Previously we would dump the names of enum types, but not their
enumerator values. This adds support for enumerator values. In
doing so, we have to introduce a general purpose mechanism for
caching symbol indices of field list members. Unlike global
types, FieldList members do not have a TypeIndex. So instead,
we identify them by the pair {TypeIndexOfFieldList, IndexInFieldList}.
llvm-svn: 342415
Summary: This will be useful to generate many configurations and test instruction regimes (NaN, Inf, subnormal, normal).
Reviewers: courbet
Subscribers: mgorny, tschuett, llvm-commits
Differential Revision: https://reviews.llvm.org/D51858
llvm-svn: 342369
The original was reverted due to an apparent build-bot test failure,
but it looks like this is just a flaky test.
Also added a C-interface function for large values, and updated
llvm-lto's --thinlto-cache-max-size-bytes switch to take a type larger
than int.
The maximum cache size in terms of bytes is a 64-bit number. However,
the methods to set it only took unsigned previously, which meant that
the maximum cache size could not be specified above 4GB. That's quite
small compared to the output of some projects, so it makes sense to
provide the ability to set larger values in that field.
We also needed a C-interface function that provides a greater range
than the existing thinlto_codegen_set_cache_size_bytes, which also only
takes an unsigned, so this change also adds
hinlto_codegen_set_cache_size_megabytes.
Reviewed by: mehdi_amini, tejohnson, steven_wu
Differential Revision: https://reviews.llvm.org/D52023
llvm-svn: 342366
This diff adds -S as an alias for --strip-all-gnu
(for compatibility with binutils' objcopy).
Patch by Dmitry Golovin!
Test plan: make check-all
Differential revision: https://reviews.llvm.org/D52163
llvm-svn: 342364
For people who use llvm-readelf as a replacement of GNU readelf, they would like to see -d -r ... listed in llvm-readelf -help. It also helps understanding the confusing -s (which is unfortunately different in semantics).
Reviewers: phosek, ruiu, echristo
Reviewed By: ruiu, echristo
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D52129
llvm-svn: 342339
Naively computing the hash after the PDB data has been generated is in practice
as fast as other approaches I tried. I also tried online-computing the hash as
parts of the PDB were written out (https://reviews.llvm.org/D51887; that's also
where all the measuring data is) and computing the hash in parallel
(https://reviews.llvm.org/D51957). This approach here is simplest, without
being slower.
Differential Revision: https://reviews.llvm.org/D51956
llvm-svn: 342333
Currently if we got something like `const Foo` we'd ignore it and
just rely on printing the unmodified `Foo` later on. However,
for testing the native reading code we really would like to be able
to see these so that we can verify that the native reader can
actually handle them. Instead of printing out the full type though,
just print out the header.
llvm-svn: 342295
Also added a C-interface function for large values, and updated
llvm-lto's --thinlto-cache-max-size-bytes switch to take a type larger
than int.
The maximum cache size in terms of bytes is a 64-bit number. However,
the methods to set it only took unsigned previously, which meant that
the maximum cache size could not be specified above 4GB. That's quite
small compared to the output of some projects, so it makes sense to
provide the ability to set larger values in that field.
We also needed a C-interface function that provides a greater range
than the existing thinlto_codegen_set_cache_size_bytes, which also only
takes an unsigned, so this change also adds
hinlto_codegen_set_cache_size_megabytes.
Reviewed by: mehdi_amini, tejohnson, steven_wu
Differential Revision: https://reviews.llvm.org/D52023
llvm-svn: 342233
See rL342148
This probably only shows up in BUILD_SHARED_LIBS=ON builds
which might explain how it crept in.
Differential Revision: https://reviews.llvm.org/D52054
llvm-svn: 342180
add a tool to generate symbol remapping files.
Summary:
The new tool llvm-cxxmap builds a symbol mapping table from a file containing
a description of partial equivalences to apply to mangled names and files
containing old and new symbol tables.
Reviewers: davidxl
Subscribers: mgorny, llvm-commits
Differential Revision: https://reviews.llvm.org/D51470
llvm-svn: 342168
Summary:
The snippet-generation part goes to the SnippetGenerator class.
This will allow benchmarking arbitrary code (see PR38437).
Reviewers: gchatelet
Subscribers: mgorny, tschuett, llvm-commits
Differential Revision: https://reviews.llvm.org/D51979
llvm-svn: 342117
r342003 added support for emitting FPO data from the
DEBUG_S_FRAMEDATA subsection of the .debug$S section to the PDB
file. However, that is not the end of the story. FPO can end
up in two different destinations in a PDB, each corresponding to
a different FPO data source.
The case handled by r342003 involves copying data from the
DEBUG_S_FRAMEDATA subsection of the .debug$S section to the
"New FPO" stream in the PDB, which is then referred to by the
DBI stream. The case handled by this patch involves copying
records from the .debug$F section of an object file to the "FPO"
stream (or perhaps more aptly, the "Old FPO" stream) in the PDB
file, which is also referred to by the DBI stream.
The formats are largely similar, and the difference is mostly
only visible in masm generated object files, such as some of the
low-level CRT object files like memcpy. MASM doesn't appear to
support writing the DEBUG_S_FRAMEDATA subsection, and instead
just writes these records to the .debug$F section.
Although clang-cl does not emit a .debug$F section ever, lld still
needs to support it so we have good debugging for CRT functions.
Differential Revision: https://reviews.llvm.org/D51958
llvm-svn: 342080
Submitted on behalf of Armando Montanez (amontanez@google.com).
Objects with unused program headers copied by objcopy would always have
nonzero values for program header offset and program header entry size.
While technically valid, this atypical behavior triggers warnings in some
tools. This change sets the two fields to zero when the program header is
unused, better fitting the general expectations for unused program header
data.
Section headers behaved somewhat similarly (though only with the entry size),
and are fixed in this revision as well.
Differential Revision: https://reviews.llvm.org/D51961
llvm-svn: 342065
Eliminating some duplication of rangelist dumping code at the expense of
some version-dependent code in dump and extract routines.
Reviewer: dblaikie, JDevlieghere, vleschuk
Differential revision: https://reviews.llvm.org/D51081
llvm-svn: 342048
Summary:
There are two registers encoded in the S_FRAMEPROC flags: one for locals
and one for parameters. The encoding is described by the
ExpandEncodedBasePointerReg function in cvinfo.h. Two bits are used to
indicate one of four possible values:
0: no register - Used when there are no variables.
1: SP / standard - Variables are stored relative to the standard SP
for the ISA.
2: FP - Variables are addressed relative to the ISA frame
pointer, i.e. EBP on x86. If realignment is required, parameters
use this. If a dynamic alloca is used, locals will be EBP relative.
3: Alternative - Variables are stored relative to some alternative
third callee-saved register. This is required to address highly
aligned locals when there are dynamic stack adjustments. In this
case, both the incoming SP saved in the standard FP and the current
SP are at some dynamic offset from the locals. LLVM uses ESI in
this case, MSVC uses EBX.
Most of the changes in this patch are to pass around the CPU so that we
can decode these into real, named architectural registers.
Subscribers: hiraditya
Differential Revision: https://reviews.llvm.org/D51894
llvm-svn: 341999
Summary:
This patch removes the storing of accumulated floating point data
within the llvm-mca library.
This patch splits-up the two quantities: cycles and number of resource units.
By splitting-up these two quantities, we delay the calculation of "cycles per resource unit"
until that value is read, reducing the chance of accumulating floating point error.
I considered using the APFloat, but after measuring performance, for a large (many iteration)
sample, I decided to go with this faster solution.
Reviewers: andreadb, courbet, RKSimon
Reviewed By: andreadb
Subscribers: llvm-commits, javed.absar, tschuett, gbedwell
Differential Revision: https://reviews.llvm.org/D51903
llvm-svn: 341980
Summary:
In this change, we implement a `BlockPrinter` which orders records in a
Block that's been indexed by the `BlockIndexer`. This is used in the
`llvm-xray fdr-dump` tool which ties together the various types and
utilities we've been working on, to allow for inspection of XRay FDR
mode traces both with and without verification.
This change is the final step of the refactoring of D50441.
Reviewers: mboerger, eizan
Subscribers: mgorny, hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D51846
llvm-svn: 341887
Some asm has double spaces between operands, the deserializer was keeping these empty split pieces, causing assertions later on:
'ADC16mi RDI i_0x1x i_0x0x i_0x1x'
llvm-svn: 341799
In order to start testing this, I've added a new mode to
llvm-pdbutil which is only really useful for writing tests.
It just dumps the value of raw fields in record format.
This isn't really ideal and it won't allow us to test some
important cases, but it's better than nothing for now.
llvm-svn: 341729
Before this patch, analyzeContext called getCanonicalDIEOffset(), for
which the result depends on the timings of the setCanonicalDIEOffset()
calls in the cloneLambda. This can lead to slightly different output
between runs due to threading.
To prevent this from happening, we now record the output debug info size
after importing the modules (before any concurrent processing takes
place). This value, named the ModulesEndOffset is used to compare the
canonical DIE offset against. If the value is greater than this offset,
the canonical DIE offset has been updated during cloning, and should
therefore not be considered for pruning.
Differential revision: https://reviews.llvm.org/D51443
llvm-svn: 341649
Third Attempt:
- Alignment issues resolved.
- zlib::isAvailable() detected.
- ArrayRef misuse fixed.
Usage:
llvm-objcopy --compress-debug-sections=zlib foo.o
llvm-objcopy --compress-debug-sections=zlib-gnu foo.o
In both cases the debug section contents is compressed with zlib. In the GNU
style case the header is the "ZLIB" magic string followed by the uint64 big-
endian decompressed size. In the non-GNU mode the header is the
Elf(32|64)_Chdr.
Decompression support is coming soon.
Differential Revision: https://reviews.llvm.org/D49678
llvm-svn: 341635
Second Attempt. Alignment issues resolved. zlib::isAvailable() detected.
Usage:
llvm-objcopy --compress-debug-sections=zlib foo.o
llvm-objcopy --compress-debug-sections=zlib-gnu foo.o
In both cases the debug section contents is compressed with zlib. In the GNU
style case the header is the "ZLIB" magic string followed by the uint64 big-
endian decompressed size. In the non-GNU mode the header is the
Elf(32|64)_Chdr.
Decompression support is coming soon.
Differential Revision: https://reviews.llvm.org/D49678
llvm-svn: 341607
It caused ambiguity between llvm:🆑:Optional and llvm::Optional, which
has been fixed by dropping `using namespace cl;` in favor of explicit
cl:: qualified names.
llvm-svn: 341586
`using namespace cl` makes llvm:🆑:Optional (in Support/CommandLine.h) visible which will cause ambiguity when unqualified `Optional` is looked up (can also refer to llvm::Optional).
cl:: is used much more than `using namespace cl`, so let's not use the latter.
Also append \n to the argument of cl::ParseCommandLineOptions
llvm-svn: 341584
MRI scripts have two comment chars, * and ;, but only the latter was
supported before.
Also allow leading spaces before comment chars (and before any command
string), and allow comments after a command.
Differential Revision: https://reviews.llvm.org/D51338
llvm-svn: 341571
Keeping the compile units in memory is expensive. For the single
threaded case we allocate them in the analyze part and deallocate them
again once we've finished cloning. This poses a problem in the single
threaded case where we did all the analysis first followed by all the
cloning. This meant we had all the link context in memory right after
analyzing finished.
This patch changes the way we order work in the single threaded case.
Instead of doing all the analysis and cloning in serial, we now
interleave the two so we can deallocate the memory as soon as a file is
processed. The result is binary identical and peak memory usage went
down from 13.43GB to 5.73GB for a debug build of trunk clang.
Differential revision: https://reviews.llvm.org/D51618
llvm-svn: 341568
The way DIA SDK works is that when you request a symbol, it
gets assigned an internal identifier that is unique for the
life of the session. You can then use this identifier to
get back the same symbol, with all of the same internal state
that it had before, even if you "destroyed" the original
copy of the object you had.
This didn't work properly in our native implementation, and
if you destroyed an object for a particular symbol, then
requested the same symbol again, it would get assigned a new
ID and you'd get a fresh copy of the object. In order to fix
this some refactoring had to happen to properly reuse cached
objects. Some unittests are added to verify that symbol
reuse is taking place, making use of the new unittest input
feature.
llvm-svn: 341503
Summary:
Allow strip to be called on multiple input files, which is interpreted as stripping N files in place. Using multiple input files is incompatible with -o.
To allow this, create a `DriverConfig` struct which just wraps a list of `CopyConfigs`. objcopy will only ever have a single `CopyConfig`, but strip will have N (where N >= 1) CopyConfigs.
Reviewers: alexshap, jakehehrlich
Reviewed By: alexshap, jakehehrlich
Subscribers: MaskRay, jakehehrlich, llvm-commits
Differential Revision: https://reviews.llvm.org/D51660
llvm-svn: 341464
Summary:
Fixes the error "Link field value 0 in section .rela.plt is invalid" when copying/stripping certain binaries. Minimal repro:
```
$ cat /tmp/a.c
int main() { return 0; }
$ clang -static /tmp/a.c -o /tmp/a
$ llvm-strip /tmp/a -o /tmp/b
llvm-strip: error: Link field value 0 in section .rela.plt is invalid.
```
Reviewers: jakehehrlich, alexshap
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D51493
llvm-svn: 341419
Zachary Turner