OpenMP 4.1 allows to use variables with reference types in all private clauses (private, firstprivate, lastprivate, linear etc.). Patch allows to use such variables and fixes codegen for linear variables with reference types.
llvm-svn: 245268
blender uses statements expression in condition of the loop under control of the '#pragma omp parallel for'. This condition is used several times in different expressions required for codegen of the loop directive. If there are some variables defined in statement expression, it fires an assert during codegen because of redefinition of the same variables.
We have to rebuild several expression to be sure that all variables are unique.
llvm-svn: 245041
Summary:
float_cast_overflow is the only UBSan check without a source location attached.
This patch propagates SourceLocations where necessary to get them to the
EmitCheck() call.
Reviewers: rsmith, ABataev, rjmccall
Subscribers: cfe-commits
Differential Revision: http://reviews.llvm.org/D11757
llvm-svn: 244568
OpenMP 4.1 allows to use variables with reference types in private clauses and, therefore, in init expressions of the cannonical loop forms.
llvm-svn: 244209
The next code is generated for this construct:
```
if (__kmpc_cancellationpoint(ident_t *loc, kmp_int32 global_tid, kmp_int32 cncl_kind) != 0)
<exit from outer innermost construct>;
```
llvm-svn: 241239
If task directive has associated 'depend' clause then function kmp_int32 __kmpc_omp_task_with_deps ( ident_t *loc_ref, kmp_int32 gtid, kmp_task_t * new_task, kmp_int32 ndeps, kmp_depend_info_t *dep_list,kmp_int32 ndeps_noalias, kmp_depend_info_t *noalias_dep_list) must be called instead of __kmpc_omp_task().
If this directive has associated 'if' clause then also before a call of kmpc_omp_task_begin_if0() a function void __kmpc_omp_wait_deps ( ident_t *loc_ref, kmp_int32 gtid, kmp_int32 ndeps, kmp_depend_info_t *dep_list, kmp_int32 ndeps_noalias, kmp_depend_info_t *noalias_dep_list) must be called.
Array sections are not supported yet.
llvm-svn: 240532
Parsing and sema analysis (without support for array sections in arguments) for 'depend' clause (used in 'task' directive, OpenMP 4.0).
llvm-svn: 240409
Added parsing, sema analysis and codegen for '#pragma omp taskgroup' directive (OpenMP 4.0).
The code for directive is generated the following way:
#pragma omp taskgroup
<body>
void __kmpc_taskgroup(<loc>, thread_id);
<body>
void __kmpc_end_taskgroup(<loc>, thread_id);
llvm-svn: 240011
Added codegen for combined 'omp for simd' directives, that is a combination of 'omp for' directive followed by 'omp simd' directive. Includes support for all clauses.
llvm-svn: 239990
The following code is generated for reduction clause within 'omp simd' loop construct:
#pragma omp simd reduction(op:var)
for (...)
<body>
alloca priv_var
priv_var = <initial reduction value>;
<loop_start>:
<body> // references to original 'var' are replaced by 'priv_var'
<loop_end>:
var op= priv_var;
llvm-svn: 239881
Previously the last iteration for simd loop-based OpenMP constructs were generated as a separate code. This feature is not required and codegen is simplified.
llvm-svn: 239810
If loop control variable in a worksharing construct is marked as lastprivate, we should copy last calculated value of private counter back to original variable.
llvm-svn: 237879
This modification generates proper copyin/initialization sequences for array variables/parameters. Before they were considered as pointers, not arrays.
llvm-svn: 237691
'schedule' clause for combined directives requires additional processing. Special helper variable is generated, that is captured in the outlined parallel region for 'parallel for' region. This captured variable is used to store chunk expression from the 'schedule' clause in this 'parallel for' region.
llvm-svn: 237100
Inner bodies of OpenMP worksharing loop-based constructs with dynamic or guided scheduling are allowed to be marked with !llvm.mem.parallel_loop_access metadata for better optimization. Worksharing constructs with static scheduling cannot be marked this way (according to OpenMP standard "A data dependence between the same logical iterations in two such loops is guaranteed").
Constructs with auto and runtime scheduling are also not marked because automatically chosen scheduling may be static also.
Differential Revision: http://reviews.llvm.org/D9518
llvm-svn: 236693
For tasks codegen for private/firstprivate variables are different rather than for other directives.
1. Build an internal structure of privates for each private variable:
struct .kmp_privates_t. {
Ty1 var1;
...
Tyn varn;
};
2. Add a new field to kmp_task_t type with list of privates.
struct kmp_task_t {
void * shareds;
kmp_routine_entry_t routine;
kmp_int32 part_id;
kmp_routine_entry_t destructors;
.kmp_privates_t. privates;
};
3. Create a function with destructors calls for all privates after end of task region.
kmp_int32 .omp_task_destructor.(kmp_int32 gtid, kmp_task_t *tt) {
~Destructor(&tt->privates.var1);
...
~Destructor(&tt->privates.varn);
return 0;
}
4. Perform initialization of all firstprivate fields (by simple copying for POD data, copy constructor calls for classes) + provide address of a destructor function after kmpc_omp_task_alloc() and before kmpc_omp_task() calls.
kmp_task_t *new_task = __kmpc_omp_task_alloc(ident_t *, kmp_int32 gtid, kmp_int32 flags, size_t sizeof_kmp_task_t, size_t sizeof_shareds, kmp_routine_entry_t *task_entry);
CopyConstructor(new_task->privates.var1, *new_task->shareds.var1_ref);
new_task->shareds.var1_ref = &new_task->privates.var1;
...
CopyConstructor(new_task->privates.varn, *new_task->shareds.varn_ref);
new_task->shareds.varn_ref = &new_task->privates.varn;
new_task->destructors = .omp_task_destructor.;
kmp_int32 __kmpc_omp_task(ident_t *, kmp_int32 gtid, kmp_task_t *new_task)
Differential Revision: http://reviews.llvm.org/D9370
llvm-svn: 236479
For tasks codegen for private/firstprivate variables are different rather than for other directives.
1. Build an internal structure of privates for each private variable:
struct .kmp_privates_t. {
Ty1 var1;
...
Tyn varn;
};
2. Add a new field to kmp_task_t type with list of privates.
struct kmp_task_t {
void * shareds;
kmp_routine_entry_t routine;
kmp_int32 part_id;
kmp_routine_entry_t destructors;
.kmp_privates_t. privates;
};
3. Create a function with destructors calls for all privates after end of task region.
kmp_int32 .omp_task_destructor.(kmp_int32 gtid, kmp_task_t *tt) {
~Destructor(&tt->privates.var1);
...
~Destructor(&tt->privates.varn);
return 0;
}
4. Perform default initialization of all private fields (no initialization for POD data, default constructor calls for classes) + provide address of a destructor function after kmpc_omp_task_alloc() and before kmpc_omp_task() calls.
kmp_task_t *new_task = __kmpc_omp_task_alloc(ident_t *, kmp_int32 gtid, kmp_int32 flags, size_t sizeof_kmp_task_t, size_t sizeof_shareds, kmp_routine_entry_t *task_entry);
DefaultConstructor(new_task->privates.var1);
new_task->shareds.var1_ref = &new_task->privates.var1;
...
DefaultConstructor(new_task->privates.varn);
new_task->shareds.varn_ref = &new_task->privates.varn;
new_task->destructors = .omp_task_destructor.;
kmp_int32 __kmpc_omp_task(ident_t *, kmp_int32 gtid, kmp_task_t *new_task)
Differential Revision: http://reviews.llvm.org/D9322
llvm-svn: 236207
Emit the following code for 'taskwait' directive within tied task:
call i32 @__kmpc_omp_taskwait(<loc>, i32 <thread_id>);
Differential Revision: http://reviews.llvm.org/D9245
llvm-svn: 235836
Emit a code for reduction clause. Next code should be emitted for reductions:
static kmp_critical_name lock = { 0 };
void reduce_func(void *lhs[<n>], void *rhs[<n>]) {
*(Type0*)lhs[0] = ReductionOperation0(*(Type0*)lhs[0], *(Type0*)rhs[0]);
...
*(Type<n>-1*)lhs[<n>-1] =
ReductionOperation<n>-1(*(Type<n>-1*)lhs[<n>-1],
*(Type<n>-1*)rhs[<n>-1]);
}
...
void *RedList[<n>] = {&<RHSExprs>[0], ..., &<RHSExprs>[<n>-1]};
switch (__kmpc_reduce{_nowait}(<loc>, <gtid>, <n>, sizeof(RedList), RedList, reduce_func, &<lock>)) {
case 1:
<LHSExprs>[0] = ReductionOperation0(*<LHSExprs>[0], *<RHSExprs>[0]);
...
<LHSExprs>[<n>-1] = ReductionOperation<n>-1(*<LHSExprs>[<n>-1], *<RHSExprs>[<n>-1]);
__kmpc_end_reduce{_nowait}(<loc>, <gtid>, &<lock>);
break;
case 2:
Atomic(<LHSExprs>[0] = ReductionOperation0(*<LHSExprs>[0], *<RHSExprs>[0]));
...
Atomic(<LHSExprs>[<n>-1] = ReductionOperation<n>-1(*<LHSExprs>[<n>-1], *<RHSExprs>[<n>-1]));
break;
default:;
}
Reduction variables are a kind of a private variables, they have private copies, but initial values are chosen in accordance with the reduction operation.
If sections directive has only single section, then original shared variables are used instead with barrier at the end of the directive.
Differential Revision: http://reviews.llvm.org/D9242
llvm-svn: 235835
#pragma omp sections lastprivate(<var>)
<BODY>;
This construct is translated into something like:
<last_iter> = alloca i32
<init for lastprivates>;
<last_iter> = 0
; No initializer for simple variables or a default constructor is called for objects.
; For arrays perform element by element initialization by the call of the default constructor.
...
OMP_FOR_START(...,<last_iter>, ..); sets <last_iter> to 1 if this is the last iteration.
<BODY>
...
OMP_FOR_END
if (<last_iter> != 0) {
<final copy for lastprivate>; Update original variable with the lastprivate value.
}
call __kmpc_cancel_barrier() ; an implicit barrier to avoid possible data race.
If there is only one section, there is no special code generation, original shared variables are used + barrier is emitted at the end of the directive.
Differential Revision: http://reviews.llvm.org/D9240
llvm-svn: 235834
If there are 2 or more sections in a 'section' directive the following code is generated:
<default init for privates>
@__kmpc_for_static_init_4();
<BODY for sections directive>
@__kmpc_for_static_fini()
If there is only one section, the following code is generated:
if (@__kmpc_single()) {
<default init for privates>
@__kmpc_end_single();
}
Differential Revision: http://reviews.llvm.org/D9239
llvm-svn: 235833
Emit the following code for 'single' directive with 'private' clause:
if (@__kmpc_single()) {
<default init for privates>
@__kmpc_end_single();
}
Differential Revision: http://reviews.llvm.org/D9238
llvm-svn: 235832
Emit the following code for 'single' directive with 'firtstprivate' clause:
if (@__kmpc_single()) {
<init for firstprivates>
@__kmpc_end_single();
}
@__kmpc_cancel_barrier(); // To avoid data race in firstprivate init
Differential Revision: http://reviews.llvm.org/D9223
llvm-svn: 235694
Runtime function for 'copyprivate' directive generates implicit barriers, so no need to emit it.
Differential Revision: http://reviews.llvm.org/D9215
llvm-svn: 235692
If there are 2 or more sections in a 'section' directive the following code is generated:
<init for firstprivates>
@__kmpc_cancel_barrier();// To avoid data race in firstprivate init
@__kmpc_for_static_init_4();
<BODY for sections directive>
@__kmpc_for_static_fini()
If there is only one section, the following code is generated:
if (@__kmpc_single()) {
<init for firstprivates>
@__kmpc_end_single();
}
@__kmpc_cancel_barrier(); // To avoid data race in firstprivate init
Differential Revision: http://reviews.llvm.org/D9214
llvm-svn: 235691
The RegionCounter type does a lot of legwork, but most of it is only
meaningful within the implementation of CodeGenPGO. The uses elsewhere
in CodeGen generally just want to increment or read counters, so do
that directly.
llvm-svn: 235664
Adds codegen for 'atomic capture' constructs with the following forms of expressions/statements:
v = x binop= expr;
v = x++;
v = ++x;
v = x--;
v = --x;
v = x = x binop expr;
v = x = expr binop x;
{v = x; x = binop= expr;}
{v = x; x++;}
{v = x; ++x;}
{v = x; x--;}
{v = x; --x;}
{x = x binop expr; v = x;}
{x binop= expr; v = x;}
{x++; v = x;}
{++x; v = x;}
{x--; v = x;}
{--x; v = x;}
{x = x binop expr; v = x;}
{x = expr binop x; v = x;}
{v = x; x = expr;}
If x and expr are integer and binop is associative or x is a LHS in a RHS of the assignment expression, and atomics are allowed for type of x on the target platform atomicrmw instruction is emitted.
Otherwise compare-and-swap sequence is emitted.
Update of 'v' is not required to be be atomic with respect to the read or write of the 'x'.
bb:
...
atomic load <x>
cont:
<expected> = phi [ <x>, label %bb ], [ <new_failed>, %cont ]
<desired> = <expected> binop <expr>
<res> = cmpxchg atomic &<x>, desired, expected
<new_failed> = <res>.field1;
br <res>field2, label %exit, label %cont
exit:
atomic store <old/new x>, <v>
...
Differential Revision: http://reviews.llvm.org/D9049
llvm-svn: 235573
If condition evaluates to true, the code executes task by calling @__kmpc_omp_task() runtime function.
If condition evaluates to false, the code executes serial version of the code by executing the following code:
call void @__kmpc_omp_task_begin_if0(<loc>, <threadid>, <task_t_ptr, returned by @__kmpc_omp_task_alloc()>);
proxy_task_entry(<gtid>, <task_t_ptr, returned by @__kmpc_omp_task_alloc()>);
call void @__kmpc_omp_task_complete_if0(<loc>, <threadid>, <task_t_ptr, returned by @__kmpc_omp_task_alloc()>);
Also it checks if the condition is constant and if it is constant it evaluates its value and then generates either parallel version of the code (if the condition evaluates to true), or the serial version of the code (if the condition evaluates to false).
Differential Revision: http://reviews.llvm.org/D9143
llvm-svn: 235507
This patch generates helper variables which used as a private copies of the corresponding original variables inside an OpenMP 'for' directive. These generated variables are initialized by default (with the default constructor, if any). In OpenMP region references to original variables are replaced by the references to these private helper variables.
Differential Revision: http://reviews.llvm.org/D9106
llvm-svn: 235503
Patch fixes bugs in codegen for loops with unsigned counters and zero trip count. Previously preconditions for all loops were built using logic (Upper - Lower) > 0. But if the loop is a loop with zero trip count, then Upper - Lower is < 0 only for signed integer, for unsigned we're running into an underflow situation.
In this patch we're using original Lower<Upper condition to check that loop body can be executed at least once. Also this allows to skip code generation for loops, if it is known that preconditions for the loop are always false.
Differential Revision: http://reviews.llvm.org/D9103
llvm-svn: 235500
Add codegen for 'ordered' directive:
__kmpc_ordered(ident_t *, gtid);
<associated statement>;
__kmpc_end_ordered(ident_t *, gtid);
Also for 'for' directives with the dynamic scheduling and an 'ordered' clause added a call to '__kmpc_dispatch_fini_(4|8)[u]()' function after increment expression for loop control variable:
while(__kmpc_dispatch_next(&LB, &UB)) {
idx = LB;
while (idx <= UB) { BODY; ++idx;
__kmpc_dispatch_fini_(4|8)[u](); // For ordered loops only.
} // inner loop
}
Differential Revision: http://reviews.llvm.org/D9070
llvm-svn: 235496
Emits the following code for the clause at the beginning of the outlined function for implicit threads:
if (<not a master thread>) {
...
<thread local copy of var> = <master thread local copy of var>;
...
}
<sync point>;
Checking for a non-master thread is performed by comparing of the address of the thread local variable with the address of the master's variable. Master thread always uses original variables, so you always know the address of the variable in the master thread.
Differential Revision: http://reviews.llvm.org/D9026
llvm-svn: 235075
#pragma omp for lastprivate(<var>)
for (i = a; i < b; ++b)
<BODY>;
This construct is translated into something like:
<last_iter> = alloca i32
<lastprivate_var> = alloca <type>
<last_iter> = 0
; No initializer for simple variables or a default constructor is called for objects.
; For arrays perform element by element initialization by the call of the default constructor.
...
OMP_FOR_START(...,<last_iter>, ..); sets <last_iter> to 1 if this is the last iteration.
<BODY>
...
OMP_FOR_END
if (<last_iter> != 0) {
<var> = <lastprivate_var> ; Update original variable with the lastprivate value.
}
call __kmpc_cancel_barrier() ; an implicit barrier to avoid possible data race.
Differential Revision: http://reviews.llvm.org/D8658
llvm-svn: 235074
Adds proper codegen for 'firstprivate' clause in for directive. Initially codegen for 'firstprivate' clause was implemented for 'parallel' directive only.
Also this patch emits sync point only after initialization of firstprivate variables, not all private variables. This sync point is not required for privates, lastprivates etc., only for initialization of firstprivate variables.
Differential Revision: http://reviews.llvm.org/D8660
llvm-svn: 234978
Fixed a bug with codegen of variables with array types specified in 'copyprivate' clause of 'single' directive.
Differential Revision: http://reviews.llvm.org/D8914
llvm-svn: 234856
Adds atomic update codegen for the following forms of expressions:
x binop= expr;
x++;
++x;
x--;
--x;
x = x binop expr;
x = expr binop x;
If x and expr are integer and binop is associative or x is a LHS in a RHS of the assignment expression, and atomics are allowed for type of x on the target platform atomicrmw instruction is emitted.
Otherwise compare-and-swap sequence is emitted:
bb:
...
atomic load <x>
cont:
<expected> = phi [ <x>, label %bb ], [ <new_failed>, %cont ]
<desired> = <expected> binop <expr>
<res> = cmpxchg atomic &<x>, desired, expected
<new_failed> = <res>.field1;
br <res>field2, label %exit, label %cont
exit:
...
Differential Revision: http://reviews.llvm.org/D8536
llvm-svn: 233513
Replace boolean IsExplicit parameter of OpenMPRuntime::emitBarrierCall() method by OpenMPDirectiveKind Kind for better compatibility with the runtime library. Also add processing of 'nowait' clause on worksharing directives.
Differential Revision: http://reviews.llvm.org/D8659
llvm-svn: 233511
If there is at least one 'copyprivate' clause is associated with the single directive, the following code is generated:
```
i32 did_it = 0; \\ for 'copyprivate' clause
if(__kmpc_single(ident_t *, gtid)) {
SingleOpGen();
__kmpc_end_single(ident_t *, gtid);
did_it = 1; \\ for 'copyprivate' clause
}
<copyprivate_list>[0] = &var0;
...
<copyprivate_list>[n] = &varn;
call __kmpc_copyprivate(ident_t *, gtid, <copyprivate_list_size>,
<copyprivate_list>, <copy_func>, did_it);
...
void<copy_func>(void *LHSArg, void *RHSArg) {
Dst = (void * [n])(LHSArg);
Src = (void * [n])(RHSArg);
Dst[0] = Src[0];
... Dst[n] = Src[n];
}
```
All list items from all 'copyprivate' clauses are gathered into single <copyprivate list> (<copyprivate_list_size> is a size in bytes of this list) and <copy_func> is used to propagate values of private or threadprivate variables from the 'single' region to other implicit threads from outer 'parallel' region.
Differential Revision: http://reviews.llvm.org/D8410
llvm-svn: 232932
The linear variable is privatized (similar to 'private') and its
value on current iteration is calculated, similar to the loop
counter variables.
Differential revision: http://reviews.llvm.org/D8375
llvm-svn: 232890
This patch allows using of ExprWithCleanups expressions and other complex expressions in 'omp atomic' construct
Differential Revision: http://reviews.llvm.org/D8200
llvm-svn: 231905
The task region is emmitted in several steps:
Emit a call to kmp_task_t *__kmpc_omp_task_alloc(ident_t *, kmp_int32 gtid, kmp_int32 flags, size_t sizeof_kmp_task_t, size_t sizeof_shareds, kmp_routine_entry_t *task_entry).
Here task_entry is a pointer to the function:
kmp_int32 .omp_task_entry.(kmp_int32 gtid, kmp_task_t *tt) {
TaskFunction(gtid, tt->part_id, tt->shareds);
return 0;
}
Copy a list of shared variables to field shareds of the resulting structure kmp_task_t returned by the previous call (if any).
Copy a pointer to destructions function to field destructions of the resulting structure kmp_task_t.
Emit a call to kmp_int32 __kmpc_omp_task(ident_t *, kmp_int32 gtid, kmp_task_t *new_task), where new_task is a resulting structure from previous items.
Differential Revision: http://reviews.llvm.org/D7560
llvm-svn: 231762
Patch adds proper generation of debug info for all OpenMP regions. Also, all OpenMP regions are generated in a termination scope, because standard does not allow to throw exceptions out of structured blocks, associated with the OpenMP regions
Differential Revision: http://reviews.llvm.org/D7935
llvm-svn: 231757
This reverts commit r231752.
It was failing to link with cmake:
lib64/libclangCodeGen.a(CGOpenMPRuntime.cpp.o):/home/espindola/llvm/llvm/tools/clang/lib/CodeGen/CGOpenMPRuntime.cpp:function clang::CodeGen::InlinedOpenMPRegionRAII::~InlinedOpenMPRegionRAII(): error: undefined reference to 'clang::CodeGen::EHScopeStack::popTerminate()'
clang-3.7: error: linker command failed with exit code 1 (use -v to see invocation)
llvm-svn: 231754
Patch adds proper generation of debug info for all OpenMP regions. Also, all OpenMP regions are generated in a termination scope, because standard does not allow to throw exceptions out of structured blocks, associated with the OpenMP regions
Differential Revision: http://reviews.llvm.org/D7935
llvm-svn: 231752
For global reg lvalue - use regular store through global register.
For simple lvalue - use simple atomic store.
For bitfields, vector element, extended vector elements - the original value of the whole storage (for vector elements) or of some aligned value (for bitfields) is atomically read, the part of this value for the given lvalue is modified and then use atomic compare-and-exchange operation to try to atomically write modified value (if it was not modified).
Also, changes in this patch fix the bug for '#pragma omp atomic read' applied to extended vector elements.
Differential Revision: http://reviews.llvm.org/D7369
llvm-svn: 230736
The /volatile:ms semantics turn volatile loads and stores into atomic
acquire and release operations. This distinction is important because
volatile memory operations do not form a happens-before relationship
with non-atomic memory. This means that a volatile store is not
sufficient for implementing a mutex unlock routine.
Differential Revision: http://reviews.llvm.org/D7580
llvm-svn: 229082
This patch emits the following code for the single directive:
#pragma omp single
<body>
<---->
if(__kmpc_single(...)) {
<body>
__kmpc_end_single(...);
}
Differential Revision: http://reviews.llvm.org/D7045
llvm-svn: 228275
For 'taskyield' directive emit call to kmp_int32 __kmpc_omp_taskyield(ident_t *,
kmp_int32 global_tid, int end_part); runtime function call with end_part arg set
to 0 (it is ignored).
Differential Revision: http://reviews.llvm.org/D7047
llvm-svn: 228272
distinction between the different use-cases. With the previous default
behavior we would occasionally emit empty debug locations in situations
where they actually were strictly required (= on invoke insns).
We now have a choice between defaulting to an empty location or an
artificial location.
Specifically, this fixes a bug caused by a missing debug location when
emitting C++ EH cleanup blocks from within an artificial function, such as
an ObjC destroy helper function.
rdar://problem/19670595
llvm-svn: 228003
"omp atomic read [seq_cst]" accepts expressions "v=x;". In this patch we perform
an atomic load of "x" (using builtin atomic loading instructions or a call to
"atomic_load()" for simple lvalues and "kmpc_atomic_start();load
<x>;kmpc_atomic_end();" for other lvalues), convert the result of loading to
type of "v" (using EmitScalarConversion() for simple types and
EmitComplexToScalarConversion() for conversions from complex to scalar) and then
store the result in "v".)
Differential Revision: http://reviews.llvm.org/D6431
llvm-svn: 226788
"omp atomic read [seq_cst]" accepts expressions "v=x;". In this patch we perform
an atomic load of "x" (using builtin atomic loading instructions or a call to
"atomic_load()" for simple lvalues and "kmpc_atomic_start();load
<x>;kmpc_atomic_end();" for other lvalues), convert the result of loading to
type of "v" (using EmitScalarConversion() for simple types and
EmitComplexToScalarConversion() for conversions from complex to scalar) and then
store the result in "v".)
Differential Revision: http://reviews.llvm.org/D6431
llvm-svn: 226786
"omp atomic read [seq_cst]" accepts expressions "v=x;". In this patch we perform
an atomic load of "x" (using builtin atomic loading instructions or a call to
"atomic_load()" for simple lvalues and "kmpc_atomic_start();load
<x>;kmpc_atomic_end();" for other lvalues), convert the result of loading to
type of "v" (using EmitScalarConversion() for simple types and
EmitComplexToScalarConversion() for conversions from complex to scalar) and then
store the result in "v".
Differential Revision: http://reviews.llvm.org/D6431
llvm-svn: 226784
Sorry for the noise, I managed to miss a bunch of recent regressions of
include orderings here. This should actually sort all the includes for
Clang. Again, no functionality changed, this is just a mechanical
cleanup that I try to run periodically to keep the #include lines as
regular as possible across the project.
llvm-svn: 225979
Several pieces of code were relying on implicit debug location setting
which usually lead to incorrect line information anyway. So I've fixed
those (in r225955 and r225845) separately which should pave the way for
this commit to be cleanly reapplied.
The reason these implicit dependencies resulted in crashes with this
patch is that the debug location would no longer implicitly leak from
one place to another, but be set back to invalid. Once a call with
no/invalid location was emitted, if that call was ever inlined it could
produce invalid debugloc chains and assert during LLVM's codegen.
There may be further cases of such bugs in this patch - they're hard to
flush out with regression testing, so I'll keep an eye out for reports
and investigate/fix them ASAP if they come up.
Original commit message:
Reapply "DebugInfo: Generalize debug info location handling"
Originally committed in r224385 and reverted in r224441 due to concerns
this change might've introduced a crash. Turns out this change fixes the
crash introduced by one of my earlier more specific location handling
changes (those specific fixes are reverted by this patch, in favor of
the more general solution).
Recommitted in r224941 and reverted in r224970 after it caused a crash
when building compiler-rt. Looks to be due to this change zeroing out
the debug location when emitting default arguments (which were meant to
inherit their outer expression's location) thus creating call
instructions without locations - these create problems for inlining and
must not be created. That is fixed and tested in this version of the
change.
Original commit message:
This is a more scalable (fixed in mostly one place, rather than many
places that will need constant improvement/maintenance) solution to
several commits I've made recently to increase source fidelity for
subexpressions.
This resetting had to be done at the DebugLoc level (not the
SourceLocation level) to preserve scoping information (if the resetting
was done with CGDebugInfo::EmitLocation, it would've caused the tail end
of an expression's codegen to end up in a potentially different scope
than the start, even though it was at the same source location). The
drawback to this is that it might leave CGDebugInfo out of sync. Ideally
CGDebugInfo shouldn't have a duplicate sense of the current
SourceLocation, but for now it seems it does... - I don't think I'm
going to tackle removing that just now.
I expect this'll probably cause some more buildbot fallout & I'll
investigate that as it comes up.
Also these sort of improvements might be starting to show a weakness/bug
in LLVM's line table handling: we don't correctly emit is_stmt for
statements, we just put it on every line table entry. This means one
statement split over multiple lines appears as multiple 'statements' and
two statements on one line (without column info) are treated as one
statement.
I don't think we have any IR representation of statements that would
help us distinguish these cases and identify the beginning of each
statement - so that might be something we need to add (possibly to the
lexical scope chain - a scope for each statement). This does cause some
problems for GDB and possibly other DWARF consumers.
llvm-svn: 225956
This reverts commit r225000, r225021, r225083, r225086, r225090.
The root change (r225000) still has several issues where it's caused
calls to be emitted without debug locations. This causes assertion
failures if/when those calls are inlined.
I'll work up some test cases and fixes before recommitting this.
llvm-svn: 225555
Originally committed in r224385 and reverted in r224441 due to concerns
this change might've introduced a crash. Turns out this change fixes the
crash introduced by one of my earlier more specific location handling
changes (those specific fixes are reverted by this patch, in favor of
the more general solution).
Recommitted in r224941 and reverted in r224970 after it caused a crash
when building compiler-rt. Looks to be due to this change zeroing out
the debug location when emitting default arguments (which were meant to
inherit their outer expression's location) thus creating call
instructions without locations - these create problems for inlining and
must not be created. That is fixed and tested in this version of the
change.
Original commit message:
This is a more scalable (fixed in mostly one place, rather than many
places that will need constant improvement/maintenance) solution to
several commits I've made recently to increase source fidelity for
subexpressions.
This resetting had to be done at the DebugLoc level (not the
SourceLocation level) to preserve scoping information (if the resetting
was done with CGDebugInfo::EmitLocation, it would've caused the tail end
of an expression's codegen to end up in a potentially different scope
than the start, even though it was at the same source location). The
drawback to this is that it might leave CGDebugInfo out of sync. Ideally
CGDebugInfo shouldn't have a duplicate sense of the current
SourceLocation, but for now it seems it does... - I don't think I'm
going to tackle removing that just now.
I expect this'll probably cause some more buildbot fallout & I'll
investigate that as it comes up.
Also these sort of improvements might be starting to show a weakness/bug
in LLVM's line table handling: we don't correctly emit is_stmt for
statements, we just put it on every line table entry. This means one
statement split over multiple lines appears as multiple 'statements' and
two statements on one line (without column info) are treated as one
statement.
I don't think we have any IR representation of statements that would
help us distinguish these cases and identify the beginning of each
statement - so that might be something we need to add (possibly to the
lexical scope chain - a scope for each statement). This does cause some
problems for GDB and possibly other DWARF consumers.
llvm-svn: 225000
Originally committed in r224385 and reverted in r224441 due to concerns
this change might've introduced a crash. Turns out this change fixes the
crash introduced by one of my earlier more specific location handling
changes (those specific fixes are reverted by this patch, in favor of
the more general solution).
Original commit message:
This is a more scalable (fixed in mostly one place, rather than many
places that will need constant improvement/maintenance) solution to
several commits I've made recently to increase source fidelity for
subexpressions.
This resetting had to be done at the DebugLoc level (not the
SourceLocation level) to preserve scoping information (if the resetting
was done with CGDebugInfo::EmitLocation, it would've caused the tail end
of an expression's codegen to end up in a potentially different scope
than the start, even though it was at the same source location). The
drawback to this is that it might leave CGDebugInfo out of sync. Ideally
CGDebugInfo shouldn't have a duplicate sense of the current
SourceLocation, but for now it seems it does... - I don't think I'm
going to tackle removing that just now.
I expect this'll probably cause some more buildbot fallout & I'll
investigate that as it comes up.
Also these sort of improvements might be starting to show a weakness/bug
in LLVM's line table handling: we don't correctly emit is_stmt for
statements, we just put it on every line table entry. This means one
statement split over multiple lines appears as multiple 'statements' and
two statements on one line (without column info) are treated as one
statement.
I don't think we have any IR representation of statements that would
help us distinguish these cases and identify the beginning of each
statement - so that might be something we need to add (possibly to the
lexical scope chain - a scope for each statement). This does cause some
problems for GDB and possibly other DWARF consumers.
llvm-svn: 224941
Alexey Bataev