKSimon, gchatelet
Subscribers: mgrang, llvm-commits
Differential Revision: https://reviews.llvm.org/D52932
llvm-svn: 345243
Multiply a is complex operation so just because some bit of the output isn't used doesn't mean that bit of the input isn't used.
We might able to bound it, but it will require some more thought.
llvm-svn: 345241
GNU readelf tool prints hex value of the ELF header flags field and the
flags names. This change adds the same functionality to llvm-readobj.
Now llvm-readobj can print MIPS and RISCV flags.
New GNUStyle::printFlags() method is a copy of ScopedPrinter::printFlags()
routine. Probably we can escape code duplication and / or simplify the
printFlags() method. But it's a task for separate commit.
Differential revision: https://reviews.llvm.org/D52027
llvm-svn: 345238
Summary: Fixes part of the problem reported in bug 39275.
Reviewers: aheejin, dschuff
Subscribers: sbc100, jgravelle-google, sunfish, llvm-commits, alexcrichton
Differential Revision: https://reviews.llvm.org/D53542
llvm-svn: 345230
This makes the offsets larger (since they are further from the base
address) but those are in the .dwo - and allows removing addresses and
relocations from the .o file.
This could be built into the AddressPool more fundamentally, perhaps -
when you ask for an AddressPool entry you could say "or give me some
other entry and an offset I need to use" - though what to do about
situations where the first use of an address in a section is not the
earliest address in that section... is tricky.
At least with range addresses we can be fairly sure we've seen the
earliest address first because we see the start address for the
function.
llvm-svn: 345224
Summary:
Currently when assigning depths 'rethrow' does not take the whole
control flow stack into accounts but only considers EH pad stacks. When
assigning depth immmediates to rethrows, in normal cases it is done
correctly but when a rethrow instruction throws up to a caller, i.e., we
convert a pseudo RETHROW_TO_CALLER instruction to a rethrow, it
mistakenly compute the whole stack depth.
Reviewers: dschuff
Subscribers: sbc100, jgravelle-google, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D53619
llvm-svn: 345223
Summary:
Changing the node type in lowering was violating assumptions made in
the DAG combiner, so don't change the node type any more. This fixes
one of the issues reported in bug 39275.
Reviewers: aheejin, dschuff
Subscribers: sbc100, jgravelle-google, sunfish, llvm-commits, alexcrichton
Differential Revision: https://reviews.llvm.org/D53537
llvm-svn: 345221
Instead of using the MOVGOT64r pseudo, use the existing
MO_PIC_BASE_OFFSET support on symbol operands. Now I don't have to
create a "scratch register operand" for the pseudo to use, and the
register allocator can make better decisions.
Fixes some X86 verifier errors tracked in PR27481.
llvm-svn: 345219
Summary:
Changes all uses of minnan/maxnan to minimum/maximum
globally. These names emphasize that the semantic difference between
these operations is more than just NaN-propagation.
Reviewers: arsenm, aheejin, dschuff, javed.absar
Subscribers: jholewinski, sdardis, wdng, sbc100, jgravelle-google, jrtc27, atanasyan, llvm-commits
Differential Revision: https://reviews.llvm.org/D53112
llvm-svn: 345218
In this diff we introduce dispatch mechanism based on
the type of the input (archive, object file, raw binary)
and the format (coff, elf, macho).
We also move the ELF-specific code into the namespace llvm::objcopy::elf.
Test plan: make check-all
Differential revision: https://reviews.llvm.org/D53311
llvm-svn: 345217
'ignore-non-existent-contents' stopped working after r342232 in a way
that the actual attribute value isn't used and it works as if it is
always `true`.
Common use case for VFS iteration is iterating through files in umbrella
directories for modules. Ability to detect if some VFS entries point to
non-existing files is nice but non-critical. Instead of adding back
support for `'ignore-non-existent-contents': false` I am removing the
attribute, because such scenario isn't used widely enough and stricter
checks don't provide enough value to justify the maintenance.
Change is done both in LLVM and Clang, corresponding Clang commit is r345212.
rdar://problem/45176119
Reviewers: bruno
Reviewed By: bruno
Subscribers: hiraditya, dexonsmith, sammccall, cfe-commits
Differential Revision: https://reviews.llvm.org/D53228
llvm-svn: 345213
The current splitting algorithm works in three stages:
1) Identify cold blocks, then
2) Use forward/backward propagation to mark hot blocks, then
3) Grow a SESE region of blocks *outside* of the set of hot blocks and
start outlining.
While testing this pass on Apple internal frameworks I noticed that some
kinds of control flow (e.g. loops) are never outlined, even though they
unconditionally lead to / follow cold blocks. I noticed two other issues
related to how cold regions are identified:
- An inconsistency can arise in the internal state of the hotness
propagation stage, as a block may end up in both the ColdBlocks set
and the HotBlocks set. Further inconsistencies can arise as these sets
do not match what's in ProfileSummaryInfo.
- It isn't necessary to limit outlining to single-exit regions.
This patch teaches the splitting algorithm to identify maximal cold
regions and outline them. A maximal cold region is defined as the set of
blocks post-dominated by a cold sink block, or dominated by that sink
block. This approach can successfully outline loops in the cold path. As
a side benefit, it maintains less internal state than the current
approach.
Due to a limitation in CodeExtractor, blocks within the maximal cold
region which aren't dominated by a single entry point (a so-called "max
ancestor") are filtered out.
Results:
- X86 (LNT + -Os + externals): 134KB of TEXT were outlined compared to
47KB pre-patch, or a ~3x improvement. Did not see a performance impact
across two runs.
- AArch64 (LNT + -Os + externals + Apple-internal benchmarks): 149KB
of TEXT were outlined. Ditto re: performance impact.
- Outlining results improve marginally in the internal frameworks I
tested.
Follow-ups:
- Outline more than once per function, outline large single basic
blocks, & try to remove unconditional branches in outlined functions.
Differential Revision: https://reviews.llvm.org/D53627
llvm-svn: 345209
(Relands r344930, reverted in r344935, and now hopefully fixed for
Windows.)
While this change specifically targets FileCheck, it affects any tool
using the same SourceMgr facilities.
Previously, -color was documented in FileCheck's -help output, but
-color had no effect. Now, -color obeys its documentation: it forces
colors to be used in FileCheck diagnostics even when stderr is not a
terminal.
-color is especially helpful when combined with FileCheck's -v, which
can produce a long series of diagnostics that you might wish to pipe
to a pager, such as less -R. The WithColor extensions here will also
help to clean up color usage in FileCheck's annotated dump of input,
which is proposed in D52999.
Reviewed By: JDevlieghere, zturner
Differential Revision: https://reviews.llvm.org/D53419
llvm-svn: 345202
Until now, we've only checked whether merging stores would cause a cycle via
the value argument, but the address and indexed offset arguments are also
capable of creating cycles in some situations.
The addresses are all base+offset with notionally the same base, but the base
SDNode may still be different (e.g. via an indexed load in one case, and an
ISD::ADD elsewhere). This allows cycles to creep in if one of these sources
depends on another.
The indexed offset is usually undef (representing a non-indexed store), but on
some architectures (e.g. 32-bit ARM-mode ARM) it can be an arbitrary value,
again allowing dependency cycles to creep in.
llvm-svn: 345200
It's possible to do a tail call to a stack argument. LLVM already
calculates the right stack offset to call through.
Fixes the sibcall* and musttail* verifier failures tracked at PR27481.
llvm-svn: 345197
Summary:
This renames the IsParsingMSInlineAsm member variable of AsmLexer to
LexMasmIntegers and moves it up to MCAsmLexer. This is the only behavior
controlled by that variable. I added a public setter, so that it can be
set from outside or from the llvm-mc command line. We may need to
arrange things so that users can get this behavior from clang, but
that's future work.
I also put additional hex literal lexing functionality under this flag
to fix PR32973. It appears that this hex literal parsing wasn't intended
to be enabled in non-masm-style blocks.
Now, masm integers (0b1101 and 0ABCh) work in __asm blocks from clang,
but 0b label references work when using .intel_syntax in standalone .s
files.
However, 0b label references will *not* work from __asm blocks in clang.
They will work from GCC inline asm blocks, which it sounds like is
important for Crypto++ as mentioned in PR36144.
Essentially, we only lex masm literals for inline asm blobs that use
intel syntax. If the .intel_syntax directive is used inside a gnu-style
inline asm statement, masm literals will not be lexed, which is
compatible with gas and llvm-mc standalone .s assembly.
This fixes PR36144 and PR32973.
Reviewers: Gerolf, avt77
Subscribers: eraman, hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D53535
llvm-svn: 345189
I'm not sure all the microarchitectural tuning flags that have been added to IVBFeatures are relevant for KNL. Separating will allow us to see and audit them. There might even be some simplification opportunities in the Sandy Bridge through Icelake inheritance line without KNL using the same chain.
llvm-svn: 345183
Add X86 SimplifyDemandedBitsForTargetNode and use it to simplify PMULDQ/PMULUDQ target nodes.
This enables us to repeatedly simplify the node's arguments after the previous approach had to be reverted due to PR39398.
Differential Revision: https://reviews.llvm.org/D53643
llvm-svn: 345182
Summary:
The current default of appending "_"+entry block label to the new
extracted cold function breaks demangling. Change the deliminator from
"_" to "." to enable demangling. Because the header block label will
be empty for release compile code, use "extracted" after the "." when
the label is empty.
Additionally, add a mechanism for the client to pass in an alternate
suffix applied after the ".", and have the hot cold split pass use
"cold."+Count, where the Count is currently 1 but can be used to
uniquely number multiple cold functions split out from the same function
with D53588.
Reviewers: sebpop, hiraditya
Subscribers: llvm-commits, erik.pilkington
Differential Revision: https://reviews.llvm.org/D53534
llvm-svn: 345178
The BKPT instruction is specified to cause a software breakpoint,
and at least on Linux results in a SIGTRAP. This makes it more
suitable for implementing debugtrap than TRAP (aka UDF #254), which
is specified to cause an undefined instruction exception and results
in a SIGILL on Linux.
Moreover, BKPT is not marked as a terminator, which is not only
consistent with the IR instruction but allows the analyzeBlock
function to correctly analyze a basic block containing the instruction,
which fixes an assertion failure in the machine block placement pass
previously triggered by the included test case.
Because BKPT is only supported starting with ARMv5T, we continue to
use UDF #254 when targeting v4T.
Differential Revision: https://reviews.llvm.org/D53614
llvm-svn: 345171
This will allow other generators of LLVM IR to use the auto-vectorizer
without having to change that flag.
Note: on its own, this patch will enable auto-vectorization on Hexagon
in all cases, regardless of the -fvectorize flag. There is a companion
clang patch that together with this one forms an NFC for clang users.
llvm-svn: 345169
This patch brings back the MOV64r0 pseudo instruction for zeroing a 64-bit register. This replaces the SUBREG_TO_REG MOV32r0 sequence we use today. Post register allocation we will rewrite the MOV64r0 to a 32-bit xor with an implicit def of the 64-bit register similar to what we do for the various XMM/YMM/ZMM zeroing pseudos.
My main motivation is to enable the spill optimization in foldMemoryOperandImpl. As we were seeing some code that repeatedly did "xor eax, eax; store eax;" to spill several registers with a new xor for each store. With this optimization enabled we get a store of a 0 immediate instead of an xor. Though I admit the ideal solution would be one xor where there are multiple spills. I don't believe we have a test case that shows this optimization in here. I'll see if I can try to reduce one from the code were looking at.
There's definitely some other machine CSE(and maybe other passes) behavior changes exposed by this patch. So it seems like there might be some other deficiencies in SUBREG_TO_REG handling.
Differential Revision: https://reviews.llvm.org/D52757
llvm-svn: 345165
Non-uniform division/remainder handling was added back at D49248/D50765 - so share the 'mul+sub' costs that already exist for uniform cases.
llvm-svn: 345164
A lifetime end intrinsic between a tail call and the return should not
prevent the call from being tail call optimized.
Differential Revision: https://reviews.llvm.org/D53519
llvm-svn: 345163
Also, removed the initialization of vectors used for processor resource masks.
Support function 'computeProcResourceMasks()' already calls method resize on
those vectors.
No functional change intended.
llvm-svn: 345161
Summary: This function was performing two hash lookups when a new function type was requested: first checking if it exists and second to insert it. This patch updates the function to perform a single hash lookup in this case by updating the value in the hash table in-place in case the function type was not there before.
Reviewers: bkramer
Reviewed By: bkramer
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D53471
llvm-svn: 345151
The original patch was committed here:
rL344609
...and reverted:
rL344612
...because it did not properly check/test data types before calling
ComputeNumSignBits().
The tests that caused bot failures for the previous commit are
over-reaching front-end tests that run the entire -O optimizer
pipeline:
Clang :: CodeGen/builtins-systemz-zvector.c
Clang :: CodeGen/builtins-systemz-zvector2.c
I've added a negative test here to ensure coverage for that case.
The new early exit check also tests the type of the 'B' parameter,
so we don't waste time on matching if either value is unsuitable.
Original commit message:
This is part of solving PR37549:
https://bugs.llvm.org/show_bug.cgi?id=37549
The patterns shown here are a special case of something
that we already convert to select. Using ComputeNumSignBits()
catches that case (but not the more complicated motivating
patterns yet).
The backend has hooks/logic to convert back to logic ops
if that's better for the target.
llvm-svn: 345149
Added begin()/end() methods to allow the usage of SourceMgr in foreach loops.
With this change, method getMCInstFromIndex() (as well as a couple of other
methods) are now redundant, and can be removed from the public interface.
llvm-svn: 345147
This work is to avoid regressions when we seperate FNeg from the FSub IR instruction.
Differential Revision: https://reviews.llvm.org/D53205
llvm-svn: 345146
Summary:
If the target does not support `.asciz` and `.ascii` directives, the
strings are represented as bytes and each byte is placed on the new line
as a separate byte directive `.b8 <data>`. NVPTX target allows to
represent the vector of the data of the same type as a vector, where
values are separated using `,` symbol: `.b8 <data1>,<data2>,...`. This
allows to reduce the size of the final PTX file. Ptxas tool includes ptx
files into the resulting binary object, so reducing the size of the PTX
file is important.
Reviewers: tra, jlebar, echristo
Subscribers: jholewinski, llvm-commits
Differential Revision: https://reviews.llvm.org/D45822
llvm-svn: 345142
On Windows at least, llvm-strings was crashing if it encountered bytes
that mapped to negative chars, as it was passing these into
std::isgraph and std::isblank functions, resulting in undefined
behaviour. On debug builds using MSVC, these functions verfiy that the
value passed in is representable as an unsigned char. Since the char is
promoted to an int, a value greater than 127 would turn into a negative
integer value, and fail the check. Using the llvm::isPrint function is
sufficient to solve the issue.
Reviewed by: ruiu, mstorsjo
Differential Revision: https://reviews.llvm.org/D53509
llvm-svn: 345137
Sanjay Patel