This patch upstreams support for the Arm-v8 Cortex-A78 and Cortex-X1
processors for AArch64 and ARM.
In detail:
- Adding cortex-a78 and cortex-x1 as cpu options for aarch64 and arm targets in clang
- Adding Cortex-A78 and Cortex-X1 CPU names and ProcessorModels in llvm
details of the CPU can be found here:
https://www.arm.com/products/cortex-xhttps://www.arm.com/products/silicon-ip-cpu/cortex-a/cortex-a78
The following people contributed to this patch:
- Luke Geeson
- Mikhail Maltsev
Reviewers: t.p.northover, dmgreen
Reviewed By: dmgreen
Subscribers: dmgreen, kristof.beyls, hiraditya, danielkiss, cfe-commits,
llvm-commits, miyuki
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D83206
This patch upstreams support for the Arm-v8 Cortex-A77
processor for AArch64 and ARM.
In detail:
- Adding cortex-a77 as a cpu option for aarch64 and arm targets in clang
- Cortex-A77 CPU name and ProcessorModel in llvm
details of the CPU can be found here:
https://www.arm.com/products/silicon-ip-cpu/cortex-a/cortex-a77
and a similar submission to GCC can be found here:
e0664b7a63
The following people contributed to this patch:
- Luke Geeson
- Mikhail Maltsev
Reviewers: t.p.northover, dmgreen, ostannard, SjoerdMeijer
Reviewed By: dmgreen
Subscribers: dmgreen, kristof.beyls, hiraditya, danielkiss, cfe-commits,
llvm-commits, miyuki
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D82887
This is the first checkin to support Marvell ThunderX3T110.
Initial definition of the micro-ops of the instructions in ThunderX3T110
is included.
Differential Revision: https://reviews.llvm.org/D78129
This patch upstreams support for the Armv8.6-a Matrix Multiplication
Extension. A summary of the features can be found here:
https://community.arm.com/developer/ip-products/processors/b/processors-ip-blog/posts/arm-architecture-developments-armv8-6-a
This patch includes:
- Command line options to enable these features with +i8mm, +f32mm, or f64mm
Note: +f32mm and +f64mm are optional and so are not enabled by default
This is part of a patch series, starting with BFloat16 support and
the other components in the armv8.6a extension (in previous patches
linked in phabricator)
Based on work by:
- Luke Geeson
- Oliver Stannard
- Luke Cheeseman
Reviewers: t.p.northover, DavidSpickett
Reviewed By: DavidSpickett
Subscribers: DavidSpickett, ostannard, kristof.beyls, danielkiss,
cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D77875
Summary:
This patch introduces command-line support for the Armv8.6-a architecture and assembly support for BFloat16. Details can be found
https://community.arm.com/developer/ip-products/processors/b/processors-ip-blog/posts/arm-architecture-developments-armv8-6-a
in addition to the GCC patch for the 8..6-a CLI:
https://gcc.gnu.org/legacy-ml/gcc-patches/2019-11/msg02647.html
In detail this patch
- march options for armv8.6-a
- BFloat16 assembly
This is part of a patch series, starting with command-line and Bfloat16
assembly support. The subsequent patches will upstream intrinsics
support for BFloat16, followed by Matrix Multiplication and the
remaining Virtualization features of the armv8.6-a architecture.
Based on work by:
- labrinea
- MarkMurrayARM
- Luke Cheeseman
- Javed Asbar
- Mikhail Maltsev
- Luke Geeson
Reviewers: SjoerdMeijer, craig.topper, rjmccall, jfb, LukeGeeson
Reviewed By: SjoerdMeijer
Subscribers: stuij, kristof.beyls, hiraditya, dexonsmith, danielkiss, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D76062
This patch upstreams support for the AArch64 Armv8-A cpu Cortex-A34.
In detail adding support for:
- mcpu option in clang
- AArch64 Target Features in clang
- llvm AArch64 TargetParser definitions
details of the cpu can be found here:
https://developer.arm.com/ip-products/processors/cortex-a/cortex-a34
Reviewers: SjoerdMeijer
Reviewed By: SjoerdMeijer
Subscribers: SjoerdMeijer, kristof.beyls, hiraditya, cfe-commits,
llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D74483
Change-Id: Ida101fc544ca183a0a0e61a1277c8957855fde0b
Apple's CPUs are called A7-A13 in official communication, occasionally with
weird suffixes which we probably don't need to care about. This adds each one
and describes its features. It also switches the default CPU to the canonical
name for Cyclone, but leaves legacy support in so that existing bitcode still
compiles.
is not specified
The -target option allows the user to specify the build target using LLVM
triple. The triple includes the arch, and so the -arch option is redundant.
This should work just as well without the -arch. However, the driver has a bug
in which it doesn't target the "Cyclone" CPU for darwin if -target is used
without -arch. This commit fixes this issue.
rdar://46743182
Differential Revision: https://reviews.llvm.org/D55731
llvm-svn: 349382
This patch allows targetting Armv8.5-A from Clang. Most of the
implementation is in TargetParser, so this is mostly just adding tests.
Patch by Pablo Barrio!
Differential revision: https://reviews.llvm.org/D52491
llvm-svn: 343111
Armv8.4-A adds a few FP16 instructions that can optionally be implemented
in CPUs of Armv8.2-A and above.
This patch adds a feature to clang to permit selection of these
instructions. This interacts with the +fp16 option as follows:
Prior to Armv8.4-A:
*) +fp16fml implies +fp16
*) +nofp16 implies +nofp16fml
From Armv8.4-A:
*) The above conditions apply, additionally: +fp16 implies +fp16fml
Patch by Bernard Ogden.
Differential Revision: https://reviews.llvm.org/D50229
llvm-svn: 342862
This adds tests for Armv8.4-A, and also some v8.2 and v8.3 tests that were
missing.
Differential Revision: https://reviews.llvm.org/D50068
llvm-svn: 338525
This patches adds support for passing -mcpu=native for AArch64. It will
get turned into the host CPU name, before we get the target features.
CPU = native is handled in a similar fashion in
getAArch64MicroArchFetauresFromMtune and getAArch64TargetCPU already.
Having a good test case for this is hard, as it depends on the host CPU
of the machine running the test. But we can check that native has been
replaced with something else.
When cross-compiling, we will get a CPU name from the host architecture
and get ` the clang compiler does not support '-mcpu=native'` as error
message, which seems reasonable to me.
Reviewers: rengolin, peter.smith, dlj, javed.absar, t.p.northover
Reviewed By: peter.smith
Tags: #clang
Differential Revision: https://reviews.llvm.org/D48931
llvm-svn: 336429
When -mtune is used on AArch64 the -target-cpu is passed the value of the
cpu given to -mtune. As well as setting micro-architectural features of the
-mtune cpu, this will also add the architectural features such as support
for instructions. This can result in the backend using instructions that
are supported in the -mtune cpu but not supported in the target
architecture. For example use of the v8.1-a LSE extensions with -march=v8.
This change removes the setting of -target-cpu for -mtune, the -mcpu must
be used to set -target-cpu. This has the effect of removing all non-hard
coded benefits of mtune but it does produce correct output when -mtune cpu
with a later architecture than v8 is used.
Fixes PR34625
Differential Revision: https://reviews.llvm.org/D39179
llvm-svn: 316424
This is recommit of r302775, reverted in r302777 due to a fail in
clang-tidy. Original mesage is below.
Now if clang driver is given wrong arguments, in some cases it
continues execution and returns zero code. This change fixes this
behavior.
The fix revealed some errors in clang test set.
File test/Driver/gfortran.f90 added in r118203 checks forwarding
gfortran flags to GCC. Now driver reports error on this file, because
the option -working-directory implemented in clang differs from the
option with the same name implemented in gfortran, in clang the option
requires argument, in gfortran does not.
In the file test/Driver/arm-darwin-builtin.c clang is called with
options -fbuiltin-strcat and -fbuiltin-strcpy. These option were removed
in r191435 and now clang reports error on this test.
File arm-default-build-attributes.s uses option -verify, which is not
supported by driver, it is cc1 option.
Similarly, the file split-debug.h uses options -fmodules-embed-all-files
and -fmodule-format=obj, which are not supported by driver.
Other revealed errors are mainly mistypes.
Differential Revision: https://reviews.llvm.org/D33013
llvm-svn: 303756
Now if clang driver is given wrong arguments, in some cases it
continues execution and returns zero code. This change fixes this
behavior.
The fix revealed some errors in clang test set.
File test/Driver/gfortran.f90 added in r118203 checks forwarding
gfortran flags to GCC. Now driver reports error on this file, because
the option -working-directory implemented in clang differs from the
option with the same name implemented in gfortran, in clang the option
requires argument, in gfortran does not.
In the file test/Driver/arm-darwin-builtin.c clang is called with
options -fbuiltin-strcat and -fbuiltin-strcpy. These option were removed
in r191435 and now clang reports error on this test.
File arm-default-build-attributes.s uses option -verify, which is not
supported by driver, it is cc1 option.
Similarly, the file split-debug.h uses options -fmodules-embed-all-files
and -fmodule-format=obj, which are not supported by driver.
Other revealed errors are mainly mistypes.
Differential Revision: https://reviews.llvm.org/D33013
llvm-svn: 302775
This adds the "+profile" and +noprofile" suffixes for the -march and
-mcpu options, to allow enabling or disabling the options Statistical
Profiling Extension to ARMv8.2-A.
Differential Revision: http://reviews.llvm.org/D15023
llvm-svn: 254161
This adds new values for the -march option (armv8.2a and armv8.2-a,
which are aliases of each other), and new suffixes for the -march and
-mcpu options (+fp16 and +nofp16), to allow targeting the ARMv8.2-A
architecture and it's optional half-precision floating-point extension.
Differential Revision: http://reviews.llvm.org/D15022
llvm-svn: 254160
An assertion hit has been fixed for cmdlines like
$ clang --target=arm-linux-gnueabi -mcpu=generic hello.c
Related to: http://reviews.llvm.org/rL245445
Reviewers: rengolin
Subscribers: cfe-commits
Differential Revision: http://reviews.llvm.org/D13013
llvm-svn: 248370
GCC allows case-insensitive values for -mcpu, -march and -mtune options.
This patch implements the same behaviour for the -mtune option for the AArch64 target.
Differential Revision: http://reviews.llvm.org/D10563
llvm-svn: 242663
GCC allows case-insensitive values for -mcpu, -march and -mtune options.
This patch implements the same behaviour for the -march option for the AArch64 target.
llvm-svn: 240019
GCC allows case-insensitive values for -mcpu, -march and -mtune options.
This patch implements the same behaviour for the -mcpu option for the AArch64 target.
llvm-svn: 239619
GCC allows case-insensitive values for -mcpu, -march and -mtune options.
This patch implements the same behaviour for the -mcpu option.
Patch by Gabor Ballabas.
llvm-svn: 236859
Current versions of ld64 can't cope with "aarch64" being stored. I'm fixing
that, but in the transitionary period we'll need to still emit "arm64".
rdar://problem/17783765
llvm-svn: 213852
The main subtlety here is that the Darwin tools still need to be given "-arch
arm64" rather than "-arch aarch64". Fortunately this already goes via a custom
function to handle weird edge-cases in other architectures, and it tested.
I removed a few arm64_be tests because that really isn't an interesting thing
to worry about. No-one using big-endian is also referring to the target as
arm64 (at least as far as toolchains go). Mostly they date from when arm64 was
a separate target and we *did* need a parallel name simply to test it at all.
Now aarch64_be is sufficient.
llvm-svn: 213744
1. Revert "Add default feature for CPUs on AArch64 target in Clang"
at r210625. Then, all enabled feature will by passed explicitly by
-target-feature in -cc1 option.
2. Get "-mfpu" deprecated.
3. Implement support of "-march". Usage is:
-march=armv8-a+[no]feature
For instance, "-march=armv8-a+neon+crc+nocrypto". Here "armv8-a" is
necessary, and CPU names are not acceptable. Candidate features are
fp, neon, crc and crypto. Where conflicting feature modifiers are
specified, the right-most feature is used.
4. Implement support of "-mtune". Usage is:
-march=CPU_NAME
For instance, "-march=cortex-a57". This option will ONLY get
micro-architectural feature enabled specifying to target CPU,
like "+zcm" and "+zcz" for cyclone. Any architectural features
WON'T be modified.
5. Change usage of "-mcpu" to "-mcpu=CPU_NAME+[no]feature", which is
an alias to "-march={feature of CPU_NAME}+[no]feature" and
"-mtune=CPU_NAME" together. Where this option is used in conjunction
with -march or -mtune, those options take precedence over the
appropriate part of this option.
llvm-svn: 213353
Luke Geeson