GlobalAlias handling used to be after GlobalValue handling, which meant it was, in practice, dead code. r220165 moved GlobalAlias handling to be before GlobalValue handling, but also moved it to be before the max depth check, causing an assert due to a recursion depth limit violation.
This moves GlobalAlias handling forward to where it's safe, and changes the GlobalValue handling to only look at GlobalObjects.
Differential Revision: http://reviews.llvm.org/D6758
llvm-svn: 224765
It is tempting to mark the fixed stack slot used to store the return address as
immutable when lowering @llvm.returnaddress(i32 0). Unfortunately, within the
function, it is not completely immutable: it is written during the function
prologue. When using post-RA instruction scheduling, the prologue instructions
are available for scheduling, and we're not free to interchange the order of a
particular store in the prologue with loads from that stack location.
Fixes PR21976.
llvm-svn: 224761
In r224033, in moving the signed power-of-2 division expansion into
BuildSDIVPow2, I accidentally made it possible to attempt the lowering for a
64-bit division on PPC32. This later asserts.
Fixes PR21928.
llvm-svn: 224758
- Fix the case where more than 1 common instructions derived from the same
operand cannot be sunk. When a pair of value has more than 1 derived values
in both branches, only 1 derived value could be sunk.
- Replace BB1 -> (BB2, PN) map with joint value map, i.e.
map of (BB1, BB2) -> PN, which is more accurate to track common ops.
llvm-svn: 224757
A cast that was introduced in r209007 was accidentally left in after the changes made to GlobalAlias rules in r210062. This crashes if the aliasee is a now-leggal ConstantExpr.
llvm-svn: 224756
r223862/r224203 tried to also combine base-updating load/stores.
There was a mistake there: the alignment was added as is as an operand to
the ARMISD::VLD/VST node. However, the VLD/VST selection logic doesn't care
about less-than-standard alignment attributes.
For example, no matter the alignment of a v2i64 load (say 1), SelectVLD picks
VLD1q64 (because of the memory type). But VLD1q64 ("vld1.64 {dXX, dYY}") is
8-aligned, per ARMARMv7a 3.2.1.
For the 1-aligned load, what we really want is VLD1q8.
This commit introduces bitcasts if necessary, and changes the vld/vst type to
one whose standard alignment matches the original load/store alignment.
Differential Revision: http://reviews.llvm.org/D6759
llvm-svn: 224754
The SFINAE on the function __mu(Fn, Args...) that evaluates nested bind
expressions always tries to deduce the return type for Fn(Args...) even when Fn
is not a nested bind expression. This can cause hard compile errors when the
instantation of Fn(Args...) is ill-formed. This patch prevents the instantation
of __invoke_of<Fn, Args...> unless Fn is actually a bind expression.
Bug reportand patch from Michel Morin.
http://llvm.org/bugs/show_bug.cgi?id=22003
llvm-svn: 224753
fragmented variables.
This caused codegen to start crashing when we built somewhat large
programs with debug info and optimizations. 'check-msan' hit in, and
I suspect a bootstrap would as well. I mailed a test case to the
review thread.
llvm-svn: 224750
The compiler-rt CMake build currently uses -gline-tables-only for all builds. While this makes the debugger correctly map source files, debugging of the runtime libraries in general is pretty tough, because you don't see any local variables, parameters, etc. Let's allow emitting full debugging info by setting COMPILER_RT_DEBUG=ON.
Reviewed at http://reviews.llvm.org/D6764
llvm-svn: 224749
When combining consecutive loads+inserts into a single vector load,
we should keep the alignment of the base load. Doing otherwise can, and does,
lead to using overly aligned instructions. In the included test case, for
example, using a 32-byte vmovaps on a 16-byte aligned value. Oops.
rdar://19190968
llvm-svn: 224746
Previously I tried to plug musttail into the existing vararg lowering
code. That turned out to be a mistake, because non-vararg calls use
significantly different register lowering, even on x86. For example, AVX
vectors are usually passed in registers to normal functions and memory
to vararg functions. Now musttail uses a completely separate lowering.
Hopefully this can be used as the basis for non-x86 perfect forwarding.
Reviewers: majnemer
Differential Revision: http://reviews.llvm.org/D6156
llvm-svn: 224745
Since these are all created in the DenseMap before they are referenced,
there's no problem with pointer validity by the time it's required. This
removes another use of DeleteContainerSeconds/manual memory management
which I'm cleaning up from time to time.
llvm-svn: 224744
Followup to r224294:
ARM/AArch64: Attach the FrameSetup MIFlag to CFI instructions.
Debug info marks the first instruction without the FrameSetup flag
as being the end of the function prologue. Any CFI instructions in the
middle of the function prologue would cause debug info to end the prologue
too early and worse, attach the line number of the CFI instruction, which
incidentally is often 0.
llvm-svn: 224743
a time into a partition iterator and a Partition class.
There is a lot of knock-on simplification that this enables, largely
stemming from having a Partition object to refer to in lots of helpers.
I've only done a minimal amount of that because enoguh stuff is changing
as-is in this commit.
This shouldn't change any observable behavior. I've worked hard to
preserve the *exact* traversal semantics which were originally present
even though some of them make no sense. I'll be changing some of this in
subsequent commits now that the logic is carefully factored into
a reusable place.
The primary motivation for this change is to break the rewriting into
phases in order to support more intelligent rewriting. For example, I'm
planning to change how split loads and stores are rewritten to remove
the significant overuse of integer bit packing in the resulting code and
allow more effective secondary splitting of aggregates. For any of this
to work, they have to share the exact traversal logic.
llvm-svn: 224742
Summary:
MSAN and ASAN also replace new/delete which leads to a link error in these tests. Currently they are unsupported but I think it would be useful if these tests could run with sanitizers.
This patch creates a support header that consolidates the new/delete replacement functionality and checking.
When we are using sanitizers new and delete are no longer replaced and the checks always return true.
Reviewers: mclow.lists, danalbert, jroelofs, EricWF
Reviewed By: EricWF
Subscribers: cfe-commits
Differential Revision: http://reviews.llvm.org/D6562
llvm-svn: 224741
Take two disjoint Loops L1 and L2.
LoopSimplify fails to simplify some loops (e.g. when indirect branches
are involved). In such situations, it can happen that an exit for L1 is
the header of L2. Thus, when we create PHIs in one of such exits we are
also inserting PHIs in L2 header.
This could break LCSSA form for L2 because these inserted PHIs can also
have uses in L2 exits, which are never handled in the current
implementation. Provide a fix for this corner case and test that we
don't assert/crash on that.
Differential Revision: http://reviews.llvm.org/D6624
rdar://problem/19166231
llvm-svn: 224740
This allows us to generate debug info for extremely advanced code such as
typedef struct { long int a; int b;} S;
int foo(S s) {
return s.b;
}
which at -O1 on x86_64 is codegen'd into
define i32 @foo(i64 %s.coerce0, i32 %s.coerce1) #0 {
ret i32 %s.coerce1, !dbg !24
}
with this patch we emit the following debug info for this
TAG_formal_parameter [3]
AT_location( 0x00000000
0x0000000000000000 - 0x0000000000000006: rdi, piece 0x00000008, rsi, piece 0x00000004
0x0000000000000006 - 0x0000000000000008: rdi, piece 0x00000008, rax, piece 0x00000004 )
AT_name( "s" )
AT_decl_file( "/Volumes/Data/llvm/_build.ninja.release/test.c" )
Thanks to chandlerc, dblaikie, and echristo for their feedback on all
previous iterations of this patch!
llvm-svn: 224739
Previously we assumed the section name had the form .text$foo, which is
what we used to do for inline functions. If the dollar wasn't present,
we'd put unwind data in the .pdata and .xdata sections for the main
.text section, which is incorrect.
Fixes PR22001.
llvm-svn: 224738
Summary:
Protect CommonFlags singleton by adding const qualifier to
common_flags() accessor. The only ways to modify the flags are
SetCommonFlagsDefaults(), ParseCommonFlagsFromString() and
OverrideCommonFlags() functions, which are only supposed to be
called during initialization.
Test Plan: regression test suite
Reviewers: kcc, eugenis, glider
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D6741
llvm-svn: 224736
Summary:
In order to fully replace the testit script we need to update LIT so it provides the same functionality.
This patch adds a number of different configuration options to LIT to do that. It also adds documentation for all of the command line parameters that LIT supports.
Generic options added:
- `libcxx_headers`
- `libcxx_library`
- `compile_flags`
Generic options modified:
- `link_flags`: Changed from overriding the default args to adding extra args instead (to match compile flags)
- `use_sanitizer`: Renamed from `llvm_use_sanitizer`
Please see the added documentation for more information about the switches. As for the actual documentation I'm not sure if it should be kept in libc++ forever since it adds an undue maintenance burden, but I think it should be added for the time being while the changes are new. I'm verify unskilled with HTML so if the documentation needs any changes please let me know.
Hopefully this will kill testit.
Reviewers: jroelofs, mclow.lists, danalbert
Reviewed By: danalbert
Subscribers: alexfh, cfe-commits
Differential Revision: http://reviews.llvm.org/D5877
llvm-svn: 224728
Currently, when ctpop is supported for scalar types, the expansion of
@llvm.ctpop.vXiY uses vector element extractions, insertions and individual
calls to @llvm.ctpop.iY. When not, expansion with bit-math operations is used
for the scalar calls.
Local haswell measurements show that we can improve vector @llvm.ctpop.vXiY
expansion in some cases by using a using a vector parallel bit twiddling
approach, based on:
v = v - ((v >> 1) & 0x55555555);
v = (v & 0x33333333) + ((v >> 2) & 0x33333333);
v = ((v + (v >> 4) & 0xF0F0F0F)
v = v + (v >> 8)
v = v + (v >> 16)
v = v & 0x0000003F
(from http://graphics.stanford.edu/~seander/bithacks.html#CountBitsSetParallel)
When scalar ctpop isn't supported, the approach above performs better for
v2i64, v4i32, v4i64 and v8i32 (see numbers below). And even when scalar ctpop
is supported, this approach performs ~2x better for v8i32.
Here, x86_64 implies -march=corei7-avx without ctpop and x86_64h includes ctpop
support with -march=core-avx2.
== [x86_64h - new]
v8i32: 0.661685
v4i32: 0.514678
v4i64: 0.652009
v2i64: 0.324289
== [x86_64h - old]
v8i32: 1.29578
v4i32: 0.528807
v4i64: 0.65981
v2i64: 0.330707
== [x86_64 - new]
v8i32: 1.003
v4i32: 0.656273
v4i64: 1.11711
v2i64: 0.754064
== [x86_64 - old]
v8i32: 2.34886
v4i32: 1.72053
v4i64: 1.41086
v2i64: 1.0244
More work for other vector types will come next.
llvm-svn: 224725
The default value of Opts.Trigraphs now no longer depends solely on the
language input kind, so move the code out of setLangDefaults(). Also make
sure that Opts.MSVCCompat is set before the Trigraph code runs.
Related to PR21974.
llvm-svn: 224719
The lit.cfg files only add .cpp to suffixes, so these tests used to never run,
oops. (Also tweak to of these tests in minor ways to make the actually pass.)
llvm-svn: 224718
Colin LeMahieu