This mostly brings the P5600 scheduler model to a mostly complete
status. There are a number of instructions which trigger the
`error:'MipsP5600Model' lacks information for` error. These are certain
codegen only instructions relating to MIPS64 which can be addressed by
using the correct predicates for them. That will be done in a full-up
patch.
Patch by Simon Dardis.
Differential revision: https://reviews.llvm.org/D45245
llvm-svn: 336802
Reuse this function as to test correctness and profitability of
reducing width of either load or store operations.
Reviewsers: samparker
Differential Revision: https://reviews.llvm.org/D48624
llvm-svn: 336800
This fixes an issue that we were not properly supporting multiple reduction
stmts in a loop, and not generating SMLADs for these cases. The alias analysis
checks were done too early, making it too conservative.
Differential revision: https://reviews.llvm.org/D49125
llvm-svn: 336795
AT_NAME was being emitted before the directory paths were remapped. This
ensures that all paths are remapped before anything is emitted.
An additional test case has been added.
Note that this only works if the replacement string is an absolute path.
If not, then AT_decl_file believes the new path is a relative path, and
joins that path with the compilation directory. I do not know of a good
way to resolve this.
Patch by: Siddhartha Bagaria (starsid)
Differential revision: https://reviews.llvm.org/D49169
llvm-svn: 336793
The compact instruction shuffles active elements of vector
into lowest numbered elements and sets remaining elements
to zero.
e.g.
compact z0.s, p0, z1.s
llvm-svn: 336789
The LASTB and LASTA instructions extract the last active element,
or element after the last active, from the source vector.
The added variants are:
Scalar:
last(a|b) w0, p0, z0.b
last(a|b) w0, p0, z0.h
last(a|b) w0, p0, z0.s
last(a|b) x0, p0, z0.d
SIMD & FP Scalar:
last(a|b) b0, p0, z0.b
last(a|b) h0, p0, z0.h
last(a|b) s0, p0, z0.s
last(a|b) d0, p0, z0.d
The CLASTB and CLASTA conditionally extract the last or element after
the last active element from the source vector.
The added variants are:
Scalar:
clast(a|b) w0, p0, w0, z0.b
clast(a|b) w0, p0, w0, z0.h
clast(a|b) w0, p0, w0, z0.s
clast(a|b) x0, p0, x0, z0.d
SIMD & FP Scalar:
clast(a|b) b0, p0, b0, z0.b
clast(a|b) h0, p0, h0, z0.h
clast(a|b) s0, p0, s0, z0.s
clast(a|b) d0, p0, d0, z0.d
Vector:
clast(a|b) z0.b, p0, z0.b, z1.b
clast(a|b) z0.h, p0, z0.h, z1.h
clast(a|b) z0.s, p0, z0.s, z1.s
clast(a|b) z0.d, p0, z0.d, z1.d
Please refer to the architecture specification for more details on
the semantics of the added instructions.
llvm-svn: 336783
This allows us to use SelectionDAG::isKnownNeverZero in DAGCombiner::visitREM (visitSDIVLike/visitUDIVLike handle the checking for constants).
llvm-svn: 336779
First stage in PR38057 - support non-uniform constant vectors in the combine to reuse the division-by-constant logic.
We can definitely do better for srem pow2 remainders (and avoid that extra multiply....) but this at least helps keep everything on the vector unit.
Differential Revision: https://reviews.llvm.org/D48975
llvm-svn: 336774
gcc 4.7 seems to disagree with gcc 5.3 about whether you need to say
'return std::move(thing)' instead of just 'return thing'. All the
json::Arrays and json::Objects that I was implicitly turning into
json::Values by returning them from functions now have explicit
std::move wrappers, so hopefully 4.7 will be happy now.
llvm-svn: 336772
The aim of this backend is to output everything TableGen knows about
the record set, similarly to the default -print-records backend. But
where -print-records produces output in TableGen's input syntax
(convenient for humans to read), this backend produces it as
structured JSON data, which is convenient for loading into standard
scripting languages such as Python, in order to extract information
from the data set in an automated way.
The output data contains a JSON representation of the variable
definitions in output 'def' records, and a few pieces of metadata such
as which of those definitions are tagged with the 'field' prefix and
which defs are derived from which classes. It doesn't dump out
absolutely every piece of knowledge it _could_ produce, such as type
information and complicated arithmetic operator nodes in abstract
superclasses; the main aim is to allow consumers of this JSON dump to
essentially act as new backends, and backends don't generally need to
depend on that kind of data.
The new backend is implemented as an EmitJSON() function similar to
all of llvm-tblgen's other EmitFoo functions, except that it lives in
lib/TableGen instead of utils/TableGen on the basis that I'm expecting
to add it to clang-tblgen too in a future patch.
To test it, I've written a Python script that loads the JSON output
and tests properties of it based on comments in the .td source - more
or less like FileCheck, except that the CHECK: lines have Python
expressions after them instead of textual pattern matches.
Reviewers: nhaehnle
Reviewed By: nhaehnle
Subscribers: arichardson, labath, mgorny, llvm-commits
Differential Revision: https://reviews.llvm.org/D46054
llvm-svn: 336771
Summary:
These changes cover the PR#31399.
Now the ffs(x) function is lowered to (x != 0) ? llvm.cttz(x) + 1 : 0
and it corresponds to the following llvm code:
%cnt = tail call i32 @llvm.cttz.i32(i32 %v, i1 true)
%tobool = icmp eq i32 %v, 0
%.op = add nuw nsw i32 %cnt, 1
%add = select i1 %tobool, i32 0, i32 %.op
and x86 asm code:
bsfl %edi, %ecx
addl $1, %ecx
testl %edi, %edi
movl $0, %eax
cmovnel %ecx, %eax
In this case the 'test' instruction can't be eliminated because
the 'add' instruction modifies the EFLAGS, namely, ZF flag
that is set by the 'bsf' instruction when 'x' is zero.
We now produce the following code:
bsfl %edi, %ecx
movl $-1, %eax
cmovnel %ecx, %eax
addl $1, %eax
Patch by Ivan Kulagin
Reviewers: davide, craig.topper, spatel, RKSimon
Reviewed By: craig.topper
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D48765
llvm-svn: 336768
These patterns looked for a MOVSS/SD followed by a scalar_to_vector. Or a scalar_to_vector followed by a load.
In both cases we emitted a MOVSS/SD for the MOVSS/SD part, a REG_CLASS for the scalar_to_vector, and a MOVSS/SD for the load.
But we have patterns that do each of those 3 things individually so there's no reason to build large patterns.
Most of the test changes are just reorderings. The one test that had a meaningful change is pr30430.ll and it appears to be a regression. But its doing -O0 so I think it missed a lot of opportunities and was just getting lucky before.
llvm-svn: 336762
The original code attempted to do this, but the std::abs() call didn't
actually do anything due to implicit type conversions. Fix the type
conversions, and perform the correct check for negative immediates.
This probably has very little practical impact, but it's worth fixing
just to avoid confusion in the future, I think.
Differential Revision: https://reviews.llvm.org/D48907
llvm-svn: 336742
If we don't include Initialization.h,
`LLVMInitializeAggressiveInstCombiner` won't see its `extern "C"` decl.
This causes sadness, name mangling, and linker errors.
Reported on the mailing lists by Vladimir Vissoultchev. Thanks!
llvm-svn: 336736
Some added 20 and some added 15. Its unclear when to use which value and whether they are required at all.
This patch removes them all. If we start finding real world issues we may need to add them back with proper tests.
llvm-svn: 336735
Isel currently emits movss/movsd a lot of the time and an accidental double commute turns it into a blend.
Ideally we'd select blend directly in isel under optspeed and not rely on the double commute to create blend.
llvm-svn: 336731
These ISD nodes try to select the MOVLPS and MOVLPD instructions which are special load only instructions. They load data and merge it into the lower 64-bits of an XMM register. They are logically equivalent to our MOVSD node plus a load.
There was only one place in X86ISelLowering that used MOVLPD and no places that selected MOVLPS. The one place that selected MOVLPD had to choose between it and MOVSD based on whether there was a load. But lowering is too early to tell if the load can really be folded. So in isel we have patterns that use MOVSD for MOVLPD if we can't find a load.
We also had patterns that select the MOVLPD instruction for a MOVSD if we can find a load, but didn't choose the MOVLPD ISD opcode for some reason.
So it seems better to just standardize on MOVSD ISD opcode and manage MOVSD vs MOVLPD instruction with isel patterns.
llvm-svn: 336728
Summary:
I noticed that the .imports files emitted for distributed ThinLTO
backends do not have consistent ordering. This is because StringMap
iteration order is not guaranteed to be deterministic. Since we already
have a std::map with this information, used when emitting the individual
index files (ModuleToSummariesForIndex), use it for the imports files as
well.
This issue is likely causing some unnecessary rebuilds of the ThinLTO
backends in our distributed build system as the imports files are inputs
to those backends.
Reviewers: pcc, steven_wu, mehdi_amini
Subscribers: mehdi_amini, inglorion, eraman, steven_wu, dexonsmith, llvm-commits
Differential Revision: https://reviews.llvm.org/D48783
llvm-svn: 336721
I believe isProfitableToFold will stop the load folding that this was intended to overcome.
Given an (xor load, -1), isProfitableToFold will see that the immediate can be folded with the xor using a one byte immediate since it can be sign extended. It doesn't know about NOT, but the one byte immediate check is enough to stop the fold.
llvm-svn: 336712
The llvm_gcov_... routines in compiler-rt are regular C functions that
need to be called using the proper C ABI for the target. The current
code simply calls them using plain LLVM IR types. Since the type are
mostly simple, this happens to just work on certain targets. But other
targets still need special handling; in particular, it may be necessary
to sign- or zero-extended sub-word values to comply with the ABI. This
caused gcov failures on SystemZ in particular.
Now the very same problem was already fixed for the llvm_profile_ calls
here: https://reviews.llvm.org/D21736
This patch uses the same method to fix the llvm_gcov_ calls, in
particular calls to llvm_gcda_start_file, llvm_gcda_emit_function, and
llvm_gcda_emit_arcs.
Reviewed By: marco-c
Differential Revision: https://reviews.llvm.org/D49134
llvm-svn: 336692
When manually finishing the object writer in dsymutil, it's possible
that there are pending labels that haven't been resolved. This results
in an assertion when the assembler tries to fixup a label that doesn't
have an address yet.
Differential revision: https://reviews.llvm.org/D49131
llvm-svn: 336688
This was originally intended with D48893, but as discussed there, we
have to make the folds safe from producing extra poison. This should
give the single binop folds the same capabilities as the existing
folds for 2-binops+shuffle.
LLVM binary opcode review: there are a total of 18 binops. There are 7
commutative binops (add, mul, and, or, xor, fadd, fmul) which we already
fold. We're able to fold 6 more opcodes with this patch (shl, lshr, ashr,
fdiv, udiv, sdiv). There are no folds for srem/urem/frem AFAIK. We don't
bother with sub/fsub with constant operand 1 because those are
canonicalized to add/fadd. 7 + 6 + 3 + 2 = 18.
llvm-svn: 336684
debug compilation dir when compiling assembly files with -g.
Part of PR38050.
Patch by Siddhartha Bagaria!
Differential Revision: https://reviews.llvm.org/D48988
llvm-svn: 336680
This patch adds support for the following instructions:
CLS (Count Leading Sign bits)
CLZ (Count Leading Zeros)
CNT (Count non-zero bits)
CNOT (Logically invert boolean condition in vector)
NOT (Bitwise invert vector)
FABS (Floating-point absolute value)
FNEG (Floating-point negate)
All operations are predicated and unary, e.g.
clz z0.s, p0/m, z1.s
- CLS, CLZ, CNT, CNOT and NOT have variants for 8, 16, 32
and 64 bit elements.
- FABS and FNEG have variants for 16, 32 and 64 bit elements.
llvm-svn: 336677
The case with 2 variables is more complicated than the case where
we eliminate the shuffle entirely because a shuffle with an undef
mask element creates an undef result.
I'm not aware of any current analysis/transform that recognizes that
undef propagating to a div/rem/shift, but we have to guard against
the possibility.
llvm-svn: 336668
An explicit untied use is not sufficient to maintain liveness of a
register redefined in a predicated instruction. For example
%1 = COPY %0
...
%1 = A2_paddif %2, %1, 1
could become
$r1 = COPY $r0
...
$r1 = A2_paddif $p0, $r1, 1
and later
$r1 = COPY $r0 ;; this is not really dead!
...
$r1 = A2_paddif $p0, $r0, 1
llvm-svn: 336662
Summary:
Fixed two cases of where PHI nodes need to be updated by lowerswitch.
When lowerswitch find out that the switch default branch is not
reachable it remove the old default and replace it with the most
popular block from the cases, but it forget to update the PHI
nodes in the default block.
The PHI nodes also need to be updated when the switch is replaced
with a single branch.
Reviewers: hans, reames, arsenm
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D47203
llvm-svn: 336659
Parsing invalid UTF-8 input is now a parse error.
Creating JSON values from invalid UTF-8 now triggers an assertion, and
(in no-assert builds) substitutes the unicode replacement character.
Strings retrieved from json::Value are always valid UTF-8.
llvm-svn: 336657
As suggested by @efriedma on D48975, this patch separates the BuildDiv/Pow2 style optimizations from the rest of the visitSDIV/visitUDIV to make it easier to reuse the combines and will allow us to avoid some rather nasty node recursive combining in visitREM.
llvm-svn: 336656
switch unswitching.
The core problem was that the way we handled unswitching trivial exit
edges through the default successor of a switch. For some reason
I thought the right way to do this was to add a block containing
unreachable and point the default successor at this block. In
retrospect, this has an amazing number of problems.
The first issue is the one that this pass has always worked around -- we
have to *detect* such edges and avoid unswitching them again. This
seemed pretty easy really. You juts look for an edge to a block
containing unreachable. However, this pattern is woefully unsound. So
many things can break it. The amazing thing is that I found a test case
where *simple-loop-unswitch itself* breaks this! When we do
a *non-trivial* unswitch of a switch we will end up splitting this exit
edge. The result will be a default successor that is an exit and
terminates in ... a perfectly normal branch. So the first test case that
I started trying to fix is added to the nontrivial test cases. This is
a ridiculous example that did just amazing things previously. With just
unswitch, it would create 10+ copies of this stuff stamped out. But if
you combine it *just right* with a bunch of other passes (like
simplify-cfg, loop rotate, and some LICM) you can get it to do this
infinitely. Or at least, I never got it to finish. =[
This, in turn, uncovered another related issue. When we are manipulating
these switches after doing a trivial unswitch we never correctly updated
PHI nodes to reflect our edits. As soon as I started changing how these
edges were managed, it became obvious there were more issues that
I couldn't realistically leave unaddressed, so I wrote more test cases
around PHI updates here and ensured all of that works now.
And this, in turn, required some adjustment to how we collect and manage
the exit successor when it is the default successor. That showed a clear
bug where we failed to include it in our search for the outer-most loop
reached by an unswitched exit edge. This was actually already tested and
the test case didn't work. I (wrongly) thought that was due to SCEV
failing to analyze the switch. In fact, it was just a simple bug in the
code that skipped the default successor. While changing this, I handled
it correctly and have updated the test to reflect that we now get
precise SCEV analysis of trip counts for the outer loop in one of these
cases.
llvm-svn: 336646
Now that rL336250 has landed, we should prefer 2 immediate shifts + a shuffle blend over performing a multiply. Despite the increase in instructions, this is quicker (especially for slow v4i32 multiplies), avoid loads and constant pool usage. It does mean however that we increase register pressure. The code size will go up a little but by less than what we save on the constant pool data.
This patch also adds support for v16i16 to the BLEND(SHIFT(v,c1),SHIFT(v,c2)) combine, and also prevents blending on pre-SSE41 shifts if it would introduce extra blend masks/constant pool usage.
Differential Revision: https://reviews.llvm.org/D48936
llvm-svn: 336642
We're missing the EVEX equivalents of these patterns and seem to get along fine.
I think we end up with X86vzload for the obvious IR cases that would produce this DAG.
llvm-svn: 336638
This is prep for DWARF v5 range list emission. Emission of a single range list is moved
to a static helper function.
Reviewer: jdevlieghere
Differential Revision: https://reviews.llvm.org/D49098
llvm-svn: 336621
getSafeVectorConstantForBinop() was calling getBinOpIdentity() assuming
that the constant we wanted was operand 1 (RHS). That's wrong, but I
don't think we could expose a bug or even a suboptimal fold from that
because the callers have other guards for any binop that would have
been affected.
llvm-svn: 336617
Summary:
This adds support for binary atomic read-modify-write instructions:
add, sub, and, or, xor, and xchg.
This does not yet support translations of some of LLVM IR atomicrmw
instructions (nand, max, min, umax, and umin) that do not have a direct
counterpart in wasm instructions.
Reviewers: dschuff
Subscribers: sbc100, jgravelle-google, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D49088
llvm-svn: 336615
Summary:
Support for this option is needed for building Linux kernel.
This is a very frequently requested feature by kernel developers.
More details : https://lkml.org/lkml/2018/4/4/601
GCC option description for -fdelete-null-pointer-checks:
This Assume that programs cannot safely dereference null pointers,
and that no code or data element resides at address zero.
-fno-delete-null-pointer-checks is the inverse of this implying that
null pointer dereferencing is not undefined.
This feature is implemented in LLVM IR in this CL as the function attribute
"null-pointer-is-valid"="true" in IR (Under review at D47894).
The CL updates several passes that assumed null pointer dereferencing is
undefined to not optimize when the "null-pointer-is-valid"="true"
attribute is present.
Reviewers: t.p.northover, efriedma, jyknight, chandlerc, rnk, srhines, void, george.burgess.iv
Reviewed By: efriedma, george.burgess.iv
Subscribers: eraman, haicheng, george.burgess.iv, drinkcat, theraven, reames, sanjoy, xbolva00, llvm-commits
Differential Revision: https://reviews.llvm.org/D47895
llvm-svn: 336613
I don't think there's a need to use `const char *`. In most (probably all?)
cases, we need a length of a name later, so discarding a length will
lead to a wasted effort.
Differential Revision: https://reviews.llvm.org/D49046
llvm-svn: 336612
In non-zero address spaces, we were reporting that an object at `null`
always occupies zero bytes. This is incorrect in many cases, so just
return `unknown` in those cases for now.
Differential Revision: https://reviews.llvm.org/D48860
llvm-svn: 336611
delegate method (and unit test).
The name 'replace' better captures what the old delegate method did: it
returned materialization responsibility for a set of symbols to the VSO.
The new delegate method delegates responsibility for a set of symbols to a new
MaterializationResponsibility instance. This can be used to split responsibility
between multiple threads, or multiple materialization methods.
llvm-svn: 336603
Added __float128 support for a number of rounding operations:
trunc
rint
nearbyint
round
floor
ceil
Differential Revision: https://reviews.llvm.org/D48415
llvm-svn: 336601
Summary:
- Changed variable/function names to be more consistent
- Improved comments in test files
- Added more tests
- Fixed a few typos
- Misc. cosmetic changes
Reviewers: dschuff
Subscribers: sbc100, jgravelle-google, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D49087
llvm-svn: 336598
Summary:
This patch adds support for the atomicrmw instructions and the strong
cmpxchg instruction to the IRTranslator.
I've left out weak cmpxchg because LangRef.rst isn't entirely clear on what
difference it makes to the backend. As far as I can tell from the code, it
only matters to AtomicExpandPass which is run at the LLVM-IR level.
Reviewers: ab, t.p.northover, qcolombet, rovka, aditya_nandakumar, volkan, javed.absar
Reviewed By: qcolombet
Subscribers: kristof.beyls, javed.absar, igorb, llvm-commits
Differential Revision: https://reviews.llvm.org/D40092
llvm-svn: 336589
Build error on Android; reported by and fix provided by (thanks) by Mauro Rossi <issor.oruam@gmail.com>
Fixes the following building error:
external/llvm/lib/Target/AMDGPU/SIInsertWaitcnts.cpp:1903:61:
error: comparison of integers of different signs:
'typename iterator_traits<__wrap_iter<MachineBasicBlock **> >::difference_type'
(aka 'int') and 'unsigned int' [-Werror,-Wsign-compare]
BlockWaitcntProcessedSet.end(), &MBB) < Count)) {
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ^ ~~~~~
1 error generated.
Differential Revision: https://reviews.llvm.org/D49089
llvm-svn: 336588
These won't work for the forseeable future. These aren't allowed
from OpenCL, but IPO optimizations can make them appear.
Also directly set the attributes on functions, regardless
of the linkage rather than cloning functions like before.
llvm-svn: 336587
Summary:
This adds a reverse transform for the instcombine canonicalizations
that were added in D47980, D47981.
As discussed later, that was worse at least for the code size,
and potentially for the performance, too.
https://rise4fun.com/Alive/Zmpl
Reviewers: craig.topper, RKSimon, spatel
Reviewed By: spatel
Subscribers: reames, llvm-commits
Differential Revision: https://reviews.llvm.org/D48768
llvm-svn: 336585
Summary:
If the encoding is not specified in CIE augmentation string, then it
should be DW_EH_PE_absptr instead of DW_EH_PE_omit.
Reviewers: ruiu, MaskRay, plotfi, rafauler
Reviewed By: MaskRay
Subscribers: rafauler, JDevlieghere, llvm-commits
Differential Revision: https://reviews.llvm.org/D49000
llvm-svn: 336577
This is similar to what is done for binops. I don't know if this would have helped us catch the bug fixed in r336566 earlier or not, but I figured it couldn't hurt.
llvm-svn: 336576
This patch ports hasDedicatedExits, getUniqueExitBlocks and
getUniqueExitBlock in Loop to LoopBase so that they can be used
from other LoopBase sub-classes.
Reviewers: chandlerc, sanjoy, hfinkel, fhahn
Reviewed By: chandlerc
Differential Revision: https://reviews.llvm.org/D48817
llvm-svn: 336572
As discussed in D49047 / D48987, shift-by-undef produces poison,
so we can't use undef vector elements in that case..
Note that we need to extend this for poison-generating flags,
and there's a proposal to create poison from FMF in D47963,
llvm-svn: 336562
Summary:
To allow bitcode built by old compiler to pass the current verifer,
BitcodeReader needs to auto infer the correct runtime preemption from
linkage and visibility for GlobalValues.
Since llvm-6.0 bitcode already contains the new field but can be
incorrect in some cases, the attribute needs to be recomputed all the
time in BitcodeReader. This will make all the GVs has dso_local marked
correctly if read from bitcode, and it should still allow the verifier
to catch mistakes in optimization passes.
This should fix PR38009.
Reviewers: sfertile, vsk
Reviewed By: vsk
Subscribers: dexonsmith, llvm-commits
Differential Revision: https://reviews.llvm.org/D49039
llvm-svn: 336560
This is almost NFC, but there could be some case where the original
code had undefs in the constants (rather than just the shuffle mask),
and we'll use safe constants rather than undefs now.
The FIXME noted in foldShuffledBinop() is already visible in existing
tests, so correcting that is the next step.
llvm-svn: 336558
These patterns mapped (v2f64 (X86vzmovl (v2f64 (scalar_to_vector FR64:$src)))) to a MOVSD and an zeroing XOR. But the complexity of a pattern for (v2f64 (X86vzmovl (v2f64))) that selects MOVQ is artificially and hides this MOVSD pattern.
Weirder still, the SSE version of the pattern was explicitly blocked on SSE41, but yet we had copied it to AVX and AVX512.
llvm-svn: 336556
This patch introduces a VPValue in VPBlockBase to represent the condition
bit that is used as successor selector when a block has multiple successors.
This information wasn't necessary until now, when we are about to introduce
outer loop vectorization support in VPlan code gen.
Reviewers: fhahn, rengolin, mkuper, hfinkel, mssimpso
Reviewed By: fhahn
Differential Revision: https://reviews.llvm.org/D48814
llvm-svn: 336554
This patch adds support for the following instructions:
CNTB CNTH - Determine the number of active elements implied by
CNTW CNTD the named predicate constant, multiplied by an
immediate, e.g.
cnth x0, vl8, #16
CNTP - Count active predicate elements, e.g.
cntp x0, p0, p1.b
counts the number of active elements in p1, predicated
by p0, and stores the result in x0.
llvm-svn: 336552
This patch completes support for shifts, which include:
- LSL - Logical Shift Left
- LSLR - Logical Shift Left, Reversed form
- LSR - Logical Shift Right
- LSRR - Logical Shift Right, Reversed form
- ASR - Arithmetic Shift Right
- ASRR - Arithmetic Shift Right, Reversed form
- ASRD - Arithmetic Shift Right for Divide
In the following variants:
- Predicated shift by immediate - ASR, LSL, LSR, ASRD
e.g.
asr z0.h, p0/m, z0.h, #1
(active lanes of z0 shifted by #1)
- Unpredicated shift by immediate - ASR, LSL*, LSR*
e.g.
asr z0.h, z1.h, #1
(all lanes of z1 shifted by #1, stored in z0)
- Predicated shift by vector - ASR, LSL*, LSR*
e.g.
asr z0.h, p0/m, z0.h, z1.h
(active lanes of z0 shifted by z1, stored in z0)
- Predicated shift by vector, reversed form - ASRR, LSLR, LSRR
e.g.
lslr z0.h, p0/m, z0.h, z1.h
(active lanes of z1 shifted by z0, stored in z0)
- Predicated shift left/right by wide vector - ASR, LSL, LSR
e.g.
lsl z0.h, p0/m, z0.h, z1.d
(active lanes of z0 shifted by wide elements of vector z1)
- Unpredicated shift left/right by wide vector - ASR, LSL, LSR
e.g.
lsl z0.h, z1.h, z2.d
(all lanes of z1 shifted by wide elements of z2, stored in z0)
*Variants added in previous patches.
llvm-svn: 336547
As noted in D48987, there are many different ways for this transform to go wrong.
In particular, the poison potential for shifts means we have to more careful with those ops.
I added tests to make that behavior visible for all of the different cases that I could find.
This is a partial fix. To make this review easier, I did not make changes for the single binop
pattern (handled in foldSelectShuffleWith1Binop()). I also left out some potential optimizations
noted with TODO comments. I'll follow-up once we're confident that things are correct here.
The goal is to correct all marked FIXME tests to either avoid the shuffle transform or do it safely.
Note that distinguishing when the shuffle mask contains undefs and using getBinOpIdentity() allows
for some improvements to div/rem patterns, so there are wins along with the missed opportunities
and fixes.
Differential Revision: https://reviews.llvm.org/D49047
llvm-svn: 336546
Support for SVE's TBL instruction for programmable table
lookup/permute using vector of element indices, e.g.
tbl z0.d, { z1.d }, z2.d
stores elements from z1, indexed by elements from z2, into z0.
llvm-svn: 336544
Summary:
This patch adds a new "integer" ValueType, and renames Number -> Double.
This allows us to preserve the full precision of int64_t when parsing integers
from the wire, or constructing from an integer.
The API is unchanged, other than giving asInteger() a clearer contract.
In addition, always output doubles with enough precision that parsing will
reconstruct the same double.
Reviewers: simon_tatham
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D46209
llvm-svn: 336541
r335553 with the non-trivial unswitching of switches.
The code correctly updated most aspects of the CFG and analyses, but
missed some crucial aspects:
1) When multiple cases have the same successor, we unswitch that
a single time and replace the switch with a direct branch. The CFG
here is correct, but the target of this direct branch may have had
a PHI node with multiple entries in it.
2) When we still have to clone a successor of the switch into an
unswitched copy of the loop, we'll delete potentially multiple edges
entering this successor, not just one.
3) We also have to delete multiple edges entering the successors in the
original loop when they have to be retained.
4) When the "retained successor" *also* occurs as a case successor, we
just assert failed everywhere. This doesn't happen very easily
because its always valid to simply drop the case -- the retained
successor for switches is always the default successor. However, it
is likely possible through some contrivance of different loop passes,
unrolling, and simplifying for this to occur in practice and
certainly there is nothing "invalid" about the IR so this pass needs
to handle it.
5) In the case of #4, we also will replace these multiple edges with
a direct branch much like in #1 and need to collapse the entries in
any PHI nodes to a single enrty.
All of this stems from the delightful fact that the same successor can
show up in multiple parts of the switch terminator, and each of these
are considered a distinct edge for the purpose of PHI nodes (and
iterating the successors and predecessors) but not for unswitching
itself, the dominator tree, or many other things. For the record,
I intensely dislike this "feature" of the IR in large part because of
the complexity it causes in passes like this. We already have a ton of
logic building sets and handling duplicates, and we just had to add
a bunch more.
I've added a complex test case that covers all five of the above failure
modes. I've also added a variation on it where #4 and #5 occur in loop
exit, adding fun where we have an LCSSA PHI node with "multiple entries"
despite have dedicated exits. There were no additional issues found by
this, but it seems a useful corner case to cover with testing.
One thing that working on all of this code has made painfully clear for
me as well is how amazingly inefficient our PHI node representation is
(in terms of the in-memory data structures and the APIs used to update
them). This code has truly marvelous complexity bounds because every
time we remove an entry from a PHI node we do a linear scan to find it
and then a linear update to the data structure to remove it. We could in
theory batch all of the PHI node updates into a single linear walk of
the operands making this much more efficient, but the APIs fight hard
against this and the fact that we have to handle duplicates in the
peculiar manner we do (removing all but one in some cases) makes even
implementing that very tedious and annoying. Anyways, none of this is
new here or specific to loop unswitching. All code in LLVM that updates
PHI node operands suffers from these problems.
llvm-svn: 336536
Summary:
This consists of four main parts:
- an type json::Expr representing JSON values of dynamic kind, which can be
composed, inspected, and modified
- a JSON parser from string -> json::Expr
- a JSON printer from json::Expr -> string, with optional pretty-printing
- a convention for mapping json::Expr <=> native types (fromJSON/toJSON)
Mapping functions are provided for primitives (e.g. int, vector) and the
ObjectMapper helper helps implement fromJSON for struct/object types.
Based on clangd's usage, a couple of places I'd appreciate review attention:
- fromJSON returns only bool. A richer error-signaling mechanism may be useful
to provide useful messages, or let recursive fromJSONs (containers/structs)
do careful error recovery.
- should json::obj be always explicitly written (like json::ary)
- there's no streaming parse API. I suspect there are some simple wins like
a callback API where the document is a long array, and each element is small.
But this can probably be bolted on easily when we see the need.
Reviewers: bkramer, labath
Subscribers: mgorny, ilya-biryukov, ioeric, MaskRay, llvm-commits
Differential Revision: https://reviews.llvm.org/D45753
llvm-svn: 336534
Krzysztof Parzyszek