More or less all the instructions defined in the v8.2a full-fp16
extension are defined as UNPREDICTABLE if you put them in an IT block
(Thumb) or use with any condition other than AL (ARM). LLVM didn't
know that, and was happy to conditionalise them.
In order to force these instructions to count as not predicable, I had
to make a small Tablegen change. The code generation back end mostly
decides if an instruction was predicable by looking for something it
can identify as a predicate operand; there's an isPredicable bit flag
that overrides that check in the positive direction, but nothing that
overrides it in the negative direction.
(I considered the alternative approach of actually removing the
predicate operand from those instructions, but thought that it would
be more painful overall for instructions differing only in data type
to have different shapes of operand list. This way, the only code that
has to notice the difference is the if-converter.)
So I've added an isUnpredicable bit alongside isPredicable, and set
that bit on the right subset of FP16 instructions, and also on the
VSEL, VMAXNM/VMINNM and VRINT[ANPM] families which should be
unpredicable for all data types.
I've included a couple of representative regression tests, both of
which previously caused an fp16 instruction to be conditionalised in
ARM state and (with -arm-no-restrict-it) to be put in an IT block in
Thumb.
Reviewers: SjoerdMeijer, t.p.northover, efriedma
Reviewed By: efriedma
Subscribers: jdoerfert, javed.absar, kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D57823
llvm-svn: 354768
OPC_CheckCondCode is always used as operand 2 of a setcc. And its always surrounded by a MoveChild2 and a MoveParent. By having a dedicated opcode for this case we can reduce the number of bytes needed for this pattern from 4 bytes to 2.
This saves ~3000 bytes in the X86 table.
llvm-svn: 354763
Summary:
This adds support for defining patterns for global isel using pointer
types, for example:
def : Pat<(load GPR32:$src),
(p1 (LOAD GPR32:$src))>;
DAGISelEmitter will ignore the pointer information and treat these
types as integers with the same bit-width as the pointer type.
Reviewers: dsanders, rtereshin, arsenm
Reviewed By: arsenm
Subscribers: Petar.Avramovic, wdng, rovka, kristof.beyls, jfb, volkan, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D57065
llvm-svn: 354510
This class is used for two difference tablegen generated tables. For one of the tables the Value FeatureBitset only has one bit set. For the other usage the Implies field was unused.
This patch changes the Value field to just be an unsigned. For the usage that put a real vector in bitset, we now use the previously unused Implies field and leave the Value field unused instead.
This is good for a 16K reduction in the size of llc on my local build with all targets enabled.
llvm-svn: 354243
From the docs: `class LitTestCase(unittest.TestCase)`
LitTestCase is an adaptor for providing a 'unittest' compatible
interface to 'lit' tests so that we can run lit tests with standard
python test runners.
It does not seem to be used anywhere.
Differential Revision: https://reviews.llvm.org/D58264
llvm-svn: 354188
Move code that is executed on worker process to separate file. This
makes the use of the pickled arguments stored in global variables in the
worker a bit clearer. (Still not pretty though.)
Extract handling of parallelism groups to it's own function.
Use BoundedSemaphore instead of Semaphore. BoundedSemaphore raises for
unmatched release() calls.
Cleanup imports.
Differential Revision: https://reviews.llvm.org/D58196
llvm-svn: 354187
Summary:
Automatically upgrade debugging experience (single process, no thread
pool) when:
1) we only run a single test
2) user specifies `-j1`
Details:
Fix `--max-failures` in single process mode. Option did not have an
effect in single process mode.
Add display feedback for single process mode. Adapted test.
Improve argument checking (require positive integers).
`--single-process` is now essentially an alias for `-j1`. Should we
remove it?
Reviewers: rnk
Differential Revision: https://reviews.llvm.org/D58249
llvm-svn: 354068
This patch adds an `is_optimized` variable, orthogonal to `is_debug`, to allow for a gn analogue to `RelWithDebInfo` builds.
As part of this we'll want to explicitly enable GC+ICF, for the sake of `is_debug && is_optimized` builds. The flags normally default to true except that if you pass `/DEBUG` they default to false.
Differential Revision: https://reviews.llvm.org/D58075
llvm-svn: 353888
Summary:
While working on the GISel Combiner, I noticed I was producing location-less
error messages fairly often and set about fixing this. In the process, I
noticed quite a few places elsewhere in TableGen that also neglected to include
a relevant location.
This patch adds locations to errors that relate to a specific record (or a
field within it) and also have easy access to the relevant location. This is
particularly useful when multiclasses are involved as many of these errors
refer to the full name of a record and it's difficult to guess which substring
is grep-able.
Unfortunately, tablegen currently only supports Record granularity so it's not
currently possible to point at a specific Init so these sometimes point at the
record that caused the error rather than the precise origin of the error.
Reviewers: bogner, aditya_nandakumar, volkan, aemerson, paquette, nhaehnle
Reviewed By: nhaehnle
Subscribers: jdoerfert, nhaehnle, asb, rbar, johnrusso, simoncook, apazos, sabuasal, niosHD, jrtc27, zzheng, edward-jones, rogfer01, MartinMosbeck, brucehoult, the_o, PkmX, jocewei, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D58077
llvm-svn: 353862
This patch adds a -time-regions option to tablegen that can enable timers
(currently only one) that assess the performance of tablegen itself. This
can be useful for identifying scaling problems with tablegen backends.
This particular timer has allowed me to ignore time that is not attributed
the GISel combiner pass. It's useful by itself but it is particularly
useful in combination with https://reviews.llvm.org/D52954 which causes
this period of time to be annotated within Xcode Instruments which in turn
allows profile samples and recorded allocations attributed to reading
instructions to be filtered out.
llvm-svn: 353763
Allow the use of ninja instead of make. This is useful on some
platforms where we'd like to be able to limit the number of link jobs
without slowing down the other steps of the release.
This patch adds a -use-ninja command line option, which sets the
generator to Ninja both for LLVM and the test-suite. It also deals with
some differences between make and ninja:
* DESTDIR handling - ninja doesn't like this to be listed after the
target, but both make and ninja can handle it before the command
* Verbose mode - ninja uses -v, make uses VERBOSE=1
* Keep going mode - make has a -k mode, which builds as much as possible
even when failures are encountered; for ninja we need to set a hard
limit (we use 100 since most people won't look at 100 failures anyway)
I haven't tested with gmake.
llvm-svn: 353685
If we run into a pattern that looks like this:
add
(complex $x, $y)
(complex $x, $z)
We should skip the pattern instead of asserting/doing something unpredictable.
This makes us return an Error in that case, and adds a testcase for skipped
patterns.
Differential Revision: https://reviews.llvm.org/D57980
llvm-svn: 353586
This patch accompanies the RFC posted here:
http://lists.llvm.org/pipermail/llvm-dev/2018-October/127239.html
This patch adds a new CallBr IR instruction to support asm-goto
inline assembly like gcc as used by the linux kernel. This
instruction is both a call instruction and a terminator
instruction with multiple successors. Only inline assembly
usage is supported today.
This also adds a new INLINEASM_BR opcode to SelectionDAG and
MachineIR to represent an INLINEASM block that is also
considered a terminator instruction.
There will likely be more bug fixes and optimizations to follow
this, but we felt it had reached a point where we would like to
switch to an incremental development model.
Patch by Craig Topper, Alexander Ivchenko, Mikhail Dvoretckii
Differential Revision: https://reviews.llvm.org/D53765
llvm-svn: 353563
Mostly achieved by assuming that anything that isn't Win or Mac is ELF,
which seems reasonable enough for now.
Differential Revision: https://reviews.llvm.org/D57870
llvm-svn: 353470
As far as I can tell, malloc.h is only being used here to provide
a definition of mallinfo (malloc itself is declared in stdlib.h via
cstdlib). We already have a macro for whether mallinfo is available,
so switch to using that instead.
Differential Revision: https://reviews.llvm.org/D57807
llvm-svn: 353329
Not depending on //clang/lib/StaticAnalyzer/Core and
//clang/lib/StaticAnalyzer/Frontend causes a linker error even if
ClangSACheckers are not supported.
Undefined symbols for architecture x86_64:
"clang::ento::CreateAnalysisConsumer(clang::CompilerInstance&)", referenced from:
clang::tidy::ClangTidyASTConsumerFactory::CreateASTConsumer(
clang::CompilerInstance&, llvm::StringRef)
in libclangTidy.a(libclangTidy.ClangTidy.o)
Patch from Mirko Bonadei <mbonadei@webrtc.org>!
Differential Revision: https://reviews.llvm.org/D57777
llvm-svn: 353244
Summary:
While the backend code of FileCheck relies on definition of variable
from the command-line to have an equal sign '=' and a variable name
before that, the frontend does not actually enforce it. This leads to
FileCheck crashing when invoked with invalid syntax for the -D option.
This patch adds the missing validation in the frontend. It also makes
the -D option an AlwaysPrefix option to be able to detect -D=FOO as
being a define without variable and -D as missing its value.
Copyright:
- Linaro (changes in version 2 of revision D55940)
- GraphCore (changes in later versions)
Reviewers: jdenny
Subscribers: JonChesterfield, hiraditya, kristina, probinson,
llvm-commits
Differential Revision: https://reviews.llvm.org/D55940
llvm-svn: 353173
Trivial fix: decode was not called for all subprocess.check_output calls.
Commited on behalf of Andrew Boyarshin
Differential Revision: https://reviews.llvm.org/D57505
llvm-svn: 353168
NDK r19 includes a sysroot that can be used directly by the compiler
without creating a standalone toolchain, so we just need a handful
of flags to point Clang there.
Differential Revision: https://reviews.llvm.org/D57733
llvm-svn: 353139
Summary:
There are a few instructions that all map to the same opcode, so
when disassembling, we have to pick one. That was just the first one
before (the except_ref variant in the case of "call"), now it is the
one marked as IsCanonical in tablegen, or failing that, the shortest
name (which is typically the "canonical" one).
Also introduced a canonical "end" instruction for this purpose.
Reviewers: dschuff, tlively
Subscribers: sbc100, jgravelle-google, aheejin, llvm-commits, sunfish
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D57713
llvm-svn: 353131
The current build was producing names like llvm-undname.exe.pdb, which looks unusual to me at least. This switches them to the more common llvm-undname.pdb style.
Differential Revision: https://reviews.llvm.org/D57613
llvm-svn: 353099
The current build was producing names like llvm-undname.exe.pdb, which looks unusual to me at least. This switches them to the more common llvm-undname.pdb style.
Differential Revision: https://reviews.llvm.org/D57613
llvm-svn: 353094
Without /DEBUG, the /Zi doesn't on its own create PDB files.
And since ninja runs multiple compilations in parallel, we need /FS to prevent contention on PDBs.
Differential Revision: https://reviews.llvm.org/D57612
llvm-svn: 353093
LLVM_ENABLE_DAGISEL_COV can be used to instrument DAGISel tablegen
selection code to show which patterns along with Complex patterns were
used when selecting instructions. Unfortunately this is turned off by
default and was broken but never tested.
This required a simple fix (missing new line) to get it to build again.
llvm-svn: 353091
We'll need to do this eventually if we create an installable package.
For now, this lets me use the archives to build Android, whose build
system wants to copy the archives to another location.
Differential Revision: https://reviews.llvm.org/D57607
llvm-svn: 352907
check-llvm already listed llvm-lit as script which counts as a dep, so running
check-llvm worked fine, but `ninja -C out/gn llvm/test` didn't build llvm-lit
before if it wasn't already there.
llvm-svn: 352893
Simon Tatham