Field 2 of DIType (Context), field 9 of DIDerivedType (TypeDerivedFrom),
field 12 of DICompositeType (ContainingType), fields 2, 7, 12 of DISubprogram
(Context, Type, ContainingType).
llvm-svn: 190205
This reverts commit r189886.
I found a corner case where this optimization is not valid:
Say we have a "linkonce_odr unnamed_addr" in two translation units:
* In TU 1 this optimization kicks in and makes it hidden.
* In TU 2 it gets const merged with a constant that is *not* unnamed_addr,
resulting in a non unnamed_addr constant with default visibility.
* The static linker rules for combining visibility them produce a hidden
symbol, which is incorrect from the point of view of the non unnamed_addr
constant.
The one place we can do this is when we know that the symbol is not used from
another TU in the same shared object, i.e., during LTO. I will move it there.
llvm-svn: 189954
"(icmp op i8 A, B)" is equivalent to "(icmp op i8 (A & 0xff), B)" as a
degenerate case. Allowing this as a "masked" comparison when analysing "(icmp)
&/| (icmp)" allows us to combine them in more cases.
rdar://problem/7625728
llvm-svn: 189931
Even in cases which aren't universally optimisable like "(A & B) != 0 && (A &
C) != 0", the masks can make one of the comparisons completely redundant. In
this case, since we've gone to the effort of spotting masked comparisons we
should combine them.
rdar://problem/7625728
llvm-svn: 189930
Original message:
If a constant or a function has linkonce_odr linkage and unnamed_addr, mark
hidden. Being linkonce_odr guarantees that it is available in every dso that
needs it. Being a constant/function with unnamed_addr guarantees that the
copies don't have to be merged.
llvm-svn: 189886
The reason that I am turning off this optimization is that there is an
additional case where a block can escape that has come up. Specifically, this
occurs when a block is used in a scope outside of its current scope.
This can cause a captured retainable object pointer whose life is preserved by
the objc_retainBlock to be deallocated before the block is invoked.
An example of the code needed to trigger the bug is:
----
\#import <Foundation/Foundation.h>
int main(int argc, const char * argv[]) {
void (^somethingToDoLater)();
{
NSObject *obj = [NSObject new];
somethingToDoLater = ^{
[obj self]; // Crashes here
};
}
NSLog(@"test.");
somethingToDoLater();
return 0;
}
----
In the next commit, I remove all the dead code that results from this.
Once I put in the fixing commit I will bring back the tests that I deleted in
this commit.
rdar://14802782.
rdar://14868830.
llvm-svn: 189869
1) If the width of vectorization list candidate is bigger than vector reg width, we will break it down to fit the vector reg.
2) We do not vectorize the width which is not power of two.
The performance result shows it will help some spec benchmarks. mesa improved 6.97% and ammp improved 1.54%.
llvm-svn: 189830
The existing code missed some edge cases when e.g. we're going to emit sqrtf but
only the availability of sqrt was checked. This happens on odd platforms like
windows.
llvm-svn: 189724
PR17026. Also avoid undefined shifts and shift amounts larger than 64 bits
(those are always undef because we can't represent integer types that large).
llvm-svn: 189672
When unrolling is disabled in the pass manager, the loop vectorizer should also
not unroll loops. This will allow the -fno-unroll-loops option in Clang to
behave as expected (even for vectorizable loops). The loop vectorizer's
-force-vector-unroll option will (continue to) override the pass-manager
setting (including -force-vector-unroll=0 to force use of the internal
auto-selection logic).
In order to test this, I added a flag to opt (-disable-loop-unrolling) to force
disable unrolling through opt (the analog of -fno-unroll-loops in Clang). Also,
this fixes a small bug in opt where the loop vectorizer was enabled only after
the pass manager populated the queue of passes (the global_alias.ll test needed
a slight update to the RUN line as a result of this fix).
llvm-svn: 189499
The builder inserts from before the insert point,
not after, so this would insert before the last
instruction in the bundle instead of after it.
I'm not sure if this can actually be a problem
with any of the current insertions.
llvm-svn: 189285
DICompositeType will have an identifier field at position 14. For now, the
field is set to null in DIBuilder.
For DICompositeTypes where the template argument field (the 13th field)
was optional, modify DIBuilder to make sure the template argument field is set.
Now DICompositeType has 15 fields.
Update DIBuilder to use NULL instead of "i32 0" for null value of a MDNode.
Update verifier to check that DICompositeType has 15 fields and the last
field is null or a MDString.
Update testing cases to include an extra field for DICompositeType.
The identifier field will be used by type uniquing so a front end can
genearte a DICompositeType with a unique identifer.
llvm-svn: 189282
This patch enables unrolling of loops when vectorization is legal but not profitable.
We add a new class InnerLoopUnroller, that extends InnerLoopVectorizer and replaces some of the vector-specific logic with scalars.
This patch does not introduce any runtime regressions and improves the following workloads:
SingleSource/Benchmarks/Shootout/matrix -22.64%
SingleSource/Benchmarks/Shootout-C++/matrix -13.06%
External/SPEC/CINT2006/464_h264ref/464_h264ref -3.99%
SingleSource/Benchmarks/Adobe-C++/simple_types_constant_folding -1.95%
llvm-svn: 189281
The current version of StripDeadDebugInfo became stale and no longer actually
worked since it was expecting an older version of debug info.
This patch updates it to use DebugInfoFinder and the modern DebugInfo classes as
much as possible to make it more redundent to such changes. Additionally, the
only place where that was avoided (the code where we replace the old sets with
the new), I call verify on the DIContextUnit implying that if the format changes
and my live set changes no longer make sense an assert will be hit. In order to
ensure that that occurs I have included a test case.
The actual stripping of the dead debug info follows the same strategy as was
used before in this class: find the live set and replace the old set in the
given compile unit (which may contain dead global variables/functions) with the
new live one.
llvm-svn: 189078
A single metadata will not span multiple lines. This also helps me with
my script to automatic update the testing cases.
A debug info testing case should have a llvm.dbg.cu.
Do not use hard-coded id for debug nodes.
llvm-svn: 189033
using GEPs. Previously, it used a number of different heuristics for
analyzing the GEPs. Several of these were conservatively correct, but
failed to fall back to SCEV even when SCEV might have given a reasonable
answer. One was simply incorrect in how it was formulated.
There was good code already to recursively evaluate the constant offsets
in GEPs, look through pointer casts, etc. I gathered this into a form
code like the SLP code can use in a previous commit, which allows all of
this code to become quite simple.
There is some performance (compile time) concern here at first glance as
we're directly attempting to walk both pointers constant GEP chains.
However, a couple of thoughts:
1) The very common cases where there is a dynamic pointer, and a second
pointer at a constant offset (usually a stride) from it, this code
will actually not do any unnecessary work.
2) InstCombine and other passes work very hard to collapse constant
GEPs, so it will be rare that we iterate here for a long time.
That said, if there remain performance problems here, there are some
obvious things that can improve the situation immensely. Doing
a vectorizer-pass-wide memoizer for each individual layer of pointer
values, their base values, and the constant offset is likely to be able
to completely remove redundant work and strictly limit the scaling of
the work to scrape these GEPs. Since this optimization was not done on
the prior version (which would still benefit from it), I've not done it
here. But if folks have benchmarks that slow down it should be straight
forward for them to add.
I've added a test case, but I'm not really confident of the amount of
testing done for different access patterns, strides, and pointer
manipulation.
llvm-svn: 189007
Update iterator when the SLP vectorizer changes the instructions in the basic
block by restarting the traversal of the basic block.
Patch by Yi Jiang!
Fixes PR 16899.
llvm-svn: 188832
This adds a llvm.copysign intrinsic; We already have Libfunc recognition for
copysign (which is turned into the FCOPYSIGN SDAG node). In order to
autovectorize calls to copysign in the loop vectorizer, we need a corresponding
intrinsic as well.
In addition to the expected changes to the language reference, the loop
vectorizer, BasicTTI, and the SDAG builder (the intrinsic is transformed into
an FCOPYSIGN node, just like the function call), this also adds FCOPYSIGN to a
few lists in LegalizeVector{Ops,Types} so that vector copysigns can be
expanded.
In TargetLoweringBase::initActions, I've made the default action for FCOPYSIGN
be Expand for vector types. This seems correct for all in-tree targets, and I
think is the right thing to do because, previously, there was no way to generate
vector-values FCOPYSIGN nodes (and most targets don't specify an action for
vector-typed FCOPYSIGN).
llvm-svn: 188728
- Instead of setting the suffixes in a bunch of places, just set one master
list in the top-level config. We now only modify the suffix list in a few
suites that have one particular unique suffix (.ml, .mc, .yaml, .td, .py).
- Aside from removing the need for a bunch of lit.local.cfg files, this enables
4 tests that were inadvertently being skipped (one in
Transforms/BranchFolding, a .s file each in DebugInfo/AArch64 and
CodeGen/PowerPC, and one in CodeGen/SI which is now failing and has been
XFAILED).
- This commit also fixes a bunch of config files to use config.root instead of
older copy-pasted code.
llvm-svn: 188513
When both constants are positive or both constants are negative,
InstCombine already simplifies comparisons like this, but when
it's exactly zero and -1, the operand sorting ends up reversed
and the pattern fails to match. Handle that special case.
Follow up for rdar://14689217
llvm-svn: 188512
Use the pointer size if datalayout is available.
Use i64 if it's not, which is consistent with what other
places do when the pointer size is unknown.
The test doesn't really test this in a useful way
since it will be transformed to that later anyway,
but this now tests it for non-zero arrays and when
datalayout isn't available. The cases in
visitGetElementPtrInst should save an extra re-visit to
the newly created GEP since it won't need to cleanup after
itself.
llvm-svn: 188339
When computing the use set of a store, we need to add the store to the write
set prior to iterating over later instructions. Otherwise, if there is a later
aliasing load of that store, that load will not be tagged as a use, and bad
things will happen.
trackUsesOfI still adds later dependent stores of an instruction to that
instruction's write set, but it never sees the original instruction, and so
when tracking uses of a store, the store must be added to the write set by the
caller.
Fixes PR16834.
llvm-svn: 188329
However, opt -O2 doesn't run mem2reg directly so nobody noticed until r188146
when SROA started sending more things directly down the PromoteMemToReg path.
In order to revert r187191, I also revert dependent revisions r187296, r187322
and r188146. Fixes PR16867. Does not add the testcases from that PR, but both
of them should get added for both mem2reg and sroa when this revert gets
unreverted.
llvm-svn: 188327
Do not generate new vector values for the same entries because we know that the incoming values
from the same block must be identical.
llvm-svn: 188185
Various tests had sprung up over the years which had --check-prefix=ABC on the
RUN line, but "CHECK-ABC:" later on. This happened to work before, but was
strictly incorrect. FileCheck is getting stricter soon though.
Patch by Ron Ofir.
llvm-svn: 188173
These functions used to assume that the lsb of an integer corresponds
to vector element 0, whereas for big-endian it's the other way around:
the msb is in the first element and the lsb is in the last element.
Fixes MultiSource/Benchmarks/mediabench/gsm/toast for z.
llvm-svn: 188155
I fixed the aforementioned problems that came up on some of the linux boxes.
Major thanks to Nick Lewycky for his help debugging!
rdar://14590914
llvm-svn: 188122
This reverts commit r187941.
The commit was passing on my os x box, but it is failing on some non-osx
platforms. I do not have time to look into it now, so I am reverting and will
recommit after I figure this out.
llvm-svn: 187946
All libm floating-point rounding functions, except for round(), had their own
ISD nodes. Recent PowerPC cores have an instruction for round(), and so here I'm
adding ISD::FROUND so that round() can be custom lowered as well.
For the most part, this is straightforward. I've added an intrinsic
and a matching ISD node just like those for nearbyint() and friends. The
SelectionDAG pattern I've named frnd (because ISD::FP_ROUND has already claimed
fround).
This will be used by the PowerPC backend in a follow-up commit.
llvm-svn: 187926
Also remove checking of llvm.dbg.sp since it is not used in generating dwarf.
Current state of Finder:
DebugInfoFinder tries to list all debug info MDNodes used in a module. To
list debug info MDNodes used by an instruction, DebugInfoFinder provides
processDeclare, processValue and processLocation to handle DbgDeclareInst,
DbgValueInst and DbgLoc attached to instructions. processModule will go
through all DICompileUnits in llvm.dbg.cu and list debug info MDNodes
used by the CUs.
TODO:
1> Finder has a list of CUs, SPs, Types, Scopes and global variables. We
need to add a list of variables that are used by DbgDeclareInst and
DbgValueInst.
2> MDString fields should be null or isa<MDString> and MDNode fields should be
null or isa<MDNode>. We currently use empty string or int 0 to represent null.
3> Go though Verify functions and make sure that they check field types.
4> Clean up existing testing cases to remove llvm.dbg.sp and make sure each
testing case has a llvm.dbg.cu.
Re-apply r187609 with fix to pass ocaml binding. vmcore.ml generates a debug
location with scope being metadata !{}, in verifier we treat this as a null
scope.
llvm-svn: 187812
Function attributes are the future! So just query whether we want to realign the
stack directly from the function instead of through a random target options
structure.
llvm-svn: 187618
Also remove checking of llvm.dbg.sp since it is not used in generating dwarf.
Current state of Finder:
DebugInfoFinder tries to list all debug info MDNodes used in a module. To
list debug info MDNodes used by an instruction, DebugInfoFinder provides
processDeclare, processValue and processLocation to handle DbgDeclareInst,
DbgValueInst and DbgLoc attached to instructions. processModule will go
through all DICompileUnits in llvm.dbg.cu and list debug info MDNodes
used by the CUs.
TODO:
1> Finder has a list of CUs, SPs, Types, Scopes and global variables. We
need to add a list of variables that are used by DbgDeclareInst and
DbgValueInst.
2> MDString fields should be null or isa<MDString> and MDNode fields should be
null or isa<MDNode>. We currently use empty string or int 0 to represent null.
3> Go though Verify functions and make sure that they check field types.
4> Clean up existing testing cases to remove llvm.dbg.sp and make sure each
testing case has a llvm.dbg.cu.
llvm-svn: 187609
Call into ComputeMaskedBits to figure out which bits are set on both add
operands and determine if the value is a power-of-two-or-zero or not.
llvm-svn: 187445
It will now only convert the arguments / return value and call
the underlying function if the types are able to be bitcasted.
This avoids using fp<->int conversions that would occur before.
llvm-svn: 187444
Also always add DIType, DISubprogram and DIGlobalVariable to the list
in DebugInfoFinder without checking them, so we can verify them later
on.
llvm-svn: 187285
We used to call Verify before adding DICompileUnit to the list, and now we
remove the check and always add DICompileUnit to the list in DebugInfoFinder,
so we can verify them later on.
llvm-svn: 187237
robust. It now uses an InstVisitor and worklist to actually walk the
uses of the Alloca transitively and detect the pattern which we can
directly promote: loads & stores of the whole alloca and instructions we
can completely ignore.
Also, with this new implementation teach both the predicate for testing
whether we can promote and the promotion engine itself to use the same
code so we no longer have strange divergence between the two code paths.
I've added some silly test cases to demonstrate that we can handle
slightly more degenerate code patterns now. See the below for why this
is even interesting.
Performance impact: roughly 1% regression in the performance of SROA or
ScalarRepl on a large C++-ish test case where most of the allocas are
basically ready for promotion. The reason is because of silly redundant
work that I've left FIXMEs for and which I'll address in the next
commit. I wanted to separate this commit as it changes the behavior.
Once the redundant work in removing the dead uses of the alloca is
fixed, this code appears to be faster than the old version. =]
So why is this useful? Because the previous requirement for promotion
required a *specific* visit pattern of the uses of the alloca to verify:
we *had* to look for no more than 1 intervening use. The end goal is to
have SROA automatically detect when an alloca is already promotable and
directly hand it to the mem2reg machinery rather than trying to
partition and rewrite it. This is a 25% or more performance improvement
for SROA, and a significant chunk of the delta between it and
ScalarRepl. To get there, we need to make mem2reg actually capable of
promoting allocas which *look* promotable to SROA without have SROA do
tons of work to massage the code into just the right form.
This is actually the tip of the iceberg. There are tremendous potential
savings we can realize here by de-duplicating work between mem2reg and
SROA.
llvm-svn: 187191
Also avoid locals evicting locals just because they want a cheaper register.
Problem: MI Sched knows exactly how many registers we have and assumes
they can be colored. In cases where we have large blocks, usually from
unrolled loops, greedy coloring fails. This is a source of
"regressions" from the MI Scheduler on x86. I noticed this issue on
x86 where we have long chains of two-address defs in the same live
range. It's easy to see this in matrix multiplication benchmarks like
IRSmk and even the unit test misched-matmul.ll.
A fundamental difference between the LLVM register allocator and
conventional graph coloring is that in our model a live range can't
discover its neighbors, it can only verify its neighbors. That's why
we initially went for greedy coloring and added eviction to deal with
the hard cases. However, for singly defined and two-address live
ranges, we can optimally color without visiting neighbors simply by
processing the live ranges in instruction order.
Other beneficial side effects:
It is much easier to understand and debug regalloc for large blocks
when the live ranges are allocated in order. Yes, global allocation is
still very confusing, but it's nice to be able to comprehend what
happened locally.
Heuristics could be added to bias register assignment based on
instruction locality (think late register pairing, banks...).
Intuituvely this will make some test cases that are on the threshold
of register pressure more stable.
llvm-svn: 187139
Make sure the context and type fields are MDNodes. We will generate
verification errors if those fields are non-empty strings.
Fix testing cases to make them pass the verifier.
llvm-svn: 187106
The language reference says that:
"If a symbol appears in the @llvm.used list, then the compiler,
assembler, and linker are required to treat the symbol as if there is
a reference to the symbol that it cannot see"
Since even the linker cannot see the reference, we must assume that
the reference can be using the symbol table. For example, a user can add
__attribute__((used)) to a debug helper function like dump and use it from
a debugger.
llvm-svn: 187103
schedule an alloca for another iteration in SROA. This only showed up
with a mixture of promotable and unpromotable selects and phis. Added
a test case for this.
llvm-svn: 187031
pending speculation for a phi node. The problem here is that we were
using growth of the specluation set as an indicator of whether
speculation would occur, and if the phi node is already in the set we
don't see it grow. This is a symptom of the fact that this signal is
a total hack.
Unfortunately, I couldn't really come up with a non-hacky way of
signaling that promotion remains valid *after* speculation occurs, such
that we only speculate when all else looks good for promotion. In the
end, I went with at least a much more explicit approach of doing the
work of queuing inside the phi and select processing and setting
a preposterously named flag to convey that we're in the special state of
requiring speculating before promotion.
Thanks to Richard Trieu and Nick Lewycky for the excellent work reducing
a testcase for this from a pretty giant, nasty assert in a big
application. =] The testcase was excellent.
llvm-svn: 187029
MDNodes used by DbgDeclareInst and DbgValueInst.
Another 16 testing cases failed and they are disabled with
-disable-debug-info-verifier.
A total of 34 cases are disabled with -disable-debug-info-verifier and will be
corrected.
llvm-svn: 186902
GlobalOpt simplifies llvm.compiler.used by removing any members that are also
in the more strict llvm.used. Handle the special case where llvm.compiler.used
becomes empty.
llvm-svn: 186778
We were incorrectly using compiler_used instead of compiler.used. Unfortunately
the passes using the broken name had tests also using the broken name.
llvm-svn: 186705
SROA.
The crux of the issue is that now we track uses of a partition of the
alloca in two places: the iterators over the partitioning uses and the
previously collected split uses vector. We weren't accounting for the
fact that the split uses might invalidate integer widening in ways other
than due to their width (in this case due to being volatile).
Further reduced testcase added to the tests.
llvm-svn: 186655
end of a vector. This was found with ASan. I've had one other report of
a crasher, but thus far been unable to reproduce the crash. It may well
be fixed with this version, and if not I'd like to get more information
from the build bots about what is happening.
See r186316 for the full commit log for the new implementation of the
SROA algorithm.
llvm-svn: 186565
Duncan pointed out a mistake in my fix in r186425 when only one of the allocas
being compared had the target-default alignment. This is essentially his
suggested solution. Thanks!
llvm-svn: 186510
For safety, the inliner cannot decrease the allignment on an alloca when
merging it with another.
I've included two variants of the test case for this: one with DataLayout
available, and one without. When DataLayout is not available, if only one of
the allocas uses the default alignment (getAlignment() == 0), then they cannot
be safely merged.
llvm-svn: 186425
a bot.
This reverts the commit which introduced a new implementation of the
fancy SROA pass designed to reduce its overhead. I'll skip the huge
commit log here, refer to r186316 if you're looking for how this all
works and why it works that way.
llvm-svn: 186332
different core implementation strategy.
Previously, SROA would build a relatively elaborate partitioning of an
alloca, associate uses with each partition, and then rewrite the uses of
each partition in an attempt to break apart the alloca into chunks that
could be promoted. This was very wasteful in terms of memory and compile
time because regardless of how complex the alloca or how much we're able
to do in breaking it up, all of the datastructure work to analyze the
partitioning was done up front.
The new implementation attempts to form partitions of the alloca lazily
and on the fly, rewriting the uses that make up that partition as it
goes. This has a few significant effects:
1) Much simpler data structures are used throughout.
2) No more double walk of the recursive use graph of the alloca, only
walk it once.
3) No more complex algorithms for associating a particular use with
a particular partition.
4) PHI and Select speculation is simplified and happens lazily.
5) More precise information is available about a specific use of the
alloca, removing the need for some side datastructures.
Ultimately, I think this is a much better implementation. It removes
about 300 lines of code, but arguably removes more like 500 considering
that some code grew in the process of being factored apart and cleaned
up for this all to work.
I've re-used as much of the old implementation as possible, which
includes the lion's share of code in the form of the rewriting logic.
The interesting new logic centers around how the uses of a partition are
sorted, and split into actual partitions.
Each instruction using a pointer derived from the alloca gets
a 'Partition' entry. This name is totally wrong, but I'll do a rename in
a follow-up commit as there is already enough churn here. The entry
describes the offset range accessed and the nature of the access. Once
we have all of these entries we sort them in a very specific way:
increasing order of begin offset, followed by whether they are
splittable uses (memcpy, etc), followed by the end offset or whatever.
Sorting by splittability is important as it simplifies the collection of
uses into a partition.
Once we have these uses sorted, we walk from the beginning to the end
building up a range of uses that form a partition of the alloca.
Overlapping unsplittable uses are merged into a single partition while
splittable uses are broken apart and carried from one partition to the
next. A partition is also introduced to bridge splittable uses between
the unsplittable regions when necessary.
I've looked at the performance PRs fairly closely. PR15471 no longer
will even load (the module is invalid). Not sure what is up there.
PR15412 improves by between 5% and 10%, however it is nearly impossible
to know what is holding it up as SROA (the entire pass) takes less time
than reading the IR for that test case. The analysis takes the same time
as running mem2reg on the final allocas. I suspect (without much
evidence) that the new implementation will scale much better however,
and it is just the small nature of the test cases that makes the changes
small and noisy. Either way, it is still simpler and cleaner I think.
llvm-svn: 186316
This conversion was done with the following bash script:
find test/Transforms -name "*.ll" | \
while read NAME; do
echo "$NAME"
if ! grep -q "^; *RUN: *llc" $NAME; then
TEMP=`mktemp -t temp`
cp $NAME $TEMP
sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \
while read FUNC; do
sed -i '' "s/;\(.*\)\([A-Za-z0-9_]*\):\( *\)define\([^@]*\)@$FUNC\([( ]*\)\$/;\1\2-LABEL:\3define\4@$FUNC(/g" $TEMP
done
mv $TEMP $NAME
fi
done
llvm-svn: 186269
This update was done with the following bash script:
find test/Transforms -name "*.ll" | \
while read NAME; do
echo "$NAME"
if ! grep -q "^; *RUN: *llc" $NAME; then
TEMP=`mktemp -t temp`
cp $NAME $TEMP
sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \
while read FUNC; do
sed -i '' "s/;\(.*\)\([A-Za-z0-9_]*\):\( *\)@$FUNC\([( ]*\)\$/;\1\2-LABEL:\3@$FUNC(/g" $TEMP
done
mv $TEMP $NAME
fi
done
llvm-svn: 186268
If an outside loop user of the reduction value uses the header phi node we
cannot just reduce the vectorized phi value in the vector code epilog because
we would loose VF-1 reductions.
lp:
p = phi (0, lv)
lv = lv + 1
...
brcond , lp, outside
outside:
usr = add 0, p
(Say the loop iterates two times, the value of p coming out of the loop is one).
We cannot just transform this to:
vlp:
p = phi (<0,0>, lv)
lv = lv + <1,1>
..
brcond , lp, outside
outside:
p_reduced = p[0] + [1];
usr = add 0, p_reduced
(Because the original loop iterated two times the vectorized loop would iterate
one time, but p_reduced ends up being zero instead of one).
We would have to execute VF-1 iterations in the scalar remainder loop in such
cases. For now, just disable vectorization.
PR16522
llvm-svn: 186256
In general, one should always complete CFG modifications first, update
CFG-based analyses, like Dominatores and LoopInfo, then generate
instruction sequences.
LoopVectorizer was creating a new loop, calling SCEVExpander to
generate checks, then updating LoopInfo. I just changed the order.
llvm-svn: 186241
Fixes a 35% degradation compared to unvectorized code in
MiBench/automotive-susan and an equally serious regression on a private
image processing benchmark.
radar://14351991
llvm-svn: 186188
against a constant."
This reverts commit r186107. It didn't handle wrapping arithmetic in the
loop correctly and thus caused the following C program to count from
0 to UINT64_MAX instead of from 0 to 255 as intended:
#include <stdio.h>
int main() {
unsigned char first = 0, last = 255;
do { printf("%d\n", first); } while (first++ != last);
}
Full test case and instructions to reproduce with just the -indvars pass
sent to the original review thread rather than to r186107's commit.
llvm-svn: 186152
Before we could vectorize PHINodes scanning successors was a good way of finding candidates. Now we can vectorize the phinodes which is simpler.
llvm-svn: 186139
Patch by Michele Scandale!
Adds a special handling of the case where, during the loop exit
condition rewriting, the exit value is a constant of bitwidth lower
than the type of the induction variable: instead of introducing a
trunc operation in order to match correctly the operand types, it
allows to convert the constant value to an equivalent constant,
depending on the initial value of the induction variable and the trip
count, in order have an equivalent comparison between the induction
variable and the new constant.
llvm-svn: 186107
We can vectorize them because in the case where we wrap in the address space the
unvectorized code would have had to access a pointer value of zero which is
undefined behavior in address space zero according to the LLVM IR semantics.
(Thank you Duncan, for pointing this out to me).
Fixes PR16592.
llvm-svn: 186088
predecessors of the two blocks it is attempting to merge supply the
same incoming values to any phi in the successor block. This change
allows merging in the case where there is one or more incoming values
that are undef. The undef values are rewritten to match the non-undef
value that flows from the other edge. Patch by Mark Lacey.
llvm-svn: 186069
Without the changes introduced into this patch, if TRE saw any allocas at all,
TRE would not perform TRE *or* mark callsites with the tail marker.
Because TRE runs after mem2reg, this inadequacy is not a death sentence. But
given a callsite A without escaping alloca argument, A may not be able to have
the tail marker placed on it due to a separate callsite B having a write-back
parameter passed in via an argument with the nocapture attribute.
Assume that B is the only other callsite besides A and B only has nocapture
escaping alloca arguments (*NOTE* B may have other arguments that are not passed
allocas). In this case not marking A with the tail marker is unnecessarily
conservative since:
1. By assumption A has no escaping alloca arguments itself so it can not
access the caller's stack via its arguments.
2. Since all of B's escaping alloca arguments are passed as parameters with
the nocapture attribute, we know that B does not stash said escaping
allocas in a manner that outlives B itself and thus could be accessed
indirectly by A.
With the changes introduced by this patch:
1. If we see any escaping allocas passed as a capturing argument, we do
nothing and bail early.
2. If we do not see any escaping allocas passed as captured arguments but we
do see escaping allocas passed as nocapture arguments:
i. We do not perform TRE to avoid PR962 since the code generator produces
significantly worse code for the dynamic allocas that would be created
by the TRE algorithm.
ii. If we do not return twice, mark call sites without escaping allocas
with the tail marker. *NOTE* This excludes functions with escaping
nocapture allocas.
3. If we do not see any escaping allocas at all (whether captured or not):
i. If we do not have usage of setjmp, mark all callsites with the tail
marker.
ii. If there are no dynamic/variable sized allocas in the function,
attempt to perform TRE on all callsites in the function.
Based off of a patch by Nick Lewycky.
rdar://14324281.
llvm-svn: 186057
(add nsw x, (and x, y)) isn't a power of two if x is zero, it's zero
(add nsw x, (xor x, y)) isn't a power of two if y has bits set that aren't set in x
llvm-svn: 185954
The following transforms are valid if -C is a power of 2:
(icmp ugt (xor X, C), ~C) -> (icmp ult X, C)
(icmp ult (xor X, C), -C) -> (icmp uge X, C)
These are nice, they get rid of the xor.
llvm-svn: 185915
Back in r179493 we determined that two transforms collided with each
other. The fix back then was to reorder the transforms so that the
preferred transform would give it a try and then we would try the
secondary transform. However, it was noted that the best approach would
canonicalize one transform into the other, removing the collision and
allowing us to optimize IR given to us in that form.
llvm-svn: 185808
This is a complete re-write if the bottom-up vectorization class.
Before this commit we scanned the instruction tree 3 times. First in search of merge points for the trees. Second, for estimating the cost. And finally for vectorization.
There was a lot of code duplication and adding the DCE exposed bugs. The new design is simpler and DCE was a part of the design.
In this implementation we build the tree once. After that we estimate the cost by scanning the different entries in the constructed tree (in any order). The vectorization phase also works on the built tree.
llvm-svn: 185774
This transform was originally added in r185257 but later removed in
r185415. The original transform would create instructions speculatively
and then discard them if the speculation was proved incorrect. This has
been replaced with a scheme that splits the transform into two parts:
preflight and fold. While we preflight, we build up fold actions that
inform the folding stage on how to act.
llvm-svn: 185667
This allows us to create switches even if instcombine has munged two of the
incombing compares into one and some bit twiddling. This was motivated by enum
compares that are common in clang.
llvm-svn: 185632
This implies annotating it as nounwind and its arguments as nocapture. To be
conservative, we do not annotate the arguments with noalias since some platforms
do not have restrict on the declaration for gettimeofday.
llvm-svn: 185502
I'm reverting this commit because:
1. As discussed during review, it needs to be rewritten (to avoid creating and
then deleting instructions).
2. This is causing optimizer crashes. Specifically, I'm seeing things like
this:
While deleting: i1 %
Use still stuck around after Def is destroyed: <badref> = select i1 <badref>, i32 0, i32 1
opt: /src/llvm-trunk/lib/IR/Value.cpp:79: virtual llvm::Value::~Value(): Assertion `use_empty() && "Uses remain when a value is destroyed!"' failed.
I'd guess that these will go away once we're no longer creating/deleting
instructions here, but just in case, I'm adding a regression test.
Because the code is bring rewritten, I've just XFAIL'd the original regression test. Original commit message:
InstCombine: Be more agressive optimizing 'udiv' instrs with 'select' denoms
Real world code sometimes has the denominator of a 'udiv' be a
'select'. LLVM can handle such cases but only when the 'select'
operands are symmetric in structure (both select operands are a constant
power of two or a left shift, etc.). This falls apart if we are dealt a
'udiv' where the code is not symetric or if the select operands lead us
to more select instructions.
Instead, we should treat the LHS and each select operand as a distinct
divide operation and try to optimize them independently. If we can
to simplify each operation, then we can replace the 'udiv' with, say, a
'lshr' that has a new select with a bunch of new operands for the
select.
llvm-svn: 185415
Math functions are mark as readonly because they read the floating point
rounding mode. Because we don't vectorize loops that would contain function
calls that set the rounding mode it is safe to ignore this memory read.
llvm-svn: 185299
Changing the sign when comparing the base pointer would introduce all
sorts of unexpected things like:
%gep.i = getelementptr inbounds [1 x i8]* %a, i32 0, i32 0
%gep2.i = getelementptr inbounds [1 x i8]* %b, i32 0, i32 0
%cmp.i = icmp ult i8* %gep.i, %gep2.i
%cmp.i1 = icmp ult [1 x i8]* %a, %b
%cmp = icmp ne i1 %cmp.i, %cmp.i1
ret i1 %cmp
into:
%cmp.i = icmp slt [1 x i8]* %a, %b
%cmp.i1 = icmp ult [1 x i8]* %a, %b
%cmp = xor i1 %cmp.i, %cmp.i1
ret i1 %cmp
By preserving the original sign, we now get:
ret i1 false
This fixes PR16483.
llvm-svn: 185259
Real world code sometimes has the denominator of a 'udiv' be a
'select'. LLVM can handle such cases but only when the 'select'
operands are symmetric in structure (both select operands are a constant
power of two or a left shift, etc.). This falls apart if we are dealt a
'udiv' where the code is not symetric or if the select operands lead us
to more select instructions.
Instead, we should treat the LHS and each select operand as a distinct
divide operation and try to optimize them independently. If we can
to simplify each operation, then we can replace the 'udiv' with, say, a
'lshr' that has a new select with a bunch of new operands for the
select.
llvm-svn: 185257
We may, after other optimizations, find ourselves with IR that looks
like:
%shl = shl i32 1, %y
%cmp = icmp ult i32 %shl, 32
Instead, we should just compare the shift count:
%cmp = icmp ult i32 %y, 5
llvm-svn: 185242
To support this we have to insert 'extractelement' instructions to pick the right lane.
We had this functionality before but I removed it when we moved to the multi-block design because it was too complicated.
llvm-svn: 185230
- lit tests verify that each line of input LLVM IR gets a !dbg node and a
corresponding entry of metadata that contains the line number
- unit tests verify that DebugIR works as advertised in the interface
- refactored some useful IR generation functionality from the MCJIT unit tests
so it can be reused
llvm-svn: 185212
No functionality change.
It should suffice to check the type of a debug info metadata, instead of
calling Verify. For cases where we know the type of a DI metadata, use
assert.
Also update testing cases to make them conform to the format of DI classes.
llvm-svn: 185135
When we store values for reversed induction stores we must not store the
reversed value in the vectorized value map. Another instruction might use this
value.
This fixes 3 test cases of PR16455.
llvm-svn: 185051
The Builtin attribute is an attribute that can be placed on function call site that signal that even though a function is declared as being a builtin,
rdar://problem/13727199
llvm-svn: 185049
When a 1-element vector alloca is promoted, a store instruction can often be
rewritten without converting the value to a scalar and using an insertelement
instruction to stuff it into the new alloca. This patch just adds a check
to skip that conversion when it is unnecessary. This turns out to be really
important for some ARM Neon operations where <1 x i64> is used to get around
the fact that i64 is not a legal type.
llvm-svn: 184870
This should hopefully have fixed the stage2/stage3 miscompare on the dragonegg
testers.
"LoopVectorize: Use the dependence test utility class
We now no longer need alias analysis - the cases that alias analysis would
handle are now handled as accesses with a large dependence distance.
We can now vectorize loops with simple constant dependence distances.
for (i = 8; i < 256; ++i) {
a[i] = a[i+4] * a[i+8];
}
for (i = 8; i < 256; ++i) {
a[i] = a[i-4] * a[i-8];
}
We would be able to vectorize about 200 more loops (in many cases the cost model
instructs us no to) in the test suite now. Results on x86-64 are a wash.
I have seen one degradation in ammp. Interestingly, the function in which we
now vectorize a loop is never executed so we probably see some instruction
cache effects. There is a 2% improvement in h264ref. There is one or the other
TSCV loop kernel that speeds up.
radar://13681598"
llvm-svn: 184724
We now no longer need alias analysis - the cases that alias analysis would
handle are now handled as accesses with a large dependence distance.
We can now vectorize loops with simple constant dependence distances.
for (i = 8; i < 256; ++i) {
a[i] = a[i+4] * a[i+8];
}
for (i = 8; i < 256; ++i) {
a[i] = a[i-4] * a[i-8];
}
We would be able to vectorize about 200 more loops (in many cases the cost model
instructs us no to) in the test suite now. Results on x86-64 are a wash.
I have seen one degradation in ammp. Interestingly, the function in which we
now vectorize a loop is never executed so we probably see some instruction
cache effects. There is a 2% improvement in h264ref. There is one or the other
TSCV loop kernel that speeds up.
radar://13681598
llvm-svn: 184685
Untill now we detected the vectorizable tree and evaluated the cost of the
entire tree. With this patch we can decide to trim-out branches of the tree
that are not profitable to vectorizer.
Also, increase the max depth from 6 to 12. In the worse possible case where all
of the code is made of diamond-shaped graph this can bring the cost to 2**10,
but diamonds are not very common.
llvm-svn: 184681
Rewrote the SLP-vectorization as a whole-function vectorization pass. It is now able to vectorize chains across multiple basic blocks.
It still does not vectorize PHIs, but this should be easy to do now that we scan the entire function.
I removed the support for extracting values from trees.
We are now able to vectorize more programs, but there are some serious regressions in many workloads (such as flops-6 and mandel-2).
llvm-svn: 184647
We collect gather sequences when we vectorize basic blocks. Gather sequences are excellent
hints for vectorization of other basic blocks.
llvm-svn: 184444
Prior to this change, the considered addressing modes may be invalid since the
maximum and minimum offsets were not taking into account.
This was causing an assertion failure.
The added test case exercices that behavior.
<rdar://problem/14199725> Assertion failed: (CurScaleCost >= 0 && "Legal
addressing mode has an illegal cost!")
llvm-svn: 184341
The type <3 x i8> is a common in graphics and we want to be able to vectorize it.
This changes accelerates bullet by 12% and 471_omnetpp by 5%.
llvm-svn: 184317
This pass was assuming that if hasAddressTaken() returns false for a
function, the function's only uses are call sites. That's not true
because there can be references by BlockAddresses too.
Fix the pass to handle this case. Fix
BlockAddress::replaceUsesOfWithOnConstant() to allow a function's type
to be changed by RAUW'ing the function with a bitcast of the recreated
function.
Patch by Mark Seaborn.
llvm-svn: 183933
Instead of a custom implementation of replaceAllUsesWith, we just call
replaceAllUsesWith and recreate llvm.used and llvm.compiler-used.
This change is particularity interesting because it makes llvm see
through what clang is doing with static used functions in extern "C"
contexts. With this change, running clang -O2 in
extern "C" {
__attribute__((used)) static void foo() {}
}
produces
@llvm.used = appending global [1 x i8*] [i8* bitcast (void ()* @foo to
i8*)], section "llvm.metadata"
define internal void @foo() #0 {
entry:
ret void
}
llvm-svn: 183756
r183584 tries to derive some info from the code *AFTER* a call and apply
these derived info to the code *BEFORE* the call, which is not always safe
as the call in question may never return, and in this case, the derived
info is invalid.
Thank Duncan for pointing out this potential bug.
rdar://14073661
llvm-svn: 183606
Manman Ren