We have a loop-rerolling optimization which can be enabled by using
-freroll-loops. While sometimes loops are hand-unrolled for performance
reasons, when optimizing for size, we should always undo this manual
optimization to produce smaller code (our optimizer's unroller will still
unroll the rerolled loops if it thinks that is a good idea).
llvm-svn: 283685
Summary:
We do this by wrapping <complex> and <algorithm>.
Tests are in the test-suite.
Reviewers: tra
Subscribers: jhen, beanz, cfe-commits, mgorny
Differential Revision: https://reviews.llvm.org/D24979
llvm-svn: 283680
Revert the -print-libgcc-file-name change as the new test fails
on Darwin. It needs to be updated to run the libgcc part only on systems
supporting that rtlib.
llvm-svn: 283586
Make the -print-libgcc-file-name option print an appropriate compiler
runtime library, that is libgcc.a if gcc runtime is used
and an appropriate compiler-rt library if that runtime is used.
The main use for this is to allow linking executables built with
-nodefaultlibs (e.g. to avoid linking to the standard C++ library) to
the compiler runtime library, e.g. using:
clang++ ... -nodefaultlibs $(clang++ ... -print-libgcc-file-name)
in which case currently a program built like this linked to the gcc
runtime unconditionally. The patch fixes it to use compiler-rt libraries
instead when compiler-rt is the active runtime.
Differential Revision: https://reviews.llvm.org/D25338
llvm-svn: 283572
Provide toolchain and tool support for Fuchsia operating system.
Fuchsia uses compiler-rt as the runtime library and libc++, libc++abi
and libunwind as the C++ standard library. lld is used as a default
linker.
Differential Revision: https://reviews.llvm.org/D25117
llvm-svn: 283420
Added the code which explicitly emits an error in Clang in case
`-fxray-instrument` is passed, but XRay is not supported for the
selected target.
Author: rSerge
Reviewers: dberris, rsmith, aaron.ballman, rnk
Subscribers: cfe-commits, iid_iunknown
Differential Revision: https://reviews.llvm.org/D24799
llvm-svn: 283193
Summary:
Also makes -fcoroutines_ts to be both a Driver and CC1 flag.
Patch mostly by EricWF.
Reviewers: rnk, cfe-commits, rsmith, EricWF
Subscribers: mehdi_amini
Differential Revision: https://reviews.llvm.org/D25130
llvm-svn: 283064
Enable soft-float support on PPC64, as the backend now supports it. Also, the
backend now uses -hard-float instead of +soft-float, so set the target features
accordingly.
Fixes PR26970.
llvm-svn: 283061
assume that ::operator new provides no more alignment than is necessary for any
primitive type, except when we're on a GNU OS, where glibc's malloc guarantees
to provide 64-bit alignment on 32-bit systems and 128-bit alignment on 64-bit
systems. This can be controlled by the command-line -fnew-alignment flag.
llvm-svn: 282974
Summary:
This patch proposes a new class to generate and record action dependences related with offloading. The builder provides three main functionalities:
- Add device dependences to host actions.
- Add host dependence to device actions.
- Register device top-level actions.
The constructor of the builder detect the programming models that should be supported, and generates a specialized builder for each. If a new programming model is to be added in the future, only a new specialized builder has to be implemented.
When the specialized builder is generated, it produces programming-model-specific diagnostics.
A CUDA specialized builder is proposed in the patch that mostly consists of the partition of the current `buildCudaAction` by the three different functionalities.
Reviewers: tra, echristo, ABataev, jlebar, hfinkel
Subscribers: Hahnfeld, whchung, guansong, jlebar, mehdi_amini, andreybokhanko, tcramer, mkuron, cfe-commits, arpith-jacob, carlo.bertolli, caomhin
Differential Revision: https://reviews.llvm.org/D18172
llvm-svn: 282865
This option behaves in a similar spirit as -save-temps and writes
internal llvm statistics in json format to a file.
Differential Revision: https://reviews.llvm.org/D24820
llvm-svn: 282426
Avoid failing in the backend when the rewrite map does not exist. Rather check
that the map exists in the frontend before handing it off to the backend. Add
the missing rewrite maps that the tests were referencing.
llvm-svn: 282379
Summary:
Currently, a linker option must be used to control the backend
parallelism of ThinLTO. The linker option varies depending on the
linker (e.g. gold vs ld64). Add a new clang option -flto-jobs=N
to control this.
I've added in the wiring to pass this to the gold plugin. I also
added in the logic to pass this down in the form I understand that
ld64 uses on MacOS, for the darwin target.
Reviewers: mehdi_amini, dexonsmith
Subscribers: mehdi_amini, cfe-commits
Differential Revision: https://reviews.llvm.org/D24826
llvm-svn: 282291
Summary:
The ASAN unittests are failing (check-asan-dynamic) due to an incorrect symbol name:
```
LINK : error LNK2001: unresolved external symbol ___asan_seh_interceptor
```
On win64, the linker is not adding an extra underscore. This was correctly fixed in the same file for other uses.
After that patch, most of the unittests are passing, but some related to SEH needs to be fixed.
```
Failing Tests (4):
AddressSanitizer-x86_64-windows-dynamic :: TestCases/Windows/dll_intercept_memchr.cc
AddressSanitizer-x86_64-windows-dynamic :: TestCases/Windows/dll_intercept_memcpy_indirect.cc
AddressSanitizer-x86_64-windows-dynamic :: TestCases/Windows/dll_seh.cc
AddressSanitizer-x86_64-windows-dynamic :: TestCases/Windows/seh.cc
Expected Passes : 339
Passes With Retry : 3
Expected Failures : 16
Unsupported Tests : 152
Unexpected Failures: 4
```
Reviewers: rnk, kcc, majnemer
Subscribers: majnemer, chrisha, cfe-commits
Differential Revision: https://reviews.llvm.org/D24841
llvm-svn: 282251
Summary:
Sanitizers aren't supported on NVPTX -- don't try to run them.
This lets you e.g. pass -fsanitize=address and get asan on your host
code.
Reviewers: kcc
Subscribers: cfe-commits, tra, jhen
Differential Revision: https://reviews.llvm.org/D24640
llvm-svn: 281680
Unfortunately we can't enable it for all N64 because it is not yet possible to
distinguish N32 from N64 from the triple on other environments.
N64 has been confirmed to produce identical (within reason) objects to GAS
during stage 2 of compiler recursion on N64-abi Fedora. Unfortunately,
Fedora's triples do not distinguish N32 from N64 so I can't enable it by
default there. I'm currently repeating this testing for Debian mips64el but
it's very unlikely to produce a different result.
Patch by: Daniel Sanders
Reviewers: sdardis
Differential Review: https://reviews.llvm.org/D22679
llvm-svn: 281610
Original commit message:
Add -fdiagnostics-show-hotness
Summary:
I've recently added the ability for optimization remarks to include the
hotness of the corresponding code region. This uses PGO and allows
filtering of the optimization remarks by relevance. The idea was first
discussed here:
http://thread.gmane.org/gmane.comp.compilers.llvm.devel/98334
The general goal is to produce a YAML file with the remarks. Then, an
external tool could dynamically filter these by hotness and perhaps by
other things.
That said it makes sense to also expose this at the more basic level
where we just include the hotness info with each optimization remark.
For example, in D22694, the clang flag was pretty useful to measure the
overhead of the additional analyses required to include hotness.
(Without the flag we don't even run the analyses.)
For the record, Hal has already expressed support for the idea of this
patch on IRC.
Differential Revision: https://reviews.llvm.org/D23284
llvm-svn: 281293
Summary:
I've recently added the ability for optimization remarks to include the
hotness of the corresponding code region. This uses PGO and allows
filtering of the optimization remarks by relevance. The idea was first
discussed here:
http://thread.gmane.org/gmane.comp.compilers.llvm.devel/98334
The general goal is to produce a YAML file with the remarks. Then, an
external tool could dynamically filter these by hotness and perhaps by
other things.
That said it makes sense to also expose this at the more basic level
where we just include the hotness info with each optimization remark.
For example, in D22694, the clang flag was pretty useful to measure the
overhead of the additional analyses required to include hotness.
(Without the flag we don't even run the analyses.)
For the record, Hal has already expressed support for the idea of this
patch on IRC.
Differential Revision: https://reviews.llvm.org/D23284
llvm-svn: 281276
-fprofile-dir=path allows the user to specify where .gcda files should be
emitted when the program is run. In particular, this is the first flag that
causes the .gcno and .o files to have different paths, LLVM is extended to
support this. -fprofile-dir= does not change the file name in the .gcno (and
thus where lcov looks for the source) but it does change the name in the .gcda
(and thus where the runtime library writes the .gcda file). It's different from
a GCOV_PREFIX because a user can observe that the GCOV_PREFIX_STRIP will strip
paths off of -fprofile-dir= but not off of a supplied GCOV_PREFIX.
To implement this we split -coverage-file into -coverage-data-file and
-coverage-notes-file to specify the two different names. The !llvm.gcov
metadata node grows from a 2-element form {string coverage-file, node dbg.cu}
to 3-elements, {string coverage-notes-file, string coverage-data-file, node
dbg.cu}. In the 3-element form, the file name is already "mangled" with
.gcno/.gcda suffixes, while the 2-element form left that to the middle end
pass.
llvm-svn: 280306
I tested the cases involving split-dwarf + gmlt +
no-split-dwarf-inlining, but didn't verify the simpler case without
gmlt.
The logic is, admittedly, a little hairy, but seems about as simple as I
could wrangle it.
llvm-svn: 280290
On Windows, static libraries are named lib<name>.lib while import libraries are
named <name>.lib. Use the appropriate naming on itanium and msvc environments.
This is setup properly so that if a dynamic builtins is used on Windows, it
would do the right thing, although this is not currently wired through the
driver (i.e. there is no equivalent to -{shared,static}-gcc).
llvm-svn: 280169
r280133. Original commit message:
C++ Modules TS: driver support for building modules.
This works as follows: we add --precompile to the existing gamut of options for
specifying how far to go when compiling an input (-E, -c, -S, etc.). This flag
specifies that an input is taken to the precompilation step and no further, and
this can be specified when building a .pcm from a module interface or when
building a .pch from a header file.
The .cppm extension (and some related extensions) are implicitly recognized as
C++ module interface files. If --precompile is /not/ specified, the file is
compiled (via a .pcm) to a .o file containing the code for the module (and then
potentially also assembled and linked, if -S, -c, etc. are not specified). We
do not yet suppress the emission of object code for other users of the module
interface, so for now this will only work if everything in the .cppm file has
vague linkage.
As with the existing support for module-map modules, prebuilt modules can be
provided as compiler inputs either via the -fmodule-file= command-line argument
or via files named ModuleName.pcm in one of the directories specified via
-fprebuilt-module-path=.
This also exposes the -fmodules-ts cc1 flag in the driver. This is still
experimental, and in particular, the concrete syntax is subject to change as
the Modules TS evolves in the C++ committee. Unlike -fmodules, this flag does
not enable support for implicitly loading module maps nor building modules via
the module cache, but those features can be turned on separately and used in
conjunction with the Modules TS support.
llvm-svn: 280134
to CC1, which are translated to function attributes and can e.g. be mapped on
build attributes FP_exceptions and FP_denormal. Setting these build attributes
allows better selection of floating point libraries.
Differential Revision: https://reviews.llvm.org/D23840
llvm-svn: 280064
Hal Finkel