The 0xf3 prefix has been defined as wbnoinvd on Icelake Server. So
the prefix isn't ignored by the CPU. AMD documentation suggests that
wbnoinvd is treated as wbinvd on older processors. Intel documentation
is not clear. Perhaps 0xf2 and 0x66 are treated the same, but its
not documented.
This patch changes TB to PS in the td file so 0xf2 and 0x66 will
be treated as errors. This matches versions of objdump after
wbnoinvd was added.
We require d/q suffixes on the memory form of these instructions to disambiguate the memory size.
We don't require it on the register forms, but need to support parsing both with and without it.
Previously we always printed the d/q suffix on the register forms, but it's redundant and
inconsistent with gcc and objdump.
After this patch we should support the d/q for parsing, but not print it when its unneeded.
llvm-svn: 360085
The 0x63 opcodes in 64-bit mode have a fixed source size of 32-bits, but the destination size is controlled by REX.W and the 0x66 opsize prefix. This instruction is normally used with a REX.W prefix which provides desired behavior. The other encodings are interpretted as valid by the processor, but aren't useful.
This patch makes us recognize them for the disassembler to match objdump.
llvm-svn: 343614
The behavior in 64-bit mode is different between Intel and AMD CPUs. Intel ignores the 0x66 prefix. AMD does not. objump doesn't ignore the 0x66 prefix. Since LLVM aims to match objdump behavior, we should do the same.
While I was trying to fix this I had change brtarget16/32 to use ENCODING_IW/ID instead of ENCODING_Iv to get the 0x66+REX.W case to act sort of sanely. It's still wrong, but that's a problem for another day.
The change in encoding exposed the fact that 16-bit mode disassembly of relative jumps was creating JMP_4 with a 2 byte immediate. It should have been JMP_2. From just printing you can't tell the difference, but if you dumped the encoding it wouldn't have matched what we started with.
While fixing that, it exposed that jo/jno opcodes were missing from the switch that this patch deleted and there were no test cases for them.
Fixes PR38537.
llvm-svn: 339622
The %eiz/%riz are dummy registers that force the encoder to emit a SIB byte when it normally wouldn't. By emitting them in the disassembly output we ensure that assembling the disassembler output would also produce a SIB byte.
This should match the behavior of objdump from binutils.
llvm-svn: 335768
A 5-bit value can occur when EVEX.X is 0 due to it being used to extend modrm.rm to encode XMM16-31. But if modrm.rm instead encodes a GPR, the Intel documentation says EVEX.X should be ignored so just mask it to 4 bits once we know its a GPR.
llvm-svn: 333725
EVEX.X is used to extended modrm.rm when the instruction encodes a XMM/YMM/ZMM register. But we aren't properly ignoring it when it encodes a GPR and we end up printing whatever registers exist in X86 register enum after the GPRs.
llvm-svn: 333724
This was an accidental side effect of EVEX.X being used to encode XMM16-XMM31 using modrm.rm with modrm.mod==0x3.
I think there are still more bugs related to this.
llvm-svn: 333722
Summary:
and use the -msgx flag as a requirement
for the SGX instructions.
Reviewers: craig.topper, zvi
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D46436
llvm-svn: 331742
This encoding is recognized by the CPU, but the behavior is undefined. This makes the disassembler handle it correctly so we don't print bswapl with a 16-bit register.
llvm-svn: 330682
This demonstrates a bug where the encoding for a 16-bit bswap prints a 16-bit register and a 32-bit mnemonic. Intel docs say 16-bit bswap is undefined. We should either claim it as an invalid encoding or we should print a 16-bit mnemonic.
objdump does print the encoding as bswap with a 16-bit register. But it doesn't seem to ever print a suffix.
llvm-svn: 330621
Three new instructions:
umonitor - Sets up a linear address range to be
monitored by hardware and activates the monitor.
The address range should be a writeback memory
caching type.
umwait - A hint that allows the processor to
stop instruction execution and enter an
implementation-dependent optimized state
until occurrence of a class of events.
tpause - Directs the processor to enter an
implementation-dependent optimized state
until the TSC reaches the value in EDX:EAX.
Also modifying the description of the mfence
instruction, as the rep prefix (0xF3) was allowed
before, which would conflict with umonitor during
disassembly.
Before:
$ echo 0xf3,0x0f,0xae,0xf0 | llvm-mc -disassemble
.text
mfence
After:
$ echo 0xf3,0x0f,0xae,0xf0 | llvm-mc -disassemble
.text
umonitor %rax
Reviewers: craig.topper, zvi
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D45253
llvm-svn: 330462
Hint to hardware to move the cache line containing the
address to a more distant level of the cache without
writing back to memory.
Reviewers: craig.topper, zvi
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D45256
llvm-svn: 329992
Similar to the wbinvd instruction, except this
one does not invalidate caches. Ring 0 only.
The encoding matches a wbinvd instruction with
an F3 prefix.
Reviewers: craig.topper, zvi, ashlykov
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D43816
llvm-svn: 329847
This behavior existed to work with an old version of the gnu assembler on MacOS that only accepted this form. Newer versions of GNU assembler and the current LLVM derived version of the assembler on MacOS support movq as well.
llvm-svn: 321898
This introduces a new operand type to encode the whether the index register should be XMM/YMM/ZMM. And new code to fixup the results created by readSIB.
This has the nice effect of removing a bunch of code that hard coded the name of every GATHER and SCATTER instruction to map the index type.
This fixes PR32807.
llvm-svn: 316273
This patch adds support for the the LightWeight Profiling (LWP) instructions which are available on all AMD Bulldozer class CPUs (bdver1 to bdver4).
Reapplied - this time without changing line endings of existing files.
Differential Revision: https://reviews.llvm.org/D32769
llvm-svn: 302041
This patch adds support for the the LightWeight Profiling (LWP) instructions which are available on all AMD Bulldozer class CPUs (bdver1 to bdver4).
Differential Revision: https://reviews.llvm.org/D32769
llvm-svn: 302028
This is a fix for disassembling unusual instruction sequences in 64-bit
mode w.r.t the CALL rel16 instruction. It might be desirable to move the
check somewhere else, but it essentially mimics the special case
handling with JCXZ in 16-bit mode.
The current behavior accepts the opcode size prefix and causes the
call's immediate to stop disassembling after 2 bytes. When debugging
sequences of instructions with this pattern, the disassembler output
becomes extremely unreliable and essentially useless (if you jump midway
into what lldb thinks is a unified instruction, you'll lose %rip). So we
ignore the prefix and consume all 4 bytes when disassembling a 64-bit
mode binary.
Note: in Vol. 2A 3-99 the Intel spec states that CALL rel16 is N.S. N.S.
is defined as:
Indicates an instruction syntax that requires an address override
prefix in 64-bit mode and is not supported. Using an address
override prefix in 64-bit mode may result in model-specific
execution behavior. (Vol. 2A 3-7)
Since 0x66 is an operand override prefix we should be OK (although we
may want to warn about 0x67 prefixes to 0xe8). On the CPUs I tested
with, they all ignore the 0x66 prefix in 64-bit mode.
Patch by Matthew Barney!
Differential Revision: http://reviews.llvm.org/D9573
llvm-svn: 246038
Requires new AsmParserOperand types that detect 16-bit and 32/64-bit mode so that we choose the right instruction based on default sizing without predicates. This is necessary since predicates mess up the disassembler table building.
llvm-svn: 225256
Craig Topper