Summary:
The typo has been present since memOpsHaveSameBasePtr was introduced in
r313208.
It caused SIInstrInfo::shouldClusterMemOps to cluster more mem ops than
it was supposed to.
Subscribers: arsenm, kzhuravl, jvesely, wdng, nhaehnle, yaxunl, dstuttard, tpr, t-tye, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71616
There were 2 problems here. First, these patterns were duplicated to
handle the inverted shift operands instead of using the commuted
PatFrags.
Second, the point of the zext folding patterns don't apply to the
non-0ing high subtargets. They should be skipped instead of inserting
the extension. The zeroing high code would be emitted when necessary
anyway. This was also emitting unnecessary zexts in cases where the
high bits were undefined.
llvm-svn: 374092
Detect dead lanes can create some dead defs. Then RenameIndependentSubregs
will break a REG_SEQUENCE which may use these dead defs. At this point
a dead instruction can be removed but we do not run a DCE anymore.
MachineDCE was only running before live variable analysis. The patch
adds a mean to preserve LiveIntervals and SlotIndexes in case it works
past this.
Differential Revision: https://reviews.llvm.org/D59626
llvm-svn: 357805
Summary:
The VirtReg2Value mapping is crucial for getting consistently
reliable divergence information into the SelectionDAG. This
patch fixes a bunch of issues that lead to incorrect divergence
info and introduces tight assertions to ensure we don't regress:
1. VirtReg2Value is generated lazily; there were some cases where
a lookup was performed before all relevant virtual registers were
created, leading to an out-of-sync mapping. Those cases were:
- Complex code to lower formal arguments that generated CopyFromReg
nodes from live-in registers (fixed by never querying the mapping
for live-in registers).
- Code that generates CopyToReg for formal arguments that are used
outside the entry basic block (fixed by never querying the
mapping for Register nodes, which don't need the divergence info
anyway).
2. For complex values that are lowered to a sequence of registers,
all registers must be reflected in the VirtReg2Value mapping.
I am not adding any new tests, since I'm not actually aware of any
bugs that these problems are causing with trunk as-is. However,
I recently added a test case (in r346423) which fails when D53283 is
applied without this change. Also, the new assertions should provide
most of the effective test coverage.
There is one test change in sdwa-peephole.ll. The underlying issue
is that since the divergence info is now correct, the DAGISel will
select V_OR_B32 directly instead of S_OR_B32. This leads to an extra
COPY which affects the behavior of MachineLICM in a way that ends up
with the S_MOV_B32 with the constant in a different basic block than
the V_OR_B32, which is presumably what defeats the peephole.
Reviewers: alex-t, arsenm, rampitec
Subscribers: kzhuravl, jvesely, wdng, yaxunl, dstuttard, tpr, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D54340
llvm-svn: 348049
This usually results in better code. Fixes using
inline asm with short2, and also fixes having a different
ABI for function parameters between VI and gfx9.
Partially cleans up the mess used for lowering of the d16
operations. Making v4f16 legal will help clean this up more,
but this requires additional work.
llvm-svn: 332953
Summary:
Added support based on merged SDWA pseudo instructions. Now peephole allow one scalar operand, omod and clamp modifiers.
Added several subtarget features for GFX9 SDWA.
This diff also contains changes from D34026.
Depends D34026
Reviewers: vpykhtin, rampitec, arsenm
Subscribers: kzhuravl, wdng, nhaehnle, yaxunl, dstuttard, tpr, t-tye
Differential Revision: https://reviews.llvm.org/D34241
llvm-svn: 305986
Remove dependency of SDWA pass on SIShrinkInstructions.
The goal is to move SDWA even higher in the stack to avoid second run
of MachineLICM, MachineCSE and SIFoldOperands.
Also added handling to preserve original src modifiers.
Differential Revision: https://reviews.llvm.org/D33860
llvm-svn: 304665
An encoding does not allow to use SDWA in an instruction with
scalar operands, either literals or SGPRs. That is however possible
to copy these operands into a VGPR first.
Several copies of the value are produced if multiple SDWA conversions
were done. To cleanup MachineLICM (to hoist copies out of loops),
MachineCSE (to remove duplicate copies) and SIFoldOperands (to replace
SGPR to VGPR copy with immediate copy right to the VGPR) runs are added
after the SDWA pass.
Differential Revision: https://reviews.llvm.org/D33583
llvm-svn: 304219
Summary:
There should be no intesection between SDWA operands and potential MIs. E.g.:
```
v_and_b32 v0, 0xff, v1 -> src:v1 sel:BYTE_0
v_and_b32 v2, 0xff, v0 -> src:v0 sel:BYTE_0
v_add_u32 v3, v4, v2
```
In that example it is possible that we would fold 2nd instruction into 3rd (v_add_u32_sdwa) and then try to fold 1st instruction into 2nd (that was already destroyed). So if SDWAOperand is also a potential MI then do not apply it.
Reviewers: vpykhtin, arsenm
Subscribers: kzhuravl, wdng, nhaehnle, yaxunl, dstuttard, tpr, t-tye
Differential Revision: https://reviews.llvm.org/D32804
llvm-svn: 303347
Add a new node to act as a fancy bitcast from f16 operations to
i32 that implicitly zero the high 16-bits of the result.
Alternatively could try making v2f16 legal and canonicalizing
on build_vectors.
llvm-svn: 299246
Previously compiler often extracted common immediates into specific register, e.g.:
```
%vreg0 = S_MOV_B32 0xff;
%vreg2 = V_AND_B32_e32 %vreg0, %vreg1
%vreg4 = V_AND_B32_e32 %vreg0, %vreg3
```
Because of this SDWA peephole failed to find SDWA convertible pattern. E.g. in previous example this could be converted into 2 SDWA src operands:
```
SDWA src: %vreg2 src_sel:BYTE_0
SDWA src: %vreg4 src_sel:BYTE_0
```
With this change peephole check if operand is either immediate or register that is copy of immediate.
llvm-svn: 299202
Currently the default C calling convention functions are treated
the same as compute kernels. Make this explicit so the default
calling convention can be changed to a non-kernel.
Converted with perl -pi -e 's/define void/define amdgpu_kernel void/'
on the relevant test directories (and undoing in one place that actually
wanted a non-kernel).
llvm-svn: 298444
Summary:
First iteration of SDWA peephole.
This pass tries to combine several instruction into one SDWA instruction. E.g. it converts:
'''
V_LSHRREV_B32_e32 %vreg0, 16, %vreg1
V_ADD_I32_e32 %vreg2, %vreg0, %vreg3
V_LSHLREV_B32_e32 %vreg4, 16, %vreg2
'''
Into:
'''
V_ADD_I32_sdwa %vreg4, %vreg1, %vreg3 dst_sel:WORD_1 dst_unused:UNUSED_PAD src0_sel:WORD_1 src1_sel:DWORD
'''
Pass structure:
1. Iterate over machine instruction in basic block and try to apply "SDWA patterns" to each of them. SDWA patterns match machine instruction into either source or destination SDWA operand. E.g. ''' V_LSHRREV_B32_e32 %vreg0, 16, %vreg1''' is matched to source SDWA operand '''%vreg1 src_sel:WORD_1'''.
2. Iterate over found SDWA operands and find instruction that could be potentially coverted into SDWA. E.g. for source SDWA operand potential instruction are all instruction in this basic block that uses '''%vreg0'''
3. Iterate over all potential instructions and check if they can be converted into SDWA.
4. Convert instructions to SDWA.
This review contains basic implementation of SDWA peephole pass. This pass requires additional testing fot both correctness and performance (no performance testing done).
There are several ways this pass can be improved:
1. Make this pass work on whole function not only basic block. As I can see this can be done right now without changes to pass.
2. Introduce more SDWA patterns
3. Introduce mnemonics to limit when SDWA patterns should apply
Reviewers: vpykhtin, alex-t, arsenm, rampitec
Subscribers: wdng, nhaehnle, mgorny
Differential Revision: https://reviews.llvm.org/D30038
llvm-svn: 298365
Matt Arsenault