Mach-O files don’t have size information about the symbols in the object file
format unlike ELF.
Also add the part of the fix to llvm-nm that was missed with r290001 so
-arch armv7m works.
rdar://25681018
llvm-svn: 293099
The Mach-O command line flag like "-arch armv7m" does not match the
arch name part of its llvm Triple which is "thumbv7m-apple-darwin”.
I think the best way to fix this is to have
llvm::object::MachOObjectFile::getArchTriple() optionally return the
name of the Mach-O arch flag that would be used with -arch that
matches the CPUType and CPUSubType. Then change
llvm::object::MachOUniversalBinary::ObjectForArch::getArchTypeName()
to use that and change it to getArchFlagName() as the type name is
really part of the Triple and the -arch flag name is a Mach-O thing
for a specific Triple with a specific Mcpu value.
rdar://29663637
llvm-svn: 290001
This allows us to remove a few uses of IRObjectFile::getSymbolGV() in
llvm-nm.
While here change host-dependent logic in llvm-nm to target-dependent
logic.
Differential Revision: https://reviews.llvm.org/D27075
llvm-svn: 288320
This patch fixes a small bug where symbols defined in the INIT
and FINI sections were incorrectly getting a type of 'n'.
Differential Revision: https://reviews.llvm.org/D26937
llvm-svn: 287803
Undefined and weak symbols don't have a meaningful size or value.
As such, nothing should be printed for those attributes (this is
already done for the address with 'U') with the BSD format. This
matches what GNU nm does.
Note that for the POSIX.2 format [1] zero values are still
printed for the size and value. This seems in spirit with
the format strings in that specification, but is debatable.
[1] http://pubs.opengroup.org/onlinepubs/9699919799/
Differential Revision: https://reviews.llvm.org/D26936
llvm-svn: 287802
llvm-nm.cpp has the following include chain:
llvm/IR/Function.h
llvm/IR/Argument.h
llvm/IR/Attributes.h
llvm/IR/Attributes.gen
This means llvm-nm needs to depend on intrinsics_gen.
llvm-svn: 287432
This is forcing to use Error::success(), which is in a wide majority
of cases a lot more readable.
Differential Revision: https://reviews.llvm.org/D26481
llvm-svn: 286561
The core of the change is supposed to be NFC, however it also fixes
what I believe was an undefined behavior when calling:
va_start(ValueArgs, Desc);
with Desc being a StringRef.
Differential Revision: https://reviews.llvm.org/D25342
llvm-svn: 283671
This is where an LC_SEGMENT load command has a fileoff field that
extends past the end of the file.
Also fix llvm-nm and llvm-size to remove the errorToErrorCode() call so error messages are printed.
And needed to update a few test cases now that they do print the error messages just a
bit differently.
llvm-svn: 277845
changing them to Expected<> to allow them to pass through llvm Errors.
No functional change.
This commit by itself will break the next lld builds. I’ll be committing the
matching change for lld immediately next.
llvm-svn: 277656
As mentioned in commit log for r276686 this next step is adding a new
method in the ArchiveMemberHeader class to get the full name that
does proper error checking, and can be use for error messages.
To do this the name of ArchiveMemberHeader::getName() is changed to
ArchiveMemberHeader::getRawName() to be consistent with
Archive::Child::getRawName(). Then the “new” method is the addition
of a new implementation of ArchiveMemberHeader::getName() which gets
the full name and provides proper error checking. Which is mostly a rewrite
of what was Archive::Child::getName() and cleaning up incorrect uses of
llvm_unreachable() in the code which were actually just cases of errors
in the input Archives.
Then Archive::Child::getName() is changed to return Expected<> and use
the new implementation of ArchiveMemberHeader::getName() .
Also needed to change Archive::getMemoryBufferRef() with these
changes to return Expected<> as well to propagate Errors up.
As well as changing Archive::isThinMember() to return Expected<> .
llvm-svn: 277177
See http://reviews.llvm.org/D22079
Changes the Archive::child_begin and Archive::children to require a reference
to an Error. If iterator increment fails (because the archive header is
damaged) the iterator will be set to 'end()', and the error stored in the
given Error&. The Error value should be checked by the user immediately after
the loop. E.g.:
Error Err;
for (auto &C : A->children(Err)) {
// Do something with archive child C.
}
// Check the error immediately after the loop.
if (Err)
return Err;
Failure to check the Error will result in an abort() when the Error goes out of
scope (as guaranteed by the Error class).
llvm-svn: 275316
and its clients to use the new llvm::Error model for error handling.
Changed getAsArchive() from ErrorOr<...> to Expected<...> so now all
interfaces there use the new llvm::Error model for return values.
In the two places it had if (!Parent) this is actually a program error so changed
from returning errorCodeToError(object_error::parse_failed) to calling
report_fatal_error() with a message.
In getObjectForArch() added error messages to its two llvm::Error return values
instead of returning errorCodeToError(object_error::arch_not_found) with no
error message.
For the llvm-obdump, llvm-nm and llvm-size clients since the only binary files in
Mach-O Universal Binaries that are supported are Mach-O files or archives with
Mach-O objects, updated their logic to generate an error when a slice contains
something like an ELF binary instead of ignoring it. And added a test case for
that.
The last error stuff to be cleaned up for libObject’s MachOUniversalBinary is
the use of errorOrToExpected(Archive::create(ObjBuffer)) which needs
Archive::create() to be changed from ErrorOr<...> to Expected<...> first,
which I’ll work on next.
llvm-svn: 274079
a good error message to be produced.
This is nearly the last libObject interface that used ErrorOr and the last one
that appears in llvm/include/llvm/Object/MachO.h . For Mach-O objects this is
just a clean up because it’s version of getSymbolAddress() can’t return an
error.
I will leave it to the experts on COFF and ELF to actually add meaning full
error messages in their tests if they wish. And also leave it to these experts
to change the last two ErrorOr interfaces in llvm/include/llvm/Object/ObjectFile.h
for createCOFFObjectFile() and createELFObjectFile() if they wish.
Since there are no test cases for COFF and ELF error cases with respect to
getSymbolAddress() in the test suite this is no functional change (NFC).
llvm-svn: 273701
looking for it along $PATH. This allows installs of LLVM tools outside of
$PATH to find the symbolizer and produce pretty backtraces if they crash.
llvm-svn: 272232
when the object is from a slice of a Mach-O Universal Binary use something like
"foo.o (for architecture i386)" as part of the error message when expected.
Also fixed places in these tools that were ignoring object file errors from
MachOUniversalBinary::getAsObjectFile() when the code moved on to see if
the slice was an archive.
To do this MachOUniversalBinary::getAsObjectFile() and
MachOUniversalBinary::getObjectForArch() were changed from returning
ErrorOr<...> to Expected<...> then that was threaded up to its users.
Converting these interfaces to Expected<> from ErrorOr<> does involve
touching a number of places. To contain the changes for now the use of
errorToErrorCode() is still used in two places yet to be fully converted.
llvm-svn: 271332
when the object is in an archive to use something like libx.a(foo.o) as part of
the error message.
Also changed llvm-objdump and llvm-size to be like llvm-nm and ignore non-object
files in archives and not produce any error message.
To do this Archive::Child::getAsBinary() was changed from ErrorOr<...> to
Expected<...> then that was threaded up to its users.
Converting this interface to Expected<> from ErrorOr<> does involve
touching a number of places. To contain the changes for now the use of
errorToErrorCode() is still used in one place yet to be fully converted.
Again there some were bugs in the existing code that did not deal with the
old ErrorOr<> return values. So now with Expected<> since they must be
checked and the error handled, I added a TODO and a comments for those.
llvm-svn: 269784
Produce another specific error message for a malformed Mach-O file when a symbol’s
section index is more than the number of sections. The existing test case in test/Object/macho-invalid.test
for macho-invalid-section-index-getSectionRawName now reports the error with the message indicating
that a symbol at a specific index has a bad section index and that bad section index value.
Again converting interfaces to Expected<> from ErrorOr<> does involve
touching a number of places. Where the existing code reported the error with a
string message or an error code it was converted to do the same.
Also there some were bugs in the existing code that did not deal with the
old ErrorOr<> return values. So now with Expected<> since they must be
checked and the error handled, I added a TODO and a comment:
"// TODO: Actually report errors helpfully" and a call something like
consumeError(NameOrErr.takeError()) so the buggy code will not crash
since needed to deal with the Error.
llvm-svn: 268298
Only one consumer (llvm-objdump) actually cared about the fact that there were
two triples. Others were actively working around the fact that the Triple
returned by getArch might have been invalid. As for llvm-objdump, it needs to
be acutely aware of both Triples anyway, so being generic in the exposed API is
no benefit.
Also rename the version of getArch returning a Triple. Users were having to
pass an unwanted nullptr to disambiguate the two, which was nasty.
The only functional change here is that armv7m and armv7em object files no
longer crash llvm-objdump.
llvm-svn: 267249
Produce another specific error message for a malformed Mach-O file when a symbol’s
string index is past the end of the string table. The existing test case in test/Object/macho-invalid.test
for macho-invalid-symbol-name-past-eof now reports the error with the message indicating
that a symbol at a specific index has a bad sting index and that bad string index value.
Again converting interfaces to Expected<> from ErrorOr<> does involve
touching a number of places. Where the existing code reported the error with a
string message or an error code it was converted to do the same. There is some
code for this that could be factored into a routine but I would like to leave that for
the code owners post-commit to do as they want for handling an llvm::Error. An
example of how this could be done is shown in the diff in
lib/ExecutionEngine/RuntimeDyld/RuntimeDyldImpl.h which had a Check() routine
already for std::error_code so I added one like it for llvm::Error .
Also there some were bugs in the existing code that did not deal with the
old ErrorOr<> return values. So now with Expected<> since they must be
checked and the error handled, I added a TODO and a comment:
“// TODO: Actually report errors helpfully” and a call something like
consumeError(NameOrErr.takeError()) so the buggy code will not crash
since needed to deal with the Error.
Note there fixes needed to lld that goes along with this that I will commit right after this.
So expect lld not to built after this commit and before the next one.
llvm-svn: 266919
Removed some unused headers, replaced some headers with forward class declarations.
Found using simple scripts like this one:
clear && ack --cpp -l '#include "llvm/ADT/IndexedMap.h"' | xargs grep -L 'IndexedMap[<]' | xargs grep -n --color=auto 'IndexedMap'
Patch by Eugene Kosov <claprix@yandex.ru>
Differential Revision: http://reviews.llvm.org/D19219
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 266595
At the same time, fixes InstructionsTest::CastInst unittest: yes
you can leave the IR in an invalid state and exit when you don't
destroy the context (like the global one), no longer now.
This is the first part of http://reviews.llvm.org/D19094
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 266379
Produce the first specific error message for a malformed Mach-O file describing
the problem instead of the generic message for object_error::parse_failed of
"Invalid data was encountered while parsing the file”. Many more good error
messages will follow after this first one.
This is built on Lang Hames’ great work of adding the ’Error' class for
structured error handling and threading Error through MachOObjectFile
construction. And making createMachOObjectFile return Expected<...> .
So to to get the error to the llvm-obdump tool, I changed the stack of
these methods to also return Expected<...> :
object::ObjectFile::createObjectFile()
object::SymbolicFile::createSymbolicFile()
object::createBinary()
Then finally in ParseInputMachO() in MachODump.cpp the error can
be reported and the specific error message can be printed in llvm-objdump
and can be seen in the existing test case for the existing malformed binary
but with the updated error message.
Converting these interfaces to Expected<> from ErrorOr<> does involve
touching a number of places. To contain the changes for now use of
errorToErrorCode() and errorOrToExpected() are used where the callers
are yet to be converted.
Also there some were bugs in the existing code that did not deal with the
old ErrorOr<> return values. So now with Expected<> since they must be
checked and the error handled, I added a TODO and a comment:
“// TODO: Actually report errors helpfully” and a call something like
consumeError(ObjOrErr.takeError()) so the buggy code will not crash
since needed to deal with the Error.
Note there is one fix also needed to lld/COFF/InputFiles.cpp that goes along
with this that I will commit right after this. So expect lld not to built
after this commit and before the next one.
llvm-svn: 265606
http://pubs.opengroup.org/onlinepubs/9699919799/utilities/nm.html .
1) For Mach-O files the code was not printing the values in hex as is the default.
2) The values printed had leading zeros which they should not have.
3) The address for undefined symbols was printed as spaces instead of 0.
4) With the -A option with posix output for an archive did not use square
brackets around the archive member name.
rdar://25311883 and rdar://25299678
llvm-svn: 264778
We already perform it at the beginning of the function so we can't
arrive here with an invalid object. Also, add a test so that bugs
won't sneak in the future.
llvm-svn: 258982
Summary:
This patch is provided in preparation for removing autoconf on 1/26. The proposal to remove autoconf on 1/26 was discussed on the llvm-dev thread here: http://lists.llvm.org/pipermail/llvm-dev/2016-January/093875.html
"I felt a great disturbance in the [build system], as if millions of [makefiles] suddenly cried out in terror and were suddenly silenced. I fear something [amazing] has happened."
- Obi Wan Kenobi
Reviewers: chandlerc, grosbach, bob.wilson, tstellarAMD, echristo, whitequark
Subscribers: chfast, simoncook, emaste, jholewinski, tberghammer, jfb, danalbert, srhines, arsenm, dschuff, jyknight, dsanders, joker.eph, llvm-commits
Differential Revision: http://reviews.llvm.org/D16471
llvm-svn: 258861
Kevin Enderby