Step towards removing the hard coded behavior for this trait and to instead use common interface.
Differential Revision: https://reviews.llvm.org/D114208
Re-applies D111513:
* Adds a full-fledged Python example dialect and tests to the Standalone example (need to do a bit of tweaking in the top level CMake and lit tests to adapt better to if not building with Python enabled).
* Rips out remnants of custom extension building in favor of pybind11_add_module which does the right thing.
* Makes python and extension sources installable (outputs to src/python/${name} in the install tree): Both Python and C++ extension sources get installed as downstreams need all of this in order to build a derived version of the API.
* Exports sources targets (with our properties that make everything work) by converting them to INTERFACE libraries (which have export support), as recommended for the forseeable future by CMake devs. Renames custom properties to start with lower-case letter, as also recommended/required (groan).
* Adds a ROOT_DIR argument to declare_mlir_python_extension since now all C++ sources for an extension must be under the same directory (to line up at install time).
* Downstreams will need to adapt by:
* Remove absolute paths from any SOURCES for declare_mlir_python_extension (I believe all downstreams are just using ${CMAKE_CURRENT_SOURCE_DIR} here, which can just be ommitted). May need to set ROOT_DIR if not relative to the current source directory.
* To allow further downstreams to install/build, will need to make sure that all C++ extension headers are also listed under SOURCES for declare_mlir_python_extension.
This reverts commit 1a6c26d1f5.
Reviewed By: stephenneuendorffer
Differential Revision: https://reviews.llvm.org/D113732
* Depends on D111504, which provides the boilerplate for building aggregate shared libraries from installed MLIR.
* Adds a full-fledged Python example dialect and tests to the Standalone example (need to do a bit of tweaking in the top level CMake and lit tests to adapt better to if not building with Python enabled).
* Rips out remnants of custom extension building in favor of `pybind11_add_module` which does the right thing.
* Makes python and extension sources installable (outputs to src/python/${name} in the install tree): Both Python and C++ extension sources get installed as downstreams need all of this in order to build a derived version of the API.
* Exports sources targets (with our properties that make everything work) by converting them to INTERFACE libraries (which have export support), as recommended for the forseeable future by CMake devs. Renames custom properties to start with lower-case letter, as also recommended/required (groan).
* Adds a ROOT_DIR argument to `declare_mlir_python_extension` since now all C++ sources for an extension must be under the same directory (to line up at install time).
* Need to validate against a downstream or two and adjust, prior to submitting.
Downstreams will need to adapt by:
* Remove absolute paths from any SOURCES for `declare_mlir_python_extension` (I believe all downstreams are just using `${CMAKE_CURRENT_SOURCE_DIR}` here, which can just be ommitted). May need to set `ROOT_DIR` if not relative to the current source directory.
* To allow further downstreams to install/build, will need to make sure that all C++ extension headers are also listed under SOURCES for `declare_mlir_python_extension`.
Reviewed By: stephenneuendorffer, mikeurbach
Differential Revision: https://reviews.llvm.org/D111513
The current implementation invokes materializations
whenever an input operand does not have a mapping for the
desired type, i.e. it requires materialization at the earliest possible
point. This conflicts with goal of dialect conversion (and also the
current documentation) which states that a materialization is only
required if the materialization is supposed to persist after the
conversion process has finished.
This revision refactors this such that whenever a target
materialization "might" be necessary, we insert an
unrealized_conversion_cast to act as a temporary materialization.
This allows for deferring the invocation of the user
materialization hooks until the end of the conversion process,
where we actually have a better sense if it's actually
necessary. This has several benefits:
* In some cases a target materialization hook is no longer
necessary
When performing a full conversion, there are some situations
where a temporary materialization is necessary. Moving forward,
these users won't need to provide any target materializations,
as the temporary materializations do not require the user to
provide materialization hooks.
* getRemappedValue can now handle values that haven't been
converted yet
Before this commit, it wasn't well supported to get the remapped
value of a value that hadn't been converted yet (making it
difficult/impossible to convert multiple operations in many
situations). This commit updates getRemappedValue to properly
handle this case by inserting temporary materializations when
necessary.
Another code-health related benefit is that with this change we
can move a majority of the complexity related to materializations
to the end of the conversion process, instead of handling adhoc
while conversion is happening.
Differential Revision: https://reviews.llvm.org/D111620
* Incorporates a reworked version of D106419 (which I have closed but has comments on it).
* Extends the standalone example to include a minimal CAPI (for registering its dialect) and a test which, from out of tree, creates an aggregate dylib and links a little sample program against it. This will likely only work today in *static* MLIR builds (until the TypeID fiasco is finally put to bed). It should work on all platforms, though (including Windows - albeit I haven't tried this exact incarnation there).
* This is the biggest pre-requisite to being able to build out of tree MLIR Python-based projects from an installed MLIR/LLVM.
* I am rather nauseated by the CMake shenanigans I had to endure to get this working. The primary complexity, above and beyond the previous patch is because (with no reason given), it is impossible to export target properties that contain generator expressions... because, of course it isn't. In this case, the primary reason we use generator expressions on the individual embedded libraries is to support arbitrary ordering. Since that need doesn't apply to out of tree (which import everything via FindPackage at the outset), we fall back to a more imperative way of doing the same thing if we detect that the target was imported. Gross, but I don't expect it to need a lot of maintenance.
* There should be a relatively straight-forward path from here to rebase libMLIR.so on top of this facility and also make it include the CAPI.
Differential Revision: https://reviews.llvm.org/D111504
Precursor: https://reviews.llvm.org/D110200
Removed redundant ops from the standard dialect that were moved to the
`arith` or `math` dialects.
Renamed all instances of operations in the codebase and in tests.
Reviewed By: rriddle, jpienaar
Differential Revision: https://reviews.llvm.org/D110797
Currently DenseElementsAttr only exposes the ability to get the full range of values for a given type T, but there are many situations where we just want the beginning/end iterator. This revision adds proper value_begin/value_end methods for all of the supported T types, and also cleans up a bit of the interface.
Differential Revision: https://reviews.llvm.org/D104173
This aligns the printer with the parser contract: the operation isn't part of the user-controllable part of the syntax.
Differential Revision: https://reviews.llvm.org/D108804
The StringAttr version doesn't need a context, so we can just use the
existing `SymbolRefAttr::get` form. The StringRef version isn't preferred
so we want to encourage people to use StringAttr.
There is an additional form of getSymbolRefAttr that takes a (SymbolTrait
implementing) operation. This should also be moved, but I'll do that as
a separate patch.
Differential Revision: https://reviews.llvm.org/D108922
After the MemRef has been split out of the Standard dialect, the
conversion to the LLVM dialect remained as a huge monolithic pass.
This is undesirable for the same complexity management reasons as having
a huge Standard dialect itself, and is even more confusing given the
existence of a separate dialect. Extract the conversion of the MemRef
dialect operations to LLVM into a separate library and a separate
conversion pass.
Reviewed By: herhut, silvas
Differential Revision: https://reviews.llvm.org/D105625
* Previously, we were only generating .h.inc files. We foresee the need to also generate implementations and this is a step towards that.
* Discussed in https://llvm.discourse.group/t/generating-cpp-inc-files-for-dialects/3732/2
* Deviates from the discussion above by generating a default constructor in the .cpp.inc file (and adding a tablegen bit that disables this in case if this is user provided).
* Generating the destructor started as a way to flush out the missing includes (produces a link error), but it is a strict improvement on its own that is worth doing (i.e. by emitting key methods in the .cpp file, we root vtables in one translation unit, which is a non-controversial improvement).
Differential Revision: https://reviews.llvm.org/D105070
At present, a lot of code contains main function bodies like "return failed(mlir::MlirOptMain(...);". This is unfortunate for two reasons: a) it uses ADL, which is maybe not what the free "failed" function was designed for; and b) it is a bit awkward to read, requring the reader to both understand the boolean nature of the value and the semantics of main's return value. (And it's also not portable, since 1 is not a portable success value.)
The replacement code, `return mlir::AsMainReturnCode(mlir::MlirOptMain(...))` is a bit more self-explanatory.
The change applies the new function to a few internal uses of MlirOptMain, too.
Reviewed By: mehdi_amini
Differential Revision: https://reviews.llvm.org/D102641
First step in adding alignment as an attribute to MLIR global definitions. Alignment can be specified for global objects in LLVM IR. It can also be specified as a named attribute in the LLVMIR dialect of MLIR. However, this attribute has no standing and is discarded during translation from MLIR to LLVM IR. This patch does two things: First, it adds the attribute to the syntax of the llvm.mlir.global operation, and by doing this it also adds accessors and verifications. The syntax is "align=XX" (with XX being an integer), placed right after the value of the operation. Second, it allows transforming this operation to and from LLVM IR. It is checked whether the value is an integer power of 2.
Reviewed By: ftynse, mehdi_amini
Differential Revision: https://reviews.llvm.org/D101492
This is useful for expressing specific table-gen options, like selecting
a particular dialect to print.
Use it to fix the documentation for the `pdl_interp` dialect which is now
generating the first dialect it finds in its input which is `pdl`.
Differential Revision: https://reviews.llvm.org/D100517
In particular for Graph Regions, the terminator needs is just a
historical artifact of the generalization of MLIR from CFG region.
Operations like Module don't need a terminator, and before Module
migrated to be an operation with region there wasn't any needed.
To validate the feature, the ModuleOp is migrated to use this trait and
the ModuleTerminator operation is deleted.
This patch is likely to break clients, if you're in this case:
- you may iterate on a ModuleOp with `getBody()->without_terminator()`,
the solution is simple: just remove the ->without_terminator!
- you created a builder with `Builder::atBlockTerminator(module_body)`,
just use `Builder::atBlockEnd(module_body)` instead.
- you were handling ModuleTerminator: it isn't needed anymore.
- for generic code, a `Block::mayNotHaveTerminator()` may be used.
Differential Revision: https://reviews.llvm.org/D98468
This doesn't change APIs, this just cleans up the many in-tree uses of these
names to use the new preferred names. We'll keep the old names around for a
couple weeks to help transitions.
Differential Revision: https://reviews.llvm.org/D99127
This allows for storage instances to store data that isn't uniqued in the context, or contain otherwise non-trivial logic, in the rare situations that they occur. Storage instances with trivial destructors will still have their destructor skipped. A consequence of this is that the storage instance definition must be visible from the place that registers the type.
Differential Revision: https://reviews.llvm.org/D98311
There is no need for the interface implementations to be exposed, opaque
registration functions are sufficient for all users, similarly to passes.
Reviewed By: mehdi_amini
Differential Revision: https://reviews.llvm.org/D97852
This also exposed a bug in Dialect loading where it was not correctly identifying identifiers that had the dialect namespace as a prefix.
Differential Revision: https://reviews.llvm.org/D97431
This commit introduced a cyclic dependency:
Memref dialect depends on Standard because it used ConstantIndexOp.
Std depends on the MemRef dialect in its EDSC/Intrinsics.h
Working on a fix.
This reverts commit 8aa6c3765b.
Create the memref dialect and move several dialect-specific ops without
dependencies to other ops from std dialect to this dialect.
Moved ops:
AllocOp -> MemRef_AllocOp
AllocaOp -> MemRef_AllocaOp
DeallocOp -> MemRef_DeallocOp
MemRefCastOp -> MemRef_CastOp
GetGlobalMemRefOp -> MemRef_GetGlobalOp
GlobalMemRefOp -> MemRef_GlobalOp
PrefetchOp -> MemRef_PrefetchOp
ReshapeOp -> MemRef_ReshapeOp
StoreOp -> MemRef_StoreOp
TransposeOp -> MemRef_TransposeOp
ViewOp -> MemRef_ViewOp
The roadmap to split the memref dialect from std is discussed here:
https://llvm.discourse.group/t/rfc-split-the-memref-dialect-from-std/2667
Differential Revision: https://reviews.llvm.org/D96425
A series of preceding patches changed the mechanism for translating MLIR to
LLVM IR to use dialect interface with delayed registration. It is no longer
necessary for specific dialects to derive from ModuleTranslation. Remove all
virtual methods from ModuleTranslation and factor out the entry point to be a
free function.
Also perform some cleanups in ModuleTranslation internals.
Depends On D96774
Reviewed By: nicolasvasilache
Differential Revision: https://reviews.llvm.org/D96775
Port the translation of five dialects that define LLVM IR intrinsics
(LLVMAVX512, LLVMArmNeon, LLVMArmSVE, NVVM, ROCDL) to the new dialect
interface-based mechanism. This allows us to remove individual translations
that were created for each of these dialects and just use one common
MLIR-to-LLVM-IR translation that potentially supports all dialects instead,
based on what is registered and including any combination of translatable
dialects. This removal was one of the main goals of the refactoring.
To support the addition of GPU-related metadata, the translation interface is
extended with the `amendOperation` function that allows the interface
implementation to post-process any translated operation with dialect attributes
from the dialect for which the interface is implemented regardless of the
operation's dialect. This is currently applied to "kernel" functions, but can
be used to construct other metadata in dialect-specific ways without
necessarily affecting operations.
Depends On D96591, D96504
Reviewed By: nicolasvasilache
Differential Revision: https://reviews.llvm.org/D96592
The existing approach to translation to the LLVM IR relies on a single
translation supporting the base LLVM dialect, extensible through inheritance to
support intrinsic-based dialects also derived from LLVM IR such as NVVM and
AVX512. This approach does not scale well as it requires additional
translations to be created for each new intrinsic-based dialect and does not
allow them to mix in the same module, contrary to the rest of the MLIR
infrastructure. Furthermore, OpenMP translation ingrained itself into the main
translation mechanism.
Start refactoring the translation to LLVM IR to operate using dialect
interfaces. Each dialect that contains ops translatable to LLVM IR can
implement the interface for translating them, and the top-level translation
driver can operate on interfaces without knowing about specific dialects.
Furthermore, the delayed dialect registration mechanism allows one to avoid a
dependency on LLVM IR in the dialect that is translated to it by implementing
the translation as a separate library and only registering it at the client
level.
This change introduces the new mechanism and factors out the translation of the
"main" LLVM dialect. The remaining dialects will follow suit.
Reviewed By: nicolasvasilache
Differential Revision: https://reviews.llvm.org/D96503
Multi-configuration generators (such as Visual Studio and Xcode) allow the specification of a build flavor at build time instead of config time, so the lit configuration files need to support that - and they do for the most part. There are several places that had one of two issues (or both!):
1) Paths had %(build_mode)s set up, but then not configured, resulting in values that would not work correctly e.g. D:/llvm-build/%(build_mode)s/bin/dsymutil.exe
2) Paths did not have %(build_mode)s set up, but instead contained $(Configuration) (which is the value for Visual Studio at configuration time, for Xcode they would have had the equivalent) e.g. "D:/llvm-build/$(Configuration)/lib".
This seems to indicate that we still have a lot of fragility in the configurations, but also that a number of these paths are never used (at least on Windows) since the errors appear to have been there a while.
This patch fixes the configurations and it has been tested with Ninja and Visual Studio to generate the correct paths. We should consider removing some of these settings altogether.
Reviewed By: JDevlieghere, mehdi_amini
Differential Revision: https://reviews.llvm.org/D96427
This reverts commit 511dd4f438 along with
a couple fixes.
Original message:
Now the context is the first, rather than the last input.
This better matches the rest of the infrastructure and makes
it easier to move these types to being declaratively specified.
Phabricator: https://reviews.llvm.org/D96111
Now the context is the first, rather than the last input.
This better matches the rest of the infrastructure and makes
it easier to move these types to being declaratively specified.
Differential Revision: https://reviews.llvm.org/D96111
* As discussed, fixes the ordering or (operands, results) -> (results, operands) in various `create` like methods.
* Fixes a syntax error in an ODS accessor method.
* Removes the linalg example in favor of a test case that exercises the same.
* Fixes FuncOp visibility to properly use None instead of the empty string and defaults it to None.
* Implements what was documented for requiring that trailing __init__ args `loc` and `ip` are keyword only.
* Adds a check to `InsertionPoint.insert` so that if attempting to insert past the terminator, an exception is raised telling you what to do instead. Previously, this would crash downstream (i.e. when trying to print the resultant module).
* Renames `_ods_build_default` -> `build_generic` and documents it.
* Removes `result` from the list of prohibited words and for single-result ops, defaults to naming the result `result`, thereby matching expectations and what is already implemented on the base class.
* This was intended to be a relatively small set of changes to be inlined with the broader support for ODS generating the most specific builder, but it spidered out once actually testing various combinations, so rolling up separately.
Differential Revision: https://reviews.llvm.org/D95320
A cast-like operation is one that converts from a set of input types to a set of output types. The arity of the inputs may be from 0-N, whereas the arity of the outputs may be anything from 1-N. Cast-like operations are removable in cases where they produce a "no-op", i.e when the input types and output types match 1-1.
Differential Revision: https://reviews.llvm.org/D94831
* Matches how all of the other shaped types are declared.
* No super principled reason fro this ordering beyond that it makes the one that was different be like the rest.
* Also matches ordering of things like ndarray, et al.
Reviewed By: ftynse, nicolasvasilache
Differential Revision: https://reviews.llvm.org/D94812
* This isn't exclusive with other mechanisms for more ODS centric op definitions, but based on discussions, we feel that we will always benefit from a python escape hatch, and that is the most natural way to write things that don't fit the mold.
* I suspect this facility needs further tweaking, and once it settles, I'll document it and add more tests.
* Added extensions for linalg, since it is unusable without them and continued to evolve my e2e example.
Reviewed By: ftynse
Differential Revision: https://reviews.llvm.org/D94752
* This allows us to hoist trait level information for regions and sized-variadic to class level attributes (_ODS_REGIONS, _ODS_OPERAND_SEGMENTS, _ODS_RESULT_SEGMENTS).
* Eliminates some splicey python generated code in favor of a native helper for it.
* Makes it possible to implement custom, variadic and region based builders with one line of python, without needing to manually code access to the segment attributes.
* Needs follow-on work for region based callbacks and support for SingleBlockImplicitTerminator.
* A follow-up will actually add ODS support for generating custom Python builders that delegate to this new method.
* Also includes the start of an e2e sample for constructing linalg ops where this limitation was discovered (working progressively through this example and cleaning up as I go).
Differential Revision: https://reviews.llvm.org/D94738
Mehdi Amini