This patch adds the notion of a "path syntax" to FileSpec. There
are two syntaxes (Posix and Windows) and one "meta syntax",
Host Native, which uses the current platform to figure out the
appropriate syntax for host paths.
This allows paths from one platform to be represented and
manipulated on another platform even if they have different path
syntaxes.
llvm-svn: 215123
This patch moves the logic of many common socket operations into
its own class lldb_private::Socket. It then modifies the
ConnectionFileDescriptor class, and a few users of that class,
to use this new Socket class instead of hardcoding socket logic
directly.
Finally, this patch creates a common interface called IOObject for
any objects that support reading and writing, so that endpoints
such as sockets and files can be treated the same.
Differential Revision: http://reviews.llvm.org/D4641
Reviewed by: Todd Fiala, Greg Clayton
llvm-svn: 214984
the same parent frame, but different current frame - e.g. when
you step past a tail call exit from a function. Apply the same
"avoid-no-debug" rules to this case as for a "step-in".
<rdar://problem/16189225>
llvm-svn: 214946
CommandReturnObject. Otherwise, all the overridden command
can do is say it overrode the command, not say what it did...
Also removed the duplicate definition of CommandOverrideCallback
from the private interfaces.
Now to figure out how to get this through the SB API's...
<rdar://problem/17911629>
llvm-svn: 214938
DW_OP_fbreg(N) DW_OP_piece(4) DW_OP_fbreg(M) DW_OP_piece(8)
DW_OP_fbreg(N) DW_OP_piece(4) DW_OP_piece(8)
The first grabs 4 bytes from FP+N followed by 8 bytes from FP+M, the second grabs 4 bytes from FP+N followed by zero filling 8 bytes which are unavailable. Of course regiters are stuff supported:
DW_OP_reg3 DW_OP_piece(4) DW_OP_reg8 DW_OP_piece(8)
The fix does the following:
1 - don't push the full piece value onto the stack, keep it on the side
2 - fill zeros for DW_OP_piece(N) opcodes that have nothing on the stack (instead of previously consuming the full piece that was pushed onto the stack)
3 - simplify the logic
<rdar://problem/16930524>
llvm-svn: 214415
This is not bullet-proof, as you might end up running in a thread where you shouldn't, but the previous policy had the same drawback
Also, in cases where code-running formatters were being recursively applied, the previous policy caused deeper levels to fail, whereas this will at least get such scenarios to function
We might eventually want to consider disqualifying certain threads/frames for "viability", but I'd rather keep it simple until complexity is proven to be necessary
llvm-svn: 214337
Assuming that the user's home directory is at ~ is incorrect on
Windows. This patch delegates the request to LLVM's support
library, which already provides a cross-platform implementation
of this function.
Differential Revision: http://reviews.llvm.org/D4674
llvm-svn: 214093
i386, i486, i486sx, and i686 are all indistinguishable as far as
PE/COFF files are concerned. This patch adds support for all of
these architectures to PlatformWindows.
Differential Revision: http://reviews.llvm.org/D4658
llvm-svn: 214092
The code had moved forward with changes for using ProcessLaunchInfo,
but the documentation still referred to arguments that no longer
get passed to these methods.
llvm-svn: 213965
The uint16_t cast truncated the magic value to 0x00000304, making the
first byte 0 (eByteOrderInvalid) on big endian hosts.
Reported by Justin Hibbits.
llvm-svn: 213861
result variable and use in in "Process::LoadImage" so that,
for instance, "process load" doesn't increment the return
variable number.
llvm-svn: 213440
This value gets set to a max uint32_t value when there is no known limit; otherwise,
it is set to a value appropriate for the platform. For the moment, only
Linux, FreeBSD and NetBSD set it to 16. All other platforms set it to
the max uint32_t value.
Modifies the Process private state thread names to fit within a 16-character limit
when the max thread name length is <= 16. These guarantee that the thread names
can be distinguished within the first 16 characters. Prior to this change, those
threads had names in the final dotted name segment that were not distinguishable
within the first 16 characters.
llvm-svn: 213183
Any commands that want interactivity (stdin) will need to be executed through the normal command interpreter using the debugger's in/out/err file handles, or by using "command source".
Individual commands through the API will have their STDIN disabled. The STDOUT and STDERR will be redirected into the SBCommandReturnObject argument to SBCommandInterpreter::HandleCommand() as usual.
This helps with a deadlock situation in an IDE (Xcode) where the IDE was managing the breakpoint actions by setting a breakpoint callback and doing things manually.
<rdar://problem/17386271>
llvm-svn: 213023
The fix adds a std::weak_ptr<Module> into the TypeImpl and fills in the weak pointer when possible. It also checks to make sure the module is still alive prior to using it which should make our API safer to use.
<rdar://problem/15455145>
llvm-svn: 212853
This patch fixes a number of issues with embedded Python on
Windows. In particular:
1) The script that builds the python modules was normalizing the
case of python filenames during copies. The module name is
the filename, and is case-sensitive, so this was breaking code.
2) Changes the build to not attempt to link against python27.lib
(e.g. the release library) when linking against msvcrt debug
library. Doing a debug build of LLDB with embedded python
support now requires you to provide your own self-compiled
debug version of python.
3) Don't import termios when initializing the interpreter. This
is part of a larger effort to remove the dependency on termios
since it is not available on Windows. This particular instance
was unnecessary and unused.
Reviewed by: Todd Fiala
Differential Revision: http://reviews.llvm.org/D4441
llvm-svn: 212785
These fix the broken debian lldb build, which is using g++ 4.7.2.
TypeFormat changes:
1. stopped using the C++11 "dtor = default;" construct.
The generated default destructor in the two derived classes wanted
them to have a different throws() semantic that was causing 4.7 to
fail to generate it. I switched these to empty destructors defined
in the .cpp file.
2. Switched the m_types map from an ordered map to an unordered_map.
g++ 4.7's c++ library supports the C++11 emplace() used by TypeFormat
but the same c++ library's map impl does not. Since TypeFormat didn't
look like it depended on ordering in the map, I just switched it to
a std::unordered_map.
NativeProcessLinux - g++ 4.7 chokes on lexing the "<::" in
static_cast<::pid_t>(wpid). g++ 4.8+ and clang are fine with it.
I just put a space in between the "<" and the "::" and that cleared
it up.
llvm-svn: 212681
This reverses out the options validators changes. We'll get these
back in once the changes to the output can be resolved.
Restores broken tests on FreeBSD, Linux, MacOSX.
Changes reverted: r212500, r212317, r212290.
llvm-svn: 212543
This patch implements basic functionality of the "platform process
list" command for Windows. Currently this has the following
limitations.
* Certain types of filtering are not enabled (e.g. filtering by
architecture with -a), although most filters work.
* The username of the process is not yet obtained.
* Using -v to list verbose information generates an error.
* The architecture column displays the entire triple, leading to
misaligned formatting of the printed table.
Reviewed by: Greg Clayton
Differential Revision: http://reviews.llvm.org/D4413
llvm-svn: 212510
Windows uses a different process security model and does not have
a concept of process UID or GID. This patch makes these options
invalid on Windows. Attempting to specify these options when the
current platform is Windows will generate an error.
Reviewed by: Jim Ingham
Differential Revision: http://reviews.llvm.org/D4373
llvm-svn: 212500
This change removes the ScriptInterpreter::TerminateInterpreter() call which
ended up endlessly calling itself as things currently stand. It also cleans
up some other Windows-related cmake changes.
See http://lists.cs.uiuc.edu/pipermail/lldb-commits/Week-of-Mon-20140630/011544.html
for more details.
Change by Zachary Turner
llvm-svn: 212320
The purpose of the OptionValidator is to determine, based on some
arbitrary set of conditions, whether or not a command option is
valid for a given debugger state. An example of this might be
to selectively disable or enable certain command options that
don't apply to a particular platform.
This patch contains no functional change, and does not actually
make use of an OptionValidator for any purpose yet. A follow-up
patch will begin to add the logic and users of OptionValidator.
Reviewed by: Greg Clayton, Jim Ingham
Differential Revision: http://reviews.llvm.org/D4369
llvm-svn: 212290
Windows does support pipes, but they do so in a slightly different way. Added a Host layer which abstracts the use of pipes into a new Pipe class that everyone can use.
Windows benefits include:
- Being able to interrupt running processes when IO is directly hooked up
- being able to interrupt long running python scripts
- being able to interrupt anything based on ConnectionFileDescriptor
llvm-svn: 212220
off_t is a type which is used for file offsets. Even more
specifically, it is only used by a limited number of C APIs that
deal with files. Any usage of off_t where the variable is not
intended to be used with one of these APIs is a bug, by definition.
This patch corrects some easy mis-uses of off_t, generally by
converting them to lldb::offset_t, but sometimes by using other
types such as size_t, when appropriate.
The use of off_t to represent these offsets has worked fine in
practice on linux-y platforms, since we used _FILE_OFFSET_64 to
guarantee that off_t was a uint64. On Windows, however,
_FILE_OFFSET_64 is unrecognized, and off_t will always be 32-bit.
So the usage of off_t on Windows actually leads to legitimate bugs.
Reviewed by: Greg Clayton
Differential Revision: http://reviews.llvm.org/D4358
llvm-svn: 212192
- Ported the SWIG wrapper shell scripts to Python so that they would work on Windows too along with other platforms
- Updated CMake handling to fix SWIG errors and manage sym-linking on Windows to liblldb.dll
- More build fixes for Windows
The pending issues are that two Python modules, termios and pexpect are not available on Windows.
These are currently required for the Python command interpreter to be used from within LLDB.
llvm-svn: 212111
With _HAS_EXCEPTIONS=0, Windows' version of <thread> will fail to
compile because it calls __uncaught_exception(), which is compiled
out due to _HAS_EXCEPTIONS=0. This just creates a stub version
of __uncaught_exception() which always fails.
llvm-svn: 212076
This change brings in lldb-gdbserver (llgs) specifically for Linux x86_64.
(More architectures coming soon).
Not every debugserver option is covered yet. Currently
the lldb-gdbserver command line can start unattached,
start attached to a pid (process-name attach not supported yet),
or accept lldb attaching and launching a process or connecting
by process id.
The history of this large change can be found here:
https://github.com/tfiala/lldb/tree/dev-tfiala-native-protocol-linux-x86_64
Until mid/late April, I was not sharing the work and continued
to rebase it off of head (developed via id tfiala@google.com). I switched over to
user todd.fiala@gmail.com in the middle, and once I went to github, I did
merges rather than rebasing so I could share with others.
llvm-svn: 212069
Elevate ProcessInfo and ProcessLaunchInfo into their own headers.
llgs will be using ProcessLaunchInfo but doesn't need to pull in
the rest of Process.h.
This also moves a bunch of implementation details from the header
declarations into ProcessInfo.cpp and ProcessLaunchInfo.cpp.
Tested on Ubuntu 14.04 Cmake and MacOSX Xcode.
Related to https://github.com/tfiala/lldb/issues/26.
llvm-svn: 212005
Previously, only the starting locations of the candidate interval
and the existing interval were compared. To correctly detect
range intersections, it is necessary to compare the entire range
of both intervals against each other.
Reviewed by: scallanan
Differential Revision: http://reviews.llvm.org/D4286
llvm-svn: 211726
The patch is as is with the functionality left disabled for apple vendors because of performance regressions. If this is enabled it ends up searching for symbols in all shared libraries that are loadeded.
llvm-svn: 211638
process fully reaped. The race & bad behavior was because we were letting
the reaping thread in LLDB to also set the Process exit status, so debugserver
would sometimes be shut down before it got a chance to report the exit status,
and then we got confused.
<rdar://problem/16555850>
llvm-svn: 211636
See http://reviews.llvm.org/D4221 for details.
This commit allows you to control the signals that lldb will suppress, stop or forward using the Python and C++ APIs.
Change by Russell Harmon.
Xcode build system changes (and any mistakes) by Todd Fiala. Tested on MacOSX 10.9.3 and Xcode 6 beta. (Xcode 5 is hitting the dependency checker crasher on all my systems).
llvm-svn: 211526
to modify the same UnwindTable object simultaneously. Fix
HistoryThread and HistoryUnwind's mutex lock acqusition to
retain the lock for the duration of the operation instead of
releasing the temporary immediately.
<rdar://problem/17055023>
llvm-svn: 211241
lldb support. I'll be doing more testing & cleanup but I wanted to
get the initial checkin done.
This adds a new SBExpressionOptions::SetLanguage API for selecting a
language of an expression.
I added adds a new SBThread::GetInfoItemByPathString for retriving
information about a thread from that thread's StructuredData.
I added a new StructuredData class for representing
key-value/array/dictionary information (e.g. JSON formatted data).
Helper functions to read JSON and create a StructuredData object,
and to print a StructuredData object in JSON format are included.
A few Cocoa / Cocoa Touch data formatters were updated by Enrico
to track changes in iOS 8 / Yosemite.
Before we query a thread's extended information, the system runtime may
provide hints to the remote debug stub that it will use to retrieve values
out of runtime structures. I added a new SystemRuntime method
AddThreadExtendedInfoPacketHints which allows the SystemRuntime to add
key-value type data to the initial request that we send to the remote stub.
The thread-format formatter string can now retrieve values out of a thread's
extended info structured data. The default thread-format string picks up
two of these - thread.info.activity.name and thread.info.trace_messages.
I added a new "jThreadExtendedInfo" packet in debugserver; I will
add documentation to the lldb-gdb-remote.txt doc soon. It accepts
JSON formatted arguments (most importantly, "thread":threadnum) and
it returns a variety of information regarding the thread to lldb
in JSON format. This JSON return is scanned into a StructuredData
object that is associated with the thread; UI layers can query the
thread's StructuredData to see if key-values are present, and if
so, show them to the user. These key-values are likely to be
specific to different targets with some commonality among many
targets. For instance, many targets will be able to advertise the
pthread_t value for a thread.
I added an initial rough cut of "thread info" command which will print
the information about a thread from the jThreadExtendedInfo result.
I need to do more work to make this format reasonably.
Han Ming added calls into the pmenergy and pmsample libraries if
debugserver is run on Mac OS X Yosemite to get information about the
inferior's power use.
I added support to debugserver for gathering the Genealogy information
about threads, if it exists, and returning it in the jThreadExtendedInfo
JSON result.
llvm-svn: 210874
(lldb) file /bin/ls
(lldb) b malloc
(lldb) run
(lldb) process save-core /tmp/ls.core
Each ObjectFile plug-in now has the option to save core files by registering a new static callback.
llvm-svn: 210864
lldb-gdbserver and NativeProcessProtocol will use MemoryRegionInfo
but don't want to pull in Process.h. Pull this declaration and
definition out into its own header.
llvm-svn: 210213
- Fix Xcode project to have source files for SBTypeEnumMember.h/SBTypeEnumMember.cpp in the right place
- Rename a member variable to inluce "_sp" suffix since it is a shared pointer
- Cleanup initialization code for TypeEnumMemberImpl to not warn about out of order initialization
llvm-svn: 210051
of the symbol itself rather than forcing clients to do
it. This simplifies the logic for the expression
parser a great deal.
<rdar://problem/16935324>
llvm-svn: 209494
and sharing it with all of its FuncUnwinders, have each FuncUnwinder
create an AssemblyProfiler on demand as needed. I was worried that
the cost of creating the llvm disassemblers would be high for this
approach but it's not supposed to be an expensive operation, and it
means we don't need to add locks around this section of code.
<rdar://problem/16992332>
llvm-svn: 209493
to its unwind assembly profiler to all of the FuncUnwinders (one
per symbol) under it. If lldb is running multiple targets, you
could get two different FuncUnwinders in the same Module trying
to use the same llvm disassembler simultaneously and that may be
a re-entrancy problem.
Instead, the UnwindTable has the unwind assembly profiler and when
the FuncUnwinders want to use it, they get exclusive access to
the assembly profiler until they're done using it.
<rdar://problem/16992332>
llvm-svn: 209488
Rationale:
Pretty simply, the idea is that sometimes type names are way too long and contain way too many details for the average developer to care about. For instance, a plain ol' vector of int might be shown as
std::__1::vector<int, std::__1::allocator<....
rather than the much simpler std::vector<int> form, which is what most developers would actually type in their code
Proposed solution:
Introduce a notion of "display name" and a corresponding API GetDisplayTypeName() to return such a crafted for visual representation type name
Obviously, the display name and the fully qualified (or "true") name are not necessarily the same - that's the whole point
LLDB could choose to pick the "display name" as its one true notion of a type name, and if somebody really needs the fully qualified version of it, let them deal with the problem
Or, LLDB could rename what it currently calls the "type name" to be the "display name", and add new APIs for the fully qualified name, making the display name the default choice
The choice that I am making here is that the type name will keep meaning the same, and people who want a type name suited for display will explicitly ask for one
It is the less risky/disruptive choice - and it should eventually make it fairly obvious when someone is asking for the wrong type
Caveats:
- for now, GetDisplayTypeName() == GetTypeName(), there is no logic to produce customized display type names yet.
- while the fully-qualified type name is still the main key to the kingdom of data formatters, if we start showing custom names to people, those should match formatters
llvm-svn: 209072
Use a map rather than a vector to store the objects managed by the shared
cluster since mostly want this for random lookup, so the map is much faster.
llvm-svn: 209010
the SystemRuntime to check if a thread will have any problems
performing an inferior function call so the driver can skip
making that function call on that thread. Often the function
call can be executed on another thread instead.
<rdar://problem/16777874>
llvm-svn: 208732
Python defines _XOPEN_SOURCE and _POSIX_C_SOURCE unconditionally. On Linux,
this is problematic as glibc's features.h defines these values if _GNU_SOURCE is
defined to the value that is currently implemented. Python defines it to the
versions that it requires, which may be different. Undefine the macros on Linux
(technically, this should be safe to do globally) before including the python
headers.
llvm-svn: 208520
Add a callback that will allow an expression to be cancelled between the
expression evaluation stages (for the ClangUserExpressions.)
<rdar://problem/16790467>, <rdar://problem/16573440>
llvm-svn: 207944
- CTRL+C wasn't clearing the command in lldb
- CTRL+C doesn't work in python macros in lldb
- Ctrl+C no longer interrupts the running process that you attach to
<rdar://problem/15949205>
<rdar://problem/16778652>
<rdar://problem/16774411>
llvm-svn: 207816
Currently if you run _any_ python, python has the "lldb.debugger" global variable and it has a strong reference to a lldb_private::Debugger since it is a lldb::SBDebugger object with a shared pointer.
This makes sure that your LLDB command interpreter history is saved each time you quit command line LLDB.
llvm-svn: 207164
currently associated with a given thread, on relevant targets.
Change the queue detection code to verify that the queues
associated with all live threads are included in the list.
<rdar://problem/16411314>
llvm-svn: 207160
This decision has always been statically-bound to the individual formatter. With this patch, the idea is that this decision could potentially be dynamic depending on the ValueObject itself
llvm-svn: 207046
Enable data formatters to see-through pointers/references to typedefs
For instance, if Foo is a typedef to Bar, and there is a formatter for any/all of Bar*, Bar&, Bar&&, then Foo*, Foo&, and Foo&& should pick these up if Foo-specific formatters don't exist
llvm-svn: 205939
SBTarget::AddModule(const char *path,
const char *triple,
const char *uuid_cstr,
const char *symfile);
If "symfile" was filled in, it would cause us to not correctly add the module. Same goes for:
SBTarget::AddModule(SBModuleSpec ...)
Where you filled in the symfile.
<rdar://problem/16529799>
llvm-svn: 205750
This fix reduces the stack size of SymbolFileDWARF::ParseType(). It seems that clang is not very good at sharing locations on the stack with local variables in large functions that have many blocks and each variable gets unique locations. The reduction in size was done by:
1 - removing some large locals that were default constructed by not used
2 - Placing some larger local variables into std::unique_ptr<> to make them on the heap
3 - removing local variables there were large and being populated but not being used
4 - reducing the size of some typedefs to llvm::SmallVector<T, N> so that N wasn’t excessively large
<rdar://problem/16431645>
llvm-svn: 205640
This is a purely mechanical change explicitly casting any parameters for printf
style conversion. This cleans up the warnings emitted by gcc 4.8 on Linux.
llvm-svn: 205607
You can either provide the function name, or function body text.
Also propagate the compilation error up from where it is checked so we can report compilation errors.
<rdar://problem/9898371>
llvm-svn: 205380
For some reason, the libc++ vector<bool> data formatter was essentially a costly no-up, doing everything required of it, except actually generating the child values!
This restores its functionality
llvm-svn: 205259
These changes were written by Greg Clayton, Jim Ingham, Jason Molenda.
It builds cleanly against TOT llvm with xcodebuild. I updated the
cmake files by visual inspection but did not try a build. I haven't
built these sources on any non-Mac platforms - I don't think this
patch adds any code that requires darwin, but please let me know if
I missed something.
In debugserver, MachProcess.cpp and MachTask.cpp were renamed to
MachProcess.mm and MachTask.mm as they picked up some new Objective-C
code needed to launch processes when running on iOS.
llvm-svn: 205113
Add a GetFoundationVersion() to AppleObjCRuntime
This API is used to return and cache the major version of Foundation.framework, which is potentially a useful piece of data to key off of to enable or disable certain ObjC related behaviors (especially in data formatters)
llvm-svn: 204756
(lldb) b puts
(lldb) expr -g -i0 -- (int)puts("hello")
First we will stop at the entry point of the expression before it runs, then we can step over a few times and hit the breakpoint in "puts", then we can continue and finishing stepping and fininsh the expression.
Main features:
- New ObjectFileJIT class that can be easily created for JIT functions
- debug info can now be enabled when parsing expressions
- source for any function that is run throught the JIT is now saved in LLDB process specific temp directory and cleaned up on exit
- "expr -g --" allows you to single step through your expression function with source code
<rdar://problem/16382881>
llvm-svn: 204682
PATH_MAX is defined if it is not already defined. A duplicate
definition is removed. The declaration of struct timespec is moved
outside #ifdef _MSC_VER to make it available for mingw.
llvm-svn: 204449
for customizing "step-in" behavior (e.g. step-in doesn't step into code with no debug info), but also
the behavior of step-in/step-out and step-over when they step out of the frame they started in.
I also added as a proof of concept of this reworking a mode for stepping where stepping out of a frame
into a frame with no debug information will continue stepping out till it arrives at a frame that does
have debug information. This is useful when you are debugging callback based code where the callbacks
are separated from the code that initiated them by some library glue you don't care about, among other
things.
llvm-svn: 203747
This header is generally not available on mingw and can cause build errors.
The windows host code does provide timespec definition that can be used for
mingw case.
llvm-svn: 203555
Seed the QueueItem objects with the item_refs and addresses when they are fetched
in one batch. If additional information is needed from the QueueItem, fetch it
lazily one pending item per function call.
<rdar://problem/16270007>, <rdar://problem/16032150>
llvm-svn: 203449
changing the data it returns; this change accepts either the old format or
the new format. It doesn't yet benefit from the new format's additions -
but I need to get this checked in so we aren't rev-locked.
Also add a missing .i entry for SBQueue::GetNumRunningItems() missing from
the last checkin.
<rdar://problem/16272115>
llvm-svn: 203421
items; the backing Queue object has the number of pending items
already cached. Also, add SBQueue::GetNumRunningItems() to provide
that information.
<rdar://problem/16272016>
llvm-svn: 203420
Please do not add header files that are required in public APIs without first checking with us. This broke the LLDB builds at Apple because the lldb-dll-export.h wasn't included in the LLDB.framework and it was being included by public API header files.
llvm-svn: 203177
hold a strong pointer to that extended backtrace thread in the Process
just like we do for asking a thread's extended backtrace.
Also, give extended backtrace threads an invalid ThreadIndexID number.
We'll still give them valid thread_id's. Clients who want to know the
original thread's IndexID can call GetExtendedBacktraceOriginatingIndexID().
<rdar://problem/16126034>
llvm-svn: 203088
read during materialization. First of all, report
if we can't read the data for some reason. Second,
consult the ValueObject's error and report that if
there's some problem.
<rdar://problem/16074201>
llvm-svn: 202552
I carefully reviewed exactly how the IOHandlers interact and found places where we weren't properly controlling things. There should be no overlapping prompts and all output should now come out in a controlled fashion.
<rdar://problem/16111293>
llvm-svn: 202525
Also remove SetStopOthers from the ThreadPlanCallFunction, because if the value you have doesn't match what is
in the EvaluateExpressionOptions the plan was passed when created it won't work correctly.
llvm-svn: 202464
The way in which we were determining whether a python module had already been imported in the current session stopped working due to the IOHandler changes
As a result, importing in a new debug session a module which had been imported in a previous session did not work
This commit restores that functionality by checking for the module's presence in the session dictionary (which should be more correct anyway)
llvm-svn: 201623
Fix a bug where calling SBFrame::FindValue() would cause a copy of all variables in the block to be inserted in the frame's variable list, regardless of whether those same variables were there or not - which means one could end up with a frame with lots of duplicate copies of the same variables
llvm-svn: 201614
specify a list of functions which should be treated as trap handlers.
This will be primarily useful to people working in non-user-level
process debugging - kernels and other standalone environments.
For most people, the trap handler functions provided by the Platform
plugin will be sufficient.
<rdar://problem/15835846>, <rdar://problem/15982682>
llvm-svn: 201386
add a new pure virtual CalculateTrapHandlerSymbolNames() that Platform
subclasses must implement which fills in the function name list with any
trap handlers that are expected on that platform.
llvm-svn: 201364
aka asynchronous signal handlers, which subclasses should fill
in as appropriate. For most Unix user process environments,
the one entry in this list is _sigtramp. For bare-board and
kernel environments, there will be different sets of trap
handlers.
The unwinder needs to know when a frame is a trap handler
because the rules it enforces for the frame "above" the
trap handler is different from most middle-of-the-stack frames.
<rdar://problem/15835846>
llvm-svn: 201300
ObjectFile::SetLoadAddress (Target &target,
lldb::addr_t value,
bool value_is_offset);
Now "value" is a slide if "value_is_offset" is true, and "value" is an image base address otherwise. All previous usage of this API was using slides.
Updated the ObjectFileELF and ObjectFileMachO SetLoadAddress methods to do the right thing.
Also updated the ObjectFileMachO::SetLoadAddress() function to not load __LINKEDIT when it isn't needed and to only load sections that belong to the executable object file.
llvm-svn: 201003
Move some code that was in DynamicLoaderPOSIXDLYD into the
base class DynamicLoader. In the case of UpdateLoadedSections(),
the test to see whether a file is loadable (its address is zero)
is not generally applicable so that test is changed to a more
universally applicable check for the SHF_ALLOC flag on the section.
Also make it explicit that the reading of the module_id in
DynamicLoaderPOSIXDYLD::GetThreadLocalData() is using a hardcoded
size (of module_id) of 4, which might not be appropriate on
big-endian 64-bit systems, leaving a FIXME comment in place.
llvm-svn: 200939
- empty lines in init files would repeat previous command and cause errors to be displayed
- all options to control showing the command, its output, if it should stop on error or continue, weren't being obeyed.
llvm-svn: 200860
libldi library to collect extended backtrace information; switch
to the libBacktraceRecording library and its APIs. Complete the
work of adding QueueItems to Queues and allow for the QueueItems
to be interrogated about their extended backtraces in turn.
There's still cleanup and documentation to do on this code but the
code is functional and I it's a good time to get the work-in-progress
checked in.
<rdar://problem/15314027>
llvm-svn: 200822
The many many benefits include:
1 - Input/Output/Error streams are now handled as real streams not a push style input
2 - auto completion in python embedded interpreter
3 - multi-line input for "script" and "expression" commands now allow you to edit previous/next lines using up and down arrow keys and this makes multi-line input actually a viable thing to use
4 - it is now possible to use curses to drive LLDB (please try the "gui" command)
We will need to deal with and fix any buildbot failures and tests and arise now that input/output and error are correctly hooked up in all cases.
llvm-svn: 200263
GDBRemoteCommunicationServer::LaunchProcess () now uses the built-up
ProcessLaunchArgs rather than clearing and setting items from the
function arguments. I added setters for the arguments and launch
flags, which lldb-gdbserver uses for its specification of the
commandline-specified startup app (if one is specified).
LaunchProcess () also adds a new reaper monitor that it applies to
the launched process if no process monitor has already been applied.
This addresses an issue where the 'k' command would generate (possibly
false) warnings about not being able to positively state whether a
killed process actually terminated. GDBRemoteCommunicationServer now
definitely knows the disposition of its children.
llvm-svn: 199959
SBType SBType::GetTypedefedType();
Also added the ability to get a type by type ID from a SBModule:
SBType SBModule::GetTypeByID (lldb::user_id_t uid);
llvm-svn: 199939
This fixes a bug under Linux where spawning a process via
Host::LaunchProcess was disabling all blockable signals on the
launched process. This caused strange behavior when attempting
to kill the lldb-gdbserver process, as the child generally would
not die unless killed with a non-blockable signal (e.g. 'kill -9').
This change moves several functions out of macosx/Host.mm into
common/Host.cpp. In addition, two functions that needed to work
across common/Host.cpp and macosx/Host.mm were moved into the Host.h
header file.
llvm-svn: 199856
ArchSpec now contains an optional distribution_id, with getters and
setters. Host::GetArchitecture () sets it on non-Apple platforms using
Host::GetDistributionId (). The distribution_id is ignored during
ArchSpec comparisons.
The gdb remote qHostInfo message transmits it, if set, via the
distribution_id={id-value} key/value pair. Updated gdb remote docs to
reflect this change.
As before, GetDistributionId () returns nothing on non-Linux platforms
at this time. On Linux, it is returned only if the lsb_platform
command is installed (in /bin or /usr/bin), and only if the
distributor id key is returned by 'lsb_platform -i'. This id is
lowercased, and whitespace is replaced with underscores.
llvm-svn: 199539
This change does the following:
* enables building lldb-gdbserver on linux_x86-64 platforms.
Note - it builds but it has several run-time issues where many gdb
remote protocol features are not properly implemented yet. I'm
working on these one at a time.
* lldb-gdbserver: does not enable the eLaunchFlagDebug launch flag on
Linux. Currently the POSIX launch routine will assert if that flag
is passed in, presumably because that launch mode is not yet
available. This prevents lldb-gdbserver from asserting the moment
it launches the debuggee process.
* Adds ConstString& Host::GetDistributionId ()
This method is defined to return an empty result on all platforms
except for Linux. On Linux, it makes one attempt to execute
'lsb_release -i' (both /usr/bin/lsb_release, where it appears
on ubuntu, and /bin/lsb_release, where it appears on fedora
if the redhat-lsb package is installed). If lsb_release is not
found in either of those locations, or if 'lsb_release -i' does
not return the first line starting with "Distributor ID:\t",
then the distribution id is empty. The method will lower-case
the id and replace whitespace with underscores.
* Modify Host::GetArchitecture () so that linux replaces an unknown
vendor portion with the results of GetDistributionId () if that
is non-empty. This shows up now in qHostInfo remote packet
responses and on the lldb host side. Tested with ubuntu and
fedora (the latter both with the default of not having lsb_release
installed, and with having lsb_release installed via the redhat-lsb
package).
Examples of triples on Linux after this change:
# x86_64 Unbuntu 12.04 LTS:
x86_64-ubuntu-linux-gnu
# x86_64 Fedora 20 Desktop with redhat-lsb package installed
x86_64-fedora-linux-gnu
# x86_64 Fedora 20 Desktop without redhat-lsb-core installed
# (i.e. no /bin/lsb_release available)
# same as before the change
x86_64--linux-gnu
Note I intend to have Android respond with:
{arch}-android-linux
when I get to implementing Android lldb-gdbserver support.
llvm-svn: 199510
This rename was suggested by gclayton as a way to silence gcc
warnings; the warning is emitted when there is an overloaded function
in a base class (Platform) for which a derived class redefines one of
the overloads but not the other (because doing so hides the other
overload from users of the derived class). By giving the two methods
different names, the situation is avoided.
llvm-svn: 199504
symbols correctly. There were a couple of pieces to this.
1) When a breakpoint location finds itself pointing to an Indirect symbol, when the site for it is created
it needs to resolve the symbol and actually set the site at its target.
2) Not all breakpoints want to do this (i.e. a straight address breakpoint should always set itself on the
specified address, so somem machinery was needed to specify that.
3) I added some info to the break list output for indirect symbols so you could see what was happening.
Also I made it clear when we re-route through re-exported symbols.
4) I moved ResolveIndirectFunction from ProcessPosix to Process since it works the exact same way on Mac OS X
and the other posix systems. If we find a platform that doesn't do it this way, they can override the
call in Process.
5) Fixed one bug in RunThreadPlan, if you were trying to run a thread plan after a "running" event had
been broadcast, the event coalescing would cause you to miss the ThreadPlan running event. So I added
a way to override the coalescing.
6) Made DynamicLoaderMacOSXDYLD::GetStepThroughTrampolinePlan handle Indirect & Re-exported symbols.
<rdar://problem/15280639>
llvm-svn: 198976
The "type format add" command gets a new flag --type (-t). If you pass -t <sometype>, upon fetching the value for an object of your type,
LLDB will display it as-if it was of enumeration type <sometype>
This is useful in cases of non-contiguous enums where there are empty gaps of unspecified values, and as such one cannot type their variables as the enum type,
but users would still like to see them as-if they were of the enum type (e.g. DWARF field types with their user-reserved ranges)
The SB API has also been improved to handle both types of formats, and a test case is added
llvm-svn: 198105
TypeFormatImpl used to just wrap a Format (and Flags for matching), and then ValueObject itself would do the printing deed
With this checkin, the responsibility of generating a value string is centralized in the data formatter (as it should, and already is for summaries)
This change is good practice per se, and should also enable us to extend the type format mechanism in a cleaner way
llvm-svn: 197874
So, rename the class for what it truly is: a FormattersContainer
Also do a bunch of related text substitutions in the interest of overall naming clarity
llvm-svn: 197795
While investigating test suite failures when running the test suite remotely, I noticed we had 3 copies of code that launched a process:
1 - in "process launch" command
2 - SBTarget::Launch() with args
3 - SBTarget::Launch() with SBLaunchInfo
"process launch" was launching through the platform if it was supported (this is needed for remote debugging) and the 2 and 3 were not.
Now all code is in one place.
llvm-svn: 197247
libdispatch aka Grand Central Dispatch (GCD) queues. Still fleshing out the
documentation and testing of these but the overall API is settling down so it's
a good time to check it in.
<rdar://problem/15600370>
llvm-svn: 197190
Previously, an opcode set via SetOpcode32 (for example) was later
extracted via GetData() as a byte sequence in host order rather than
target order.
Review: http://llvm-reviews.chandlerc.com/D1838
llvm-svn: 196808
<rdar://problem/15314403>
This patch adds a new lldb_private::SectionLoadHistory class that tracks what shared libraries were loaded given a process stop ID. This allows us to keep a history of the sections that were loaded for a time T. Many items in history objects will rely upon the process stop ID in the future.
llvm-svn: 196557
This gets rid of our hacky "get_random_port()" which would grab a random port and tell debugserver to open that port. Now LLDB creates, binds, listens and accepts a connection by binding to port zero and sending the correctly bound port down as the host:port to connect back to.
Fixed the "ConnectionFileDescriptor" to be able to correctly listen for connections from a specified host, localhost, or any host. Prior to this fix "listen://" only accepted the following format:
listen://<port>
But now it can accept:
listen://<port> // Listen for connection from localhost on port <port>
listen://<host>:<port> // Listen for connection from <host> and <port>
listen://*:<port> // Listen for connection from any host on port <port>
llvm-svn: 196547
This is not being used yet, and in practice, more refactoring would be required to make this fully practical
In practice, the way this should work is that CalculateNumChildren(), GetChildAtIndex(), GetIndexOfChildWithName() and MightHaveChildren() should all default to failure values when m_valid == false. Update() should be the only function actually setting/clearing the flag upon inspecting the backend ValueObject, if it determines it to be in an incongruent state
Given refactoring of the FrontEnd APIs, this work could be automatically performed without the individual providers having to replicate this logic
The way this works now is that each front end picks one or more “key ivars” and keys off those to detect invalidity
This is a baby step 0 to a better world
llvm-svn: 196452
This will get the temporary directory on the current system.
Removed a call to tmpnam() and replaced it with a call to mktemp() using a template that will be in the temp directory.
llvm-svn: 196397
the build being broken for people using the public Mac OS X 10.9 SDK,
which does not have the Python framework any longer. The Xcode project
file already sets the -I and -L flags correctly so that <Python.h> and
-lpython will work correctly with the system's installed Python.
llvm-svn: 196259
This should probably be replaced with build infrastructure support for
a platform-specific canonical Python include path, but for now it should
restore the FreeBSD buildbot.
llvm-svn: 196167
lldb_private::Debugger was #including some "lldb/API" header files which causes tools (lldb-platform and lldb-gdbserver) that link against the internals only (no API layer) to fail to link depending on which calls were being used.
Also fixed the current working directory so that it gets set correctly for remote test suite runs. Now the remote working directory is set to: "ARCH/TESTNUM/..." where ARCH is the current architecture name and "TESTNUM" is the current test number.
Fixed the "lldb-platform" and "lldb-gdbserver" to not warn about mismatched visibility settings by having each have their own exports file which contains nothing. This forces all symbols to not be exported, and also quiets the linker warnings.
llvm-svn: 196141
Jason Molenda