This change adds ASAN_OPTIONS=start_deactivated=1 flag. When present, ASan will
start in "deactivated" mode, with no heap poisoning, no quarantine, no stack
trace gathering, and minimal redzones. All this features come back when
__asan_init is called for the constructor of an instrumented library.
The primary use case for this feature is Android. Code itself is not
Android-specific, and this patch includes a Linux test for it.
llvm-svn: 199377
There are two attempted optimisations in reMaterializeTrivialDef, trying to
avoid promoting the size of a register too much when rematerializing.
Unfortunately, both appear to be flawed. First, we see if the original register
would have worked, but this is inadequate. Consider:
v1 = SOMETHING (v1 is QQ)
v2:Q0 = COPY v1:Q1 (v1, v2 are QQ)
...
uses of v2
In this case even though v2 *could* be used directly as the output of
SOMETHING, this would set the wrong bits of the QQ register involved. The
correct rematerialization must be:
v2:Q0_Q1 = SOMETHING (v2 promoted to QQQ)
...
uses of v2:Q1_Q2
For the second optimisation, if the correct remat is "v2:idx = SOMETHING" then
we can't necessarily expect v2 itself to be valid for SOMETHING, but we do try
to hunt for a class between v1 and v2 that works. Unfortunately, this is also
wrong:
v1 = SOMETHING (v1 is QQ)
v2:Q0_Q1 = COPY v1 (v1 is QQ, v2 is QQQ)
...
uses of v2 as a QQQ
The canonical rematerialization here is "v2:Q0_Q1 = SOMETHING". However current
logic would decide that v2 could be a QQ (no interest is taken in later uses).
This patch, therefore, always accepts the widened register class without trying
to be clever. Generally there is no penalty to this (e.g. in the common GR32 <
GR64 case, expanding the width doesn't matter because it's not like you were
going to do anything else with the high bits of a GR32 register). It can
increase register pressure in cases like the ARM VFP regs though (multiple
non-overlapping but equivalent subregisters). This situation can be
spotted by the fact that both source and destination in the
not-quite-coalesced pair have a sub-register index and
rematerialisation is skipped in that situation.
Unfortunately, no in-tree targets actually expose this as far as I can tell
(there are so few isAsCheapAsAMove instructions for it to trigger on) so I've
been unable to produce a test. It was exposed in our ARM64 SPEC tests though,
and I will be adding a test there that we should be able to contribute
soon(TM).
rdar://problem/15775279
llvm-svn: 199376
We would attempt to determine the inheritance relationship between
classes 'A' and 'B' during static_cast if we tried to convert from 'int
A::*' to 'int B::*'. However, the question "does A derive from B" is
not meaningful when 'A' isn't defined.
Handle this case by requiring that 'A' be defined.
This fixes PR18506.
llvm-svn: 199374
flag from clang, and disable zero-base shadow support on all platforms
where it is not the default behavior.
- It is completely unused, as far as we know.
- It is ABI-incompatible with non-zero-base shadow, which means all
objects in a process must be built with the same setting. Failing to
do so results in a segmentation fault at runtime.
- It introduces a backward dependency of compiler-rt on user code,
which is uncommon and complicates testing.
This is the Clang part of a larger change.
llvm-svn: 199372
flag from clang, and disable zero-base shadow support on all platforms
where it is not the default behavior.
- It is completely unused, as far as we know.
- It is ABI-incompatible with non-zero-base shadow, which means all
objects in a process must be built with the same setting. Failing to
do so results in a segmentation fault at runtime.
- It introduces a backward dependency of compiler-rt on user code,
which is uncommon and complicates testing.
This is the LLVM part of a larger change.
llvm-svn: 199371
Previously we had bodged together some hacks mapping MachO embedded
targets (i.e. mainly ARM v6M and v7M) to the "*-*-darwin-eabi" triple.
This is incorrect in both details (they don't run Darwin and they're
not EABI in any real sense).
This commit appropriates the existing "MachO" environment for the
purpose instead.
llvm-svn: 199367
This patch adds the capability to dump export table contents. An example
output is this:
Export Table:
Ordinal RVA Name
5 0x2008 exportfn1
6 0x2010 exportfn2
By adding this feature to llvm-objdump, we will be able to use it to check
export table contents in LLD's tests. Currently we are doing binary
comparison in the tests, which is fragile and not readable to humans.
llvm-svn: 199358
The generation of the native_export_file end up in
several different makefiles. All those makefiles
write the same file, but can be executed concurrently...
and bad things happen!
llvm-svn: 199356
Move copying of global initializers below the cloning of functions.
The BlockAddress doesn't have access to the correct basic blocks until the
functions have been cloned. This causes the BlockAddress to point to the old
values. Just wait until the functions have been cloned before copying the
initializers.
PR13163
llvm-svn: 199354
DataRefImpl (a union of two integers and a pointer) is not the ideal data type
to represent a reference to an import directory entity. We should just use the
pointer to the import table and an offset instead to simplify. No functionality
change.
llvm-svn: 199349
This ports the last Sema tests over to use the frontend directly, and adds a
local lit substitution to disable inappropriate %clang usage under this
directory.
llvm-svn: 199348
-verify was simply ignored by the driver.
This commit fixes the RUN line and XFAILs the test, unblocking changes to ban
use of the driver in Sema tests and avoid problems like this.
llvm-svn: 199347
than it needs to be by 1 bit but I need to finish some other things so
that all the boundary cases will work in that situation. constpool.c
in test-suite will fail to assemble under our new internal test-suite sync
without this change.
llvm-svn: 199343
If a binary does not depend on any DLL, it does not contain import table at
all. Printing the section title without contents looks wrong, so we shouldn't
print it in that case.
llvm-svn: 199340
ARM assembly syntax uses @ for a comment, execpt for the second
parameter of the .symver directive which requires @ as part of the
symbol name. This commit fixes the parsing of this directive by
adding a special case for ARM for this one argumnet.
To make the change we had to move the AllowAtInIdentifier variable
to the MCAsmLexer interface (from AsmLexer) and expose a setter for
the value. The ELFAsmParser then toggles this value when parsing
the second argument to the .symver directive for a target that
uses @ as a comment symbol
llvm-svn: 199339
Add a hook in the C API of LTO so that clients of the code generator can set
their own handler for the LLVM diagnostics.
The handler is defined like this:
typedef void (*lto_diagnostic_handler_t)(lto_codegen_diagnostic_severity_t
severity, const char *diag, void *ctxt)
- severity says how bad this is.
- diag is a string that contains the diagnostic message.
- ctxt is the registered context for this handler.
This hook is more general than the lto_get_error_message, since this function
keeps only the latest message and can only be queried when something went wrong
(no warning for instance).
<rdar://problem/15517596>
llvm-svn: 199338
which catch buggy versions of libstdc++. While libc++ would pass them,
we don't actually update the state in the configure script to use libc++
when we pass --enable-libcpp, the logic for that is in the
Makefiles. So just completely skip the library test when that configure
flag is passed.
Hopefully this will be enough to fix the darwin bots at last, and thanks
to Duncan Smith for getting things set up so I can watch the bots myself
on lab.llvm.org and see any failures!
llvm-svn: 199334
This fixes a regression intruced by r199135.
Revision 199135 tried to simplify part of the logic in method
DAGCombiner::SimplifyVBinOp introducing calls to method BuildVectorSDNode::isConstant().
However, that revision wrongly changed the check performed by method
SimplifyVBinOp to identify dag nodes that can be folded.
Before revision 199135, that method only tried to simplify vector binary operations
if both operands were build_vector of Constant/ConstantFP/Undef only.
After revision 199135, method SimplifyVBinop tried to
simplify also vector binary operations with only one constant operand.
This fixes the problem restoring the old behavior of SimplifyVBinOp.
llvm-svn: 199328
I did write a version returning ErrorOr<OwningPtr<Binary> >, but it is too
cumbersome to use without std::move. I will keep the patch locally and submit
when we switch to c++11.
llvm-svn: 199326
enable flag that selects the C++ standard library to use with the host
toolchain. Otherwise we end up testing the wrong config.
I'm not really happy about this placement, but its pragmatic and should
unblock the Apple builders.
llvm-svn: 199325
marked as AlwaysInline or ForceInline.
This moves us to what gcc does with -fno-inline. The attribute approach
was discussed to be better than switching to InlineAlways inliner in presence
of LTO.
llvm-svn: 199324
Evgeniy Stepanov