r305022 assumed that floatLiteral(equals(1.2)) would also match 1.2f and
1.2l, but apparently that is not the case. Until it is clear how to
match, temporary disable the test to fix CI.
llvm-svn: 305025
Summary:
This allows the clang-query tool to use matchers like
"integerLiteral(equals(32))". For this to work, an overloaded function
is added for each possible parameter type.
Reviewed By: aaron.ballman
Differential Revision: https://reviews.llvm.org/D33094
llvm-svn: 305022
Summary:
AllKindInfo is being indexed by NodeKindId, so the order must match.
Extended ASTTypeTraits tests to cover this.
Reviewers: sbenza
Subscribers: cfe-commits, klimek
Differential Revision: http://reviews.llvm.org/D19059
llvm-svn: 266268
This relands r250831 after some fixes to shrink the ParentMap overall
with one addtional tweak: nodes with pointer identity (e.g. Decl* and
friends) can be store more efficiently so I put them in a separate map.
All other nodes (so far only TypeLoc and NNSLoc) go in a different map
keyed on DynTypedNode. This further uglifies the code but significantly
reduces memory overhead.
Overall this change still make ParentMap significantly larger but it's
nowhere as bad as before. I see about 25 MB over baseline (pre-r251008)
on X86ISelLowering.cpp. If this becomes an issue we could consider
splitting the maps further as DynTypedNode is still larger (32 bytes)
than a single TypeLoc (16 bytes) but I didn't want to introduce even
more complexity now.
Differential Revision: http://reviews.llvm.org/D14011
llvm-svn: 251101
The MemoizationData cache was introduced to avoid a series of enum
compares at the cost of making DynTypedNode bigger. This change reverts
to using an enum compare but instead of building a chain of comparison
the enum values are reordered so the check can be performed with a
simple greater than. The alternative would be to steal a bit from the
enum but I think that's a more complex solution and not really needed
here.
I tried this on several large .cpp files with clang-tidy and didn't
notice any performance difference. The test change is due to matchers
being sorted by their node kind.
Differential Revision: http://reviews.llvm.org/D13946
llvm-svn: 250905
Putting DynTypedNode in the ParentMap bloats its memory foot print.
Before the void* key had 8 bytes, now we're at 40 bytes per key which
can mean multiple gigabytes increase for large ASTs and this count
doesn't even include all the added TypeLoc nodes. Revert until I come
up with a better data structure.
This reverts commit r250831.
llvm-svn: 250889
Firstly this changes the type of parent map to be keyed on DynTypedNode to
simplify the following changes. This comes with a DenseMapInfo for
DynTypedNode, which is a bit incomplete still and will probably only work
for parentmap right now.
Then the RecursiveASTVisitor in ASTContext is updated and finally
ASTMatchers hasParent and hasAncestor learn about the new functionality.
Now ParentMap is only missing TemplateArgumentLocs and CXXCtorInitializers.
Differential Revision: http://reviews.llvm.org/D13897
llvm-svn: 250831
Summary:
Change r219118 fixed the bug for anyOf and eachOf, but it is still
present for unless.
The variadic wrapper doesn't have enough information to know how to
restrict the type. Different operators handle restrict failures in
different ways.
Reviewers: klimek
Subscribers: klimek, cfe-commits
Differential Revision: http://reviews.llvm.org/D5731
llvm-svn: 219622
Summary:
There was an assumption that there were no matchers that were overloaded
on matchers and other types of arguments.
This assumption was broken recently with the addition of new matcher
overloads.
Fixes http://llvm.org/PR21226
Reviewers: pcc
Subscribers: klimek, cfe-commits
Differential Revision: http://reviews.llvm.org/D5711
llvm-svn: 219450
Summary:
DynTypedMatcher::constructVariadic() where the restrict kind of the
different matchers are not related causes the matcher to have a "None"
restrict kind. This causes false negatives for anyOf and eachOf.
Change the logic to get a common ancestor if there is one.
Also added regression tests that fail without the fix.
Reviewers: klimek
Subscribers: klimek, cfe-commits
Differential Revision: http://reviews.llvm.org/D5580
llvm-svn: 219118
Summary:
This includes:
- Passing a Sema to completeExpression to allow for named values in the
expression.
- Passing a map of names to values to the parser.
- Update the Sema interface to include completion for matchers.
- Change the parser to use the Sema for completion, instead of going
directly to Registry.
Reviewers: pcc
Subscribers: klimek, cfe-commits
Differential Revision: http://reviews.llvm.org/D3509
llvm-svn: 215472
Summary: Add support for named values in the parser.
Reviewers: pcc
CC: cfe-commits, klimek
Differential Revision: http://llvm-reviews.chandlerc.com/D3276
llvm-svn: 206176
Summary:
Add loc() to the dynamic registry.
Other fixes:
- Fix the polymorphic variant value to accept an exact match, even if
there are other possible conversions.
- Fix specifiesTypeLoc() to not crash on an empty
NestedNameSpecifierLoc.
Reviewers: klimek
CC: cfe-commits, klimek
Differential Revision: http://llvm-reviews.chandlerc.com/D2928
llvm-svn: 203467
This returns a list of valid (and useful) completions for a context (a list
of outer matchers), ordered by decreasing relevance then alphabetically. It
will be used by the matcher parser to implement completion.
Differential Revision: http://llvm-reviews.chandlerc.com/D2210
llvm-svn: 199950
encodes the canonical rules for LLVM's style. I noticed this had drifted
quite a bit when cleaning up LLVM, so wanted to clean up Clang as well.
llvm-svn: 198686
Summary:
Make the negative test more specific.
Otherwise it can accidentally match injected code.
Reviewers: aaron.ballman
CC: klimek, cfe-commits, revane
Differential Revision: http://llvm-reviews.chandlerc.com/D2257
llvm-svn: 195512
Summary: Add support for the 'unless' matcher in the dynamic layer.
Reviewers: klimek
CC: cfe-commits, revane, klimek
Differential Revision: http://llvm-reviews.chandlerc.com/D2247
llvm-svn: 195466
Summary:
Add partial support for the hasDeclaration() matcher in the dynamic layer.
This matcher has some special logic to allow any type that has a getDecl() method. We do not support this right now.
Reviewers: klimek
CC: cfe-commits, revane
Differential Revision: http://llvm-reviews.chandlerc.com/D1889
llvm-svn: 195013
The environments can inject some declaration in every translation unit,
which can match very generic matchers, thus failing the tests.
Summary:
Fix tests to be more specific.
The environments can inject some declaration in every translation unit,
which can match very generic matchers, thus failing the tests.
Reviewers: aaron.ballman
CC: klimek, cfe-commits, revane
Differential Revision: http://llvm-reviews.chandlerc.com/D1541
llvm-svn: 189587
Summary:
Add support for eachOf/allOf/anyOf variadic matchers in the dynamic layer.
These function require some late binding behavior for the type conversions, thus changes in VariadicValue's MatcherList.
Second try. This time with a fix for C++11 builds.
Reviewers: klimek
CC: cfe-commits, revane
Differential Revision: http://llvm-reviews.chandlerc.com/D1536
llvm-svn: 189500
Summary:
Add support for eachOf/allOf/anyOf variadic matchers in the dynamic layer.
These function require some late binding behavior for the type conversions, thus changes in VariadicValue's MatcherList.
Reviewers: klimek
CC: cfe-commits, revane
Differential Revision: http://llvm-reviews.chandlerc.com/D1531
llvm-svn: 189362
Summary:
Refactor "MatcherList" into "VariantMatcher" and abstract the notion of a list of matchers for the polymorphic case.
This work is to support future changes needed for eachOf/allOf/anyOf matchers. We will add a new type on VariantMatcher.
Reviewers: klimek
CC: cfe-commits, revane
Differential Revision: http://llvm-reviews.chandlerc.com/D1365
llvm-svn: 188272
Summary:
Add support for Adaptative matchers on the dynamic registry.
Each adaptative matcher is created with a function template. We instantiate the function N times, one for each possible From type and apply the techniques used on argument overloaded and polymorphic matchers to add them to the registry.
Reviewers: klimek
CC: cfe-commits, revane
Differential Revision: http://llvm-reviews.chandlerc.com/D1201
llvm-svn: 187044
Summary:
Add support for overloaded matchers.
This composes with other features, like supporting polymorphic matchers.
Reviewers: klimek
CC: cfe-commits, revane
Differential Revision: http://llvm-reviews.chandlerc.com/D1188
llvm-svn: 186836
Summary:
Add printToStream*(llvm::raw_ostream&) methods to Diagnostics, and reimplement everything based on streams instead of concatenating strings.
Also, fix some functions to start with lowercase to match the style guide.
Reviewers: klimek
CC: cfe-commits, revane
Differential Revision: http://llvm-reviews.chandlerc.com/D1187
llvm-svn: 186715
Summary:
Continue adding more matchers to the dynamic registry.
This time, we add TemplateArgument matchers.
Reviewers: klimek
CC: cfe-commits, revane
Differential Revision: http://llvm-reviews.chandlerc.com/D1166
llvm-svn: 186514
Summary: Now that CXXCtorInitializer is already supported in ASTNodeKind, add CXXCtorInitializer matchers to the dynamic matcher registry.
Reviewers: klimek
CC: cfe-commits, revane
Differential Revision: http://llvm-reviews.chandlerc.com/D1158
llvm-svn: 186508
Summary:
Fixup the type traversal macros/matchers to specify the supported types.
Make the marshallers a little more generic to support any variadic function.
Update the doc script.
Reviewers: klimek
CC: cfe-commits, revane
Differential Revision: http://llvm-reviews.chandlerc.com/D1023
llvm-svn: 186340
- Added conversion routines and checks in Matcher<T> that take a DynTypedMatcher.
- Added type information on the error messages for the marshallers.
- Allows future work on Polymorphic/overloaded matchers. We should be
able to disambiguate at runtime and choose the appropriate overload.
llvm-svn: 184429
This library supports all the features of the compile-time based ASTMatcher
library, but allows the user to specify and construct the matchers at runtime.
It contains the following modules:
- A variant type, to be used by the matcher factory.
- A registry, where the matchers are indexed by name and have a factory method
with a generic signature.
- A simple matcher expression parser, that can be used to convert a matcher
expression string into actual matchers that can be used with the AST at
runtime.
Many features where omitted from this first revision to simplify this code
review. The main ideas are still represented in this change and it already has
support working use cases.
Things that are missing:
- Support for polymorphic matchers. These requires supporting code in the
registry, the marshallers and the variant type.
- Support for numbers, char and bool arguments to the matchers. This requires
supporting code in the parser and the variant type.
- A command line program putting everything together and providing an already
functional tool.
Patch by Samuel Benzaquen.
llvm-svn: 181768