This makes it possible to indent a binary blob by a certain
number of bytes, and also makes some things more idiomatic.
Finally, it integrates this binary blob formatter into ScopedPrinter
which used to have its own implementation of this algorithm.
Differential Revision: https://reviews.llvm.org/D26477
llvm-svn: 286495
If a response file included by construct @file itself includes a response file
and that file is specified by relative file name, current behavior is to resolve
the name relative to the current working directory. The change adds additional
flag to ExpandResponseFiles that may be used to resolve nested response file
names relative to including file. With the new mode a set of related response
files may be kept together and reference each other with short position
independent names.
Differential Revision: https://reviews.llvm.org/D24917
llvm-svn: 285675
This resubmits r284436 and r284437, which were reverted in
r284462 as they were breaking the AArch64 buildbot.
The breakage on AArch64 turned out to be a miscompile which is
still not fixed, but is actively tracked at llvm.org/pr30748.
This resubmission re-writes the code in a way so as to make the
miscompile not happen.
llvm-svn: 285483
On i386 alignof(double) = 8 is not the same as alignof(struct { double
}) = 4. This used to be not an issue because the old implementation
always measured alignment inside of structs. Wrap a dummy struct around
the test to avoid this issue.
llvm-svn: 284812
Also clean up the legacy hacks for AlignedCharArray. I'm keeping
LLVM_ALIGNAS alive for a bit longer because GCC 4.8.0 (which we still
support apparently) shipped a buggy alignas(). All other supported
compilers have a working alignas.
llvm-svn: 284736
This is a resubmission of r284590. The mingw build should be fixed now. The
problem was we were matching time_t with _localtime_64s, which was incorrect on
_USE_32BIT_TIME_T systems. Instead I use localtime_s, which should always
evaluate to the correct function.
llvm-svn: 284720
This reverts commit r284590 as it fails on the mingw buildbot. I think I know the
fix, but I cannot test it right now. Will reapply when I verify it works ok.
This reverts r284590.
llvm-svn: 284615
Summary:
std::chrono mostly covers the functionality of llvm::sys::TimeValue and
lldb_private::TimeValue. This header adds a bit of utility functions and
typedefs, which make the usage of the library and porting code from TimeValues
easier.
Rationale:
- TimePoint typedef - precision of system_clock is implementation defined -
using a well-defined precision helps maintain consistency between platforms,
makes it interact better with existing TimeValue classes, and avoids cases
there a time point is implicitly convertible to a specific precision on some
platforms but not on others.
- system_clock::to_time_t only accepts time_points with the default system
precision (even though time_t has only second precision on all platforms we
support). To avoid the need for explicit casts, I have added a toTimeT()
wrapper function. toTimePoint(time_t) was not strictly necessary, but I have
added it for symmetry.
Reviewers: zturner, mehdi_amini
Subscribers: beanz, mgorny, llvm-commits, modocache
Differential Revision: https://reviews.llvm.org/D25416
llvm-svn: 284590
This reverts commits 284436 and 284437 because they still break AArch64 bots:
Value of: format_number(-10, IntegerStyle::Integer, 1)
Actual: "-0"
Expected: "-10"
llvm-svn: 284462
This resubmits commits 284425 and r284428, which were reverted
in r284429 due to some infinite recursion caused by an incorrect
selection of function overloads. Reproduced the failure on Linux
using GCC 4.8.4, and confirmed that with the new patch the tests
path on GCC as well as MSVC. So hopefully this fixes everything.
llvm-svn: 284436
raw_ostream has not afforded a lot of flexibility in terms of
how to format numbers when outputting. Wrap this all up into
a set of low level helper functions that can be used to output
numbers with arbitrary precision, alignment, format, etc and
then update raw_ostream to use these functions.
This will be useful for upcoming improvements to llvm's string
formatting libraries, but are still useful independently.
Differential Revision: https://reviews.llvm.org/D25497
llvm-svn: 284425
Based on post-commit review for D25585/r284180, rename
hardware_physical_concurrency to heavyweight_hardware_concurrency,
to better reflect what type of tasks it should be used for and
to enable other systems to map this to something other than the
number of physical cores.
llvm-svn: 284390
/../foo is still a proper path after removing the dotdot. This should
now finally match https://9p.io/sys/doc/lexnames.html [Cleaning names].
llvm-svn: 284384
Ideally these would actually check that the results are reasonable,
but given that we're looping over so many different kinds of path that
isn't really practical.
llvm-svn: 284350
Summary:
This will be used by ThinLTO to set the amount of backend
parallelism, which performs better when restricted to the number
of physical cores (on X86 at least, where getHostNumPhysicalCores is
currently defined). If not available this falls back to
thread::hardware_concurrency.
Note I didn't add to the thread class since that is a typedef to
std::thread where available.
Reviewers: mehdi_amini
Subscribers: beanz, llvm-commits, mgorny
Differential Revision: https://reviews.llvm.org/D25585
llvm-svn: 284180
Summary:
For now I have only added support for x86_64 Linux, but other systems
can be added incrementally.
This is to be used for setting the default parallelism for ThinLTO
backends (instead of thread::hardware_concurrency which includes
hyperthreading and is too aggressive). I'll send this as a follow-on
patch, and it will fall back to hardware_concurrency when the new
getHostNumPhysicalCores returns -1 (when not supported for a given
host system).
I also added an interface to MemoryBuffer to force reading a file
as a stream - this is required for /proc/cpuinfo which is a special
file that looks like a normal file but appears to have 0 size.
The existing readers of this file in Host.cpp are reading the first
1024 or so bytes from it, because the necessary info is near the top.
But for the new functionality we need to be able to read the entire
file. I can go back and change the other readers to use the new
getFileAsStream as a follow-on patch since it seems much more robust.
Added a unittest.
Reviewers: mehdi_amini
Subscribers: beanz, mgorny, llvm-commits, modocache
Differential Revision: https://reviews.llvm.org/D25564
llvm-svn: 284138
This should allow users of the library to get a range to iterate through
all the subcommands that are registered to the global parser. This
allows users to define subcommands in libraries that self-register to
have dispatch done at a different stage (like main). It allows for
writing code like the following:
for (auto *S : cl::getRegisteredSubcommands()) {
if (*S) {
// Dispatch on S->getName().
}
}
This change also contains tests that show this usage pattern.
Reviewers: zturner, dblaikie, echristo
Subscribers: llvm-commits, mehdi_amini
Differential Revision: https://reviews.llvm.org/D24489
llvm-svn: 283296
This should allow users of the library to get a range to iterate through
all the subcommands that are registered to the global parser. This
allows users to define subcommands in libraries that self-register to
have dispatch done at a different stage (like main). It allows for
writing code like the following:
for (auto *S : cl::getRegisteredSubcommands()) {
if (*S) {
// Dispatch on S->getName().
}
}
This change also contains tests that show this usage pattern.
Reviewers: zturner, dblaikie, echristo
Subscribers: llvm-commits, mehdi_amini
Differential Revision: https://reviews.llvm.org/D24489
llvm-svn: 281290
mapping a yaml field to an object in code has always been
a stateless operation. You could still pass state by using the
`setContext` function of the YAMLIO object, but this represented
global state for the entire yaml input. In order to have
context-sensitive state, it is necessary to pass this state in
at the granularity of an individual mapping.
This patch adds support for this type of context-sensitive state.
You simply pass an additional argument of type T to the
`mapRequired` or `mapOptional` functions, and provided you have
specialized a `MappingContextTraits<U, T>` class with the
appropriate mapping function, you can pass this context into
the mapping function.
Reviewed By: chandlerc
Differential Revision: https://reviews.llvm.org/D24162
llvm-svn: 280977
Crash was possible if match() method
was called on object that was moved or object
created with empty constructor.
Testcases updated.
DIfferential revision: https://reviews.llvm.org/D24123
llvm-svn: 280473
If we failed to commit the buffer but did not die to a signal, the temp
file would remain on disk on Windows. Having an open file mapping and
file handle prevents the file from being deleted. I am choosing not to
add an assertion of success on the temp file removal, since virus
scanners and other environmental things can often cause removal to fail
in real world tools.
Also fix more temp file leaks in unit tests.
llvm-svn: 280445
This is useful when need to defer the construction,
e.g. using Regex as a member of class.
Differential revision: https://reviews.llvm.org/D24101
llvm-svn: 280339
Davide Italiano