This was a pure virtual base class whose purpose was to abstract
away the notion of how you retrieve the layout of a discontiguous
stream of blocks in an Msf file. This led to too many layers of
abstraction making it difficult to figure out what was going on
and extend things. Ultimately, a stream's layout is decided by
its length and the array of block numbers that it lives on. So
rather than have an abstract base class which can return this in
any number of ways, it's more straightforward to simply store them
as fields of a trivial struct, and also to give a more appropriate
name.
This patch does that. It renames IMsfStreamData to MsfStreamLayout,
and deletes the 2 concrete implementations, DirectoryStreamData
and IndexedStreamData. MsfStreamLayout is a trivial struct
with the necessary data.
llvm-svn: 277018
These loop from 0 to AEK_XSCALE, which is currently defined as 0x80000000, and
thus the tests loop over the entire int range, which is unreasonable
and also too slow in debug builds.
llvm-svn: 276969
Add unittest to {ARM | AArch64}TargetParser,and by the way correct problems as below:
1.Correct a incorrect indexing problem in AArch64TargetParser. The architecture enumeration
is shared across ARM and AArch64 in original implementation.But In the code,I just used the
index which was offset by the ARM, and this would index into the array incorrectly. To make
AArch64 has its own arch enum,or we will do a lot of slowly iterating.
2.Correct a spelling error. The parameter of llvm::AArch64::getArchExtName.
3.Correct a writing mistake, in llvm::ARM::parseArchISA.
Differential Revision: https://reviews.llvm.org/D21785
llvm-svn: 276957
Change the syntax to use `%0.sub8` to denote a subregister.
This seems like a more natural fit to denote subregisters; I also plan
to introduce a new ":classname" syntax in upcoming patches to denote the
register class of a vreg.
Note that this commit disallows plain identifiers to start with a '.'
character. This shouldn't affect anything as external names/IR
references are all prefixed with '$'/'%', plain identifiers are only
used for instruction names, register mask names and subreg indexes.
Differential Revision: https://reviews.llvm.org/D22390
llvm-svn: 276815
If we move a last-use register read to a later position we may skip
intermediate segments. This may require us to not only extend the
segment before the NewIdx, but also extend the segment live-in to
OldIdx.
This switches LiveIntervalTest to use AMDGPU so we can test subregister
liveness.
llvm-svn: 276724
This adds versions of operator + and - which are optimized for the LHS/RHS of the
operator being RValue's. When an RValue is available, we can use its storage space
instead of allocating new space.
On code such as ConstantRange which makes heavy use of APInt's over 64-bits in size,
this results in significant numbers of saved allocations.
Thanks to David Blaikie for all the review and most of the code here.
llvm-svn: 276470
This provides a better layering of responsibilities among different
aspects of PDB writing code. Some of the MSF related code was
contained in CodeView, and some was in PDB prior to this. Further,
we were often saying PDB when we meant MSF, and the two are
actually independent of each other since in theory you can have
other types of data besides PDB data in an MSF. So, this patch
separates the MSF specific code into its own library, with no
dependencies on anything else, and DebugInfoCodeView and
DebugInfoPDB take dependencies on DebugInfoMsf.
llvm-svn: 276458
This allows ErrorAsOutParameter to work better with "optional" errors. For
example, consider a function where for certain input values it is known that
the function can't fail. This can now be written as:
Result foo(Arg X, Error *Err) {
ErrorAsOutParameter EAO(Err);
if (<Error Condition>) {
if (Err)
*Err = <report error>;
else
llvm_unreachable("Unexpected failure!");
}
}
Rather than having to construct an ErrorAsOutParameter under every conditional
where Err is known to be non-null.
llvm-svn: 276430
This provides an elegant pattern to solve the "construct if not in map
already" problem we have many times in LLVM. Without try_emplace we
either have to rely on a sentinel value (nullptr) or do two lookups.
llvm-svn: 276277
Add a "-j" option to llvm-profdata to control the number of threads used.
Auto-detect NumThreads when it isn't specified, and avoid spawning threads when
they wouldn't be beneficial.
I tested this patch using a raw profile produced by clang (147MB). Here is the
time taken to merge 4 copies together on my laptop:
No thread pool: 112.87s user 5.92s system 97% cpu 2:01.08 total
With 2 threads: 134.99s user 26.54s system 164% cpu 1:33.31 total
Changes since the initial commit:
- When handling odd-length inputs, call ThreadPool::wait() before merging the
last profile. Should fix a race/off-by-one (see r275937).
Differential Revision: https://reviews.llvm.org/D22438
llvm-svn: 275938
Add a "-j" option to llvm-profdata to control the number of threads
used. Auto-detect NumThreads when it isn't specified, and avoid spawning
threads when they wouldn't be beneficial.
I tested this patch using a raw profile produced by clang (147MB). Here is the
time taken to merge 4 copies together on my laptop:
No thread pool: 112.87s user 5.92s system 97% cpu 2:01.08 total
With 2 threads: 134.99s user 26.54s system 164% cpu 1:33.31 total
Differential Revision: https://reviews.llvm.org/D22438
llvm-svn: 275921
Summary:
Given that we had a bug on max/minUIntN(64), these should have tests
too.
Reviewers: rnk
Subscribers: dylanmckay, llvm-commits
Differential Revision: https://reviews.llvm.org/D22443
llvm-svn: 275723
Summary:
Previously we were doing 1 << S. "1" is an int, so this doesn't work
when S >= 32.
This patch also adds some static_asserts to these functions to ensure
that we don't hit UB by shifting left too much.
Reviewers: rnk
Subscribers: llvm-commits, dylanmckay
Differential Revision: https://reviews.llvm.org/D22441
llvm-svn: 275719
Doing "I++" inside of an EXPECT_* triggers
warning: expression with side effects has no effect in an unevaluated context
because EXPECT_* partially expands to
EqHelper<(sizeof(::testing::internal::IsNullLiteralHelper(i++)) == 1)>
which is an unevaluated context.
llvm-svn: 275717
Summary:
This shift is undefined behavior (and, as compiled by clang, gives the
wrong answer for maxUIntN(64)).
Reviewers: mkuper
Subscribers: llvm-commits, jroelofs, rsmith
Differential Revision: https://reviews.llvm.org/D22430
llvm-svn: 275656
Block 1 and 2 of an MSF file are bit vectors that represent the
list of blocks allocated and free in the file. We had been using
these blocks to write stream data and other data, so we mark them
as the free page map now. We don't yet serialize these pages to
the disk, but at least we make a note of what it is, and avoid
writing random data to them.
Doing this also necessitated cleaning up some of the tests to be
more general and hardcode fewer values, which is nice.
llvm-svn: 275629
Previously we would read a PDB, then write some of it back out,
but write the directory, super block, and other pertinent metadata
back out unchanged. This generates incorrect PDBs since the amount
of data written was not always the same as the amount of data read.
This patch changes things to use the newly introduced `MsfBuilder`
class to write out a correct and accurate set of Msf metadata for
the data *actually* written, which opens up the door for adding and
removing type records, symbol records, and other types of data to
an existing PDB.
llvm-svn: 275627
Doing "I++" inside of an EXPECT_* triggers
warning: expression with side effects has no effect in an unevaluated context
because EXPECT_* partially expands to
EqHelper<(sizeof(::testing::internal::IsNullLiteralHelper(MockObjects[I++] + 1)) == 1)>
which is an unevaluated context.
llvm-svn: 275293
Summary: Normally when you do a bitwise operation on an enum value, you
get back an instance of the underlying type (e.g. int). But using this
macro, bitwise ops on your enum will return you back instances of the
enum. This is particularly useful for enums which represent a
combination of flags.
Suppose you have a function which takes an int and a set of flags. One
way to do this would be to take two numeric params:
enum SomeFlags { F1 = 1, F2 = 2, F3 = 4, ... };
void Fn(int Num, int Flags);
void foo() {
Fn(42, F2 | F3);
}
But now if you get the order of arguments wrong, you won't get an error.
You might try to fix this by changing the signature of Fn so it accepts
a SomeFlags arg:
enum SomeFlags { F1 = 1, F2 = 2, F3 = 4, ... };
void Fn(int Num, SomeFlags Flags);
void foo() {
Fn(42, static_cast<SomeFlags>(F2 | F3));
}
But now we need a static cast after doing "F2 | F3" because the result
of that computation is the enum's underlying type.
This patch adds a mechanism which gives us the safety of the second
approach with the brevity of the first.
enum SomeFlags {
F1 = 1, F2 = 2, F3 = 4, ..., F_MAX = 128,
LLVM_MARK_AS_BITMASK_ENUM(F_MAX)
};
void Fn(int Num, SomeFlags Flags);
void foo() {
Fn(42, F2 | F3); // No static_cast.
}
The LLVM_MARK_AS_BITMASK_ENUM macro enables overloads for bitwise
operators on SomeFlags. Critically, these operators return the enum
type, not its underlying type, so you don't need any static_casts.
An advantage of this solution over the previously-proposed BitMask class
[0, 1] is that we don't need any wrapper classes -- we can operate
directly on the enum itself.
The approach here is somewhat similar to OpenOffice's typed_flags_set
[2]. But we skirt the need for a wrapper class (and a good deal of
complexity) by judicious use of enable_if. We SFINAE on the presence of
a particular enumerator (added by the LLVM_MARK_AS_BITMASK_ENUM macro)
instead of using a traits class so that it's impossible to use the enum
before the overloads are present. The solution here also seamlessly
works across multiple namespaces.
[0] http://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20150622/283369.html
[1] http://lists.llvm.org/pipermail/llvm-commits/attachments/20150623/073434b6/attachment.obj
[2] https://cgit.freedesktop.org/libreoffice/core/tree/include/o3tl/typed_flags_set.hxx
Reviewers: chandlerc, rsmith
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D22279
llvm-svn: 275292
Because of the goop involved in the EXPECT_EQ macro, we were getting the
following warning
expression with side effects has no effect in an unevaluated context
because the "I++" was being used inside of a template type:
switch (0) case 0: default: if (const ::testing::AssertionResult gtest_ar = (::testing::internal:: EqHelper<(sizeof(::testing::internal::IsNullLiteralHelper(Args[I++])) == 1)>::Compare("Args[I++]", "&A", Args[I++], &A))) ; else ::testing::internal::AssertHelper(::testing::TestPartResult::kNonFatalFailure, "../src/unittests/IR/FunctionTest.cpp", 94, gtest_ar.failure_message()) = ::testing::Message();
llvm-svn: 275291
Summary:
This represents the adjustment applied to the implicit 'this' parameter
in the prologue of a virtual method in the MS C++ ABI. The adjustment is
always zero unless multiple inheritance is involved.
This increases the size of DISubprogram by 8 bytes, unfortunately. The
adjustment really is a signed 32-bit integer. If this size increase is
too much, we could probably win it back by splitting out a subclass with
info specific to virtual methods (virtuality, vindex, thisadjustment,
containingType).
Reviewers: aprantl, dexonsmith
Subscribers: aaboud, amccarth, llvm-commits
Differential Revision: http://reviews.llvm.org/D21614
llvm-svn: 274325
When concatenating two error lists the ErrorList::join method (which is called
by joinErrors) was failing to set the checked bit on the second error, leading
to a 'failure to check error' assertion.
llvm-svn: 274249
re-insertion of entries into the worklist moves them to the end.
This is fairly similar to a SetVector, but helps in the case where in
addition to not inserting duplicates you want to adjust the sequence of
a pop-off-the-back worklist.
I'm not at all attached to the name of this data structure if others
have better suggestions, but this is one that David Majnemer brought up
in IRC discussions that seems plausible.
I've trimmed the interface down somewhat from SetVector's interface
because several things make less sense here IMO: iteration primarily.
I'd prefer to add these back as we have users that need them. My use
case doesn't even need all of what is provided here. =]
I've also included a basic unittest to make sure this functions
reasonably.
Differential Revision: http://reviews.llvm.org/D21866
llvm-svn: 274198
This fixes an issue where occurrence counts would be unexpectedly
reset when parsing different parts of a command line multiple
times.
**ORIGINAL COMMIT MESSAGE**
This allows command line tools to use syntaxes like the following:
llvm-foo.exe command1 -o1 -o2
llvm-foo.exe command2 -p1 -p2
Where command1 and command2 contain completely different sets of
valid options. This is backwards compatible with previous uses
of llvm cl which did not support subcommands, as any option
which specifies no optional subcommand (e.g. all existing
code) goes into a special "top level" subcommand that expects
dashed options to appear immediately after the program name.
For example, code which is subcommand unaware would generate
a command line such as the following, where no subcommand
is specified:
llvm-foo.exe -q1 -q2
The top level subcommand can co-exist with actual subcommands,
as it is implemented as an actual subcommand which is searched
if no explicit subcommand is specified. So llvm-foo.exe as
specified above could be written so as to support all three
aforementioned command lines simultaneously.
There is one additional "special" subcommand called AllSubCommands,
which can be used to inject an option into every subcommand.
This is useful to support things like help, so that commands
such as:
llvm-foo.exe --help
llvm-foo.exe command1 --help
llvm-foo.exe command2 --help
All work and display the help for the selected subcommand
without having to explicitly go and write code to handle each
one separately.
This patch is submitted without an example of anything actually
using subcommands, but a followup patch will convert the
llvm-pdbdump tool to use subcommands.
Reviewed By: beanz
llvm-svn: 274171
This allows command line tools to use syntaxes like the following:
llvm-foo.exe command1 -o1 -o2
llvm-foo.exe command2 -p1 -p2
Where command1 and command2 contain completely different sets of
valid options. This is backwards compatible with previous uses
of llvm cl which did not support subcommands, as any option
which specifies no optional subcommand (e.g. all existing
code) goes into a special "top level" subcommand that expects
dashed options to appear immediately after the program name.
For example, code which is subcommand unaware would generate
a command line such as the following, where no subcommand
is specified:
llvm-foo.exe -q1 -q2
The top level subcommand can co-exist with actual subcommands,
as it is implemented as an actual subcommand which is searched
if no explicit subcommand is specified. So llvm-foo.exe as
specified above could be written so as to support all three
aforementioned command lines simultaneously.
There is one additional "special" subcommand called AllSubCommands,
which can be used to inject an option into every subcommand.
This is useful to support things like help, so that commands
such as:
llvm-foo.exe --help
llvm-foo.exe command1 --help
llvm-foo.exe command2 --help
All work and display the help for the selected subcommand
without having to explicitly go and write code to handle each
one separately.
This patch is submitted without an example of anything actually
using subcommands, but a followup patch will convert the
llvm-pdbdump tool to use subcommands.
Reviewed By: beanz
Differential Revision: http://reviews.llvm.org/D21485
llvm-svn: 274054
The bitset metadata currently used in LLVM has a few problems:
1. It has the wrong name. The name "bitset" refers to an implementation
detail of one use of the metadata (i.e. its original use case, CFI).
This makes it harder to understand, as the name makes no sense in the
context of virtual call optimization.
2. It is represented using a global named metadata node, rather than
being directly associated with a global. This makes it harder to
manipulate the metadata when rebuilding global variables, summarise it
as part of ThinLTO and drop unused metadata when associated globals are
dropped. For this reason, CFI does not currently work correctly when
both CFI and vcall opt are enabled, as vcall opt needs to rebuild vtable
globals, and fails to associate metadata with the rebuilt globals. As I
understand it, the same problem could also affect ASan, which rebuilds
globals with a red zone.
This patch solves both of those problems in the following way:
1. Rename the metadata to "type metadata". This new name reflects how
the metadata is currently being used (i.e. to represent type information
for CFI and vtable opt). The new name is reflected in the name for the
associated intrinsic (llvm.type.test) and pass (LowerTypeTests).
2. Attach metadata directly to the globals that it pertains to, rather
than using the "llvm.bitsets" global metadata node as we are doing now.
This is done using the newly introduced capability to attach
metadata to global variables (r271348 and r271358).
See also: http://lists.llvm.org/pipermail/llvm-dev/2016-June/100462.html
Differential Revision: http://reviews.llvm.org/D21053
llvm-svn: 273729
This change is motivated by an upcoming change to the metadata representation
used for CFI. The indirect function call checker needs type information for
external function declarations in order to correctly generate jump table
entries for such declarations. We currently associate such type information
with declarations using a global metadata node, but I plan [1] to move all
such metadata to global object attachments.
In bitcode, metadata attachments for function declarations appear in the
global metadata block. This seems reasonable to me because I expect metadata
attachments on declarations to be uncommon. In the long term I'd also expect
this to be the case for CFI, because we'd want to use some specialized bitcode
format for this metadata that could be read as part of the ThinLTO thin-link
phase, which would mean that it would not appear in the global metadata block.
To solve the lazy loaded metadata issue I was seeing with D20147, I use the
same bitcode representation for metadata attachments for global variables as I
do for function declarations. Since there's a use case for metadata attachments
in the global metadata block, we might as well use that representation for
global variables as well, at least until we have a mechanism for lazy loading
global variables.
In the assembly format, the metadata attachments appear after the "declare"
keyword in order to avoid a parsing ambiguity.
[1] http://lists.llvm.org/pipermail/llvm-dev/2016-June/100462.html
Differential Revision: http://reviews.llvm.org/D21052
llvm-svn: 273336
We recently made MemorySSA own the walker it creates. As a part of this,
the MSSA test fixture was changed to have a `Walker*` instead of a
`unique_ptr<Walker>`. So, we no longer need to do `&*Walker` in order to
get a `Walker*`.
llvm-svn: 273189
pass manager passes' `run` methods.
This removes a bunch of SFINAE goop from the pass manager and just
requires pass authors to accept `AnalysisManager<IRUnitT> &` as a dead
argument. This is a small price to pay for the simplicity of the system
as a whole, despite the noise that changing it causes at this stage.
This will also helpfull allow us to make the signature of the run
methods much more flexible for different kinds af passes to support
things like intelligently updating the pass's progression over IR units.
While this touches many, many, files, the changes are really boring.
Mostly made with the help of my trusty perl one liners.
Thanks to Sean and Hal for bouncing ideas for this with me in IRC.
llvm-svn: 272978
We should update results of the BranchProbabilityInfo after removing block in JumpThreading. Otherwise
we will get dangling pointer inside BranchProbabilityInfo cache.
Differential Revision: http://reviews.llvm.org/D20957
llvm-svn: 272891
Differential Revision: http://reviews.llvm.org/D19842
Corresponding clang patch: http://reviews.llvm.org/D19843
Re-commit after addressing issues with of generating too many warnings for Windows and asan test failures
Patch by Eric Niebler
llvm-svn: 272555
undef uses are no real uses of a register and must be ignored by
findLastUseBefore() so that handleMove() does not produce invalid live
intervals in some cases.
This fixed http://llvm.org/PR28083
llvm-svn: 272446
This fixes an alignment issue by forcing all cached allocations
to be 8 byte aligned, and also fixes an issue arising on big
endian systems by writing ulittle32_t's instead of uint32_t's
in the test.
llvm-svn: 272437
This adds method and tests for writing to a PDB stream. With
this, even a PDB stream which is discontiguous can be treated
as a sequential stream of bytes for the purposes of writing.
Reviewed By: ruiu
Differential Revision: http://reviews.llvm.org/D21157
llvm-svn: 272369
Summary:
Now DISubroutineType has a 'cc' field which should be a DW_CC_ enum. If
it is present and non-zero, the backend will emit it as a
DW_AT_calling_convention attribute. On the CodeView side, we translate
it to the appropriate enum for the LF_PROCEDURE record.
I added a new LLVM vendor specific enum to the list of DWARF calling
conventions. DWARF does not appear to attempt to standardize these, so I
assume it's OK to do this until we coordinate with GCC on how to emit
vectorcall convention functions.
Reviewers: dexonsmith, majnemer, aaboud, amccarth
Subscribers: mehdi_amini, llvm-commits
Differential Revision: http://reviews.llvm.org/D21114
llvm-svn: 272197
The architecture enumeration is shared across ARM and AArch64. However, the
data is not. The code incorrectly would index into the array using the
architecture index which was offset by the ARMv7 architecture enumeration. We
do not have a marker for indicating the architectural family to which the
enumeration belongs so we cannot be clever about offsetting the index (at least
it is not immediately apparent to me). Instead, fall back to the tried-and-true
method of slowly iterating the array (its not a large array, so the impact of
this is not too high).
Because of the incorrect indexing, if we were lucky, we would crash, but usually
we would return an invalid StringRef. We did not have any tests for the AArch64
target parser previously;. Extend the previous tests I had added for ARM to
cover AArch64 for ensuring that we return expected StringRefs.
Take the opportunity to change some iterator types to references.
This work is needed to support parsing `.arch name` directives in the AArch64
target asm parser.
llvm-svn: 272145
This allows mapping of any endian-aware type whose underlying
type (e.g. uint32_t) provides a ScalarTraits specialization.
Reviewed by: majnemer
Differential Revision: http://reviews.llvm.org/D21057
llvm-svn: 272049
Arrange to call verify(Function &) on each function, followed by
verify(Module &), whether the verifier is being used from the pass or
from verifyModule(). As a side effect, this fixes an issue that caused
us not to call verify(Function &) on unmaterialized functions from
verifyModule().
Differential Revision: http://reviews.llvm.org/D21042
llvm-svn: 271956
Also fix slice wrappers drop_front and drop_back.
The unittests are pretty awkward, but do the job; alternatives
welcome!
..and yes, I do have ArrayRefs with more than 4 billion elements.
llvm-svn: 271546
We only considered the length of the operation and the length of the
StreamRef without considered what it meant for the offset to be at a
non-zero position.
llvm-svn: 271496
Add support for the new pass manager to MemorySSA pass.
Change MemorySSA to be computed eagerly upon construction.
Change MemorySSAWalker to be owned by the MemorySSA object that creates
it.
Reviewers: dberlin, george.burgess.iv
Subscribers: mcrosier, llvm-commits
Differential Revision: http://reviews.llvm.org/D19664
llvm-svn: 271432
This will be necessary to allow the global merge pass to attach
multiple debug info metadata nodes to global variables once we reverse
the edge from DIGlobalVariable to GlobalVariable.
Differential Revision: http://reviews.llvm.org/D20414
llvm-svn: 271358
This tidies up some code that was manually constructing RuntimeDyld::SymbolInfo
instances from JITSymbols. It will save more mess in the future when
JITSymbol::getAddress is extended to return an Expected<TargetAddress> rather
than just a TargetAddress, since we'll be able to embed the error checking in
the conversion.
llvm-svn: 271350
StringError can be used to represent Errors that aren't recoverable based on
the error type, but that have a useful error message that can be reported to
the user or logged.
llvm-svn: 270948
APInt::slt was copying the LHS and RHS in to temporaries then making
them unsigned so that it could use an unsigned comparision. It did
this even on the paths which were trivial to give results for, such
as the sign bit of the LHS being set while RHS was not set.
This changes the logic to return out immediately in the trivial cases,
and use an unsigned comparison in the remaining cases. But this time,
just use the unsigned comparison directly without creating any temporaries.
This works because, for example:
true = (-2 slt -1) = (0xFE ult 0xFF)
Also added some tests explicitly for slt with APInt's larger than 64-bits
so that this new code is tested.
Using the memory for 'opt -O2 verify-uselistorder.lto.opt.bc -o opt.bc'
(see r236629 for details), this reduces the number of allocations from
26.8M to 23.9M.
llvm-svn: 270881
Since r268966 the modern Verifier pass defaults to stripping invalid debug info
in nonasserts builds. This patch ports this behavior back to the legacy
Verifier pass as well. The primary motivation is that the clang frontend
accepts bitcode files as input but is still using the legacy pass pipeline.
Background: The problem I'm trying to solve with this sequence of patches is
that historically we've done a really bad job at verifying debug info. We want
to be able to make the verifier stricter without having to worry about breaking
bitcode compatibility with existing producers. For example, we don't necessarily
want IR produced by an older version of clang to be rejected by an LTO link just
because of malformed debug info, and rather provide an option to strip it. Note
that merely outdated (but well-formed) debug info would continue to be
auto-upgraded in this scenario.
http://reviews.llvm.org/D20629
<rdar://problem/26448800>
llvm-svn: 270768
This removes the subclasses of ProfileSummary, moves the members of the derived classes to the base class.
Differential Revision: http://reviews.llvm.org/D20390
llvm-svn: 270143
Transition InstrProf and Coverage over to the stricter Error/Expected
interface.
Changes since the initial commit:
- Fix error message printing in llvm-profdata.
- Check errors in loadTestingFormat() + annotateAllFunctions().
- Defer error handling in InstrProfIterator to InstrProfReader.
- Remove the base ProfError class to work around an MSVC ICE.
Differential Revision: http://reviews.llvm.org/D19901
llvm-svn: 270020
Having an enum member named Default is quite confusing: Is it distinct
from the others?
This patch removes that member and instead uses Optional<Reloc> in
places where we have a user input that still hasn't been maped to the
default value, which is now clear has no be one of the remaining 3
options.
llvm-svn: 269988
Summary:
Add support to control where files for a distributed backend (the
individual index files and optional imports files) are created.
This is invoked with a new thinlto-prefix-replace option in the gold
plugin and llvm-lto. If specified, expects a string of the form
"oldprefix:newprefix", and instead of generating these files in the
same directory path as the corresponding bitcode file, will use a path
formed by replacing the bitcode file's path prefix matching oldprefix
with newprefix.
Also add a new replace_path_prefix helper to Path.h in libSupport.
Depends on D19636.
Reviewers: joker.eph
Subscribers: llvm-commits, joker.eph
Differential Revision: http://reviews.llvm.org/D19644
llvm-svn: 269771
Transition InstrProf and Coverage over to the stricter Error/Expected
interface.
Changes since the initial commit:
- Address undefined-var-template warning.
- Fix error message printing in llvm-profdata.
- Check errors in loadTestingFormat() + annotateAllFunctions().
- Defer error handling in InstrProfIterator to InstrProfReader.
Differential Revision: http://reviews.llvm.org/D19901
llvm-svn: 269694
Transition InstrProf and Coverage over to the stricter Error/Expected
interface.
Changes since the initial commit:
- Fix error message printing in llvm-profdata.
- Check errors in loadTestingFormat() + annotateAllFunctions().
- Defer error handling in InstrProfIterator to InstrProfReader.
Differential Revision: http://reviews.llvm.org/D19901
llvm-svn: 269491
Transition InstrProf and Coverage over to the stricter Error/Expected
interface.
Differential Revision: http://reviews.llvm.org/D19901
llvm-svn: 269462
a sequence of values.
It increments through the values in the half-open range: [Begin, End),
producing those values when indirecting the iterator. It should support
integers, iterators, and any other type providing these basic arithmetic
operations.
This came up in the C++ standards committee meeting, and it seemed like
a useful construct that LLVM might want as well, and I wanted to
understand how easily we could solve it. I suspect this can be used to
write simpler counting loops even in LLVM along the lines of:
for (int i : seq(0, v.size())) {
...
};
As part of this, I had to fix the lack of a proxy object returned from
the operator[] in our iterator facade.
Differential Revision: http://reviews.llvm.org/D17870
llvm-svn: 269390
Summary:
...loop after the last iteration.
This is really hard to do correctly. The core problem is that we need to
model liveness through the induction PHIs from iteration to iteration in
order to get the correct results, and we need to correctly de-duplicate
the common subgraphs of instructions feeding some subset of the
induction PHIs. All of this can be driven either from a side effect at
some iteration or from the loop values used after the loop finishes.
This patch implements this by storing the forward-propagating analysis
of each instruction in a cache to recall whether it was free and whether
it has become live and thus counted toward the total unroll cost. Then,
at each sink for a value in the loop, we recursively walk back through
every value that feeds the sink, including looping back through the
iterations as needed, until we have marked the entire input graph as
live. Because we cache this, we never visit instructions more than twice
-- once when we analyze them and put them into the cache, and once when
we count their cost towards the unrolled loop. Also, because the cache
is only two bits and because we are dealing with relatively small
iteration counts, we can store all of this very densely in memory to
avoid this from becoming an excessively slow analysis.
The code here is still pretty gross. I would appreciate suggestions
about better ways to factor or split this up, I've stared too long at
the algorithmic side to really have a good sense of what the design
should probably look at.
Also, it might seem like we should do all of this bottom-up, but I think
that is a red herring. Specifically, the simplification power is *much*
greater working top-down. We can forward propagate very effectively,
even across strange and interesting recurrances around the backedge.
Because we use data to propagate, this doesn't cause a state space
explosion. Doing this level of constant folding, etc, would be very
expensive to do bottom-up because it wouldn't be until the last moment
that you could collapse everything. The current solution is essentially
a top-down simplification with a bottom-up cost accounting which seems
to get the best of both worlds. It makes the simplification incremental
and powerful while leaving everything dead until we *know* it is needed.
Finally, a core property of this approach is its *monotonicity*. At all
times, the current UnrolledCost is a conservatively low estimate. This
ensures that we will never early-exit from the analysis due to exceeding
a threshold when if we had continued, the cost would have gone back
below the threshold. These kinds of bugs can cause incredibly hard to
track down random changes to behavior.
We could use a techinque similar (but much simpler) within the inliner
as well to avoid considering speculated code in the inline cost.
Reviewers: chandlerc
Subscribers: sanjoy, mzolotukhin, llvm-commits
Differential Revision: http://reviews.llvm.org/D11758
llvm-svn: 269388
Remove the ModuleLevelChanges argument, and the ability to create new
subprograms for cloned functions. The latter was added without review in
r203662, but it has no in-tree clients (all non-test callers pass false
for ModuleLevelChanges [1], so it isn't reachable outside of tests). It
also isn't clear that adding a duplicate subprogram to the compile unit is
always the right thing to do when cloning a function within a module. If
this functionality comes back it should be accompanied with a more concrete
use case.
Furthermore, all in-tree clients add the returned function to the module.
Since that's pretty much the only sensible thing you can do with the function,
just do that in CloneFunction.
[1] http://llvm-cs.pcc.me.uk/lib/Transforms/Utils/CloneFunction.cpp/rCloneFunction
Differential Revision: http://reviews.llvm.org/D18628
llvm-svn: 269110
Add convenience function to create MachineModuleInfo and
MachineFunctionAnalysis passes and add them to a pass manager.
Despite factoring out some shared code in
LiveIntervalTest/LLVMTargetMachine this will be used by my upcoming llc
change.
llvm-svn: 269002
allow the transformation to strip invalid debug info.
This patch separates the Verifier into an analysis and a transformation
pass, with the transformation pass optionally stripping malformed
debug info.
The problem I'm trying to solve with this sequence of patches is that
historically we've done a really bad job at verifying debug info. We want
to be able to make the verifier stricter without having to worry about
breaking bitcode compatibility with existing producers. For example, we
don't necessarily want IR produced by an older version of clang to be
rejected by an LTO link just because of malformed debug info, and rather
provide an option to strip it. Note that merely outdated (but well-formed)
debug info would continue to be auto-upgraded in this scenario.
http://reviews.llvm.org/D19988
rdar://problem/25818489
This reapplies r268937 without modifications.
llvm-svn: 268966
allow the transformation to strip invalid debug info.
This patch separates the Verifier into an analysis and a transformation
pass, with the transformation pass optionally stripping malformed
debug info.
The problem I'm trying to solve with this sequence of patches is that
historically we've done a really bad job at verifying debug info. We want
to be able to make the verifier stricter without having to worry about
breaking bitcode compatibility with existing producers. For example, we
don't necessarily want IR produced by an older version of clang to be
rejected by an LTO link just because of malformed debug info, and rather
provide an option to strip it. Note that merely outdated (but well-formed)
debug info would continue to be auto-upgraded in this scenario.
http://reviews.llvm.org/D19988
rdar://problem/25818489
llvm-svn: 268937
toString() consumes an Error and returns a string representation of its
contents. This commit also adds a message() method to ErrorInfoBase for
convenience.
Differential Revision: http://reviews.llvm.org/D19883
llvm-svn: 268465
A loop pass that didn't preserve this entire set of passes wouldn't
play well with other loop passes, since these are generally a basic
requirement to do any interesting transformations to a loop.
Adds a helper to get the set of analyses a loop pass should preserve,
and checks that any loop pass we run satisfies the requirement.
llvm-svn: 268444
We have it for StringRef but not ArrayRef, and ArrayRef has drop_back,
so I see no reason it shouldn't have drop_front. Splitting this out of a
change that I have that will use this funcitonality.
llvm-svn: 268434
Check for success values in the CoverageMappingTest unit test file.
This is part of a series of patches to transition ProfileData over to
the stricter Error/Expected interface.
llvm-svn: 268420
Check for success values in the InstrProfTest unit test file.
This is part of a series of patches to transition ProfileData over to
the stricter Error/Expected interface.
llvm-svn: 268402
This patch fixes two somewhat related bugs in MemorySSA's caching
walker. These bugs were found because D19695 brought up the problem
that we'd have defs cached to themselves, which is incorrect.
The bugs this fixes are:
- We would sometimes skip the nearest clobber of a MemoryAccess, because
we would query our cache for a given potential clobber before
checking if the potential clobber is the clobber we're looking for.
The cache entry for the potential clobber would point to the nearest
clobber *of the potential clobber*, so if that was a cache hit, we'd
ignore the potential clobber entirely.
- There are times (sometimes in DFS, sometimes in the getClobbering...
functions) where we would insert cache entries that say a def
clobbers itself.
There's a bit of common code between the fixes for the bugs, so they
aren't split out into multiple commits.
This patch also adds a few unit tests, and refactors existing tests a
bit to reduce the duplication of setup code.
llvm-svn: 268087
In gcc, \ escapes every character in response files. It is true that this makes
it harder to mention Windows files in rsp files, but not doing this means clang
disagrees with gcc, and also disagrees with the shell (on non-Windows) which
rsp file quoting is supposed to match. clang isn't free to choose what to do
here.
In general, the idea for response files is to take bits of your command line
and write them to a file unchanged, and have things work the same way. Since
the command line would've been interpreted by the shell, things in the rsp file
need to be subject to the same shell quoting rules.
People who want to put Windows-style paths in their response files either need
to do any of:
* escape their backslashes
* or use clang-cl which uses cl.exe/cmd.exe quoting rules
* pass --rsp-quoting=windows to clang to tell it to use
cl.exe/cmd.exe quoting rules for response files.
Fixes PR27464.
http://reviews.llvm.org/D19417
llvm-svn: 267556
This replaces use of std::error_code and ErrorOr in the ORC RPC support library
with Error and Expected. This required updating the OrcRemoteTarget API, Client,
and server code, as well as updating the Orc C API.
This patch also fixes several instances where Errors were dropped.
llvm-svn: 267457
If several regions cover the same area of code, we have to restore
the combined value for that area when return from a nested region.
This patch achieves that by combining regions before calling buildSegments.
Differential Revision: http://reviews.llvm.org/D18610
llvm-svn: 267390
Eliminate DITypeIdentifierMap and make DITypeRef a thin wrapper around
DIType*. It is no longer legal to refer to a DICompositeType by its
'identifier:', and DIBuilder no longer retains all types with an
'identifier:' automatically.
Aside from the bitcode upgrade, this is mainly removing logic to resolve
an MDString-based reference to an actualy DIType. The commits leading
up to this have made the implicit type map in DICompileUnit's
'retainedTypes:' field superfluous.
This does not remove DITypeRef, DIScopeRef, DINodeRef, and
DITypeRefArray, or stop using them in DI-related metadata. Although as
of this commit they aren't serving a useful purpose, there are patchces
under review to reuse them for CodeView support.
The tests in LLVM were updated with deref-typerefs.sh, which is attached
to the thread "[RFC] Lazy-loading of debug info metadata":
http://lists.llvm.org/pipermail/llvm-dev/2016-April/098318.html
llvm-svn: 267296
Each reference to an unresolved MDNode is expensive, since the RAUW
support in MDNode uses a separate allocation and side map. Since
a distinct MDNode doesn't require its operands on creation (unlike
uniuqed nodes, there's no need to check for structural equivalence),
use nullptr for any of its unresolved operands. Besides reducing the
burden on MDNode maps, this can avoid allocating temporary MDNodes in
the first place.
We need some way to track operands. Invent DistinctMDOperandPlaceholder
for this purpose, which is a Metadata subclass that holds an ID and
points at its single user. DistinctMDOperandPlaceholder::replaceUseWith
is just like RAUW, but its name highlights that there is only ever
exactly one use.
There is no support for moving (or, obviously, copying) these. Move
support would be possible but expensive; leaving it unimplemented
prevents user error. In the BitcodeReader I originally considered
allocating on a BumpPtrAllocator and keeping a vector of pointers to
them, and then I realized that std::deque implements exactly this.
A couple of obvious follow-ups:
- Change ValueEnumerator to emit distinct nodes first to take more
advantage of this optimization. (How convenient... I think I might
have a couple of patches for this.)
- Change DIBuilder and its consumers (like CGDebugInfo in clang) to
use something like this when constructing debug info in the first
place.
llvm-svn: 267270
A DenseMap doesn't store the hashes, so it needs to recompute them when
the table is resized.
In some applications the hashing cost is noticeable. That is the case
for example in lld for symbol names (StringRef).
This patch adds a templated structure that can wraps any value that can
go in a DenseMap and caches the hash.
llvm-svn: 266981
Add a new method, DICompositeType::buildODRType, that will create or
mutate the DICompositeType for a given ODR identifier, and use it in
LLParser and BitcodeReader instead of DICompositeType::getODRType.
The logic is as follows:
- If there's no node, create one with the given arguments.
- Else, if the current node is a forward declaration and the new
arguments would create a definition, mutate the node to match the
new arguments.
- Else, return the old node.
This adds a missing feature supported by the current DITypeIdentifierMap
(which I'm slowly making redudant). The only remaining difference is
that the DITypeIdentifierMap has a "the-last-one-wins" rule, whereas
DICompositeType::buildODRType has a "the-first-one-wins" rule.
For now I'm leaving behind DICompositeType::getODRType since it has
obvious, low-level semantics that are convenient for unit testing.
llvm-svn: 266786
The second test in this file is actually testing DICompositeType API,
not LLVMContext API (after r266742 moved it to a higher level). This
really doesn't make sense in an LLVMContextTest. Rename the tests
before adding more.
llvm-svn: 266764
Lift the API for debug info ODR type uniquing up a layer. Instead of
clients managing the map directly on the LLVMContext, add a static
method to DICompositeType called getODRType and handle the map in the
background. Also adds DICompositeType::getODRTypeIfExists, so far just
for convenience in the unit tests.
This simplifies the logic in LLParser and BitcodeReader. Because of
argument spam there are actually a few more lines of code now; I'll see
if I come up with a reasonable way to clean that up.
llvm-svn: 266742
Tighten up the API for debug info ODR type uniquing in LLVMContext. The
only reason to allow other DIType subclasses is to make the unit tests
prettier :/.
llvm-svn: 266737
As per David's review, rename everything in the new API for ODR type
uniquing of debug info.
ensureDITypeMap => enableDebugTypeODRUniquing
destroyDITypeMap => disableDebugTypeODRUniquing
hasDITypeMap => isODRUniquingDebugTypes
llvm-svn: 266713
The root of the problem was that findMainViewFileID(File, Function)
could return some ID for any given file, even though that file
was not the main file for that function.
This patch ensures that the result of this function is conformed
with the result of findMainViewFileID(Function).
This commit reapplies r266436, which was reverted by r266458,
with the .covmapping file serialized in v1 format.
Differential Revision: http://reviews.llvm.org/D18787
llvm-svn: 266620
This reverts commit r266477.
This commit introduces cyclic dependency. This commit has "Analysis" depend on "ProfileData",
while "ProfileData" depends on "Object", which depends on "BitCode", which
depends on "Analysis".
llvm-svn: 266619
Three problems:
1. <future> can't be easily used. If you must use it, see
include/Support/ThreadPool.h for how.
2. constexpr problems, even after 266588.
3. Move assignment operators can't be defaulted in MSVC2013.
llvm-svn: 266615
Removed some unused headers, replaced some headers with forward class declarations.
Found using simple scripts like this one:
clear && ack --cpp -l '#include "llvm/ADT/IndexedMap.h"' | xargs grep -L 'IndexedMap[<]' | xargs grep -n --color=auto 'IndexedMap'
Patch by Eugene Kosov <claprix@yandex.ru>
Differential Revision: http://reviews.llvm.org/D19219
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 266595
asynchronous call/handle. Also updates the ORC remote JIT API to use the new
scheme.
The previous version of the RPC tools only supported void functions, and
required the user to manually call a paired function to return results. This
patch replaces the Procedure typedef (which only supported void functions) with
the Function typedef which supports return values, e.g.:
Function<FooId, int32_t(std::string)> Foo;
The RPC primitives and channel operations are also expanded. RPC channels must
support four new operations: startSendMessage, endSendMessage,
startRecieveMessage and endRecieveMessage, to handle channel locking. In
addition, serialization support for tuples to RPCChannels is added to enable
multiple return values.
The RPC primitives are expanded from callAppend, call, expect and handle, to:
appendCallAsync - Make an asynchronous call to the given function.
callAsync - The same as appendCallAsync, but calls send on the channel when
done.
callSTHandling - Blocking call for single-threaded code. Wraps a call to
callAsync then waits on the result, using a user-supplied
handler to handle any callbacks from the remote.
callST - The same as callSTHandling, except that it doesn't handle
callbacks - it expects the result to be the first return.
expect and handle - as before.
handleResponse - Handle a response from the remote.
waitForResult - Wait for the response with the given sequence number to arrive.
llvm-svn: 266581
Rather than relying on the structural equivalence of DICompositeType to
merge type definitions, use an explicit map on the LLVMContext that
LLParser and BitcodeReader consult when constructing new nodes.
Each non-forward-declaration DICompositeType with a non-empty
'identifier:' field is stored/loaded from the type map, and the first
definiton will "win".
This map is opt-in: clients that expect ODR types from different modules
to be merged must call LLVMContext::ensureDITypeMap.
- Clients that just happen to load more than one Module in the same
LLVMContext won't magically merge types.
- Clients (like LTO) that want to continue to merge types based on ODR
identifiers should opt-in immediately.
I have updated LTOCodeGenerator.cpp, the two "linking" spots in
gold-plugin.cpp, and llvm-link (unless -disable-debug-info-type-map) to
set this.
With this in place, it will be straightforward to remove the DITypeRef
concept (i.e., referencing types by their 'identifier:' string rather
than pointing at them directly).
llvm-svn: 266549
Stop memoizing ConstantAsMetadata in ValueMapper::mapMetadata. Now we
have to recompute it, but these metadata aren't particularly common, and
it restricts the lifetime of the Metadata map unnecessarily.
(The motivation is that I have a patch which uses a single Metadata map
for the lifetime of IRMover. Mehdi profiled r266446 with the patch
applied and we saw a pretty big speedup in lib/Linker.)
llvm-svn: 266513
This reverts commit r266507, reapplying r266503 (and r266505
"ValueMapper: Use API from r266503 in unit tests, NFC") completely
unchanged.
I reverted because of a bot failure here:
http://lab.llvm.org:8011/builders/lld-x86_64-freebsd/builds/16810/
However, looking more closely, the failure was from a host-compiler
crash (clang 3.7.1) when building:
lib/CodeGen/AsmPrinter/CMakeFiles/LLVMAsmPrinter.dir/DwarfAccelTable.cpp.o
I didn't modify that file, or anything it includes, with that commit.
The next build (which hadn't picked up my revert) got past it:
http://lab.llvm.org:8011/builders/lld-x86_64-freebsd/builds/16811/
I think this was just unfortunate timing. I suppose the bot must be
flakey.
llvm-svn: 266510
This reverts commit r266503, in case it's the root cause of this bot
failure:
http://lab.llvm.org:8011/builders/lld-x86_64-freebsd/builds/16810
I'm also reverting r266505 -- "ValueMapper: Use API from r266503 in unit
tests, NFC" -- since it's in the way.
llvm-svn: 266507
Adds an interface to get ProfileSummary for a module and makes InlineCost use ProfileSummary to get max function count.
Differential Revision: http://reviews.llvm.org/D18622
llvm-svn: 266477
Currently each Function points to a DISubprogram and DISubprogram has a
scope field. For member functions the scope is a DICompositeType. DIScopes
point to the DICompileUnit to facilitate type uniquing.
Distinct DISubprograms (with isDefinition: true) are not part of the type
hierarchy and cannot be uniqued. This change removes the subprograms
list from DICompileUnit and instead adds a pointer to the owning compile
unit to distinct DISubprograms. This would make it easy for ThinLTO to
strip unneeded DISubprograms and their transitively referenced debug info.
Motivation
----------
Materializing DISubprograms is currently the most expensive operation when
doing a ThinLTO build of clang.
We want the DISubprogram to be stored in a separate Bitcode block (or the
same block as the function body) so we can avoid having to expensively
deserialize all DISubprograms together with the global metadata. If a
function has been inlined into another subprogram we need to store a
reference the block containing the inlined subprogram.
Attached to https://llvm.org/bugs/show_bug.cgi?id=27284 is a python script
that updates LLVM IR testcases to the new format.
http://reviews.llvm.org/D19034
<rdar://problem/25256815>
llvm-svn: 266446
The root of the problem was that findMainViewFileID(File, Function)
could return some ID for any given file, even though that file
was not the main file for that function.
This patch ensures that the result of this function is conformed
with the result of findMainViewFileID(Function).
Differential Revision: http://reviews.llvm.org/D18787
llvm-svn: 266436
At the same time, fixes InstructionsTest::CastInst unittest: yes
you can leave the IR in an invalid state and exit when you don't
destroy the context (like the global one), no longer now.
This is the first part of http://reviews.llvm.org/D19094
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 266379
Fix a major bug from r265456. Although it's now much rarer, ValueMapper
sometimes has to duplicate cycles. The
might-transitively-reference-a-temporary counts don't decrement on their
own when there are cycles, and you need to call MDNode::resolveCycles to
fix it.
r265456 was checking the input nodes to see if they were unresolved.
This is useless; they should never be unresolved. Instead we should
check the output nodes and resolve cycles on them.
llvm-svn: 266258
A DISubprogram on x86_64 was 48 bytes. During an LTO build we
end up allocating *a lot* of these (see Duncan's numbers on
llvm-dev and/or my numbers in the review link).
This change reduces the size to 40 bytes, with a nice effect
on peak memory usage when LTO'ing clang.
There are more classes in the hierarchy which can be compacted
so more patches will come. DISubprogram was the biggest offender
in my profiling, anyway.
Differential Revision: http://reviews.llvm.org/D18918
llvm-svn: 266241
Raw function pointer collected by value
profile data may be from external functions
that are not instrumented. They won't have
mapping data to be used by the deserializer.
Force the value to be 0 in this case.
llvm-svn: 265890
Prevent the Metadata side-table in ValueMap from growing unnecessarily
when RF_NoModuleLevelChanges. As a drive-by, make ValueMap::hasMD,
which apparently had no users until I used it here for testing, actually
compile.
llvm-svn: 265828
Stop adding MDString to the Metadata section of the ValueMap in
MapMetadata. It blows up the size of the map for no benefit, since we
can always return quickly anyway.
There is a potential follow-up that I don't think I'll push on right
away, but maybe someone else is interested: stop checking for a
pre-mapped MDString, and move the `isa<MDString>()` checks in
Mapper::mapSimpleMetadata and MDNodeMapper::getMappedOp in front of the
`VM.getMappedMD()` calls. While this would preclude explicitly
remapping MDStrings it would probably be a little faster.
llvm-svn: 265827
This reverts commit r265765, reapplying r265759 after changing a call from
LocalAsMetadata::get to ValueAsMetadata::get (and adding a unit test). When a
local value is mapped to a constant (like "i32 %a" => "i32 7"), the new debug
intrinsic operand may no longer be pointing at a local.
http://lab.llvm.org:8080/green/job/clang-stage1-configure-RA_build/19020/
The previous coommit message follows:
--
This is a partial re-commit -- maybe more of a re-implementation -- of
r265631 (reverted in r265637).
This makes RF_IgnoreMissingLocals behave (almost) consistently between
the Value and the Metadata hierarchy. In particular:
- MapValue returns nullptr or "metadata !{}" for missing locals in
MetadataAsValue/LocalAsMetadata bridging paris, depending on
the RF_IgnoreMissingLocals flag.
- MapValue doesn't memoize LocalAsMetadata-related results.
- MapMetadata no longer deals with LocalAsMetadata or
RF_IgnoreMissingLocals at all. (This wasn't in r265631 at all, but
I realized during testing it would make the patch simpler with no
loss of generality.)
r265631 went too far, making both functions universally ignore
RF_IgnoreMissingLocals. This broke building (e.g.) compiler-rt.
Reassociate (and possibly other passes) don't currently maintain
dominates-use invariants for metadata operands, resulting in IR like
this:
define void @foo(i32 %arg) {
call void @llvm.some.intrinsic(metadata i32 %x)
%x = add i32 1, i32 %arg
}
If the inliner chooses to inline @foo into another function, then
RemapInstruction will call `MapValue(metadata i32 %x)` and assert that
the return is not nullptr.
I've filed PR27273 to add a Verifier check and fix the underlying
problem in the optimization passes.
As a workaround, return `!{}` instead of nullptr for unmapped
LocalAsMetadata when RF_IgnoreMissingLocals is unset. Otherwise, match
the behaviour of r265631.
Original commit message:
ValueMapper: Make LocalAsMetadata match function-local Values
Start treating LocalAsMetadata similarly to function-local members of
the Value hierarchy in MapValue and MapMetadata.
- Don't memoize them.
- Return nullptr if they are missing.
This also cleans up ConstantAsMetadata to stop listening to the
RF_IgnoreMissingLocals flag.
llvm-svn: 265768
This is a partial re-commit -- maybe more of a re-implementation -- of
r265631 (reverted in r265637).
This makes RF_IgnoreMissingLocals behave (almost) consistently between
the Value and the Metadata hierarchy. In particular:
- MapValue returns nullptr or "metadata !{}" for missing locals in
MetadataAsValue/LocalAsMetadata bridging paris, depending on
the RF_IgnoreMissingLocals flag.
- MapValue doesn't memoize LocalAsMetadata-related results.
- MapMetadata no longer deals with LocalAsMetadata or
RF_IgnoreMissingLocals at all. (This wasn't in r265631 at all, but
I realized during testing it would make the patch simpler with no
loss of generality.)
r265631 went too far, making both functions universally ignore
RF_IgnoreMissingLocals. This broke building (e.g.) compiler-rt.
Reassociate (and possibly other passes) don't currently maintain
dominates-use invariants for metadata operands, resulting in IR like
this:
define void @foo(i32 %arg) {
call void @llvm.some.intrinsic(metadata i32 %x)
%x = add i32 1, i32 %arg
}
If the inliner chooses to inline @foo into another function, then
RemapInstruction will call `MapValue(metadata i32 %x)` and assert that
the return is not nullptr.
I've filed PR27273 to add a Verifier check and fix the underlying
problem in the optimization passes.
As a workaround, return `!{}` instead of nullptr for unmapped
LocalAsMetadata when RF_IgnoreMissingLocals is unset. Otherwise, match
the behaviour of r265631.
Original commit message:
ValueMapper: Make LocalAsMetadata match function-local Values
Start treating LocalAsMetadata similarly to function-local members of
the Value hierarchy in MapValue and MapMetadata.
- Don't memoize them.
- Return nullptr if they are missing.
This also cleans up ConstantAsMetadata to stop listening to the
RF_IgnoreMissingLocals flag.
llvm-svn: 265759
Remove the assertion that disallowed the combination, since
RF_IgnoreMissingLocals should have no effect on globals. As it happens,
RF_NullMapMissingGlobalValues asserted in MapValue(Constant*,...), so I
also changed a cast to a cast_or_null to get my test passing.
llvm-svn: 265633
Start treating LocalAsMetadata similarly to function-local members of
the Value hierarchy in MapValue and MapMetadata.
- Don't memoize them.
- Return nullptr if they are missing.
This also cleans up ConstantAsMetadata to stop listening to the
RF_IgnoreMissingLocals flag.
llvm-svn: 265631
Summary:
In the context of http://wg21.link/lwg2445 C++ uses the concept of
'stronger' ordering but doesn't define it properly. This should be fixed
in C++17 barring a small question that's still open.
The code currently plays fast and loose with the AtomicOrdering
enum. Using an enum class is one step towards tightening things. I later
also want to tighten related enums, such as clang's
AtomicOrderingKind (which should be shared with LLVM as a 'C++ ABI'
enum).
This change touches a few lines of code which can be improved later, I'd
like to keep it as NFC for now as it's already quite complex. I have
related changes for clang.
As a follow-up I'll add:
bool operator<(AtomicOrdering, AtomicOrdering) = delete;
bool operator>(AtomicOrdering, AtomicOrdering) = delete;
bool operator<=(AtomicOrdering, AtomicOrdering) = delete;
bool operator>=(AtomicOrdering, AtomicOrdering) = delete;
This is separate so that clang and LLVM changes don't need to be in sync.
Reviewers: jyknight, reames
Subscribers: jyknight, llvm-commits
Differential Revision: http://reviews.llvm.org/D18775
llvm-svn: 265602
Instead of copying arguments from the source function to the
destination, steal them. This has a few advantages.
- The ValueMap doesn't need to be seeded with (or cleared of)
Arguments.
- Often the destination function won't have created any arguments yet,
so this avoids malloc traffic.
- Argument names don't need to be copied.
Because argument lists are lazy, this required a new
Function::stealArgumentListFrom helper.
llvm-svn: 265519
This commit completely rewrites Mapper::mapMetadata (the implementation
of llvm::MapMetadata) using an iterative algorithm. The guts of the new
algorithm are in MDNodeMapper::map, the entry function in a new class.
Previously, Mapper::mapMetadata performed a recursive exploration of the
graph with eager "just in case there's a reason" malloc traffic.
The new algorithm has these benefits:
- New nodes and temporaries are not created eagerly.
- Uniquing cycles are not duplicated (see new unit test).
- No recursion.
Given a node to map, it does this:
1. Use a worklist to perform a post-order traversal of the transitively
referenced unmapped nodes.
2. Track which nodes will change operands, and which will have new
addresses in the mapped scheme. Propagate the changes through the
POT until fixed point, to pick up uniquing cycles that need to
change.
3. Map all the distinct nodes without touching their operands. If
RF_MoveDistinctMetadata, they get mapped to themselves; otherwise,
they get mapped to clones.
4. Map the uniqued nodes (bottom-up), lazily creating temporaries for
forward references as needed.
5. Remap the operands of the distinct nodes.
Mehdi helped me out by profiling this with -flto=thin. On his workload
(importing/etc. for opt.cpp), MapMetadata sped up by 15%, contributed
about 50% less to persistent memory, and made about 100x fewer calls to
malloc. The speedup is less than I'd hoped. The profile mainly blames
DenseMap lookups; perhaps there's a way to reduce them (e.g., by
disallowing remapping of MDString).
It would be nice to break the strange remaining recursion on the Value
side: MapValue => materializeInitFor => RemapInstruction => MapValue. I
think we could do this by having materializeInitFor return a worklist of
things to be remapped.
llvm-svn: 265456
Some Include What You Use suggestions were used too.
Use anonymous namespaces in source files.
Differential revision: http://reviews.llvm.org/D18778
llvm-svn: 265454
destruction.
This makes the Expected<T> class behave like Error, even when in success mode.
Expected<T> values must be checked to see whether they contain an error prior
to being dereferenced, assigned to, or destructed.
llvm-svn: 265446
Summary:
A character within a string literal is not escaped correctly.
In this case, there is no semantic change because the invalid character turn out to be NUL anyway.
note: "\0x12" is equivalent to {0, 'x', '1', '2'} and not { 12 }.
This issue was found by clang-tidy.
Reviewers: rnk
Subscribers: cfe-commits
Differential Revision: http://reviews.llvm.org/D18747
llvm-svn: 265376
We were using array_pod_sort on an array of type 'Attribute', which
wraps a pointer to AttributeImpl. For the most part this didn't matter
because the printing code prints enum attributes in a defined order, but
integer attributes such as 'align' and 'dereferenceable' were not
ordered.
Furthermore, AttributeImpl::operator< was broken for integer attributes.
An integer attribute is a kind and an integer value, and both pieces
need to be compared.
By fixing the comparison operator, we can go back to std::sort, and
things look good now. This should fix clang arm-swiftcall.c test
failures on Windows.
llvm-svn: 265361
Support seeding a ValueMap with nullptr for Metadata entries, a
situation I didn't consider in the Metadata/Value split.
I added a ValueMapper::getMappedMD accessor that returns an
Optional<Metadata*> with the mapped (possibly null) metadata. IRMover
needs to use this to avoid modifying the map when it's checking for
unneeded subprograms. I updated a call from bugpoint since I find the
new code clearer.
llvm-svn: 265228
Provide a class to generate a SHA1 from a sequence of bytes, and
a convenience raw_ostream adaptor.
This will be used to provide a "build-id" by hashing the Module
block when writing bitcode. ThinLTO will use this information for
incremental build.
Reapply r265094 which was reverted in r265102 because it broke
MSVC bots (constexpr is not supported).
http://reviews.llvm.org/D16325
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 265107
This reverts commit r265096, r265095, and r265094.
Windows build is broken, and the validation does not pass.
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 265102
Provide a class to generate a SHA1 from a sequence of bytes, and
a convenience raw_ostream adaptor.
This will be used to provide a "build-id" by hashing the Module
block when writing bitcode. ThinLTO will use this information for
incremental build.
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 265094
This mostly cosmetic patch moves the DebugEmissionKind enum from DIBuilder
into DICompileUnit. DIBuilder is not the right place for this enum to live
in — a metadata consumer should not have to include DIBuilder.h.
I also added a Verifier check that checks that the emission kind of a
DICompileUnit is actually legal.
http://reviews.llvm.org/D18612
<rdar://problem/25427165>
llvm-svn: 265077
Commit r260791 contained an error in that it would introduce a cross-module
reference in the old module. It also introduced O(N^2) complexity in the
module cloner by requiring the entire module to be visited for each function.
Fix both of these problems by avoiding use of the CloneDebugInfoMetadata
function (which is only designed to do intra-module cloning) and cloning
function-attached metadata in the same way that we clone all other metadata.
Differential Revision: http://reviews.llvm.org/D18583
llvm-svn: 264935
There is code under review that requires StringMap to have a copy constructor,
and this makes StringMap more consistent with our other containers (like
DenseMap) that have copy constructors.
Differential Revision: http://reviews.llvm.org/D18506
llvm-svn: 264906
Using ArrayRef in annotateValueSite's parameter instead of using an array
and it's size.
Differential Revision: http://reviews.llvm.org/D18568
llvm-svn: 264879
Since we have moved to a model where functions are imported in bulk from
each source module after making summary-based importing decisions, there
is no longer a need to link metadata as a postpass, and all users have
been removed.
This essentially reverts r255909 and follow-on fixes.
llvm-svn: 264763
Function names in ObjC can have spaces in them. This interacts poorly
with name compression, which uses spaces to separate PGO names. Fix the
issue by using a different separator and update a test.
I chose "\01" as the separator because 1) it's non-printable, 2) we
strip it from PGO names, and 3) it's the next natural choice once "\00"
is discarded (that one's overloaded).
What's changed since the original commit?
- I fixed up the covmap-V2 binary format tests using a linux VM.
- I weakened the CHECK lines in instrprof-comdat.h to account for the
fact that there have been bugfixes to clang coverage. These will be
fixed up in a follow-up.
- I added an assert to make sure we don't get bitten by this again.
- I constructed the c-general.profraw file without name compression
enabled to appease some bots.
Differential Revision: http://reviews.llvm.org/D18516
llvm-svn: 264658
Explicitly check that artificial byte limit is rounded correctly by
exposing BitstreamReader::Size through a new accessor, getSizeIfKnown.
The original code for rounding (from r264547) wasn't obviously correct,
and even though r264623 cleaned it up (by calling llvm::alignTo) I think
it's worth testing.
llvm-svn: 264650
Function names in ObjC can have spaces in them. This interacts poorly
with name compression, which uses spaces to separate PGO names. Fix the
issue by using a different separator and update a test.
I chose "\01" as the separator because 1) it's non-printable, 2) we
strip it from PGO names, and 3) it's the next natural choice once "\00"
is discarded (that one's overloaded).
This reverts the revert commit beaf3d18. What's changed?
- I fixed up the covmap-V2 binary format tests using a linux VM.
- I updated the expected counts in instrprof-comdat.h to account for
the fact that there have been bugfixes to clang coverage.
- I added an assert to make sure we don't get bitten by this again.
Differential Revision: http://reviews.llvm.org/D18516
llvm-svn: 264641
Function names in ObjC can have spaces in them. This interacts poorly
with name compression, which uses spaces to separate PGO names. Fix the
issue by using a different separator and update a test.
I chose "\01" as the separator because 1) it's non-printable, 2) we
strip it from PGO names, and 3) it's the next natural choice once "\00"
is discarded (that one's overloaded).
Differential Revision: http://reviews.llvm.org/D18516
llvm-svn: 264587
When emitting coverage mappings for functions with local linkage and an
unknown filename, we use "<unknown>:func" for the PGO function name. The
problem is that we don't strip "<unknown>" from the name when loading
coverage data, like we do for other file names. Fix that and add a test.
llvm-svn: 264559
Split helper out of EmitRecordWithAbbrevImpl called emitBlob to reduce
code duplication, and add a few tests for it.
No functionality change intended.
llvm-svn: 264550
The implementation is fairly obvious. This is preparation for using
some blobs in bitcode.
For clarity (and perhaps future-proofing?), I moved the call to
JumpToBit in BitstreamCursor::readRecord ahead of calling
MemoryObject::getPointer, since JumpToBit can theoretically (a) read
bytes, which (b) invalidates the blob pointer.
This isn't strictly necessary the two memory objects we have:
- The return of RawMemoryObject::getPointer is valid until the memory
object is destroyed.
- StreamingMemoryObject::getPointer is valid until the next chunk is
read from the stream. Since the JumpToBit call is only going ahead
to a word boundary, we'll never load another chunk.
However, reordering makes it clear by inspection that the blob returned
by BitstreamCursor::readRecord will be valid.
I added some tests for StreamingMemoryObject::getPointer and
BitstreamCursor::readRecord.
llvm-svn: 264549
Change the filename to indicate this is a test, rename the tests, move
them into an anonymous namespace, and rename some variables. All to
match our usual style before making further changes.
llvm-svn: 264548
Allow users of SimpleBitstreamCursor to limit the number of bytes
available to the cursor. This is preparation for instantiating a cursor
that isn't allowed to load more bytes from a StreamingMemoryObject (just
move around the ones already-loaded).
llvm-svn: 264547
Add API to SimpleBitstreamCursor to allow users to translate between
byte addresses and pointers.
- jumpToPointer: move the bit position to a particular pointer.
- getPointerToByte: get the pointer for a particular byte.
- getPointerToBit: get the pointer for the byte of the current bit.
- getCurrentByteNo: convenience function for assertions and tests.
Mainly adds unit tests (getPointerToBit/Byte already has a use), but
also preparation for eventually using jumpToPointer.
llvm-svn: 264546
This makes us no longer relying on move-construction elision by the compiler.
Suggested by D. Blaikie.
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 264475
This helper method creates a pre-checked Error suitable for use as an out
parameter in a constructor. This avoids the need to have the constructor
check a known-good error before assigning to it.
llvm-svn: 264467
This is a recommit of r264414 after fixing the buildbot failure caused by
incompatible use of std::vector.erase().
The original message:
Add erase() which returns an iterator pointing to the next element after the
erased one. This makes it possible to erase selected elements while iterating
over the SetVector :
while (I != E)
if (test(*I))
I = SetVector.erase(I);
else
++I;
Reviewers: qcolombet, mcrosier, MatzeB, dblaikie
Subscribers: dberlin, dblaikie, mcrosier, llvm-commits
Differential Revision: http://reviews.llvm.org/D18281
llvm-svn: 264450
Summary:
Add erase() which returns an iterator pointing to the next element after the
erased one. This makes it possible to erase selected elements while iterating
over the SetVector :
while (I != E)
if (test(*I))
I = SetVector.erase(I);
else
++I;
Reviewers: qcolombet, mcrosier, MatzeB, dblaikie
Subscribers: dberlin, dblaikie, mcrosier, llvm-commits
Differential Revision: http://reviews.llvm.org/D18281
llvm-svn: 264414
Summary:
Loading IR with debug info improves MDString::get() from 19ms to 10ms.
This is a rework of D16597 with adding an "emplace" method on the StringMap
to avoid requiring the MDString move ctor to be public.
Reviewers: dexonsmith
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D17920
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 264386
Summary:
StringMap ctor accepts an initialize size, but expect it to be
rounded to the next power of 2. The ctor can handle that directly
instead of expecting clients to round it. Also, since the map will
resize itself when 75% full, take this into account an initialize
a larger initial size to avoid any growth.
Reviewers: dblaikie
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D18344
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 264385
Summary:
Just running the loop in the unittests for a few more iterations
(till 48) exhibit that the condition on the limit was not handled
properly in r263522.
Rewrite the test to use a class to count move/copies that happens
when inserting into the map.
Also take the opportunity to refactor the logic to compute the
number of buckets required for a given number of entries in the map.
Use this when constructing a DenseMap with a desired size given to
the constructor (and add a tests for this).
Reviewers: dblaikie
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D18345
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 264384
This is a temporary crutch to enable code that currently uses std::error_code
to be incrementally moved over to Error. Requiring all Error instances be
convertible enables clients to call errorToErrorCode on any error (not just
ECErrors created by conversion *from* an error_code).
This patch also moves code for Error from ErrorHandling.cpp into a new
Error.cpp file.
llvm-svn: 264221
The BumpPtrAllocator currently doesn't handle zero length allocations well.
The discussion for how to fix that is ongoing. However, there's no need
for StringRef::copy to actually allocate anything here anyway, so just
return StringRef() when we get a zero length copy.
Reviewed by David Blaikie
llvm-svn: 264201
MSVC as usual:
C:\Buildbot\Slave\llvm-clang-lld-x86_64-scei-ps4-windows10pro-fast\llvm.src\include\llvm/ADT/STLExtras.h(120):
error C2100: illegal indirection
C:\Buildbot\Slave\llvm-clang-lld-x86_64-scei-ps4-windows10pro-fast\llvm.src\include\llvm/IR/Instructions.h(3966):
note: see reference to class template instantiation
'llvm::mapped_iterator<llvm::User::op_iterator,llvm::CatchSwitchInst::DerefFnTy>'
being compiled
This reverts commit e091dd63f1f34e043748e28ad160d3bc17731168.
llvm-svn: 263760
idiom.
Most LLVM tool code exits immediately when an error is encountered and prints an
error message to stderr. The ExitOnError class supports this by providing two
call operators - one for Errors, and one for Expected<T>s. Calls to code that
can return Errors (or Expected<T>s) can use these calls to bail out on error,
and otherwise continue as if the operation had succeeded. E.g.
Error foo();
Expected<int> bar();
int main(int argc, char *argv[]) {
ExitOnError ExitOnErr;
ExitOnErr.setBanner(std::string("Error in ") + argv[0] + ":");
// Exit if foo returns an error. No need to manually check error return.
ExitOnErr(foo());
// Exit if bar returns an error, otherwise unwrap the contained int and
// continue.
int X = ExitOnErr(bar());
// ...
return 0;
}
llvm-svn: 263749
This patch introduces the Error classs for lightweight, structured,
recoverable error handling. It includes utilities for creating, manipulating
and handling errors. The scheme is similar to exceptions, in that errors are
described with user-defined types. Unlike exceptions however, errors are
represented as ordinary return types in the API (similar to the way
std::error_code is used).
For usage notes see the LLVM programmer's manual, and the Error.h header.
Usage examples can be found in unittests/Support/ErrorTest.cpp.
Many thanks to David Blaikie, Mehdi Amini, Kevin Enderby and others on the
llvm-dev and llvm-commits lists for lots of discussion and review.
llvm-svn: 263609
In some places, like InstCombine, we resize a DenseMap to fit the elements
we intend to put in it, then insert those elements (to avoid continual
reallocations as it grows). But .resize(foo) doesn't actually do what
people think; it resizes to foo buckets (which is really an
implementation detail the user of DenseMap probably shouldn't care about),
not the space required to fit foo elements. DenseMap grows if 3/4 of its
buckets are full, so this actually causes one forced reallocation every
time instead of avoiding a reallocation.
This patch makes .resize(foo) do the intuitive thing: it grows to the size
necessary to fit foo elements without new allocations.
Also include a test to verify that .resize() actually does what we think it
does.
llvm-svn: 263522
commit ae14bf6488e8441f0f6d74f00455555f6f3943ac
Author: Mehdi Amini <mehdi.amini@apple.com>
Date: Fri Mar 11 17:15:50 2016 +0000
Remove PreserveNames template parameter from IRBuilder
Summary:
Following r263086, we are now relying on a flag on the Context to
discard Value names in release builds.
Reviewers: chandlerc
Subscribers: mzolotukhin, llvm-commits
Differential Revision: http://reviews.llvm.org/D18023
From: Mehdi Amini <mehdi.amini@apple.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@263258
91177308-0d34-0410-b5e6-96231b3b80d8
until we can figure out what to do about clang and Release build testing.
This reverts commit 263258.
llvm-svn: 263321
Summary: As we now have unit-tests for UnrollAnalyzer, we can convert some existing tests to this format. It should make the tests more robust.
Reviewers: chandlerc, sanjoy
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D17904
llvm-svn: 263318
Summary:
Following r263086, we are now relying on a flag on the Context to
discard Value names in release builds.
Reviewers: chandlerc
Subscribers: mzolotukhin, llvm-commits
Differential Revision: http://reviews.llvm.org/D18023
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 263258
Added new string conversion wrappers that convert between `std::string` (of UTF-8 bytes) and `std::wstring`, which is particularly useful for Win32 interop. Also fixed a missing string conversion for `getenv` on Win32, using these new wrappers.
The motivation behind this is to provide the support functions required for LLDB to work properly on Windows with non-ASCII data; however, the functions are not LLDB specific.
Patch by cameron314
Differential Revision: http://reviews.llvm.org/D17549
llvm-svn: 263247
This was originally a pointer to support pass managers which didn't use
AnalysisManagers. However, that doesn't realistically come up much and
the complexity of supporting it doesn't really make sense.
In fact, *many* parts of the pass manager were just assuming the pointer
was never null already. This at least makes it much more explicit and
clear.
llvm-svn: 263219
clarify their purpose.
Firstly, call them "...Mixin" types so it is clear that there is no
type hierarchy being formed here. Secondly, use the term 'Info' to
clarify that they aren't adding any interesting *semantics* to the
passes or analyses, just exposing APIs used by the management layer to
get information about the pass or analysis.
Thanks to Manuel for helping pin down the naming confusion here and come
up with effective names to address it.
In case you already have some out-of-tree stuff, the following should be
roughly what you want to update:
perl -pi -e 's/\b(Pass|Analysis)Base\b/\1InfoMixin/g'
llvm-svn: 263217
work in the face of the limitations of DLLs and templated static
variables.
This requires passes that use the AnalysisBase mixin provide a static
variable themselves. So as to keep their APIs clean, I've made these
private and befriended the CRTP base class (which is the common
practice).
I've added documentation to AnalysisBase for why this is necessary and
at what point we can go back to the much simpler system.
This is clearly a better pattern than the extern template as it caught
*numerous* places where the template magic hadn't been applied and
things were "just working" but would eventually have broken
mysteriously.
llvm-svn: 263216
Without actually parsing a type it is difficult to perdict where
the type definition ends. In other words, instead of expecting
the user of the parser API to hand over only the relevant bits
of the string being parsed, take the whole string, parse the type,
and get back the number of characters that have been read.
This will be used by the MIR testing infrastructure.
llvm-svn: 262884
This is useful for MIR serialization. Indeed generic machine instructions
must have a type and we don't want to duplicate the logic in the MIParser.
llvm-svn: 262868
The ARM TargetParser would construct invalid StringRefs. This would cause
asserts to trigger. Add some tests in LLVM to ensure that we dont regress on
this in the future. Although there is a test for this in clang, this ensures
that the changes would get caught in the same repository.
llvm-svn: 262790
The RTDyldMemoryManager::getSymbolAddressInProcess method accepts a
linker-mangled symbol name, but it calls through to dlsym to do the lookup (via
DynamicLibrary::SearchForAddressOfSymbol), and dlsym expects an unmangled
symbol name.
Historically we've attempted to "demangle" by removing leading '_'s on all
platforms, and fallen back to an extra search if that failed. That's broken, as
it can cause symbols to resolve incorrectly on platforms that don't do mangling
if you query '_foo' and the process also happens to contain a 'foo'.
Fix this by demangling conditionally based on the host platform. That's safe
here because this function is specifically for symbols in the host process, so
the usual cross-process JIT looking concerns don't apply.
M unittests/ExecutionEngine/ExecutionEngineTest.cpp
M lib/ExecutionEngine/RuntimeDyld/RTDyldMemoryManager.cpp
llvm-svn: 262657
Summary: With discriminator, LineLocation can uniquely identify a callsite without the need to specifying callee name. Remove Callee function name from the key, and put it in the value (FunctionSamples).
Reviewers: davidxl, dnovillo
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D17827
llvm-svn: 262634
parts of the AA interface out of the base class of every single AA
result object.
Because this logic reformulates the query in terms of some other aspect
of the API, it would easily cause O(n^2) query patterns in alias
analysis. These could in turn be magnified further based on the number
of call arguments, and then further based on the number of AA queries
made for a particular call. This ended up causing problems for Rust that
were actually noticable enough to get a bug (PR26564) and probably other
places as well.
When originally re-working the AA infrastructure, the desire was to
regularize the pattern of refinement without losing any generality.
While I think it was successful, that is clearly proving to be too
costly. And the cost is needless: we gain no actual improvement for this
generality of making a direct query to tbaa actually be able to
re-use some other alias analysis's refinement logic for one of the other
APIs, or some such. In short, this is entirely wasted work.
To the extent possible, delegation to other API surfaces should be done
at the aggregation layer so that we can avoid re-walking the
aggregation. In fact, this significantly simplifies the logic as we no
longer need to smuggle the aggregation layer into each alias analysis
(or the TargetLibraryInfo into each alias analysis just so we can form
argument memory locations!).
However, we also have some delegation logic inside of BasicAA and some
of it even makes sense. When the delegation logic is baking in specific
knowledge of aliasing properties of the LLVM IR, as opposed to simply
reformulating the query to utilize a different alias analysis interface
entry point, it makes a lot of sense to restrict that logic to
a different layer such as BasicAA. So one aspect of the delegation that
was in every AA base class is that when we don't have operand bundles,
we re-use function AA results as a fallback for callsite alias results.
This relies on the IR properties of calls and functions w.r.t. aliasing,
and so seems a better fit to BasicAA. I've lifted the logic up to that
point where it seems to be a natural fit. This still does a bit of
redundant work (we query function attributes twice, once via the
callsite and once via the function AA query) but it is *exactly* twice
here, no more.
The end result is that all of the delegation logic is hoisted out of the
base class and into either the aggregation layer when it is a pure
retargeting to a different API surface, or into BasicAA when it relies
on the IR's aliasing properties. This should fix the quadratic query
pattern reported in PR26564, although I don't have a stand-alone test
case to reproduce it.
It also seems general goodness. Now the numerous AAs that don't need
target library info don't carry it around and depend on it. I think
I can even rip out the general access to the aggregation layer and only
expose that in BasicAA as it is the only place where we re-query in that
manner.
However, this is a non-trivial change to the AA infrastructure so I want
to get some additional eyes on this before it lands. Sadly, it can't
wait long because we should really cherry pick this into 3.8 if we're
going to go this route.
Differential Revision: http://reviews.llvm.org/D17329
llvm-svn: 262490
Summary:
This adds the beginning of an update API to preserve MemorySSA. In particular,
this patch adds a way to remove memory SSA accesses when instructions are
deleted.
It also adds relevant unit testing infrastructure for MemorySSA's API.
(There is an actual user of this API, i will make that diff dependent on this one. In practice, a ton of opt passes remove memory instructions, so it's hopefully an obviously useful API :P)
Reviewers: hfinkel, reames, george.burgess.iv
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D17157
llvm-svn: 262362
This adds support to convert ProfileSummary object to Metadata and create a
ProfileSummary object from metadata. This would allow attaching profile summary
information to Module allowing optimization passes to use it.
llvm-svn: 262360
analyses in the new pass manager.
These just handle really basic stuff: turning a type name into a string
statically that is nice to print in logs, and getting a static unique ID
for each analysis.
Sadly, the format of passes in anonymous namespaces makes using their
names in tests really annoying so I've customized the names of the no-op
passes to keep tests sane to read.
This is the first of a few simplifying refactorings for the new pass
manager that should reduce boilerplate and confusion.
llvm-svn: 262004
Summary: Check that we're using SCEV for the same loop we're simulating. Otherwise, we might try to use the iteration number of the current loop in SCEV expressions for inner/outer loops IVs, which is clearly incorrect.
Reviewers: chandlerc, hfinkel
Subscribers: sanjoy, llvm-commits, mzolotukhin
Differential Revision: http://reviews.llvm.org/D17632
llvm-svn: 261958
This creates the new-style LoopPassManager and wires it up with dummy
and print passes.
This version doesn't support modifying the loop nest at all. It will
be far easier to discuss and evaluate the approaches to that with this
in place so that the boilerplate is out of the way.
llvm-svn: 261831
This extracts the type name from __PRETTY_FUNCTION__ for compilers that
support it (I've opted Clang, GCC, and ICC into this as I've tested that
they work) and from __FUNCSIG__ which is very similar on MSVC. The
routine falls back gracefully on a stub "UNKNOWN_TYPE" string with
compilers or formats it doesn't understand.
This should be enough for a lot of common cases in LLVM where the real
goal is just to log or print a type name as a debugging aid, and save
a ton of boilerplate in the process. Notably, I'm planning to use this
to remove all the getName() boiler plate from the new pass manager.
The design and implementation is based on a bunch of advice and
discussion with Richard Smith and experimenting with most versions of
Clang and GCC. David Majnemer also provided excellent advice on how best
to do this with MSVC. Richard also checked that ICC does something
reasonable and I'll watch the build bots for other compilers. It'd be
great if someone could contribute logic for xlC and/or other toolchains.
Differential Revision: http://reviews.llvm.org/D17565
llvm-svn: 261819
pattern that triggers it. This essentially requires an immutable
function analysis, as that will survive anything we do to invalidate it.
When we have such patterns, the function analysis manager will not get
cleared between runs of the proxy.
If we actually need an assert about how things are queried, we can add
more elaborate machinery for computing it, but so far I'm not aware of
significant value provided.
Thanks to Justin Lebar for noticing this when he made a (seemingly
innocuous) change to FunctionAttrs that is enough to trigger it in one
test there. Now it is covered by a direct test of the pass manager code.
llvm-svn: 261627
system.
Previously, this was only being tested with larger integration tests.
That makes it hard to isolated specific issues with it, and makes the
APIs themselves less well tested. Add a unittest based around the same
patterns used for testing the general pass manager.
llvm-svn: 261624
Rename makeNoWrapRegion to a more obvious makeGuaranteedNoWrapRegion,
and add a comment about the counter-intuitive aspects of the function.
This is to help prevent cases like PR26628.
llvm-svn: 261532
Before this patch simplified SCEV expressions for PHI nodes were only returned
the very first time getSCEV() was called, but later calls to getSCEV always
returned the non-simplified value, which had "temporarily" been stored in the
ValueExprMap, but was never removed and consequently blocked the caching of the
simplified PHI expression.
llvm-svn: 261485
it to actually test the new pass manager AA wiring.
This patch was extracted from the (somewhat too large) D12357 and
rebosed on top of the slightly different design of the new pass manager
AA wiring that I just landed. With this we can start testing the AA in
a thorough way with the new pass manager.
Some minor cleanups to the code in the pass was necessitated here, but
otherwise it is a very minimal change.
Differential Revision: http://reviews.llvm.org/D17372
llvm-svn: 261403
analysis passes, support pre-registering analyses, and use that to
implement parsing and pre-registering a custom alias analysis pipeline.
With this its possible to configure the particular alias analysis
pipeline used by the AAManager from the commandline of opt. I've updated
the test to show this effectively in use to build a pipeline including
basic-aa as part of it.
My big question for reviewers are around the APIs that are used to
expose this functionality. Are folks happy with pass-by-lambda to do
pass registration? Are folks happy with pre-registering analyses as
a way to inject customized instances of an analysis while still using
the registry for the general case?
Other thoughts of course welcome. The next round of patches will be to
add the rest of the alias analyses into the new pass manager and wire
them up here so that they can be used from opt. This will require
extending the (somewhate limited) functionality of AAManager w.r.t.
module passes.
Differential Revision: http://reviews.llvm.org/D17259
llvm-svn: 261197
The commit breaks stage2 compilation on PowerPC. Reverting for now while
this is analyzed. I also have to revert the LiveIntervalTest for now as
that depends on this commit.
Revert "LiveIntervalAnalysis: Remove LiveVariables requirement"
This reverts commit r260806.
Revert "Remove an unnecessary std::move to fix -Wpessimizing-move warning."
This reverts commit r260931.
Revert "Fix typo in LiveIntervalTest"
This reverts commit r260907.
Revert "Add unittest for LiveIntervalAnalysis::handleMove()"
This reverts commit r260905.
llvm-svn: 261189
Modify ProfileSummary class to make it not instrumented profile specific.
Add a new InstrumentedProfileSummary class that inherits from ProfileSummary.
Differential Revision: http://reviews.llvm.org/D17310
llvm-svn: 261119
reference-edge SCCs.
This essentially builds a more normal call graph as a subgraph of the
"reference graph" that was the old model. This allows both to exist and
the different use cases to use the aspect which addresses their needs.
Specifically, the pass manager and other *ordering* constrained logic
can use the reference graph to achieve conservative order of visit,
while analyses reasoning about attributes and other properties derived
from reachability can reason about the direct call graph.
Note that this isn't necessarily complete: it doesn't model edges to
declarations or indirect calls. Those can be found by scanning the
instructions of the function if desirable, and in fact every user
currently does this in order to handle things like calls to instrinsics.
If useful, we could consider caching this information in the call graph
to save the instruction scans, but currently that doesn't seem to be
important.
An important realization for why the representation chosen here works is
that the call graph is a formal subset of the reference graph and thus
both can live within the same data structure. All SCCs of the call graph
are necessarily contained within an SCC of the reference graph, etc.
The design is to build 'RefSCC's to model SCCs of the reference graph,
and then within them more literal SCCs for the call graph.
The formation of actual call edge SCCs is not done lazily, unlike
reference edge 'RefSCC's. Instead, once a reference SCC is formed, it
directly builds the call SCCs within it and stores them in a post-order
sequence. This is used to provide a consistent platform for mutation and
update of the graph. The post-order also allows for very efficient
updates in common cases by bounding the number of nodes (and thus edges)
considered.
There is considerable common code that I'm still looking for the best
way to factor out between the various DFS implementations here. So far,
my attempts have made the code harder to read and understand despite
reducing the duplication, which seems a poor tradeoff. I've not given up
on figuring out the right way to do this, but I wanted to wait until
I at least had the system working and tested to continue attempting to
factor it differently.
This also requires introducing several new algorithms in order to handle
all of the incremental update scenarios for the more complex structure
involving two edge colorings. I've tried to comment the algorithms
sufficiently to make it clear how this is expected to work, but they may
still need more extensive documentation.
I know that there are some changes which are not strictly necessarily
coupled here. The process of developing this started out with a very
focused set of changes for the new structure of the graph and
algorithms, but subsequent changes to bring the APIs and code into
consistent and understandable patterns also ended up touching on other
aspects. There was no good way to separate these out without causing
*massive* merge conflicts. Ultimately, to a large degree this is
a rewrite of most of the core algorithms in the LCG class and so I don't
think it really matters much.
Many thanks to the careful review by Sanjoy Das!
Differential Revision: http://reviews.llvm.org/D16802
llvm-svn: 261040
Add support for trimming a single kind of character from a StringRef.
This makes the common case of trimming null bytes much neater. It's also
probably a bit speedier too, since it avoids creating a std::bitset in
find_{first,last}_not_of.
llvm-svn: 260925
Summary:
Export the CloneDebugInfoMetadata utility, which clones all debug info
associated with a function into the first module. Also use this function
in CloneModule on each function we clone (the CloneFunction entrypoint
already does this).
Without this, cloning a module will lead to DI quality regressions,
especially since r252219 reversed the Function <-> DISubprogram edge
(before we could get lucky and have this edge preserved if the
DISubprogram itself was, e.g. due to location metadata).
This was verified to fix missing debug information in julia and
a unittest to verify the new behavior is included.
Patch by Yichao Yu! Thanks!
Reviewers: loladiro, pcc
Differential Revision: http://reviews.llvm.org/D17165
llvm-svn: 260791
As support expands to more runtimes, we'll need to
distinguish between more than just HSA and unknown.
This also lets us stop using unknown everywhere.
llvm-svn: 260790
Add another interface to function annotateValueSite() which directly uses the
VauleData array.
Differential Revision: http://reviews.llvm.org/D17108
llvm-svn: 260741
The patch adds a parameter in annotateValueSite() to control the max number
of records written to the value profile meta data for each value site. The
default is kept as the current value of 3.
Differential Revision: http://reviews.llvm.org/D17084
llvm-svn: 260450
Patch by Rong Xu
The problem is exposed by intra-module indirect call promotion where
prof symtab is created from module which does not contain all symbols
from the program. With partial symtab, the result needs to be checked
more strictly.
llvm-svn: 260361
This patch adds a new class, OrcI386, which contains the hooks needed to
support lazy-JITing on i386 (currently only for Pentium 2 or above, as the JIT
re-entry code uses the FXSAVE/FXRSTOR instructions).
Support for i386 is enabled in the LLI lazy JIT and the Orc C API, and
regression and unit tests are enabled for this architecture.
llvm-svn: 260338
This pass implements whole program optimization of virtual calls in cases
where we know (via bitset information) that the list of callees is fixed. This
includes the following:
- Single implementation devirtualization: if a virtual call has a single
possible callee, replace all calls with a direct call to that callee.
- Virtual constant propagation: if the virtual function's return type is an
integer <=64 bits and all possible callees are readnone, for each class and
each list of constant arguments: evaluate the function, store the return
value alongside the virtual table, and rewrite each virtual call as a load
from the virtual table.
- Uniform return value optimization: if the conditions for virtual constant
propagation hold and each function returns the same constant value, replace
each virtual call with that constant.
- Unique return value optimization for i1 return values: if the conditions
for virtual constant propagation hold and a single vtable's function
returns 0, or a single vtable's function returns 1, replace each virtual
call with a comparison of the vptr against that vtable's address.
Differential Revision: http://reviews.llvm.org/D16795
llvm-svn: 260312
compiler-specific issues. Instead, repeat an 'operator delete' definition in
each derived class that is actually deleted, and give up on the static type
safety of an error when sized delete is accidentally used on a type derived
from TrailingObjects.
llvm-svn: 260190
This fixes undefined behavior in C++14 due to the size of the object being
deleted being different from sizeof(dynamic type) when it is allocated with
trailing objects.
MSVC seems to have several bugs around using-declarations changing the access
of a member inherited from a base class, so use forwarding functions instead of
using-declarations to make TrailingObjects::operator delete accessible where
desired.
llvm-svn: 260180
Summary:
Unrolling Analyzer is already pretty complicated, and it becomes harder and harder to exercise it with usual IR tests, as with them we can only check the final decision: whether the loop is unrolled or not. This change factors this framework out from LoopUnrollPass to analyses, which allows to use unit tests.
The change itself is supposed to be NFC, except adding a couple of tests.
I plan to add more tests as I add new functionality and find/fix bugs.
Reviewers: chandlerc, hfinkel, sanjoy
Subscribers: zzheng, sanjoy, llvm-commits
Differential Revision: http://reviews.llvm.org/D16623
llvm-svn: 260169
The Windows bots have been failing for the last two days, with:
FAILED: C:\PROGRA~2\MICROS~1.0\VC\bin\amd64\cl.exe -c LLVMContextImpl.cpp
D:\buildslave\clang-x64-ninja-win7\llvm\lib\IR\LLVMContextImpl.cpp(137) :
error C2248: 'llvm::TrailingObjects<llvm::AttributeSetImpl,
llvm::IndexAttrPair>::operator delete' :
cannot access private member declared in class 'llvm::AttributeSetImpl'
TrailingObjects.h(298) : see declaration of
'llvm::TrailingObjects<llvm::AttributeSetImpl,
llvm::IndexAttrPair>::operator delete'
AttributeImpl.h(213) : see declaration of 'llvm::AttributeSetImpl'
llvm-svn: 260053
-fsized-deallocation. Disable sized deallocation for all objects derived from
TrailingObjects, as we expect the storage allocated for these objects to be
larger than the size of their dynamic type.
llvm-svn: 259942
Unfortunately, ProgramInfo::ProcessId is signed on Unix and unsigned on
Windows, breaking the standard fix of using '0U' in the gtest
expectation.
llvm-svn: 259704
With this patch, the profile summary data will be available in indexed
profile data file so that profiler reader/compiler optimizer can start
to make use of.
Differential Revision: http://reviews.llvm.org/D16258
llvm-svn: 259626
differentiate between indirect references to functions an direct calls.
This doesn't do a whole lot yet other than change the print out produced
by the analysis, but it lays the groundwork for a very major change I'm
working on next: teaching the call graph to actually be a call graph,
modeling *both* the indirect reference graph and the call graph
simultaneously. More details on that in the next patch though.
The rest of this is essentially a bunch of over-engineering that won't
be interesting until the next patch. But this also isolates essentially
all of the churn necessary to introduce the edge abstraction from the
very important behavior change necessary in order to separately model
the two graphs. So it should make review of the subsequent patch a bit
easier at the cost of making this patch seem poorly motivated. ;]
Differential Revision: http://reviews.llvm.org/D16038
llvm-svn: 259463
With poorly chosen custom parameters, the line table encoding logic would
sometimes end up generating a special opcode bigger than 255, which is wrong.
The set of default parameters that LLVM uses isn't subject to this bug.
When carefully chosing the line table parameters, it's impossible to fall into the
corner case that this patch fixes. The standard however doesn't require that these
parameters be carefully chosen. And even if it did, we shouldn't generate broken
encoding.
Add a unittest for this specific encoding bug, and while at it, create some unit
tests for the encoding logic using different sets of parameters.
llvm-svn: 259334
Add an option to llvm-profdata merge for writing out sparse indexed
profiles. These profiles omit InstrProfRecords for functions which are
never executed.
Differential Revision: http://reviews.llvm.org/D16727
llvm-svn: 259258
This reverts commit r259117.
The LineInfo constructor is defined in the codeview library and we have
to link against it now. Doing that isn't trivial, so reverting for now.
llvm-svn: 259126
Adds a new family of .cv_* directives to LLVM's variant of GAS syntax:
- .cv_file: Similar to DWARF .file directives
- .cv_loc: Similar to the DWARF .loc directive, but starts with a
function id. CodeView line tables are emitted by function instead of
by compilation unit, so we needed an extra field to communicate this.
Rather than overloading the .loc direction further, we decided it was
better to have our own directive.
- .cv_stringtable: Emits the codeview string table at the current
position. Currently this just contains the filenames as
null-terminated strings.
- .cv_filechecksums: Emits the file checksum table for all files used
with .cv_file so far. There is currently no support for emitting
actual checksums, just filenames.
This moves the line table emission code down into the assembler. This
is in preparation for implementing the inlined call site line table
format. The inline line table format encoding algorithm requires knowing
the absolute code offsets, so it must run after the assembler has laid
out the code.
David Majnemer collaborated on this patch.
llvm-svn: 259117
at least as big as the mach header to be identified as a Mach-O file and
make sure smaller files are not identified as a Mach-O files but as
unknown files. Also fix identify_magic() so it looks at all 4 bytes of
the filetype field when determining the type of the Mach-O file.
Then fix the macho-invalid-header test case to check that it is an
unknown file and make sure it does not get the error for
object_error::parse_failed. And also update the unit tests.
llvm-svn: 258883
Summary:
This patch is provided in preparation for removing autoconf on 1/26. The proposal to remove autoconf on 1/26 was discussed on the llvm-dev thread here: http://lists.llvm.org/pipermail/llvm-dev/2016-January/093875.html
"I felt a great disturbance in the [build system], as if millions of [makefiles] suddenly cried out in terror and were suddenly silenced. I fear something [amazing] has happened."
- Obi Wan Kenobi
Reviewers: chandlerc, grosbach, bob.wilson, tstellarAMD, echristo, whitequark
Subscribers: chfast, simoncook, emaste, jholewinski, tberghammer, jfb, danalbert, srhines, arsenm, dschuff, jyknight, dsanders, joker.eph, llvm-commits
Differential Revision: http://reviews.llvm.org/D16471
llvm-svn: 258861
Summary:
Update ObjectTransformLayer::addObjectSet to take the object set by
value rather than reference and pass it to the base layer with move
semantics rather than copy, to match r258185's changes to
ObjectLinkingLayer.
Update the unit test to verify that ObjectTransformLayer's signature stays
in sync with ObjectLinkingLayer's.
Reviewers: lhames
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D16414
llvm-svn: 258630
Using an array instead of ArrayRef would allow type inference, but
(short of using C99) one would still need to write
typedef uint16_t VT[];
LE.write(VT{0x1234, 0x5678});
llvm-svn: 258535
they're needed.
Prior to this patch objects were loaded (via RuntimeDyld::loadObject) when they
were added to the ObjectLinkingLayer, but were not relocated and finalized until
a symbol address was requested. In the interim, another object could be loaded
and finalized with the same memory manager, causing relocation/finalization of
the first object to fail (as the first finalization call may have marked the
allocated memory for the first object read-only).
By deferring the loadObject call (and subsequent memory allocations) until an
object file is needed we can avoid prematurely finalizing memory.
llvm-svn: 258185
Previously these were Darwin-only. Since the switch to direct binary emission
of stubs, trampolines and resolver blocks, these should work on other *nix
platforms too.
These tests can be enabled on Windows once known issues with ORC's handling of
Windows symbol mangling (see e.g. https://llvm.org/PR25940) have been fixed.
llvm-svn: 258031
Summary:
Simplify the memory management of mock IR in test AlterInvokeBundles.
Reviewers: dblaikie
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D16211
llvm-svn: 257892
Summary:
Before this the Verifier didn't complain if the GlobalVariable
referenced from a DIGlobalVariable was not in fact in the correct
module (it would crash while writing bitcode though). Fix this by
always checking parantage of GlobalValues while walking constant
expressions and changing the DIGlobalVariable visitor to also
visit the constant it contains.
Reviewers: rafael
Differential Revision: http://reviews.llvm.org/D16059
llvm-svn: 257825
Summary:
We already have the inverse verification that we only use globals
that are defined in this module. This essentially catches the
same mistake, but when verifying the module that contains the
definition.
Reviewers: rafael
Differential Revision: http://reviews.llvm.org/D15272
llvm-svn: 257823
Summary:
The overloads of CallInst::Create and InvokeInst::Create that are used to
adjust operand bundles purport to create a new instruction "identical in
every way except [for] the operand bundles", so copy the DebugLoc along
with everything else.
Reviewers: sanjoy, majnemer
Subscribers: majnemer, dblaikie, llvm-commits
Differential Revision: http://reviews.llvm.org/D16157
llvm-svn: 257745
Summary:
The problem here is that an enum class can not be implicitly converted to an
integer. That assumption snuck back into PointerIntPair. This commit fixes the
issue and more importantly adds some unittests to make sure that we do not break
this again.
rdar://23594806
Reviewers: gribozavr
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D16131
llvm-svn: 257574
Summary: Add SaturatingMultiplyAdd convenience function template since A + (X * Y) comes up frequently when doing weighted arithmetic.
Reviewers: davidxl, silvas
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D15385
llvm-svn: 257532
This patch adds utilities to ORC for managing a remote JIT target. It consists
of:
1. A very primitive RPC system for making calls over a byte-stream. See
RPCChannel.h, RPCUtils.h.
2. An RPC API defined in the above system for managing memory, looking up
symbols, creating stubs, etc. on a remote target. See OrcRemoteTargetRPCAPI.h.
3. An interface for creating high-level JIT components (memory managers,
callback managers, stub managers, etc.) that operate over the RPC API. See
OrcRemoteTargetClient.h.
4. A helper class for building servers that can handle the RPC calls. See
OrcRemoteTargetServer.h.
The system is designed to work neatly with the existing ORC components and
functionality. In particular, the ORC callback API (and consequently the
CompileOnDemandLayer) is supported, enabling lazy compilation of remote code.
Assuming this doesn't trigger any builder failures, a follow-up patch will be
committed which tests these utilities by using them to replace LLI's existing
remote-JITing demo code.
llvm-svn: 257305
RuntimeDyld::MemoryManager.
The RuntimeDyld::MemoryManager::reserveAllocationSpace method is called when
object files are loaded, and gives clients a chance to pre-allocate memory for
all segments. Previously only the size of each segment (code, ro-data, rw-data)
was supplied but not the alignment. This hasn't caused any problems so far, as
most clients allocate via the MemoryBlock interface which returns page-aligned
blocks. Adding alignment arguments enables finer grained allocation while still
satisfying alignment restrictions.
llvm-svn: 257294
llvm\unittests\ExecutionEngine\Orc\ObjectLinkingLayerTest.cpp(115) : error C2327: 'llvm::OrcExecutionTest::TM' : is not a type name, static, or enumerator
llvm\unittests\ExecutionEngine\Orc\ObjectLinkingLayerTest.cpp(115) : error C2065: 'TM' : undeclared identifier
FYI, "this->TM" was valid even before moving class SectionMemoryManagerWrapper.
llvm-svn: 257290
type.
This makes it easy and safe to use a set of flags as one elmenet of
a tagged union with pointers. There is quite a bit of code that has
historically done this by casting arbitrary integers to "pointers" and
assuming that this was safe and reliable. It is neither, and has started
to rear its head by triggering safety asserts in various abstractions
like PointerLikeTypeTraits when the integers chosen are invariably poor
choices for *some* platform and *some* situation. Not to mention the
(hopefully unlikely) prospect of one of these integers actually getting
allocated!
With this, it will be straightforward to build type safe abstractions
like this without being error prone. The abstraction itself is also
remarkably simple thanks to the implicit conversion.
This use case and pattern was also independently created by the folks
working on Swift, and they're going to incrementally add any missing
functionality they find.
Differential Revision: http://reviews.llvm.org/D15844
llvm-svn: 257284
This is a much more general and powerful form of PointerUnion. It
provides a reasonably complete sum type (from type theory) for
pointer-like types. It has several significant advantages over the
existing PointerUnion infrastructure:
1) It allows more than two pointer types to participate without awkward
nesting structures.
2) It directly exposes the tag so that it is convenient to write
switches over the possible members.
3) It can re-use the same type for multiple tag values, something that
has been worked around by either abusing PointerIntPair or defining
nonce types and doing unsafe pointer casting.
4) It supports customization of the PointerLikeTypeTraits used for
specific member types. This means it could (in theory) be used even
with types that are over-aligned on allocation to expose larger
numbers of bits to the tag.
All in all, I think it is at least complimentary to the existing
infrastructure, and a strict improvement for some use cases.
Differential Revision: http://reviews.llvm.org/D15843
llvm-svn: 257282
managers.
Prior to this patch, recursive finalization (where finalization of one
RuntimeDyld instance triggers finalization of another instance on which the
first depends) could trigger memory access failures: When the inner (dependent)
RuntimeDyld instance and its memory manager are finalized, memory allocated
(but not yet relocated) by the outer instance is locked, and relocation in the
outer instance fails with a memory access error.
This patch adds a latch to the RuntimeDyld::MemoryManager base class that is
checked by a new method: RuntimeDyld::finalizeWithMemoryManagerLocking, ensuring
that shared memory managers are only finalized by the outermost RuntimeDyld
instance.
This allows ORC clients to supply the same memory manager to multiple calls to
addModuleSet. In particular it enables the use of user-supplied memory managers
with the CompileOnDemandLayer which must reuse the supplied memory manager for
each function that is lazily compiled.
llvm-svn: 257263
Done in InstrProfWriter to eliminate the need for client
code to do the sorting. The operation is done once and reused
many times so it is more efficient. Update unit test to remove
sorting. Also update expected output of affected tests.
llvm-svn: 257145
For a new record with weight != 1, only edge profiling
counters are scaled, VP data is not properly scaled.
This patch refactors the code and fixes the problem.
Also added sort by count interface (for follow up patch).
llvm-svn: 257143
Fix PR24852 (crash with -debug -instcombine)
Patch by Than McIntosh <thanm@google.com>
Summary:
Add guards to the asm writer to prevent crashing
when dumping an instruction that has no basic
block.
Differential Revision: http://reviews.llvm.org/D15798
From: Than McIntosh <thanm@google.com>
llvm-svn: 257094
This adds a unittest for the support added in r256648 to add
a flag that can be used to prevent RAUW on temporary metadata
used as a map key.
llvm-svn: 256938
...and mark it as merely an input_iterator rather than a forward_iterator,
since it is destructive. And then rewrite == to take advantage of that.
Patch by Alex Denisov!
llvm-svn: 256913
Summary:
There are a number of files in the tree which have been accidentally checked in with DOS line endings. Convert these to native line endings.
There are also a few files which have DOS line endings on purpose, and I have set the svn:eol-style property to 'CRLF' on those.
Reviewers: joerg, aaron.ballman
Subscribers: aaron.ballman, sanjoy, dsanders, llvm-commits
Differential Revision: http://reviews.llvm.org/D15848
llvm-svn: 256707
This is part of the effort/prepration to reduce the size
instr-pgo (object, binary, memory footprint, and raw data).
The functionality is currently off by default and not yet
used by any clients.
llvm-svn: 256667
This is necessary to use them as part of pointer traits and is generally
useful. I've added unit test coverage to isolate and ensure this works
correctly.
I'll watch the build bots to try to see if any compilers can't tolerate
this bit of magic (and much credit goes to Richard Smith for coming up
with this magical production!) but give a shout if you see issues.
llvm-svn: 256553
Previously, the code enforced non-decreasing alignment of each trailing
type. However, it's easy enough to allow for realignment as needed, and
thus avoid the developer having to think about the possiblilities for
alignment requirements on all architectures.
(E.g. on Linux/x86, a struct with an int64 member is 4-byte aligned,
while on other 32-bit archs -- and even with other OSes on x86 -- it has
8-byte alignment. This sort of thing is irritating to have to manually
deal with.)
llvm-svn: 256533
We didn't actually statically check this, and so it worked 25% of the
time for me. =/ Really sorry it took so long to fix, I shouldn't leave
the commit log editor window open without saving and landing the commit.
=[
llvm-svn: 256528
MSC18 Debug didn't merge them.
FIXME: I tweaked just to appease a builder. Almost string literals should be addressed identically there.
llvm-svn: 256459
Summary:
We need to actually remove the use of the personality function,
otherwise we can run into trouble if we want to e.g. delete
the personality function because ther's no way to get rid of
its uses. Do this by resetting to ConstantPointerNull value
that the operands are set to when first allocated.
Reviewers: vsk, dexonsmith
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D15752
llvm-svn: 256345
Creator and lookup interfaces are added to this symtab class.
The new interfaces will be used by InstrProf Readers and writer.
A unit test is also added for the new APIs.
llvm-svn: 256092
Remove all checks that required main thread to run faster than tasks in
ThreadPool, and yields which are now unnecessary. This should fix some
bot failures.
llvm-svn: 256056
- Automatic alignment of the base type for the alignment requirements
of the trailing types.
- Support for an arbitrary numbers of trailing types, instead of only
1 or 2, by using a variadic template implementation.
Upcoming commits to clang will take advantage of both of these features.
Differential Revision: http://reviews.llvm.org/D12439
llvm-svn: 256054
Type specific declarations have been moved to Type.h and error handling
routines have been moved to ErrorHandling.h. Both are included in Core.h
so nothing should change for projects directly including the headers,
but transitive dependencies may be affected.
llvm-svn: 255965
The current BranchProbability::normalizeProbabilities() forbids known and
unknown probabilities to coexist in the list. This was once used to help
capture probability exceptions but has caused some reported build
failures (https://llvm.org/bugs/show_bug.cgi?id=25838).
This patch removes this restriction by evenly distributing the complement
of the sum of all known probabilities to unknown ones. We could still
treat this as an abnormal behavior, but it is better to emit warnings in
our future profile validator.
Differential revision: http://reviews.llvm.org/D15548
llvm-svn: 255934
Summary: Surface counter overflow when merging profile data. Merging still occurs on overflow but counts saturate to the maximum representable value. Overflow is reported to the user.
Reviewers: davidxl, dnovillo, silvas
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D15547
llvm-svn: 255825
Summary:
This change adds support for specifying a weight when merging profile data with the llvm-profdata tool.
Weights are specified by using the --weighted-input=<weight>,<filename> option. Input files not specified
with this option (normal positional list after options) are given a default weight of 1.
Adding support for arbitrary weighting of input profile data allows for relative importance to be placed on the
input data from multiple training runs.
Both sampled and instrumented profiles are supported.
Reviewers: davidxl, dnovillo, bogner, silvas
Subscribers: silvas, davidxl, llvm-commits
Differential Revision: http://reviews.llvm.org/D15306
llvm-svn: 255659
Ahmed Bougacha