ChangeSection incorrectly registers LastEMSInfo as belonging to the previous
section, not the current section. This happens to work when changing sections
using .section, as the previous section is set to the current section before
the call to ChangeSection, but not when using .popsection.
Differential Revision: https://reviews.llvm.org/D32225
llvm-svn: 300831
The hardware div feature refers only to Thumb, but because of its name
it is tempting to use it to check for hardware division in general,
which may cause problems in ARM mode. See https://reviews.llvm.org/D32005.
This patch adds "Thumb" to its name, to make its scope clear. One
notable place where I haven't made the change is in the feature flag
(used with -mattr), which is still hwdiv. Changing it would also require
changes in a lot of tests, including clang tests, and it doesn't seem
like it's worth the effort.
Differential Revision: https://reviews.llvm.org/D32160
llvm-svn: 300827
In the assembler, we should emit build attributes based on the target
selected with command-line options. This matches the GNU assembler's
behaviour. We only do this for build attributes which describe the
hardware that is expected to be available, not the ones that describe
ABI compatibility.
This is done by moving some of the attribute emission code to
ARMTargetStreamer, so that it can be shared between the assembly and
code-generation code paths. Since the assembler only creates a
MCSubtargetInfo, not an ARMSubtarget, the code had to be changed to
check raw features, and not use the convenience functions in
ARMSubtarget.
If different attributes are later specified using the .eabi_attribute
directive, then they will take precedence, as happens when the same
.eabi_attribute is specified twice.
This must be enabled by an option, because we don't want to do this when
parsing inline assembly. The attributes would match the ones emitted at
the start of the file, so wouldn't actually change the emitted object
file, but the extra directives would be added to every inline assembly
block when emitting assembly, which we'd like to avoid.
The majority of the changes in the build-attributes.ll test are just
re-ordering the directives, because the hardware attributes are now
emitted before the ABI ones. However, I did fix one bug which I spotted:
Tag_CPU_arch_profile was not being emitted for v6M.
Differential revision: https://reviews.llvm.org/D31812
llvm-svn: 300547
A number of backends (AArch64, MIPS, ARM) have been using
MCContext::reportError to report issues such as out-of-range fixup values in
their TgtAsmBackend. This is great, but because MCContext couldn't easily be
threaded through to the adjustFixupValue helper function from its usual
callsite (applyFixup), these backends ended up adding an MCContext* argument
and adding another call to applyFixup to processFixupValue. Adding an
MCContext parameter to applyFixup makes this unnecessary, and even better -
applyFixup can take a reference to MCContext rather than a potentially null
pointer.
Differential Revision: https://reviews.llvm.org/D30264
llvm-svn: 299529
Dont emit Mapping symbols for sections that contain only data.
Summary:
Dont emit mapping symbols for sections that contain only data.
Reviewers: rengolin, weimingz, kparzysz, t.p.northover, peter.smith
Reviewed By: t.p.northover
Patched by Shankar Easwaran <shankare@codeaurora.org>
Subscribers: alekseyshl, t.p.northover, llvm-commits
Differential Revision: https://reviews.llvm.org/D30724
llvm-svn: 299392
Fixing triple format in the tests added for the branch label fix for Thumb
Targets. Also recommitting previously approved patch, see
https://reviews.llvm.org/D30943.
Reviewed by: samparker
Differential Revision: https://reviews.llvm.org/D30987
llvm-svn: 298056
Different MCInstrAnalysis classes for arm and thumb mode, each with
their own evaluateBranch implementation. I added a test case and
fixed the coff-relocations test to use '<label>:' rather than
'<label>' in the CHECK-LABEL entries, since the ones without the
colon would match branch targets. Might be worth noticing that
llvm-objdump does not lookup the relocation and thus assigns it a
target depending on the encoded immediate which #0, so it thinks it
branches to the next instruction.
Committed on behalf of Andre Vieira (avieira).
Differential Revision: https://reviews.llvm.org/D30943
llvm-svn: 297821
Make MCSectionELF::AssociatedSection be a link to a symbol, because
that's how it works in the assembly, and use it in the asm printer.
llvm-svn: 297769
When constructing global address literals while targeting the RWPI
relocation model. LLVM currently only uses literal pools. If MOVW/MOVT
instructions are available we can use these instead. Beside being more
efficient it allows -arm-execute-only to work with
-relocation-model=RWPI as well.
When we generate MOVW/MOVT for global addresses when targeting the RWPI
relocation model, we need to use base relative relocations. This patch
does the needed plumbing in MC to generate these for MOVW/MOVT.
Differential Revision: https://reviews.llvm.org/D29487
Change-Id: I446786e43a6f5aa9b6a5bb2cd216d60d41c7755d
llvm-svn: 294298
On ELF every section can have a corresponding section symbol. When in
an assembly file we have
.quad .text
the '.text' refers to that symbol.
The way we used to handle them is to leave .text an undefined symbol
until the very end when the object writer would map them to the
actual section symbol.
The problem with that is that anything before the end would see an
undefined symbol. This could result in bad diagnostics
(test/MC/AArch64/label-arithmetic-diags-elf.s), or incorrect results
when using the asm streamer (est/MC/Mips/expansion-jal-sym-pic.s).
Fixing this will also allow using the section symbol earlier for
setting sh_link of SHF_METADATA sections.
This patch includes a few hacks to avoid changing our behaviour when
handling conflicts between section symbols and other symbols. I
reported pr31850 to track that.
llvm-svn: 293936
A 64-bit relocation does not exist in 32-bit ARMELF. Report an error
instead of crashing.
PR23870
Patch by Sanne Wouda (sanwou01).
Differential Revision: https://reviews.llvm.org/D28851
llvm-svn: 292373
For example we were producing
push {r8, r10, r11, r4, r5, r7, lr}
This is misleading (r4, r5 and r7 are actually pushed before the rest), and
other components (stack folding recently) often forget to deal with the extra
complexity coming from the different order, leading to miscompiles. Finally, we
warn about our own code in -no-integrated-as mode without this, which is really
not a good idea.
Fixed usage of std::sort so that we (hopefully) use instantiations that
actually exist in GCC 4.8.
llvm-svn: 286881
For example we were producing
push {r8, r10, r11, r4, r5, r7, lr}
This is misleading (r4, r5 and r7 are actually pushed before the rest), and
other components (stack folding recently) often forget to deal with the extra
complexity coming from the different order, leading to miscompiles. Finally, we
warn about our own code in -no-integrated-as mode without this, which is really
not a good idea.
llvm-svn: 286866
The initial mapping symbol state is set from the triple, but we only checked
for the little-endian thumb triple, so could end up with an ARM mapping symbol
for big-endian thumb.
Differential Revision: https://reviews.llvm.org/D24553
llvm-svn: 281894
Its existence is largely historical, apparently we tried to make ARM object
files look maybe-almost-possibly runnable by putting our best guess at the
actual value into relocated locations. Of course, the real linker then comes
along and can completely change things.
But it should only be there for word-sized and movw/movt relocations. It can't
be encoded in branch relocations, and I've seen it mess up validity
calculations twice in the last couple of weeks so the default is clearly problematic.
llvm-svn: 279773
A branch-distance to a Thumb function shouldn't be forced to be odd for
CBZ/CBNZ instructions because (assuming it's within range), it's going to be a
valid, even offset.
llvm-svn: 279665
This is a mechanical change of comments in switches like fallthrough,
fall-through, or fall-thru to use the LLVM_FALLTHROUGH macro instead.
llvm-svn: 278902
Summary:
Fix for the upper bound check that was causing a build failure.
Reviewers: olista01, rengolin, t.p.northover
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D23501
llvm-svn: 278789
Summary:
The assembler currently does not check the branch target for CBZ/CBNZ
instructions, which only permit branching forwards with a positive offset. This
adds validation for the branch target to ensure negative PC-relative offsets are
not encoded into the instruction, whether specified as a literal or as an
assembler symbol.
Reviewers: rengolin, t.p.northover
Subscribers: llvm-commits, rengolin
Differential Revision: https://reviews.llvm.org/D23312
llvm-svn: 278788
This currently breaks the greendragon clang-stage1-configure-RA/ and
brotli. It is probably just uncovering a pre-existing problem. Reverting
temporarily to get the buildbots green again. A reduced testcase will
follow shortly.
This reverts commit r278659.
llvm-svn: 278711
Summary:
The assembler currently does not check the branch target for CBZ/CBNZ
instructions, which only permit branching forwards with a positive offset. This
adds validation for the branch target to ensure negative PC-relative offsets are
not encoded into the instruction, whether specified as a literal or as an
assembler symbol.
Reviewers: rengolin, t.p.northover
Subscribers: llvm-commits, rengolin
Differential Revision: https://reviews.llvm.org/D23312
llvm-svn: 278659
This patch adds support for some new relocation models to the ARM
backend:
* Read-only position independence (ROPI): Code and read-only data is accessed
PC-relative. The offsets between all code and RO data sections are known at
static link time. This does not affect read-write data.
* Read-write position independence (RWPI): Read-write data is accessed relative
to the static base register (r9). The offsets between all writeable data
sections are known at static link time. This does not affect read-only data.
These two modes are independent (they specify how different objects
should be addressed), so they can be used individually or together. They
are otherwise the same as the "static" relocation model, and are not
compatible with SysV-style PIC using a global offset table.
These modes are normally used by bare-metal systems or systems with
small real-time operating systems. They are designed to avoid the need
for a dynamic linker, the only initialisation required is setting r9 to
an appropriate value for RWPI code.
I have only added support to SelectionDAG, not FastISel, because
FastISel is currently disabled for bare-metal targets where these modes
would be used.
Differential Revision: https://reviews.llvm.org/D23195
llvm-svn: 278015
Currently, for ARMCOFFMCAsmInfoMicrosoft, no comment character is set, thus the
idefault, '#', is used.
The hash character doesn't work as comment character in ARM assembly, since '#'
is used for immediate values.
The comment character is set to ';', which is the comment character used by MS
armasm.exe. (The microsoft armasm.exe uses a different directive syntax than
what LLVM currently supports though, similar to ARM's armasm.)
This allows inline assembly with immediate constants to be built (and brings the
assembly output from clang -S closer to being possible to assemble).
A test is added that verifies that ';' is correctly interpreted as comments in
this mode, and verifies that assembling code that includes literal constants
with a '#' works.
Patch by Martin Storsjö.
llvm-svn: 276859
Some targets, notably AArch64 for ILP32, have different relocation encodings
based upon the ABI. This is an enabling change, so a future patch can use the
ABIName from MCTargetOptions to chose which relocations to use. Tested using
check-llvm.
The corresponding change to clang is in: http://reviews.llvm.org/D16538
Patch by: Joel Jones
Differential Revision: https://reviews.llvm.org/D16213
llvm-svn: 276654
The standard local dynamic model for TLS on ARM systems needs two
relocations:
- R_ARM_TLS_LDM32 (module idx)
- R_ARM_TLS_LDO32 (offset of object from origin of module TLS block)
In GNU style assembler we use symbol(tlsldm) and symbol(tlsldo) to
produce these relocations.
llvm-mc for ARM supports symbol(tlsldo) but does not support symbol(tlsldm).
This patch wires up the existing symbol(tlsldm) to R_ARM_TLS_LDM32.
TLS for ARM is defined in Addenda to, and Errata in, the ABI for the
ARM Architecture
Differential Revision: https://reviews.llvm.org/D22461
llvm-svn: 275977
Immediate branch targets aren't commonly used, but if they are we should make
sure they can actually be encoded. This means they must be divisible by 2 when
targeting Thumb mode, and by 4 when targeting ARM mode.
Also do a little naming cleanup while I was changing everything around anyway.
llvm-svn: 275116
The R_ARM_PLT32 relocation is deprecated and is not produced by MC.
This means that the code being deleted is dead from the .o point of
view and was making the .s more confusing.
llvm-svn: 272909
The Thumb2 conditional branch B<cond>.W has a different encoding (T3)
to the unconditional branch B.W (T4) as it needs to record <cond>.
As the encoding is different the B<cond>.W is given a different
relocation type.
ELF for the ARM Architecture 4.6.1.6 (Table-13) states that
R_ARM_THM_JUMP19 should be used for B<cond>.W. At present the
MC layer is using the R_ARM_THM_JUMP24 from B.W.
This change makes B<cond>.W use R_ARM_THM_JUMP19 and alters the
existing test that checks for R_ARM_THM_JUMP24 to expect
R_ARM_THM_JUMP19.
llvm-svn: 271997
TLS access requires an offset from the TLS index. The index itself is the
section-relative distance of the symbol. For ARM, the relevant relocation
(IMAGE_REL_ARM_SECREL) is applied as a constant. This means that the value may
not be an immediate and must be lowered into a constant pool. This offset will
not be base relocated. We were previously emitting the actual address of the
symbol which would be base relocated and would therefore be the vaue offset by
the ImageBase + TLS Offset.
llvm-svn: 271974
Having an enum member named Default is quite confusing: Is it distinct
from the others?
This patch removes that member and instead uses Optional<Reloc> in
places where we have a user input that still hasn't been maped to the
default value, which is now clear has no be one of the remaining 3
options.
llvm-svn: 269988
We'd disabled them on x86 because back in the early days some host tools
couldn't handle the new load commands. This no longer holds: anyone capable of
deploying Clang should be able to deploy its copies of ar/ranlib/etc.
rdar://25254790
llvm-svn: 267075
Removed some unused headers, replaced some headers with forward class declarations.
Found using simple scripts like this one:
clear && ack --cpp -l '#include "llvm/ADT/IndexedMap.h"' | xargs grep -L 'IndexedMap[<]' | xargs grep -n --color=auto 'IndexedMap'
Patch by Eugene Kosov <claprix@yandex.ru>
Differential Revision: http://reviews.llvm.org/D19219
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 266595
Some ARM instructions encode 32-bit immediates as a 8-bit integer (0-255)
and a 4-bit rotation (0-30, even) in its least significant 12 bits. The
original fixup, FK_Data_4, patches the instruction by the value bit-to-bit,
regardless of the encoding. For example, assuming the label L1 and L2 are
0x0 and 0x104 respectively, the following instruction:
add r0, r0, #(L2 - L1) ; expects 0x104, i.e., 260
would be assembled to the following, which adds 1 to r0, instead of 260:
e2800104 add r0, r0, #4, 2 ; equivalently 1
The new fixup kind fixup_arm_mod_imm takes care of the encoding:
e2800f41 add r0, r0, #260
Patch by Ting-Yuan Huang!
llvm-svn: 265122
John Brawn