The guaranteed no-wrap region is never empty, it always contains at
least zero, so these optimizations don't ever apply.
To make this more obviously true, replace the conversative return
in makeGNWR with an assertion.
llvm-svn: 361698
The test based on PR42010:
https://bugs.llvm.org/show_bug.cgi?id=42010
...may show an inaccuracy for PPC's target defs, but we should not
be so aggressive with an assert here. There's no telling what out-of-tree
targets look like.
llvm-svn: 361696
In LVI, calculate the range of extractvalue(op.with.overflow(%x, %y), 0)
as the range of op(%x, %y). This is mainly useful in conjunction with
D60650: If the result of the operation is extracted in a branch guarded
against overflow, then the value of %x will be appropriately constrained
and the result range of the operation will be calculated taking that
into account.
Differential Revision: https://reviews.llvm.org/D60656
llvm-svn: 361693
INC/DEC is really a special case of a more generic issue. We should also turn leas into add reg/reg or add reg/imm regardless of the slow lea flags.
This also supports LEA64_32 which has 64 bit input registers and 32 bit output registers. So we need to convert the 64 bit inputs to their 32 bit equivalents to check if they are equal to base reg.
One thing to note, the original code preserved the kill flags by adding operands to the new instruction instead of using addReg. But I think tied operands aren't supposed to have the kill flag set. I dropped the kill flags, but I could probably try to preserve it in the add reg/reg case if we think its important. Not sure which operand its supposed to go on for the LEA64_32r instruction due to the super reg implicit uses. Though I'm also not sure those are needed since they were probably just created by an INSERT_SUBREG from a 32-bit input.
Differential Revision: https://reviews.llvm.org/D61472
llvm-svn: 361691
This copies the Sandy Bridge zero idiom support to later CPUs. Adding the AVX2 and AVX512F/VL instructions as appropriate.
Differential Revision: https://reviews.llvm.org/D62360
llvm-svn: 361690
This reverts commit r361340. The following builder has been broken for
the past few days because of this commit:
http://green.lab.llvm.org/green/job/clang-stage2-cmake-RgSan/
Also revert r361399, which was committed to fix r361340.
llvm-svn: 361685
This lead to errors when dumping binaries with v4 and v5 units linked
together (but could've also errored on v5 units that did/didn't use
str_offsets).
Also improves error handling and messages around invalid str_offsets
contributions.
llvm-svn: 361683
In a few places in getInstrMapping, we check if use/def instructions for the
instruction we're mapping have floating point constraints.
We can improve this check and reduce the number of copies in GISel-compiled code
if we make a couple observations:
- For a def instruction, it only matters if the def instruction must always
output a value stored on a FPR
- For a use instruction, it only matters if the use instruction must always
only take in values stored in FPRs
This adds two new functions:
- onlyUsesFP
- onlyDefinesFP
Then we can use those when we're checking the uses/defs instead.
Without this patch, the load, unmerge, store, and select in the added test
would have unnecessary copies.
Differential Revision: https://reviews.llvm.org/D62426
llvm-svn: 361679
Factor it out into a function, and replace places where we had the same check
with the new function.
Differential Revision: https://reviews.llvm.org/D62421
llvm-svn: 361677
This adds `-parent-recurse-depth` which limits the number of parent DIEs
being dumped.
Differential revision: https://reviews.llvm.org/D62359
llvm-svn: 361671
Summary:dd
This patch implements call lowering for calls without parameters
on AIX as initial support.
Reviewers: sfertile, hubert.reinterpretcast, aheejin, efriedma
Differential Revision: https://reviews.llvm.org/D61948
llvm-svn: 361669
The fcsel and csel instructions differ in only the register banks they work on.
So, they're entirely interchangeable otherwise.
With this in mind, this does two things:
- Teach AArch64RegisterBankInfo to consider the inputs to G_SELECT as well as
the outputs.
- Teach it to choose the best register bank mapping based off the constraints
of the inputs and outputs.
The "best" in this case means the one that requires the smallest number of
copies to properly emit a fcsel/csel.
For example, if the inputs are all already going to be on FPRs, we should
emit a fcsel, even if the output is a GPR. This costs one copy to produce the
result, but saves us from copying the inputs into GPRs.
Also update the regbank-select.mir to check that we end up with the right
select instruction.
Differential Revision: https://reviews.llvm.org/D62267
llvm-svn: 361665
Summary:
It looks like since INLINEASM_BR was created off of INLINEASM, a few
checks for INLINEASM needed to be updated to check for either case.
pr/41999
Reviewers: t.p.northover, peter.smith
Reviewed By: peter.smith
Subscribers: craig.topper, javed.absar, kristof.beyls, hiraditya, llvm-commits, peter.smith, srhines
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62402
llvm-svn: 361661
Summary:
We were observing failures for arm32 allyesconfigs of the Linux kernel
with the asm goto Clang patch, where ldr's were being generated to
offsets too far away to encode in imm12.
It looks like since INLINEASM_BR was created off of INLINEASM, a few
checks for INLINEASM needed to be updated to check for either case.
pr/41999
Link: https://github.com/ClangBuiltLinux/linux/issues/490
Reviewers: peter.smith, kristof.beyls, ostannard, rengolin, t.p.northover
Reviewed By: peter.smith
Subscribers: jyu2, javed.absar, hiraditya, llvm-commits, nathanchance, craig.topper, kees, srhines
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62400
llvm-svn: 361659
This was skipping GetUnderlyingObject for nonprivate addresses, but an
alloca could also be found through an addrspacecast if it's flat.
llvm-svn: 361649
This is a regression test for vectorization, so remove instcombine
from the RUN line and adjust the comparison predicates to show what
the vectorizer is creating rather than how instcombine cleans it up.
llvm-svn: 361648
This resolves two issues:
(1) LIBCXX_HEADER_DIR is a very misleadingly named variable because it shouldn't be set to the header directory, instead it needs to be the root binary dir.
(2) If you build runtimes without libcxx, we can't depend on the libcxx header target, so we should instaed refer to it by the variable name which will be unset if libcxx isn't present.
llvm-svn: 361646
Details: To make instruction selection really divergence driven it is necessary to assign
the correct register classes to the cross block values beforehand. For the divergent targets
same value type requires different register classes dependent on the value divergence.
Reviewers: rampitec, nhaehnle
Differential Revision: https://reviews.llvm.org/D59990
llvm-svn: 361644
GNU readelf tool prints slightly different dynamic table "header" and
surrounds dynamic tag names by brackets. This patch implements the same
formatting for GNU-style output of the `llvm-readobj`.
LLVM
```
DynamicSection [ (13 entries)
Tag Type Name/Value
0x00000006 SYMTAB 0x168
...
]
```
GNU
```
Dynamic section at offset 0x1d0 contains 13 entries:
Tag Type Name/Value
0x00000006 (SYMTAB) 0x168
...
```
Differential Revision: https://reviews.llvm.org/D62256
llvm-svn: 361633
For the situation, where we generate the following code:
crxor 8, 8, 8
< Some instructions>
.LBB0_1:
< Some instructions>
cror 1, 8, 8
cror (COPY of CRbit) depends on the result of the crxor instruction.
CR8 is known to be zero as crxor is equivalent to CRUNSET. We can simply use
crxor 1, 1, 1 instead to zero out CR1, which does not have any dependency on
any previous instruction.
This patch will optimize it to:
< Some instructions>
.LBB0_1:
< Some instructions>
cror 1, 1, 1
Patch By: Victor Huang (NeHuang)
Differential Revision: https://reviews.llvm.org/D62044
llvm-svn: 361632
It is now possible after D61937 was landed and was discussed
in it's review comments. It is not consistent with GNU, which
does not output .dynamic section content in this case for
no visible reason.
Differential revision: https://reviews.llvm.org/D62179
llvm-svn: 361630
r361479 added tests that did --implicit-check-not=main, but a user found
that they failed on his machine, due to it having 'main' in a file path
printed earlier in the output. This test fixes this issue by making the
check pattern more explicit.
llvm-svn: 361621
This patch adds the overridable TargetLowering::getTargetConstantFromLoad function which allows targets to return any constant value loaded by a LoadSDNode node - only X86 makes use of this so far but everything should be in place for other targets.
computeKnownBits then uses this function to improve codegen, notably vector code after legalization.
A future commit will do the same for ComputeNumSignBits but computeKnownBits sees the bigger benefit.
This required a couple of fixes:
* SimplifyDemandedBits must early-out for getTargetConstantFromLoad cases to prevent infinite loops of constant regeneration (similar to what we already do for BUILD_VECTOR).
* Fix a DAGCombiner::visitTRUNCATE issue as we had trunc(shl(v8i32),v8i16) <-> shl(trunc(v8i16),v8i32) infinite loops after legalization on AVX512 targets.
Differential Revision: https://reviews.llvm.org/D61887
llvm-svn: 361620
Summary:
This patch adds support for the polynomial multiplication instructions
PMULLB/PMULLT. The 64-bit source and 128-bit destination element
variants are enabled with crypto extensions (+sve2-aes), similar to the
NEON PMULL2 instruction. All other variants are enabled with +sve2.
The specification can be found here:
https://developer.arm.com/docs/ddi0602/latest
Reviewed By: SjoerdMeijer
Differential Revision: https://reviews.llvm.org/D62145
llvm-svn: 361619
Just a minor refactoring to use the new helper method
DataLayout::typeSizeEqualsStoreSize(). This is done when
checking if getTypeSizeInBits is equal/non-equal to
getTypeStoreSizeInBits.
llvm-svn: 361613
Summary:
This patch adds support for the SVE2 saturating/rounding bitwise shift
left (predicated) group of instructions:
* SRSHL, URSHL, SRSHLR, URSHLR, SQSHL, UQSHL, SQRSHL, UQRSHL,
SQSHLR, UQSHLR, SQRSHLR, UQRSHLR
Immediate forms of the SQSHL and UQSHL instructions are also added to
the existing SVE bitwise shift by immediate (predicated) group, as well
as three new instructions SRSHR/URSHR/SQSHLU. The new instructions in
this group are encoded similarly and are implemented using the same
TableGen class with a minimal change (1 bit in encoding).
The specification can be found here:
https://developer.arm.com/docs/ddi0602/latest
Reviewed By: SjoerdMeijer
Differential Revision: https://reviews.llvm.org/D62140
llvm-svn: 361612
This change relaxes the checks for hasOnlyUniformBranches such that our
region is uniform if:
1. All conditional branches that are direct children are uniform.
2. And either:
a. All sub-regions are uniform.
b. There is one or less conditional branches among the direct
children.
Differential Revision: https://reviews.llvm.org/D62198
llvm-svn: 361610
Summary:
Bit 20 in sve2_int_arith_pred TableGen class was overlapping. The
encodings are not affected as bit 20 is defined by the opc bits
and this was overwriting the earlier error of setting bit 20 to 0.
Raised by Momchil: https://reviews.llvm.org/D62130
Reviewed By: chill
Differential Revision: https://reviews.llvm.org/D62292
llvm-svn: 361609
swifterror marks an argument as a register pretending to be a pointer, so we
need a guaranteed mem2reg-like analysis of its uses. Fortunately most of the
infrastructure can be reused from the DAG world.
llvm-svn: 361608
Nikita Popov