definition below all of the header #include lines, Polly edition.
If you want to know more details about this, you can see the recent
commits to Debug.h in LLVM. This is just the Polly segment of a cleanup
I'm doing globally for this macro.
llvm-svn: 206852
Commit r206510 falsely advertised to fix the load cases, even though it only
fixed the store case. This commit adds the same fix for the load case including
the missing test coverage.
llvm-svn: 206577
Even tough we may want to generate a vector load, the address from which to load
still is a scalar. Make sure even if previous address computations may have been
vectorized, that the addresses are also available as scalars.
This fixes http://llvm.org/PR19469
Reported-by: Jeremy Huddleston Sequoia <jeremyhu@apple.com>
llvm-svn: 206510
The following example shows a non-parallel loop
void f(int a[]) {
int i;
for (i = 0; i < 10; ++i)
A[i] = A[i+5];
}
which, in case we import a schedule that limits the iteration domain
to 0 <= i < 5, becomes parallel. Previously we crashed in such cases, now we
just recognize it as parallel.
This fixes http://llvm.org/PR19435
Reported-by: Jeremy Huddleston Sequoia <jeremyhu@apple.com>
llvm-svn: 206318
We update to a newer version of isl, which includes changes to the compute
out facility that make it a lot more predicable. With our new value, we can
reliably bail out for all reported bugs, while still being able to compute
dependences for all but two test cases in the LLVM test suite. For the remaining
two test cases, the dependence problem we construct is unnecessarily complex,
so there is hope we can improve on this. However, to avoid any future issues,
having a reliable compute out facility in place is important.
llvm-svn: 206106
We only supported a very old version of OpenScop that was entirely different
to what OpenScop is today. To not confuse people, we remove this old and
unusable support. If anyone is interested to add OpenScop support back in,
the relevant patches are available in version control.
llvm-svn: 206026
Reversed the order in which LD_LIBRARY_PATH is defined in order to make sure the
${CLOOG_INSTALL} prefix is found first.
Contributed-by: Christian Bielert <cib123@googlemail.com>
llvm-svn: 205556
This replaces the ancient INVALID/INVALID_NOVERIFY macros with a real
function.
The new invalid(..) function uses small diagnostic objects that are
generated on demand. We can store arbitrary additional information per
error type and generate useful debug/error messages on the fly.
Use it as follows:
if (/* Some error condition (ReportFoo) */)
invalid<ReportFoo>(Context, /*Assert=*/true/false,
(/* List of helpful diagnostic objects */));
Where ReportFoo is a subclass of RejectReason that is able to take the
list of helpful diagnostic objects in its constructor.
The implementation of invalid will create the report and fire
an assertion, if necessary.
llvm-svn: 205414
During code preperation trivial PHI nodes (mainly introduced by lcssa) are
deleted to decrease the number of introduced allocas (==> dependences). However
simply replacing them by their only incoming value would cause the independent
block pass to introduce new allocas. To prevent this we try to share stack slots
during code preperarion, hence to reuse a already created alloca 'to demote' the
trivial PHI node. This works if we know that the value stored in this alloca
will be the incoming value of the trivial PHI at the end of the predecessor
block of this trivial PHI.
Contributed-by: Johannes Doerfert <doerfert@cs.uni-saarland.de>
llvm-svn: 205320
We explicitly specifying all filenames instead of assuming some naming
convention used by clang and opt.
Contributed-by: Johannes Doerfert <doerfert@cs.uni-saarland.de>
llvm-svn: 204726
For complex examples it may happen that we do not compute dependences. In this
case we do not want to crash, but just not detect parallel loops.
llvm-svn: 204470
It does not seem to add a lot of value, as it leaves unclear which parts are
mature and whichs not. Adding this informatin also does not make sense, as it
changes rapidly.
llvm-svn: 204447
This patch enables vectorization of loops containing backward array
traversal (array stride is -1).
Contributed-by: Chris Jenneisch <chrisj@codeaurora.org>
llvm-svn: 204257
This ensures that the polly passes get properly registered both, when using
polly as a loadable module and when directly linking it into clang/opt/bugpoint.
llvm-svn: 204255
llvm.org/PR19081 reports that the polly dependence analysis causes some h264
compilation to hang. We adjust the compute out, to ensure we do not block on
expensive dependence calculations.
llvm-svn: 204168
This reverts the broken modularized build.
This builds the classic loadable module. The separation
of library and plugin is yet to be done in a future patch.
llvm-svn: 203952
to avoid build errors like this:
In file included from ../include/llvm/IR/IntrinsicInst.h:30:0,
from ../tools/polly/lib/CodeGen/BlockGenerators.cpp:28:
../include/llvm/IR/Intrinsics.h:41:34: fatal error: llvm/IR/Intrinsics.gen: No such file or directory
The earlier change in commit b1d2e6d5c3ce151ef6b7213c00019715e63d7cfb has been
accidentally reverted in:
commit 6b1963814877f5b1b161d3a73a3c8246c4ad4787
Author: simbuerg <simbuerg@91177308-0d34-0410-b5e6-96231b3b80d8>
Date: Tue Mar 11 21:26:06 2014 +0000
Refactor Polly's Pass creation and initialization.
Rename some files and adjust cmake accordingly
llvm-svn: 203843
In case we are at the innermost band, we try to prepare for vectorization. This
means, we look for the innermost parallel loop and strip mine this loop to the
innermost level using a strip-mine factor corresponding to the number of vector
iterations.
For whatever reason, the code that implemented this feature was broken. We now
added a comment, a test case and obviously also the right code.
llvm-svn: 203544
1) The isl_int -> isl_val changes are the ones Tobias suggested.
One additional isl_val_free is added (and needed)
2) Three scoplib_vector_free are added, maybe we would need even
more (and matrix_free) but it's hard to place them right.
3) Cleaned the includes (and removed 'extern C')
This fixes the broken compilation for the scoplib import and export.
Contributed-by: Johannes Doerfert <doerfert@cs.uni-saarland.de>
llvm-svn: 203500
to avoid build errors like this:
In file included from ../include/llvm/IR/IntrinsicInst.h:30:0,
from ../tools/polly/lib/CodeGen/BlockGenerators.cpp:28:
../include/llvm/IR/Intrinsics.h:41:34: fatal error: llvm/IR/Intrinsics.gen: No such file or directory
llvm-svn: 203495
This is necessary to avoid test failures in the CLooG test suite due to the
recent isl update.
We also need to update two polly test cases which rely on a certain order in the
textual description that isl chooses for its sets and maps. Changes here are not
often, but we should probably switch to a check that verifies such maps are
semantically equivalent instead of represented identically.
llvm-svn: 203476
Older isl versions did not properly guard all function declarations for the
use in C++. Specifically, the isl/val_gmp.h header was not properly guarded.
This patch ensures we have the proper guards in place and do not accidentally
link to name-mangled C++ versions of those functions that are not available in
libisl.so.
llvm-svn: 203462
Value::user_iterator changes in LLVM r203364. Converts several of these
loops to nice range based loops in the process.
Built and tested cleanly for me, yay for being able to fully build and
test Polly changes!
llvm-svn: 203381
We currently need to always name instructions, as the polly test suite currently
matches for certain names. We should improve the test suite at some point.
This fixes 'make check-polly' in NDEBUG builds.
llvm-svn: 202855
For now we only mark innermost loops for the loop vectorizer. We could later
also mark not-innermost loops to enable the introduction of openmp parallelism.
llvm-svn: 202854
PollyIRBuilder is currently just a typedef to IRBuilder<>. Consequently, this
change should not affect behavior. In subsequent patches we will extend its
functionality to emit loop.parallel metadata.
llvm-svn: 202853
This fixes the buildbots who failed, because the linker eliminated most of the
Polly functionality when building without BUILD_SHARED_LIBS=ON.
Besides fixing the build, this change also brings additional functionality. With
the new separation between the general polly libraries and the functionality for
the polly module, it is now possible to link polly directly into a tool instead
of using requiring users to load a shared library.
llvm-svn: 202762
The module LLVMPolly.so links to that. There is really no reason to build a
large number of mini-libraries here, especially as we do have dependences
between the libraries that are not properly handled and that make linking fail
on darwin.
Submitted-by: David Fang <fang@csl.cornell.edu>
llvm-svn: 202743
We mostly iterate over read-only values. Following a suggestion by Duncan P.N
Exons Smith, we use the construct 'const auto &' for this.
llvm-svn: 202651
clang-formats behaviour has changed for a couple of C++11 formattings. We adapt
Polly to ensure our formatting checks are clean again.
llvm-svn: 202650
clang-format requires a space before the ":" in the foreach loop. Even though
this is surprising to me, we follow this style to make our formatting
consistent with clang-format. I found that this clang-format style is used in a
couple of C++11 examples, hence I believe the fact that clang-format adds a
colon is not a bug but just something I was not used to yet.
llvm-svn: 202648
In 'obsequi' we have a scop in which the current dead code elimination works,
but the generated code is way too complex. To avoid this trouble (and to not
disable the DCE entirely) we add an additional approximative step before
the actual dead code elimination. This should fix one of the two current
nightly-test issues.
Polly could be improved to handle 'obsequi' by teaching it to introduce only a
single parameter for (%1 and zext %1) which halves the number of parameters and
allows polly to derive a simpler representation for the set of live iterations.
However, this needs some time to investigate.
I will commit a test case as soon as we have a reduced one.
llvm-svn: 202010
Sven suggested to use this simpler code generation strategy as the convex_hull
computation is apparently rather inefficient. We do not have a test case that
shows a difference, but, in case we find a test case where this makes a
difference, we can reconsider our decission.
llvm-svn: 201997
In case we do not have valid dependences, we do not run dead code elimination or
the schedule optimizer. This fixes an infinite loop in the dead code
elimination (PR12110).
llvm-svn: 201982
Instead of giving a choice between a precise (but possibly very complex)
analysis and an approximative analysis we now use a hybrid approach which uses N
precise steps followed by one approximating step. The precision of the analysis
can be changed by increasing N. With a default of 'N' = 2, we get fully precise
results for our current test cases and should not run into performance problems
for more complex test cases. We can adjust this value when we got more
experience with this dead code elimination.
llvm-svn: 201888
In case the domain of a statement is empty, the schedule optimizer set by
accident the schedule to a NULL pointer. This is incorrect. Instead, we set
it to an empty isl_map with zero schedule dimensions. We already checked for
this in our test cases, but unfortunately the test cases did not fail as
expected. The assert we add in this commit now ensures that the test cases
fail properly in case we regress on this again.
llvm-svn: 201886
We now skip the debug intrinsics which is a lot better than crashing due to
uncopied metadata references. We should step by step investigate which debug
intrinsics we can copy without trouble.
We still keep the debug location metadata.
llvm-svn: 201860
This pass eliminates loop iterations that compute results that are not used
later on. This can help e.g. in D, where the default zero-initialization is
often unnecessary if right after new values are assigned to an array.
Contributed-by: Peter Conn <conn.peter@gmail.com>
llvm-svn: 201817
We do not have a use for this information at the moment. If we need this at some
point, the "instruction -> access" mapping needs to be enhanced as a single
instruction could then possibly perform multiple accesses.
This patch allows us to build the polyhedral information for scops with scalar
dependences.
llvm-svn: 201815
In rare cases the modification of one scop can effect the validity of other
scops, as code generation of an earlier scop may make the scalar evolution
functions derived for later scops less precise. The example that triggered this
patch was a scop that contained an 'or' expression as follows:
%add13710 = or i32 %j.19, 1
--> {(1 + (4 * %l)),+,2}<nsw><%for.body81>
Scev could only analyze the 'or' as it knew %j.19 is a multiple of 2. This
information was not available after the first scop was code generated (or
independent-blocks was run on it) and SCEV could not derive a precise SCEV
expression any more. This means we could not any more code generate this SCoP.
My current understanding is that there is always the risk that an earlier code
generation change invalidates later scops. As the example we have seen here is
difficult to avoid, we use this occasion to guard us against all such
invalidations.
This patch "solves" this issue by verifying right before we start working on
a detected scop, if this scop is in fact still valid. This adds a certain
overhead. However the verification we run is anyways very fast and secondly
it is only run on detected scops. So the overhead should not be very large. As
a later optimization we could detect scops only on demand, such that we need
to run scop-detections always only a single time.
This should fix the single last failure in the LLVM test-suite for the new
scev-based code generation.
llvm-svn: 201593
The MayAliasSet class is currently not used and just confuses people. We can
reintroduce it in case need a more precise tracking of alias sets.
llvm-svn: 201191
There does not seem to be a reason that we can not support PHI nodes outside of
the scop that reference values within the SCoP. Or at least, the attached test
case seems to do the right thing. We remove the assert for now.
llvm-svn: 200427
In rare cases, a region R which is itself not valid has an indirect child region
that is valid. When R becomes part of a valid region by expansion of another
region, then all children of R have to be erased from the set of valid regions.
This patch ensures that indirect children are erased in addition to direct
children.
Contributed-by: Armin Groesslinger <armin.groesslinger@uni-passau.de>
Tobias: I added a reduced test case and adjusted the logic of the patch to
only recurse until the first child is found.
llvm-svn: 200411
Verification of base addresses is difficult as the independent blocks pass may
introduce aliasing that was not there during scop detection. As a midterm
solution -polly-codegen-scev will remove the need for the independent blocks
pass. For now, we do not verify at compile time that the independent blocks pass
does not make the base addresses loop invariant. Disabling this just removes
one of the multiple safety layers we have. We still can check for correctness
in our regression tests.
llvm-svn: 200315
Array base addresses need to be invariant in the region considered. The base
address has to be computed outside the region, or, when it is computed inside,
the value must not change with the iterations of the loops. For example, when a
two-dimensional array is represented as a pointer to pointers the base address
A[i] in an access A[i][j] changes with i; therefore, such regions have to be
rejected.
Contributed by: Armin Größlinger <armin.groesslinger@uni-passau.de>
llvm-svn: 200314
Restricting Polly to -O3 does not make a lot of sense as it is opt-in anyway
and users who specifically request it should get it. If this causes performance
problems we should rather address them by scheduling the right cleanup passes
then just prevent the user from trying.
Also restricting Polly to -O3 made bugpoint not work with the -O3 flag and polly
enabled.
llvm-svn: 200208
This is not only not necessary, but in case -03 changes this can actually
cause arbitrarily failing test cases such as, e.g., a recent change by Chandler
that caused -O3 to unroll the loop body, which made the loop we wanted to
detect disappear and consequently this test case fail.
llvm-svn: 200204
Count the number of computational steps that have been used to solve the
dependence problem and abort in case we reach the "compute-out". This ensures we
do not hang forever in cases the dependence problem is too difficult to solve.
There is just a single case in the LLVM test-suite that runs into the
compute-out. Even in this case, we can probably coalesce some of the parameters
(i32 b, i32 b zext i64, ...) to simplify the problem enough to not hit the
compute out. However, for now we set the compute out in place to address the
general issue. The compute out was choosen such that it stops on a recent laptop
after about 8 seconds.
llvm-svn: 200156
This includes the following very useful isl commit:
commit d962967ab42323ea5ca0398956fbff6a98c782fa
Author: Sven Verdoolaege <skimo@kotnet.org>
Date: Wed Dec 18 12:05:32 2013 +0100
allow the user to impose a bound on the number of low-level operations
This should allow the user to deterministically limit the effort spent on a
computation.
llvm-svn: 200155
This removes the last isl_int dependency in the default build. There are
still some in OpenScop and Scoplib. For those isl-0.12.2 still needs to be used.
llvm-svn: 199585
This brings in isl_val support from cloog and, most importantly the following
isl commit:
commit d962967ab42323ea5ca0398956fbff6a98c782fa
Author: Sven Verdoolaege <skimo@kotnet.org>
Date: Wed Dec 18 12:05:32 2013 +0100
allow the user to impose a bound on the number of low-level operations
This should allow the user to deterministically limit the effort spent on a
computation.
llvm-svn: 199582
This ModulePass schedules the set of Polly canonicalization passes. It is a
debugging tool that can be used to preoptimize .ll files for Polly processing.
llvm-svn: 198376
Also the code makes the impression this was happening, shouldEnablePolly()
always returns false for optlevel equal to zero. This was previously different,
but was accidentally changed by a commit a couple of months ago. As this
behavior was mainly a debugging tool and adding this to clang never really made
sense, we just remove the last traces.
llvm-svn: 198370
This fixes a crash that appeared when generating dotty graphs for functions
without loops (for which we do not calculate polyhedral information).
llvm-svn: 198364
Further:
o ensure that the header is properly readable even on smaller screen sizes.
o Shorten the table of contents of the documentation section.
llvm-svn: 197794
We now report the following:
$ polly-clang -O3 -mllvm -polly -mllvm -polly-report test.c -c \
-gline-tables-only
note: Polly detected an optimizable loop region (scop) in function 'foo'
test.c:2: Start of scop
test.c:3: End of scop
note: Polly detected an optimizable loop region (scop) in function 'bar'
test.c:9: Start of scop
test.c:13: End of scop
llvm-svn: 197558
We still have troubles as clang is not properly built yet. I messed up a path
in the PollyBuilder and am waiting for another buildmaster restart.
llvm-svn: 195520
For for-nodes that are translated to a set of vector lanes, we already know the
overall number of iterations. Calculating the upper bound is consequently not
necessary. This change removes the code for upper bound calculation, which was
probably copy/pasted from the code generation for the normal for-loop.
This issue was found by Sylvestre's scan-build server.
llvm-svn: 193925
When constructing a scop sometimes the exact representation of a statement or
condition would be very complex, but there is a common case which is a lot
simpler, but which is only valid under certain assumptions. The assumed context
records the assumptions taken during the construction of this scop and that need
to be code generated as a run-time test.
At the moment, we do not yet model any assumptions, but only added the
AssumedContext as well as the isl-ast generation support. As a next step,
this needs to be hooked up with the isl code generation.
if (1) /* run-time condition */
{ /* optimized code */ }
else
{ /* original code */ }
llvm-svn: 193652
Instead of defining the relevant functions inline, we now just keep the
declarations in the class itself. This makes the class declaration a lot
easier to read as all functions can be seen at once. We also use this
opportunity to privatize all functions not used in the public interface of the
class.
llvm-svn: 190841
Use 0 >= 1 instead of 0 != 0 to represent 'false'. This might be slightly more
efficient as isl may create a union of sets for 0 != 0, whereas this is never
needed for the expression 0 >= 1.
Contributed-by: Alexandre Isoard <alexandre.isoard@gmail.com>
llvm-svn: 190384
The Makefile rule "polly-test" has been renamed to
"check-polly" in r182171. This CL updates the document and
the automatic build script.
llvm-svn: 188624
SCoP invariant parameters with the different start value would deter parameter
sharing. For example, when compiling the following C code:
void foo(float *input) {
for (long j = 0; j < 8; j++) {
// SCoP begin
for (long i = 0; i < 8; i++) {
float x = input[j * 64 + i + 1];
input[j * 64 + i] = x * x;
}
}
}
Polly would creat two parameters for these memory accesses:
p_0: {0,+,256}
p_2: {4,+,256}
[j * 64 + i + 1] => MemRef_input[o0] : 4o0 = p_1 + 4i0
[j * 64 + i] => MemRef_input[o0] : 4o0 = p_0 + 4i0
These parameters only differ from start value. To enable parameter sharing,
we split the start value from SCEVAddRecExpr, so they would share a single
parameter that always has zero start value:
p0: {0,+,256}<%for.cond1.preheader>
[j * 64 + i + 1] => MemRef_input[o0] : 4o0 = 4 + p_1 + 4i0
[j * 64 + i] => MemRef_input[o0] : 4o0 = p_0 + 4i0
Such translation can make the polly-dependence much faster.
Contributed-by: Star Tan <tanmx_star@yeah.net>
llvm-svn: 187728
In case we detect that the schedule the user wants to import is invalid we
refuse it _and_ free the isl_maps containing it.
Another bug found thanks to Rafael.
llvm-svn: 187339
We now use __isl_take to annotate the uses of the isl_set where we got the
memory management wrong.
Thanks to Rafael! His pipefail work hardened our test environment and exposed
this bug nicely.
llvm-svn: 187338
Split the old getNewValue into two parts:
1. The function "lookupAvailableValue" that return the new version of
the instruction which is already available.
2. The function calls "lookupAvailableValue", and tries to generate
the new version if it is not available yet.
llvm-svn: 187114
String operations resulted by raw_string_ostream in the INVALID macro can lead
to significant compile-time overhead when compiling large size source code.
This is because raw_string_ostream relies on TypeFinder class, whose
compile-time cost increases as the size of the module increases. This patch
targets to ensure that it only track detection failures if actually needed.
In this way, we can avoid expensive string operations in normal execution.
With this patch file, the relative compile-time cost of Polly-detect pass does
not increase even when compiling very large size source code.
Contributed-by: Star Tan <tanmx_star@yeah.net>
llvm-svn: 187102
Ensure that the scalar write access corresponds to the result of a load
instruction appears after the generic read access corresponds to the load
instruction.
llvm-svn: 186419
Tobias Grosser