See http://lists.llvm.org/pipermail/llvm-dev/2020-April/140549.html
For the record, GNU ld changed to 64k max page size in 2014
https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=7572ca8989ead4c3425a1500bc241eaaeffa2c89
"[RFC] ld/ARM: Increase maximum page size to 64kB"
Android driver forced 4k page size in AArch64 (D55029) and ARM (D77746).
A binary linked with max-page-size=4096 does not run on a system with a
higher page size configured. There are some systems out there that do
this and it leads to the binary getting `Killed!` by the kernel.
In the non-linker-script cases, when linked with -z noseparate-code
(default), the max-page-size increase should not cause any size
difference. There may be some VMA usage differences, though.
Reviewed By: psmith, MaskRay
Differential Revision: https://reviews.llvm.org/D77330
The new behavior matches GNU objdump. A pair of angle brackets makes tests slightly easier.
`.foo:` is not unique and thus cannot be used in a `CHECK-LABEL:` directive.
Without `-LABEL`, the CHECK line can match the `Disassembly of section`
line and causes the next `CHECK-NEXT:` to fail.
```
Disassembly of section .foo:
0000000000001634 .foo:
```
Bdragon: <> has metalinguistic connotation. it just "feels right"
Reviewed By: rupprecht
Differential Revision: https://reviews.llvm.org/D75713
There are still problems after the fix in
"[ELF][ARM] Fix regression of BL->BLX substitution after D73542"
so let's revert to get trunk back to green while we investigate.
See https://reviews.llvm.org/D73542
This reverts commit 5461fa2b1f.
This reverts commit 0b4a047bfb.
D73542 made a typo (`rel.type == R_PLT_PC`; should be `rel.expr`) and introduced a regression:
BL->BLX substitution was disabled when the target symbol is preemptible
(expr is R_PLT_PC).
The two added bl instructions in arm-thumb-interwork-shared.s check that
we patch BL to BLX.
Fixes https://bugs.chromium.org/p/chromium/issues/detail?id=1047531
Port the D64906 technique to ARM. It deletes 3 alignments at
PT_LOAD boundaries for the default case: the size of an arm binary
decreases by at most 12kb.
Reviewed By: grimar
Differential Revision: https://reviews.llvm.org/D66749
llvm-svn: 370049
llvm-objdump can switch between ARM/Thumb states after D60927.
In a few lld tests, we run both
* llvm-objdump -d -triple=thumbv7a-none-linux-gnueabi %t
* llvm-objdump -d -triple=armv7a-none-linux-gnueabi %t
to test ARM/Thumb parts of the same file. In many cases we can just
run one command. There is a problem that prevents us from cleaning
more tests (e.g. test/ELF/arm-thumb-interwork-thunk.s):
In llvm-objdump, while we have ARM/Thumb (primary and secondary)
MCDisassembler and MCSubtargetInfo, we have just one MCInstrAnalysis
which is used to resolve the targets of calls in both ARM/Thumb parts.
// ThumbMCInstrAnalysis evaluating ARM parts or ARMMCInstrAnalysis evaluating Thumb parts
// will have incorrect offsets.
// An example of llvm-objdump -d -triple=thumbv7a on ARM part:
1304: 3d ff ff fa blx #-780 # no <...>
1308: 06 00 00 ea b #24 <arm_caller+0x24> # wrong target due to wrong offset
Reviewed By: peter.smith
Differential Revision: https://reviews.llvm.org/D66539
llvm-svn: 369535
This improves readability and the behavior is consistent with GNU objdump.
The new test test/tools/llvm-objdump/X86/disassemble-section-name.s
checks we print newlines before and after "Disassembly of section ...:"
Differential Revision: https://reviews.llvm.org/D61127
llvm-svn: 359668
Old: PT_LOAD(.data | PT_GNU_RELRO(.data.rel.ro .bss.rel.ro) | .bss)
New: PT_LOAD(PT_GNU_RELRO(.data.rel.ro .bss.rel.ro) | .data .bss)
The placement of | indicates page alignment caused by PT_GNU_RELRO. The
new layout has simpler rules and saves space for many cases.
Old size: roundup(.data) + roundup(.data.rel.ro)
New size: roundup(.data.rel.ro + .bss.rel.ro) + .data
Other advantages:
* At runtime the 3 memory mappings decrease to 2.
* start(PT_TLS) = start(PT_GNU_RELRO) = start(RW PT_LOAD). This
simplifies binary manipulation tools.
GNU strip before 2.31 discards PT_GNU_RELRO if its
address is not equal to the start of its associated PT_LOAD.
This has been fixed by https://sourceware.org/git/gitweb.cgi?p=binutils-gdb.git;h=f2731e0c374e5323ce4cdae2bcc7b7fe22da1a6f
But with this change, we will be compatible with GNU strip before 2.31
* Before, .got.plt (non-relro by default) was placed before .got (relro
by default), which made it impossible to have _GLOBAL_OFFSET_TABLE_
(start of .got.plt on x86-64) equal to the end of .got (R_GOT*_FROM_END)
(https://bugs.llvm.org/show_bug.cgi?id=36555). With the new ordering, we
can improve on this regard if we'd like to.
Reviewers: ruiu, espindola, pcc
Subscribers: emaste, arichardson, llvm-commits, joerg, jdoerfert
Differential Revision: https://reviews.llvm.org/D56828
llvm-svn: 356117
Older Arm architectures do not support the MOVT and MOVW instructions so we
must use an alternative sequence of instructions to transfer control to the
destination.
Assuming at least Armv5 this patch adds support for Thunks that load or add
to the program counter. Note that there are no Armv5 Thumb Thunks as there
is no Thumb branch instruction in Armv5 that supports Thunks. These thunks
will not work for Armv4t (arm7tdmi) as this architecture cannot change state
from using the LDR or ADD instruction.
Differential Revision: https://reviews.llvm.org/D50077
llvm-svn: 340160
A more efficient PLT sequence can be used when the distance between the
.plt and the end of the .plt.got is less than 128 Megabytes, which is
frequently true. We fall back to the old sequence when the offset is larger
than 128 Megabytes. This gives us an alternative to forcing the longer
entries with --long-plt as we gracefully fall back to it as needed.
See ELF for the ARM Architecture Appendix A for details of the PLT sequence.
Differential Revision: https://reviews.llvm.org/D41246
llvm-svn: 320987
The existing names for the ARM and Thumb Thunks highlight their current
use as interworking Thunks. These Thunks can also be used for range
extension Thunks where there is no state change. This change makes the name
more generic so it is suitable for range extension.
Differential Revision: https://reviews.llvm.org/D31605
llvm-svn: 299418
Patch to fix lld tests after my llvm-objdump patch to fix branch labels for
Thumb targets.
Reviewed by: emaste
Differential Revision: https://reviews.llvm.org/D30986
llvm-svn: 298055
Thunks are now implemented by redirecting the relocation to the
symbol S, to a symbol TS in a Thunk. The Thunk will transfer control
to S. This has the following implications:
- All the side-effects of Thunks happen within createThunks()
- Thunks are no longer stored in InputSections and Symbols no longer
need to hold a pointer to a Thunk
- The synthetic Thunk sections need to be merged into OutputSections
This implementation is almost a direct conversion of the existing
Thunks with the following exceptions:
- Mips LA25 Thunks are placed before the InputSection that defines
the symbol that needs a Thunk.
- All ARM Thunks are placed at the end of the OutputSection of the
first caller to the Thunk.
Range extension Thunks are not supported yet so it is optimistically
assumed that all Thunks can be reused.
This is a recommit of r293283 with a fixed comparison predicate as
std::merge requires a strict weak ordering.
Differential revision: https://reviews.llvm.org/D29327
llvm-svn: 293757
Thunks are now implemented by redirecting the relocation to the
symbol S, to a symbol TS in a Thunk. The Thunk will transfer control
to S. This has the following implications:
- All the side-effects of Thunks happen within createThunks()
- Thunks are no longer stored in InputSections and Symbols no longer
need to hold a pointer to a Thunk
- The synthetic Thunk sections need to be merged into OutputSections
This implementation is almost a direct conversion of the existing
Thunks with the following exceptions:
- Mips LA25 Thunks are placed before the InputSection that defines
the symbol that needs a Thunk.
- All ARM Thunks are placed at the end of the OutputSection of the
first caller to the Thunk.
Range extension Thunks are not supported yet so it is optimistically
assumed that all Thunks can be reused.
Differential Revision: https://reviews.llvm.org/D29129
llvm-svn: 293283
Mapping symbols allow a mapping symbol aware disassembler to
correctly disassemble the PLT when the code immediately prior to the
PLT is Thumb.
To implement this we add a function to add symbols with local
binding to be defined in SyntheticSymbols.
Differential Revision: https://reviews.llvm.org/D28956
llvm-svn: 293044
This is in preparation for my next change, which will introduce a relro
nobits section. That requires that relro sections appear at the end of the
progbits part of the r/w segment so that the relro nobits section can appear
contiguously.
Because of the amount of churn required in the test suite, I'm making this
change separately.
llvm-svn: 291523
In a shared library an undefined symbol is implicitly imported. If the
symbol is called as a function a PLT entry is generated for it. When the
caller is a Thumb b.w a thunk to the PLT entry is needed as all PLT
entries are in ARM state.
This change allows undefined symbols to have thunks in the same way that
shared symbols may have thunks.
llvm-svn: 290951
Tobias Hieta