Summary:
Visual Studio doesn't like it while stepping. It kicks you out of the
source view of the file being stepped through and tries to fall back to
the disassembly view.
Fixes PR43530
The fix is incomplete, because it's possible to have a basic block with
no source locations at all. In this case, we don't emit a .cv_loc, but
that will result in wrong stepping behavior in the debugger if the
layout predecessor of the location-less BB has an unrelated source
location. We could try harder to find a valid location that dominates or
post-dominates the current BB, but in general it's a dataflow problem,
and one still might not exist. I left a FIXME about this.
As an alternative, we might want to consider having the middle-end check
if its emitting codeview and get it to stop using line zero.
Reviewers: akhuang
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D68747
llvm-svn: 374267
As background, starting in D66309, I'm working on support unordered atomics analogous to volatile flags on normal LoadSDNode/StoreSDNodes for X86.
As part of that, I spent some time going through usages of LoadSDNode and StoreSDNode looking for cases where we might have missed a volatility check or need an atomic check. I couldn't find any cases that clearly miscompile - i.e. no test cases - but a couple of pieces in code loop suspicious though I can't figure out how to exercise them.
This patch adds defensive checks and asserts in the places my manual audit found. If anyone has any ideas on how to either a) disprove any of the checks, or b) hit the bug they might be fixing, I welcome suggestions.
Differential Revision: https://reviews.llvm.org/D68419
llvm-svn: 374261
In a future patch, this will help cleanup m0 handling.
The register coalescer handles copies from a register that
materializes an immediate, but doesn't handle move immediates
itself. The virtual register uses will often be allocated to the same
register, so there end up being no real copy.
llvm-svn: 374257
This was ignoring the register bank of the input pointer, and
isUniformMMO seems overly aggressive.
This will now conservatively assume a VGPR in cases where the incoming
bank hasn't been determined yet (i.e. is from a loop phi).
llvm-svn: 374255
If original instruction did not have source modifiers they were
not added to the new DPP instruction as well, even if needed.
Differential Revision: https://reviews.llvm.org/D68729
llvm-svn: 374241
Summary:
This is necessary and sufficient to get simple cases of multiple
return working with multivalue enabled. More complex cases will
require block and loop signatures to be generalized to potentially be
type indices as well.
Reviewers: aheejin, dschuff
Subscribers: sbc100, jgravelle-google, hiraditya, sunfish, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D68684
llvm-svn: 374235
in ExtBinary format
Currently for Text, Binary and ExtBinary format profiles, when we compile a
module with samplefdo, even if there is no function showing up in the profile,
we have to load all the function profiles from the profile input. That is a
waste of compile time.
CompactBinary format profile has already had the support of loading function
profiles on demand. In this patch, we add the support to load profile on
demand for ExtBinary format. It will work no matter the sections in ExtBinary
format profile are compressed or not. Experiment shows it reduces the time to
compile a server benchmark by 30%.
When profile remapping and loading function profiles on demand are both used,
extra work needs to be done so that the loading on demand process will take
the name remapping into consideration. It will be addressed in a follow-up
patch.
Differential Revision: https://reviews.llvm.org/D68601
llvm-svn: 374233
Add own version of the mathematical constants from the upcoming C++20 `std::numbers`.
Differential revision: https://reviews.llvm.org/D68257
llvm-svn: 374207
Re-apply 9fdfb045ae8b/r365676 with fixes for PPC and Hexagon. This involved
moving defaults from TargetTransformInfoImplBase to MCSubtargetInfo.
Rework the TTI cache and software prefetching APIs to prepare for the
introduction of a general system model. Changes include:
- Marking existing interfaces const and/or override as appropriate
- Adding comments
- Adding BasicTTIImpl interfaces that delegate to a subtarget
implementation
- Moving the default TargetTransformInfoImplBase implementation to a default
MCSubtarget implementation
Only a handful of targets use these interfaces currently: AArch64, Hexagon, PPC
and SystemZ. AArch64 already has a custom subtarget implementation, so its
custom TTI implementation is migrated to use the new facilities in BasicTTIImpl
to invoke its custom subtarget implementation. The custom TTI implementations
continue to exist for the other targets with this change. They are not moved
over to subtarget-based implementations.
The end goal is to have the default subtarget implementation defer to the system
model defined by the target. With this change, the default MCSubtargetInfo
implementation essentially returns the defaults TargetTransformInfoImplBase used
to return. Existing users of TTI defaults will hit the defaults now in
MCSubtargetInfo. Targets that define their own custom TTI implementations won't
use the BasicTTIImpl implementations that route to the subtarget.
Once system models are in place for the targets that use these interfaces, their
custom TTI implementations can be removed.
Differential Revision: https://reviews.llvm.org/D63614
llvm-svn: 374205
(specifying an underlying type for the enum might also be suitable - but
this seems better/as good, since there's a clear expectation this can
contain values other than the actual enumerators of this enum)
llvm-svn: 374196
Summary:
This clang builtin and corresponding LLVM intrinsic are necessary to
expose the exact semantics of the underlying WebAssembly instruction
to users. LLVM produces a poison value if the dynamic swizzle indices
are greater than the vector size, but the WebAssembly instruction sets
the corresponding output lane to zero. Users who depend on this
behavior can safely use this builtin.
Depends on D68527.
Reviewers: aheejin, dschuff
Subscribers: sbc100, jgravelle-google, hiraditya, sunfish, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D68531
llvm-svn: 374189
Summary:
Adds the new v8x16.swizzle SIMD instruction as specified at
https://github.com/WebAssembly/simd/blob/master/proposals/simd/SIMD.md#swizzling-using-variable-indices.
In addition to adding swizzles as a candidate lowering in
LowerBUILD_VECTOR, also rewrites and simplifies the lowering to
minimize the number of replace_lanes necessary rather than trying to
minimize code size. This leads to more uses of v128.const instead of
splats, which is expected to increase performance.
The new code will be easier to tune once V8 implements all the vector
construction operations, and it will also be easier to add new
candidate instructions in the future if necessary.
Reviewers: aheejin, dschuff
Subscribers: sbc100, jgravelle-google, hiraditya, sunfish, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D68527
llvm-svn: 374188
We failed to account for the target register width (max vector factor)
when vectorizing starting from GEPs. This causes vectorization to
proceed to obviously illegal widths as in:
https://bugs.llvm.org/show_bug.cgi?id=43578
For x86, this also means that SLP can produce rogue AVX or AVX512
code even when the user specifies a narrower vector width.
The AArch64 test in ext-trunc.ll appears to be better using the
narrower width. I'm not exactly sure what getelementptr.ll is trying
to do, but it's testing with "-slp-threshold=-18", so I'm not worried
about those diffs. The x86 test is an over-reduction from SPEC h264;
this patch appears to restore the perf loss caused by SLP when using
-march=haswell.
Differential Revision: https://reviews.llvm.org/D68667
llvm-svn: 374183
stack
This patch makes sure that if we tag some memory, we untag that memory before
the function returns/throws via any exit, reachable from the tag operation. For
that we place the untag operation either at:
a) the lifetime end call for the alloca, if that call post-dominates the
lifetime start call (where the tag operation is placed), or it (the
lifetime end call) dominates all reachable exits, otherwise
b) at the reachable exits
Differential Revision: https://reviews.llvm.org/D68469
llvm-svn: 374182
Summary:
The rule for the moveAllAfterMergeBlocks API si for all instructions
from `From` to have been moved to `To`, while keeping the CFG edges (and
block terminators) unchanged.
Update all the callsites for moveAllAfterMergeBlocks to follow this.
Pending follow-up: since the same behavior is needed everytime, merge
all callsites into one. The common denominator may be the call to
`MergeBlockIntoPredecessor`.
Resolves PR43569.
Reviewers: george.burgess.iv
Subscribers: Prazek, sanjoy.google, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D68659
llvm-svn: 374177
When optimising for size and SCEV runtime checks need to be emitted to check
overflow behaviour, the loop vectorizer can run in this assert:
LoopVectorize.cpp:2699: void llvm::InnerLoopVectorizer::emitSCEVChecks(
llvm::Loop *, llvm::BasicBlock *): Assertion `!BB->getParent()->hasOptSize()
&& "Cannot SCEV check stride or overflow when opt
We should not generate predicates while optimising for size because
code will be generated for predicates such as these SCEV overflow runtime
checks.
This should fix PR43371.
Differential Revision: https://reviews.llvm.org/D68082
llvm-svn: 374166
The `expandLoadImmReal` handles four different and almost non-overlapping
cases: loading a "single" float immediate into a GPR, loading a "single"
float immediate into a FPR, and the same couple for a "double" float
immediate.
It's better to move each `else if` branch into separate methods.
llvm-svn: 374164
David added the JamCRC implementation in r246590. More recently, Eugene
added a CRC-32 implementation in r357901, which falls back to zlib's
crc32 function if present.
These checksums are essentially the same, so having multiple
implementations seems unnecessary. This replaces the CRC-32
implementation with the simpler one from JamCRC, and implements the
JamCRC interface in terms of CRC-32 since this means it can use zlib's
implementation when available, saving a few bytes and potentially making
it faster.
JamCRC took an ArrayRef<char> argument, and CRC-32 took a StringRef.
This patch changes it to ArrayRef<uint8_t> which I think is the best
choice, and simplifies a few of the callers nicely.
Differential revision: https://reviews.llvm.org/D68570
llvm-svn: 374148
Summary:
While working with DagInit's, it's often the case that you expect the
operator to be a reference to a def. This patch adds a wrapper for this
common case to reduce the amount of boilerplate callers need to duplicate
repeatedly.
getOperatorAsDef() returns the record if the DagInit has an operator that is
a DefInit. Otherwise, it prints a fatal error.
There's only a few pre-existing examples in LLVM at the moment and I've
left a few instances of the code this simplifies as they had more specific
error messages than the generic one this produces. I'm going to be using
this a fair bit in my subsequent patches.
Reviewers: bogner, volkan, nhaehnle
Reviewed By: nhaehnle
Subscribers: nhaehnle, hiraditya, asb, rbar, johnrusso, simoncook, apazos, sabuasal, niosHD, jrtc27, MaskRay, zzheng, edward-jones, rogfer01, MartinMosbeck, brucehoult, the_o, PkmX, jocewei, lenary, s.egerton, pzheng, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D68424
llvm-svn: 374101
There were 2 problems here. First, these patterns were duplicated to
handle the inverted shift operands instead of using the commuted
PatFrags.
Second, the point of the zext folding patterns don't apply to the
non-0ing high subtargets. They should be skipped instead of inserting
the extension. The zeroing high code would be emitted when necessary
anyway. This was also emitting unnecessary zexts in cases where the
high bits were undefined.
llvm-svn: 374092
Also Revert "[LoopVectorize] Fix non-debug builds after rL374017"
This reverts commit 9f41deccc0.
This reverts commit 18b6fe07bc.
The patch is breaking PowerPC internal build, checked with author, reverting
on behalf of him for now due to timezone.
llvm-svn: 374091
Factor out CodeExtractor's analysis of allocas (for shrinkwrapping
purposes), and allow the analysis to be reused.
This resolves a quadratic compile-time bug observed when compiling
AMDGPUDisassembler.cpp.o.
Pre-patch (Release + LTO clang):
```
---User Time--- --System Time-- --User+System-- ---Wall Time--- --- Name ---
176.5278 ( 57.8%) 0.4915 ( 18.5%) 177.0192 ( 57.4%) 177.4112 ( 57.3%) Hot Cold Splitting
```
Post-patch (ReleaseAsserts clang):
```
---User Time--- --System Time-- --User+System-- ---Wall Time--- --- Name ---
1.4051 ( 3.3%) 0.0079 ( 0.3%) 1.4129 ( 3.2%) 1.4129 ( 3.2%) Hot Cold Splitting
```
Testing: check-llvm, and comparing the AMDGPUDisassembler.cpp.o binary
pre- vs. post-patch.
An alternate approach is to hide CodeExtractorAnalysisCache from clients
of CodeExtractor, and to recompute the analysis from scratch inside of
CodeExtractor::extractCodeRegion(). This eliminates some redundant work
in the shrinkwrapping legality check. However, some clients continue to
exhibit O(n^2) compile time behavior as computing the analysis is O(n).
rdar://55912966
Differential Revision: https://reviews.llvm.org/D68616
llvm-svn: 374089
Summary:
Without offsets on the MachineMemOperands (MMOs),
MachineInstr::mayAlias() will return true for all reads and writes to the
same resource descriptor. This leads to O(N^2) complexity in the MachineScheduler
when analyzing dependencies of buffer loads and stores. It also limits
the SILoadStoreOptimizer from merging more instructions.
This patch reduces the compile time of one pathological compute shader
from 12 seconds to 1 second.
Reviewers: arsenm, nhaehnle
Reviewed By: arsenm
Subscribers: kzhuravl, jvesely, wdng, yaxunl, dstuttard, tpr, t-tye, hiraditya, jfb, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65097
llvm-svn: 374087
The static analyzer is warning about potential null dereferences, but in these cases we should be able to use cast<> directly and if not assert will fire for us.
llvm-svn: 374085
Inhibit generation of unused real dpp instructions on gfx10 just
like it is done on other subtargets. This does not change anything
because these are illegal anyway and not accepted, but it does
reduce the number of instruction definitions generated.
Differential Revision: https://reviews.llvm.org/D68607
llvm-svn: 374083
Summary:
When searching for local expression tree created by stackified
registers, for 'block' placement, we start the search from the previous
instruction of a BB's terminator. But in 'try''s case, we should start
from the previous instruction of a call that can throw, or a EH_LABEL
that precedes the call, because the return values of the call's previous
instructions can be stackified and consumed by the throwing call.
For example,
```
i32.call @foo
call @bar ; may throw
br $label0
```
In this case, if we start the search from the previous instruction of
the terminator (`br` here), we end up stopping at `call @bar` and place
a 'try' between `i32.call @foo` and `call @bar`, because `call @bar`
does not have a return value so it is not a local expression tree of
`br`.
But in this case, unlike when placing 'block's, we should start the
search from `call @bar`, because the return value of `i32.call @foo` is
stackified and used by `call @bar`.
Reviewers: dschuff
Subscribers: sbc100, jgravelle-google, hiraditya, sunfish, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D68619
llvm-svn: 374073
During the If-Converter optimization pay attention when copying or
deleting call instructions in order to keep call site information in
valid state.
Reviewers: aprantl, vsk, efriedma
Reviewed By: vsk, efriedma
Differential Revision: https://reviews.llvm.org/D66955
llvm-svn: 374068
Summary:
In D65186 and related patches, MustBeExecutedContextExplorer is introduced. This enables us to traverse instructions guaranteed to execute from function entry. If we can know the argument is used as `dereferenceable` or `nonnull` in these instructions, we can mark `dereferenceable` or `nonnull` in the argument definition:
1. Memory instruction (similar to D64258)
Trace memory instruction pointer operand. Currently, only inbounds GEPs are traced.
```
define i64* @f(i64* %a) {
entry:
%add.ptr = getelementptr inbounds i64, i64* %a, i64 1
; (because of inbounds GEP we can know that %a is at least dereferenceable(16))
store i64 1, i64* %add.ptr, align 8
ret i64* %add.ptr ; dereferenceable 8 (because above instruction stores into it)
}
```
2. Propagation from callsite (similar to D27855)
If `deref` or `nonnull` are known in call site parameter attributes we can also say that argument also that attribute.
```
declare void @use3(i8* %x, i8* %y, i8* %z);
declare void @use3nonnull(i8* nonnull %x, i8* nonnull %y, i8* nonnull %z);
define void @parent1(i8* %a, i8* %b, i8* %c) {
call void @use3nonnull(i8* %b, i8* %c, i8* %a)
; Above instruction is always executed so we can say that@parent1(i8* nonnnull %a, i8* nonnull %b, i8* nonnull %c)
call void @use3(i8* %c, i8* %a, i8* %b)
ret void
}
```
Reviewers: jdoerfert, sstefan1, spatel, reames
Reviewed By: jdoerfert
Subscribers: xbolva00, hiraditya, jfb, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65402
llvm-svn: 374063
Summary: This patch introduces a generic way to compose two structured deductions. This will be used for composing generic deduction with `MustBeExecutedExplorer` and other existing generic deduction.
Reviewers: jdoerfert, sstefan1
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D66645
llvm-svn: 374060
Summary:
This format introduces new features and platforms
The motivation for this format is to support more than 1 platform since previous versions only supported additional architectures and 1 platform,
for example ios + ios-simulator and macCatalyst.
Reviewers: ributzka, steven_wu
Reviewed By: ributzka
Subscribers: mgorny, hiraditya, mgrang, dexonsmith, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67529
llvm-svn: 374058
When -pg option is present than a call to _mcount is inserted into every
function. However since the proper ABI was not followed then the generated
gmon.out did not give proper results. By inserting needed instructions
before every _mcount we can fix this.
Differential Revision: https://reviews.llvm.org/D68390
llvm-svn: 374055
Summary:
This patch adds the definitions of the constants and structures
necessary to interpret the MemoryInfoList minidump stream, as well as
the object::MinidumpFile interface to access the stream.
While the code is fairly simple, there is one important deviation from
the other minidump streams, which is worth calling out explicitly.
Unlike other "List" streams, the size of the records inside
MemoryInfoList stream is not known statically. Instead it is described
in the stream header. This makes it impossible to return
ArrayRef<MemoryInfo> from the accessor method, as it is done with other
streams. Instead, I create an iterator class, which can be parameterized
by the runtime size of the structure, and return
iterator_range<iterator> instead.
Reviewers: amccarth, jhenderson, clayborg
Subscribers: JosephTremoulet, zturner, markmentovai, lldb-commits, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D68210
llvm-svn: 374051
Tim Northover remarked that the added patterns for fmls fp16
produce wrong code in case the fsub instruction has a
multiplication as its first operand, i.e., all the patterns FMLSv*_OP1:
> define <8 x half> @test_FMLSv8f16_OP1(<8 x half> %a, <8 x half> %b, <8 x half> %c) {
> ; CHECK-LABEL: test_FMLSv8f16_OP1:
> ; CHECK: fmls {{v[0-9]+}}.8h, {{v[0-9]+}}.8h, {{v[0-9]+}}.8h
> entry:
>
> %mul = fmul fast <8 x half> %c, %b
> %sub = fsub fast <8 x half> %mul, %a
> ret <8 x half> %sub
> }
>
> This doesn't look right to me. The exact instruction produced is "fmls
> v0.8h, v2.8h, v1.8h", which I think calculates "v0 - v2*v1", but the
> IR is calculating "v2*v1-v0". The equivalent <4 x float> code also
> doesn't emit an fmls.
This patch generates an fmla and negates the value of the operand2 of the fsub.
Inspecting the pattern match, I found that there was another mistake in the
opcode to be selected: matching FMULv4*16 should generate FMLSv4*16
and not FMLSv2*32.
Tested on aarch64-linux with make check-all.
Differential Revision: https://reviews.llvm.org/D67990
llvm-svn: 374044
* Adds a TypeSize struct to represent the known minimum size of a type
along with a flag to indicate that the runtime size is a integer multiple
of that size
* Converts existing size query functions from Type.h and DataLayout.h to
return a TypeSize result
* Adds convenience methods (including a transparent conversion operator
to uint64_t) so that most existing code 'just works' as if the return
values were still scalars.
* Uses the new size queries along with ElementCount to ensure that all
supported instructions used with scalable vectors can be constructed
in IR.
Reviewers: hfinkel, lattner, rkruppe, greened, rovka, rengolin, sdesmalen
Reviewed By: rovka, sdesmalen
Differential Revision: https://reviews.llvm.org/D53137
llvm-svn: 374042
Summary:
When getValueInMiddleOfBlock happens to be called for a basic block
that has no incoming value at all, an IMPLICIT_DEF is inserted in that
block via GetValueAtEndOfBlockInternal. This IMPLICIT_DEF must be at
the top of its basic block or it will likely not reach the use that
the caller intends to insert.
Issue: https://github.com/GPUOpen-Drivers/llpc/issues/204
Reviewers: arsenm, rampitec
Subscribers: jvesely, wdng, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D68183
llvm-svn: 374040
Before this patch, loads and stores were only tracked by their corresponding
queues in the LSUnit from dispatch until execute stage. In practice we should be
more conservative and assume that memory opcodes leave their queues at
retirement stage.
Basically, loads should leave the load queue only when they have completed and
delivered their data. We conservatively assume that a load is completed when it
is retired. Stores should be tracked by the store queue from dispatch until
retirement. In practice, stores can only leave the store queue if their data can
be written to the data cache.
This is mostly a mechanical change. With this patch, the retire stage notifies
the LSUnit when a memory instruction is retired. That would triggers the release
of LDQ/STQ entries. The only visible change is in memory tests for the bdver2
model. That is because bdver2 is the only model that defines the load/store
queue size.
This patch partially addresses PR39830.
Differential Revision: https://reviews.llvm.org/D68266
llvm-svn: 374034
Reid Kleckner