- there are additional fields for glob_t struct, thus size check is failing.
- to access old mman.h api based on caddr_t, _XOPEN_SOURCE needs to be not defined
thus we provide the prototype.
- prxmap_t constified.
Reviewers: ro, eugenis
Reviewed-By: ro
Differential Revision: https://reviews.llvm.org/D84046
This implements OpenMP runtime support for the OpenMP TR8 `present`
map type modifier. The previous patch in this series implements Clang
front end support. See that patch summary for behaviors that are not
yet supported.
Reviewed By: grokos, jdoerfert
Differential Revision: https://reviews.llvm.org/D83062
This patch implements Clang front end support for the OpenMP TR8
`present` map type modifier. The next patch in this series implements
OpenMP runtime support.
This patch does not attempt to implement TR8 sec. 2.22.7.1 "map
Clause", p. 319, L14-16:
> If a map clause with a present map-type-modifier is present in a map
> clause, then the effect of the clause is ordered before all other
> map clauses that do not have the present modifier.
Compare to L10-11, which Clang does not appear to implement yet:
> For a given construct, the effect of a map clause with the to, from,
> or tofrom map-type is ordered before the effect of a map clause with
> the alloc, release, or delete map-type.
This patch also does not implement the `present` implicit-behavior for
`defaultmap` or the `present` motion-modifier for `target update`.
Reviewed By: ABataev
Differential Revision: https://reviews.llvm.org/D83061
A linker optimization is available on PowerPC for GOT indirect PCRelative loads.
The idea is that we can mark a usual GOT indirect load:
pld 3, vec@got@pcrel(0), 1
lwa 3, 4(3)
With a relocation to say that if we don't need to go through the GOT we can let
the linker further optimize this and replace a load with a nop.
pld 3, vec@got@pcrel(0), 1
.Lpcrel1:
.reloc .Lpcrel1-8,R_PPC64_PCREL_OPT,.-(.Lpcrel1-8)
lwa 3, 4(3)
This patch adds the logic that allows the compiler to add the R_PPC64_PCREL_OPT.
Reviewers: nemanjai, lei, hfinkel, sfertile, efriedma, tstellar, grosbach
Reviewed By: nemanjai
Differential Revision: https://reviews.llvm.org/D79864
Summary:
AIX assembly's .set directive is not usable for aliasing purpose.
We need to use extra-label-at-defintion strategy to generate symbol
aliasing on AIX.
Reviewed By: DiggerLin, Xiangling_L
Differential Revision: https://reviews.llvm.org/D83252
For a long time, the InstCombine pass handled target specific
intrinsics. Having target specific code in general passes was noted as
an area for improvement for a long time.
D81728 moves most target specific code out of the InstCombine pass.
Applying the target specific combinations in an extra pass would
probably result in inferior optimizations compared to the current
fixed-point iteration, therefore the InstCombine pass resorts to newly
introduced functions in the TargetTransformInfo when it encounters
unknown intrinsics.
The patch should not have any effect on generated code (under the
assumption that code never uses intrinsics from a foreign target).
This introduces three new functions:
TargetTransformInfo::instCombineIntrinsic
TargetTransformInfo::simplifyDemandedUseBitsIntrinsic
TargetTransformInfo::simplifyDemandedVectorEltsIntrinsic
A few target specific parts are left in the InstCombine folder, where
it makes sense to share code. The largest left-over part in
InstCombineCalls.cpp is the code shared between arm and aarch64.
This allows to move about 3000 lines out from InstCombine to the targets.
Differential Revision: https://reviews.llvm.org/D81728
We don't need the StringsAndChecksumsRef forward declaration as we have to include StringsAndChecksums.h.
We don't need DebugSubsectionRecord.h and we forward declare all referenced classes.
We don't need to include cstdint as we don't use any stdint types.
This is very similar to 243970d03cace2, but handling a slightly
different form of predicated operations. When starting with a pattern of
the form select(p, BinOp(x, y), x), Instcombine will often transform
this to BinOp(x, select(p, y, 0)), where 0 is the identity value of the
binop (0 for adds/subs, 1 for muls, -1 for ands etc). This adds the
patterns that transforms those back into predicated binary operations.
There is also a very minor adjustment to tablegen null_frag in here, to
allow it to also be recognized as a PatLeaf node, so that it can be used
in MVE_TwoOpPattern to easily exclude the cases where we do not need the
alternate transform.
Differential Revision: https://reviews.llvm.org/D84091
Most MVE instructions can be predicated to fold a select into the
instruction, using the predicate and the selects else as a passthough.
This adds tablegen patterns for most two operand instructions using the
newly added TwoOpPattern from 1030e82598.
Differential Revision: https://reviews.llvm.org/D83222
Summary:
This patch reduces file size in debug builds by dropping variable locations a
debugger user will not see.
After building the debug entity history map we loop through it. For each
variable we look at each entry. If the entry opens a location range which does
not intersect any of the variable's scope's ranges then we mark it for removal.
After visiting the entries for each variable we also mark any clobbering
entries which will no longer be referenced for removal, and then finally erase
the marked entries. This all requires the ability to query the order of
instructions, so before this runs we number them.
Tests:
Added llvm/test/DebugInfo/X86/trim-var-locs.mir
Modified llvm/test/DebugInfo/COFF/register-variables.ll
Branch folding merges the tails of if.then and if.else into if.else. Each
blocks' debug-locations point to different scopes so when they're merged we
can't use either. Because of this the variable 'c' ends up with a location
range which doesn't cover any instructions in its scope; with the patch
applied the location range is dropped and its flag changes to IsOptimizedOut.
Modified llvm/test/DebugInfo/X86/live-debug-variables.ll
Modified llvm/test/DebugInfo/ARM/PR26163.ll
In both tests an out of scope location is now removed. The remaining location
covers the entire scope of the variable allowing us to emit it as a single
location.
Reviewed By: aprantl
Differential Revision: https://reviews.llvm.org/D82129
These functions can be used to generate strings like
"SHT_?? section with index ?" to describe sections in error/warning messages,
what helps to simplify and generalize them.
Also this allows to isolate the following common code pattern:
`&Sec - &cantFail(Obj->sections()).front();`
Differential revision: https://reviews.llvm.org/D84240
v3i16 and v3f16 currently cannot be legalized and lowered so they should
not be emitted by inst combining.
Moved the check down to still allow extracting 1 or 2 elements via the dmask.
Fixes image intrinsics being combined to return v3x16.
Differential Revision: https://reviews.llvm.org/D84223
The current behavior was introduced by me in D37567 and it is a bit strange. It prints the
"Error: ...." message to the errs() manually and stops dumping the group section which has this error.
This behavior is consistent with GNU though, but it is very inconsistent with what the regular llvm-readelf
code usually does/prints, so I suggest to change the implementation:
1) Instead of printing "Error: ...." to errs() - just report a warning.
2) Try to continue dumping the section.
3) Merge broken-group.test to group.text.
This is what this patch does.
Differential revision: https://reviews.llvm.org/D84170
In fixupIsDeadOrKill, we assume StartMI and EndMI not exist in same
basic block, so we add an assertion in that function. This is wrong
before RA, as before RA the true definition may exist in another
block through copy like instructions.
Reviewed By: nemanjai
Differential Revision: https://reviews.llvm.org/D83365
Summary:
The fix improves handling of Windows UNC paths to align with Appendix E. Nonstandard Syntax Variations of RFC 8089.
Before this fix it was difficult to use Windows UNC paths in compile_commands.json database as such paths were converted to file URIs using 'file:////auth/share/file.cpp' notation instead of recommended 'file://auth/share/file.cpp'.
As an example, VS.Code cannot understand file URIs with 4 starting slashes, thus such features as go-to-definition, jump-to-file, hover tooltip, etc. stop working. This also applicable to files which reside on Windows network-mapped drives because clangd internally resolves file paths to real paths in some cases and such paths get resolved to UNC paths.
Reviewers: sammccall, kadircet
Reviewed By: sammccall
Subscribers: ormris, ilya-biryukov, MaskRay, jkorous, arphaman, kadircet, usaxena95, kbobyrev, cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D84172
We have an issue currently: we are trying to read the name of the SHT_DYNSYM section
very early and using `unwrapOrError` call for that.
The name is needed only for the GNU output. Because of the current logic, the tool
fails to dump the whole object when something is wrong with the name of the .dynsym section.
This patch delays reading the name and also allows it to be broken.
Differential revision: https://reviews.llvm.org/D84173
Summary:
This commmit adds another relation that we can track separately from
range constraints. Symbol disequality can help us understand that
two equivalence classes are not equal to each other. We can generalize
this knowledge to classes because for every a,b,c, and d that
a == b, c == d, and b != c it is true that a != d.
As a result, we can reason about other equalities/disequalities of symbols
that we know nothing else about, i.e. no constraint ranges associated
with them. However, we also benefit from the knowledge of disequal
symbols by following the rule:
if a != b and b == C where C is a constant, a != C
This information can refine associated ranges for different classes
and reduce the number of false positives and paths to explore.
Differential Revision: https://reviews.llvm.org/D83286
Summary:
For the most cases, we try to reason about symbol either based on the
information we know about that symbol in particular or about its
composite parts. This is faster and eliminates costly brute force
searches through existing constraints.
However, we do want to support some cases that are widespread enough
and involve reasoning about different existing constraints at once.
These include:
* resoning about 'a - b' based on what we know about 'b - a'
* reasoning about 'a <= b' based on what we know about 'a > b' or 'a < b'
This commit expands on that part by tracking symbols known to be equal
while still avoiding brute force searches. It changes the way we track
constraints for individual symbols. If we know for a fact that 'a == b'
then there is no need in tracking constraints for both 'a' and 'b' especially
if these constraints are different. This additional relationship makes
dead/live logic for constraints harder as we want to maintain as much
information on the equivalence class as possible, but we still won't
carry the information that we don't need anymore.
Differential Revision: https://reviews.llvm.org/D82445
Summary:
* Add a new function to delete points from range sets.
* Introduce an internal generic interface for range set intersections.
* Remove unnecessary bits from a couple of solver functions.
* Add in-code sections.
Differential Revision: https://reviews.llvm.org/D82381
After more investigation, I realised this part of the code is totally
unused. It was used for communicating the test results from the
"inferior" dotest process to the main "dosep" process running
everything. Now that everything is being orchestrated through lit, this
is not used for anything.
This patch addresses two issues:
* Forces the availability of the base-pointer (x19) when the frame has
both scalable vectors and variable-length arrays. Otherwise it will
be expensive to access non-SVE locals.
* In presence of SVE stack objects, it will allocate the emergency
scavenging slot close to the SP, so that they can be accessed from
the SP or BP if available. If accessed from the frame-pointer, it will
otherwise need an extra register to access the scavenging slot because
of mixed scalable/non-scalable addressing modes.
Reviewers: efriedma, ostannard, cameron.mcinally, rengolin, david-arm
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D70174
Summary: In Python3 SubstituteCaptures are no longer converted to String implicitly behind the scenes. Converting explicitly makes the TestRunner to work in Python3.
Reviewers: gribozavr2, compnerd
Reviewed By: gribozavr2
Subscribers: tbkka, delcypher, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D81361
This patch introduce a new feature that allows the users to save their
debugging session's transcript (commands + outputs) to a file.
It differs from the reproducers since it doesn't require to capture a
session preemptively and replay the reproducer file in lldb.
The user can choose the save its session manually using the session save
command or automatically by setting the interpreter.save-session-on-quit
on their init file.
To do so, the patch adds a Stream object to the CommandInterpreter that
will hold the input command from the IOHandler and the CommandReturnObject
output and error. This way, that stream object accumulates passively all
the interactions throughout the session and will save them to disk on demand.
The user can specify a file path where the session's transcript will be
saved. However, it is optional, and when it is not provided, lldb will
create a temporary file name according to the session date and time.
rdar://63347792
Differential Revision: https://reviews.llvm.org/D82155
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
Summary:
registerSharedLibrariesWithTarget was setting the library path
environment variable to the process build directory, but the function is
also accepting libraries in other directories (in which case they won't
be found automatically).
This patch makes the function set the path variable correctly for these
libraries too. This enables us to remove the code for setting the path
variable in TestWeakSymbols.py, which was working only accidentally --
it was relying on the fact that
launch_info.SetEnvironmentEntries(..., append=True)
would not overwrite the path variable it has set, but that is going to
change with D83306.
Reviewers: davide, jingham
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D83552
When the compiler generates a GOT indirect load it must generate two loads. One
that loads the address of the element from the GOT and a second to load the
actual element based on the address just loaded from the GOT. However, the
linker can optimize these two loads into one load if it knows that it is safe
to do so. The compiler can tell the linker that the optimization is safe
by using the R_PPC64_PCREL_OPT relocation.
This patch extends the .reloc directive to allow the following setup
pld 3, vec@got@pcrel(0), 1
.Lpcrel1=.-8
... More instructions possible here ...
.reloc .Lpcrel1,R_PPC64_PCREL_OPT,.-.Lpcrel1
lwa 3, 4(3)
Reviewers: nemanjai, lei, hfinkel, sfertile, efriedma, tstellar, grosbach, MaskRay
Reviewed By: nemanjai, MaskRay
Differential Revision: https://reviews.llvm.org/D79625
Summary:
This was resulting in macros coming from preambles vanishing when user
have opened the source header. For example:
```
// test.h:
#define X
```
and
```
// test.cc
#include "test.h
^
```
If user only opens test.cc, we'll get `X` as a completion candidate,
since it is indexed as part of the preamble. But if the user opens
test.h afterwards we would index it as part of the main file and lose
the symbol (as new index shard for test.h will override the existing one
in dynamic index).
Also we were not setting origins for macros correctly, this patch also
fixes it.
Fixes https://github.com/clangd/clangd/issues/461
Reviewers: hokein
Subscribers: ilya-biryukov, MaskRay, jkorous, arphaman, usaxena95, cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D84297
Summary:
[Thumb] set code alignment for 16-bit load from constant pool
LLVM miscompiles this code when compiling for a target with v8.2-A FP16 and the Thumb ISA at -O0:
extern void bar(__fp16 P5);
int main() {
__fp16 P5 = 1.96875;
bar(P5);
}
The code section containing main has 2 byte alignment.
It needs to have 4 byte alignment,
because the load literal instruction has an offset from the
load address with the low 2 bits zeroed.
I do not include a test case in this check-in.
llc and llvm-mc do not exhibit this bug. They do not set code section alignment
in the same manner as clang.
Reviewers: dnsampaio
Reviewed By: dnsampaio
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D84169
Pass LowerMatrixIntrinsics wasn't running yet running under the new pass
manager, and this adds LowerMatrixIntrinsics to the pipeline (to the
same place as where it is running in the old PM).
Differential Revision: https://reviews.llvm.org/D84180
This assert was added to verify assumption that GEP's SCEV will be of pointer type,
basing on fact that it should be a SCEVAddExpr with (at least) last operand being
pointer. Two notes:
- GEP's SCEV does not have to be a SCEVAddExpr after all simplifications;
- In current state, GEP's SCEV does not have to have at least one pointer operands
(all of them can become int during the transforms).
However, we might want to be at a point where it is true. We are currently removing
this assert and will try to enumerate the cases where "is pointer" notion might be
lost during the transforms. When all of them are fixed, we can return it.
Differential Revision: https://reviews.llvm.org/D84294
Reviewed By: lebedev.ri
Range that f16 can represent fits into i32.
Lower as f16->i32->i64 instead of f16->f32->i64
since f32->i64 has long expansion.
Differential Revision: https://reviews.llvm.org/D84166
Summary:
This fixes Bugzilla #46616 in which it was reported
that "tbb [pc, r0]" was marked as SoftFail
(aka unpredictable) incorrectly.
Expected behaviour is:
* ARMv8 is required to use sp as rn or rm
(tbb/tbh only have a Thumb encoding so using Arm mode
is not an option)
* If rm is the pc then the instruction is always
unpredictable
Some of this was implemented already and this fixes the
rest. Added tests cover the new and pre-existing handling.
Reviewers: ostannard
Reviewed By: ostannard
Subscribers: kristof.beyls, hiraditya, danielkiss, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D84227
Using -fmodules-* options for PCHs is a bit confusing, so add -fpch-*
variants. Having extra options also makes it simple to do a configure
check for the feature.
Also document the options in the release notes.
Differential Revision: https://reviews.llvm.org/D83623
This way should be the same like with a.pcm for modules.
An alternative way is 'clang++ -c empty.cpp -include-pch a.pch -o a.o
-Xclang -building-pch-with-obj', which is what clang-cl's /Yc does
internally.
Differential Revision: https://reviews.llvm.org/D83716
If an expression is contains-error and its type is unknown (dependent), we
don't treat it as a null pointer constant.
Fix a recovery-ast crash on C.
Differential Revision: https://reviews.llvm.org/D84222
This was originally reverted because the Linux bots were red after this landed,
but it seems that was actually caused by a different commit. I double checked
that this works on Linux, so let's reland this on Linux.
Summary:
FormattersContainer stores LLDB's formatters. It's implemented as a templated
map-like data structures that supports any kind of value type and only allows
ConstString and RegularExpression as the key types. The keys are used for
matching type names (e.g., the ConstString key `std::vector` matches the type
with the same name while RegularExpression keys match any type where the
RegularExpression instance matches).
The fact that a single FormattersContainer can only match either by string
comparison or regex matching (depending on the KeyType) causes us to always have
two FormatterContainer instances in all the formatting code. This also leads to
us having every type name matching logic in LLDB twice. For example,
TypeCategory has to implement every method twice (one string matching one, one
regex matching one).
This patch changes FormattersContainer to instead have a single `TypeMatcher`
key that wraps the logic for string-based and regex-based type matching and is
now the only possible KeyType for the FormattersContainer. This means that a
single FormattersContainer can now match types with both regex and string
comparison.
To summarize the changes in this patch:
* Remove all the `*_Impl` methods from `FormattersContainer`
* Instead call the FormatMap functions from `FormattersContainer` with a
`TypeMatcher` type that does the respective matching.
* Replace `ConstString` with `TypeMatcher` in the few places that directly
interact with `FormattersContainer`.
I'm working on some follow up patches that I split up because they deserve their
own review:
* Unify FormatMap and FormattersContainer (they are nearly identical now).
* Delete the duplicated half of all the type matching code that can now use one
interface.
* Propagate TypeMatcher through all the formatter code interfaces instead of
always offering two functions for everything.
There is one ugly design part that I couldn't get rid of yet and that is that we
have to support getting back the string used to construct a `TypeMatcher` later
on. The reason for this is that LLDB only supports referencing existing type
matchers by just typing their respective input string again (without even
supplying if it's a regex or not).
Reviewers: davide, mib
Reviewed By: mib
Subscribers: mgorny, JDevlieghere
Differential Revision: https://reviews.llvm.org/D84151
AllocOp is updated in normalizeMemref(AllocOp allocOp), but, when the
AllocOp has `alignment` attribute, it was ignored and updated AllocOp
does not have `alignment` attribute. This patch fixes it.
Differential Revision: https://reviews.llvm.org/D83656