Finally all targets are enabling multiple regalloc hints, so the hook to
disable this can now be removed.
NFC.
Review: Simon Pilgrim
https://reviews.llvm.org/D52316
llvm-svn: 343851
Now that D51487 has landed, the last machine verifier tests that failed EXPENSIVE_CHECKS builds have now been fixed/removed, so we can remove @MatzeB 's isMachineVerifierClean() hack for sparc targets.
Differential Revision: https://reviews.llvm.org/D52612
llvm-svn: 343232
Summary: It is currently broken and for Sparc there is not much benefit
in using a builtin version compared to a library version. Both versions
needs to store the same four values in setjmp and flush the register
windows in longjmp. If the need for a builtin setjmp/longjmp arises there
is an improved implementation available at https://reviews.llvm.org/D50969.
Reviewers: jyknight, joerg, venkatra
Subscribers: fedor.sergeev, jrtc27, llvm-commits
Differential Revision: https://reviews.llvm.org/D51487
llvm-svn: 343210
Summary: Use 0 as the default immediate for the UNIMP instruction.
This matches the behavior in gas.
Reviewers: jyknight, venkatra
Subscribers: fedor.sergeev, jrtc27, llvm-commits
Differential Revision: https://reviews.llvm.org/D51526
llvm-svn: 343203
Summary:
Partial write %PSR (WRPSR) is a SPARC V8e option that allows WRPSR
instructions to only affect the %PSR.ET field. It is supported by
the GR740 and GR716.
Reviewers: jyknight, venkatra
Subscribers: fedor.sergeev, jrtc27, llvm-commits
Differential Revision: https://reviews.llvm.org/D48644
llvm-svn: 343202
Disassemblers cannot depend on main target headers. The same is true for
MCTargetDesc, but there's a lot more cleanup needed for that.
llvm-svn: 341822
Summary:
In the case of (and reg, constant) or (or reg, constant), it can be
beneficial to use a ANDNrr/ORNrr instruction instead of ANDrr/ORrr,
if the complement of the constant can be encoded using a single SETHI
instruction instead of a SETHI/ORri pair.
If the constant has more than one use, it is probably better to keep it
in its original form.
Reviewers: jyknight, venkatra
Reviewed By: jyknight
Subscribers: fedor.sergeev, jrtc27, llvm-commits
Differential Revision: https://reviews.llvm.org/D50964
llvm-svn: 341069
Summary: If an object file ends with a relocation that is smaller
than 4 bytes we will write outside the Data array and trigger an
"Invalid index" assertion.
Reviewers: jyknight, venkatra
Reviewed By: jyknight
Subscribers: fedor.sergeev, jrtc27, llvm-commits
Differential Revision: https://reviews.llvm.org/D50971
llvm-svn: 340736
Summary: The GR740 provides an up cycle counter in the registers ASR22
and ASR23. As these registers can not be read together atomically we only
use the value of ASR23 for llvm.readcyclecounter(). The ASR23 register
holds the 32 LSBs of the up-counter.
Reviewers: jyknight, venkatra
Reviewed By: jyknight
Subscribers: jfb, fedor.sergeev, jrtc27, llvm-commits
Differential Revision: https://reviews.llvm.org/D48638
llvm-svn: 340733
Summary:
Currently bitcasting constants from f64 to v2i32 is done by storing the
value to the stack and then loading it again. This is not necessary, but
seems to happen because v2i32 is a valid type for Sparc V8. If it had not
been legal, we would have gotten help from the type legalizer.
This patch tries to do the same work as the legalizer would have done by
bitcasting the floating point constant and splitting the value up into a
vector of two i32 values.
Reviewers: venkatra, jyknight
Reviewed By: jyknight
Subscribers: glaubitz, fedor.sergeev, jrtc27, llvm-commits
Differential Revision: https://reviews.llvm.org/D49219
llvm-svn: 340723
Summary:
Looking at the callee argument list, as is done now, might not work if
the function has been typecasted into one that is expected to return
a struct. This change also simplifies the code.
The isFP128ABICall() function can be removed as it is no longer needed.
The test in fp128.ll has been updated to verify this.
Reviewers: jyknight, venkatra
Reviewed By: jyknight
Subscribers: fedor.sergeev, jrtc27, llvm-commits
Differential Revision: https://reviews.llvm.org/D48117
llvm-svn: 340008
Summary: When @llvm.returnaddress is called with a value higher than 0
it needs to read from the call stack to get the return address. This
means that the register windows needs to be flushed to the stack to
guarantee that the data read is valid. For values higher than 1 this
is done indirectly by the call to getFRAMEADDR(), but not for the value 1.
Reviewers: jyknight, venkatra
Reviewed By: jyknight
Subscribers: fedor.sergeev, jrtc27, llvm-commits
Differential Revision: https://reviews.llvm.org/D48636
llvm-svn: 340003
Summary: The GR740 provides an up cycle counter in the
registers ASR22 and ASR23. As these registers can not be
read together atomically we only use the value of ASR23
for llvm.readcyclecounter(). The ASR23 register holds the
32 LSBs of the up-counter.
Reviewers: jyknight, venkatra
Reviewed By: jyknight
Subscribers: fedor.sergeev, jrtc27, llvm-commits
Differential Revision: https://reviews.llvm.org/D48638
llvm-svn: 339551
This reverts commit 55222c9183c6e07f53a54c4061677734f54feac1.
I missed that this patch has a dependency on https://reviews.llvm.org/D49219
that has not been approved yet.
llvm-svn: 337373
Summary: This is how it appears to be handled in GCC and it prevents a
"Unknown mismatch" error in the SelectionDAGBuilder.
Reviewers: venkatra, jyknight, jrtc27
Reviewed By: jyknight, jrtc27
Subscribers: eraman, fedor.sergeev, jrtc27, llvm-commits
Differential Revision: https://reviews.llvm.org/D49218
llvm-svn: 337370
The ta instruction will always trap, regardless of the value
of the integer condition codes. TRAPri is marked as using icc,
so we cannot use a pattern for TRAPri to implement ta 1, as
verify-machineinstrs can complain that icc is not defined.
Instead we implement ta 1 the same way as ta 5.
llvm-svn: 337236
Summary: These are the names used in libgcc.
Reviewers: venkatra, jyknight, ekedaigle
Reviewed By: jyknight
Subscribers: joerg, fedor.sergeev, jrtc27, llvm-commits
Differential Revision: https://reviews.llvm.org/D48915
llvm-svn: 337164
Summary: Software trap number one is the trap used for breakpoints
in the Sparc ABI.
Reviewers: jyknight, venkatra
Reviewed By: jyknight
Subscribers: fedor.sergeev, jrtc27, llvm-commits
Differential Revision: https://reviews.llvm.org/D48637
llvm-svn: 337163
Summary: When compiling with -fpic, in contrast to -fPIC, use only the
immediate field to index into the GOT. This saves space if the GOT is
known to be small. The linker will warn if the GOT is too large for
this method.
Reviewers: jyknight, venkatra
Reviewed By: jyknight
Subscribers: brad, fedor.sergeev, jrtc27, llvm-commits
Differential Revision: https://reviews.llvm.org/D47136
llvm-svn: 334383
On targets like Arm some relaxations may only be performed when certain
architectural features are available. As functions can be compiled with
differing levels of architectural support we must make a judgement on
whether we can relax based on the MCSubtargetInfo for the function. This
change passes through the MCSubtargetInfo for the function to
fixupNeedsRelaxation so that the decision on whether to relax can be made
per function. In this patch, only the ARM backend makes use of this
information. We must also pass the MCSubtargetInfo to applyFixup because
some fixups skip error checking on the assumption that relaxation has
occurred, to prevent code-generation errors applyFixup must see the same
MCSubtargetInfo as fixupNeedsRelaxation.
Differential Revision: https://reviews.llvm.org/D44928
llvm-svn: 334078
Summary:
They've been deprecated in favor of UADDO/ADDCARRY or USUBO/SUBCARRY for a while.
Target that uses these opcodes are changed in order to ensure their behavior doesn't change.
Reviewers: efriedma, craig.topper, dblaikie, bkramer
Subscribers: jholewinski, arsenm, jyknight, sdardis, nemanjai, nhaehnle, kbarton, fedor.sergeev, asb, rbar, johnrusso, simoncook, jordy.potman.lists, apazos, sabuasal, niosHD, jrtc27, zzheng, edward-jones, mgrang, atanasyan, llvm-commits
Differential Revision: https://reviews.llvm.org/D47422
llvm-svn: 333748
They get type Other when used in the clobber list in inline assembly.
This fixes tests fp128.ll and float.ll that failed after r333512.
llvm-svn: 333523
Summary: The fX version of floating-point registers only supports
single precision. We need to map the name to dX for doubles and qX
for long doubles if we want getRegForInlineAsmConstraint() to be
able to pick the correct register class.
Reviewers: jyknight, venkatra
Reviewed By: jyknight
Subscribers: eraman, fedor.sergeev, jrtc27, llvm-commits
Differential Revision: https://reviews.llvm.org/D47258
llvm-svn: 333512
Summary:
Adding these makes it easier to assemble the output from GCC which
generates a lot of .uahalf and .uaword directives.
GAS treats .uahalf and .half the same unless the --enforce-aligned-data
flag is used. I could not find a similar flag for LLVM so it seems that
.half does not have any alignment requirement and is treated the same as
.uahalf should be. If that would change later on then the tests in
sparc-directives.s would fail due to bad alignment.
Reviewers: jyknight, asb
Reviewed By: jyknight
Subscribers: fedor.sergeev, jrtc27, llvm-commits
Differential Revision: https://reviews.llvm.org/D47319
llvm-svn: 333372
The Sparc asm parser currently has custom parsing logic for .half, .word,
.nword and .xword. Rather than use this custom logic, we can just use
addAliasForDirective to enable the reuse of AsmParser::parseDirectiveValue.
https://reviews.llvm.org/D47003
llvm-svn: 333078
With this we gain a little flexibility in how the generic object
writer is created.
Part of PR37466.
Differential Revision: https://reviews.llvm.org/D47045
llvm-svn: 332868
To make this work I needed to add an endianness field to MCAsmBackend
so that writeNopData() implementations know which endianness to use.
Part of PR37466.
Differential Revision: https://reviews.llvm.org/D47035
llvm-svn: 332857
Provide some free functions to reduce verbosity of endian-writing
a single value, and replace the endianness template parameter with
a field.
Part of PR37466.
Differential Revision: https://reviews.llvm.org/D47032
llvm-svn: 332757
Because we create a new kind of debug instruction, DBG_LABEL, we need to
check all passes which use isDebugValue() to check MachineInstr is debug
instruction or not. When expelling debug instructions, we should expel
both DBG_VALUE and DBG_LABEL. So, I create a new function,
isDebugInstr(), in MachineInstr to check whether the MachineInstr is
debug instruction or not.
This patch has no new test case. I have run regression test and there is
no difference in regression test.
Differential Revision: https://reviews.llvm.org/D45342
Patch by Hsiangkai Wang.
llvm-svn: 331844
Summary:
Reading Atmel's AT697E errata document this does not seem like a valid
workaround. While the text only mentions SDIV, it says that the ICC flags
can be wrong, and those are only generated by SDIVcc. Verification on
hardware shows that simply replacing SDIV with SDIVcc does not avoid
the bug with negative operands.
This reverts r283727.
Reviewers: lero_chris, jyknight
Reviewed By: jyknight
Subscribers: fedor.sergeev, jrtc27, llvm-commits
Differential Revision: https://reviews.llvm.org/D45813
llvm-svn: 330397
Summary:
If a 64-bit register is used as an operand in inline assembly together
with a memory reference, the memory addressing will be wrong. The
addressing will be a single reg, instead of reg+reg or reg+imm. This
will generate a bad offset value or an exception in printMemOperand().
For example:
```
long long int val = 5;
long long int mem;
__asm__ volatile ("std %1, %0":"=m"(mem):"r"(val));
```
becomes:
```
std %i0, [%i2+589833]
```
The problem is that SelectInlineAsmMemoryOperand() is never called for
the memory references if one of the operands is a 64-bit register.
By calling SelectInlineAsmMemoryOperands() in tryInlineAsm() the Sparc
version of SelectInlineAsmMemoryOperand() gets called for each memory
reference.
Reviewers: jyknight, venkatra
Reviewed By: jyknight
Subscribers: eraman, fedor.sergeev, jrtc27, llvm-commits
Differential Revision: https://reviews.llvm.org/D45761
llvm-svn: 330392
Makes it easier to see mistakes such as the one fixed in r329178 and makes
the different target CMakeLists more consistent.
Also remove some stale-looking comments from the Nios2 target cmakefile.
No intended behavior change.
llvm-svn: 329181
Emulated TLS is enabled by llc flag -emulated-tls,
which is passed by clang driver.
When llc is called explicitly or from other drivers like LTO,
missing -emulated-tls flag would generate wrong TLS code for targets
that supports only this mode.
Now use useEmulatedTLS() instead of Options.EmulatedTLS to decide whether
emulated TLS code should be generated.
Unit tests are modified to run with and without the -emulated-tls flag.
Differential Revision: https://reviews.llvm.org/D42999
llvm-svn: 326341
Enable multiple COPY hints to eliminate more COPYs during register allocation.
Note that this is something all targets should do, see
https://reviews.llvm.org/D38128.
Review: James Y Knight
llvm-svn: 326028
Summary:
Add a target option AllowRegisterRenaming that is used to opt in to
post-register-allocation renaming of registers. This is set to 0 by
default, which causes the hasExtraSrcRegAllocReq/hasExtraDstRegAllocReq
fields of all opcodes to be set to 1, causing
MachineOperand::isRenamable to always return false.
Set the AllowRegisterRenaming flag to 1 for all in-tree targets that
have lit tests that were effected by enabling COPY forwarding in
MachineCopyPropagation (AArch64, AMDGPU, ARM, Hexagon, Mips, PowerPC,
RISCV, Sparc, SystemZ and X86).
Add some more comments describing the semantics of the
MachineOperand::isRenamable function and how it is set and maintained.
Change isRenamable to check the operand's opcode
hasExtraSrcRegAllocReq/hasExtraDstRegAllocReq bit directly instead of
relying on it being consistently reflected in the IsRenamable bit
setting.
Clear the IsRenamable bit when changing an operand's register value.
Remove target code that was clearing the IsRenamable bit when changing
registers/opcodes now that this is done conservatively by default.
Change setting of hasExtraSrcRegAllocReq in AMDGPU target to be done in
one place covering all opcodes that have constant pipe read limit
restrictions.
Reviewers: qcolombet, MatzeB
Subscribers: aemerson, arsenm, jyknight, mcrosier, sdardis, nhaehnle, javed.absar, tpr, arichardson, kristof.beyls, kbarton, fedor.sergeev, asb, rbar, johnrusso, simoncook, jordy.potman.lists, apazos, sabuasal, niosHD, escha, nemanjai, llvm-commits
Differential Revision: https://reviews.llvm.org/D43042
llvm-svn: 325931
Global Dynamic and Local Dynamic call relocations only implicitly
reference __tls_get_addr; there is no connection in the ELF file between
the relocations and the symbol other than the specification for the
relocations' semantics. However, it still needs to be in the symbol
table despite the lack of explicit references to the symbol table entry,
since it needs to be bound at link time for these relocations, otherwise
any objects will fail to link.
For details, see https://sourceware.org/bugzilla/show_bug.cgi?id=22832.
Path by: James Clarke (jrtc27)
Differential revision: https://reviews.llvm.org/D43271
llvm-svn: 325688
Summary: This was broken long ago in D12208, which failed to account for
the fact that 64-bit SPARC uses a stack bias of 2047, and it is the
*unbiased* value which should be aligned, not the biased one. This was
seen to be an issue with Rust.
Patch by: jrtc27 (James Clarke)
Reviewers: jyknight, venkatra
Reviewed By: jyknight
Subscribers: jacob_hansen, JDevlieghere, fhahn, fedor.sergeev, llvm-commits
Differential Revision: https://reviews.llvm.org/D39425
llvm-svn: 323643
Currently it's not possible to access MCSubtargetInfo from a TgtMCAsmBackend.
D20830 threaded an MCSubtargetInfo reference through
MCAsmBackend::relaxInstruction, but this isn't the only function that would
benefit from access. This patch removes the Triple and CPUString arguments
from createMCAsmBackend and replaces them with MCSubtargetInfo.
This patch just changes the interface without making any intentional
functional changes. Once in, several cleanups are possible:
* Get rid of the awkward MCSubtargetInfo handling in ARMAsmBackend
* Support 16-bit instructions when valid in MipsAsmBackend::writeNopData
* Get rid of the CPU string parsing in X86AsmBackend and just use a SubtargetFeature for HasNopl
* Emit 16-bit nops in RISCVAsmBackend::writeNopData if the compressed instruction set extension is enabled (see D41221)
This change initially exposed PR35686, which has since been resolved in r321026.
Differential Revision: https://reviews.llvm.org/D41349
llvm-svn: 321692
As part of the unification of the debug format and the MIR format,
always print registers as lowercase.
* Only debug printing is affected. It now follows MIR.
Differential Revision: https://reviews.llvm.org/D40417
llvm-svn: 319187
Jonas Paulsson