This patch implements input annotations for diagnostics that report
wrong-line matches for the directives CHECK-NEXT, CHECK-SAME, and
CHECK-EMPTY. Instead of the usual `^~~`, which is used by later
patches for good matches, these annotations use `!~~` to mark the bad
match ranges so that this category of errors is visually distinct.
Because such matches are errors, these annotates are red when colors
are enabled.
For example:
```
$ FileCheck -dump-input=help
The following description was requested by -dump-input=help to
explain the input annotations printed by -dump-input=always and
-dump-input=fail:
- L: labels line number L of the input file
- T:L labels the only match result for a pattern of type T from line L of
the check file
- T:L'N labels the Nth match result for a pattern of type T from line L of
the check file
- !~~ marks bad match, such as:
- CHECK-NEXT on same line as previous match (error)
- X~~ marks search range when no match is found, such as:
- CHECK-NEXT not found (error)
- ? marks fuzzy match when no match is found
- colors error, fuzzy match
If you are not seeing color above or in input dumps, try: -color
$ FileCheck -v -dump-input=always check2 < input2 |& sed -n '/^<<<</,$p'
<<<<<<
1: foo bar
next:2 !~~ error: match on wrong line
>>>>>>
$ cat check2
CHECK: foo
CHECK-NEXT: bar
$ cat input2
foo bar
```
Reviewed By: george.karpenkov, probinson
Differential Revision: https://reviews.llvm.org/D53894
llvm-svn: 349420
This patch implements input annotations for diagnostics that suggest
fuzzy matches for directives for which no matches were found. Instead
of using the usual `^~~`, which is used by later patches for good
matches, these annotations use `?` so that fuzzy matches are visually
distinct. No tildes are included as these diagnostics (independently
of this patch) currently identify only the start of the match.
For example:
```
$ FileCheck -dump-input=help
The following description was requested by -dump-input=help to
explain the input annotations printed by -dump-input=always and
-dump-input=fail:
- L: labels line number L of the input file
- T:L labels the only match result for a pattern of type T from line L of
the check file
- T:L'N labels the Nth match result for a pattern of type T from line L of
the check file
- X~~ marks search range when no match is found
- ? marks fuzzy match when no match is found
- colors error, fuzzy match
If you are not seeing color above or in input dumps, try: -color
$ FileCheck -v -dump-input=always check1 < input1 |& sed -n '/^<<<</,$p'
<<<<<<
1: ; abc def
2: ; ghI jkl
next:3'0 X~~~~~~~~ error: no match found
next:3'1 ? possible intended match
>>>>>>
$ cat check1
CHECK: abc
CHECK-SAME: def
CHECK-NEXT: ghi
CHECK-SAME: jkl
$ cat input1
; abc def
; ghI jkl
```
This patch introduces the concept of multiple "match results" per
directive. In the above example, the first match result for the
CHECK-NEXT directive is the failed match, for which the annotation
shows the search range. The second match result is the fuzzy match.
Later patches will introduce other cases of multiple match results per
directive.
When colors are enabled, `?` is colored magenta. That is, it doesn't
indicate the actual error, which a red `X~~` marker indicates, but its
color suggests it's closely related.
Reviewed By: george.karpenkov, probinson
Differential Revision: https://reviews.llvm.org/D53893
llvm-svn: 349419
Extend FileCheck to dump its input annotated with FileCheck's
diagnostics: errors, good matches if -v, and additional information if
-vv. The goal is to make it easier to visualize FileCheck's matching
behavior when debugging.
Each patch in this series implements input annotations for a
particular category of FileCheck diagnostics. While the first few
patches alone are somewhat useful, the annotations become much more
useful as later patches implement annotations for -v and -vv
diagnostics, which show the matching behavior leading up to the error.
This first patch implements boilerplate plus input annotations for
error diagnostics reporting that no matches were found for a
directive. These annotations mark the search ranges of the failed
directives. Instead of using the usual `^~~`, which is used by later
patches for good matches, these annotations use `X~~` so that this
category of errors is visually distinct.
For example:
```
$ FileCheck -dump-input=help
The following description was requested by -dump-input=help to
explain the input annotations printed by -dump-input=always and
-dump-input=fail:
- L: labels line number L of the input file
- T:L labels the match result for a pattern of type T from line L of
the check file
- X~~ marks search range when no match is found
- colors error
If you are not seeing color above or in input dumps, try: -color
$ FileCheck -v -dump-input=always check1 < input1 |& sed -n '/^Input file/,$p'
Input file: <stdin>
Check file: check1
-dump-input=help describes the format of the following dump.
Full input was:
<<<<<<
1: ; abc def
2: ; ghI jkl
next:3 X~~~~~~~~ error: no match found
>>>>>>
$ cat check1
CHECK: abc
CHECK-SAME: def
CHECK-NEXT: ghi
CHECK-SAME: jkl
$ cat input1
; abc def
; ghI jkl
```
Some additional details related to the boilerplate:
* Enabling: The annotated input dump is enabled by `-dump-input`,
which can also be set via the `FILECHECK_OPTS` environment variable.
Accepted values are `help`, `always`, `fail`, or `never`. As shown
above, `help` describes the format of the dump. `always` is helpful
when you want to investigate a successful FileCheck run, perhaps for
an unexpected pass. `-dump-input-on-failure` and
`FILECHECK_DUMP_INPUT_ON_FAILURE` remain as a deprecated alias for
`-dump-input=fail`.
* Diagnostics: The usual diagnostics are not suppressed in this mode
and are printed first. For brevity in the example above, I've
omitted them using a sed command. Sometimes they're perfectly
sufficient, and then they make debugging quicker than if you were
forced to hunt through a dump of long input looking for the error.
If you think they'll get in the way sometimes, keep in mind that
it's pretty easy to grep for the start of the input dump, which is
`<<<`.
* Colored Annotations: The annotated input is colored if colors are
enabled (enabling colors can be forced using -color). For example,
errors are red. However, as in the above example, colors are not
vital to reading the annotations.
I don't know how to test color in the output, so any hints here would
be appreciated.
Reviewed By: george.karpenkov, zturner, probinson
Differential Revision: https://reviews.llvm.org/D52999
llvm-svn: 349418
Now that MSVC compatibility versions are stored as a four digit number
(1912) instead of a two digit number (19), we need to adjust how we
handle this attribute.
Also add a new test that was intended to be part of r349414.
llvm-svn: 349415
Summary:
The msvc exception specifier for noexcept function types has changed
from the prior default of "Z" to "_E" if the function cannot throw when
compiling with /std:C++17.
Patch by Zachary Henkel!
Reviewers: zturner, rnk
Reviewed By: rnk
Subscribers: cfe-commits
Differential Revision: https://reviews.llvm.org/D55685
llvm-svn: 349414
present in the dSYM per-uuid plist, its precedence order with
the older DBGBuildSourcePath/DBGSourcePath, and note that
must be present and have a value of 3 or the dictionary
will be ignored.
<rdar://problem/46421686>
llvm-svn: 349409
Convert VSRAI to VSRLI is the sign bit is known zero and improve KnownBits output for all shift instruction.
Fixes the poor codegen comments in D55768.
llvm-svn: 349407
Summary:
We use `variable_ops` in the tablegen defs to denote the list of
branch targets in `br_table`, but unlike other uses of `variable_ops`
(e.g. call) the these branch targets need to actually be encoded in the
instruction. The existing tables for `variable_ops` cause not operands
to be accepted by the assembly matcher.
Following the example of ARM:
2cc0a7da87/lib/Target/ARM/ARMInstrInfo.td (L550-L555)
we introduce a new operand type to capture this list, and we use the
same {} syntax as ARM as well to differentiate them from regular
integer operands.
Also removed definition and use of TSFlags in tablegen defs, since
`br_table` now has a non-variable_ops immediate operand, so the
previous logic of only the variable_ops arguments being labels didn't
make sense anymore.
Reviewers: dschuff, aheejin, sunfish
Subscribers: javed.absar, sbc100, jgravelle-google, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D55401
llvm-svn: 349405
This was a pre-existing bug that could be triggered with assembly like
this:
.p2align 2
.LtmpN:
.cv_def_range "..."
I noticed this when attempting to change clang to emit aligned symbol
records.
llvm-svn: 349403
Summary:
This fixes the `ThreadSanitizer-x86_64-iossim` testsuite which broke
when r348770 (https://reviews.llvm.org/D55473) landed.
The root cause of the problem is that early-on during the iOS simulator
init process a call to `sysctlbyname` is issued. If the TSan initializer
is triggered at this point it will eventually trigger a call to
`__cxa_at_exit(...)`. This call then aborts because the library
implementing this function is not yet had its initialization function
called.
rdar://problem/46696934
Reviewers: kubamracek, george.karpenkov, devnexen, vitalybuka, krytarowski
Subscribers: #sanitizers, llvm-commits
Differential Revision: https://reviews.llvm.org/D55711
llvm-svn: 349402
make the executable name more unique.
This test is failing sporadically on some bots. By removing the sleep
synchronisation, I'm hoping to get it to fail more reproducibly so I
can investigate what is going on.
llvm-svn: 349397
Now, that we have funnel shift intrinsics, it should be safe to convert this form of rotate to it.
In the worst case (a target that doesn't have rotate instructions), we will expand this into a
branch-less sequence of ALU ops (neg/and/and/lshr/shl/or) in the backend, so it's still very
likely to be a perf improvement over the original code.
The motivating source code pattern for this is shown in:
https://bugs.llvm.org/show_bug.cgi?id=34924
Background:
I looked at several different options before deciding where to try this - instcombine, simplifycfg,
CGP - because it doesn't fit cleanly anywhere AFAIK.
The backend (CGP, SDAG, GlobalIsel?) is too late for what we're trying to accomplish. We want to
have the IR converted before we reach things like vectorization because the reduced code can make a
loop much simpler to transform.
Technically, this could be included in instcombine, but it's a large pattern match that includes
control-flow, so it just felt wrong to stuff into there (although I have a draft of that patch).
Similarly, this could be part of simplifycfg, but all of this pattern matching is a stretch.
So we're left with our relatively new dumping ground for homeless transforms: aggressive-instcombine.
This only runs at -O3, but that seems like a reasonable limitation given that source code has many
options to avoid this pattern (including the recently added clang intrinsics for rotates).
I'm including a PhaseOrdering test because we require the teamwork of 3 passes (aggressive-instcombine,
instcombine, simplifycfg) to get this into the minimal IR form that we want. That test shows a bug
with the new pass manager that's independent of this change (but it will be masked if we canonicalize
harder to funnel shift intrinsics in instcombine).
Differential Revision: https://reviews.llvm.org/D55604
llvm-svn: 349396
The test test/Driver/darwin-sdk-version.c from r349380 checks if the macOS
deployment target can be correctly inferred from the SDK version. When the
SDK version is > host version, the driver will pick the host version, so
the old test failed on macOS < 10.14. This commit makes this test more
resilient by using an older SDK version.
llvm-svn: 349393
The assertion type is always supposed to be a scalar type. So if the result VT of the assertion is a vector, we need to get the scalar VT before we can compare them.
Similarly for the assert above it.
I don't have a test case because I don't know of any place we violate this today. A coworker found this while trying to use r347287 on the 6.0 branch without also having r336868
llvm-svn: 349390
The problem is shown specifically for a case with vector multiply here:
https://bugs.llvm.org/show_bug.cgi?id=40032
...and this might mask the original backend bug for ARM shown in:
https://bugs.llvm.org/show_bug.cgi?id=39967
As the test diffs here show, we were (and probably still aren't) doing
these kinds of transforms in a principled way. We are producing more or
equal wide instructions than we started with in some cases, so we still
need to restrict/correct other transforms from overstepping.
If there are perf regressions from this change, we can either carve out
exceptions to the general IR rules, or improve the backend to do these
transforms when we know the transform is profitable. That's probably
similar to a change like D55448.
Differential Revision: https://reviews.llvm.org/D55744
llvm-svn: 349389
The code here wants the output section offset of the instruction
requiring the errata patch, not the virtual address. Without this
change we can end up placing a patch out of range if the virtual
address of the code section is large enough.
Differential Revision: https://reviews.llvm.org/D55732
llvm-svn: 349386
This allows a TEST to be used and can be combined with any AND that may already exist as an input to the shift.
This was already done in EmitTest, but was easily tricked by multiple uses because the setcc might be used by multiple instructions. Once the SETCC and users are legalized then we can look for the shift to be used by a single CMP, but the CMP itself can have multiple users.
This appears to fix the case in PR39968.
llvm-svn: 349385
Previously the code that parsed debug info to create lldb's Symbol
objects such as Variable, Type, Function, etc was tightly coupled
to the AST reconstruction code. This made it difficult / impossible
to implement functions such as ParseDeclsForContext() that were only
supposed to be operating on clang AST's. By splitting these apart,
the logic becomes much cleaner and we have a clear separation of
responsibilities.
llvm-svn: 349383
is not specified
The -target option allows the user to specify the build target using LLVM
triple. The triple includes the arch, and so the -arch option is redundant.
This should work just as well without the -arch. However, the driver has a bug
in which it doesn't target the "Cyclone" CPU for darwin if -target is used
without -arch. This commit fixes this issue.
rdar://46743182
Differential Revision: https://reviews.llvm.org/D55731
llvm-svn: 349382
On Darwin, using '-arch x86_64h' would always override the option passed
through '-march'.
This patch allows users to use '-march' with x86_64h, while keeping the
default to 'core-avx2'
Differential Revision: https://reviews.llvm.org/D55775
llvm-svn: 349381
pass in the -target-sdk-version to the compiler and backend
This commit adds support for reading the SDKSettings.json file in the Darwin
driver. This file is used by the driver to determine the SDK's version, and it
uses that information to pass it down to the compiler using the new
-target-sdk-version= option. This option is then used to set the appropriate
SDK Version module metadata introduced in r349119.
Note: I had to adjust the two ast tests as the SDKROOT environment variable
on macOS caused SDK version to be picked up for the compilation of source file
but not the AST.
rdar://45774000
Differential Revision: https://reviews.llvm.org/D55673
llvm-svn: 349380
Add a target_info definition for NetBSD. The definition is based
on the one used by FreeBSD, with libcxxrt replaced by libc++abi,
and using llvm-libunwind since we need to use its unwinder
implementation to build anyway.
Additionally, XFAIL the 30 tests that fail because of non-implemented
locale features. According to the manual, NetBSD implements only
LC_CTYPE part of locale handling. However, there is a locale database
in the system and locale specifications are validated against it,
so it makes sense to list the common locales as supported.
If I'm counting correctly, this change enables additional 43 passing
tests.
Differential Revision: https://reviews.llvm.org/D55767
llvm-svn: 349379
Remove the two test cases for \xDA and \xFA with UTF-8 locale, as both
characters alone are invalid in UTF-8 (short sequences). Upon removing
them, the test passes on Linux again (and also on NetBSD, after adding
appropriate locale configuration).
Differential Revision: https://reviews.llvm.org/D55746
llvm-svn: 349378
Summary: It looks like this support was added to match GNU AS, but only tests
.float and not .double. I asked RedHat folks to confirm that 0x7fffffffffffffff
was indeed the right value for NaN.
Same for infinity, but it only has positive / negative encodings.
Reviewers: scanon, rjmccall
Subscribers: jkorous, dexonsmith, llvm-commits
Differential Revision: https://reviews.llvm.org/D55531
llvm-svn: 349376
This is an initial patch to add the necessary support for a DemandedElts argument to SimplifyDemandedBits, more closely matching computeKnownBits and to help improve vector codegen.
I've added only a small amount of the changes necessary to get at least one test to update - a lot more can be done but I'd like to add these methodically with proper test coverage, at the same time the hope is to slowly move some/all of SimplifyDemandedVectorElts into SimplifyDemandedBits as well.
Differential Revision: https://reviews.llvm.org/D55768
llvm-svn: 349374
The --repl option was incorrectly defined as "Separate" (option and
value separated by a space). This resulted in the option not being
picked up when no value was specified.
This patch fixes the driver so that `--repl` is recognized again. I
split the option into two:
- A flag: `--repl` and `-r` which take no arguments.
- A joined option: `--repl=<flags>` and `-r=<flags>` that forward its
values to the repl.
This should match the driver's old behavior.
llvm-svn: 349371
Joel E. Denny