Summary:
There are 2 changes here:
1. Use system sed instead of the sed found in the user's path. This
fixes this script in the case the user has gnu-sed in their $PATH before
bsd sed since `-i ''` isn't compatible and you need `-i` instead.
2. `set -e` in this script so it fails as soon as one of these commands
fail instead of throwing errors for each file if they fail
Since this is only ran on macOS, and we're already using this
absolute path below, this seems like a safe addition
Reviewers: kastiglione, beanz
Reviewed By: kastiglione
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D49776
llvm-svn: 346099
Summary:
A fairly simple operation as setting a breakpoint (writing a breakpoint
opcode) at a given address was going through three classes:
NativeProcessProtocol which called NativeBreakpointList, which then
called SoftwareBrekpoint, only to end up again in NativeProcessProtocol
to do the actual writing itself. This is unnecessarily complex and can
be simplified by moving all of the logic into NativeProcessProtocol
class itself, removing a lot of boilerplate.
One of the reeasons for this complexity was that (it seems)
NativeBreakpointList class was meant to hold both software and hardware
breakpoints. However, that never materialized, and hardware breakpoints
are stored in a separate map holding only hardware breakpoints.
Essentially, this patch makes software breakpoints follow that approach
by replacing the heavy SoftwareBraekpoint with a light struct of the
same name, which holds only the data necessary to describe one
breakpoint. The rest of the logic is in the main class. As, at the
lldb-server level, handling software and hardware breakpoints is very
different, this seems like a reasonable state of things.
Reviewers: krytarowski, zturner, clayborg
Subscribers: mgorny, lldb-commits
Differential Revision: https://reviews.llvm.org/D52941
llvm-svn: 346093
dotest.py started reporting:
Exception: Found multiple tests with the name TestSampleTest.py
After the commit of:
https://reviews.llvm.org/D54056
llvm-svn: 346089
For the lldb unit test suite, we forgot to add the mapping from
site config to main config, so when it found the main config in
the source tree, it wasn't going and loading the configured version
in the build tree first, so the required properties weren't getting
set up properly.
llvm-svn: 346057
This patch modifies how we open File instances in LLDB. Rather than
passing a path or FileSpec to the constructor, we now go through the
virtual file system. This is needed in order to make things work with
the VFS in the future.
Differential revision: https://reviews.llvm.org/D54020
llvm-svn: 346049
I'm not sure why this has to be CMAKE_CURRENT_SOURCE_DIR, but
it causes all kinds of strange cmake generation errors when it's
the binary dir.
llvm-svn: 346035
A year or so ago, I re-wrote most of the lit infrastructure in LLVM so
that it wasn't so boilerplate-y. I added lots of common helper type
stuff, simplifed usage patterns, and made the code more elegant and
maintainable.
We migrated to this in LLVM, clang, and lld's lit files, but not in
LLDBs. This started to bite me recently, as the 4 most recent times I
tried to run the lit test suite in LLDB on a fresh checkout the first
thing that would happen is that python would just start crashing with
unhelpful backtraces and I would have to spend time investigating.
You can reproduce this today by doing a fresh cmake generation, doing
ninja lldb and then python bin/llvm-lit.py -sv ~/lldb/lit/SymbolFile at
which point you'll get a segfault that tells you nothing about what your
problem is.
I started trying to fix the issues with bandaids, but it became clear
that the proper solution was to just bring in the work I did in the rest
of the projects. The side benefit of this is that the lit configuration
files become much cleaner and more understandable as a result.
Differential Revision: https://reviews.llvm.org/D54009
llvm-svn: 346008
Summary:
This patch fixes the NativePDB tests to make them work from x86 command line too
Reviewers: zturner, stella.stamenova
Subscribers: aleksandr.urakov, teemperor, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D54031
llvm-svn: 345974
This adds support for DW_RLE_base_addressx, DW_RLE_startx_endx,
DW_RLE_startx_length, DW_FORM_rnglistx.
Differential revision: https://reviews.llvm.org/D53929
llvm-svn: 345958
Summary:
This patch adds possibility of searching a public symbol with name and type in a
symbol file. It is helpful when working with PE, because PE's symtabs contain
only imported / exported symbols only. Such a search is required for e.g.
evaluation of an expression that calls some function of the debuggee.
Reviewers: zturner, asmith, labath, clayborg, espindola
Reviewed By: clayborg
Subscribers: emaste, arichardson, aleksandr.urakov, jingham, lldb-commits, stella.stamenova
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D53368
llvm-svn: 345957
This patch removes the static accessor in File to get a file's
permissions. Permissions should be checked through the FileSystem class.
llvm-svn: 345901
This patch removes the logic for resolving paths out of FileSpec and
updates call sites to rely on the FileSystem class instead.
Differential revision: https://reviews.llvm.org/D53915
llvm-svn: 345890
This patch should not introduce any behavior changes. It consists of
mostly one of two changes:
1. Replacing fall through comments with the LLVM_FALLTHROUGH macro
2. Inserting 'break' before falling through into a case block consisting
of only 'break'.
We were already using this warning with GCC, but its warning behaves
slightly differently. In this patch, the following differences are
relevant:
1. GCC recognizes comments that say "fall through" as annotations, clang
doesn't
2. GCC doesn't warn on "case N: foo(); default: break;", clang does
3. GCC doesn't warn when the case contains a switch, but falls through
the outer case.
I will enable the warning separately in a follow-up patch so that it can
be cleanly reverted if necessary.
Reviewers: alexfh, rsmith, lattner, rtrieu, EricWF, bollu
Differential Revision: https://reviews.llvm.org/D53950
llvm-svn: 345882
There were some calls left to Exists() on non-darwin platforms (Windows,
Linux and FreeBSD) that weren't yet updated to use the FileSystem.
llvm-svn: 345857
This patch removes the Exists method from FileSpec and updates its uses
with calls to the FileSystem.
Differential revision: https://reviews.llvm.org/D53845
llvm-svn: 345854
This patch removes the ResolveExecutableLocation method from FileSpec
and updates its uses with calls to the FileSystem.
Differential revision: https://reviews.llvm.org/D53834
llvm-svn: 345853
Speculative fix for the Xcode bots where we were seeing the assertion
being triggered because we would re-initialize the FileSystem without
terminating it.
llvm-svn: 345849
This adds basic support for getting function signature types
into LLDB's type system, including into clang's AST. There are
a few edge cases which are not correctly handled, mostly dealing
with nested classes, but this isn't specific to functions and
apply equally to variable types. Note that no attempt has been
made yet to deal with member function types, which will happen
in subsequent patches.
Differential Revision: https://reviews.llvm.org/D53951
llvm-svn: 345848
This patch removes the GetPermissions and GetReadable methods from
FileSpec and updates its uses with calls to the FileSystem.
Differential revision: https://reviews.llvm.org/D53831
llvm-svn: 345843
Summary:
This patch adds a basic implementation of `DoAllocateMemory` and
`DoDeallocateMemory` for Windows processes. For now it considers only the
executable permission (and always allows reads and writes).
Reviewers: zturner, asmith, stella.stamenova, labath, clayborg
Reviewed By: zturner
Subscribers: Hui, vsk, jingham, aleksandr.urakov, clayborg, abidh, teemperor, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D52618
llvm-svn: 345815
This patch removes the GetByteSize method from FileSpec and updates its
uses with calls to the FileSystem.
Differential revision: https://reviews.llvm.org/D53788
llvm-svn: 345812
This patch moves the EnumerateDirectory functionality and related enum
and typedef from FileSpec to FileSystem.
This is part of a set of patches that extracts file system related
convenience methods from FileSpec. The long term goal is to remove this
method altogether and use the iterators directly, but for introducing
the VFS into LLDB this change is sufficient.
Differential revision: https://reviews.llvm.org/D53785
llvm-svn: 345800
The new implementation of EnumerateDirectory relies on `::no_push()`
being implemented for the VFS recursive directory iterators. However
this patch (D53465) hasn't been landed yet.
llvm-svn: 345787
This patch extends the FileSystem class with a bunch of functions that
are currently implemented as methods of the FileSpec class. These
methods will be removed in future commits and replaced by calls to the
file system.
The new functions are operated in terms of the virtual file system which
was recently moved from clang into LLVM so it could be reused in lldb.
Because the VFS is stateful, we turned the FileSystem class into a
singleton.
Differential revision: https://reviews.llvm.org/D53532
llvm-svn: 345783
This is NFC to clean up the `DWARFFormValue::ExtractValue`.
It groups similar `DW_FORM_*` and removes an excessive
assignment of `ref_addr_size` (it was assigned right after in any case).
llvm-svn: 345733
We need the install-liblldb-stripped target to depend on the
lldb-framework target in order for the installation to be guaranteed to
behave correctly, otherwise it's possible for the lldb-framework and
install-liblldb-stripped targets to run in parallel, resulting in
temporary or partially processed files being copied into the framework.
install-liblldb already depends on lldb-framework for this reason.
Differential Revision: https://reviews.llvm.org/D53917
llvm-svn: 345711
This adds the support for DW_FORM_addrx, DW_FORM_addrx1,
DW_FORM_addrx2, DW_FORM_addrx3, DW_FORM_addrx4 forms.
Differential revision: https://reviews.llvm.org/D53813
llvm-svn: 345706
This patch introduces a concept of "frame recognizer" and "recognized frame". This should be an extensible mechanism that retrieves information about special frames based on ABI, arguments or other special properties of that frame, even without source code. A few examples where that could be useful could be 1) objc_exception_throw, where we'd like to get the current exception, 2) terminate_with_reason and extracting the current terminate string, 3) recognizing Objective-C frames and automatically extracting the receiver+selector, or perhaps all arguments (based on selector).
Differential Revision: https://reviews.llvm.org/D44603
llvm-svn: 345693
David Carlier