On Cygwin, at first, <stddef.h> is included without __need_wint_t.
Next, <stddef.h> is included with __need_wint_t, though Modules feature would not process <stddef.h> twice.
Then, wint_t is not found in system headers.
llvm-svn: 149500
The CMake build already generated one. Follows clang r149497.
This brings us one step closer to compiling and configuring clang
separately from LLVM using the autoconf build, too.
(I lack the right version of autoconf et al. to regen, but it
was a simple change, so I just updated configure manually.)
llvm-svn: 149498
This already exists in the CMake build, which is part of what makes
building clang separately from llvm via cmake possible. This cleans up
that discrepancy between the build systems (and sets the groundwork
for configuring clang separately, too).
llvm-svn: 149497
actually falls back to memmove.
In this case we still need to initialize real_memcpy, so we set it to
real_memmove
We check for MACOS_VERSION_SNOW_LEOPARD, because currently only Snow
Leopard and Lion are supported.
llvm-svn: 149492
This is a mess. According to the C++11 standard, pointer subtraction only has
undefined behavior if the difference of the array indices does not fit into a
ptrdiff_t.
However, common implementations effectively perform a char* subtraction first,
and then divide the result by the element size, which can cause overflows in
some cases. Those cases are not considered to be undefined behavior by this
change; perhaps they should be.
llvm-svn: 149490
You can now access a frame in a thread using:
lldb.SBThread.frame[int] -> lldb.SBFrame object for a frame in a thread
Where "int" is an integer index. You can also access a list object with all of
the frames using:
lldb.SBThread.frames => list() of lldb.SBFrame objects
All SB objects that give out SBAddress objects have properties named "addr"
lldb.SBInstructionList now has the following convenience accessors for len() and
instruction access using an index:
insts = lldb.frame.function.instructions
for idx in range(len(insts)):
print insts[idx]
Instruction lists can also lookup an isntruction using a lldb.SBAddress as the key:
pc_inst = lldb.frame.function.instructions[lldb.frame.addr]
lldb.SBProcess now exposes:
lldb.SBProcess.is_alive => BOOL Check if a process is exists and is alive
lldb.SBProcess.is_running => BOOL check if a process is running (or stepping):
lldb.SBProcess.is_running => BOOL check if a process is currently stopped or crashed:
lldb.SBProcess.thread[int] => lldb.SBThreads for a given "int" zero based index
lldb.SBProcess.threads => list() containing all lldb.SBThread objects in a process
SBInstruction now exposes:
lldb.SBInstruction.mnemonic => python string for instruction mnemonic
lldb.SBInstruction.operands => python string for instruction operands
lldb.SBInstruction.command => python string for instruction comment
SBModule now exposes:
lldb.SBModule.uuid => uuid.UUID(), an UUID object from the "uuid" python module
lldb.SBModule.symbol[int] => lldb.Symbol, lookup symbol by zero based index
lldb.SBModule.symbol[str] => list() of lldb.Symbol objects that match "str"
lldb.SBModule.symbol[re] => list() of lldb.Symbol objecxts that match the regex
lldb.SBModule.symbols => list() of all symbols in a module
SBAddress objects can now access the current load address with the "lldb.SBAddress.load_addr"
property. The current "lldb.target" will be used to try and resolve the load address.
Load addresses can also be set using this accessor:
addr = lldb.SBAddress()
addd.load_addr = 0x123023
Then you can check the section and offset to see if the address got resolved.
SBTarget now exposes:
lldb.SBTarget.module[int] => lldb.SBModule from zero based module index
lldb.SBTarget.module[str] => lldb.SBModule by basename or fullpath or uuid string
lldb.SBTarget.module[uuid.UUID()] => lldb.SBModule whose UUID matches
lldb.SBTarget.module[re] => list() of lldb.SBModule objects that match the regex
lldb.SBTarget.modules => list() of all lldb.SBModule objects in the target
SBSymbol now exposes:
lldb.SBSymbol.name => python string for demangled symbol name
lldb.SBSymbol.mangled => python string for mangled symbol name or None if there is none
lldb.SBSymbol.type => lldb.eSymbolType enum value
lldb.SBSymbol.addr => SBAddress object that represents the start address for this symbol (if there is one)
lldb.SBSymbol.end_addr => SBAddress for the end address of the symbol (if there is one)
lldb.SBSymbol.prologue_size => pythin int containing The size of the prologue in bytes
lldb.SBSymbol.instructions => SBInstructionList containing all instructions for this symbol
SBFunction now also has these new properties in addition to what is already has:
lldb.SBFunction.addr => SBAddress object that represents the start address for this function
lldb.SBFunction.end_addr => SBAddress for the end address of the function
lldb.SBFunction.instructions => SBInstructionList containing all instructions for this function
SBFrame now exposes the SBAddress for the frame:
lldb.SBFrame.addr => SBAddress which is the section offset address for the current frame PC
These are all in addition to what was already added. Documentation and website
updates coming soon.
llvm-svn: 149489
The purpose of refactoring is to hide operand roles from SwitchInst user (programmer). If you want to play with operands directly, probably you will need lower level methods than SwitchInst ones (TerminatorInst or may be User). After this patch we can reorganize SwitchInst operands and successors as we want.
What was done:
1. Changed semantics of index inside the getCaseValue method:
getCaseValue(0) means "get first case", not a condition. Use getCondition() if you want to resolve the condition. I propose don't mix SwitchInst case indexing with low level indexing (TI successors indexing, User's operands indexing), since it may be dangerous.
2. By the same reason findCaseValue(ConstantInt*) returns actual number of case value. 0 means first case, not default. If there is no case with given value, ErrorIndex will returned.
3. Added getCaseSuccessor method. I propose to avoid usage of TerminatorInst::getSuccessor if you want to resolve case successor BB. Use getCaseSuccessor instead, since internal SwitchInst organization of operands/successors is hidden and may be changed in any moment.
4. Added resolveSuccessorIndex and resolveCaseIndex. The main purpose of these methods is to see how case successors are really mapped in TerminatorInst.
4.1 "resolveSuccessorIndex" was created if you need to level down from SwitchInst to TerminatorInst. It returns TerminatorInst's successor index for given case successor.
4.2 "resolveCaseIndex" converts low level successors index to case index that curresponds to the given successor.
Note: There are also related compatability fix patches for dragonegg, klee, llvm-gcc-4.0, llvm-gcc-4.2, safecode, clang.
llvm-svn: 149482
The purpose of refactoring is to hide operand roles from SwitchInst user (programmer). If you want to play with operands directly, probably you will need lower level methods than SwitchInst ones (TerminatorInst or may be User). After this patch we can reorganize SwitchInst operands and successors as we want.
What was done:
1. Changed semantics of index inside the getCaseValue method:
getCaseValue(0) means "get first case", not a condition. Use getCondition() if you want to resolve the condition. I propose don't mix SwitchInst case indexing with low level indexing (TI successors indexing, User's operands indexing), since it may be dangerous.
2. By the same reason findCaseValue(ConstantInt*) returns actual number of case value. 0 means first case, not default. If there is no case with given value, ErrorIndex will returned.
3. Added getCaseSuccessor method. I propose to avoid usage of TerminatorInst::getSuccessor if you want to resolve case successor BB. Use getCaseSuccessor instead, since internal SwitchInst organization of operands/successors is hidden and may be changed in any moment.
4. Added resolveSuccessorIndex and resolveCaseIndex. The main purpose of these methods is to see how case successors are really mapped in TerminatorInst.
4.1 "resolveSuccessorIndex" was created if you need to level down from SwitchInst to TerminatorInst. It returns TerminatorInst's successor index for given case successor.
4.2 "resolveCaseIndex" converts low level successors index to case index that curresponds to the given successor.
Note: There are also related compatability fix patches for dragonegg, klee, llvm-gcc-4.0, llvm-gcc-4.2, safecode, clang.
llvm-svn: 149481
The pass pointer should never be referenced after sending it to
schedulePass(), which may delete the pass. To fix this bug I had to
clean up the design leading to more goodness.
You may notice now that any non-analysis pass is printed. So things like loop-simplify and lcssa show up, while target lib, target data, alias analysis do not show up. Normally, analysis don't mutate the IR, but you can now check this by using both -print-after and -print-before. The effects of analysis will now show up in between the two.
The llc path is still in bad shape. But I'll be improving it in my next checkin. Meanwhile, print-machineinstrs still works the same way. With print-before/after, many llc passes that were not printed before now are, some of these should be converted to analysis. A few very important passes, isel and scheduler, are not properly initialized, so not printed.
llvm-svn: 149480
commit 149470. This fixes test/CodeGen/PR3589-freestanding-libcalls.c.
Original log:
ConstantArray::get() (for strings) is going away, use
ConstantDataArray::getString instead.
Many instances of ConstantArray::get() could be moved to
use more efficient ConstantDataArray methods that avoid a ton
of intermediate Constant*'s for each element (e.g.
GetConstantArrayFromStringLiteral). I don't plan on doing this
in the short-term though.
llvm-svn: 149477
This is the initial checkin of the basic-block autovectorization pass along with some supporting vectorization infrastructure.
Special thanks to everyone who helped review this code over the last several months (especially Tobias Grosser).
llvm-svn: 149468
(lldb) script
>>> frames = lldb.thread.frames
>>> for frame in frames:
... print frame
Also changed all of the "__repr__" methods to strip any trailing newline characters so we don't end up with entra newlines.
llvm-svn: 149466
o Symbols.cpp:
Emit a warning message when dSYM does not match the binary.
o warnings/uuid:
Added regression test case.
o lldbtest.py:
Modified to allow test case writer to demand that the build command does not begin
with a clean first; required to make TestUUIDMismatchWanring.py work.
rdar://problem/10515708
llvm-svn: 149465
lldb.value()
It it designed to be given a lldb.SBValue object and it allows natural
use of a variable value:
pt = lldb.value(lldb.frame.FindVariable("pt"))
print pt
print pt.x
print pt.y
pt = lldb.frame.FindVariable("rectangle_array")
print rectangle_array[12]
print rectangle_array[5].origin.x
Note that array access works just fine and works on arrays or pointers:
pt = lldb.frame.FindVariable("point_ptr")
print point_ptr[5].y
Also note that pointer child accesses are done using a "." instead of "->":
print point_ptr.x
llvm-svn: 149464
- Actually building the var -> capture mapping properly (there was an off-by-one error)
- Keeping track of the source location of each capture
- Minor QoI improvements, e.g, highlighing the prior capture if
there are multiple captures, pointing at the variable declaration we
found if we reject it.
As part of this, add standard citations for the various semantic
checks we perform, and note where we're not performing those checks as
we should.
llvm-svn: 149462
Changing arguments from being passed as fixed to varargs is unsafe, as
the ABI may require they be handled differently (stack vs. register, for
example).
Remove two tests which rely on the bitcast being folded into the direct
call, which is exactly the transformation that's unsafe.
llvm-svn: 149457
CFBridgingRetain/CFBridgingRelease calls instead
of __bridge_retained/__bridge_transfer casts as preferred
way of moving cf objects to arc land. // rdar://10207950
llvm-svn: 149449
We previously weren't catching that SBValue::Cast(...) would crash
if we had an invalid (empty) SBValue object.
Cleaned up the SBType API a bit.
llvm-svn: 149447
NAKAMURA Takumi