The code reusing existing wait counts is incorrect since it keeps
adding new operands to an old instruction instead of replacing
the immediate. It was also effectively switched off by the condition
that wait count is not an AMDGPU::S_WAITCNT.
Also switched to BuildMI instead of creating instructions directly.
Differential Revision: https://reviews.llvm.org/D42997
llvm-svn: 324547
hit from IR but creates a minefield for MI passes.
The x86 backend has fairly powerful logic to try and fold loads that
feed register operands to instructions into a memory operand on the
instruction. This is almost always a good thing, but there are specific
relocated loads that are only allowed to appear in specific
instructions. Notably, R_X86_64_GOTTPOFF is only allowed in `movq` and
`addq`. This patch blocks folding of memory operands using this
relocation unless the target is in fact `addq`.
The particular relocation indicates why we simply don't hit this under
normal circumstances. This relocation is only used for TLS, and it gets
used in very specific ways in conjunction with %fs-relative addressing.
The result is that loads using this relocation are essentially never
eligible for folding into an instruction's memory operands. Unless, of
course, you have an MI pass that inserts usage of such a load. I have
exactly such an MI pass and was greeted by truly mysterious miscompiles
where the linker replaced my instruction with a completely garbage byte
sequence. Go team.
This is the only such relocation I'm aware of in x86, but there may be
others that need to be similarly restricted.
Fixes PR36165.
Differential Revision: https://reviews.llvm.org/D42732
llvm-svn: 324546
We were doing a lot of whitelisting of what we handle in these routines, but setOperationAction constrains what we can get here. So just add some asserts and prune the unreachable paths.
llvm-svn: 324538
If we are saving/restoring k-registers, the default behavior of getMinimalRegisterClass will find the VK64 class with a spill size of 64 bits. This will cause the KMOVQ opcode to be used for save/restore. If we don't have have BWI instructions we need to constrain the class returned to give us VK16 with a 16-bit spill size. We can do this by passing the either v16i1 or v64i1 into getMinimalRegisterClass.
Also add asserts to make sure BWI is enabled anytime we use KMOVD/KMOVQ. These are what caught this bug.
Fixes PR36256
Differential Revision: https://reviews.llvm.org/D42989
llvm-svn: 324533
Note: This is a candidate for LLVM 6.0, because it was planned to be
in that release but was delayed due to a long review period.
Merge conflict in release_60 - resolution:
Add "-p6:32:32" into the second (non-amdgiz) string.
Only scalar loads support 32-bit pointers. An address in a VGPR will
fail to compile. That's OK because the results of loads will only be used
in places where VGPRs are forbidden.
Updated AMDGPUAliasAnalysis and used SReg_64_XEXEC.
The tests cover all uses cases we need for Mesa.
Reviewers: arsenm, nhaehnle
Subscribers: kzhuravl, wdng, yaxunl, dstuttard, tpr, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D41651
llvm-svn: 324487
Summary:
I checked the AMD closed source compiler and the workaround is only
needed when x3 is emulated as x4, which we don't do in LLVM.
SMEM x3 opcodes don't exist, and instead there is a possibility to use x4
with the last component being unused. If the last component is out of
buffer bounds and falls on the next 4K page, the hw hangs.
Reviewers: arsenm, nhaehnle
Subscribers: kzhuravl, wdng, yaxunl, dstuttard, tpr, llvm-commits, t-tye
Differential Revision: https://reviews.llvm.org/D42756
llvm-svn: 324486
Both operand codes now work the same way in case of register or memory
operands. It print high-order or low-order word in a double-word
register or memory location.
llvm-svn: 324476
This is a follow up of r324321, adding a match pattern for mov with a FP16
immediate (also fixing operand vfp_f16imm that wasn't even compiling).
Differential Revision: https://reviews.llvm.org/D42973
llvm-svn: 324456
that happened to end up in GCC.
This is really unfortunate, as the names don't have much rhyme or reason
to them. Originally in the discussions it seemed fine to rely on aliases
to map different names to whatever external thunk code developers wished
to use but there are practical problems with that in the kernel it turns
out. And since we're discovering this practical problems late and since
GCC has already shipped a release with one set of names, we are forced,
yet again, to blindly match what is there.
Somewhat rushing this patch out for the Linux kernel folks to test and
so we can get it patched into our releases.
Differential Revision: https://reviews.llvm.org/D42998
llvm-svn: 324449
1. Run the memory legalizer prior to the waitcnt pass; keep the policy that the waitcnt pass does not remove any waitcnts within the incoming IR.
2. The waitcnt pass doesn't (yet) track waitcnts that exist prior to the waitcnt pass (it just skips over them); because the waitcnt pass is ignorant of them, it may insert a redundant waitcnt. To avoid this, check the prev instr. If it and the to-be-inserted waitcnt are the same, suppress the insertion. We keep the existing waitcnt under the assumption that whomever, e.g., the memory legalizer, inserted it knows what they were doing.
3. Follow-on work: teach the waitcnt pass to record the pre-existing waitcnts for better waitcnt production.
Differential Revision: https://reviews.llvm.org/D42854
llvm-svn: 324440
X86 currently has a late DAG combine after cttz/ctlz are turned into BSR+BSF+CMOV to detect this and remove the CMOV. But we should be able to do this much earlier and avoid creating the cmov all together.
For the changed AMDGPU test case it appears that previously the i8 cttz was type legalized to i16 which introduced an OR with 256 in order to limit the result to 8 on the widened type. At this point the result is known to never be zero, but nothing checked that. Then operation legalization is told to promote all i16 cttz to i32. This introduces an extend and a truncate and another OR with 65536 to limit the result to 16. With the DAG combiner change we are able to prevent the creation of the second OR since the opcode will have been changed to cttz_zero_undef after the first OR. I the lack of the OR caused the instruction to change to v_ffbl_b32_sdwa
Differential Revision: https://reviews.llvm.org/D42985
llvm-svn: 324427
Following up on the discussion from
http://lists.llvm.org/pipermail/llvm-dev/2017-April/112305.html, undef
values are now placed in the .bss as well as null values. This prevents
undef global values taking up potentially huge amounts of space in the
.data section.
The following two lines now both generate equivalent .bss data:
@vals1 = internal unnamed_addr global [20000000 x i32] zeroinitializer, align 4
@vals2 = internal unnamed_addr global [20000000 x i32] undef, align 4 ; previously unaccounted for
This is primarily motivated by the corresponding issue in the Rust
compiler (https://github.com/rust-lang/rust/issues/41315).
Differential Revision: https://reviews.llvm.org/D41705
Patch by varkor!
llvm-svn: 324424
It was always using cmpxchg path and in rmw and cmpxchg instructions
are not distinguishable in the BE.
Differential Revision: https://reviews.llvm.org/D42976
llvm-svn: 324383
This is a follow up of r324321, adding f16 <-> f32 and f16 <-> f64 conversion
match patterns.
Differential Revision: https://reviews.llvm.org/D42954
llvm-svn: 324360
Instruction Selection
Cleanup cycle/validity checks in ISel (IsLegalToFold,
HandleMergeInputChains) and X86 (isFusableLoadOpStore). Now do a full
search for cycles / dependencies pruning the search when topological
property of NodeId allows.
As part of this propogate the NodeId-based cutoffs to narrow
hasPreprocessorHelper searches.
Reviewers: craig.topper, bogner
Subscribers: llvm-commits, hiraditya
Differential Revision: https://reviews.llvm.org/D41293
llvm-svn: 324359
Vector pairs are legal types, but not every operation can work on pairs.
For those operations that are legal for single vectors, generate a concat
of their results on pair halves.
llvm-svn: 324350
It was expanded directly into instructions earlier. That was to avoid
loads from a constant pool for a vector negation: "xor x, splat(i1 -1)".
Implement ISD opcodes QTRUE and QFALSE to denote logical vectors of
all true and all false values, and handle setcc with negations through
selection patterns.
llvm-svn: 324348
Followup to D42544 that matches PACKUSWB cases for non-AVX512, SSE and PACKUSDW cases will have to wait until we can add support for general SMIN/SMAX matching.
llvm-svn: 324347
Summary:
Now we generate PAL metadata for the amdpal os type, there is no need to
generate the .AMDGPU.config section.
Reviewers: arsenm, nhaehnle, dstuttard
Subscribers: kzhuravl, wdng, yaxunl, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D37760
Change-Id: I303c5fad66656ce97293da60621afac6595b4c18
llvm-svn: 324346
Summary: Adds support for the SVE AND instruction with vector and logical-immediate operands, and their corresponding aliases.
Reviewers: fhahn, rengolin, samparker, echristo, aadg, kristof.beyls
Reviewed By: fhahn
Subscribers: aemerson, javed.absar, tschuett, llvm-commits
Differential Revision: https://reviews.llvm.org/D42295
llvm-svn: 324343
Followup to D42544 that matches PACKSSWB cases for non-AVX512, SSE and PACKSSDW cases will have to wait until we can add support for general SMIN/SMAX matching.
llvm-svn: 324339
This adds most of the FP16 codegen support, but these areas need further work:
- FP16 literals and immediates are not properly supported yet (e.g. literal
pool needs work),
- Instructions that are generated from intrinsics (e.g. vabs) haven't been
added.
This will be addressed in follow-up patches.
Differential Revision: https://reviews.llvm.org/D42849
llvm-svn: 324321
We now allow all signed comparisons and not equal. The complement that needs to be added for this is no worse than the extend. And the vector output forms of pcmpeq/pcmpgt have better latency than the k-register version on SKX.
llvm-svn: 324294
In the motivating case from PR35681 and represented by the macro-fuse-cmp test:
https://bugs.llvm.org/show_bug.cgi?id=35681
...there's a 37 -> 31 byte size win for the loop because we eliminate the big base
address offsets.
SPEC2017 on Ryzen shows no significant perf difference.
Differential Revision: https://reviews.llvm.org/D42607
llvm-svn: 324289
This allows the immediate to folded into the and instead of being forced to move into a register. This can sometimes result in shorter encodings since the and can sign extend an immediate.
This also allows us to match an and to a movzx after a not.
This can cause an extra move if the input to the separate NOT has an additional user which requires a copy before the NOT.
llvm-svn: 324260
If the upper 32 bits of a 64 bit mask are all zeros, we have special isel patterns to use a 32-bit and instead of a 64-bit and by relying on the impliciting zeroing of 32 bit ops.
This patch teachs shrinkAndImmediate not to break that optimization.
Differential Revision: https://reviews.llvm.org/D42899
llvm-svn: 324249
The function shuffp2 was breaking up a wide shuffle into a pair of
narrower ones, except that the narrower shuffle masks were actually
uninitialized.
llvm-svn: 324243
PPCCTRLoops transform loops using mtctr/bdnz instructions if loop trip count is known and big enough to compensate for the cost of mtctr.
But if there is a loop exit edge which is known to be frequently taken (by builtin_expect or by PGO), we should not transform the loop to avoid the cost of mtctr instruction. Here is an example of a loop with hot exit edge:
for (unsigned i = 0; i < TripCount; i++) {
// do something
if (__builtin_expect(check(), 1))
break;
// do something
}
Differential Revision: https://reviews.llvm.org/D42637
llvm-svn: 324229
We always created X86ISD::SHUF128 with a 64-bit element type so we can use isel patterns to detect a bitconvert to 32-bit to handle masking.
The test changes are because we also match the bitconvert even if there is no masking. This leads to unnecessary isel pattern, but it requires more multiclass hackery in tablegen to get rid of it.
llvm-svn: 324205
This reduces the number of transitions between k-registers and GPRs, reducing the number of instructions.
There's still some room for improvement to remove more transitions, but this is a good start.
llvm-svn: 324184
Clang already stopped using these a couple months ago.
The test cases aren't great as there is nothing forcing the operations to stay in k-registers so some of them moved back to scalar ops due to the bitcasts being moved around.
llvm-svn: 324177
This is running pre-legalize, we should try to use target independent nodes. This will give the best opportunity for target independent optimizations.
llvm-svn: 324147
Summary:
We should always be able to accept AVX512 registers and instructions in llvm-mc. The only subtarget mode that should be checked is 16-bit vs 32-bit vs 64-bit mode.
I've also removed all the mattr/mcpu lines from test RUN lines to be consistent with this. Most were due to AVX512, but a few were for other features.
Fixes PR36202
Reviewers: RKSimon, echristo, bkramer
Reviewed By: echristo
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D42824
llvm-svn: 324106
This fixes a crash where the user is a COPY, which deliberately does not
constrain its source operands, resulting in a vreg without a reg class escaping
selection.
Differential Revision: https://reviews.llvm.org/D42697
llvm-svn: 324047
The one place that uses these functions isn't particularly
long/complicated, so it's easier to just have these inline at that
location than trying to split it out into a true header. (in part also
because of the use of the DEBUG macros, which make this not really a
standalone header even if the static functions were made inline instead)
llvm-svn: 324044
Every instruction that has the word TEST in its name seems to have been buried into EmitTest. But that code is largely concerned with trying to reuse the flags from instructions that update flags in a pretty normal way.
PTEST/TESTP/KTEST do not update flags in a normal way. They only update Z and C and the C flag update is non-standard. Rather than try to bend EmitTest's already complex logic to accomodate this, just move the call up to LowerSETCC and replicate the few pre-checks that are needed.
While there add a FIXME for using the C flag for checking for all 1s which we definitely couldn't do from EmitTEST.
llvm-svn: 324029
This is a rather non-controversial change. We were missing these instructions
from the list of instructions that are lane-sensitive. These two put the result
into lane 0 (BE) or 3 (LE) regardless of the input. This patch fixes PR36068.
llvm-svn: 324005
I added this comment with D42323, but as discussed in D42806, the architecture
does the right thing for denorms. We don't even need the select on 0.0 here?
llvm-svn: 323996
This allows us to use PSHUFB for v8i16/v4i32 and VPERMD/PERMPS for v4i64/v4f64 variable shuffles.
Differential Revision: https://reviews.llvm.org/D42487
llvm-svn: 323987
Summary: Now that v2i1/v4i1 are legal without VLX. And v32i1 is legalized by splitting rather than widening. And isVectorLoadExtDesirable returns false for vXi1. It appears this handling is dead because the operations simply don't exist.
Reviewers: RKSimon, zvi, guyblank, delena, spatel
Reviewed By: delena
Subscribers: llvm-commits, rengolin
Differential Revision: https://reviews.llvm.org/D42781
llvm-svn: 323983
Summary:
EmitTest sometimes creates X86ISD::AND specifically to hide the AND from DAG combine. But this prevents isel patterns that look for (cmp (and X, Y), 0) from being able to see it. So we end up with an AND and a TEST. The TEST gets removed by compare instruction optimization during the peephole pass.
This patch attempts to fix this by converting X86ISD::AND with no flag users back into ISD::AND during the DAG preprocessing just before isel.
In order to do this correctly I had to make the X86ISD::AND node created by EmitTest in this case really have a flag output. Which arguably it should have had anyway so that the number of operands would be consistent for the opcode in all cases. Then I had to modify the ReplaceAllUsesWith to understand that we might be looking at an instruction with 2 outputs. Though in this case there are no uses to replace since we just created the node, but that's what the code did before so I just made it keep working.
Reviewers: spatel, RKSimon, niravd, deadalnix
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D42764
llvm-svn: 323982
As shown in the example in PR34994:
https://bugs.llvm.org/show_bug.cgi?id=34994
...we can return a very wrong answer (inf instead of 0.0) for square root when
using a reciprocal square root estimate instruction.
Here, I've conditionalized the filtering out of denorms based on the function
having "denormal-fp-math"="ieee" in its attributes. The other options for this
attribute are 'preserve-sign' and 'positive-zero'.
So we don't generate this extra code by default with just '-ffast-math' (because
then there's no denormal attribute string at all), but it works if you specify
'-ffast-math -fdenormal-fp-math=ieee' from clang.
As noted in the review, there may be other problems in clang that affect the
results depending on platform (Linux x86 at least), but this should allow
creating the desired codegen.
Differential Revision: https://reviews.llvm.org/D42323
llvm-svn: 323981
Commit r323512 introduced an optimisation in LowerReturn for half-precision
return values. A missing check caused a crash when the return value is "undef"
(i.e. a node that has no operands).
Differential Revision: https://reviews.llvm.org/D42743
llvm-svn: 323968
This patch includes EVA instructions in the Std2MicroMips mapping
tables, which is required for direct object emission.
Differential Revision: https://reviews.llvm.org/D41771
llvm-svn: 323958
This fixes bugzilla 33011
https://bugs.llvm.org/show_bug.cgi?id=33011
Defines bits {19-16} as zero or unpredictable as specified by the ARM ARM in
sections A8.8.116 and A8.8.117.
It fixes also the usage of PC register as destination register for MVN
register-shifted register version as specified in A8.8.117.
Differential Revision: https://reviews.llvm.org/D41905
llvm-svn: 323954
Summary:
This change expands the amount of registers stashed by the entry and
`__xray_CustomEvent` trampolines.
We've found that since the `__xray_CustomEvent` trampoline calls can show up in
situations where the scratch registers are being used, and since we don't
typically want to affect the code-gen around the disabled
`__xray_customevent(...)` intrinsic calls, that we need to save and restore the
state of even the scratch registers in the handling of these custom events.
Reviewers: pcc, pelikan, dblaikie, eizan, kpw, echristo, chandlerc
Reviewed By: echristo
Subscribers: chandlerc, echristo, hiraditya, davide, dblaikie, llvm-commits
Differential Revision: https://reviews.llvm.org/D40894
llvm-svn: 323940
This code currently uses isSimple and getSizeInBits in an attempt to prune types. But isSimple will return true for any type that any target supports natively. I don't think that's a good way to prune types. I also don't think the dest element type checks are very robust since we didn't do an isSimple check on the dest type.
This patch adds a check for the input type being legal to the one caller that didn't already check that. Then we explicitly check the element types for the destination are i8, i16, or i32
Differential Revision: https://reviews.llvm.org/D42706
llvm-svn: 323924
Summary:
This removes the need for a machine module pass using some deeply
questionable hacks. This should address PR36123 which is a case where in
full LTO the memory usage of a machine module pass actually ended up
being significant.
We should revert this on trunk as soon as we understand and fix the
memory usage issue, but we should include this in any backports of
retpolines themselves.
Reviewers: echristo, MatzeB
Subscribers: sanjoy, mcrosier, mehdi_amini, hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D42726
llvm-svn: 323915
For now, we are not using wasm globals, except for modeling of
the stack points.
Alos, factor out common struct WasmGlobalType, which matches the
name for that tuple in the Wasm spec and rename methods
to "isBindingGlobal", "isTypeGlobal" to avoid ambiguity.
Patch by Nicholas Wilson!
Differential Revision: https://reviews.llvm.org/D42750
llvm-svn: 323901
Summary:
This was introduced in D42646 but ended up being reverted because the original implementation was buggy.
Depends on D42646
Reviewers: craig.topper, niravd, spatel, hfinkel
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D42741
llvm-svn: 323899
Summary:
It seems it's main effect is to create addition copies when values are inr register that do not support this trick, which increase register pressure and makes the code bigger.
Reviewers: craig.topper, niravd, spatel, hfinkel
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D42646
llvm-svn: 323888
Selecting of constant HVX vectors involves some "manual processing",
which mishandled an unrelated BITCAST operation causing a selection
error.
llvm-svn: 323887
Start using the new LegalizerInfo API introduced in r323681.
Keep the old API for opcodes that need Lowering in some circumstances
(G_FNEG and G_UREM/G_SREM).
llvm-svn: 323876
Summary:
Expressions of the form x < 0 ? 0 : x; and x < -1 ? -1 : x can be lowered using bit-operations instead of branching or conditional moves
In thumb-mode this results in a two-instruction sequence, a shift followed by a bic or or while in ARM/thumb2 mode that has flexible second operand the shift can be folded into a single bic/or instructions. In most cases this results in smaller code and possibly less branches, and in no case larger than before.
Patch by Marten Svanfeldt.
Reviewers: fhahn, pbarrio
Reviewed By: pbarrio
Subscribers: efriedma, rogfer01, aemerson, javed.absar, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D42574
llvm-svn: 323869
Since these methods will assert if the integer does not fit into 64 bits,
it is necessary to do this check before calling them in
supportedAddressingMode().
Review: Ulrich Weigand.
llvm-svn: 323866
Half-precision arguments and return values are passed as if it were an int or
float for ARM. This results in truncates and bitcasts to/from i16 and f16
values, which are legalized very early to stack stores/loads. When FullFP16 is
enabled, we want to avoid codegen for these bitcasts as it is unnecessary and
inefficient.
Differential Revision: https://reviews.llvm.org/D42580
llvm-svn: 323861
Enable multiple COPY hints to eliminate more COPYs during register allocation.
Note that this is something all targets should do, see
https://reviews.llvm.org/D38128.
Review: Nemanja Ivanovic
llvm-svn: 323858
In Thumb 1, with the new ADDCARRY / SUBCARRY the scheduler may need to do
copies CPSR ↔ GPR but not all Thumb1 targets implement them.
The schedule can attempt, before attempting a copy, to clone the instructions
but it does not currently do that for nodes with input glue. In this patch we
introduce a target-hook to let the hook decide if a glued machinenode is still
eligible for copying. In this case these are ARM::tADCS and ARM::tSBCS .
As a follow-up of this change we should actually implement the copies for the
Thumb1 targets that do implement them and restrict the hook to the targets that
can't really do such copy as these clones are not ideal.
This change fixes PR35836.
Differential Revision: https://reviews.llvm.org/D42051
llvm-svn: 323857
Instructions like memd(r0+##global+1) are legal as long as the entire
address is properly aligned. Assuming that "global" is aligned at an
8-byte boundary, the expression "global+1" appears to be misaligned.
Handle such cases in HexagonConstExtenders, and make sure that any non-
extended offsets generated are still aligned accordingly.
llvm-svn: 323799
This reverts r323562, since it wasn't actually necessary. Constant-
extended offsets do not need to be aligned, as long as the effective
address is aligned.
Keep the testcase, with a modification which checks that such offsets
are not unnecessarily avoided.
llvm-svn: 323798
Similar to D42437, XOP supports variable shift for v16i8/v8i16/v4i32/v2i64 types.
Differential Revision: https://reviews.llvm.org/D42526
llvm-svn: 323797
Mark more opcodes as hasExtraSrcRegAllocReq so that their operands will
be marked as not renamable, to avoid copy forwarding violating the
constraint that only one operand may use the constant bus.
These changes fix a few mis-compiles when copy forwarding is enabled in
MachineCopyPropagation by D41835 (and were reviewed as part of that change).
llvm-svn: 323794
-amdgpu-waitcnt-forcezero={1|0} Force all waitcnt instrs to be emitted as s_waitcnt vmcnt(0) expcnt(0) lgkmcnt(0)
-amdgpu-waitcnt-forceexp=<n> Force emit a s_waitcnt expcnt(0) before the first <n> instrs
-amdgpu-waitcnt-forcelgkm=<n> Force emit a s_waitcnt lgkmcnt(0) before the first <n> instrs
-amdgpu-waitcnt-forcevm=<n> Force emit a s_waitcnt vmcnt(0) before the first <n> instrs
This patch was pushed ( abb190fd51cd2f9a9eef08c024e109f7f7e909fc ), which caused a buildbot failure, reverted ( 6227480d74da507cf8e1b4bcaffbdb9fb875b4b8 ), and then updated to fix buildbot failures (this patch).
Differential Revision: https://reviews.llvm.org/D40091
llvm-svn: 323788
This feature enables the fusion of the address generation and a
corresponding load or store together.
Differential revision: https://reviews.llvm.org/D42393
llvm-svn: 323782
PR36061 showed that during the expansion of ISD::FPOWI, that there
was an incorrect zero extension of the integer argument which for
MIPS64 would then give incorrect results. Address this with the
existing mechanism for correcting sign extensions.
This resolves PR36061.
Thanks to James Cowgill for reporting the issue!
Reviewers: atanasyan, hfinkel
Differential Revision: https://reviews.llvm.org/D42537
llvm-svn: 323781
candidates with coldcc attribute.
This recommits r322721 reverted due to sanitizer memory leak build bot failures.
Original commit message:
This patch adds support for the coldcc calling convention for Power.
This changes the set of non-volatile registers. It includes a pass to stress
test the implementation by marking all static directly called functions with
the coldcc attribute through the option -enable-coldcc-stress-test. It also
includes an option, -ppc-enable-coldcc, to add the coldcc attribute to
functions which are cold at all call sites based on BlockFrequencyInfo when
the containing function does not call any non cold functions.
Differential Revision: https://reviews.llvm.org/D38413
llvm-svn: 323778
This feature enables special handling of cheap as move in the existing
custom handling specifically for Exynos processors.
Differential revision: https://reviews.llvm.org/D42387
llvm-svn: 323774
Legal if we have hardware support for floating point, libcalls
otherwise.
Also add the necessary support for libcalls in the legalizer helper.
llvm-svn: 323726
Patch by: Bas Nieuwenhuizen
Just use the _e64 variant if needed. This should be possible as per
def : Pat <
(int_amdgcn_kill (i1 (setcc f32:$src, InlineFPImm<f32>:$imm, cond:$cond))),
(SI_KILL_F32_COND_IMM_PSEUDO $src, (bitcast_fpimm_to_i32 $imm), (cond_as_i32imm $cond))
> ;
I don't think we can get an immediate for the other operand for which we
need the second 32-bit word.
https://reviews.llvm.org/D42302
llvm-svn: 323706
We currently emit up to 15-byte NOPs on all targets (apart from Silvermont), which stalls performance on some targets with decoders that struggle with 2 or 3 more '66' prefixes.
This patch flags recent AMD targets (btver1/znver1) to still emit 15-byte NOPs and bdver* targets to emit 11-byte NOPs. All other targets now emit 10-byte NOPs apart from SilverMont CPUs which still emit 7-byte NOPS.
Differential Revision: https://reviews.llvm.org/D42616
llvm-svn: 323693
Summary:
Apparently, we missed on constraining register classes of VReg-operands of all the instructions
built from a destination pattern but the root (top-level) one. The issue exposed itself
while selecting G_FPTOSI for armv7: the corresponding pattern generates VTOSIZS wrapped
into COPY_TO_REGCLASS, so top-level COPY_TO_REGCLASS gets properly constrained,
while nested VTOSIZS (or rather its destination virtual register to be exact) does not.
Fixing this by issuing GIR_ConstrainSelectedInstOperands for every nested GIR_BuildMI.
https://bugs.llvm.org/show_bug.cgi?id=35965
rdar://problem/36886530
Patch by Roman Tereshin
Reviewers: dsanders, qcolombet, rovka, bogner, aditya_nandakumar, volkan
Reviewed By: dsanders, qcolombet, rovka
Subscribers: aemerson, javed.absar, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D42565
llvm-svn: 323692
Summary:
It seems it's main effect is to create addition copies when values are inr register that do not support this trick, which increase register pressure and makes the code bigger.
The main noteworthy regression I was able to observe was pattern of the type (setcc (trunc (and X, C)), 0) where C is such as it would benefit from the hi register trick. To prevent this, a new pattern is added to materialize such pattern using a 32 bits test. This has the added benefit of working with any constant that is materializable as a 32bits immediate, not just the ones that can leverage the high register trick, as demonstrated by the test case in test-shrink.ll using the constant 2049 .
Reviewers: craig.topper, niravd, spatel, hfinkel
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D42646
llvm-svn: 323690
This reverts commit r322917 due to multiple performance regressions in spec2006
and spec2017. XFAILed llvm/test/CodeGen/AArch64/big-callframe.ll which initially
motivated this change.
llvm-svn: 323683
Summary:
As discussed in D42244, we have difficulty describing the legality of some
operations. We're not able to specify relationships between types.
For example, declaring the following
setAction({..., 0, s32}, Legal)
setAction({..., 0, s64}, Legal)
setAction({..., 1, s32}, Legal)
setAction({..., 1, s64}, Legal)
currently declares these type combinations as legal:
{s32, s32}
{s64, s32}
{s32, s64}
{s64, s64}
but we currently have no means to say that, for example, {s64, s32} is
not legal. Some operations such as G_INSERT/G_EXTRACT/G_MERGE_VALUES/
G_UNMERGE_VALUES have relationships between the types that are currently
described incorrectly.
Additionally, G_LOAD/G_STORE currently have no means to legalize non-atomics
differently to atomics. The necessary information is in the MMO but we have no
way to use this in the legalizer. Similarly, there is currently no way for the
register type and the memory type to differ so there is no way to cleanly
represent extending-load/truncating-store in a way that can't be broken by
optimizers (resulting in illegal MIR).
It's also difficult to control the legalization strategy. We've added support
for legalizing non-power of 2 types but there's still some hardcoded assumptions
about the strategy. The main one I've noticed is that type0 is always legalized
before type1 which is not a good strategy for `type0 = G_EXTRACT type1, ...` if
you need to widen the container. It will converge on the same result eventually
but it will take a much longer route when legalizing type0 than if you legalize
type1 first.
Lastly, the definition of legality and the legalization strategy is kept
separate which is not ideal. It's helpful to be able to look at a one piece of
code and see both what is legal and the method the legalizer will use to make
illegal MIR more legal.
This patch adds a layer onto the LegalizerInfo (to be removed when all targets
have been migrated) which resolves all these issues.
Here are the rules for shift and division:
for (unsigned BinOp : {G_LSHR, G_ASHR, G_SDIV, G_UDIV})
getActionDefinitions(BinOp)
.legalFor({s32, s64}) // If type0 is s32/s64 then it's Legal
.clampScalar(0, s32, s64) // If type0 is <s32 then WidenScalar to s32
// If type0 is >s64 then NarrowScalar to s64
.widenScalarToPow2(0) // Round type0 scalars up to powers of 2
.unsupported(); // Otherwise, it's unsupported
This describes everything needed to both define legality and describe how to
make illegal things legal.
Here's an example of a complex rule:
getActionDefinitions(G_INSERT)
.unsupportedIf([=](const LegalityQuery &Query) {
// If type0 is smaller than type1 then it's unsupported
return Query.Types[0].getSizeInBits() <= Query.Types[1].getSizeInBits();
})
.legalIf([=](const LegalityQuery &Query) {
// If type0 is s32/s64/p0 and type1 is a power of 2 other than 2 or 4 then it's legal
// We don't need to worry about large type1's because unsupportedIf caught that.
const LLT &Ty0 = Query.Types[0];
const LLT &Ty1 = Query.Types[1];
if (Ty0 != s32 && Ty0 != s64 && Ty0 != p0)
return false;
return isPowerOf2_32(Ty1.getSizeInBits()) &&
(Ty1.getSizeInBits() == 1 || Ty1.getSizeInBits() >= 8);
})
.clampScalar(0, s32, s64)
.widenScalarToPow2(0)
.maxScalarIf(typeInSet(0, {s32}), 1, s16) // If type0 is s32 and type1 is bigger than s16 then NarrowScalar type1 to s16
.maxScalarIf(typeInSet(0, {s64}), 1, s32) // If type0 is s64 and type1 is bigger than s32 then NarrowScalar type1 to s32
.widenScalarToPow2(1) // Round type1 scalars up to powers of 2
.unsupported();
This uses a lambda to say that G_INSERT is unsupported when type0 is bigger than
type1 (in practice, this would be a default rule for G_INSERT). It also uses one
to describe the legal cases. This particular predicate is equivalent to:
.legalFor({{s32, s1}, {s32, s8}, {s32, s16}, {s64, s1}, {s64, s8}, {s64, s16}, {s64, s32}})
In terms of performance, I saw a slight (~6%) performance improvement when
AArch64 was around 30% ported but it's pretty much break even right now.
I'm going to take a look at constexpr as a means to reduce the initialization
cost.
Future work:
* Make it possible for opcodes to share rulesets. There's no need for
G_LSHR/G_ASHR/G_SDIV/G_UDIV to have separate rule and ruleset objects. There's
no technical barrier to this, it just hasn't been done yet.
* Replace the type-index numbers with an enum to get .clampScalar(Type0, s32, s64)
* Better names for things like .maxScalarIf() (clampMaxScalar?) and the vector rules.
* Improve initialization cost using constexpr
Possible future work:
* It's possible to make these rulesets change the MIR directly instead of
returning a description of how to change the MIR. This should remove a little
overhead caused by parsing the description and routing to the right code, but
the real motivation is that it removes the need for LegalizeAction::Custom.
With Custom removed, there's no longer a requirement that Custom legalization
change the opcode to something that's considered legal.
Reviewers: ab, t.p.northover, qcolombet, rovka, aditya_nandakumar, volkan, reames, bogner
Reviewed By: bogner
Subscribers: hintonda, bogner, aemerson, mgorny, javed.absar, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D42251
llvm-svn: 323681
Summary:
Fix a few places that were modifying code after register
allocation to set the renamable bit correctly to avoid failing the
validation added in D42449.
llvm-svn: 323675
Summary:
The improvements to the LegalizerInfo discussed in D42244 require that
LegalizerInfo::LegalizeAction be available for use in other classes. As such,
it needs to be moved out of LegalizerInfo. This has been done separately to the
next patch to minimize the noise in that patch.
llvm-svn: 323669
Summary:
All variants of isLogicalImm[Not](32|64) can be combined into a single templated function, same for printLogicalImm(32|64).
By making it use a template instead, further SVE patches can use it for other data types as well (e.g. 8, 16 bits).
Reviewers: fhahn, rengolin, aadg, echristo, kristof.beyls, samparker
Reviewed By: samparker
Subscribers: aemerson, javed.absar, llvm-commits
Differential Revision: https://reviews.llvm.org/D42294
llvm-svn: 323646
Summary: This was broken long ago in D12208, which failed to account for
the fact that 64-bit SPARC uses a stack bias of 2047, and it is the
*unbiased* value which should be aligned, not the biased one. This was
seen to be an issue with Rust.
Patch by: jrtc27 (James Clarke)
Reviewers: jyknight, venkatra
Reviewed By: jyknight
Subscribers: jacob_hansen, JDevlieghere, fhahn, fedor.sergeev, llvm-commits
Differential Revision: https://reviews.llvm.org/D39425
llvm-svn: 323643
Create and use FP16Pat FullFP16Pat helper patterns to make the difference
explicit.
Differential Revision: https://reviews.llvm.org/D42634
llvm-svn: 323640
The Large System Extension added an atomic compare-and-swap instruction
that operates on a pair of 64-bit registers, which we can use to
implement a 128-bit cmpxchg.
Because i128 is not a legal type for AArch64 we have to do all of the
instruction selection in C++, and the instruction requires even/odd
register pairs, so we have to wrap it in REG_SEQUENCE and EXTRACT_SUBREG
nodes. This is very similar to what we do for 64-bit cmpxchg in the ARM
backend.
Differential revision: https://reviews.llvm.org/D42104
llvm-svn: 323634
We can use the same input for both operands to get a free compare with zero.
We already use this trick in a couple places where we explicitly create PTESTM with the same input twice. This generalizes it.
I'm hoping to remove the ISD opcodes and move this to isel patterns like we do for scalar cmp/test.
llvm-svn: 323605
Legalization is still biased to turn LT compares in to GT by swapping operands to avoid needing extra isel patterns to commute.
I'm hoping to remove TESTM/TESTNM next and this should simplify that by making EQ/NE more similar.
llvm-svn: 323604
If broadcasting from another shuffle, attempt to simplify it.
We can probably generalize this a lot more (embedding in combineX86ShufflesRecursively), but BROADCAST is one of the more troublesome as it accepts inputs of different sizes to the result.
llvm-svn: 323602
Previously we had to materialize all 1s in a register using vpternlog or pcmpeq and then xor with that. By using vpternlog directly we can do it in one operation.
This is implemented using isel patterns, but we should maybe consider creating a generalized vpternlog combiner.
llvm-svn: 323572
A correctly aligned address may happen to be separated into a variable
part and a constant part, where the constant part does not match the
alignment needed in a load/store that uses this address. Such a constant
cannot be used as an immediate offset in an indexed instruction.
When lowering a global address, make sure that if there is an offset
folded into the global, the offset is valid for all uses in load/store
instructions.
llvm-svn: 323562
X86ISelLowering.cpp:34130:5: error: return type 'llvm::SDValue' must
match previous return type 'const llvm::SDValue' when lambda expression
has unspecified explicit return type
llvm-svn: 323557
Previously some targets printed their own message at the start of Select to indicate what they were selecting. For the targets that didn't, it means there was no print of the root node before any custom handling in the target executed. So if the target did something custom and never called SelectNodeCommon, no print would be made. For the targets that did print a message in Select, if they didn't custom handle a node SelectNodeCommon would reprint the root node before walking the isel table.
It seems better to just print the message before the call to Select so all targets behave the same. And then remove the root node printing from SelectNodeCommon and just leave a message that says we're starting the table search.
There were also some oddities in blank line behavior. Usually due to a \n after a call to SelectionDAGNode::dump which already inserted a new line.
llvm-svn: 323551
We currently coalesce v4i32 extracts from all 4 elements to 2 v2i64 extracts + shifts/sign-extends.
This seems to have been added back in the days when we tended to spill vectors and reload scalars, or ended up with repeated shuffles moving everything down to 0'th index. I don't think either of these are likely these days as we have better EXTRACT_VECTOR_ELT and VECTOR_SHUFFLE handling, and the existing code tends to make it very difficult for various vector and load combines.
Differential Revision: https://reviews.llvm.org/D42308
llvm-svn: 323541
- using qualified pointer addrspace in intrinsics class to avoid .f32 mangling
- changed too common atomic mangling to ds
- added missing intrinsics to AMDGPUTTIImpl::getTgtMemIntrinsic
Reviewed by: b-sumner
Differential Revision: https://reviews.llvm.org/D42383
llvm-svn: 323516
load instruction
The function `Thumb1InstrInfo::loadRegFromStackSlot` accepts only the `tGPR`
register class. The function serves to emit a `tLDRspi` instruction and
certainly any subset of the `tGPR` register class is a valid destination of the
load.
Differential revision: https://reviews.llvm.org/D42535
llvm-svn: 323514
This is the groundwork for Armv8.2-A FP16 code generation .
Clang passes and returns _Float16 values as floats, together with the required
bitconverts and truncs etc. to implement correct AAPCS behaviour, see D42318.
We will implement half-precision argument passing/returning lowering in the ARM
backend soon, but for now this means that this:
_Float16 sub(_Float16 a, _Float16 b) {
return a + b;
}
gets lowered to this:
define float @sub(float %a.coerce, float %b.coerce) {
entry:
%0 = bitcast float %a.coerce to i32
%tmp.0.extract.trunc = trunc i32 %0 to i16
%1 = bitcast i16 %tmp.0.extract.trunc to half
<SNIP>
%add = fadd half %1, %3
<SNIP>
}
When FullFP16 is *not* supported, we don't make f16 a legal type, and we get
legalization for "free", i.e. nothing changes and everything works as before.
And also f16 argument passing/returning is handled.
When FullFP16 is supported, we do make f16 a legal type, and have 2 places that
we need to patch up: f16 argument passing and returning, which involves minor
tweaks to avoid unnecessary code generation for some bitcasts.
As a "demonstrator" that this works for the different FP16, FullFP16, softfp
modes, etc., I've added match rules to the VSUB instruction description showing
that we can codegen this instruction from IR, but more importantly, also to
some conversion instructions. These conversions were causing issue before in
the FP16 and FullFP16 cases.
I've also added match rules to the VLDRH and VSTRH desriptions, so that we can
actually compile the entire half-precision sub code example above. This showed
that these loads and stores had the wrong addressing mode specified: AddrMode5
instead of AddrMode5FP16, which turned out not be implemented at all, so that
has also been added.
This is the minimal patch that shows all the different moving parts. In patch
2/3 I will add some efficient lowering of bitcasts, and in 2/3 I will add the
remaining Armv8.2-A FP16 instruction descriptions.
Thanks to Sam Parker and Oliver Stannard for their help and reviews!
Differential Revision: https://reviews.llvm.org/D38315
llvm-svn: 323512
Type legalization would prevent any i64 operands to the build_vector from existing before we get here. The coverage bots show this code as uncovered.
llvm-svn: 323506
The original autoupgrade for kunpck intrinsics used a bitcasted scalar shift, or, and. This combine would turn this into a concat_vectors. Now the kunpck intrinsics are autoupgraded to a vector shuffle that will become a concat_vectors.
llvm-svn: 323504
This listed all legal 128-bit integer types individually, but since we already know we have a legal type and its integer, we can just check is128BitVector.
llvm-svn: 323502
When pass creates a MOV instruction for
lea (%base,%index,1), %dst => mov %base,%dst; add %index,%dst
modification it should clean the killed flag for base
if base is equal to index.
Otherwise verifier complains about usage of killed register in add instruction.
Reviewers: lsaba, zvi, zansari, aaboud
Reviewed By: lsaba
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D42522
llvm-svn: 323497
This patch enables aggressive FMA by default on T99, and provides a -mllvm
option to enable the same on other AArch64 micro-arch's (-mllvm
-aarch64-enable-aggressive-fma).
Test case demonstrating the effects on T99 is included.
Patch by: steleman (Stefan Teleman)
Differential Revision: https://reviews.llvm.org/D40696
llvm-svn: 323474
The asm parser puts the lock prefix in the MCInst flags so we need to check that in addition to TSFlags. This matches what the ATT printer does.
llvm-svn: 323469
The regular expressions and the imul names caused some instructions to be matched by multiple regexs creating unpredictable results.
This changes them all to use explicit instrs instead.
While doing this I also found that some instructions in Skylake were missing load latency so I fixed that too.
llvm-svn: 323406
The IMUL instruction names mixed with the prefix matching of the instregex lead to some strange matches. The worst being that several memory instructions are using the register form latency.
I don't know what the right answer is, so I've left TODOs and will try to work with the AMD folks to get this cleaned up.
llvm-svn: 323405
MMX instrutions all start with MMX_ so the 64 isn't needed for disambigutation.
SSE/AVX1 instructions are assumed 128-bit so we don't need to say 128.
AVX2 instructions should use a Y to indicate 256-bits.
llvm-svn: 323402
These were treated as optional suffixes, but the regular expressions are already prefix matches so this is unnecessary. It breaks the binary search optimization in tablegen due to the top level question mark.
llvm-svn: 323401
The code in EmitFunctionEntryCode needs to know the maximum stack
alignment, but it runs very early in the selection process (before
lowering). The final stack alignment may change during lowering, so
the code needs to be moved to where the alignment is known.
llvm-svn: 323374
The tablegen imported patterns for sext(load(a)) don't check for single uses
of the load or delete the original after matching. As a result two loads are
left in the generated code. This particular issue will be fixed by adding
support for a G_SEXTLOAD opcode in future.
There are however other potential issues around this that wouldn't be fixed by
a G_SEXTLOAD, so until we have a proper solution we don't try to handle volatile
loads at all in the AArch64 selector.
Fixes/works around PR36018.
llvm-svn: 323371
As discussed in D41484, PMADDWD for 'zero extended' vXi32 is nearly always a better option than PMULLD:
On SNB it will result in code that isn't any faster, but not any slower so we may as well keep it.
On KNL it only has half the throughput, so I've disabled it on there - ideally there'd be a better way than this.
Differential Revision: https://reviews.llvm.org/D42258
llvm-svn: 323367
Summary:
Move reserveRegisterTuples into AMDGPURegisterInfo and use it in
R600RegisterInfo::getReservedRegs and
R600InstrInfo::reserveIndirectRegisters to ensure that all super
registers of reserved registers are also marked as reserved.
Before this change, under certain circumstances, the registers %t1_x and
%t1_xyzw would be marked as reserved, but %t1_xy and %t1_xyz would not
be, leading to the register allocator sometimes assigning a register to
%t1_xy, which is invalid since %t1_x is reserved.
Reviewers: arsenm, tstellar, MatzeB, qcolombet
Subscribers: kzhuravl, wdng, nhaehnle, yaxunl, dstuttard, tpr, t-tye, mcrosier, llvm-commits
Differential Revision: https://reviews.llvm.org/D42448
llvm-svn: 323356
Summary: For long shifts, the inlined version takes about 20 instructions on Thumb1. To avoid the code bloat, expand to __aeabi_ calls if target is Thumb1.
Reviewers: samparker
Reviewed By: samparker
Subscribers: samparker, aemerson, javed.absar, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D42401
llvm-svn: 323354
The regexs are treated as a prefix match already so the checking for optional text at the end provides no value. Instead it prevents the binary search optimization in tablegen from kicking in due to the top level question mark.
llvm-svn: 323351
Summary:
Loads/stores of some NEON vector types are promoted to other vector
types with different lane sizes but same vector size. This is not a
problem in little-endian but, when in big-endian, it requires
additional byte reversals required to preserve the lane ordering
while keeping the right endianness of the data inside each lane.
For example:
%1 = load <4 x half>, <4 x half>* %p
results in the following assembly:
ld1 { v0.2s }, [x1]
rev32 v0.4h, v0.4h
This patch changes the promotion of these loads/stores so that the
actual vector load/store (LD1/ST1) takes care of the endianness
correctly and there is no need for further byte reversals. The
previous code now results in the following assembly:
ld1 { v0.4h }, [x1]
Reviewers: olista01, SjoerdMeijer, efriedma
Reviewed By: efriedma
Subscribers: aemerson, rengolin, javed.absar, llvm-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D42235
llvm-svn: 323325
This matches what MSVC does for alloca() function calls on ARM.
Even if MSVC doesn't support VLAs at the language level, it does
support the alloca function.
On the clang level, both the _alloca() (when emulating MSVC, which is
what the alloca() function expands to) and __builtin_alloca() builtin
functions, and VLAs, map to the same LLVM IR "alloca" function - so
within LLVM they're not distinguishable from each other.
Differential Revision: https://reviews.llvm.org/D42292
llvm-svn: 323308
I think these instructions used to be named differently and the regular expression reflected that. I guess we must have correct itinerary information that made this not matter for the scheduler test?
llvm-svn: 323305
There are a couple tricky things with this patch.
I had to add an override of isVectorLoadExtDesirable to stop DAG combine from combining sign_extend with loads after legalization since we legalize sextload using a load+sign_extend. Overriding this hook actually prevents a lot sextloads from being created in the first place.
I also had to add isel patterns because DAG combine blindly combines sign_extend+truncate to a smaller sign_extend which defeats what legalization was trying to do.
Differential Revision: https://reviews.llvm.org/D42407
llvm-svn: 323301
This is already a simplification, and should help with avoiding a plt
reference when calling an intrinsic with -fno-plt.
With this change we return false for null GVs, so the caller only
needs to check the new metadata to decide if it should use foo@plt or
*foo@got.
llvm-svn: 323297
Remove FeatureSlowMisaligned128Store from cyclone flags.
This flag causes splitting of 16 byte wide stores into 2 stored of 8
bytes. This was useful on older apple CPUs which were slow for 16byte
stores that were not aligned on 16byte. As the compiler often cannot
predict the actual alignment, the splitting was choosen.
This has been a topic for a lot of debate as the splitting also
decreases performance for some benchmarks. Measuring the effects on
newer apple chips (rdar://35525421) shows that it harms more cases than
it helps. So it is time to retire this workaround.
llvm-svn: 323289
Summary:
Fix an issue that's similar to what D41411 fixed:
float(__int128(float_var)) shouldn't be optimized to xscvdpsxds +
xscvsxdsp, as they mean (float)(int64_t)float_var.
Reviewers: jtony, hfinkel, echristo
Subscribers: sanjoy, nemanjai, hiraditya, llvm-commits, kbarton
Differential Revision: https://reviews.llvm.org/D42400
llvm-svn: 323270
I don't know if the unused classes were intended to be used and that the VEX version is really different than the legacy SSE version. Agner's tables don't show any differences. I'm just cleaning up assuming the current behavior is correct.
llvm-svn: 323263
All other intrinsic instructions put the _Int on the end. This make these instructions consistent and gets the prefix instregexs in the scheduler models to pick them up.
llvm-svn: 323261
Minor refactor to make it possible for LowerBUILD_VECTORAsVariablePermute to be used with a wider variety of shuffles op and types.
I'd have liked to add v4i32/v4f32 support as well but we don't see v4i32 index extractions at the moment (which is why I created D42308)
After this I intend to begin adding scaling support for PSHUFB (v8i16, v4i32, v2i64)) and VPERMPS (v4f64, v4i64).
Differential Revision: https://reviews.llvm.org/D42431
llvm-svn: 323260
In addition to that, make sure that there are no boolean vector types that
are associated with multiple register classes. Specifically, remove v32i1
and v64i1 from integer register classes. These types will correspond to
results of vector comparisons, and as such should belong to the vector
predicate class. Having them in scalar registers as well makes legalization
ambiguous.
llvm-svn: 323229
The grow_memory and current_memory instructions are expected to be
officially renamed to mem.grow and mem.size. Introduce new intrinsics
with the new names. These new names aren't yet official, so for now,
use them at your own risk.
Also, take this opportunity to add arguments for the currently unused
immediate field in those instructions.
llvm-svn: 323222
The existing code was already doing something very similar to subvector insertion so this allows us to remove the nearly duplicate code.
This patch is a little larger than it should be due to differences between the DQI handling between the two today.
llvm-svn: 323212
Some nodes produce multiple values so when obtaining the type of an ISD::OR we
need to make sure we ask for the correct one. Hopefully that's all of them.
llvm-svn: 323205
Summary:
For the most part its better to keep v32i1 as a mask type of a narrower width than trying to promote it to a ymm register.
I had to add some overrides to the methods that get the types for the calling convention so that we still use v32i8 for argument/return purposes.
There are still some regressions in here. I definitely saw some around shuffles. I think we probably should move vXi1 shuffle from lowering to a DAG combine where I think the extend and truncate we have to emit would be better combined.
I think we also need a DAG combine to remove trunc from (extract_vector_elt (trunc))
Overall this removes something like 13000 CHECK lines from lit tests.
Reviewers: zvi, RKSimon, delena, spatel
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D42031
llvm-svn: 323201
I'm not sure there's any way to generate these folding cases especially the movzx ones since even the register form is never emitted by codegen.
I'm just adding them to remove the difference with the autogenerated version of the folding table.
llvm-svn: 323200
As detailed in rL317463, PSHUFB (like most variable shuffle instructions) uses Op[0] for the source vector and Op[1] for the shuffle index vector, VPERMV works in reverse which is probably where the confusion comes from.
Differential Revision: https://reviews.llvm.org/D42380
llvm-svn: 323190
- Alter abs for micromips to have both AFGR64 and FGR64
variants, same as sqrt
- Remove sqrt and abs from MicroMips32r6InstrInfo.td,
use micromips FGR64 variants
- Restrict non-micromips abs/sqrt with NotInMicroMips
predicate
Differential revision: https://reviews.llvm.org/D41439
llvm-svn: 323184
Summary:
If we can match as a zero extend there's no need to flip the order to get an encoding benefit. As movzx is 3 bytes with independent source/dest registers. The shortest 'and' we could make is also 3 bytes unless we get lucky in the register allocator and its on AL/AX/EAX which have a 2 byte encoding.
This patch was more impressive before r322957 went in. It removed some of the same Ands that got deleted by that patch.
Reviewers: spatel, RKSimon
Reviewed By: spatel
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D42313
llvm-svn: 323175
Some of the NOREX instructions are used in 32-bit mode making this printing confusing. It also doesn't provide a lot of value since you can see the h-register being used by the instruction.
llvm-svn: 323174
Add missing patterns for inserting v1i1 into a zero vector. Use insert_subvector to zero upper bits before inserting an element into a vXi1 vector. Replace kshift based isel pattern with insert_subvector based pattern now that code that caused the pattern has been fixed to emit insert_subvector.
llvm-svn: 323173
Summary:
First, we need to explain the core of the vulnerability. Note that this
is a very incomplete description, please see the Project Zero blog post
for details:
https://googleprojectzero.blogspot.com/2018/01/reading-privileged-memory-with-side.html
The basis for branch target injection is to direct speculative execution
of the processor to some "gadget" of executable code by poisoning the
prediction of indirect branches with the address of that gadget. The
gadget in turn contains an operation that provides a side channel for
reading data. Most commonly, this will look like a load of secret data
followed by a branch on the loaded value and then a load of some
predictable cache line. The attacker then uses timing of the processors
cache to determine which direction the branch took *in the speculative
execution*, and in turn what one bit of the loaded value was. Due to the
nature of these timing side channels and the branch predictor on Intel
processors, this allows an attacker to leak data only accessible to
a privileged domain (like the kernel) back into an unprivileged domain.
The goal is simple: avoid generating code which contains an indirect
branch that could have its prediction poisoned by an attacker. In many
cases, the compiler can simply use directed conditional branches and
a small search tree. LLVM already has support for lowering switches in
this way and the first step of this patch is to disable jump-table
lowering of switches and introduce a pass to rewrite explicit indirectbr
sequences into a switch over integers.
However, there is no fully general alternative to indirect calls. We
introduce a new construct we call a "retpoline" to implement indirect
calls in a non-speculatable way. It can be thought of loosely as
a trampoline for indirect calls which uses the RET instruction on x86.
Further, we arrange for a specific call->ret sequence which ensures the
processor predicts the return to go to a controlled, known location. The
retpoline then "smashes" the return address pushed onto the stack by the
call with the desired target of the original indirect call. The result
is a predicted return to the next instruction after a call (which can be
used to trap speculative execution within an infinite loop) and an
actual indirect branch to an arbitrary address.
On 64-bit x86 ABIs, this is especially easily done in the compiler by
using a guaranteed scratch register to pass the target into this device.
For 32-bit ABIs there isn't a guaranteed scratch register and so several
different retpoline variants are introduced to use a scratch register if
one is available in the calling convention and to otherwise use direct
stack push/pop sequences to pass the target address.
This "retpoline" mitigation is fully described in the following blog
post: https://support.google.com/faqs/answer/7625886
We also support a target feature that disables emission of the retpoline
thunk by the compiler to allow for custom thunks if users want them.
These are particularly useful in environments like kernels that
routinely do hot-patching on boot and want to hot-patch their thunk to
different code sequences. They can write this custom thunk and use
`-mretpoline-external-thunk` *in addition* to `-mretpoline`. In this
case, on x86-64 thu thunk names must be:
```
__llvm_external_retpoline_r11
```
or on 32-bit:
```
__llvm_external_retpoline_eax
__llvm_external_retpoline_ecx
__llvm_external_retpoline_edx
__llvm_external_retpoline_push
```
And the target of the retpoline is passed in the named register, or in
the case of the `push` suffix on the top of the stack via a `pushl`
instruction.
There is one other important source of indirect branches in x86 ELF
binaries: the PLT. These patches also include support for LLD to
generate PLT entries that perform a retpoline-style indirection.
The only other indirect branches remaining that we are aware of are from
precompiled runtimes (such as crt0.o and similar). The ones we have
found are not really attackable, and so we have not focused on them
here, but eventually these runtimes should also be replicated for
retpoline-ed configurations for completeness.
For kernels or other freestanding or fully static executables, the
compiler switch `-mretpoline` is sufficient to fully mitigate this
particular attack. For dynamic executables, you must compile *all*
libraries with `-mretpoline` and additionally link the dynamic
executable and all shared libraries with LLD and pass `-z retpolineplt`
(or use similar functionality from some other linker). We strongly
recommend also using `-z now` as non-lazy binding allows the
retpoline-mitigated PLT to be substantially smaller.
When manually apply similar transformations to `-mretpoline` to the
Linux kernel we observed very small performance hits to applications
running typical workloads, and relatively minor hits (approximately 2%)
even for extremely syscall-heavy applications. This is largely due to
the small number of indirect branches that occur in performance
sensitive paths of the kernel.
When using these patches on statically linked applications, especially
C++ applications, you should expect to see a much more dramatic
performance hit. For microbenchmarks that are switch, indirect-, or
virtual-call heavy we have seen overheads ranging from 10% to 50%.
However, real-world workloads exhibit substantially lower performance
impact. Notably, techniques such as PGO and ThinLTO dramatically reduce
the impact of hot indirect calls (by speculatively promoting them to
direct calls) and allow optimized search trees to be used to lower
switches. If you need to deploy these techniques in C++ applications, we
*strongly* recommend that you ensure all hot call targets are statically
linked (avoiding PLT indirection) and use both PGO and ThinLTO. Well
tuned servers using all of these techniques saw 5% - 10% overhead from
the use of retpoline.
We will add detailed documentation covering these components in
subsequent patches, but wanted to make the core functionality available
as soon as possible. Happy for more code review, but we'd really like to
get these patches landed and backported ASAP for obvious reasons. We're
planning to backport this to both 6.0 and 5.0 release streams and get
a 5.0 release with just this cherry picked ASAP for distros and vendors.
This patch is the work of a number of people over the past month: Eric, Reid,
Rui, and myself. I'm mailing it out as a single commit due to the time
sensitive nature of landing this and the need to backport it. Huge thanks to
everyone who helped out here, and everyone at Intel who helped out in
discussions about how to craft this. Also, credit goes to Paul Turner (at
Google, but not an LLVM contributor) for much of the underlying retpoline
design.
Reviewers: echristo, rnk, ruiu, craig.topper, DavidKreitzer
Subscribers: sanjoy, emaste, mcrosier, mgorny, mehdi_amini, hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D41723
llvm-svn: 323155
- Change inserted add ( V_ADD_{I|U}32_e32 ) to _e64 version ( V_ADD_{I|U}32_e64 ) so that the add uses a vreg for the carry; this prevents inserted v_add from killing VCC; the _e64 version doesn't accept a literal in its encoding, so we need to introduce a mov instr as well to get the imm into a register.
- Change pass name to "SI Load Store Optimizer"; this removes the '/', which complicates scripts.
Differential Revision: https://reviews.llvm.org/D42124
llvm-svn: 323153
As noted in another review, this loop is confusing. This commit cleans it up
somewhat.
Differential Revision: https://reviews.llvm.org/D42312
llvm-svn: 323136
Dsp and dspr2 require MIPS revision 2, while msa requires revision 5. Adding
warnings for cases when these flags are used with earlier revision.
Patch by Milos Stojanovic.
Differential Revision: https://reviews.llvm.org/D40490
llvm-svn: 323131
The change in r322988 caused a failure in the bootstrap build bot.
The problem was that directly gluing a BR_CCMASK node to a
compare-and-swap could lead to issues if other nodes were
chained in between. There is then no way to create a topological
sort that respects both the chain sequence and the glue property.
Fixed for now by rejecting the optimization in this case. As a
future enhancement, we may be able to handle additional cases
by swapping chain links around.
llvm-svn: 323129
Improves the code generation for v4f16 FCMP instructions when FullFP16 is not supported.
Generating FCTVL(s) rather than a longer series of FCVTs.
Differential Revision: https://reviews.llvm.org/D41772
llvm-svn: 323118
Primarily, this allows us to use the aggressive extraction mechanisms in combineExtractWithShuffle earlier and make use of UNDEF elements that may be lost during lowering.
Reapplied after rL322279 was reverted at rL322335 due to PR35918, underlying issue was fixed at rL322644.
llvm-svn: 323104
Summary:
This patch adds support for parsing/printing of named or unnamed
patterns that are used in SVE's PTRUE instruction, amongst others.
The pattern can be specified as a named pattern to initialize the predicate
vector or it can be specified as an immediate in the range 0-31.
Reviewers: fhahn, rengolin, evandro, mcrosier, t.p.northover
Reviewed By: fhahn
Subscribers: aemerson, javed.absar, tschuett, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D41818
llvm-svn: 323098
1. ReachingDefsAnalysis - Allows to identify for each instruction what is the “closest” reaching def of a certain register. Used by BreakFalseDeps (for clearance calculation) and ExecutionDomainFix (for arbitrating conflicting domains).
2. ExecutionDomainFix - Changes the variant of the instructions in order to minimize domain crossings.
3. BreakFalseDeps - Breaks false dependencies.
4. LoopTraversal - Creatws a traversal order of the basic blocks that is optimal for loops (introduced in revision L293571). Both ExecutionDomainFix and ReachingDefsAnalysis use this to determine the order they will traverse the basic blocks.
This also included the following changes to ExcecutionDepsFix original logic:
1. BreakFalseDeps and ReachingDefsAnalysis logic no longer restricted by a register class.
2. ReachingDefsAnalysis tracks liveness of reg units instead of reg indices into a given reg class.
Additional changes in affected files:
1. X86 and ARM targets now inherit from ExecutionDomainFix instead of ExecutionDepsFix. BreakFalseDeps also was added to the passes they activate.
2. Comments and references to ExecutionDepsFix replaced with ExecutionDomainFix and BreakFalseDeps, as appropriate.
Additional refactoring changes will follow.
This commit is (almost) NFC.
The only functional change is that now BreakFalseDeps will break dependency for all register classes.
Since no additional instructions were added to the list of instructions that have false dependencies, there is no actual change yet.
In a future commit several instructions (and tests) will be added.
This is the first of multiple patches that fix bugzilla https://bugs.llvm.org/show_bug.cgi?id=33869
Most of the patches are intended at refactoring the existent code.
Additional relevant reviews:
https://reviews.llvm.org/D40331https://reviews.llvm.org/D40332https://reviews.llvm.org/D40333https://reviews.llvm.org/D40334
Differential Revision: https://reviews.llvm.org/D40330
Change-Id: Icaeb75e014eff96a8f721377783f9a3e6c679275
llvm-svn: 323087
Summary:
This patch adds an implementation of targetShrinkDemandedConstant that tries to keep shrinkdemandedbits from removing bits that would otherwise have been recognized as a movzx.
We still need a follow patch to stop moving ands across srl if the and could be represented as a movzx before the shift but not after. I think this should help with some of the cases that D42088 ended up removing during isel.
Reviewers: spatel, RKSimon
Reviewed By: spatel
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D42265
llvm-svn: 323048
This change applies to places where we would turn 128/256-bit code into 512-bit in order to get a wider element type through sext/zext. Any 512-bit types that already existed in the IR/DAG will be left that way.
The width preference has no effect on codegen behavior when the target does not have AVX512 enabled. So AVX/AVX2 codegen cannot be limited via this mechanism yet.
If the preference is lower than 256 we may still use a 256 bit type to do the operation. Constraining to 128 bits makes it much more difficult to support some operations. For many of these cases we need to change element width while keeping element count constant which is easiest done by switching between 256 and 128 bit.
The preference is only obeyed when AVX512 and VLX are available. This means the preference is not obeyed for KNL, but is obeyed for SKX, Cannonlake, and Icelake. For KNL, the only way to do masked operation is on 512-bit registers so we would have to completely disable masking to obey the preference. We would also lose support for gather, scatter, ctlz, vXi64 multiplies, etc. This may change in the future, but this simplifies the initial implementation.
Differential Revision: https://reviews.llvm.org/D41895
llvm-svn: 323016
This will cause the vectorizers to do some limiting of the vector widths they create. This is not a strict limit. There are reasons I know of that the loop vectorizer will generate larger vectors for.
I've written this in such a way that the interface will only return a properly supported width(0/128/256/512) even if the attribute says something funny like 384 or 10.
This has been split from D41895 with the remainder in a follow up commit.
llvm-svn: 323015
On current machines we have load-on-condition instructions that can be
used to directly implement the SETCC semantics. If we have those, it is
always preferable to use them instead of generating the IPM sequence.
llvm-svn: 322989
In order to implement a test whether a compare-and-swap succeeded, the
SystemZ back-end currently emits a rather inefficient sequence of first
converting the CC result into an integer, and then testing that integer
against zero. This commit changes the back-end to simply directly test
the CC value set by the compare-and-swap instruction.
llvm-svn: 322988
The SystemZ back-end uses a sequence of IPM followed by arithmetic
operations to implement the SETCC primitive. This is currently done
early during SelectionDAG. This patch moves generating those sequences
to much later in SelectionDAG (during PreprocessISelDAG).
This doesn't change much in generated code by itself, but it allows
further enhancements that will be checked-in as follow-on commits.
llvm-svn: 322987
Fix a performance regression caused by r322737.
While trying to make it easier to replace compares with existing adds and
subtracts, I accidentally stopped it from doing so in some cases. This should
fix that. I'm also fixing another potential bug in that commit.
Differential Revision: https://reviews.llvm.org/D42263
llvm-svn: 322972
RuntimeLibcallSignatures previously manually initialized all the libcall
names into an array and searched it linearly for the first match to lookup
the corresponding index.
r322802 switched that to initializing a map keyed by the libcall name.
Neither of these approaches works correctly because some libcall numbers use
the same name on different platforms (e.g. the "l" suffixed functions
use f80 or f128 or ppcf128).
This change fixes that by ensuring that each name only goes into the map
once. It also adds tests.
Differential Revision: https://reviews.llvm.org/D42271
llvm-svn: 322971
Sign-extension opcodes have been split into a separate proposal from
the main threads proposal, so switch them to their own target
feature. See:
https://github.com/WebAssembly/sign-extension-ops
llvm-svn: 322966
Try to reverse the constant-shrinking that happens in SimplifyDemandedBits()
for 'and' masks when it results in a smaller sign-extended immediate.
We are also able to detect dead 'and' ops here (the mask is all ones). In
that case, we replace and return without selecting the 'and'.
Other targets might want to share some of this logic by enabling this under a
target hook, but I didn't see diffs for simple cases with PowerPC or AArch64,
so they may already have some specialized logic for this kind of thing or have
different needs.
This should solve PR35907:
https://bugs.llvm.org/show_bug.cgi?id=35907
Differential Revision: https://reviews.llvm.org/D42088
llvm-svn: 322957
This avoids playing games with pseudo pass IDs and avoids using an
unreliable MRI::isSSA() check to determine whether register allocation
has happened.
Note that this renames:
- MachineLICMID -> EarlyMachineLICM
- PostRAMachineLICMID -> MachineLICMID
to be consistent with the EarlyTailDuplicate/TailDuplicate naming.
llvm-svn: 322927
Re-commit of r322200: The testcase shouldn't hit machineverifiers
anymore with r322917 in place.
Large callframes (calls with several hundreds or thousands or
parameters) could lead to situations in which the emergency spillslot is
out of range to be addressed relative to the stack pointer.
This commit forces the use of a frame pointer in the presence of large
callframes.
This commit does several things:
- Compute max callframe size at the end of instruction selection.
- Add mirFileLoaded target callback. Use it to compute the max callframe size
after loading a .mir file when the size wasn't specified in the file.
- Let TargetFrameLowering::hasFP() return true if there exists a
callframe > 255 bytes.
- Always place the emergency spillslot close to FP if we have a frame
pointer.
- Note that `useFPForScavengingIndex()` would previously return false
when a base pointer was available leading to the emergency spillslot
getting allocated late (that's the whole effect of this callback).
Which made no sense to me so I took this case out: Even though the
emergency spillslot is technically not referenced by FP in this case
we still want it allocated early.
Differential Revision: https://reviews.llvm.org/D40876
llvm-svn: 322919
Do not create CALLSEQ_START/CALLSEQ_END when there is no callframe to
setup and the callframe size is 0.
- Fixes an invalid callframe nesting for byval arguments, which would
look like this before this patch (as in `big-byval.ll`):
...
ADJCALLSTACKDOWN 32768, 0, ... # Setup for extfunc
...
ADJCALLSTACKDOWN 0, 0, ... # setup for memcpy
...
BL &memcpy ...
ADJCALLSTACKUP 0, 0, ... # destroy for memcpy
...
BL &extfunc
ADJCALLSTACKUP 32768, 0, ... # destroy for extfunc
- Saves us two instructions in the common case of zero-sized stackframes.
- Remove an unnecessary scheduling barrier (hence the small unittest
changes).
Differential Revision: https://reviews.llvm.org/D42006
llvm-svn: 322917
This adds a new instrinsic to support the rdpid instruction. The implementation is a bit weird because the intrinsic is defined as always returning 32-bits, but the assembler support thinks the instruction produces a 64-bit register in 64-bit mode. But really it zeros the upper 32 bits. So I had to add separate patterns where 64-bit mode uses an extract_subreg.
Differential Revision: https://reviews.llvm.org/D42205
llvm-svn: 322910
Summary:
This patch implements d16 support for image load, image store and image sample intrinsics.
Reviewers:
Matt, Brian.
Differential Revision:
https://reviews.llvm.org/D3991
llvm-svn: 322903
Remove the tight coupling between llvm/CodeGenRuntimeLibcalls.def and
the table of supported singatures for wasm. This will allow adding new libcalls
without changing wasm's signature table.
Also, some cleanup:
Use ManagedStatics instead of const tables to avoid memory/binary bloat.
Use a StringMap instead of a linear search for name lookup.
Differential Revision: https://reviews.llvm.org/D35592
llvm-svn: 322802
Every known PE COFF target emits /EXPORT: linker flags into a .drective
section. The AsmPrinter should handle this.
While we're at it, use global_values() and emit each export flag with
its own .ascii directive. This should make the .s file output more
readable.
llvm-svn: 322788
Summary:
This patch adds a new target option in order to control GlobalISel.
This will allow the users to enable/disable GlobalISel prior to the
backend by calling `TargetMachine::setGlobalISel(bool Enable)`.
No test case as there is already a test to check GlobalISel
command line options.
See: CodeGen/AArch64/GlobalISel/gisel-commandline-option.ll.
Reviewers: qcolombet, aemerson, ab, dsanders
Reviewed By: qcolombet
Subscribers: rovka, javed.absar, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D42137
llvm-svn: 322773
Trying to link
__attribute__((weak, visibility("hidden"))) extern int foo;
int *main(void) {
return &foo;
}
on OS X fails with
ld: 32-bit RIP relative reference out of range (-4294971318 max is +/-2GB): from _main (0x100000FAB) to _foo@0x00001000 (0x00000000) in '_main' from test.o for architecture x86_64
The problem being that 0 cannot be computed as a fixed difference from
%rip. Exactly the same issue exists on ELF and we can use the same
solution.
llvm-svn: 322739
This extends my previous patches to also optimize overflow-checked multiplies during SelectionDAG.
Differential revision: https://reviews.llvm.org/D40922
llvm-svn: 322738
The ARM backend contains code that tries to optimize compares by replacing them with an existing instruction that sets the flags the same way. This allows it to replace a "cmp" with a "adds", generalizing the code that replaces "cmp" with "sub". It also heuristically disables sinking of instructions that could potentially be used to replace compares (currently only if they're next to each other).
Differential revision: https://reviews.llvm.org/D38378
llvm-svn: 322737
Most are just replaced with instrs lists, but a few regexps have been further generalized to match more instructions with a single pattern.
llvm-svn: 322734
If we are splatting pairs of 32-bit elements, we can use a 64-bit broadcast to get the job done.
We could probably could probably do this with other sizes too, for example four 16-bit elements. Or we could broadcast pairs of 16-bit elements using a 32-bit element broadcast. But I've left that as a future improvement.
I've also restricted this to AVX2 only because we can only broadcast loads under AVX.
Differential Revision: https://reviews.llvm.org/D42086
llvm-svn: 322730
We legalize selects of masks with scalar conditions using a bitcast to an integer type. But if we are in 32-bit mode we can't convert v64i1 to i64. So instead split the v64i1 to v32i1 and concat it back together. Each half will then be legalized by bitcasting to i32 which is fine.
The test case is a little indirect. If we have the v64i1 select in IR it will get legalized by legalize vector ops which has a run of type legalization after it. That type legalization run is able to fix this i64 bitcast. So in order to avoid that we need a build_vector of a splat which legalize vector ops will ignore. Legalize DAG will then turn that into a select via LowerBUILD_VECTORvXi1. And the select will get legalized. In this case there is no type legalizer run to cleanup the bitcast.
This fixes pr35972.
llvm-svn: 322724
candidates with coldcc attribute.
This patch adds support for the coldcc calling convention for Power.
This changes the set of non-volatile registers. It includes a pass to stress
test the implementation by marking all static directly called functions with
the coldcc attribute through the option -enable-coldcc-stress-test. It also
includes an option, -ppc-enable-coldcc, to add the coldcc attribute to
functions which are cold at all call sites based on BlockFrequencyInfo when
the containing function does not call any non cold functions.
Differential Revision: https://reviews.llvm.org/D38413
llvm-svn: 322721
BRCTH is capable of a long branch which needs to be recognized during branch
relaxation. This is done by checking for ExtraRelaxSize == 0.
Review: Ulrich Weigand
llvm-svn: 322688
This assert typically happens if an unstructured CFG is passed
to the pass. This can happen if the pass is run independently
without the structurizer.
llvm-svn: 322685
Summary:
Loading a vector of 4 half-precision FP sometimes results in an LD1
of 2 single-precision FP + a reversal. This results in an incorrect
byte swap due to the conversion from little endian to big endian.
In order to generate the correct byte swap, it is easier to
generate the correct LD1 of 4 half-precision FP, thus avoiding the
subsequent reversal.
Reviewers: craig.topper, jmolloy, olista01
Reviewed By: olista01
Subscribers: efriedma, samparker, SjoerdMeijer, rogfer01, aemerson, rengolin, javed.absar, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D41863
llvm-svn: 322663
When the compressed instruction set is enabled, the 16-bit c.nop can be
generated if necessary.
Differential Revision: https://reviews.llvm.org/D41221
Patch by Shiva Chen.
llvm-svn: 322658
Mark G_FPEXT and G_FPTRUNC as legal or libcall, depending on hardware
support, but only for conversions between float and double.
Also add the necessary boilerplate so that the LegalizerHelper can
introduce the required libcalls. This also works only for float and
double, but isn't too difficult to extend when the need arises.
llvm-svn: 322651
The match* functions have the annoying behavior of modifying its inputs.
Save and restore the inputs, just in case the early out for AVX512 is
hit. This is still not great and its only a matter of time this kind of
bug happens again, but I couldn't come up with a better pattern without
rewriting significant chunks of this code. Fixes PR35977.
llvm-svn: 322644
When "xer" is specified as clobbered register in inline assembler, clang can accept it, but llvm simply ignore it when lowered to machine instructions. It may cause problems later in scheduler.
This patch adds a new register XER aliased to CARRY, and adds it to register class CARRYRC. Now PPCTargetLowering::getRegForInlineAsmConstraint can return correct register number for inline asm constraint "{xer}", and scheduler behave correctly.
Differential Revision: https://reviews.llvm.org/D41967
llvm-svn: 322591
Summary:
This patch adds CustomRenderer which renders the matched
operands to the specified instruction.
Targets can enable the matching of SDNodeXForm by adding
a definition that inherits from GICustomOperandRenderer and
GISDNodeXFormEquiv as follows.
def gi_imm8 : GICustomOperandRenderer<"renderImm8”>,
GISDNodeXFormEquiv<imm8_xform>;
Custom renderer functions should be of the form:
void render(MachineInstrBuilder &MIB, const MachineInstr &I);
Reviewers: dsanders, ab, rovka
Reviewed By: dsanders
Subscribers: kristof.beyls, javed.absar, llvm-commits, mgrang, qcolombet
Differential Revision: https://reviews.llvm.org/D42012
llvm-svn: 322582
These pseudos are not supposed to be visible to user.
This patch reduced the auto-generated instruction matcher. For example,
the following words are removed from keyword list of LLVM BPF assembler.
- MCK__35_, // '#'
- MCK__COLON_, // ':'
- MCK__63_, // '?'
- MCK_ADJCALLSTACKDOWN, // 'ADJCALLSTACKDOWN'
- MCK_ADJCALLSTACKUP, // 'ADJCALLSTACKUP'
- MCK_PSEUDO, // 'PSEUDO'
- MCK_Select, // 'Select'
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
llvm-svn: 322535
As commented on the existing code:
// The Reg operand should be a virtual register, which is defined
// outside the current basic block. DAG combiner has done a pretty
// good job in removing truncating inside a single basic block.
However, when the Reg operand comes from bpf_load_[byte | half | word]
intrinsics, the generic optimizer doesn't understand their results are
zero extended, so these single basic block elimination opportunities were
missed.
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
llvm-svn: 322534
Prior to this we had a separate instruction and register class that excluded eax to prevent matching the instruction that would encode with 0x90.
This patch changes this to just use an InstAlias to force xchgl %eax, %eax to use XCHG32rr instruction in 64-bit mode. This gets rid of the separate instruction and register class.
llvm-svn: 322532
As mentioned on PR35869, (and came up recently on D41517) we don't create a MMX zero register via the PXOR but instead perform a spill to stack from a XMM zero register.
This patch adds support for direct MMX zero vector creation and should make it easier to add better constant vector creation in the future as well.
Differential Revision: https://reviews.llvm.org/D41908
llvm-svn: 322525
Add support for custom execution domain fixing and implement support for BLENDPD/BLENDPS/PBLENDD/PBLENDW.
Differential Revision: https://reviews.llvm.org/D42042
llvm-svn: 322524
In some cases we do not copy implicit defs from pseudo to real
VOP instructions. It has no visible impact at the moment thus no
tests are affected or added.
Differential Revision: https://reviews.llvm.org/D41783
llvm-svn: 322496
Since a load and test instruction treat its operands as signed, it can only
replace a logical compare for EQ/NE uses.
Review: Ulrich Weigand
https://bugs.llvm.org/show_bug.cgi?id=35662
llvm-svn: 322488
Matt Arsenault